March 24

MPPT Micro Inverter Wireless Solar Grid Tie Converter Auto Switch WiFi Monitor

MPPT-Micro-Inverter-Wireless-Solar-Grid-Tie-Converter-Auto-Switch-WiFi-Monitor-01-rdz MPPT Micro Inverter Wireless Solar Grid Tie Converter Auto Switch WiFi Monitor
MPPT Micro Inverter Wireless Solar Grid Tie Converter Auto Switch WiFi Monitor
MPPT Micro Inverter Wireless Solar Grid Tie Converter Auto Switch WiFi Monitor
MPPT Micro Inverter Wireless Solar Grid Tie Converter Auto Switch WiFi Monitor
MPPT Micro Inverter Wireless Solar Grid Tie Converter Auto Switch WiFi Monitor
MPPT Micro Inverter Wireless Solar Grid Tie Converter Auto Switch WiFi Monitor
MPPT Micro Inverter Wireless Solar Grid Tie Converter Auto Switch WiFi Monitor
MPPT Micro Inverter Wireless Solar Grid Tie Converter Auto Switch WiFi Monitor
MPPT Micro Inverter Wireless Solar Grid Tie Converter Auto Switch WiFi Monitor
MPPT Micro Inverter Wireless Solar Grid Tie Converter Auto Switch WiFi Monitor
MPPT Micro Inverter Wireless Solar Grid Tie Converter Auto Switch WiFi Monitor
MPPT Micro Inverter Wireless Solar Grid Tie Converter Auto Switch WiFi Monitor

MPPT Micro Inverter Wireless Solar Grid Tie Converter Auto Switch WiFi Monitor
MPPT Micro Inverter Wireless Solar Grid Tie Converter Auto Switch WiFi Monitor. Piece MPPT Waterproof Inverter. Fixing use Screws and Nuts 1 Set. Piece English User Manual. There may be some delays due to flight, holiday, weather, local post, local natural disaster impact. It must also be in the original packaging. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “ginmega” and is located in this country: CN. This item can be shipped worldwide.
  • Color: WVC350-AC Cable
  • Input Voltage: 22-60VDC
  • Output Voltage: 110V230VAC 50HZ60HZ
  • Current Output: Standard
  • AC Output Voltage: 120-230VAC
  • System Configuration: Grid-Tie
  • Power Source: Solar
  • Output Type: Single
  • Size: 165*176*38mm
  • Wattage: 330W
  • Maximum Flow Rate: Standard
  • MPN: 1664423994
  • Item Length: 165mm
  • Wire Gauge: Standard
  • Current Type: AC/DC
  • Voltage: 120-230V
  • Connector Type: Other
  • Is Smart Device: YES
  • Features: Durable
  • Protection Properties: Other
  • Output Frequency: 50HZ60HZ
  • DC Input Voltage: 22-60VDC
  • Output Power: 301 – 400W
  • Maximum Input Power: 400W
  • Rated Output Power: 330Watt
  • Maximum Input Voltage: Standard
  • Inverter Technology: Hybrid
  • Current Rating: Standard
  • Material: Carbon Fiber
  • Brand: Unbranded
  • Recmmend Use Panels: 1*435Watt
  • Type: Charger/Inverter
  • Connector Configuration: Other
  • Model: 1664423959
  • Recommended Environment: Indoor/Outdoor
  • Country/Region of Manufacture: China
  • Charging Mode: MPPT (Maximum Power Point Tracking)
  • Resistance Properties: Dust Resistant
  • Application: Home/Garden
  • Power: 330W
  • Product Line: Inverter

MPPT Micro Inverter Wireless Solar Grid Tie Converter Auto Switch WiFi Monitor
Category: mppt | Comments Off
December 11

MPPT Grid Tie Micro Inverter IP67 WIFI 600-800W For 20-60VDC Panel 80-260VAC

MPPT-Grid-Tie-Micro-Inverter-IP67-WIFI-600-800W-For-20-60VDC-Panel-80-260VAC-01-ni MPPT Grid Tie Micro Inverter IP67 WIFI 600-800W For 20-60VDC Panel 80-260VAC

MPPT Grid Tie Micro Inverter IP67 WIFI 600-800W For 20-60VDC Panel 80-260VAC
MPPT Grid Tie Micro Inverter IP67 WIFI 600-800W For 20-60VDC Panel 80-260VAC. When the inverter converts direct current into alternating current. It will generate heat. This heat is added to the ambient temperature of the inverter housing, and the inverter conducts heat through fans and/or radiators. The heat rises above the specific level that the material in the inverter begins to affect. The insulation will become fragile, the solder will expand and crack, and the metal parts in the capacitor will fatigue. The upgraded 600W/700W/800W/1400W/1500W miniature inverter is made of aluminum alloy shell, which can dissipate heat on all sides and achieve the best heat dissipation effect. The drive is also designed to allow the panel to be exposed to as much air as possible for physical cooling by rapid airflow. MPPT voltage range: 22V-60V. Operating voltage range: 22V-60V. Maximum input voltage: 60V. Maximum input power: 600W/700W/800W. Maximum output power: 600W/700W/800W. Rated output voltage: 120VAC/230VAC. Communication: WiFi with cloud monitoring. This inverter has a new smart WiFi module, no need to order a data box, directly download the APP software, scan the code to log in, and easily use the WiFi module to check the power generation data. Recommended Input Power(STC). Max units per branch. Auto switch 50/60Hz(45%55/5565Hz). AC Cable withstand max current. Compatible with 6072 cell PV modules. High frequency transformer isolation. Reverse transfer, load priority. Islanding, Over-temperature, Over / low AC & AC voltage. 2.4G wireless(Inverter to DataBox). EN50549-1, VDE0126-1-1, VDE4105, ABNT NBR16149, ABNT NBR16150, ABNT NBR62116, RD1699, UNE206006 IN, UNE206007-1 IN, IEEE1547. UL1741, IEC62109-1/-2, IEC61000-6-3, IEC61000-6-3, IEC61000-3-2, IEC61000-3-3. There may be some delays due to flight, holiday, weather, local post, local natural disaster impact. It must also be in the original packaging. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “audosta” and is located in this country: CN. This item can be shipped worldwide.
  • Color: 700W
  • Input Voltage: 20-60V
  • Output Voltage: 80-260V
  • Features: Durable
  • Custom Bundle: No
  • MPN: 6684610418
  • Max Input Voltage: 60V DC
  • Recommended Input Power: 210~300W(2 PCS)
  • Voltage: 20-60V
  • Max output: 0.95
  • Power factor: 99%
  • Dimensions: 30X25X8CM
  • Power Source: Solar
  • Size: 30X25X8CM
  • Country/Region of Manufacture: China
  • Static MPPT: 0.999
  • Ambient temperature: – 40℃ to +65℃
  • Model: 6684610394
  • Operating Voltage: 20-60VDC
  • MPPT Voltage: 25-55VDC
  • Charging Mode: MPPT (Maximum Power Point Tracking)
  • Application: Electronics
  • Current Rating: Standard
  • Current Type: AC/DC
  • Current Output: Standard
  • Power: 600-800W
  • System Configuration: Grid-Tie
  • Resistance Properties: Dustproof
  • Brand: Unbranded
  • Max Input Current: 2*13A
  • Is Smart Device: YES
  • Type: Charger/Inverter

