1000W MPPT Grid Tie Inverter 110V For 36V Solar Panel Pure Sine Wave Inverter US

Description This grid tie inverter can effectively convert sunlight into clean green energy. It uses imported industrial electronic components, innovative MPPT technology and an isolated high-frequency transformer to make the efficiency higher than 99%, which is a more responsive, and higher output efficiency in photovoltaic power generation application systems. Its powerful output can effectively generate electricity for you. Key Features High-quality Material: The grid tie inverter is made of aluminum alloy, which is rust-free, heat-resistant, cold-resistant and anti-corrosion. It also uses imported industrial electronic components, which you can use for a long time. Environmental-friendly Choice: This grid tie inverter converts the direct current generated by the solar panel into alte. 1000W MPPT Grid Tie Inverter 110V For 36V Solar Panel Pure Sine Wave Inverter US. 1000W Solar Grid Tie Inverter DC22-50V to AC90V/140V Pure Sine Wave Inverter. This grid tie inverter can effectively convert sunlight into clean green energy. High-quality Material: The grid tie inverter is made of aluminum alloy, which is rust-free, heat-resistant, cold-resistant and anti-corrosion. Environmental-friendly Choice: This grid tie inverter converts the direct current generated by the solar panel into alternating current, providing an environment-friendly and pollution-free continuous energy source. High Efficiency: The product adopts a unique circuit design, imported industrial electronic components, isolated high-frequency transformer, and unique MPPT technology, with efficiency greater than 99%, so it can achieve sensitive response and more stable maximum power point locking. Pure Sine Wave: The grid tie inverter provides the same clean and pure sine wave output as the power supply. It can better protect sensitive devices, provide stronger driving ability, and lower power consumption. Electrical Isolation: The complete electrical isolation of machine output and input makes the entire power distribution system well-insulated, and the use of a fully isolated step-up circuit makes its use safer and more reliable. Safe and Secure: This product has a great electrical protection function. And the sturdy aluminum alloy shell can better prevent rainwater from eroding the surface, dropping and collision, so you can use it with confidence. Flexible Installation: The grid tie inverter adopts the modular design of parallel components, so you can conduct distributed installation according to your specific needs. Excellent Cooling Capacity: It is equipped with a high-speed intelligent cooling fan. When the temperature exceeds 45? /113°F, it will automatically start to work to prevent the inverter from overheating. Small Floor Space: The size of this grid tie inverter is only 10.66.52.1inch, which does not occupy much space and can even be installed in small stores. High Security: This grid tie inverter has passed the professional CE and RoHS certifications. In addition, it also has some core technology patents for electronic circuit design, appearance design and so on. Therefore, it is a trustworthy product. Simple Structure: Its structure is simple. Therefore, you only need to clean the dust on the grid tie inverter without disassembly and reassembly. Gaskets: The inverter is equipped with two gaskets to help you install the photovoltaic support, making the inverter more stable. Heat Dissipation Holes: The body has multiple heat dissipation holes, which help the machine to dissipate heat and enable it to run smoothly. It is very suitable for grid-connected power generation in schools, power stations and households. It is applicable to 36V solar panel and 36V battery. AC Output Power:1000W. Maximum AC Output Power:1050W. AC Output Voltage: 110V(AC 90V-140V)170-260V. Frequency Range: 48- 62Hz(Self-adaption). Scope of Application: 36V Solar Panel and 36V Battery. Package Size: 352010cm/13.87.93.9in. Product Size: 2116.55.3cm/10.66.52.1in. Gross Weight: 4kg/8.8lbs. Net Weight: 3.5kg/7.7lbs. 1 Set English Manual. All Accessories for Assembly. Please note that the input and output voltage must be within the voltage range of the product. Please note that the output port of the inverter must be connected to the household power grid socket (civil single-phase power grid) through an AC power line so that the product can work normally! Please note that the PV input power is recommended to be greater than 20% of the rated power of the product. Please note that the Vmp of the solar panel must be within the MPPT range to ensure the best MPPT maximum power output. We recommend using 36V photovoltaic panels (VOC voltage between 26-50V) or 36V batteries as input power to obtain better output power. Please note that the DC terminal must be tightened, otherwise, the product may be damaged. Please note that the grid tie inverter cannot be used as off grid/stand alone solar system. The output needs to be connected to the grid power. And it can not supply power directly to the AC loads. Please read the operating manual completely before use. And pay particular attention to the safety instructions included. Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. Corrosion Resistant, All Daylight Conditions. Home/Garden, Agriculture/Farming, Commercial, Irrigation. MPPT (Maximum Power Point Tracking). Abrasion Resistant, Chemical Resistant, Corrosion Resistant. Maximum AC Output Power. 110V(AC 90V-140V)170-260V. 36V Solar Panel and 36V Battery. 2116.55.3cm/10.66.52.1in.

