Grid Tie inverter With adjustable watt output

Grid tied inverter with adjustable watt output. Can be used with solar panels or 12 volt battery’s for night use. Has the capability to adjust the output wattage to ensure you don’t waste and dump unused energy into the grid. For example if your house is only using 300 watts at night you can turn a knob on the inverter to ensure the inverter only pulls 300 watts from batteries. Maximum output of inverter is 500watt. Other gird tied inverters do not have this adjustment function which makes this inverter unique. 500W Grid Tie Inverter Pure Sine Wave MPPT Micro Inverter for PV Panels Battery Discharge Adjustable. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “vicmart1197″ and is located in this country: US. This item can be shipped to United States.

System Configuration: Grid-Tie
Brand: Grid Tie Inverter
Application: Electronics

Category: grid | Comments Off

February 28

700W NEW Solar Grid Tie Micro Inverter Waterproof (IP65) WVC-700W

700W NEW Solar Grid Tie Micro Inverter Waterproof (IP65) WVC-700W. An inverter can efficiently turn the direct current generated by solar panels into the alternating current used by household appliances. This micro inverter makes it easier. Made of fine aluminum alloy, this IP65 waterproof inverter has a wide range of functions, good safety, convenient installation, and high-cost performance. We believe this inverter will not disappoint you. The inverter is made of aluminum alloy, which is durable, corrosion-resistant, and not easy to rust. You can use it for a long time without frequent replacement, and your cost can be saved. The inverter has built-in high-precision maximum power point tracking, which can optimize the power collection from the solar panel, accurately capture and lock the maximum output power point, and greatly increase power generation to more than 25%. In addition, the efficient power reverse transmission technology can transmit the power that can not be used up to the grid in the reverse direction to other places for use, and the power transmission rate can reach 99.9%. The inverter is equipped with an LCD display screen to monitor voltage, power, frequency, current, etc. So you can see the machine clearly in operation. The inverter adopts intelligent soft switching technology, high-frequency switching power supply technology, and 32-bit DSP full digital SPWM control technology, making the product strong anti-interference ability, fast operation speed, high intelligence, and a powerful functional system, which can meet the needs of users. The output and input of the system are completely electrically isolated, the insulation performance of the entire power distribution system is good, and the fully isolated booster circuit is safer and more reliable. The inverter has six protection functions: over-temperature protection, under-voltage alarm, under-voltage protection, over-voltage protection, short circuit protection, overload protection, etc. Besides, the IP65 waterproof design can prevent rain from eroding its surface, so you can use it with confidence. After the installation of the power station, you don’t need to do maintenance work. After a long period of use, you only need to remove the dust from the photovoltaic panel. With a size of 8.392.289.84inch, the inverter adopts high-frequency telephone, micro processing, and other technologies, so it is smaller, lighter, and won’t occupy too much space. During installation, you can stack multiple inverters at will, form a single-phase parallel stacking system, or conveniently form a three-phase system to provide a three-phase AC. We have been working hard to provide better service and quality for our customers, which is our goal. If there is any quality problem with our inverters. The inverter is equipped with two gaskets to help you install the photovoltaic support, making the inverter more stable. The inverter is provided with heat dissipation holes, which can play a good role in heat dissipation and prolong the service life of the inverter. This product is applicable to 30V or 36V solar panels, 36V batteries. The inverter can be widely used in residential or commercial areas for turning the direct current generated by solar panels into alternating current. Step 1: Install the inverter on the support of the photovoltaic panel with the screws provided by the machine. Step 2: Connect the positive and negative poles of the DC connection plug on the photovoltaic panel to the DC input terminal of the inverter. Step 3: Open the waterproof cover of the AC output interface of the inverter and connect the AC cable to the AC waterproof plug. Step 4: Connect the AC output cable to the AC main cable. Step 5: Repeat steps 1 to 3 to install and connect all inverters. Step 6: Connect the AC main cable to the public grid and start your green energy journey. Plug Type: US Standard. Maximum Input DC Voltage: 54V. Peak Power Tracking Voltage: 22-45V. Operating Voltage Range: 17-50V. Min/Max Start-up Voltage: 22-50V. Maximum DC Short Circuit Current: 40A. Maximum Input Operating Current: 30A. Output Peak Power: 700watt. Rated Output Power: 650watt. Rated Output Current: 6.36A. Rated Voltage Range: 80-160VAC. Rated Frequency Range: 57-62.5Hz. Number of Circuit Connections Per String: 6. Static MPPT Efficiency: 99.5%. Maximum Output Efficiency: 91.2%. Night Time Power Loss. Communication Mode: Power Line Carrier. Power Transmission Mode: Reverse Transmission, Load Priority. Gross Weight: 2.48kg/5.47lbs. Net Weight: 1.63kg/3.59lbs. Product Size: 21.35.825cm/8.392.289.84inch. Package Size: 342411.5cm/13.399.454.53inch. 1 Solar Grid Tie Micro Inverter. Other Accessories for Installation. Please install the inverter correctly according to the instructions. If you have any questions, please contact the relevant personnel. Please don’t dismantle the machine. Only qualified maintenance personnel can repair the inverter. Please install the inverter in a place with low humidity and good ventilation to avoid overheating the inverter and remove the surrounding inflammable and explosives. When using this inverter, please take good care of your children to prevent them from touching and playing to avoid electric shock. Please note that our products are grid-connected, the AC output port has to be connected to the home grid in order to achieve grid-connected power generation. When the input load is with solar panels, it is important that the VOC voltage is between 30-48V. We recommend that the solar panel is configured for 20% more power than the power of the product. For example, if the product is 600W, the total power of the solar panels should be between 700-750W. When the input load is a battery, we recommend a battery voltage of 36V, which can be connected in series with 3 12V batteries. Please note that the positive and negative polarity should not be reversed when connecting the product. The recommended battery current is 36V/10mah for 300W, 36V/20mah for 600W, and 36V/40-45mah for 1200W. The input and output voltage of the configuration is within the normal operating voltage range of the product in order for the product to work properly and achieve grid-connected power generation. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement. Please make sure you do not mind before you order. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. Applicable to 30V or 36V solar panels, 36V batteries. LCD Display, Digital Control, Electrical Isolation, Safety Guard, Flexible Installation Mode, Small Footprint. Maximum Input DC Voltage. Peak Power Tracking Voltage. Maximum DC Short Circuit Current. Maximum Input Operating Current. Number of Circuit Connections Per String. Reverse Transmission, Load Priority. 21.35.825cm/8.392.289.84inch. Solar Grid Tie Micro Inverter. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “besttool888″ and is located in this country: US. This item can be shipped to United States.