MPPT Grid Tie Micro Inverter IP67 WIFI 600-800W For 20-60VDC Panel 80-260VAC
Category: mppt | Comments Off
November 19

MPPT Solar Power Grid Tie Inverter Discharge WIFI DC22-90V AC95-265V 1000W 48V

MPPT-Solar-Power-Grid-Tie-Inverter-Discharge-WIFI-DC22-90V-AC95-265V-1000W-48V-01-kq MPPT Solar Power Grid Tie Inverter Discharge WIFI DC22-90V AC95-265V 1000W 48V
MPPT Solar Power Grid Tie Inverter Discharge WIFI DC22-90V AC95-265V 1000W 48V
MPPT Solar Power Grid Tie Inverter Discharge WIFI DC22-90V AC95-265V 1000W 48V
MPPT Solar Power Grid Tie Inverter Discharge WIFI DC22-90V AC95-265V 1000W 48V
MPPT Solar Power Grid Tie Inverter Discharge WIFI DC22-90V AC95-265V 1000W 48V
MPPT Solar Power Grid Tie Inverter Discharge WIFI DC22-90V AC95-265V 1000W 48V
MPPT Solar Power Grid Tie Inverter Discharge WIFI DC22-90V AC95-265V 1000W 48V
MPPT Solar Power Grid Tie Inverter Discharge WIFI DC22-90V AC95-265V 1000W 48V
MPPT Solar Power Grid Tie Inverter Discharge WIFI DC22-90V AC95-265V 1000W 48V
MPPT Solar Power Grid Tie Inverter Discharge WIFI DC22-90V AC95-265V 1000W 48V
MPPT Solar Power Grid Tie Inverter Discharge WIFI DC22-90V AC95-265V 1000W 48V
MPPT Solar Power Grid Tie Inverter Discharge WIFI DC22-90V AC95-265V 1000W 48V

MPPT Solar Power Grid Tie Inverter Discharge WIFI DC22-90V AC95-265V 1000W 48V
MPPT Solar Power Grid Tie Inverter Discharge WIFI DC22-90V – AC95-265V 1000W 48V. This Grid Tie Power Inverter is the world’s most technologically advanced inverter for use in utility-interactive applications. This integrated system maximizes energy harvest, increases system reliability, and implifies design, installation and management. The small type solar grid tie power inverter can obtain the solar energy from solar panel, and can tie to the grid through its output cables with no extra equipment. The installation is very convenient and reliable. We call the system combining with small solar grid tie inverter and solar panels as’SGPV’. The system includes solar panels and small type grid tie inverter and installation kit. Solar panels can be mono silicon, polygon silicon, non-crystal film or any other material that can transform solar energy to electric energy. The power of grid tie inverter should be matched to the power of solar panels connected. So the power of SGPV is defined by its solar panels, it can be standardization according to the actual using. The inverter can be connected to any outlets of utility grid at house. The small grid tie inverter monitors the volume, frequency and phase of the home utility grid, then produce pure sine wave AC power that the frequency and phase are as same as the grid’s, and the volume is a bit higher than the grid’s, then according to the current controlled PWM, to control the output power to the grid. The small grid tie inverter just puts out power when the home grid is on. When the sun shines, the PV panel will produces DC voltage, and the grid tie inverter will change the DC voltage to AC voltage and puts out power to the home grid. When the total power of electric apparatus that are using in the house is larger than the output power of the inverters, these power from the inverters will be consumed in the house, this will slow down the power meter, otherwise, the difference of the output power of the inverter between the total used power of the apparatus will go out from the house to the out grid. A Small Grid Tie Power System with the MSC Grid Tie Inverter. Multiple inverters can be connected in parallel to creat bigger system. Advantage of The MSC Grid Tie Power System. There are many advantages of SGPV compare with the traditional grid tie power system. Low cost and easy installation – SGPV can make full use of all types of buildings’ surface that face to the sun in the city as well as fast and easy installation of solar modules and grid tie inverter. It just needs very low maintenance costs. Free combination – SGPV can be used as a separate grid tie system and can be setup as a large solar array with many of them. The quantity of SGPV in the array is just according to your desire. If you are planning to install a grid-tie PV system, in a general way, the solar array and inverter need to be carefully matched to ensure that the inverter’s voltage and power limits are not exceeded. When you want to increase more solar panels, and if the total power of the solar panels exceeds the allocation grid inverter, it is necessary to increase the cost of a grid inverter. Combination of SGPV does not interact – The traditional mars rock solar grid tie system, they offer units ranging in high power output and these units are modular so you can have multiple units operating in parallel for large solar arrays. Although, the traditional grid inverter has MPPT feature (Maximum Power Point Tracking), but the maximum power point is according to the entire series in terms of solar panels array, if the erformance of a piece of solar panels in the system, for some reason, such as leaves, bird droppings, dust, shadow, etc. And degrades, the performance of the entire solar power system will decrease. SGPV has no such disadvantage. If the performance of a piece of solar panels in the system degrades, this just effects this piece itself, will not affect other SGPV in the system. Improving the efficiency of the entire solar power system – In traditional grid tie system, the solar panels are connected in series, so the MPPT of the inverter is according to the total panels in series, not to every panel, but there is difference between every panel, so not every panel is working at the maximum power, this will reduce the total power of these panel in series. But SGPV has no such disadvantage. Because every inverter of SGPV has MPPT function, so every panel is working at the maximum power, this will increase the efficiency of the entire system. Low power consumption – Most of the parts in the small grid-tie inverter are digital ICs and low power MCU, so the power consumption of it is low, though the quantity of grid tie inverters is increased, but this will not increase the power consumption much of the entire mars rock system. Why we produced the GRID TIE INVERTER WITH LIMITER? It is in response to the overwhelming clamor from our customers for a product that can control the amount of power that the grid tie inverters (GTI) can generate so that the amount of excess power produced by the solar panels are reduced to insignificant levels, if not eliminated — because in some countries, the producer pays for the excess power it gives to the distribution grid. This is because the electric power meters (the one provided by the electricity provider in the area) are not aware of the direction of power flow. In other words it only adds even if power is exported to the grid, thus, the consumers will be charged for power even if it is given to the grid, and this is the problem. This is the 2nd generation grid tie inverter with limiter. But in case customer install inverter far away from the main circuit breaker, we also enable the 2nd GTIL work with stand-alone limiter, we call this-external limiter. For sure, the inverter can work under normal Grid tie-no limit mode, just set on the nice LCD and save your setting. New upgraded firmware enable battery or solar limiter current and power model. User can set the maximum output power of inverter, this can make the inverter work at cooler contition as user want and extend the lifespan of the inverter. User can set kick in/off voltage of the inverter which can flexible using with battery bank depend on users mind and can prevent battery bank from over discharged. MSC Solar Turbine Grid Tie Inverter with Limiter. Auto: 115V(95V-140V); 230V(185V-265V). DC input voltage (Rectifier AC-DC). Auto: 50Hz(47.5-51.5Hz);60V(59.3-60.5Hz). Over Current Protection 2. Over Temperature Protection 3. Reverse Polarity Protection 4. Integrate with internal limiter and external limiter function which can prevent excess power from going to the public grid. Utility grid AC voltage, waveform, frequency 2. Every day power and power generation curve, total power 3. Shows real time power, input voltage, inside temperature, date and time 4. Set the clock and date. Blue(stock), Gold and Silver(custom-made). Plug(EU or USA standard). Installing MSC Grid Tie Power System involves several key steps. Considering the total capacity of the grid tie power system that you need. Choosing applicable solar panels for Sunshine Grid Tie Inverter. Selecting accessory for installation of the Grid Tie Power System. Selecting correct model of Sunshine Grid Tie Inverter. Installing solar panels to suitable place. Installing Sunshine Grid Tie Inverter to suitable place. Connecting Sunshine Grid Tie Power System with cables and connectors. Completing Sunshine installation map and Connecting the PV modules. Example of Installation of 1KW grid tie power system. In order to explain the installing operation, we assume that there is a house that the usual electricity consumption is about 5KWH per day, and the real irradiation time is about 5 hours. 1, Considering the total capacity of the grid tie power system that you need. As we stated at Step1, we can get a result that a 1kW Sunshine Grid Tie Power System is suitable for this house, so we will establish a 1KW gird tie power system step by step, we also assume that we will install the system in the house where the utility grid is 230V/50Hz. 2, Choosing applicables Solar Panels. Because the most popular solar panels are 240Wp250Wp poly panels with 60 PCS solar cells. So choosing this kind type panels will be more economical. The system is 1KW power system, so we should use 4 PCS 240Wp to 250Wp. Most of this kind type solar panels have similar specification shown below. Module Efficiency:14.8%; Pmax:245W Vmp:29.4V; Imp:8.34A. Voc:36.9V; Isc:8.68A. So use 4 PCS of this type panels, we can get total power. TPmax = 245Wp×4 = 980Wp. From these solar panels, it is suitable for 1KW SUN-1000G model inverter. 3, Selecting Accessory for Grid Tie Power System installation. Because we should connect 4 PCS solar panels to Sunshine Grid Tie Inverter, so some connectors are necessary. Consider of the Voc, Vmp and Isc, we choose some MC4 connectors and some connectors for parallel connecting. 4, Selecting correct model of MSC Grid Power Inverter. Because maybe there will be several methods of. Connecting solar panels to MSC Grid Tie Inverter, different connecting method maybe should use different model inverter. In this case, there are two connecting methods. Limit Function Connecting Instruction. AC grid: The limit sensor should be clamped on the live line at the position before the loads access points, and the inverter access point can be at any position on the same live line, see picture 1. The inverter with limit function will just produce power that is less than total power consuming by loads that connected after the position that the limit sensor clamped. The inverter will not measure loads’ power that connected before the point of the limit sensor clamped. AC grid: If your AC grid is three phases grid, and also you have more grid tie inverters, then you can connect inverters to three phases individually. Please see picture 2. These 3 inverters will not affect each other. G line will be connected as normal. There may be some delays due to flight, holiday, weather, local post, local natural disaster impact. It must also be in the original packaging. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “audosta” and is located in this country: CN. This item can be shipped worldwide.
  • Color: With Wifi Module
  • Input Voltage: 22-60V
  • Output Voltage: 95-265V
  • Current Rating: Standard
  • Model: 6985875248
  • Country/Region of Manufacture: China
  • Weight: 4.0Kg
  • AC output: Auto: 115V(95V-140V); 230V(185V-265V)
  • Accessories: Limiter(sensor); Wifi(optional); Plug(EU or USA…
  • Frequency: Auto: 50Hz(47.5-51.5Hz);60V(59.3-60.5Hz)
  • Is Smart Device: YES
  • MPPT Effeciency: 99%
  • Current Type: AC/DC
  • System Configuration: Standard
  • Type: MPPT Solar Power Grid Tie Inverter
  • Features: LCD Display
  • MPN: 6985875267
  • Power: Standard
  • Current Output: Standard
  • Brand: Unbranded
  • Application: Small Home PV Systems, Other
  • Charging Mode: MPPT (Maximum Power Point Tracking)
  • Output Current: 8.3A@120V; 4.3A@230V
  • Output Frequency: Auto: 50Hz(47.5-51.5Hz);60V(59.3-60.5Hz)
  • Output Power: 1000W(Rated)
  • Output Type: Single
  • Output waveform: Pure Sine Wave
  • Rated Voltage: 24V/ 48V
  • Rated Power: 1000W
  • Resistance Properties: Other
  • Voltage: Standard

