July 26

Midnite Solar MNPV3 PV Combiner Breaker / Fuse Box FREE SHIPPING

Midnite-Solar-MNPV3-PV-Combiner-Breaker-Fuse-Box-FREE-SHIPPING-01-laks Midnite Solar MNPV3 PV Combiner Breaker / Fuse Box FREE SHIPPING
Midnite Solar MNPV3 PV Combiner Breaker / Fuse Box FREE SHIPPING
Midnite Solar MNPV3 PV Combiner Breaker / Fuse Box FREE SHIPPING
Midnite Solar MNPV3 PV Combiner Breaker / Fuse Box FREE SHIPPING
Midnite Solar MNPV3 PV Combiner Breaker / Fuse Box FREE SHIPPING
Midnite Solar MNPV3 PV Combiner Breaker / Fuse Box FREE SHIPPING
Midnite Solar MNPV3 PV Combiner Breaker / Fuse Box FREE SHIPPING
Midnite Solar MNPV3 PV Combiner Breaker / Fuse Box FREE SHIPPING
Midnite Solar MNPV3 PV Combiner Breaker / Fuse Box FREE SHIPPING
Midnite Solar MNPV3 PV Combiner Breaker / Fuse Box FREE SHIPPING
Midnite Solar MNPV3 PV Combiner Breaker / Fuse Box FREE SHIPPING

Midnite Solar MNPV3 PV Combiner Breaker / Fuse Box FREE SHIPPING
Photo shows MNPV3 with either breakers or fuses for reference only. Breakers are not included. Includes 6 position PV negative bus bar, 6 position ground bus bar, and 60 amp Plus bus bar. For 150 VDC to 300VDC charge controllers and up to 600 VDC grid tie inverters. The most popular PV combiner in North America. Gray aluminum type 3R rainproof enclosure with insulating dead front, will accept (3) 150VDC breakers or (2) 600VDC fuse holders. Multiple knockouts in bottom of enclosure can accept bulkhead mount MC connectors for faster on roof time and ease of installation & maintenance. Listed by ETL for US & Canada. 10.5″L x 4.5″W x 3.5D. 14″L x 9″W x 4D. Feel free to ask questions. We will answer any question as soon as possible.
Midnite Solar MNPV3 PV Combiner Breaker / Fuse Box FREE SHIPPING
Category: midnite | Comments Off
November 19

MIDNITE SOLAR Disconnect Combiner Box MNPV8HV-DLTL-3R-PSB for Dual MPPT inverter

MIDNITE-SOLAR-Disconnect-Combiner-Box-MNPV8HV-DLTL-3R-PSB-for-Dual-MPPT-inverter-01-et MIDNITE SOLAR Disconnect Combiner Box MNPV8HV-DLTL-3R-PSB for Dual MPPT inverter

MIDNITE SOLAR Disconnect Combiner Box MNPV8HV-DLTL-3R-PSB for Dual MPPT inverter
MIDNITE SOLAR Disconnect Combiner Box. For Dual MPPT inverters. 4 strings into the combiner with 2 separate 20 amp strings out. Specifically designed for the new dual channel MPPT on transformer-less inverters. This configuration will break the Positive and Negative of 2 separate 600vdc strings. There are 4 strings entering the combiner with 2 separate strings out. Specifically designed for the new dual channel MPPT on transformer-less inverters with Power Supply board factory installed. Disconnect combiners have both dual-string fusing and dual-channel output. Work for inverters with ungrounded conductors and dual-MPPT input channels which are becoming. Both the positive and negative legs are fused, and the fuse holders are included. Available with the Rapid-Shutdown PSB circuit board installed. The MNPV8HV-DLTL 3R’s red handled is LOCKABLE IN THE OFF POSITION. 4 strings into the combiner with 2 separate 30 amp strings out. The difference between the regular Disco combiner and the DLTL version is that the MNPV8HV-Disco-4X is made for a single 8 string inverter, two 4 string inverters or one 4 string transformerless where as the DLTL is set up for 4 strings in and 2 strings out for Dual MPPT on transformerless. The item “MIDNITE SOLAR Disconnect Combiner Box MNPV8HV-DLTL-3R-PSB for Dual MPPT inverter” is in sale since Monday, August 24, 2020. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Solar Power Supplies\Solar Power Accessories”. The seller is “solartradeworld” and is located in Palo Alto, California. This item can be shipped to United States.
  • Model: MNPV8HV-DLTL-3R-PSB
  • System Configuration: Grid-Tie
  • Power Source: Solar
  • Type: Solar Combiners
  • MPN: MNPV8HV-3R-PSB
  • Brand: MidNite Solar
  • Application: Solar

MIDNITE SOLAR Disconnect Combiner Box MNPV8HV-DLTL-3R-PSB for Dual MPPT inverter
Category: midnite | Comments Off
December 22

