New Wind Power Grid Tie Inverter With Limiter /dump Load Controller 2000w 1000w

2000w 1000w Wind Power Grid Tie Inverter With Limiter /dump Load Controller/resi. 2000W 1000W Wind Power Grid Tie Inverter with Limiter /Dump Load Controller/Resistor for 3 Phase 48v 60v wind turbine generator –Max Efficiency:>92% MPPT Efficiency:99% –3PHASE AC 45V-90V –AC 220V 230V 240V 50hz 60hz NEW 1000W 2000W Wind Power Grid Tie Inverter Max Efficiency:>92% MPPT Efficiency:99% 1. Low cost and easy installation 2. Directly connect to three phase wind turbine 3. Much better output waveform compare with similiar GTI 4. Improving the efficiency of the entire solar power system Overload protection, Anti-island protection Short-circuit protection/Reverse polarity protection 5. AC output voltage and current THD. Input AC/DC Voltage Range. AC Output Voltage Range. Dimensions (W x H x D). (1) (2) Dump load resistor connection Terminal. This terminals will connect to the dump load resistor. (3) AC socket, This socket will connect the inverter to the public grid via the AC cable. This terminals will connect to the wind turbine. Inverter Display Instruction The Inverter display can show many information, The main interface of the display and the icons explainations are show above. The inverter also integrate with internal limiter and external limiter function which can prevent excess power from going to the public grid. Select the internal limiter mode, inverter will work under limiter mode, output power of the inverter will be determined by load power. Select the external limiter mode, inverter need a external limiter module working with it. For more details about the limiter function, pls contact supplier. This function only useful with limiter type inverter. Power View: In this interface, the display shows real time power, PV input voltage, inside temperature, date and time. Clock And Date Setting: Set the clock and date in this page, save the setting before exit. Notes: Save the setting after you reconfigurate the working mode or backlight setting. Notes: Battery Discharge Current Mode And Battery Discharge Power Mode are not developed yet for this wind inverter. Grid Waveform: This interface will show the real time grid waveform. The grid voltage and frequency also will show in this interface. Energy Menu: The energy interface will show the power generation curve everyday. Today KWH and Total KWH are also show in this page. AC Output Current Waveform and PF Test Of 2000W Model Tested 2000W model at nearly full load, Output current waveform shows good pure sine wave in oscilloscope, PF value also shows in good result, 99.8% PF value. Advanced patented technology, MPPT efficiency is higher. High-quality imported components, more stable quality, lower failure rate. Significantly longer life, more than 10 years. Each inverter need to pass twice testing (20 hours) before leaving factory. Low cost and easy installation. Combination of SGPV does not interact. Improving the efficiency of the entire solar power system. The product came very well packaged. I’m very happy. Thank you for everything. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “best-shopping-with-us” and is located in this country: CN. This item can be shipped worldwide.

Color: Only Inverter
Input Voltage: 3phase Ac 22-65v
Output Voltage: 1000W 90-260VAC
Socket Type: US
Origin: Mainland China
Brand: Unbranded
Type: Charger/Inverter
Current Type: AC/DC
System Configuration: Grid-Tie
Power Source: Wind
Output Type: Single
Output Current: 0-20a
Model Number: Teg-1000g-wal, Teg-2000g2-wal
Is_customized: Yes
Output Frequency: 46hz ~ 65hz

