February 28

Mppt pure sine wave 600W 1.2KW grid tie micro inverter Power line communication

Mppt pure sine wave 600W 1.2KW grid tie micro inverter Power line communication
Mppt pure sine wave 600W 1.2KW grid tie micro inverter Power line communication
Mppt pure sine wave 600W 1.2KW grid tie micro inverter Power line communication
Mppt pure sine wave 600W 1.2KW grid tie micro inverter Power line communication
Mppt pure sine wave 600W 1.2KW grid tie micro inverter Power line communication
Mppt pure sine wave 600W 1.2KW grid tie micro inverter Power line communication
Mppt pure sine wave 600W 1.2KW grid tie micro inverter Power line communication
Mppt pure sine wave 600W 1.2KW grid tie micro inverter Power line communication
Mppt pure sine wave 600W 1.2KW grid tie micro inverter Power line communication
Mppt pure sine wave 600W 1.2KW grid tie micro inverter Power line communication
Mppt pure sine wave 600W 1.2KW grid tie micro inverter Power line communication
Mppt pure sine wave 600W 1.2KW grid tie micro inverter Power line communication

Mppt pure sine wave 600W 1.2KW grid tie micro inverter Power line communication
600W 1.2KW grid tie micro inverter. WVC-1200(600) Using IP65 waterproof streamline design, Can effectively prevent rainwater on the surface erosion, Built-in high-performance Maximum Power Point Tracking(MPPT)Function, Better able to track changes in the solar luminosity and control different output power, Effectively capture and collect sunlight. AC electric power transmission using the reverse transmission technology, Is one of our patented technology, The inverter output power can provide load priority use, Extra electricity to the grid, Efficient use of the inverter to the power emitted, Electricity transmission rate of up to 99%. Communication using two modes, Between the inverter and Collector Using power line carrier communication signals, Collector with a PC or other devices to communicate Using RS232 serial port/ WIFI wireless communication. Intelligent monitoring systems, The inverter can collect real-time data, Inverter can be controlled startup / shutdown / power regulation. High performance maximum power point tracking (MPPT). Input /output is fully isolated to protect the electrical safety. Simplify maintenance (user serviceable). Operation and maintenance costs low. WVC600W 110V / 220V. WVC1200W 110V / 220V. Recommend use PV panels. 600W / Vmp>34V / Voc<50V. 4300W / Vmp>34V / Voc<50V. DC MAX input current. AC MAX output power. DC MAX Open-circuit input-voltage. DC input voltage range. MAX output power factor. DC input Reverse voltage protection. AC output voltage range. 49.3-50.5 Hz / 59.3-60.5Hz. Output short circuit protection. Power line carrier-current communication. DIN VDE 1026 UL1741. CE National patent technology. Please install the inverters according to the user manual and connnet the groud safety. Forbid openning the shell with non-professional person , only qualified maintenance person can repair the product. The inverter should be installed in the low humidity and well ventilated place, and remove the flammable things surrounding the inverter for avoiding overheating. Avoid children play when the inverter is working. Ensure the DC input and AC output when connect with PV. The Vmp and Voc of PV should be fuit for the prodcut for get output max. One waterproof inverter which power and output voltage you can select. 1 pouch of screw for micro inverter installation. To worldwide: Small items (< 2 kg). The goods > 2 kg. OEM and ODM services are both available. We would like to be your best supplier in China. The item “Mppt pure sine wave 600W 1.2KW grid tie micro inverter Power line communication” is in sale since Friday, May 29, 2015. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “sunlight200514″ and is located in CN. This item can be shipped to North, South, or Latin America, to all countries in Europe, to all countries in continental Asia, to Australia.
  • Model: AC 80-160V
  • Brand: kaideng
  • MPN: Does Not Apply
  • Country/Region of Manufacture: China

Mppt pure sine wave 600W 1.2KW grid tie micro inverter Power line communication
Category: mppt | Comments Off
February 28

2500W Grid tie power inverter DC 52V-88V to AC 110V, MPPT for solar

2500W Grid tie power inverter DC 52V-88V to AC 110V, MPPT for solar
2500W Grid tie power inverter DC 52V-88V to AC 110V, MPPT for solar
2500W Grid tie power inverter DC 52V-88V to AC 110V, MPPT for solar
2500W Grid tie power inverter DC 52V-88V to AC 110V, MPPT for solar
2500W Grid tie power inverter DC 52V-88V to AC 110V, MPPT for solar
2500W Grid tie power inverter DC 52V-88V to AC 110V, MPPT for solar