MPPT Solar Power Grid Tie Inverter Discharge WIFI DC22-90V AC95-265V 1000W 48V
Category: mppt | Comments Off
November 16

MPPT Solar Grid Tie Micro Inverter MONITORING SYSTEM Built-in WIFI Data Terminal

MPPT-Solar-Grid-Tie-Micro-Inverter-MONITORING-SYSTEM-Built-in-WIFI-Data-Terminal-01-qvpo MPPT Solar Grid Tie Micro Inverter MONITORING SYSTEM Built-in WIFI Data Terminal
MPPT Solar Grid Tie Micro Inverter MONITORING SYSTEM Built-in WIFI Data Terminal
MPPT Solar Grid Tie Micro Inverter MONITORING SYSTEM Built-in WIFI Data Terminal
MPPT Solar Grid Tie Micro Inverter MONITORING SYSTEM Built-in WIFI Data Terminal
MPPT Solar Grid Tie Micro Inverter MONITORING SYSTEM Built-in WIFI Data Terminal
MPPT Solar Grid Tie Micro Inverter MONITORING SYSTEM Built-in WIFI Data Terminal
MPPT Solar Grid Tie Micro Inverter MONITORING SYSTEM Built-in WIFI Data Terminal
MPPT Solar Grid Tie Micro Inverter MONITORING SYSTEM Built-in WIFI Data Terminal
MPPT Solar Grid Tie Micro Inverter MONITORING SYSTEM Built-in WIFI Data Terminal
MPPT Solar Grid Tie Micro Inverter MONITORING SYSTEM Built-in WIFI Data Terminal
MPPT Solar Grid Tie Micro Inverter MONITORING SYSTEM Built-in WIFI Data Terminal
MPPT Solar Grid Tie Micro Inverter MONITORING SYSTEM Built-in WIFI Data Terminal