Category: wind | Comments Off

May 24

700W Solar Grid Tie Micro Inverter For Solar Panel Grid Tie Inverter Waterproof

Description An inverter can efficiently turn the direct current generated by solar panels into the alternating current used by household appliances. This micro inverter makes it easier. Made of fine aluminum alloy, this IP65 waterproof inverter has a wide range of functions, good safety, convenient installation, and high-cost performance. We believe this inverter will not disappoint you. Key Features Premium Material: The inverter is made of aluminum alloy, which is durable, corrosion-resistant, and not easy to rust. You can use it for a long time without frequent replacement, and your cost can be saved. High Efficiency: The inverter has built-in high-precision maximum power point tracking, which can optimize the power collection from the solar panel, accurately capture and lock th. 700W Solar Grid Tie Micro Inverter For Solar Panel Grid Tie Inverter Waterproof. An inverter can efficiently turn the direct current generated by solar panels into the alternating current used by household appliances. The inverter is made of aluminum alloy, which is durable, corrosion-resistant, and not easy to rust. The inverter has built-in high-precision maximum power point tracking, which can optimize the power collection from the solar panel, accurately capture and lock the maximum output power point, and greatly increase power generation to more than 25%. In addition, the efficient power reverse transmission technology can transmit the power that can not be used up to the grid in the reverse direction to other places for use, and the power transmission rate can reach 99.9%. The inverter is equipped with an LCD display screen to monitor voltage, power, frequency, current, etc. So you can see the machine clearly in operation. The inverter adopts intelligent soft switching technology, high-frequency switching power supply technology, and 32-bit DSP full digital SPWM control technology, making the product strong anti-interference ability, fast operation speed, high intelligence, and a powerful functional system, which can meet the needs of users. The output and input of the system are completely electrically isolated, the insulation performance of the entire power distribution system is good, and the fully isolated booster circuit is safer and more reliable. The inverter has six protection functions: over-temperature protection, under-voltage alarm, under-voltage protection, over-voltage protection, short circuit protection, overload protection, etc. Besides, the IP65 waterproof design can prevent rain from eroding its surface, so you can use it with confidence. After the installation of the power station, you don’t need to do maintenance work. After a long period of use, you only need to remove the dust from the photovoltaic panel. With a size of 8.392.289.84inch, the inverter adopts high-frequency telephone, micro processing, and other technologies, so it is smaller, lighter, and won’t occupy too much space. During installation, you can stack multiple inverters at will, form a single-phase parallel stacking system, or conveniently form a three-phase system to provide a three-phase AC. We have been working hard to provide better service and quality for our customers, which is our goal. If there is any quality problem with our inverters. The inverter is equipped with two gaskets to help you install the photovoltaic support, making the inverter more stable. The inverter is provided with heat dissipation holes, which can play a good role in heat dissipation and prolong the service life of the inverter. This product is applicable to 30V or 36V solar panels, 36V batteries. The inverter can be widely used in residential or commercial areas for turning the direct current generated by solar panels into alternating current. Step 1: Install the inverter on the support of the photovoltaic panel with the screws provided by the machine. Step 2: Connect the positive and negative poles of the DC connection plug on the photovoltaic panel to the DC input terminal of the inverter. Step 3: Open the waterproof cover of the AC output interface of the inverter and connect the AC cable to the AC waterproof plug. Step 4: Connect the AC output cable to the AC main cable. Step 5: Repeat steps 1 to 3 to install and connect all inverters. Step 6: Connect the AC main cable to the public grid and start your green energy journey. Plug Type: US Standard. Maximum Input DC Voltage: 54V. Peak Power Tracking Voltage: 22-45V. Operating Voltage Range: 17-50V. Min/Max Start-up Voltage: 22-50V. Maximum DC Short Circuit Current: 40A. Maximum Input Operating Current: 30A. Output Peak Power: 700watt. Rated Output Power: 650watt. Rated Output Current: 6.36A. Rated Voltage Range: 80-160VAC. Rated Frequency Range: 57-62.5Hz. Number of Circuit Connections Per String: 6. Static MPPT Efficiency: 99.5%. Maximum Output Efficiency: 91.2%. Night Time Power Loss. Communication Mode: Power Line Carrier. Power Transmission Mode: Reverse Transmission, Load Priority. Gross Weight: 2.48kg/5.47lbs. Net Weight: 1.63kg/3.59lbs. Product Size: 21.35.825cm/8.392.289.84inch. Package Size: 342411.5cm/13.399.454.53inch. 1 Solar Grid Tie Micro Inverter. Other Accessories for Installation. Please install the inverter correctly according to the instructions. If you have any questions, please contact the relevant personnel. Please don’t dismantle the machine. Only qualified maintenance personnel can repair the inverter. Please install the inverter in a place with low humidity and good ventilation to avoid overheating the inverter and remove the surrounding inflammable and explosives. When using this inverter, please take good care of your children to prevent them from touching and playing to avoid electric shock. Please Notess that our products are grid-connected, the AC output port has to be connected to the home grid in order to achieve grid-connected power generation. When the input load is with solar panels, it is important that the VOC voltage is between 30-48V. We recommend that the solar panel is configured for 20% more power than the power of the product. For example, if the product is 600W, the total power of the solar panels should be between 700-750W. When the input load is a battery, we recommend a battery voltage of 36V, which can be connected in series with 3 12V batteries. Please Notess that the positive and negative polarity should not be reversed when connecting the product. The recommended battery current is 36V/10mah for 300W, 36V/20mah for 600W, and 36V/40-45mah for 1200W. The input and output voltage of the configuration is within the normal operating voltage range of the product in order for the product to work properly and achieve grid-connected power generation. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement. Please make sure you do not mind before you order. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. Nice and Practical, High Quality Packaging. Applicable to 30V or 36V solar panels, 36V batteries. Maximum Input DC Voltage. Peak Power Tracking Voltage. Maximum DC Short Circuit Current. Maximum Input Operating Current. Number of Circuit Connections Per String. Reverse Transmission, Load Priority. 21.35.825cm/8.392.289.84inch. Solar Grid Tie Micro Inverter. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “yybshop03″ and is located in this country: US. This item can be shipped to United States.

Features: High quality W/ warranty!
Application: Applicable to 30V or 36V solar panels, 36V batteries
Current Output: /
Current Type: /
System Configuration: /
Current Rating: /
Charging Mode: /
Resistance Properties: /
Model: WVC-700W
Color: Silver
Material: Aluminium Alloy
Power: 700W
Voltage: 110V
Plug Type: US Standard
Maximum Input DC Voltage: 54V
Peak Power Tracking Voltage: 22-45V
Operating Voltage Range: 17-50V
Min/Max Start-up Voltage: 22-50V
Maximum DC Short Circuit Current: 40A
Maximum Input Operating Current: 30A
Output Peak Power: 700watt
Rated Output Power: 650watt
Rated Output Current: 6.36A
Rated Voltage Range: 80-160VAC
Rated Frequency Range: 57-62.5Hz
Power Factor: ＞99%
Number of Circuit Connections Per String: 6
Static MPPT Efficiency: 99.5%
Maximum Output Efficiency: 91.2%
Night Time Power Loss: <1W
Total Flow Distortion: <5%
Operating Temperature Range: ﹣40℃~60℃/﹣40℉~140℉
Waterproof Rating: IP65
Cooling Method: Self-cooling
Communication Mode: Power Line Carrier
Power Transmission Mode: Reverse Transmission, Load Priority
Product Size: 21.3*5.8*25cm/8.39*2.28*9.84inch
Brand: Unbranded
Type: Solar Grid Tie Micro Inverter
Country/Region of Manufacture: China
Recommended Environment: Outdoor

Category: 700w | Comments Off

May 23

Charging My Battery From Almost Anywhere With This Grid Tie Micro Inverter And The Victron Multiplus

Category: charging | Comments Off

May 23

2.5KW Solar Panel Grid Tie DIY kit-With Micro-Inverter & Racking System

2.5KW Solar Panel Grid Tie DIY kit-With Micro-Inverter & Racking System. Optimize your solar investment and create a more resilient energy future. With our new DIY solar kit. It’s a DIY Grid-tie solar kit for an easy installation. It is best for roofs like shingles roof, metal roofs or any other roof type. It works great also we can provide you with all the details regarding DIY installation with all details accordingly as per your requirements. We will provide you the design plans, to prepare design plans we will collect required data from you and provide plan sets which will be guaranteed to be approve by the city and utility. We can also provide the revisions at no cost until your plans get approved from all type of jurisdiction. If there is an engineering structure letter or stamp required, we can also provide that. Longi solar DIY module. Black on black module (perfect for your roof). 2x Micro-inverter (four panels can be installed with one micro-inverter). Wi-Fi cloud monitoring system. Racking system with attachments. Pv cable and connectors, micro-inverter cabling and connectors, utility disconnect box. Grid tie in connectors and roof junction box according to plan set. All you need is wiring and conduit for home run (from array to main service panel or meter). Note: wiring is usually thhn awg 10 or 8 for this kit and conduit you may use is 3/4 or 1 inch emt, pvc or flex liquid tight. ISO 9001:2008: ISO Quality Management System. ISO 14001: 2004: ISO Environment Management System. TS62941: Guideline for module design qualification and type approval. OHSAS 18001: 2007 Occupational Health and Safety. Every component has been tested to the limit and proven in extreme environments. All components evaluated for superior structural performance our approach has led to unique structural features this is also why our products are fully certified. Integrated grounding: ul 2703 system eliminates separate module grounding components. Our microinverters are all built to deliver safety and stability you can count on. Unlike high-voltage string inverter systems, our microinverters operate on less than 60 v dc voltage, supported by 6,000 v surge protection and ip67 enclosure ratings. And with cloud monitoring it also contains individual panel level monitoring, you can spot the signs of a potential problem sooner – and keep your property safe, 24/7. You’ll get industry-leading microinverters with the lowest failure rates and premium components. Easy installation, just plug and play. With reactive power control, compliant with ca rule 21. Nec-2017&nec-2020 690.12 rapid shutdown. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Solar Power Supplies\Solar Panels & Kits”. The seller is “cleanpowerstore” and is located in this country: US. This item can be shipped to United States.