Application: Applicable to 30V or 36V solar panels, 36V batteries
Current Output: /
Current Type: /
System Configuration: /
Current Rating: /
Features: LCD Display, Digital Control, Electrical Isolation, Safety Guard, Flexible Installation Mode, Small Footprint:
Charging Mode: /
Resistance Properties: /
Model: WVC-700W
Color: Silver
Material: Aluminium Alloy
Power: 700W
Voltage: 110V
Plug Type: US Standard
Maximum Input DC Voltage: 54V
Peak Power Tracking Voltage: 22-45V
Operating Voltage Range: 17-50V
Min/Max Start-up Voltage: 22-50V
Maximum DC Short Circuit Current: 40A
Maximum Input Operating Current: 30A
Output Peak Power: 700watt
Rated Output Power: 650watt
Rated Output Current: 6.36A
Rated Voltage Range: 80-160VAC
Rated Frequency Range: 57-62.5Hz
Power Factor: ＞99%
Number of Circuit Connections Per String: 6
Static MPPT Efficiency: 99.5%
Maximum Output Efficiency: 91.2%
Night Time Power Loss: <1W
Total Flow Distortion: <5%
Operating Temperature Range: ﹣40℃~60℃/﹣40℉~140℉
Waterproof Rating: IP65
Cooling Method: Self-cooling
Communication Mode: Power Line Carrier
Power Transmission Mode: Reverse Transmission, Load Priority
Product Size: 21.3*5.8*25cm/8.39*2.28*9.84inch
Brand: Unbranded
Type: Solar Grid Tie Micro Inverter

Category: 700w | Comments Off

February 27

700w Solar Grid Tie Micro Inverter For 30v Or 36v Solar Panels Waterproof Ip65

700W SOLAR GRID TIE MICRO INVERTER FOR 30V OR 36V SOLAR PANELS WATERPROOF IP65. An inverter can efficiently turn the direct current generated by solar panels into the alternating current used by household appliances. This micro inverter makes it easier. Made of fine aluminum alloy, this IP65 waterproof inverter has a wide range of functions, good safety, convenient installation, and high-cost performance. We believe this inverter will not disappoint you. The inverter is made of aluminum alloy, which is durable, corrosion-resistant, and not easy to rust. You can use it for a long time without frequent replacement, and your cost can be saved. The inverter has built-in high-precision maximum power point tracking, which can optimize the power collection from the solar panel, accurately capture and lock the maximum output power point, and greatly increase power generation to more than 25%. In addition, the efficient power reverse transmission technology can transmit the power that can not be used up to the grid in the reverse direction to other places for use, and the power transmission rate can reach 99.9%. The inverter is equipped with an LCD display screen to monitor voltage, power, frequency, current, etc. So you can see the machine clearly in operation. The inverter adopts intelligent soft switching technology, high-frequency switching power supply technology, and 32-bit DSP full digital SPWM control technology, making the product strong anti-interference ability, fast operation speed, high intelligence, and a powerful functional system, which can meet the needs of users. The output and input of the system are completely electrically isolated, the insulation performance of the entire power distribution system is good, and the fully isolated booster circuit is safer and more reliable. The inverter has six protection functions: over-temperature protection, under-voltage alarm, under-voltage protection, over-voltage protection, short circuit protection, overload protection, etc. Besides, the IP65 waterproof design can prevent rain from eroding its surface, so you can use it with confidence. After the installation of the power station, you don’t need to do maintenance work. After a long period of use, you only need to remove the dust from the photovoltaic panel. With a size of 8.392.289.84inch, the inverter adopts high-frequency telephone, micro processing, and other technologies, so it is smaller, lighter, and won’t occupy too much space. During installation, you can stack multiple inverters at will, form a single-phase parallel stacking system, or conveniently form a three-phase system to provide a three-phase AC. We have been working hard to provide better service and quality for our customers, which is our goal. If there is any quality problem with our inverters. The inverter is equipped with two gaskets to help you install the photovoltaic support, making the inverter more stable. The inverter is provided with heat dissipation holes, which can play a good role in heat dissipation and prolong the service life of the inverter. This product is applicable to 30V or 36V solar panels, 36V batteries. The inverter can be widely used in residential or commercial areas for turning the direct current generated by solar panels into alternating current. Step 1: Install the inverter on the support of the photovoltaic panel with the screws provided by the machine. Step 2: Connect the positive and negative poles of the DC connection plug on the photovoltaic panel to the DC input terminal of the inverter. Step 3: Open the waterproof cover of the AC output interface of the inverter and connect the AC cable to the AC waterproof plug. Step 4: Connect the AC output cable to the AC main cable. Step 5: Repeat steps 1 to 3 to install and connect all inverters. Step 6: Connect the AC main cable to the public grid and start your green energy journey. Plug Type: US Standard. Maximum Input DC Voltage: 54V. Peak Power Tracking Voltage: 22-45V. Operating Voltage Range: 17-50V. Min/Max Start-up Voltage: 22-50V. Maximum DC Short Circuit Current: 40A. Maximum Input Operating Current: 30A. Output Peak Power: 700watt. Rated Output Power: 650watt. Rated Output Current: 6.36A. Rated Voltage Range: 80-160VAC. Rated Frequency Range: 57-62.5Hz. Number of Circuit Connections Per String: 6. Static MPPT Efficiency: 99.5%. Maximum Output Efficiency: 91.2%. Night Time Power Loss. Communication Mode: Power Line Carrier. Power Transmission Mode: Reverse Transmission, Load Priority. Gross Weight: 2.48kg/5.47lbs. Net Weight: 1.63kg/3.59lbs. Product Size: 21.35.825cm/8.392.289.84inch. Package Size: 342411.5cm/13.399.454.53inch. 1 Solar Grid Tie Micro Inverter. Other Accessories for Installation. Please install the inverter correctly according to the instructions. If you have any questions, please contact the relevant personnel. Please don’t dismantle the machine. Only qualified maintenance personnel can repair the inverter. Please install the inverter in a place with low humidity and good ventilation to avoid overheating the inverter and remove the surrounding inflammable and explosives. When using this inverter, please take good care of your children to prevent them from touching and playing to avoid electric shock. Please note that our products are grid-connected, the AC output port has to be connected to the home grid in order to achieve grid-connected power generation. When the input load is with solar panels, it is important that the VOC voltage is between 30-48V. We recommend that the solar panel is configured for 20% more power than the power of the product. For example, if the product is 600W, the total power of the solar panels should be between 700-750W. When the input load is a battery, we recommend a battery voltage of 36V, which can be connected in series with 3 12V batteries. Please note that the positive and negative polarity should not be reversed when connecting the product. The recommended battery current is 36V/10mah for 300W, 36V/20mah for 600W, and 36V/40-45mah for 1200W. The input and output voltage of the configuration is within the normal operating voltage range of the product in order for the product to work properly and achieve grid-connected power generation. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement. Please make sure you do not mind before you order. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. Applicable to 30V or 36V solar panels, 36V batteries. LCD Display, Digital Control, Electrical Isolation, Safety Guard, Flexible Installation Mode, Small Footprint. Maximum Input DC Voltage. Peak Power Tracking Voltage. Maximum DC Short Circuit Current. Maximum Input Operating Current. Number of Circuit Connections Per String. Reverse Transmission, Load Priority. 21.35.825cm/8.392.289.84inch. Solar Grid Tie Micro Inverter. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “autopartstop666″ and is located in this country: US. This item can be shipped to United States.