MPPT Solar Grid Tie Micro Inverter MONITORING SYSTEM Built-in WIFI Data Terminal
MPPT Solar Grid Tie Micro Inverter MONITORING SYSTEM Built-in WIFI Data Terminal. (NEW Version can be monitored via WIFI and Bluetooth). 1 Piece MPPT Waterproof Inverter. 2, comes with one piece 2 meter AC power cable. Fixing use Screws and Nuts 2 Set. 1 Piece User Manual (English). Maximum power point tracking. Internal high precision meter. No installation, no maintenance. 11.5G lot platform management. The biggest feature of the photovoltaic grid-connected system is that the DC power generated by the photovoltaic array is converted into AC power that meets the requirements of the commercial power grid through the grid-connected inverter, and then directly connected to the commercial power grid. The power generated by the panel array in the grid-connected system is preferentially supplied to the AC At the load side, excess power is fed back to the grid. On rainy days or nights, when the photovoltaic array does not generate electrical energy or the generated electrical energy cannot meet the load demand, it is powered by the grid. Installation of micro inverter. Installation for fixed the inverter on the PV holder with the screws attached is as following. Connect the two DC terminal of the PV to the inverter, positive to positive, negative to negative. Open the waterproof cap on AC output side of the micro inverter, then plug to AC power line. Plug the AC output line to main AC cable. Repeat the first step to the third step to complete the installation of micro inverters. There may be some delays due to flight, holiday, weather, local post, local natural disaster impact. It must also be in the original packaging. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “audosta” and is located in this country: CN. This item can be shipped worldwide.
  • Color: WVC1200 Mobile APP
  • Input Voltage: 22V-60VDC
  • Output Voltage: 85-263VAC Auto Sense
  • System Configuration: Grid-Tie
  • Power Source: Solar
  • Size: Standard
  • Custom Bundle: No
  • Brand: Unbranded
  • Type: MPPT Solar Grid Tie Micro Inverter
  • Current Type: AC/DC
  • Model: 08544
  • Recommended Environment: Indoor/Outdoor
  • Features: Durable
  • Charging Mode: MPPT (Maximum Power Point Tracking)
  • Resistance Properties: Durable
  • Country/Region of Manufacture: China
  • Application: Electronics
  • Power: 2800/2400/2000/1600/1400/1200W

MPPT Solar Grid Tie Micro Inverter MONITORING SYSTEM Built-in WIFI Data Terminal
Category: mppt | Comments Off
October 22

MPPT Solar Grid Tie Micro Inverter Dual 1400W IP65 30V 36V DC 110V 220VAC Kits

MPPT-Solar-Grid-Tie-Micro-Inverter-Dual-1400W-IP65-30V-36V-DC-110V-220VAC-Kits-01-sioi MPPT Solar Grid Tie Micro Inverter Dual 1400W IP65 30V 36V DC 110V 220VAC Kits
MPPT Solar Grid Tie Micro Inverter Dual 1400W IP65 30V 36V DC 110V 220VAC Kits
MPPT Solar Grid Tie Micro Inverter Dual 1400W IP65 30V 36V DC 110V 220VAC Kits
MPPT Solar Grid Tie Micro Inverter Dual 1400W IP65 30V 36V DC 110V 220VAC Kits
MPPT Solar Grid Tie Micro Inverter Dual 1400W IP65 30V 36V DC 110V 220VAC Kits
MPPT Solar Grid Tie Micro Inverter Dual 1400W IP65 30V 36V DC 110V 220VAC Kits
MPPT Solar Grid Tie Micro Inverter Dual 1400W IP65 30V 36V DC 110V 220VAC Kits
MPPT Solar Grid Tie Micro Inverter Dual 1400W IP65 30V 36V DC 110V 220VAC Kits
MPPT Solar Grid Tie Micro Inverter Dual 1400W IP65 30V 36V DC 110V 220VAC Kits
MPPT Solar Grid Tie Micro Inverter Dual 1400W IP65 30V 36V DC 110V 220VAC Kits
MPPT Solar Grid Tie Micro Inverter Dual 1400W IP65 30V 36V DC 110V 220VAC Kits
MPPT Solar Grid Tie Micro Inverter Dual 1400W IP65 30V 36V DC 110V 220VAC Kits

MPPT Solar Grid Tie Micro Inverter Dual 1400W IP65 30V 36V DC 110V 220VAC Kits
MPPT Solar Grid Tie Micro Inverter Dual 1400W IP65 30V 36V DC 110V 220VAC Kits. Single unit connects up to two PV modules:? Maximum 700W AC output power? Single-phase output, Flexible 3-phase PV systems? 2.4G wireless communication and monitoring? Up to 7 units (230V) per branch? Customizable various input (DC, PV) voltage range? Integrated AC bus cable, Ready-To-Use? Low cost, Easy installation. Max units per branch. Auto switch 50/60Hz(47.5-62.5Hz). AC Cable withstand max current. 2.4G wireless(Inverter to DataBox). High frequency transformer isolation. Reverse transfer, load priority. Islanding, Over-temperature, Over / low AC & AC voltage. DIN VDE 1026 UL1741. EC1400 Microinverters per branch. The max DC input power of each inverter is. (the PV module max output power is 4350W). Of PV modules should not be greater than the max DC input voltage of Microinverters. Two-Phase 208/240V(Single-Phase 120V). Of PV modules should not be greater than the max DC input voltage of M. Three Phase 380V(Single-Phase 230V). Three-Phase 208/240V(Single-Phase 120V)? There may be some delays due to flight, holiday, weather, local post, local natural disaster impact. It must also be in the original packaging. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “audosta” and is located in this country: CN. This item can be shipped worldwide.
  • Color: With AC Meter
  • Input Voltage: 18V-50V
  • Output Voltage: 80V-280V
  • Size: 250mm x 230mm x 38mm
  • Current Rating: Standard
  • Model: 0889136274
  • Country/Region of Manufacture: China
  • Maximum Input Power: 4*350W
  • Output Frequency: 50Hz/60 Hz
  • Output Power: 1400W(Maximum)
  • Output Type: Single-Phase Grid Type
  • Rated Output Power: 1350W
  • Waterproof Grade: IP65
  • Weight: 2.5kg
  • Communication(Inverter to DataBox): 2.4G Wireless
  • Cooling Mode: Natural Convection – No Fans
  • Default Output Voltage Range: 80V-160V or 180V-280V
  • Max Current of AC Bus Cable: 40A
  • Current Type: AC/DC
  • System Configuration: Other
  • Maximum Units per Branch: 120VAC by 3 units or 230VAC by 6 units
  • Type: MPPT Solar Grid
  • Features: Durable
  • MPN: 0889136293
  • Power: 1400W
  • Current Output: Standard
  • Brand: Unbranded
  • Application: Electronics
  • Charging Mode: Standard
  • MPPT Voltage Range: 24V-40V
  • Nominal Output Current: 11.25A/5.86A
  • Nominal Output Frequency: 50Hz/60 Hz
  • Nominal Output Voltage: 120VAC/230VAC
  • Number of Input MC4 Connector: 4 set
  • Operation Voltage Range: 18V-50V
  • Output Current: 11.25A/ 5.86A
  • Resistance Properties: Standard
  • Voltage: 30V 36V DC 110V 220VAC

MPPT Solar Grid Tie Micro Inverter Dual 1400W IP65 30V 36V DC 110V 220VAC Kits
Category: mppt | Comments Off
September 30

MPPT Solar Grid Tie Micro Inverter 300-700W DC26V-46V to AC110V-230V 50HZ/60HZ

MPPT-Solar-Grid-Tie-Micro-Inverter-300-700W-DC26V-46V-to-AC110V-230V-50HZ-60HZ-01-ich MPPT Solar Grid Tie Micro Inverter 300-700W DC26V-46V to AC110V-230V 50HZ/60HZ
MPPT Solar Grid Tie Micro Inverter 300-700W DC26V-46V to AC110V-230V 50HZ/60HZ
MPPT Solar Grid Tie Micro Inverter 300-700W DC26V-46V to AC110V-230V 50HZ/60HZ
MPPT Solar Grid Tie Micro Inverter 300-700W DC26V-46V to AC110V-230V 50HZ/60HZ
MPPT Solar Grid Tie Micro Inverter 300-700W DC26V-46V to AC110V-230V 50HZ/60HZ
MPPT Solar Grid Tie Micro Inverter 300-700W DC26V-46V to AC110V-230V 50HZ/60HZ
MPPT Solar Grid Tie Micro Inverter 300-700W DC26V-46V to AC110V-230V 50HZ/60HZ
MPPT Solar Grid Tie Micro Inverter 300-700W DC26V-46V to AC110V-230V 50HZ/60HZ
MPPT Solar Grid Tie Micro Inverter 300-700W DC26V-46V to AC110V-230V 50HZ/60HZ