Current Output: 40-49 A
Pliability: Rigid
System Configuration: Grid-Tie
Solar Technology: Monocrystalline
Power Source: Solar
Inverter Technology: Microinverter
Current Rating: 7.01-7.5 A
Wattage: 3000
MPN: LR6-60HPH-315M
Brand: Longi
Current Type: AC/DC
Type: Solar Panel KIt
Voltage: 25.1-30 V
Model: LR6-60HPH-315M
Connector Type: MC4
Recommended Environment: Outdoor
Features: All Daylight Conditions, Monocrystalline, Portable
Charging Mode: MPPT (Maximum Power Point Tracking)
Resistance Properties: Dustproof, Dust Resistant, Waterproof, Water Resistant
Application: Agriculture/Farming, Back-up Power, Home/Garden
Power: 2520
Product Line: Solar kit

Category: 25kw | Comments Off

May 22

Adjustable 600W MPPT Solar Grid Inverter DC 24V 36V 48V Battery Discharge Power

MPPT Solar Grid Tie Inverter 500W 600W Pure Sine Wave for PV Input 16-180V or Battery 12-96V Adjustable Power Output. Upgraded the new adjustable power inverter. 1 It adds a solar panel and battery operation mode switch. 2 In battery mode, the knob can switch from 100W to 380W any mobilization. 3 It adds to record each time you turn off the last set of power. PV open voltage range. PV MAX input power(W). MPPT Voltage range(V). Suitable for Battery voltage(V). Battery Low Voltage Protection(V). PV mode AC MAX output (W). Battery mode Max output power. 220VAC(190-260VAC) or 120VAC(90-135VAC). 50Hz(4852) or 60Hz(5862). Stable real efficiency / 120V. Stable real efficiency / 220V. Islanding; Short-circuit; Low Voltage; Over Voltage; Over temperature Protection. Monocrystalline, polycrystalline, thin-film solar panels. 22.2×16.2×6.5CM. PV grid-connected inverter operating mode. The grid-tied inverter has an automated working order, without needing to monitor. On detection the power output from solar panels, device will decide if the power was large enough to begin the conversion process. Coversion process includes 5 modes, Startup, Grid-tied begin, Standby, Stop, Fault-find. Startup – When the start button is on, solar panel and grid lines both connected in normal condition, inverter enters working condition. Grid-tied begin – Grid-tied begin mode is when inverter starts to convert the Direct Current fed through from PV solar panel to a stable Alternate Current and flow to the utility grid. To enable the maximum output of energy, the device uses MPPT control technology to track sun rays, this technology promises the maximum efficiency under diferent daylight and temperature conditions. Standby – Standby mode is when device detects insufficient power feeding through from the solar panel, or device detects abnormal status such as voltages, frequencies, and temperatures not in the permitted range, the device enters standby mode. Stop – Insufficient sunlight hence insufficient PV power feeding through to the device and device enters into the standby mode, when this condition continues and DC voltages falls below 12V for over 1 minute, the device will enter Stop mode. When error ocurs, fault find indicator starts flashing, device will enter Stop mode. Please see 3.4 error status on LED indicator. Battery (battery) power output adjustment mode. The adjustable knob on the inverter to the right twist, Battery power adjustment mode opens, The right of the blue LED light on, At this point the PV inverter MPPT tracking function automatically turns off, Low output machine output power of about 100W, the adjustable knob slowly twist to the right, with the output power gradually increases, the limited battery adjustable maximum output power of about 75% of the total power of the inverter (for example, 500W inverter defined variable will be around 370W, 600W inverter will be limited to 450W). When the inverter is connected to the battery discharge the battery voltage is too low, The inverter will automatically stop to protect the battery output voltage is not too low, At this point you can not cut off the DC line between the inverter and battery, You can use other independent solar charge controller to the battery charge, When charging the battery is full, When 26 42V inverter connected to 24V battery:The inverter will automatically start and the net output (for example, Battery voltage into about 21V, the machine will automatically shut down, this time with another charge controller to the battery charge, When charged to about 25V, the machine will automatically begin to work), Charging without human intervention. Battery (battery) mode, a plurality of sub-voltage specifications in the following table. Battery Low voltage protection. Battery high voltage protection. Include extra charges for remote area listed by Express companies. All return products should be in original package with all accessories included. We stand behind our products so you are always covered! This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “tricorpower” and is located in this country: CN. This item can be shipped worldwide.

Input Voltage: PV 50-90V Bat 60V
Output Voltage: 110-120V
Current Output: 10 A or Less
System Configuration: Grid-Tie
Maximum Input Power: 501-600 W
Power Source: Solar
Maximum Input Voltage: 161-180 V
Inverter Technology: Microinverter
Custom Bundle: No
Color: Black
Wattage: 500-599 W
Current Rating: 1-5 A
Brand: AFC
Current Type: AC/DC
Type: Charger/Inverter
Connector Type: MC4
Model: ADJ-600W
Recommended Environment: Indoor/Outdoor
Country/Region of Manufacture: China
Charging Mode: MPPT (Maximum Power Point Tracking)
Protection Properties: Anti-island Protection, Lightning Protection, Low Voltage Protection, Overcharge Protection
Power: 501-600 W