2500W Grid tie power inverter DC 52V-88V to AC 110V, MPPT for solar
2500W Grid tie power inverter. DC 52V-88V to AC 110V. For solar panel 48V system (best solar panel working voltage 72V76V). Power jack grid tie inverter is designed for solar panel energy market, it’s suitable for family energy system. This inverter can directly use with solar panel through inverter to home grid. Easy to install, just connect with solar panels, grid tie inverter, then directly can put into home grid. If there are no DC sources ie. In the night, no sun light or raining day, the red led light will turn on, the inverter will stop working, the home grid power will not back to inverter to protect the inverters pcb board. DC 52-88 Volt (solar panel). No Load current Draw. 55 C ± 5. Dimensions (L x W x H /cm). 30 23 16 CM. The inverter are designed for solar panels energy directly , no need battery! For battery, 24V battery for DC 14V-24V inverter; 36V for DC 28V-48V inverter, but please do NOT hook inverter with battery banks for a long time , it will burn the parts of inverter over a period of time. If you want to connect with wind turbine, need connect with a dump load controller, 12v controller for DC 14V-24V inverter; 24V controller for DC 28V-48V inverter; 36V controller for DC 50V-100V inverter. Sometimes, if you are using some heaving appliance like motor, engine, cause the voltage up down very fast, in this moment, big amp will come into the grid inverter, easy to cause the ac mos burned, so surge protector will cut down by itself to protect the grid inverter. You may have experience, when meet the big lightning, the power source of the home appliance may damage, same reason, will also cause the inverter damage, in this moment the lightning protection can release thousand voltages to protect the inverter not damage. High speed AC fuses. Now we put ac fuse outside, each inverter will come our special ac fuse, this will be broken 1 mini/sec, to make sure high voltage spike come in! Is designed for small solar panel & wind energy market, it’s suitable for family energy system. This inverter can directly use solar panel, wind charger through inverter to home grid. Easy to installation, just need solar panel, grid tie inverter, then directly can put into home grid. The inverter can be connected to any outlet in the home providing line power. The inverter IC will monitors the voltage, frequency and phase of the home grid, then produce a pure sine wave phase locked to the grid. The voltage will be just enough higher than the grid’s to feed power into the grid, Then using our current controlled PWM we control the output power to the grid. The inverter will put out power when the home grid is on. The inverter will stop feeding power into the grid when the grid is down, for safety and as required by law. Why should you use a grid tie inverter? When you use power from solar panels to supply the inverter, your home power. Meter will run more slowly(if you are using other electric appliances), or your. Home power meter will run backward(if you are not use any appliances). Why should you use a Power Jack grid tie inverter. In traditional grid tie inverters, the solar panels are connect in series so if one solar panel did not work or had poor efficiency or had a blown bypass diode, then the whole system is affected. With Power Jack inverters, you can use all panels in parallel so if one is not working properly, you only lose the output from that one panel. You can also run several Power Jack inverters parallel instead of having one large expensive unit. If you have just one expensive inverter and it fails you produce no power. If you have several smaller units and one fails you still produce power. Each inverter has it’s own MPPT function so you can extract the maximum power from all of your solar panels. When the dc charge function is normal, the inverter supplies power. If there are no dc sources (like at night or a cloudy or rainy day), the inverter will stop attempting to supply power and shut itself off from the power grid to protect itself and lengthen its lifetime. For DC 14V-24V inverter. For DC 28V-48V inverter. For DC 50V-88V inverter. For DC 102V-158V inverter. 11.5V – 13.5V. Orange light on, fan keep working, but inverter stop working. Green flash faster and more powerful output. Manufacture defects or workmanship, use appropriately, surface of item do not scratch. Manufacture defects or workmanship excludes damage caused by inappropriately used such as improper installation, accident, misuse, abuse, improper storage, or any unauthorized disassembly, repair, or modification. My solar panels are 210W 5 pcs, should I use 5 panels on one inverter or 4 panels. I live in the USA and we use 110V or 220V at 60 cycles. Should I use 1200W grid tie power inverter DC 14V-24V to AC 220V with LCD power meter for solar or 1200W grid tie inverter DC 28V-48V to AC 110V with LCD meter for my solar panels? Should I run them in set of two and double the voltage to 57.7? I like to set it up where I can get the most out of the inverters and the panels, your comments will be highly appreciated. You can use our 1200W grid tie power inverter DC 28V-48V TO AC 220V 60HZ due to below reasons. Your solar panels no load voltage are 35V, and 28V after loading, then the above DC range is just fit it. You can use 5 pcs solar panel and connect them in parallel(DC voltage will be 28V). Then connect them with 1 unit 1200W grid tie power inverter. Regarding use AC 220V system inverter, most home main AC power is 220V. In United States, then separate to 110V(sockets on wall), so you can connect the inverter to home main power (220V) directly. It is ok to use AC 110V inverter, just plug into any home AC 110V socket, but might lose 5-10% power. Q: how to connect Power Jack grid tie inverter? A: inverters DC side connect with solar panels, then the inverter’s plug just plug into home AC socket, and turn on inverter to start work. It is easy to use and no need to add controller. Q: Can solar panels can be hook in series or in parallel? A: solar panels can be hook in series or in parallel, if solar panels are in same voltage, they can be hook in series or in parallel. But if solar panels not in same voltage, they only can be hook in series, can not hook in parallel. Q: Can your grid tie power inverter can be hook together? A: yes, our grid tie power inverter can be connect in parallel, but must be same version. The item “2500W Grid tie power inverter DC 52V-88V to AC 110V, MPPT for solar” is in sale since Thursday, February 11, 2016. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “6apex_2012″ and is located in warehouse. This item can be shipped worldwide.
  • Brand: POWER JACK
  • Model: 2500w
  • MPN: does not apply
  • Country/Region of Manufacture: China

2500W Grid tie power inverter DC 52V-88V to AC 110V, MPPT for solar
Category: 2500w | Comments Off