MPPT Solar Grid Tie Micro Inverter 300-700W DC26V-46V to AC110V-230V 50HZ/60HZ
MPPT Solar Grid Tie Micro Inverter 300-700W DC26V-46V to AC110V-230V 50HZ/60HZ. GMI Series 300W 350W 500W 600W 700W MPPT Solar Grid Tie Micro Inverter DC26V-46V to AC110V-230V 50HZ/60HZ Solar PV Inverter. 300W/350W Grid Tie inverter is a compact unit, which directly converts direct current into alternating current for powering appliances and/or office equipment’s and connecting to utility grid. The AC output from Smart Micro inverter is synchronized and in-phase with the utility grid. Maximum Output Power:300W/350W/500W/600W/700W. Rated Output Power:280W/320W/480W/580W/680W. AC Output Voltage: 120V/240V. Frequency Range: 50/60HZ Auto. MPPT range: 24V – 40V. Solar Panel Voltage: Vmp30-39V; Voc38-46V. Solar Panel Power: maximum 300W/350W/500W/600W/700W. Use solar panel ONLY connect to this equipment. This equipment is ON-GRID Microinverter, To make it work properly, it must be connected to the power grid correctly, and the power grid is working properly, When the power grid stopped working, it will also stop generating. Do NOT exceed PV panel(s) voltage over the inverter max input voltage. Do NOT exceed PV panel(s) power over the inverter max input power. The positive and negative poles of the solar panel cannot be reversed. If you extend the solar panel cable. You need to be careful about this problem. Install away from direct sunlight and direct rain exposure. The 18-50V grid tie micro inverter will start up at 24V, after starting, the inverter can work in 18V-39V (Vmp). Solar Panel Voc cannot be higher than 50V. Vmp = solar panel working voltage; Voc = solar panel open circuit voltage. So don’t think that 50V is the working voltage (Vmp). Why not use 12V solar panels? 12V panel working voltage Vmp18-20V, open circuit voltage Voc20-24V. The 12V panel is just a starting voltage. If the sunlight is weak, the working voltage will be lower than 18V. It is easy to make the inverter work unstable, and the inverter will start repeatedly. It is easy to damage the inverter. Recommended Solar Panel Voltage: Vmp30-39V; Voc38-46V. Green light steady=Microinverter in generating. Red flash=Microinverter in waiting. Over/low AC voltage protection. Over/low DC voltage protection. Over/low AC frequency protection. 1 x AC Cable 30CM. There may be some delays due to flight, holiday, weather, local post, local natural disaster impact. It must also be in the original packaging. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “audosta” and is located in this country: CN. This item can be shipped worldwide.
  • Color: GMI-500W
  • Input Voltage: 18V-50VDC
  • Output Voltage: 180V-280VAC
  • Size: 35mm x 76mm x233mm
  • Current Rating: Standard
  • Inverter Technology: Microinverter
  • Model: 5321559736
  • Country/Region of Manufacture: China
  • Current Type: AC/DC
  • System Configuration: Grid-Tie
  • Type: DC/AC Inverters
  • Features: Standard
  • MPN: 5321559756
  • Power: 300-700W
  • Current Output: Standard
  • Brand: Unbranded
  • Application: Electronics
  • Charging Mode: MPPT (Maximum Power Point Tracking)
  • Output Current: 12A/14A
  • Output Frequency: 50-60Hz
  • Output Power: 301 – 400W
  • Output Type: Single
  • Weight: 0.56
  • Resistance Properties: Standard
  • Voltage: Standard

MPPT Solar Grid Tie Micro Inverter 300-700W DC26V-46V to AC110V-230V 50HZ/60HZ
Category: mppt | Comments Off
June 15

MPPT Solar Dc Grid Tie Inverter With Limiter Sensor Battery Discharge Power Mode

MPPT-Solar-Dc-Grid-Tie-Inverter-With-Limiter-Sensor-Battery-Discharge-Power-Mode-01-hsqs MPPT Solar Dc Grid Tie Inverter With Limiter Sensor Battery Discharge Power Mode
MPPT Solar Dc Grid Tie Inverter With Limiter Sensor Battery Discharge Power Mode
MPPT Solar Dc Grid Tie Inverter With Limiter Sensor Battery Discharge Power Mode
MPPT Solar Dc Grid Tie Inverter With Limiter Sensor Battery Discharge Power Mode
MPPT Solar Dc Grid Tie Inverter With Limiter Sensor Battery Discharge Power Mode
MPPT Solar Dc Grid Tie Inverter With Limiter Sensor Battery Discharge Power Mode
MPPT Solar Dc Grid Tie Inverter With Limiter Sensor Battery Discharge Power Mode
MPPT Solar Dc Grid Tie Inverter With Limiter Sensor Battery Discharge Power Mode
MPPT Solar Dc Grid Tie Inverter With Limiter Sensor Battery Discharge Power Mode
MPPT Solar Dc Grid Tie Inverter With Limiter Sensor Battery Discharge Power Mode
MPPT Solar Dc Grid Tie Inverter With Limiter Sensor Battery Discharge Power Mode
MPPT Solar Dc Grid Tie Inverter With Limiter Sensor Battery Discharge Power Mode