Category: adjustable | Comments Off

May 22

NEW 700W Solar Grid Tie Micro Inverter for 30v, 36v Solar Panels Waterproof IP65

NEW 700W Solar Grid Tie Micro Inverter for 30v, 36v Solar Panels Waterproof IP65. An inverter can efficiently turn the direct current generated by solar panels into the alternating current used by household appliances. This micro inverter makes it easier. Made of fine aluminum alloy, this IP65 waterproof inverter has a wide range of functions, good safety, convenient installation, and high-cost performance. We believe this inverter will not disappoint you. The inverter is made of aluminum alloy, which is durable, corrosion-resistant, and not easy to rust. You can use it for a long time without frequent replacement, and your cost can be saved. The inverter has built-in high-precision maximum power point tracking, which can optimize the power collection from the solar panel, accurately capture and lock the maximum output power point, and greatly increase power generation to more than 25%. In addition, the efficient power reverse transmission technology can transmit the power that can not be used up to the grid in the reverse direction to other places for use, and the power transmission rate can reach 99.9%. The inverter is equipped with an LCD display screen to monitor voltage, power, frequency, current, etc. So you can see the machine clearly in operation. The inverter adopts intelligent soft switching technology, high-frequency switching power supply technology, and 32-bit DSP full digital SPWM control technology, making the product strong anti-interference ability, fast operation speed, high intelligence, and a powerful functional system, which can meet the needs of users. The output and input of the system are completely electrically isolated, the insulation performance of the entire power distribution system is good, and the fully isolated booster circuit is safer and more reliable. The inverter has six protection functions: over-temperature protection, under-voltage alarm, under-voltage protection, over-voltage protection, short circuit protection, overload protection, etc. Besides, the IP65 waterproof design can prevent rain from eroding its surface, so you can use it with confidence. After the installation of the power station, you don’t need to do maintenance work. After a long period of use, you only need to remove the dust from the photovoltaic panel. With a size of 8.392.289.84inch, the inverter adopts high-frequency telephone, micro processing, and other technologies, so it is smaller, lighter, and won’t occupy too much space. During installation, you can stack multiple inverters at will, form a single-phase parallel stacking system, or conveniently form a three-phase system to provide a three-phase AC. We have been working hard to provide better service and quality for our customers, which is our goal. If there is any quality problem with our inverters. The inverter is equipped with two gaskets to help you install the photovoltaic support, making the inverter more stable. The inverter is provided with heat dissipation holes, which can play a good role in heat dissipation and prolong the service life of the inverter. This product is applicable to 30V or 36V solar panels, 36V batteries. The inverter can be widely used in residential or commercial areas for turning the direct current generated by solar panels into alternating current. Step 1: Install the inverter on the support of the photovoltaic panel with the screws provided by the machine. Step 2: Connect the positive and negative poles of the DC connection plug on the photovoltaic panel to the DC input terminal of the inverter. Step 3: Open the waterproof cover of the AC output interface of the inverter and connect the AC cable to the AC waterproof plug. Step 4: Connect the AC output cable to the AC main cable. Step 5: Repeat steps 1 to 3 to install and connect all inverters. Step 6: Connect the AC main cable to the public grid and start your green energy journey. Plug Type: US Standard. Maximum Input DC Voltage: 54V. Peak Power Tracking Voltage: 22-45V. Operating Voltage Range: 17-50V. Min/Max Start-up Voltage: 22-50V. Maximum DC Short Circuit Current: 40A. Maximum Input Operating Current: 30A. Output Peak Power: 700watt. Rated Output Power: 650watt. Rated Output Current: 6.36A. Rated Voltage Range: 80-160VAC. Rated Frequency Range: 57-62.5Hz. Number of Circuit Connections Per String: 6. Static MPPT Efficiency: 99.5%. Maximum Output Efficiency: 91.2%. Night Time Power Loss. Communication Mode: Power Line Carrier. Power Transmission Mode: Reverse Transmission, Load Priority. Gross Weight: 2.48kg/5.47lbs. Net Weight: 1.63kg/3.59lbs. Product Size: 21.35.825cm/8.392.289.84inch. Package Size: 342411.5cm/13.399.454.53inch. 1 Solar Grid Tie Micro Inverter. Other Accessories for Installation. Please install the inverter correctly according to the instructions. If you have any questions, please contact the relevant personnel. Please don’t dismantle the machine. Only qualified maintenance personnel can repair the inverter. Please install the inverter in a place with low humidity and good ventilation to avoid overheating the inverter and remove the surrounding inflammable and explosives. When using this inverter, please take good care of your children to prevent them from touching and playing to avoid electric shock. Please note that our products are grid-connected, the AC output port has to be connected to the home grid in order to achieve grid-connected power generation. When the input load is with solar panels, it is important that the VOC voltage is between 30-48V. We recommend that the solar panel is configured for 20% more power than the power of the product. For example, if the product is 600W, the total power of the solar panels should be between 700-750W. When the input load is a battery, we recommend a battery voltage of 36V, which can be connected in series with 3 12V batteries. Please note that the positive and negative polarity should not be reversed when connecting the product. The recommended battery current is 36V/10mah for 300W, 36V/20mah for 600W, and 36V/40-45mah for 1200W. The input and output voltage of the configuration is within the normal operating voltage range of the product in order for the product to work properly and achieve grid-connected power generation. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement. Please make sure you do not mind before you order. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. Applicable to 30V or 36V solar panels, 36V batteries. LCD Display, Digital Control, Electrical Isolation, Safety Guard, Flexible Installation Mode, Small Footprint. Maximum Input DC Voltage. Peak Power Tracking Voltage. Maximum DC Short Circuit Current. Maximum Input Operating Current. Number of Circuit Connections Per String. Reverse Transmission, Load Priority. 21.35.825cm/8.392.289.84inch. Solar Grid Tie Micro Inverter. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “globalauto2018″ and is located in this country: US. This item can be shipped to United States.