Category: 1000w | Comments Off

October 31

MPPT Grid Tie Smart Solar Micro Inverter 1400W Grid Tie & DC to AC 110V

Cs-head{overflow:hidden;position:relative}. Title{margin:0;font-weight:400;font-size:14px;padding:5px 10px}. Dc-dock:hover{width:117px;background-position:bottom right}. Dc-cs{clear:both;max-width:100vw}. Dock-rb{right:0;bottom:0}. Title{font-weight: 700;font-size: 24px}. Title:after{content:’Hot Sale';color: #FFFFFF}. Cs-list>li:nth-child(n+7){display:none}. Title{margin:0;font-weight: 700;font-size: 24px}. Title:after{content:’You may like';color: #FFFFFF}. Coupon{transform-origin:right top;right:0}. Cs-list{margin:0 0 0 -20px;padding:0;background:#FFF}. Cs-list:before{display:table;line-height:0;content:}. Cs-list:after{clear:both}. Cs-list>li{float:left;width:16.66%;list-style:none;box-sizing:border-box;padding:10px 0 10px 20px;position:relative;margin:0}. Cs-list-col6>li{width:16.66%}. Cs-list-col7>li{width:14.28%;padding-left:18px}. Cs-list-col8>li{width:12.5%;padding-left:16px}. Cs-list-col9>li{width:11.11%;padding-left:15px}. Cs-list-col10>li{width:10%;padding-left:14px}. Cs-list-col11>li{width:9.09%;padding-left:12px}. Cs-list-col12>li{width:8.33%;padding-left:10px}. Cs-list>liwidth:33.33%! Cover:after{display:block;content:”;padding-top:100%;background-repeat:no-repeat;background-size:cover;background-position:center}. Cs-list a{text-decoration:none}. Title{color:#333;margin:5px 0}. Title:after{display:block;display:-webkit-box;-webkit-line-clamp:2;-webkit-box-orient:vertical;font-size:14px;line-height:1.4em;height:2.8em;overflow:hidden;white-space:normal;word-break:break-word;-webkit-hyphens:auto;-ms-hyphens:auto;hyphens:auto}. Plus{height:20px;overflow:hidden}. Price:after{content:”;font-size:14px}. Origin{margin-left:3px;font-size:12px;color:#AAA}. Origin:after{display:none;content:”;text-decoration:line-through}. Coupon{display:none;width:60px;height:60px;border-radius:50%;background:rgba(224,13,12.8);color:#FFF;position:absolute;top:10px;right:10px;text-align:center;padding-top:12px;box-sizing:border-box}. Coupon:before{content:”;font-size:20px}. Coupon:after{content:’Off';font-size:12px;position:absolute;bottom:8px;right:12px}. Title{min-height:12px}p:empty+hr{display:none}hr+span. Dc_tracker_img{display:none}#ds_div>. Dc_tracker_img:last-of-type{display:block} [data-lid=”157394887731″]. Title:aftercontent:’10\\.