Application: Applicable to 30V or 36V solar panels, 36V batteries
Current Output: /
Current Type: /
System Configuration: /
Current Rating: /
Features: LCD Display, Digital Control, Electrical Isolation, Safety Guard, Flexible Installation Mode, Small Footprint:
Charging Mode: /
Resistance Properties: /
Model: WVC-700W
Color: Silver
Material: Aluminium Alloy
Power: 700W
Voltage: 110V
Plug Type: US Standard
Maximum Input DC Voltage: 54V
Peak Power Tracking Voltage: 22-45V
Operating Voltage Range: 17-50V
Min/Max Start-up Voltage: 22-50V
Maximum DC Short Circuit Current: 40A
Maximum Input Operating Current: 30A
Output Peak Power: 700watt
Rated Output Power: 650watt
Rated Output Current: 6.36A
Rated Voltage Range: 80-160VAC
Rated Frequency Range: 57-62.5Hz
Power Factor: ＞99%
Number of Circuit Connections Per String: 6
Static MPPT Efficiency: 99.5%
Maximum Output Efficiency: 91.2%
Night Time Power Loss: <1W
Total Flow Distortion: <5%
Operating Temperature Range: ﹣40℃~60℃/﹣40℉~140℉
Waterproof Rating: IP65
Cooling Method: Self-cooling
Communication Mode: Power Line Carrier
Power Transmission Mode: Reverse Transmission, Load Priority
Product Size: 21.3*5.8*25cm/8.39*2.28*9.84inch
Brand: Unbranded
Type: Solar Grid Tie Micro Inverter

Category: 700w | Comments Off

February 27

The Sol Ark 15k Delivers As Promised

Category: delivers | Comments Off

February 26

600W MPPT Waterproof Solar Grid Tie Inverter DC to AC Micro Inverter (600w)

600W MPPT Waterproof Solar Grid Tie Inverter DC to AC Micro Inverter (600w). By converting the direct current generated by the solar panels into alternating current for domestic appliances, the inverter provides an environmentally friendly and economical source of continuous energy. The high-quality aluminum housing provides a high level of protection, ensuring stable operation and long service life. Its powerful performance and high safety level make it the ideal choice for most homes. 6-stage Power Search: The inverter automatically switches on the 6-stage power search function when the output current of the solar cells is extremely low on cloudy days, enabling a constant, stable and efficient power output at low power levels, which greatly increases the power generation capacity of the system. Direct Use: It uses solar power directly, so you can simply connect the solar panels directly to the grid-connected inverter to get AC power without having to connect the batteries, which is convenient and energy efficient. High Performance: It has a powerful MPPT (Maximum Power Point Tracking) algorithm and APL function to optimize the power collection from the solar panels while making the output power more stable. It accurately captures and locks in the maximum output power point even under fluctuations in current intensity, resulting in a significant increase in power generation to greater than 25%. Multiple Protection Functions: It provides six protection functions, over temperature protection, under voltage alarm, under voltage protection, over voltage protection, short circuit protection and overload protection functions, so you can use it with confidence. Reliable Circuit System: The product has a constant current and output power, and features galvanic isolation technology to provide a fully isolated boost circuit, making the circuit safe and reliable. In addition, the output is automatically switched off when there is an obstruction in the main network. Stackable Installation : To achieve higher power requirements, it allows multiple inverters to be stacked at will to form a single-phase parallel stacking system, or it can be easily formed into a three-phase system to provide three-phase AC power. Digital Control: It adopts 32-bit DSP fully digital SPWM control technology, featuring strong anti-interference capability, fast computing speed and high intelligence to improve control accuracy and output waveform quality. Simple Maintenance&Installation : It can be directly installed on the back of the module or the bracket. After installation, it is easy to maintain. You only need to remove the dust after a long time. Robust and Durable: The housing is made of high-quality aluminum alloy, which is robust, wear-resistant, rust-proof and impact-resistant, effectively protecting the internal components and extending their service life. Reverse Power Transmission: The power is transmitted in the reverse direction when in grid-connected output mode, automatically detecting the load in the circuit and giving priority to its use, making the output more efficient in photovoltaic power generation application systems. Customer Service: We aim to provide quality products and services. We will reply and solve the problem for you as soon as possible. Waterproof Cover: The AC and DC interface are equipped with a waterproof cover to prevent dust and water from entering when not in use for a longer service life. The cover and the interface are connected together to prevent loss. LED Indicator : The LED indicator on the body allows you to control its operating status through different flashing conditions. This product is applicable to 30V or 36V solar panels, 36V batteries. It can be used in residential and small commercial environments. It is suitable for various household appliances. Step 1: Install the inverter on the support of the photovoltaic panel with the screws provided by the machine. Step 2: Connect the positive and negative poles of the DC connection plug on the photovoltaic panel to the DC input terminal of the inverter. Step 3: Open the waterproof cover of the AC output interface of the inverter and connect the AC cable to the AC waterproof plug. Step 4: Connect the AC output cable to the AC main cable. Step 5: Repeat steps 1 to 3 to install and connect all inverters. Step 6: Connect the AC main cable to the public grid and start your green energy journey. Power Source: Solar Powered. Maximum Input Power: 600Watt. Recommend the Use of PV Modules: 2x300W & Vmp>30V & Voc. Maximum Input DC Voltage: 54V. Peak Power Tracking Voltage: 22-45V. Operating Voltage Range: 17- 50V. Min/Max Starting Voltage: 22- 50V. Maximum DC Short-circuit: 40A. Maximum Input Operating Current: 27.2A. Peak Power Output: 600Watt. Rated Output Power: 550Watt. Rated Output Current: 4.58A. Rated Voltage Range: 80-160VAC. Rated Frequency Range: 57-62.5Hz. Max Unit Per Branch Circuit: 6pcs (Single-phase). Static MPPT Efficiency: 99.5%. Maximum Output Efficiency: 91.2%. Night Time Power Consumption. Ambient Temperature Range: -40°C to + 60°C. Packing Size: 32229.5cm/12.598.663.74in. Product Size: 21.35.825cm/8.392.289.84in. Gross Weight: 2.45kg/5.4lbs. Net Weight: 1.6kg/3.52lbs. 1 AC Connection Cable. 1 English User Notice Manual. 1 Chinese English Integrated Instruction. Other Accessories for Installation. Please read the operating manual completely before use. And pay particular attention to the safety instructions included. If using solar PV panels, it is important that the VOC voltage is between 30-48V and it is recommended that the solar panel configuration is >20% of the product’s power. For example, if the product is 600W, then the total power of the solar panel should be between 700-750W. If the input load is a battery, it is recommended that the battery voltage is 36V, or 3 12V batteries can be connected in series. Please note that when connecting the product, the positive and negative polarity should not be reversed. The input and output voltage of the configuration is within the normal operating voltage range of the product in order for the product to work properly and achieve grid-connected power generation. Please do not dismantle the inverter by non-specialists, only qualified service personnel should repair this product. Please install the inverter in a place with low humidity, good ventilation and cool places to avoid overheating the inverter and remove flammable and explosive materials from the surrounding area. When using this product, avoid children touching and playing with it to avoid electric shock. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before you order. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “zhuliyun-2″ and is located in this country: US. This item can be shipped to United States, Canada.