Application: Applicable to 30V or 36V solar panels, 36V batteries
Current Output: /
Current Type: /
System Configuration: /
Current Rating: /
Features: LCD Display, Digital Control, Electrical Isolation, Safety Guard, Flexible Installation Mode, Small Footprint:
Charging Mode: /
Resistance Properties: /
Model: WVC-700W
Color: Silver
Material: Aluminium Alloy
Power: 700W
Voltage: 110V
Plug Type: US Standard
Maximum Input DC Voltage: 54V
Peak Power Tracking Voltage: 22-45V
Operating Voltage Range: 17-50V
Min/Max Start-up Voltage: 22-50V
Maximum DC Short Circuit Current: 40A
Maximum Input Operating Current: 30A
Output Peak Power: 700watt
Rated Output Power: 650watt
Rated Output Current: 6.36A
Rated Voltage Range: 80-160VAC
Rated Frequency Range: 57-62.5Hz
Power Factor: ＞99%
Number of Circuit Connections Per String: 6
Static MPPT Efficiency: 99.5%
Maximum Output Efficiency: 91.2%
Night Time Power Loss: <1W
Total Flow Distortion: <5%
Operating Temperature Range: ﹣40℃~60℃/﹣40℉~140℉
Waterproof Rating: IP65
Cooling Method: Self-cooling
Communication Mode: Power Line Carrier
Power Transmission Mode: Reverse Transmission, Load Priority
Product Size: 21.3*5.8*25cm/8.39*2.28*9.84inch
Brand: Unbranded
Type: Solar Grid Tie Micro Inverter

Category: 700w | Comments Off

May 21

MPPT 700W Waterproof IP65 Solar Grid Tie & Off-grid Micro Inverter DC to AC 120V

Specification Material: Aluminum Alloy Color: Silver Model: XJ-WVC-700W Plug: US Standard Voltage: 110V Maximum Input Power: 2 × 350W Recommended Solar Panel: Power 2 × 350W, Open Circuit Voltage 30-50V Maximum Input DC Voltage: 54V Peak Power Tracking Voltage: 22-45V Operating Voltage Range: 17-50V Minimum/Maximum Starting Voltage: 22-50V Maximum DC Short Circuit Current: 40A Maximum Input Working Current: 30A Output Voltage: 120V Output Peak Power: 700W Rated Output Power: 650Watt Rated Output Current: 6.36A Rated Voltage Range: 80-160VAC Rated Frequency Range: 57-62.5Hz Power factor: >99% Number of Connections Per Series Circuit: 6 (Single-phase) Output Efficiency: 120V Static MPPT Efficiency: 99.5% Maximum Output Efficiency: 91.2% Power Loss at Night. Solar Inverter 700W Grid Tie MPPT Pure Sine Wave 120V Waterproof Self Cooling US. Solar Micro Inverter 700W Grid Tie MPPT Pure Sine Wave DC 22-50V to AC 120V Waterproof IP65. Maximum Input Power: 2 × 350W. Recommended Solar Panel: Power 2 × 350W, Open Circuit Voltage 30-50V. Maximum Input DC Voltage: 54V. Peak Power Tracking Voltage: 22-45V. Operating Voltage Range: 17-50V. Minimum/Maximum Starting Voltage: 22-50V. Maximum DC Short Circuit Current: 40A. Maximum Input Working Current: 30A. Output Peak Power: 700W. Rated Output Power: 650Watt. Rated Output Current: 6.36A. Rated Voltage Range: 80-160VAC. Rated Frequency Range: 57-62.5Hz. Number of Connections Per Series Circuit: 6 (Single-phase). Static MPPT Efficiency: 99.5%. Maximum Output Efficiency: 91.2%. Power Loss at Night. Operating Temperature Range: – 40? Heat Dissipation Mode: Self Cooling. Power Grid Disturbance: EN61000-3-2 Safety Regulation EN62109. Grid Detection: DIN VDE 1026 UL1741. Gross Weight: 2.45kg/5.4lbs. Net Weight: 1.8kg/3.96lbs. Package Size: 342411.5cm/13.389.444.52in. Product Size: 21.35.825cm/8.392.289.84in. With a powerful MPPT algorithm and a 99.9% efficient transmission rate, this solar inverter can greatly improve conversion efficiency while providing stable AC power for home appliances. With high-quality materials and multiple protection features, this solar inverter can serve you for a long time. The product’s built-in MPPT Max. Power Point Tracking optimizes power collection from the solar panel and precisely captures and locks the maximum output power point to significantly increase power generation to more than 25%. The 99.9% efficient reverse power transmission technology transmits the power in the reverse direction in grid-connected output mode while automatically detecting the load in the circuit and prioritizing its use, which greatly improves transmission efficiency. Pure Positive Sine Wave. The product uses SPWM to directly generate a pure positive sine wave with good waveform, low distortion, and low noise to make the radio and other communication devices feel better. The inverter dial fast using high-frequency switching power supply technology and 32-bit DSP fully digital SPWM control technology provides the product with excellent. Capability, high-speed computing capability, and intelligence. Grid-connected and Off-grid Stacking Mode. Inverters can be stacked in parallel with any number of units for both grid-connected and off-grid use. After the main monitoring system sends the main control signal the inverter receives the main control signal for synchronous output. The whole power distribution system is well insulated and the output of the system is completely electrically isolated from the input, which makes the use safer and more reliable. Over-temperature protection, under-voltage alarm, under-voltage protection, over-voltage protection, short-circuit protection, and overload protection protect the safety of use in all aspects. Multiple inverters can be stacked arbitrarily, forming a single-phase parallel stacking system or a three-phase system to provide three-phase AC power conveniently. Flexible installation allows for a wider range of applications. The power station only needs to clean the. On the PV panel regularly after installation, which makes it very convenient and quick. The upgraded miniature design makes the product size only 8.392.289.84 inches and net weight only 3.96 pounds, which makes it easy to carry and install. The solar inverter is made of high-quality aluminum alloy, which is very strong, durable, and. To be able to serve you for a long time. High-quality material and stable structure bring the product IP65 excellent. Performance so that it can effectively group the influence of. And water, and can operate stably outdoors. We aim to provide quality products and services. We will reply and solve the problem for you as soon as possible. Rounded and smooth corners can protect hands from scratches for easy installation and portability. Clear LED Display Lamp. Clear LED display lamp allows you to easily understand the status of the product for operation. This solar inverter is mainly used for power stations, schools, and home grid connections. Step 1: Install the inverter on the bracket of the photovoltaic panel with the screws. Step 2: Connect the positive and negative poles of the DC connection plug on the photovoltaic board to the DC input terminal of the inverter. Step 3: Open the. Cover of the AC output connector of the inverter and connect the AC cable to the AC. Step 4: Connect the AC output cable to the AC main cable. Step 5: Repeat steps 1 to 3, install and connect all inverters. Step 6: Connect the AC main cable to the utility grid to start your green energy journey. 1English User Notes Manual. All Accessories Needed for Installation. Please correctly install the inverter according to the instructions. If you have any questions, please contact the relevant personnel. T allowed to disassemble the machine. Only qualified maintenance personnel can repair the product. Please install the inverter in a place with low humidity and good ventilation to avoid overheating of the inverter, and remove flammable and explosive materials around. When using this product, children should not touch or play to avoid electric shock. Connect the solar panel and the DC input of the battery DC power supply cable. Our product is grid-connected power generation. The AC output port must be connected to the home grid to achieve grid-connected power generation. When using solar photovoltaic panels, the VOC voltage must be between 30-48V. It is recommended that the power configured for the solar panel be greater than 20% of the product power. When using the battery, it is recommended that the battery voltage be 36V, and three 12V batteries can be connected in series. When connecting the product, the positive and negative polarity shall not be reversed. For 300W products, the recommended parameter of the battery is 36V/10mah. For 600W products, it is recommended that the battery parameter be 36V/20mah. 1200W product: it is recommended that the battery parameter be 36V/40-45mah. The customer’s configuration parameters, input, and output voltages are within the normal voltage range of the product so that the product can work normally and realize grid-connected power generation. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement. Please make sure you do not mind before you order. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. Reverse Power Transmission, Pure Sine Wave, High-quality Material. Power 2 × 350W. Maximum Input DC Voltage. Peak Power Tracking Voltage. Maximum DC Short Circuit Current. Maximum Input Operating Current. Number of Circuit Connections Per String. Night Time Power Loss. EN61000-3-2 Safety Regulation EN62109. DIN VDE 1026 UL1741. 21.35.825cm/8.392.289.84in. 342411.5cm/13.389.444.52in. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “nanhaipuruite-5″ and is located in this country: US. This item can be shipped to United States.