MPPT Solar Dc Grid Tie Inverter With Limiter Sensor Battery Discharge Power Mode
MPPT Solar Dc Grid Tie Inverter With Limiter Sensor Battery Discharge Power Mode. 1200w Grid Tie Inverter With Limiter Sensor+battery Discharge Power Mode Dc Home. With imported high-speed main control chip and power device to improve system stability. Advanced Maximum power point tracking (MPPT)to ensure the high efficiency of system. Efficiency of MPPT > 99%. Solar modules can be serial/parallel input for easy adjustment of system combination power. High-efficiency and frequency transformer, sufficient patents. Multiple software, hardware system protection, advanced modular design, safe and reliable. LCD rich content display function, user interface, clear and intuitive. Lightweight, easy to install, operate and maintain. Supports access to various DC sources for discharge and can be used as energy-saving. Support RS-485 communication function, data transmission and remote control to operate. How to connect the sensor? Conect the RS485 cable of the AC power acquisition meter to the 485 port of the inverter. Plug the connection terminal of the transmitted current sensor into the port of the collector “CT-IN” (no +-). Connect the AC power supply port “AC-IN” of the collector to the same AC power supply for the load. After the connection, it will light up. In the inverter LCD, enter the “battery grid connection”, through the SET {Bat AutoLimit Grid}. Connect the inverter to AC power first, then connect the battery, the inverter will automatically output the same power as the power detected by the collector. Therefore, the inverter will not have excess electricity to be sent to the grid (ie: automatic limiter function). One acquisition meter can connect 5 unit grid tie inverter. 1000W Grid tie inverter with limiter 5 kind different specifications for 5 kind DC input solar panels or batteries, please choose the right one. 1000W (5 kinds of DC input voltage specifications). Recommended PV module power range(W). DC input branch number. MPPT tracking range (V). Battery voltage suitable for connection(V). Battery start voltage can be set range (V). Battery under voltage shutdown voltage can be set range (V). Maximum operating protection current (A). AC output parameters (AC110 / AC220,48-62HZ). Rated AC output power(w). Battery mode can set the output power (W). Battery limit mode maximum output power. Maximum AC current(A). AC frequency range (HZ). Maximum inverter conversion efficiency. Night standby power consumption. Output current total harmonic distrotion rate. Color LCD display(Chinese / English switchable display). DC overvoltage / overcurrent; AC overvoltage / overcurrent / over frequency; over temperature protection. Packing size (l X w X h mm). Natural cooling + fan. Single crytal, polycrystalline components, amorphous, thin film, lead-acid batteries, lithium batteries, switching power supplies, chargers, etc. RS485+limiter sensor=grid tie inverter with limiter. According to customer requirements to adjust or selected. 1200W Grid tie inverter with limiter 3 kind different specifications for 3 kind DC input solar panels or batteries, please choose the right one. 1200W (3 kinds of DC input voltage specifications). PV module maximum input power (W). MPPTworking voltage range (V). AC output parameters (AC110 / AC220). AC maximum output power (W). Color LCD (Chinese / English switchable display). Monocrystalline components, polycrystalline components, amorphous, thin film, lead-acid batteries, lithium batteries, switching power supplies, chargers, etc. The product came very well packaged. I’m very happy. Thank you for everything. The product looks amazing. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “titan_store3″ and is located in this country: CN.
  • Input Voltage: PV120-180V (96V BAT)
  • Socket Type: Universal
  • Output Voltage: AC 110V-120V
  • Color: 1000W With Limiter
  • Size: 305*190*85 Mm
  • Current Rating: 5A-10A
  • Model: CRT017
  • Country/Region of Manufacture: China
  • Application 2: Work For Solar Panel. Battery, Battery Discharge
  • Custom Bundle: No
  • Free 60 Days Return?: Yes
  • Taxes: Off
  • Note: The Product as Special Price for Limited Time
  • Easy To Use ?: Yes.
  • Customer Service: ! Solve Any Problem ! 24/7
  • Handling Tme:: Up To 5 Business Days (Usually Same Day)
  • Shipping:: Free and Fast Shipping
  • Product Information:: New Product and High Quality
  • For Any Question:: Connect Us and We Will Happy to Help You
  • Current Type: DC
  • System Configuration: Grid-Tie
  • Payment: Paypal
  • Certification: Ce
  • Origin: Cn(origin)
  • Model Number: Gtn
  • Output Frequency: 50hz/60hz(45-53hz Or 55hz-63hz)
  • Output Type: Single
  • Power Source: Solar
  • Output Power: 1 – 200kw
  • Type: Dc/ac Inverters
  • Features: LCD Display, Portable
  • MPN: TRXA1S1
  • Power: 901-1000 W
  • Current Output: 5A-10A
  • Brand: TitanStore
  • Application: Commercial, Home/Garden
  • Charging Mode: MPPT (Maximum Power Point Tracking)
  • Weight: 5kg
  • Is_customized: Yes
  • Output Current: 5a-10a
  • Wave Form: Pure Sine Wave
  • Display: Lcd Display
  • Compatible: Solar Panels Or Battery
  • Application 1: Work For Solar Panel. Battery, Battery Discharge
  • Voltage: Ac 110v-120v ; Ac 220v-240v

MPPT Solar Dc Grid Tie Inverter With Limiter Sensor Battery Discharge Power Mode
Category: mppt | Comments Off
April 23

MPPT Solar Dc Grid Tie Inverter With Limiter Sensor Battery Discharge Power Mode

MPPT-Solar-Dc-Grid-Tie-Inverter-With-Limiter-Sensor-Battery-Discharge-Power-Mode-01-fth MPPT Solar Dc Grid Tie Inverter With Limiter Sensor Battery Discharge Power Mode

MPPT Solar Dc Grid Tie Inverter With Limiter Sensor Battery Discharge Power Mode
MPPT Solar Dc Grid Tie Inverter With Limiter Sensor Battery Discharge Power Mode. The product came very well packaged. I’m very happy. Thank you for everything. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “yossi-store” and is located in this country: CN. This item can be shipped worldwide.
  • Color: With Limiter
  • Input Voltage: PV 55-90V(48V BAT)
  • Output Voltage: 180V-260VAC50HZ60HZ
  • Socket Type: 1200W
  • Current Type: DC
  • System Configuration: Grid-Tie
  • Brand: Unbranded

MPPT Solar Dc Grid Tie Inverter With Limiter Sensor Battery Discharge Power Mode
Category: mppt | Comments Off
April 17

1000 W MPPT 10.5 V-28 V DC Grid Tie Inverter 50-60 HZ 110 V-120 V190 V-2401000w

1000-W-MPPT-10-5-V-28-V-DC-Grid-Tie-Inverter-50-60-HZ-110-V-120-V190-V-2401000w-01-obp 1000 W MPPT 10.5 V-28 V DC Grid Tie Inverter 50-60 HZ 110 V-120 V190 V-2401000w
1000 W MPPT 10.5 V-28 V DC Grid Tie Inverter 50-60 HZ 110 V-120 V190 V-2401000w
1000 W MPPT 10.5 V-28 V DC Grid Tie Inverter 50-60 HZ 110 V-120 V190 V-2401000w
1000 W MPPT 10.5 V-28 V DC Grid Tie Inverter 50-60 HZ 110 V-120 V190 V-2401000w
1000 W MPPT 10.5 V-28 V DC Grid Tie Inverter 50-60 HZ 110 V-120 V190 V-2401000w
1000 W MPPT 10.5 V-28 V DC Grid Tie Inverter 50-60 HZ 110 V-120 V190 V-2401000w