Brand: Unbranded
Material: Aluminum Alloy
Color: Silver
Power Source: Solar Powered
Maximum Input Power: 600Watt
Recommend the Use of PV Modules: 2x300W & Vmp>30V & Voc<50V
Maximum Input DC Voltage: 54V
Peak Power Tracking Voltage: 22-45V
Operating Voltage Range: 17- 50V
Min/Max Starting Voltage: 22- 50V
Maximum DC Short-circuit: 40A
Maximum Input Operating Current: 27.2A
Peak Power Output: 600Watt
Rated Output Power: 550Watt
Rated Output Current: 4.58A
Rated Voltage Range: 80-160VAC
Rated Frequency Range: 57-62.5Hz
Power Factor: >99%
Max Unit Per Branch Circuit: 6pcs (Single-phase)
Output Efficiency: @120V
Static MPPT Efficiency: 99.5%
Maximum Output Efficiency: 91.2%
Night Time Power Consumption: < 1W
THD: < 5%
Ambient Temperature Range: -40°C to + 60°C
Waterproof Rating: IP65
Cooling: Self-cooling
Packing Size: 32*22*9.5cm/12.59*8.66*3.74in
Product Size: 21.3*5.8*25cm/8.39*2.28*9.84in
Gross Weight: 2.45kg/5.4lbs
Net Weight: 1.6kg/3.52lbs