Features: Reverse Power Transmission，Pure Sine Wave，High-quality Material
Brand: Unbranded
Color: Silver
Power Source: Solar
Type: Charger/Inverter
Model: XJ-WVC-700W
Application: Home/Garden
Voltage: 110V
Power: 700W
Current Rating: 22-50V
Current Type: DC
Resistance Properties: Waterproof
Current Output: 120V
Material: Aluminium Alloy
Plug Type: US Standard
Recommended Solar Panel: Power 2 × 350W
Maximum Input DC Voltage: 54V
Peak Power Tracking Voltage: 22-45V
Min/Max Start-up Voltage: 22-50V
Maximum DC Short Circuit Current: 40A
Maximum Input Operating Current: 30A
Output Peak Power: 700W
Rated Output Power: 650Watt
Rated Output Current: 6.36A
Rated Voltage Range: 80-160VAC
Rated Frequency Range: 57-62.5Hz
Power Factor: ＞99％
Number of Circuit Connections Per String: 6 (Single-phase)
Static MPPT Efficiency: 99.5%
Maximum Output Efficiency: 91.2%
Night Time Power Loss: <1W
Total Flow Distortion: <5%
Operating Temperature Range: – 40 ℃ to+60 ℃
Waterproof Rating: IP65
Cooling Method: Self-cooling
Electromagnetic Compatibility: EN50081.Part1 EN50082.Part1
Power Grid Disturbance: EN61000-3-2 Safety Regulation EN62109
Grid Detection: DIN VDE 1026 UL1741
Net Weight: 1.8kg/3.96lbs
Gross Weight: 2.45kg/5.4lbs
Product Size: 21.3*5.8*25cm/8.39*2.28*9.84in
Package Size: 34*24*11.5cm/13.38*9.44*4.52in