1000 W MPPT 10.5 V-28 V DC Grid Tie Inverter 50-60 HZ 110 V-120 V190 V-2401000w
Unique and intuitive display design – LED cycling in circular formation – Represent electric meter spinning backward and power is being output to the grid – Smooth motion. Green ergyStar 1000W MPPT. For Solar & Wind Hybrid Systems. MPPT to Enhance Power Output by 30%! Of all the different kinds of renewable energy available today, solar and wind are the two most popular ones favored by homeowners due to their. Easy implementation and wide range of suitable sites. However, these green energy sources do not come with a plug to connect to a wall socket (the grid). Even if they do, there are different parameters for each type of renewable energy and interconnecting with the grid would present a challenge. Fortunately, grid-tie inverters have been invented to solve this interconnection problem. What is grid-tie inverter? A Grid-Tie Inverter is a device that that can transform 12V DC electricity i. Solar Panels, Wind Turbine, Battery Storage into 220V AC power that can be directly injected into your utility’s electricity network (the power grid). However, the down side is, most inverters available in the market today are in the high output (3000W 8000W) category. Their prices range in the thousands and it is just too much of an upfront cost for anyone interested in green energy generation. In addition, because of the high output, a certified electrician will need to be hired to install the equipments and connect the cables. I would also like to DIY to cut down on cost and have a project that I would be proud to work on… Isn’t there an. Way to do this? With our latest developed micro grid-tie inverter Grid Power 3 feature the popular plug and play function, you will be connecting your renewable energy sources into the grid and join the green movement in no time. A Greener future awaits. What’s New in the 3rd Generation? So you ask, What’s new in this third generation? Well, by reaching the 3rd generation, we have again improved the power output by incorporating Maximum Power Point Tracking (MPPT) technology to harvest more solar energy. The inverter has also utilized better surge protection components to shield against voltage spikes and energy surges. In addition, this inverter will work with our SolarWind Hybrid RX charge controller to allow wind energy input. Here are the high lights: Maximum Power Point Tracking (MPPT). What is Maximum Power Point Tracking (MPPT)? MPPT is a techinque we implemented to get the maximum possible power from a solar panel. When trying to characterize the output of a solar panel mathematically, it can be represented by an IV-Curve (shown below). The equation for Power is P = IV. Where I is the Current, V is the Voltage, and P is the possible output Power. Each point on the curve is a possible combination for output power and our goal is to find the best combination to obtain maximum power. In simple terms, we are trying to get the biggest rectangle to fit under this so called IV-Curve, the bigger rectangle we can fit, the more power we get. Below are graphs to help you understand the idea better. This is a comparison between inverters with and without MPPT on an 85W solar panel. Please note that different solar panels will have slightly different IV-Curves. No Tracking Vs Tracking. Figure 1 No MPPT, with voltage fixed 17.5V P = 17.5V x 4.6A = 80.5W. Figure 2 With MPPT, amount of current and voltage to draw are calculated P = 17V x 4.95A = 84.15W. As we can see, Figure 2 is able to 84.15W with MPPT while in Figure 1, we can only get 80.5W. This is 4.5% increase in power output. Why do we care? Because solar panels are still quite expensive these days, and the increased power output will directly affect our return on investment (ROI). In addition, depending on weather, time of the day and amount of solar irradiation the panel receives, the IV curve will move along the Y-axis to reflect the possible increase / decrease in potential power output, and cause the maximum power point to shift along as well. Coming up are illustrations to visualize this idea. IV-Curves Under different weather conditions. Sunny, Clear Sky days in Summer 600 1000 W/m2. Scattered Clouds or Partly Cloudy days in Summer 300 600 W/m2. Cloudy or fog days, dawn or dusk in Summer 100 300 W/m2. Figure 3 – 5 illustrate the power gain in different weather condition with MPPT compare to a non-tracking inverter that locks voltage at 17.5V. While 17.5V is randomly chosen, it does show what would happen in real life when there is not MPPT. Studies have shown, by making use of MPPT, there will be an average of 30% increase in power production. Since the maximum power point is a variable, we have implemented a tracking algorithm that utilizes the micro processing power of our inverter to calculate the optimum voltage and current to maximize our energy harvest. In 2008, when we designed the first generation inverter, what we had in mind was an inexpensive device to allow the public to have a chance to test out renewable energy production and promote the green movement at an affordable price range. As people’s environmental awareness increased over the years, the demand for bigger systems also increase. Therefore, once again, the power of this inverter has increased to accomodate market demand. Compatibility with GreenergyStar SolarWind Hybrid RX Charge Controller. Want to grid-tie a wind system? Then it is time to get a charge controller. The GreenergyStar SolarWind Hybrid RX is designed to work with our grid-tie inverters for solar and wind applications. It offers the protection needed by inverters against volatile storms and unstable inputs. Compatible with solar panels, 12V AC / DC wind turbines, Southwest Windpower’s Air-X, 403, 303 and SunForce’s 600W wind turbines. In this generation, we have utilized better surge protection components to shield against potential energy surges during connection or disconnection to the grid. Voltage spikes in night time or stormy weathers are eliminated with higher grade electronics. The circuit board has been completely redesigned to accommodate to the UL 1741 Standard and the status of our UL application is currently pending. Maximum Power Point Tracking (MPPT) – optimize power output. Enhanced in power output compare to second generation inverters. Unique and intuitive LED display design to reflect power output rate. Allow MORE types of power source to be connected with SolarWind Hybrid RX Charge Controller ie: Air-X, 12V battery, and etc. Grid-tied – sell green energy back to the utility at a premium rate. Plug and Play design, simple and easy. No hard-wiring or rewiring of existing electronics. Island Protection: Inverter will shut down during black outs. Synchronize with grid and generates pure Sine Wave. Stackable (connect in parallel for higher output). Maximum input power: 1000W (rated at 16.6V and 60A). System Voltage: 12V Nominal (see input / output sections for range). 3x External 30A fuse for easy maintenance. Internal diode to prevent reverse current to solar panels or wind turbine at night. High quality finned aluminum casing to protect internal electronics and act as heat sink to dissipate heat. Microprocessor based control electronics to regulate input and output. Connects directly to Nominal 12V Solar Panels. Nominal 12V AC or DC wind turbine installations with battery will require respective charge controllers and dump loads. Recommend using the GreenergyStar SolarWind Hybrid RX charge controller to monitor charging and discharging. Connect the included cable to the inverter, and then connect the other end to a wall socket. Reverse polarity in input will blow fuse and possibly. Damages caused by reverse polarity is. Maximum AC Output Power. 190V 260V Auto Switching. Total Harmonic Distortion (THD). Yes, Inverter will disconnect from grid during black out. 35V (anything above will damage inverter). Above 90A will blow fuse. Under 90A will heat up internal electronics. Disconnect immediately do avoid damage. 20’C – 60’C. 2.04kg 4.5lb. Dimension (L x W x H). 28.0 x 16.5 x 5.4 cm 11.0 ” x 6.5″ x 2.1. Wall Mount at base. Convection cooled with fan. High quality finned aluminum to act as heat sink for fast heat dissipation. 6 Green, 1 Orange and 1 Red LED. 1X Grid Power grid-tie inverter. 1X 1.5m North America Standard AC Cable. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “ahadk1″ and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, Korea, South, Indonesia, Taiwan, South Africa, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Croatia, Republic of, Malaysia, Chile, Colombia, Costa Rica, Dominican Republic, Panama, Trinidad and Tobago, Guatemala, El Salvador, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Pakistan, Paraguay, Reunion, Uruguay.
  • Brand: GreenergyStar
  • Current Type: AC/DC
  • Type: Charger/Inverter
  • System Configuration: Grid-Tie
  • Cooling: Fan-Cooling
  • Voltage: 1000 VAC or Greater
  • Wattage: 1000W
  • Recommended Environment: Indoor/Outdoor
  • Material: Aluminum Alloy
  • Charging Mode: MPPT (Maximum Power Point Tracking)
  • Application: Agriculture/Farming, Aquaculture, Automotive, Back-up Power, Camping/Hiking, Commercial, Electronics, Home/Garden, Irrigation, Marine, Municipal, Pool, Recreational Vehicle (RV), Shed
  • Protection Properties: Low Voltage Protection,Overload Protection

1000 W MPPT 10.5 V-28 V DC Grid Tie Inverter 50-60 HZ 110 V-120 V190 V-2401000w
Category: mppt | Comments Off
February 21