Category: 600w | Comments Off

February 26

700W Smart Micro Inverter for Balcony Power Plant Solar Grid Tie Inverter 120V

Specification Material: Aluminum Alloy Color: Silver Model: XJ-WVC-700W Plug: US Standard Voltage: 110V Maximum Input Power: 2 × 350W Recommended Solar Panel: Power 2 × 350W, Open Circuit Voltage 30-50V Maximum Input DC Voltage: 54V Peak Power Tracking Voltage: 22-45V Operating Voltage Range: 17-50V Minimum/Maximum Starting Voltage: 22-50V Maximum DC Short Circuit Current: 40A Maximum Input Working Current: 30A Output Voltage: 120V Output Peak Power: 700W Rated Output Power: 650Watt Rated Output Current: 6.36A Rated Voltage Range: 80-160VAC Rated Frequency Range: 57-62.5Hz Power factor: >99% Number of Connections Per Series Circuit: 6 (Single-phase) Output Efficiency: 120V Static MPPT Efficiency: 99.5% Maximum Output Efficiency: 91.2% Power Loss at Night. 700W Smart Micro Inverter for Balcony Power Plant Solar Grid Tie Inverter 120V. Solar Micro Inverter 700W Grid Tie MPPT Pure Sine Wave DC 22-50V to AC 120V Waterproof IP65. Maximum Input Power: 2 × 350W. Recommended Solar Panel: Power 2 × 350W, Open Circuit Voltage 30-50V. Maximum Input DC Voltage: 54V. Peak Power Tracking Voltage: 22-45V. Operating Voltage Range: 17-50V. Minimum/Maximum Starting Voltage: 22-50V. Maximum DC Short Circuit Current: 40A. Maximum Input Working Current: 30A. Output Peak Power: 700W. Rated Output Power: 650Watt. Rated Output Current: 6.36A. Rated Voltage Range: 80-160VAC. Rated Frequency Range: 57-62.5Hz. Number of Connections Per Series Circuit: 6 (Single-phase). Static MPPT Efficiency: 99.5%. Maximum Output Efficiency: 91.2%. Power Loss at Night. Operating Temperature Range: – 40? Heat Dissipation Mode: Self Cooling. Power Grid Disturbance: EN61000-3-2 Safety Regulation EN62109. Grid Detection: DIN VDE 1026 UL1741. Gross Weight: 2.45kg/5.4lbs. Net Weight: 1.8kg/3.96lbs. Package Size: 342411.5cm/13.389.444.52in. Product Size: 21.35.825cm/8.392.289.84in. With a powerful MPPT algorithm and a 99.9% efficient transmission rate, this solar inverter can greatly improve conversion efficiency while providing stable AC power for home appliances. With high-quality materials and multiple protection features, this solar inverter can serve you for a long time. The product’s built-in MPPT Max. Power Point Tracking optimizes power collection from the solar panel and precisely captures and locks the maximum output power point to significantly increase power generation to more than 25%. The 99.9% efficient reverse power transmission technology transmits the power in the reverse direction in grid-connected output mode while automatically detecting the load in the circuit and prioritizing its use, which greatly improves transmission efficiency. Pure Positive Sine Wave. The product uses SPWM to directly generate a pure positive sine wave with good waveform, low distortion, and low noise to make the radio and other communication devices feel better. The inverter dial fast using high-frequency switching power supply technology and 32-bit DSP fully digital SPWM control technology provides the product with excellent. Capability, high-speed computing capability, and intelligence. Grid-connected and Off-grid Stacking Mode. Inverters can be stacked in parallel with any number of units for both grid-connected and off-grid use. After the main monitoring system sends the main control signal the inverter receives the main control signal for synchronous output. The whole power distribution system is well insulated and the output of the system is completely electrically isolated from the input, which makes the use safer and more reliable. Over-temperature protection, under-voltage alarm, under-voltage protection, over-voltage protection, short-circuit protection, and overload protection protect the safety of use in all aspects. Multiple inverters can be stacked arbitrarily, forming a single-phase parallel stacking system or a three-phase system to provide three-phase AC power conveniently. Flexible installation allows for a wider range of applications. The power station only needs to clean the. On the PV panel regularly after installation, which makes it very convenient and quick. The upgraded miniature design makes the product size only 8.392.289.84 inches and net weight only 3.96 pounds, which makes it easy to carry and install. The solar inverter is made of high-quality aluminum alloy, which is very strong, durable, and. To be able to serve you for a long time. High-quality material and stable structure bring the product IP65 excellent. Performance so that it can effectively group the influence of. And water, and can operate stably outdoors. We aim to provide quality products and services. We will reply and solve the problem for you as soon as possible. Rounded and smooth corners can protect hands from scratches for easy installation and portability. Clear LED Display Lamp. Clear LED display lamp allows you to easily understand the status of the product for operation. This solar inverter is mainly used for power stations, schools, and home grid connections. Step 1: Install the inverter on the bracket of the photovoltaic panel with the screws. Step 2: Connect the positive and negative poles of the DC connection plug on the photovoltaic board to the DC input terminal of the inverter. Step 3: Open the. Cover of the AC output connector of the inverter and connect the AC cable to the AC. Step 4: Connect the AC output cable to the AC main cable. Step 5: Repeat steps 1 to 3, install and connect all inverters. Step 6: Connect the AC main cable to the utility grid to start your green energy journey. 1English User Notes Manual. All Accessories Needed for Installation. Please correctly install the inverter according to the instructions. If you have any questions, please contact the relevant personnel. T allowed to disassemble the machine. Only qualified maintenance personnel can repair the product. Please install the inverter in a place with low humidity and good ventilation to avoid overheating of the inverter, and remove flammable and explosive materials around. When using this product, children should not touch or play to avoid electric shock. Connect the solar panel and the DC input of the battery DC power supply cable. Our product is grid-connected power generation. The AC output port must be connected to the home grid to achieve grid-connected power generation. When using solar photovoltaic panels, the VOC voltage must be between 30-48V. It is recommended that the power configured for the solar panel be greater than 20% of the product power. When using the battery, it is recommended that the battery voltage be 36V, and three 12V batteries can be connected in series. When connecting the product, the positive and negative polarity shall not be reversed. For 300W products, the recommended parameter of the battery is 36V/10mah. For 600W products, it is recommended that the battery parameter be 36V/20mah. 1200W product: it is recommended that the battery parameter be 36V/40-45mah. The customer’s configuration parameters, input, and output voltages are within the normal voltage range of the product so that the product can work normally and realize grid-connected power generation. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement. Please make sure you do not mind before you order. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. Reverse Power Transmission, Pure Sine Wave, High-quality Material. Power 2 × 350W. Maximum Input DC Voltage. Peak Power Tracking Voltage. Maximum DC Short Circuit Current. Maximum Input Operating Current. Number of Circuit Connections Per String. Night Time Power Loss. EN61000-3-2 Safety Regulation EN62109. DIN VDE 1026 UL1741. 21.35.825cm/8.392.289.84in. 342411.5cm/13.389.444.52in. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “balalastore8″ and is located in this country: US. This item can be shipped to United States.

Features: Reverse Power Transmission，Pure Sine Wave，High-quality Material
Brand: Unbranded
Color: Silver
Power Source: Solar
Type: Charger/Inverter
Model: XJ-WVC-700W
Application: Home/Garden
Voltage: 110V
Power: 700W
Current Rating: 22-50V
Current Type: DC
Resistance Properties: Waterproof
Current Output: 120V
Material: Aluminium Alloy
Plug Type: US Standard
Recommended Solar Panel: Power 2 × 350W
Maximum Input DC Voltage: 54V
Peak Power Tracking Voltage: 22-45V
Min/Max Start-up Voltage: 22-50V
Maximum DC Short Circuit Current: 40A
Maximum Input Operating Current: 30A
Output Peak Power: 700W
Rated Output Power: 650Watt
Rated Output Current: 6.36A
Rated Voltage Range: 80-160VAC
Rated Frequency Range: 57-62.5Hz
Power Factor: ＞99％
Number of Circuit Connections Per String: 6 (Single-phase)
Static MPPT Efficiency: 99.5%
Maximum Output Efficiency: 91.2%
Night Time Power Loss: <1W
Total Flow Distortion: <5%
Operating Temperature Range: – 40 ℃ to+60 ℃
Waterproof Rating: IP65
Cooling Method: Self-cooling
Electromagnetic Compatibility: EN50081.Part1 EN50082.Part1
Power Grid Disturbance: EN61000-3-2 Safety Regulation EN62109
Grid Detection: DIN VDE 1026 UL1741
Net Weight: 1.8kg/3.96lbs
Gross Weight: 2.45kg/5.4lbs
Product Size: 21.3*5.8*25cm/8.39*2.28*9.84in
Package Size: 34*24*11.5cm/13.38*9.44*4.52in

Category: 700w | Comments Off

February 25

Smart Inverter Solar Inverter Grid Tie Monitoring Durable Fittings New Inverte

Smart Inverter Solar Inverter Grid Tie Monitoring Durable Fittings New Inverte. Safe to use: The inverter can control each component independently of each other, minimising potential safety risks and preventing accidents. The inverter can be installed directly behind the module or on a bracket to simplify user maintenance. Wireless operation: You can remotely control and monitor via WiFi or a mobile app, performance, efficiency and income are visible at a glance High accuracy: can be operated and monitored via WiFi or mobile app, which is convenient to use and significantly improves overall work efficiency. The solar inverter has a high-precision instrument built-in, you can see the working status of each component, which is efficient and durable Built-in solar charge controller with MPPT (Maximum Power Point Tracking). Built-in high speed UPS switching controller. Fully isolated booster circuit, safer and more reliable to use. High frequency, high frequency processing, miniaturization, smaller size and lighter. High performance MOSFET fast driver, higher output efficiency Matters needing attention. Use photovoltaic panel(s) ONLY connect to this equipment. This equipment is ON-GRID Microinverter, To make it work properly, it must be connected to the power grid correctly, and the power grid is working properly, When the power grid stopped working, it will also stop generating. Do NOT exceed PV panel(s) voltage over the inverter max input voltage. Do NOT exceed PV panel(s) power over the inverter max input power. DC voltage sources are pass through this equipment. Each circuit must be individually disconnected before servicing. Do NOT cover other items on this equipment. Do NOT remove the lid. Servicing must be performed by qualified service personnel. When PV array is exposed to light, it supples DC voltage to this equipment. Install away from direct sunlight and direct rain exposure. Please kindly note that. Also, the each additional item means. The the same color and size. Transit time may be a little delayed because of the. If you have any questions. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “bestbuy_outlets” and is located in this country: CN. This item can be shipped to United States.