Category: mppt | Comments Off

May 20

700W Solar Grid Tie Micro Inverter Fit Solar Panel Waterproof Grid Tie Inverter

700W Solar Grid Tie Micro Inverter For Solar Panel Grid Tie Inverter Waterproof. An inverter can efficiently turn the direct current generated by solar panels into the alternating current used by household appliances. This micro inverter makes it easier. Made of fine aluminum alloy, this IP65 waterproof inverter has a wide range of functions, good safety, convenient installation, and high-cost performance. We believe this inverter will not disappoint you. The inverter is made of aluminum alloy, which is durable, corrosion-resistant, and not easy to rust. You can use it for a long time without frequent replacement, and your cost can be saved. The inverter has built-in high-precision maximum power point tracking, which can optimize the power collection from the solar panel, accurately capture and lock the maximum output power point, and greatly increase power generation to more than 25%. In addition, the efficient power reverse transmission technology can transmit the power that can not be used up to the grid in the reverse direction to other places for use, and the power transmission rate can reach 99.9%. The inverter is equipped with an LCD display screen to monitor voltage, power, frequency, current, etc. So you can see the machine clearly in operation. The inverter adopts intelligent soft switching technology, high-frequency switching power supply technology, and 32-bit DSP full digital SPWM control technology, making the product strong anti-interference ability, fast operation speed, high intelligence, and a powerful functional system, which can meet the needs of users. The output and input of the system are completely electrically isolated, the insulation performance of the entire power distribution system is good, and the fully isolated booster circuit is safer and more reliable. The inverter has six protection functions: over-temperature protection, under-voltage alarm, under-voltage protection, over-voltage protection, short circuit protection, overload protection, etc. Besides, the IP65 waterproof design can prevent rain from eroding its surface, so you can use it with confidence. After the installation of the power station, you don’t need to do maintenance work. After a long period of use, you only need to remove the dust from the photovoltaic panel. With a size of 8.392.289.84inch, the inverter adopts high-frequency telephone, micro processing, and other technologies, so it is smaller, lighter, and won’t occupy too much space. During installation, you can stack multiple inverters at will, form a single-phase parallel stacking system, or conveniently form a three-phase system to provide a three-phase AC. We have been working hard to provide better service and quality for our customers, which is our goal. If there is any quality problem with our inverters. The inverter is equipped with two gaskets to help you install the photovoltaic support, making the inverter more stable. The inverter is provided with heat dissipation holes, which can play a good role in heat dissipation and prolong the service life of the inverter. This product is applicable to 30V or 36V solar panels, 36V batteries. The inverter can be widely used in residential or commercial areas for turning the direct current generated by solar panels into alternating current. Step 1: Install the inverter on the support of the photovoltaic panel with the screws provided by the machine. Step 2: Connect the positive and negative poles of the DC connection plug on the photovoltaic panel to the DC input terminal of the inverter. Step 3: Open the waterproof cover of the AC output interface of the inverter and connect the AC cable to the AC waterproof plug. Step 4: Connect the AC output cable to the AC main cable. Step 5: Repeat steps 1 to 3 to install and connect all inverters. Step 6: Connect the AC main cable to the public grid and start your green energy journey. Plug Type: US Standard. Maximum Input DC Voltage: 54V. Peak Power Tracking Voltage: 22-45V. Operating Voltage Range: 17-50V. Min/Max Start-up Voltage: 22-50V. Maximum DC Short Circuit Current: 40A. Maximum Input Operating Current: 30A. Output Peak Power: 700watt. Rated Output Power: 650watt. Rated Output Current: 6.36A. Rated Voltage Range: 80-160VAC. Rated Frequency Range: 57-62.5Hz. Number of Circuit Connections Per String: 6. Static MPPT Efficiency: 99.5%. Maximum Output Efficiency: 91.2%. Night Time Power Loss. Communication Mode: Power Line Carrier. Power Transmission Mode: Reverse Transmission, Load Priority. Gross Weight: 2.48kg/5.47lbs. Net Weight: 1.63kg/3.59lbs. Product Size: 21.35.825cm/8.392.289.84inch. Package Size: 342411.5cm/13.399.454.53inch. 1 Solar Grid Tie Micro Inverter. Other Accessories for Installation. Please install the inverter correctly according to the instructions. If you have any questions, please contact the relevant personnel. Please don’t dismantle the machine. Only qualified maintenance personnel can repair the inverter. Please install the inverter in a place with low humidity and good ventilation to avoid overheating the inverter and remove the surrounding inflammable and explosives. When using this inverter, please take good care of your children to prevent them from touching and playing to avoid electric shock. Please note that our products are grid-connected, the AC output port has to be connected to the home grid in order to achieve grid-connected power generation. When the input load is with solar panels, it is important that the VOC voltage is between 30-48V. We recommend that the solar panel is configured for 20% more power than the power of the product. For example, if the product is 600W, the total power of the solar panels should be between 700-750W. When the input load is a battery, we recommend a battery voltage of 36V, which can be connected in series with 3 12V batteries. Please note that the positive and negative polarity should not be reversed when connecting the product. The recommended battery current is 36V/10mah for 300W, 36V/20mah for 600W, and 36V/40-45mah for 1200W. The input and output voltage of the configuration is within the normal operating voltage range of the product in order for the product to work properly and achieve grid-connected power generation. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement. Please make sure you do not mind before you order. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. Stable characteristic, high reliability. Convenient Use, Unique Appearance, Reliable Quality. Applicable to 30V or 36V solar panels, 36V batteries. Maximum Input DC Voltage. Peak Power Tracking Voltage. Maximum DC Short Circuit Current. Maximum Input Operating Current. Number of Circuit Connections Per String. Reverse Transmission, Load Priority. 21.35.825cm/8.392.289.84inch. Solar Grid Tie Micro Inverter. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “yybshop06″ and is located in this country: US. This item can be shipped to United States.

Features: Stable characteristic, high reliability
Feaures: Convenient Use，Unique Appearance，Reliable Quality
Highlights: ★Good Quality Guarantee★
Tip: If you have any question , please contact us
Application: Applicable to 30V or 36V solar panels, 36V batteries
Current Output: /
Current Type: /
System Configuration: /
Current Rating: /
Charging Mode: /
Resistance Properties: /
Model: WVC-700W
Color: Silver
Material: Aluminium Alloy
Power: 700W
Voltage: 110V
Plug Type: US Standard
Maximum Input DC Voltage: 54V
Peak Power Tracking Voltage: 22-45V
Operating Voltage Range: 17-50V
Min/Max Start-up Voltage: 22-50V
Maximum DC Short Circuit Current: 40A
Maximum Input Operating Current: 30A
Output Peak Power: 700watt
Rated Output Power: 650watt
Rated Output Current: 6.36A
Rated Voltage Range: 80-160VAC
Rated Frequency Range: 57-62.5Hz
Power Factor: ＞99%
Number of Circuit Connections Per String: 6
Static MPPT Efficiency: 99.5%
Maximum Output Efficiency: 91.2%
Night Time Power Loss: <1W
Total Flow Distortion: <5%
Operating Temperature Range: ﹣40℃~60℃/﹣40℉~140℉
Waterproof Rating: IP65
Cooling Method: Self-cooling
Communication Mode: Power Line Carrier
Power Transmission Mode: Reverse Transmission, Load Priority
Product Size: 21.3*5.8*25cm/8.39*2.28*9.84inch
Brand: Unbranded
Type: Solar Grid Tie Micro Inverter
Country/Region of Manufacture: China
Recommended Environment: Outdoor