Category: mppt | Comments Off

October 30

Should You Use A Microinverter Real Test

Category: should | Comments Off

October 30

700W, Solar Grid Tie Micro Inverter Fit Solar Panel Waterproof Grid Tie Inverter

700W, Solar Grid Tie Micro Inverter Fit Solar Panel Waterproof Grid Tie Inverter. An inverter can efficiently turn the direct current generated by solar panels into the alternating current used by household appliances. This micro inverter makes it easier. Made of fine aluminum alloy, this IP65 waterproof inverter has a wide range of functions, good safety, convenient installation, and high-cost performance. We believe this inverter will not disappoint you. The inverter is made of aluminum alloy, which is durable, corrosion-resistant, and not easy to rust. You can use it for a long time without frequent replacement, and your cost can be saved. The inverter has built-in high-precision maximum power point tracking, which can optimize the power collection from the solar panel, accurately capture and lock the maximum output power point, and greatly increase power generation to more than 25%. In addition, the efficient power reverse transmission technology can transmit the power that can not be used up to the grid in the reverse direction to other places for use, and the power transmission rate can reach 99.9%. The inverter is equipped with an LCD display screen to monitor voltage, power, frequency, current, etc. So you can see the machine clearly in operation. The inverter adopts intelligent soft switching technology, high-frequency switching power supply technology, and 32-bit DSP full digital SPWM control technology, making the product strong anti-interference ability, fast operation speed, high intelligence, and a powerful functional system, which can meet the needs of users. The output and input of the system are completely electrically isolated, the insulation performance of the entire power distribution system is good, and the fully isolated booster circuit is safer and more reliable. The inverter has six protection functions: over-temperature protection, under-voltage alarm, under-voltage protection, over-voltage protection, short circuit protection, overload protection, etc. Besides, the IP65 waterproof design can prevent rain from eroding its surface, so you can use it with confidence. After the installation of the power station, you don’t need to do maintenance work. After a long period of use, you only need to remove the dust from the photovoltaic panel. With a size of 8.392.289.84inch, the inverter adopts high-frequency telephone, micro processing, and other technologies, so it is smaller, lighter, and won’t occupy too much space. During installation, you can stack multiple inverters at will, form a single-phase parallel stacking system, or conveniently form a three-phase system to provide a three-phase AC. We have been working hard to provide better service and quality for our customers, which is our goal. If there is any quality problem with our inverters. The inverter is equipped with two gaskets to help you install the photovoltaic support, making the inverter more stable. The inverter is provided with heat dissipation holes, which can play a good role in heat dissipation and prolong the service life of the inverter. This product is applicable to 30V or 36V solar panels, 36V batteries. The inverter can be widely used in residential or commercial areas for turning the direct current generated by solar panels into alternating current. Step 1: Install the inverter on the support of the photovoltaic panel with the screws provided by the machine. Step 2: Connect the positive and negative poles of the DC connection plug on the photovoltaic panel to the DC input terminal of the inverter. Step 3: Open the waterproof cover of the AC output interface of the inverter and connect the AC cable to the AC waterproof plug. Step 4: Connect the AC output cable to the AC main cable. Step 5: Repeat steps 1 to 3 to install and connect all inverters. Step 6: Connect the AC main cable to the public grid and start your green energy journey. Plug Type: US Standard. Maximum Input DC Voltage: 54V. Peak Power Tracking Voltage: 22-45V. Operating Voltage Range: 17-50V. Min/Max Start-up Voltage: 22-50V. Maximum DC Short Circuit Current: 40A. Maximum Input Operating Current: 30A. Output Peak Power: 700watt. Rated Output Power: 650watt. Rated Output Current: 6.36A. Rated Voltage Range: 80-160VAC. Rated Frequency Range: 57-62.5Hz. Number of Circuit Connections Per String: 6. Static MPPT Efficiency: 99.5%. Maximum Output Efficiency: 91.2%. Night Time Power Loss. Operating Temperature Range:? 40? 60? /? 40? 140? Communication Mode: Power Line Carrier. Power Transmission Mode: Reverse Transmission, Load Priority. Gross Weight: 2.48kg/5.47lbs. Net Weight: 1.63kg/3.59lbs. Product Size: 21.35.825cm/8.392.289.84inch. Package Size: 342411.5cm/13.399.454.53inch. 1 Solar Grid Tie Micro Inverter. Other Accessories for Installation. Please install the inverter correctly according to the instructions. If you have any questions, please contact the relevant personnel. Please don’t dismantle the machine. Only qualified maintenance personnel can repair the inverter. Please install the inverter in a place with low humidity and good ventilation to avoid overheating the inverter and remove the surrounding inflammable and explosives. When using this inverter, please take good care of your children to prevent them from touching and playing to avoid electric shock. Please note that our products are grid-connected, the AC output port has to be connected to the home grid in order to achieve grid-connected power generation. When the input load is with solar panels, it is important that the VOC voltage is between 30-48V. We recommend that the solar panel is configured for 20% more power than the power of the product. For example, if the product is 600W, the total power of the solar panels should be between 700-750W. When the input load is a battery, we recommend a battery voltage of 36V, which can be connected in series with 3 12V batteries. Please note that the positive and negative polarity should not be reversed when connecting the product. The recommended battery current is 36V/10mah for 300W, 36V/20mah for 600W, and 36V/40-45mah for 1200W. The input and output voltage of the configuration is within the normal operating voltage range of the product in order for the product to work properly and achieve grid-connected power generation. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement. Please make sure you do not mind before you order. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday.