Brand: Unbranded
Type: inverter
Power: 800W
Package Contents: 1Pc inverter 1Set screws 1Pc User Manual（English） 1Set Plug

Category: smart | Comments Off

February 24

1200W Solar Grid Tie Inverter Waterproof IP65 DC 17-50V Pure Sine Wave Inverter

1200W Solar Grid Tie Inverter Waterproof IP65 DC 17-50V Pure Sine Wave Inverter. Plug Type: US Standard. Maximum Input DC Voltage: 54V. Peak Power Tracking Voltage: 22-45V. Operating Voltage Range: 17-50V. Min/Max Start-up Voltage: 22-50VDC. Maximum DC Short Circuit Current: 80A. Maximum Input Operating Current: 54.4A. Peak Power Output: 1200watt. Rated Output Power: 1150watt. Rated Output Current: 9.58A. Rated Voltage Range: 80-160VAC. Rated Frequency Range: 57-62.5Hz. Max Unit Per Branch Circut: 3pcs(Single-phase). Static MPPT Efficiency: 99.5%. Maximum Output Efficiency: 91.2%. Night Time Power Loss. Communication Mode: Power Line Carrier. Power Transmission Mode: Reverse Transmission, Load Priority. Gross Weight: 4.08kg/8.99lbs. Net Weight: 2.88kg/6.35lbs. Product Size: 2137.44cm/8.2714.721.57inch. Package Size: 47.53411.5cm/18.713.394.53inch. An inverter can efficiently turn the direct current generated by solar panels into the alternating current used by household appliances. This micro inverter makes it easier. Made of fine aluminum alloy, this IP65. Inverter has a wide range of functions, good safety, convenient installation, and high-cost performance. We believe this inverter will not disappoint you. Premium Material: The inverter is made of aluminum alloy, which is durable. And not easy to rust. You can use it for a long time without frequent replacement, and your cost can be saved. High Efficiency: The inverter has built-in high-precision maximum power point tracking, which can optimize the power collection from the solar panel, accurately capture and lock the maximum output power point, and greatly increase power generation to more than 25%. In addition, the efficient power reverse transmission technology can transmit the power that can not be used up to the grid in the reverse direction to other places for use, and the power transmission rate can reach 99.9%. LCD Display: The inverter is equipped with an LCD display screen to monitor voltage, power, frequency, current, etc. So you can see the machine clearly in operation. Digital Control: The inverter adopts intelligent soft switching technology, high-frequency switching power supply technology, and 32-bit DSP full digital SPWM control technology, making the product strong. Ability, fast operation speed, high intelligence, and a powerful functional system, which can meet the needs of users. Electrical Isolation: The output and input of the system are completely electrically isolated, the insulation performance of the entire power distribution system is good, and the fully isolated booster circuit is safer and more reliable. Safety Guard: The inverter has six protection functions: over-temperature protection, under-voltage alarm, under-voltage protection, over-voltage protection, short circuit protection, overload protection, etc. Design can prevent rain from eroding its surface, so you can use it with confidence. Easy Maintenance: After the installation of the power station, you don’t need to do maintenance work. After a long time, you only need to remove the dust on the photovoltaic panel. Small Footprint: With a size of. 8.2714.721.57inch. The inverter adopts high-frequency telephone, micro processing, and other technologies, so it is smaller, lighter, and won’t occupy too much space. Flexible Installation Mode: During installation, you can stack multiple inverters at will, form a single-phase parallel stacking system, or conveniently form a three-phase system to provide a three-phase AC. Service: We have been working hard to provide better service and quality for our customers, which is our goal. If there is any quality problem with our inverters. Gasket: The inverter is equipped with two gaskets to help you install the photovoltaic support, making the inverter more stable. Heat Dissipation Holes: The inverter is provided with heat dissipation holes, which can play a good role in heat dissipation and prolong the service life of the inverter. This product is applicable to 30V or 36V solar panels, 36V batteries. The inverter can be widely used in residential or commercial areas for turning the direct current generated by solar panels into alternating current. Step 1: Install the inverter on the support of the photovoltaic panel with the screws provided by the machine. Step 2: Connect the positive and negative poles of the DC connection plug on the photovoltaic panel to the DC input terminal of the inverter. Step 3: Open the waterproof cover of the AC output interface of the inverter and connect the AC cable to the AC waterproof plug. Step 4: Connect the AC output cable to the AC main cable. Step 5: Repeat steps 1 to 3 to install and connect all inverters. Step 6: Connect the AC main cable to the public grid and start your green energy journey. Other Accessories for Installation. Please install the inverter correctly according to the instructions. If you have any questions, please contact the relevant personnel. Please don’t dismantle the machine. Only qualified maintenance personnel can repair the inverter. Please install the inverter in a place with low humidity and good ventilation to avoid overheating the inverter and remove the surrounding inflammable and explosives. When using this inverter, please take good care of your children to prevent them from touching and playing to avoid electric shock. Please note that our products are grid-connected, the AC output port has to be connected to the home grid in order to achieve grid-connected power generation. When the input load is with solar panels, it is important that the VOC voltage is between 30-48V. We recommend that the solar panel is configured for 20% more power than the power of the product. For example, if the product is 600W, the total power of the solar panels should be between 700-750W. When the input load is a battery, we recommend a battery voltage of 36V, which can be connected in series with 3 12V batteries. Please note that the positive and negative polarity should not be reversed when connecting the product. The recommended battery current is 36V/10mah for 300W, 36V/20mah for 600W, and 36V/40-45mah for 1200W. The input and output voltage of the configuration is within the normal operating voltage range of the product in order for the product to work properly and achieve grid-connected power generation. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement. Please make sure you do not mind before you order. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. LCD Display, Corrosion Resistant. MPPT (Maximum Power Point Tracking). Maximum Input DC Voltage. Peak Power Tracking Voltage. Maximum DC Short Circuit Current. Maximum Input Operating Current. Max Unit Per Branch Circut. Reverse Transmission, Load Priority. 2137.44cm/8.2714.721.57inch. 47.53411.5cm/18.713.394.53inch. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “most-tool-shop” and is located in this country: US. This item can be shipped to United States.