Category: 700w | Comments Off

May 20

047 Richtig G Nstige Und Einfache Hauseinspeisung Aus Batterie Und Powerstation

Category: richtig | Comments Off

May 19

700W, Solar Grid Tie Micro Inverter for 30v or 36v Solar Panels Waterproof IP65

700W, Solar Grid Tie Micro Inverter for 30v or 36v Solar Panels Waterproof IP65. An inverter can efficiently turn the direct current generated by solar panels into the alternating current used by household appliances. This micro inverter makes it easier. Made of fine aluminum alloy, this IP65 waterproof inverter has a wide range of functions, good safety, convenient installation, and high-cost performance. We believe this inverter will not disappoint you. The inverter is made of aluminum alloy, which is durable, corrosion-resistant, and not easy to rust. You can use it for a long time without frequent replacement, and your cost can be saved. The inverter has built-in high-precision maximum power point tracking, which can optimize the power collection from the solar panel, accurately capture and lock the maximum output power point, and greatly increase power generation to more than 25%. In addition, the efficient power reverse transmission technology can transmit the power that can not be used up to the grid in the reverse direction to other places for use, and the power transmission rate can reach 99.9%. The inverter is equipped with an LCD display screen to monitor voltage, power, frequency, current, etc. So you can see the machine clearly in operation. The inverter adopts intelligent soft switching technology, high-frequency switching power supply technology, and 32-bit DSP full digital SPWM control technology, making the product strong anti-interference ability, fast operation speed, high intelligence, and a powerful functional system, which can meet the needs of users. The output and input of the system are completely electrically isolated, the insulation performance of the entire power distribution system is good, and the fully isolated booster circuit is safer and more reliable. The inverter has six protection functions: over-temperature protection, under-voltage alarm, under-voltage protection, over-voltage protection, short circuit protection, overload protection, etc. Besides, the IP65 waterproof design can prevent rain from eroding its surface, so you can use it with confidence. After the installation of the power station, you don’t need to do maintenance work. After a long period of use, you only need to remove the dust from the photovoltaic panel. With a size of 8.392.289.84inch, the inverter adopts high-frequency telephone, micro processing, and other technologies, so it is smaller, lighter, and won’t occupy too much space. During installation, you can stack multiple inverters at will, form a single-phase parallel stacking system, or conveniently form a three-phase system to provide a three-phase AC. We have been working hard to provide better service and quality for our customers, which is our goal. If there is any quality problem with our inverters. The inverter is equipped with two gaskets to help you install the photovoltaic support, making the inverter more stable. The inverter is provided with heat dissipation holes, which can play a good role in heat dissipation and prolong the service life of the inverter. This product is applicable to 30V or 36V solar panels, 36V batteries. The inverter can be widely used in residential or commercial areas for turning the direct current generated by solar panels into alternating current. Step 1: Install the inverter on the support of the photovoltaic panel with the screws provided by the machine. Step 2: Connect the positive and negative poles of the DC connection plug on the photovoltaic panel to the DC input terminal of the inverter. Step 3: Open the waterproof cover of the AC output interface of the inverter and connect the AC cable to the AC waterproof plug. Step 4: Connect the AC output cable to the AC main cable. Step 5: Repeat steps 1 to 3 to install and connect all inverters. Step 6: Connect the AC main cable to the public grid and start your green energy journey. Plug Type: US Standard. Maximum Input DC Voltage: 54V. Peak Power Tracking Voltage: 22-45V. Operating Voltage Range: 17-50V. Min/Max Start-up Voltage: 22-50V. Maximum DC Short Circuit Current: 40A. Maximum Input Operating Current: 30A. Output Peak Power: 700watt. Rated Output Power: 650watt. Rated Output Current: 6.36A. Rated Voltage Range: 80-160VAC. Rated Frequency Range: 57-62.5Hz. Number of Circuit Connections Per String: 6. Static MPPT Efficiency: 99.5%. Maximum Output Efficiency: 91.2%. Night Time Power Loss. Communication Mode: Power Line Carrier. Power Transmission Mode: Reverse Transmission, Load Priority. Gross Weight: 2.48kg/5.47lbs. Net Weight: 1.63kg/3.59lbs. Product Size: 21.35.825cm/8.392.289.84inch. Package Size: 342411.5cm/13.399.454.53inch. 1 Solar Grid Tie Micro Inverter. Other Accessories for Installation. Please install the inverter correctly according to the instructions. If you have any questions, please contact the relevant personnel. Please don’t dismantle the machine. Only qualified maintenance personnel can repair the inverter. Please install the inverter in a place with low humidity and good ventilation to avoid overheating the inverter and remove the surrounding inflammable and explosives. When using this inverter, please take good care of your children to prevent them from touching and playing to avoid electric shock. Please note that our products are grid-connected, the AC output port has to be connected to the home grid in order to achieve grid-connected power generation. When the input load is with solar panels, it is important that the VOC voltage is between 30-48V. We recommend that the solar panel is configured for 20% more power than the power of the product. For example, if the product is 600W, the total power of the solar panels should be between 700-750W. When the input load is a battery, we recommend a battery voltage of 36V, which can be connected in series with 3 12V batteries. Please note that the positive and negative polarity should not be reversed when connecting the product. The recommended battery current is 36V/10mah for 300W, 36V/20mah for 600W, and 36V/40-45mah for 1200W. The input and output voltage of the configuration is within the normal operating voltage range of the product in order for the product to work properly and achieve grid-connected power generation. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement. Please make sure you do not mind before you order. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. Applicable to 30V or 36V solar panels, 36V batteries. LCD Display, Digital Control, Electrical Isolation, Safety Guard, Flexible Installation Mode, Small Footprint. Maximum Input DC Voltage. Peak Power Tracking Voltage. Maximum DC Short Circuit Current. Maximum Input Operating Current. Number of Circuit Connections Per String. Reverse Transmission, Load Priority. 21.35.825cm/8.392.289.84inch. Solar Grid Tie Micro Inverter. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “automaimaimai” and is located in this country: US. This item can be shipped to United States.

Application: Applicable to 30V or 36V solar panels, 36V batteries
Current Output: /
Current Type: /
System Configuration: /
Current Rating: /
Features: LCD Display, Digital Control, Electrical Isolation, Safety Guard, Flexible Installation Mode, Small Footprint:
Charging Mode: /
Resistance Properties: /
Model: WVC-700W
Color: Silver
Material: Aluminium Alloy
Power: 700W
Voltage: 110V
Plug Type: US Standard
Maximum Input DC Voltage: 54V
Peak Power Tracking Voltage: 22-45V
Operating Voltage Range: 17-50V
Min/Max Start-up Voltage: 22-50V
Maximum DC Short Circuit Current: 40A
Maximum Input Operating Current: 30A
Output Peak Power: 700watt
Rated Output Power: 650watt
Rated Output Current: 6.36A
Rated Voltage Range: 80-160VAC
Rated Frequency Range: 57-62.5Hz
Power Factor: ＞99%
Number of Circuit Connections Per String: 6
Static MPPT Efficiency: 99.5%
Maximum Output Efficiency: 91.2%
Night Time Power Loss: <1W
Total Flow Distortion: <5%
Operating Temperature Range: ﹣40℃~60℃/﹣40℉~140℉
Waterproof Rating: IP65
Cooling Method: Self-cooling
Communication Mode: Power Line Carrier
Power Transmission Mode: Reverse Transmission, Load Priority
Product Size: 21.3*5.8*25cm/8.39*2.28*9.84inch
Brand: Unbranded
Type: Solar Grid Tie Micro Inverter

Category: 700w | Comments Off

May 2023
M	T	W	T	F	S	S
« Apr				Jun »
1	2	3	4	5	6	7
8	9	10	11	12	13	14
15	16	17	18	19	20	21
22	23	24	25	26	27	28
29	30	31