Category: 700w | Comments Off

October 29

ABB TRIO-27.6-TL-OUTD-S-US-480-A 27.6kW Inverter

The ABB TRIO-27.6-TL-OUTD-S-US-480-A is a robust 27.6kW inverter designed for advanced solar power systems. With its grid-tie configuration, it’s optimized for seamless integration with your existing electrical setup, ensuring efficient and reliable power conversion. Featuring both AC and DC current capabilities, it’s ideal for a wide range of solar installation scenarios. This charger/inverter model boasts an intuitive LCD display and LED indicator, providing real-time system status and easy-to-understand notifications. Additionally, it’s built with quality assurance from the reputable brand ABB, ensuring longevity and performance. Whether for residential or commercial use, this inverter is a smart choice for managing your solar power effectively.

Category: trio-276-tl-outd-s-us-480-a | Comments Off

October 29

1000W MPPT Grid Tie Inverter, DC10.8-32V to AC90-140V, Pure Sine Wave

Description This grid tie inverter can effectively convert sunlight into clean green energy. It uses imported industrial electronic components, innovative MPPT technology and an isolated high-frequency transformer to make the efficiency higher than 99%, which is a more responsive, and higher output efficiency in photovoltaic power generation application systems. Its powerful output can effectively generate electricity for you. Key Features High-quality Material: The grid tie inverter is made of aluminum alloy, which is rust-free, heat-resistant, cold-resistant and anti-corrosion. It also uses imported industrial electronic components, which you can use for a long time. Environmental-friendly Choice: This grid tie inverter converts the direct current generated by the solar panel into alte. 1000W Solar Micro Inverter Grid Tie MPPT Pure Sine Wave DC to AC 110V. 1000W MPPT Grid Tie Inverter DC10.8-32V to AC90-140V Pure Sine Wave Inverter. Unlock the power of sunlight with the 1000W MPPT Grid Tie Inverter! This efficient inverter transforms direct current from your solar panels into clean, usable alternating current for your home or business. ? Experience the difference of high-efficiency energy generation while contributing to a greener planet! High-quality Materials: Crafted from durable aluminum alloy, this inverter is rust-free, heat-resistant, and designed to withstand harsh conditions. Environmentally Friendly: Converts solar energy into clean electricity, giving you a sustainable energy source without pollution. Outstanding Efficiency: Utilizes advanced MPPT technology with efficiency greater than 99%, ensuring a stable and responsive power generation. Pure Sine Wave Output: Provides excellent wave quality to protect sensitive devices and optimize power usage. Safe and Secure Operation: Featuring robust electrical protection and a sturdy shell that withstands even the harshest weather. Flexible Installation: Modular design allows for customized installations based on your specific energy needs. This grid tie inverter combines cutting-edge technology and user-friendly design, making it ideal for various applications, including homes, schools, and power stations. With a compact size of 10.6×6.5×2.1 inches, it fits perfectly even in small spaces! Equipped with an intelligent cooling fan, it automatically activates when the temperature exceeds 45? (113°F), preventing overheating and ensuring optimal performance. The inverter also comes with two gaskets for secure installation on photovoltaic supports and multiple heat dissipation holes for efficient cooling. AC Output Power: 1000W. Maximum AC Output Power: 1050W. AC Output Voltage: 90-140V. DC Input Voltage: 10.8-32V. Frequency Range: 48-62Hz (Self-adapting). MPPT Range: 15.5-22V. Scope of Application: 18V Solar Panel and 24V Battery. Package Size: 35×20×10 cm (13.8×7.9×3.9 in). Product Size: 21×16.5×5.3 cm (10.6×6.5×2.1 in). Gross Weight: 4 kg (8.8 lbs). Net Weight: 3.5 kg (7.7 lbs). What’s in the Box. 1 × Grid Tie Inverter. 1 Set × English Manual. 1 × Power Cord. All Accessories for Assembly. Ensure the input and output voltage stays within the specified ranges for optimal function. Connect the inverter’s output port to the household power grid through an AC power line for normal operation. For best results, use 18V solar panels (with VOC voltage between 20-30V) or 24V batteries as input power. Keep the inverter clean and dust-free. Inspect connections regularly to ensure the DC aerial is tightened to prevent damage. Transform your energy consumption and invest in clean power today! Embrace the future of energy with our 1000W MPPT Grid Tie Inverter! Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. 2116.55.3cm/10.66.52.1in. Home/Garden, Agriculture/Farming, Commercial, Irrigation. Abrasion Resistant, Chemical Resistant, Corrosion Resistant. MPPT (Maximum Power Point Tracking). Maximum AC Output Power. 110V(AC 90V-140V)(AC170-260V). 18V Solar Panel and 24V Battery.