Current Output: /
Type: Solar Panel Kit
Features: LCD Display, Corrosion Resistant
Brand: Unbranded
Application: Home/Garden
Resistance Properties: Waterproof
Country/Region of Manufacture: Unknown
Current Type: DC
System Configuration: Grid-Tie
Power Source: Solar
Charging Mode: MPPT (Maximum Power Point Tracking)
Model: WVC-1200W
Color: Blue
Material: Aluminium Alloy
Power: 1200W
Voltage: 110V
Plug Type: US Standard
Maximum Input DC Voltage: 54V
Peak Power Tracking Voltage: 22-45V
Operating Voltage Range: 17-50V
Min/Max Start-up Voltage: 22-50VDC
Maximum DC Short Circuit Current: 80A
Maximum Input Operating Current: 54.4A
Peak Power Output: 1200watt
Rated Output Power: 1150watt
Rated Output Current: 9.58A
Rated Voltage Range: 80-160VAC
Rated Frequency Range: 57-62.5Hz
Power Factor: ＞99％
Max Unit Per Branch Circut: 3pcs(Single-phase)
Static MPPT Efficiency: 99.5%
Maximum Output Efficiency: 91.2%
Night Time Power Loss: <1W
Total Flow Distortion: <5%
Ambient Temperature Range: ﹣40℃~60℃/﹣40℉~140℉
Waterproof Rating: IP65
Cooling Method: Self-cooling
Communication Mode: Power Line Carrier
Power Transmission Mode: Reverse Transmission, Load Priority
Gross Weight: 4.08kg/8.99lbs
Net Weight: 2.88kg/6.35lbs
Product Size: 21*37.4*4cm/8.27*14.72*1.57inch
Package Size: 47.5*34*11.5cm/18.7*13.39*4.53inch

Category: 1200w | Comments Off

February 24

KRXNY 1000W Grid Tie Inverter 20-45V DC Input 110V AC Output Stackable MPPT P

Brand New KRXNY 1000W Grid Tie Inverter 20-45V DC Input 110V AC Output Stackable MPPT Pure Sine Wave Solar Power for 24V 30V 36V Solar Panel. Unique circuit design, choice of import industrial electronic components, higher efficiency, more stable performance. Each time you move the inverter, tighten the DC connection terminals. Avoid short circuit of DC terminal due to loose connection. Creative MPPT technology, efficiency more than 90%Please do not use other voltage input, for example: (20V) or(45V) Please use 200W-1000W solar panel (Voc36-46V). Parallel type design for DC input and modularization design for inverter, small volume, distributed installation, easy for system configuration, flexible for combination, strong expansibility of system. Aluminum alloy housing, not rust, heat-resisting and cold-resistant as well as anti-corrosion. Getting electronic circuit design, appearance design and other core technology patents. Perfect electrical protection function. Remind : 1This grid tie inverter cannot be used as off grid/stand alone solar system. 2The output need to be connected to the grid power. Can not supply power directly to the AC loads. 3The solar panels which used with this inverter must be the same specification. Details : Grid tie inverter is a device which directly converts direct current into alternating current which sine wave, frequency and phase are same as power grid and then feed into utility grid. It is a key device of power generation systems such as PV power generation system. Smart Microinverter specially optimized design to work with modularization of DC power supplies which includes the mainstream solar modules, 18V (36 cells), 24V (60 cells) and 36V (72 cells) monocrystal and/or Polycrystalline solar panels. Smart Microinverters are stabilization, reliable and high conversion efficiency items. It is best choice for PV power generation systems. Smart Microinverter can be easily placed and attached to the rack underneath of PV module. No need spaces for independent installation and low voltage DC wire connects from the PV module to Smart Microinverter can eliminate the risk of high DC voltage. Distributed modularization design philosophy for Smart Microinverterl insures the productiveness of the whole system and will not affect by a single point of failure. Each Smart Microinverter is individually connected to one PV module in the array. Each PV module has the individual Maximum Peak Power Point Tracker (MPPT) control and insures the maximum power is exported to the utility grid regardless of the performance of the other PV modules in the array. When PV modules in the array under non-ideal conditions in practical applications such as PV modules are affected by shading, soiling, orientation, or mismatch, Smart Microinverter insures top performance for maximizes energy production from the whole PV system and gets return on investment in less time. All our products are brand new and sealed. We take our reputation seriously. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “bookmarkdeals” and is located in this country: US. This item can be shipped to United States.