MPPT Solar PV Grid Tie Micro Inverter Lot Monitoring System WiFi Data Terminal

MPPT-Solar-PV-Grid-Tie-Micro-Inverter-Lot-Monitoring-System-WiFi-Data-Terminal-01-vhzt MPPT Solar PV Grid Tie Micro Inverter Lot Monitoring System WiFi Data Terminal
MPPT Solar PV Grid Tie Micro Inverter Lot Monitoring System WiFi Data Terminal
MPPT Solar PV Grid Tie Micro Inverter Lot Monitoring System WiFi Data Terminal
MPPT Solar PV Grid Tie Micro Inverter Lot Monitoring System WiFi Data Terminal
MPPT Solar PV Grid Tie Micro Inverter Lot Monitoring System WiFi Data Terminal
MPPT Solar PV Grid Tie Micro Inverter Lot Monitoring System WiFi Data Terminal
MPPT Solar PV Grid Tie Micro Inverter Lot Monitoring System WiFi Data Terminal
MPPT Solar PV Grid Tie Micro Inverter Lot Monitoring System WiFi Data Terminal
MPPT Solar PV Grid Tie Micro Inverter Lot Monitoring System WiFi Data Terminal
MPPT Solar PV Grid Tie Micro Inverter Lot Monitoring System WiFi Data Terminal
MPPT Solar PV Grid Tie Micro Inverter Lot Monitoring System WiFi Data Terminal
MPPT Solar PV Grid Tie Micro Inverter Lot Monitoring System WiFi Data Terminal

MPPT Solar PV Grid Tie Micro Inverter Lot Monitoring System WiFi Data Terminal
MPPT Solar PV Grid Tie Micro Inverter Lot Monitoring System WiFi Data Terminal. There are 3 version. WVC1200W/WVC-1400W/WVC-16000W (WIFI 433MHZ version). Inverter can be compatible with wifi-modem, Note: this price is without modem, just WVC solar grid tie inverter!!! WVC1200W-Life/WVC-1400W-Life /WVC-1600W-Life (Mobile APP). WVC1200W/WVC-1400W/WVC-1600W (with 433MHZ WIFI WVC Modem)Updated type, inverter comes with the new WVC WIFI Modem, can also remote monitoring by Mobile app, better use for Large-scale solar system. The inverter is equipped with 433MHz communication function as standard, and can communicate with our data collector (optional), and the data collector only needs to be connected to a wireless router to obtain various real-time data in the power station and upload it To the cloud server. Users only need to install our power station management application on their mobile phones to easily access various data in the power station and manage the power station. The fifth generation WVC series communication products of us, adopt waterproof flow line design, which can provide better heat dissipation function for the equipment. The built-in maximum power point tracking engine (MPPT) can better capture changes in lighting, and it can work even in rainy weather. It can maximize the capture and collection of sunlight. The inverter is compatible with a variety of conventional solar panels with an open circuit voltage of 2260V, and the panel can exert its best performance through technical means. The power output mode of us Micro-Inverter is reverse transmission technology, which supplies power to the load first, and then uploads the excess power to the local power grid. Its conversion efficiency is as high as 95%. The product has multiple national invention and appearance patents, And has CE, CEC, INMETOR and other regional and national product certification. Maximum power point tracking. Internal high precision meter. No installation, no maintenance. 11.5G lot platform management. Step 1: Fix the inverter on the bracket of the photovoltaic panel with the screws attached to the machine. Step 2: Connect the positive and negative poles of the DC connection plugs on the photovoltaic panel to the DC input terminals of the inverter. Step 3: Open the waterproof cover of the AC output connector of the inverter and connect the AC cable to the AC waterproof plug. Step 4: Connect the AC output line to the AC main cable. Step 5: Repeat steps 1 to 3 to install and connect all inverters. Step 6: Connect the AC main cable to the mains grid to start your green energy journey. Note: Before installing WVC series micro-inverter products, please read this manual first and pay attention to the installation details. This manual contains important instructions that should be followed when installing and maintaining Kadant Micro-inverters. In order to reduce. When reducing the risks of electric shock and ensuring safe installation and operation, always follow the following safety symbols present in this document to indicate dangerous situations and important safety instructions. 1 x Micro Inverter. 1 x English Manual. 2 x Accessory Kit (4 x Screw, 4 x Nut, 8 x Accessory). The biggest feature of the photovoltaic grid-connected system is that the DC power generated by the photovoltaic array is converted into AC power that meets the requirements of the commercial power grid through the grid-connected inverter, and then directly connected to the commercial power grid. The power generated by the panel array in the grid-connected system is preferentially supplied to the AC At the load side, excess power is fed back to the grid. On rainy days or nights, when the photovoltaic array does not generate electrical energy or the generated electrical energy cannot meet the load demand, it is powered by the grid. Because the electric energy is directly input into the power grid, the configuration of the storage battery is eliminated, the process of storage and release of the storage battery is eliminated, and the power generated by the PV square array can be fully utilized to reduce the energy loss and reduce the cost of the system. However, a dedicated grid-connected inverter is required in the system to ensure that the output power meets the requirements of the grid power for voltage, frequency and other indicators. Because of the inverter efficiency, there will still be some energy loss. Such systems are usually able to use the mains and solar photovoltaic arrays in parallel as the source of local AC loads. Reduce the load power shortage rate of the entire system. And the grid-connected PV system can play a peak-shaving effect on the public power grid. In response to the characteristics of the grid-connected system, we has developed the first generation of micro-grid inverters as early as 2008, specifically for the recycling of electrical energy of various profit and loss. Provides a preliminary route for our product development and design direction, and overcomes a series of technical problems on the grid-connected system. Until now the fifth generation WVC series R3 version of the inverter. Installation of micro inverter. Installation for fixed the inverter on the PV holder with the screws attached is as following. Connect the two DC terminal of the PV to the inverter, positive to positive, negative to negative. Open the waterproof cap on AC output side of the micro inverter, then plug to AC power line. Plug the AC output line to main AC cable. Repeat the first step to the third step to complete the installation of micro inverters. There may be some delays due to flight, holiday, weather, local post, local natural disaster impact. It must also be in the original packaging. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “audosta” and is located in this country: CN.
  • Color: WVC1600 WIFI 433MHZ
  • Input Voltage: 22V-60VDC
  • Output Voltage: 85-263VAC Auto Sense
  • Size: 430mm*375mm*115mm
  • Current Rating: Standard
  • Inverter Technology: Microinverter
  • Model: 4376975219
  • Country/Region of Manufacture: China
  • Function: Solar Inverter
  • Custom Bundle: No
  • Function 2: Grid Tie Inversor
  • Is Smart Device: Yes
  • Wattage: Standard
  • Current Type: DC
  • System Configuration: Grid-Tie
  • Product Line: Micro Inverter
  • Type: Micro Inverter
  • Features: Durable
  • MPN: 4376975241
  • Power: Standard
  • Current Output: Other
  • Brand: Unbranded
  • Application: Other
  • Charging Mode: Other
  • Output Power: 1 – 200KW
  • Output Type: Single
  • Single-Phase Grid Type: 85-280VAC Auto Sense
  • Version: R3-433 Smart IoT Micro Inverter
  • Wave form: Pure sine wave
  • Weight: 3.92kg
  • Category: Grid Tie inverter
  • Resistance Properties: Other
  • Voltage: Standard

MPPT Solar PV Grid Tie Micro Inverter Lot Monitoring System WiFi Data Terminal
Category: mppt | Comments Off