Category: 1000w | Comments Off

October 28

700W, Solar Grid Tie Micro Inverter Fit Solar Panel Waterproof Grid Tie Inverter

An inverter can efficiently turn the direct current generated by solar panels into the alternating current used by household appliances. This micro inverter makes it easier. Made of fine aluminum alloy, this IP65 waterproof inverter has a wide range of functions, good safety, convenient installation, and high-cost performance. We believe this inverter will not disappoint you. The inverter is equipped with two gaskets to help you install the photovoltaic support, making the inverter more stable. The inverter is provided with heat dissipation holes, which can play a good role in heat dissipation and prolong the service life of the inverter. This product is applicable to 30V or 36V solar panels, 36V batteries. The inverter can be widely used in residential or commercial areas for turning the direct current generated by solar panels into alternating current. Step 1: Install the inverter on the support of the photovoltaic panel with the screws provided by the machine. Step 2: Connect the positive and negative poles of the DC connection plug on the photovoltaic panel to the DC input terminal of the inverter. Step 3: Open the waterproof cover of the AC output interface of the inverter and connect the AC cable to the AC waterproof plug. Step 4: Connect the AC output cable to the AC main cable. Step 5: Repeat steps 1 to 3 to install and connect all inverters. Step 6: Connect the AC main cable to the public grid and start your green energy journey. Plug Type: US Standard. Maximum Input DC Voltage: 54V. Peak Power Tracking Voltage: 22-45V. Operating Voltage Range: 17-50V. Min/Max Start-up Voltage: 22-50V. Maximum DC Short Circuit Current: 40A. Maximum Input Operating Current: 30A. Output Peak Power: 700watt. Rated Output Power: 650watt. Rated Output Current: 6.36A. Rated Voltage Range: 80-160VAC. Rated Frequency Range: 57-62.5Hz. Number of Circuit Connections Per String: 6. Static MPPT Efficiency: 99.5%. Maximum Output Efficiency: 91.2%. Night Time Power Loss. Operating Temperature Range:? 40? 60? /? 40? 140? Communication Mode: Power Line Carrier. Power Transmission Mode: Reverse Transmission, Load Priority. Gross Weight: 2.48kg/5.47lbs. Net Weight: 1.63kg/3.59lbs. Product Size: 21.35.825cm/8.392.289.84inch. Package Size: 342411.5cm/13.399.454.53inch. 1 Solar Grid Tie Micro Inverter. Other Accessories for Installation. Please install the inverter correctly according to the instructions. If you have any questions, please contact the relevant personnel. Please don’t dismantle the machine. Only qualified maintenance personnel can repair the inverter. Please install the inverter in a place with low humidity and good ventilation to avoid overheating the inverter and remove the surrounding inflammable and explosives. When using this inverter, please take good care of your children to prevent them from touching and playing to avoid electric shock. Please note that our products are grid-connected, the AC output port has to be connected to the home grid in order to achieve grid-connected power generation. When the input load is with solar panels, it is important that the VOC voltage is between 30-48V. We recommend that the solar panel is configured for 20% more power than the power of the product. For example, if the product is 600W, the total power of the solar panels should be between 700-750W. When the input load is a battery, we recommend a battery voltage of 36V, which can be connected in series with 3 12V batteries. Please note that the positive and negative polarity should not be reversed when connecting the product. The recommended battery current is 36V/10mah for 300W, 36V/20mah for 600W, and 36V/40-45mah for 1200W. The input and output voltage of the configuration is within the normal operating voltage range of the product in order for the product to work properly and achieve grid-connected power generation. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement. Please make sure you do not mind before you order. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday.