EAN: 0730440351805
MPN: SP-MGI-1000W
UPC: 730440351805
Brand: KRXNY

Category: krxny | Comments Off

February 23

Solar Micro Inverter 1200W Grid Tie MPPT DC 17-50V AC 80-160V Waterproof

Solar Micro Inverter 1200W Grid Tie MPPT DC 17-50V AC 80-160V Waterproof. Plug Type: US Standard. Maximum Input DC Voltage: 54V. Peak Power Tracking Voltage: 22-45V. Operating Voltage Range: 17-50V. Min/Max Start-up Voltage: 22-50VDC. Maximum DC Short Circuit Current: 80A. Maximum Input Operating Current: 54.4A. Peak Power Output: 1200watt. Rated Output Power: 1150watt. Rated Output Current: 9.58A. Rated Voltage Range: 80-160VAC. Rated Frequency Range: 57-62.5Hz. Max Unit Per Branch Circut: 3pcs(Single-phase). Static MPPT Efficiency: 99.5%. Maximum Output Efficiency: 91.2%. Night Time Power Loss. Communication Mode: Power Line Carrier. Power Transmission Mode: Reverse Transmission, Load Priority. Gross Weight: 4.08kg/8.99lbs. Net Weight: 2.88kg/6.35lbs. Product Size: 2137.44cm/8.2714.721.57inch. Package Size: 47.53411.5cm/18.713.394.53inch. An inverter can efficiently turn the direct current generated by solar panels into the alternating current used by household appliances. This micro inverter makes it easier. Made of fine aluminum alloy, this IP65. Inverter has a wide range of functions, good safety, convenient installation, and high-cost performance. We believe this inverter will not disappoint you. Premium Material: The inverter is made of aluminum alloy, which is durable. And not easy to rust. You can use it for a long time without frequent replacement, and your cost can be saved. High Efficiency: The inverter has built-in high-precision maximum power point tracking, which can optimize the power collection from the solar panel, accurately capture and lock the maximum output power point, and greatly increase power generation to more than 25%. In addition, the efficient power reverse transmission technology can transmit the power that can not be used up to the grid in the reverse direction to other places for use, and the power transmission rate can reach 99.9%. LCD Display: The inverter is equipped with an LCD display screen to monitor voltage, power, frequency, current, etc. So you can see the machine clearly in operation. Digital Control: The inverter adopts intelligent soft switching technology, high-frequency switching power supply technology, and 32-bit DSP full digital SPWM control technology, making the product strong. Ability, fast operation speed, high intelligence, and a powerful functional system, which can meet the needs of users. Electrical Isolation: The output and input of the system are completely electrically isolated, the insulation performance of the entire power distribution system is good, and the fully isolated booster circuit is safer and more reliable. Safety Guard: The inverter has six protection functions: over-temperature protection, under-voltage alarm, under-voltage protection, over-voltage protection, short circuit protection, overload protection, etc. Design can prevent rain from eroding its surface, so you can use it with confidence. Easy Maintenance: After the installation of the power station, you don’t need to do maintenance work. After a long time, you only need to remove the dust on the photovoltaic panel. Small Footprint: With a size of. 8.2714.721.57inch. The inverter adopts high-frequency telephone, micro processing, and other technologies, so it is smaller, lighter, and won’t occupy too much space. Flexible Installation Mode: During installation, you can stack multiple inverters at will, form a single-phase parallel stacking system, or conveniently form a three-phase system to provide a three-phase AC. Service: We have been working hard to provide better service and quality for our customers, which is our goal. If there is any quality problem with our inverters. Gasket: The inverter is equipped with two gaskets to help you install the photovoltaic support, making the inverter more stable. Heat Dissipation Holes: The inverter is provided with heat dissipation holes, which can play a good role in heat dissipation and prolong the service life of the inverter. This product is applicable to 30V or 36V solar panels, 36V batteries. The inverter can be widely used in residential or commercial areas for turning the direct current generated by solar panels into alternating current. Step 1: Install the inverter on the support of the photovoltaic panel with the screws provided by the machine. Step 2: Connect the positive and negative poles of the DC connection plug on the photovoltaic panel to the DC input terminal of the inverter. Step 3: Open the waterproof cover of the AC output interface of the inverter and connect the AC cable to the AC waterproof plug. Step 4: Connect the AC output cable to the AC main cable. Step 5: Repeat steps 1 to 3 to install and connect all inverters. Step 6: Connect the AC main cable to the public grid and start your green energy journey. Other Accessories for Installation. Please install the inverter correctly according to the instructions. If you have any questions, please contact the relevant personnel. Please don’t dismantle the machine. Only qualified maintenance personnel can repair the inverter. Please install the inverter in a place with low humidity and good ventilation to avoid overheating the inverter and remove the surrounding inflammable and explosives. When using this inverter, please take good care of your children to prevent them from touching and playing to avoid electric shock. Please note that our products are grid-connected, the AC output port has to be connected to the home grid in order to achieve grid-connected power generation. When the input load is with solar panels, it is important that the VOC voltage is between 30-48V. We recommend that the solar panel is configured for 20% more power than the power of the product. For example, if the product is 600W, the total power of the solar panels should be between 700-750W. When the input load is a battery, we recommend a battery voltage of 36V, which can be connected in series with 3 12V batteries. Please note that the positive and negative polarity should not be reversed when connecting the product. The recommended battery current is 36V/10mah for 300W, 36V/20mah for 600W, and 36V/40-45mah for 1200W. The input and output voltage of the configuration is within the normal operating voltage range of the product in order for the product to work properly and achieve grid-connected power generation. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement. Please make sure you do not mind before you order. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. LCD Display, Corrosion Resistant. MPPT (Maximum Power Point Tracking). Maximum Input DC Voltage. Peak Power Tracking Voltage. Maximum DC Short Circuit Current. Maximum Input Operating Current. Max Unit Per Branch Circut. Reverse Transmission, Load Priority. 2137.44cm/8.2714.721.57inch. 47.53411.5cm/18.713.394.53inch. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “auto-parts-stations” and is located in this country: US. This item can be shipped to United States.

Current Output: /
Type: Solar Panel Kit
Features: LCD Display, Corrosion Resistant
Brand: Unbranded
Application: Home/Garden
Resistance Properties: Waterproof
Country/Region of Manufacture: Unknown
Current Type: DC
System Configuration: Grid-Tie
Power Source: Solar
Charging Mode: MPPT (Maximum Power Point Tracking)
Model: WVC-1200W
Color: Blue
Material: Aluminium Alloy
Power: 1200W
Voltage: 110V
Plug Type: US Standard
Maximum Input DC Voltage: 54V
Peak Power Tracking Voltage: 22-45V
Operating Voltage Range: 17-50V
Min/Max Start-up Voltage: 22-50VDC
Maximum DC Short Circuit Current: 80A
Maximum Input Operating Current: 54.4A
Peak Power Output: 1200watt
Rated Output Power: 1150watt
Rated Output Current: 9.58A
Rated Voltage Range: 80-160V AC
Rated Frequency Range: 57-62.5Hz
Power Factor: ＞99％
Max Unit Per Branch Circut: 3pcs(Single-phase)
Static MPPT Efficiency: 99.5%
Maximum Output Efficiency: 91.2%
Night Time Power Loss: <1W
Total Flow Distortion: <5%
Ambient Temperature Range: ﹣40℃~60℃/﹣40℉~140℉
Waterproof Rating: IP65
Cooling Method: Self-cooling
Communication Mode: Power Line Carrier
Power Transmission Mode: Reverse Transmission, Load Priority
Gross Weight: 4.08kg/8.99lbs
Net Weight: 2.88kg/6.35lbs
Product Size: 21*37.4*4cm/8.27*14.72*1.57inch
Package Size: 47.5*34*11.5cm/18.7*13.39*4.53inch

Category: solar | Comments Off

February 2023
M	T	W	T	F	S	S
« Jan				Mar »
		1	2	3	4	5
6	7	8	9	10	11	12
13	14	15	16	17	18	19
20	21	22	23	24	25	26
27	28