Category: 700w | Comments Off

October 28

MPPT Grid Tie Smart Solar Micro Inverter 1400W Grid Tie & DC to AC 110V

Specification Model: WVC-1400W Color: Silver Material: Aluminium Alloy Power: 1400W Voltage: 110V Plug Type: US Standard Maximum Input DC Voltage: 54V Peak Power Tracking Voltage: 22-45V Operating Voltage Range: 17-50V Min/Max Start-up Voltage: 22-50V Maximum DC Short Circuit Current: 80A Maximum Input Operating Current: 58A Output Peak Power: 1400watt Rated Output Power: 1350watt Rated Output Current: 12.8A Rated Voltage Range: 80-160VAC Rated Frequency Range: 57-62.5Hz Power Factor: >99% Number of Circuit Connections Per String: 3 Static MPPT Efficiency: 99.5% Maximum Output Efficiency: 91.2% Night Time Power Loss. MPPT Grid Tie Smart Solar Micro Inverter 1400W Grid Tie & DC to AC 110V. Plug Type: US Standard. Maximum Input DC Voltage: 54V. Peak Power Tracking Voltage: 22-45V. Operating Voltage Range: 17-50V. Min/Max Start-up Voltage: 22-50V. Maximum DC Short Circuit Current: 80A. Maximum Input Operating Current: 58A. Output Peak Power: 1400watt. Rated Output Power: 1350watt. Rated Output Current: 12.8A. Rated Voltage Range: 80-160VAC. Rated Frequency Range: 57-62.5Hz. Number of Circuit Connections Per String: 3. Static MPPT Efficiency: 99.5%. Maximum Output Efficiency: 91.2%. Night Time Power Loss. Operating Temperature Range:? 40? 60? /? 40? 140? Communication Mode: Power Line Carrier. Power Transmission Mode: Reverse Transmission, Load Priority. Gross Weight: 4.2kg/9.26lbs. Net Weight: 3kg/6.61lbs. Product Size: 2137.44cm/8.2714.721.57inch. Package Size: 483512cm/18.913.784.72inch. An inverter can efficiently turn the direct current generated by solar panels into the alternating current used by household appliances. This microinverter makes it easier. Made of fine aluminum alloy, this I. S a wide range of functions, good safety, convenient installation, and high-cost performance. We believe this inverter will not disappoint you. Premium Material: The inverter is made of aluminum alloy, which is durable, corrosion-resistant, and not easy to rust. You can use it for a long time without frequent replacement, and your cost can be saved. High Efficiency: The product adopts a unique circuit design, imported industrial electronic components, isolated high-frequency transformer, and unique MPPT technology, with efficiency greater than 99%, so it can achieve sensitive response and more stable maximum power point locking. Digital Control: The inverter adopts intelligent soft switching technology, high-frequency switching power supply technology, and 32-bit DSP full digital SPWM control technology, making the product strong anti-interference ability, fast operation speed, high intelligence, and a powerful functional system, which can meet the needs of users. Electrical Isolation: The output and input of the system are completely electrically isolated, the insulation performance of the entire power distribution system is good, and the fully isolated booster circuit is safer and more reliable. Good Heat Dissipation Effect: The product adopts a self-cooling system and is designed with heat dissipation holes, which can timely reduce the temperature during operation, reduce potential safety hazards and extend the applicable life of the product. Safety Guard: The inverter has six protection functions: over-temperature protection, under-voltage alarm, under-voltage protection, over-voltage protection, short circuit protection, overload protection, etc. Besides, the IP65 waterproof design can prevent rain from eroding its surface, so you can use it with confidence. Easy Maintenance: After the installation of the power station, you don’t need to do maintenance work. After a long period of use, you only need to remove the dust from the photovoltaic panel. Small Footprint: With a size of. 8.271.5714.72inch. The inverter adopts high-frequency telephone, micro processing, and other technologies, so it is smaller, lighter, and won’t occupy too much space. Flexible Installation Mode: During installation, you can stack multiple inverters at will, form a single-phase parallel stacking system, or conveniently form a three-phase system to provide a three-phase AC. At the same time, we also provide a detailed manual and various accessories. You just need to follow the steps to install them. Gasket: The inverter is equipped with two gaskets to help you install the photovoltaic support, making the inverter more stable. Round Corners : The corners of this product are very round, which can effectively reduce your skin scratches during installation or movement. LED Indicator: The product uses an LED indicator, which mainly has two colors: red light and green light. You can master the product situation in time according to the color and flicker of the light, which is very convenient. This product is applicable to 30V or 36V solar panels, or 36V batteries. The inverter can be widely used in residential or commercial areas, power stations, and schools for turning the direct current generated by solar panels into alternating current. Step 1: Install the inverter on the support of the photovoltaic panel with the screws provided by the machine. Step 2: Connect the positive and negative poles of the DC connection plug on the photovoltaic panel to the DC input verdana of the inverter. Step 3: Open the waterproof cover of the AC output interface of the inverter and connect the AC cable to the AC waterproof plug. Step 4: Connect the AC output cable to the AC main cable. Step 5: Repeat steps 1 to 3 to install and connect all inverters. Step 6: Connect the AC main cable to the public grid and start your green energy journey. 1 Solar Grid Tie Micro Inverter. Other Accessories for Installation. Please install the inverter correctly according to the instructions. If you have any questions, please contact the relevant personnel. Please don’t dismantle the machine. Only qualified maintenance personnel can repair the inverter. Please install the inverter in a place with low humidity and good ventilation to avoid overheating the inverter and remove the surrounding inflammable and explosives. When using this inverter, please take good care of your children to prevent them from touching and playing to avoid electric shock. Please note that connected solar panels, batteries, or wind generators DC input DC power supply cable. Please note that this inverter does not have a monitoring function. Please note that our products are grid-connected, the AC output port has to be connected to the home grid in order to achieve grid-connected power generation. When the input load is with solar panels, it is important that the VOC voltage is between 30-48V. We recommend that the solar panel is configured for 20% more power than the power of the product. For example, if the product is 600W, the total power of the solar panels should be between 700-750W. When the input load is a battery, we recommend a battery voltage of 36V, which can be connected in series with 3 12V batteries. Please note that the positive and negative polarity should not be reversed when connecting the product. The recommended battery current is 36V/10mah for 300W, 36V/20mah for 600W, and 36V/40-45mah for 1200W. The input and output voltage of the configuration is within the normal operating voltage range of the product in order for the product to work properly and achieve grid-connected power generation. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement. Please make sure you do not mind before you order. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. Durable MaterialBeautiful AppearanceStorng Stability. Premium Material? Long Service Life? Creative Design? Reverse Power Transmission, Pure Sine Wave, High-quality Material. Maximum Input DC Voltage. Peak Power Tracking Voltage. Maximum DC Short Circuit Current. Maximum Input Operating Current. Number of Circuit Connections Per String. Reverse Transmission, Load Priority. 2137.44cm/8.2714.721.57inch. 483512cm/18.913.784.72inch.

Category: mppt | Comments Off

October 27

1000W Solar Micro Inverter Grid Tie MPPT Pure Sine Wave DC to AC 110V

Description This grid tie inverter can effectively convert sunlight into clean green energy. It uses imported industrial electronic components, innovative MPPT technology and an isolated high-frequency transformer to make the efficiency higher than 99%, which is a more responsive, and higher output efficiency in photovoltaic power generation application systems. Its powerful output can effectively generate electricity for you. Key Features High-quality Material: The grid tie inverter is made of aluminum alloy, which is rust-free, heat-resistant, cold-resistant and anti-corrosion. It also uses imported industrial electronic components, which you can use for a long time. Environmental-friendly Choice: This grid tie inverter converts the direct current generated by the solar panel into alte. 1000W Solar Micro Inverter Grid Tie MPPT Pure Sine Wave DC to AC 110V. 1000W MPPT Grid Tie Inverter DC10.8-32V to AC90-140V Pure Sine Wave Inverter. This grid tie inverter can effectively convert sunlight into clean green energy. High-quality Material: The grid tie inverter is made of aluminum alloy, which is rust-free, heat-resistant, cold-resistant and anti-corrosion. Environmental-friendly Choice: This grid tie inverter converts the direct current generated by the solar panel into alternating current, providing an environment-friendly and pollution-free continuous energy source. High Efficiency: The product adopts a unique circuit design, imported industrial electronic components, isolated high-frequency transformer, and unique MPPT technology, with efficiency greater than 99%, so it can achieve sensitive response and more stable maximum power point locking. Pure Sine Wave: The grid tie inverter provides the same clean and pure sine wave output as the power supply. It can better protect sensitive devices, provide stronger driving ability, and lower power consumption. Safe and Secure: This product has a great electrical protection function. And the sturdy aluminum alloy shell can better prevent rainwater from eroding the surface, dropping and collision, so you can use it with confidence. Flexible Installation: The grid tie inverter adopts the modular design of parallel components, so you can conduct distributed installation according to your specific needs. Excellent Cooling Capacity: It is equipped with a high-speed intelligent cooling fan. When the temperature exceeds 45? /113°F, it will automatically start to work to prevent the inverter from overheating. Small Floor Space: The size of this grid tie inverter is only 10.66.52.1inch, which does not occupy much space and can even be installed in small stores. High Security: This grid tie inverter has passed the professional CE and RoHS certifications. In addition, it also has some core technology patents for electronic circuit design, appearance design and so on. Therefore, it is a trustworthy product. Simple Structure: Its structure is simple. Therefore, you only need to clean the dust on the grid tie inverter without disassembly and reassembly. Gaskets: The inverter is equipped with two gaskets to help you install the photovoltaic support, making the inverter more stable. Heat Dissipation Holes: The body has multiple heat dissipation holes, which help the machine to dissipate heat and enable it to run smoothly. It is very suitable for grid-connected power generation in schools, power stations and households. It is applicable to 18V solar panel and 24V battery. AC Output Power:1000W. Maximum AC Output Power:1050W. AC Output Voltage: 110V(AC 90V-140V, AC90-140V, 170-260V). DC Input: DC10.8V-32V. Frequency Range: 48- 62Hz(Self-adaption). MPPT Range 15.5-22V. Scope of Application: 18V Solar Panel and 24V Battery. Package Size: 352010cm/13.87.93.9in. Product Size: 2116.55.3cm/10.66.52.1in. Gross Weight: 4kg/8.8lbs. Net Weight: 3.5kg/7.7lbs. 1 Set English Manual. All Accessories for Assembly. Please note that the input and output voltage must be within the voltage range of the product. Please note that the output port of the inverter must be connected to the household power grid socket (civil single-phase power grid) through an AC power line so that the product can work normally! Please note that the PV input power is recommended to be greater than 20% of the rated power of the product. Please note that the Vmp of the solar panel must be within the MPPT range to ensure the best MPPT maximum power output. We recommend using 18V photovoltaic panels (VOC voltage between 20-30V) or 24V batteries as input power to obtain better output power. Please note that the DC Comic Sans MS must be tightened, otherwise, the product may be damaged. Please note that the grid tie inverter cannot be used as off grid/stand alone solar system. The output needs to be connected to the grid power. And it can not supply power directly to the AC loads. Please read the operating manual completely before use. And pay particular attention to the safety instructions included. Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. Great Durability, Exquisite Appearance, High-quality. Corrosion Resistant, All Daylight Conditions. Home/Garden, Agriculture/Farming, Commercial, Irrigation. MPPT (Maximum Power Point Tracking). Abrasion Resistant, Chemical Resistant, Corrosion Resistant. Maximum AC Output Power. 110V(AC 90V-140V)(AC170-260V). 18V Solar Panel and 24V Battery. 2116.55.3cm/10.66.52.1in.

Category: 1000w | Comments Off

October 27