MidNite Pre-wired Inverter System- Schneider MNXWP7048E-CL150 -Grid Tie/Off Grid

MidNite Pre-wired Inverter System- Schneider MNXWP7048E-CL150 -Grid Tie/Off Grid

MidNite Pre-wired Inverter System- Schneider MNXWP7048E-CL150 -Grid Tie/Off Grid
MidNite Solar MNXWP7048E-CL150 – Pre Wired Inverter System with Schneider Electric inverter for Off Grid or Grid Tie systems. NOTE: We sell other systems as well. Please visit our store for more products. We can create custom listings for you. Pre Wired Schneider Electric Conext XW+ 7048 Export version 230 vac / 50HZ Inverter for Off grid or Battery based Grid Tie 7000 watt 48 volt inverter AC Bypass Assembly included Classic 150 installed. MidNite Solar pre-wired inverter systems offer a turn key solution to installing a battery based inverter system, saving you time in the field. With a pre-wired solution all of the confusion is taken out of selecting all the right parts. This system uses the Schneider Electric Conext XW+ Export inverter that is rated at 7,000 watts and uses a 48 volt battery. It produces 230 volts and 50 HZ and has two separate AC inputs. Also consider looking at other MidNite Solar products that compliment the pre-wired inverter system like Battery Boxes or Disconnecting Combiners. MidNite Solar pre wired systems can be configured in about any way needed with any of the common battery based inverters (except OutBack). This system is also available using the Schneider Conext XW+ Export 8548 Below is a simple list of the major components included in the system. Schneider Electric Context XW+ Pre-Wired 7048 230 vac / 50HZ Export Inverter for Off Grid or Battery based Grid tie. Schneider System Control panel. Classic 150 charge controller with DC-GFP (Ground Fault protection) and Arc Fault protection built in. Three MNSPD300’s (Surge Protection Devices). 250 amp Battery Main Breaker for the XW Inverter. MidNite E-Panel, Classic Charge Contoller and SPD’s made in the USA. Schneider XW Inverter made in China. General labor for assembly, test and crating included. The Whizbang Jr (MNWBJR) current sense module for Classic provides battery state of charge and is included with this product. This is a Rapid Shut down compliant upgrade of this model. The RSS Upgrade includes. RT main DC breaker (125, 175 or 250 amp depending on E-Panel). A MNBDM (to control the main breaker). A MNEPV5 DC breaker to protect the wire and MNBDM. Full function testing of the rapid shut down. With a Classic 200 and high voltage input breakers instead of a Classic 150. With a Classic 250 and high voltage input breakers instead of a Classic 150. The second Classic will include dual mounting bracket, SPD300, 2 DC breakers and wiring. The second Classic will include dual mounting bracket, SPD300, 2 DC breakers, wiring and high voltage input breakers. MidNite Solar Profile MidNite Solar is an innovative manufacturing company that started by making high quality, cost effective AC and DC disconnect boxes for the alternative energy industry. Now, MidNite produces a wide range of alternative energy products. MidNite’s Classic series of Maximum Power Point Tracking (MPPT) charge controllers are the most powerful, full featured controllers on the market as well as being the only ETL listed controllers designed to work with Solar, Wind, and Micro Hydro Electric systems. MidNite offers a full line of pre-wired, battery based systems for standalone off grid, battery based grid tie, as well as AC coupled battery backup installations. MidNite features SMA, Schneider / Xantrex, Outback, and Magnum Energy Inverters in our pre-wired systems, providing a wide range of solutions for residential and commercial projects. The new line of Disconnecting Combiner boxes are another industry first, meeting all of the new NEC requirements for this class of equipment. MidNite’s full range of Surge Protection Devices (SPD) offer the highest levels of protection from lightning and power line surges. They’re very competitively priced. This is just a few of the MidNite Solar products that are designed and manufactured in the Arlington Washington facility and installed in alternative energy systems around the world! The item “MidNite Pre-wired Inverter System- Schneider MNXWP7048E-CL150 -Grid Tie/Off Grid” is in sale since Wednesday, December 21, 2016. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “bubskiy” and is located in Nationwide. This item can be shipped to United States.
  • Brand: MidNite Solar
  • Model: MNXWP7048E-CL150

MidNite Pre-wired Inverter System- Schneider MNXWP7048E-CL150 -Grid Tie/Off Grid
Category: midnite | Comments Off
December 21

MidNite Solar Pre-wired Inverter System SMA MNSI6048-CL150 Grid Tie/Off Grid

MidNite Solar Pre-wired Inverter System SMA MNSI6048-CL150 Grid Tie/Off Grid
MidNite Solar Pre-wired Inverter System SMA MNSI6048-CL150 Grid Tie/Off Grid

MidNite Solar Pre-wired Inverter System SMA MNSI6048-CL150 Grid Tie/Off Grid
MidNite Solar MNSI6048-CL150 – Pre Wired Inverter System with SMA inverter for Off Grid or Grid Tie systems. NOTE: We sell other systems as well. Please visit our store for more products. We can create custom listings for you. SMA Sunny Island 6048 120 vac Inverter AC Bypass assembly included 6000 watt 48 volt inverter Classic 150. MidNite Solar pre-wired inverter systems offer a turn key solution to installing a battery based inverter system, saving time in the field. With a pre-wired solution all of the confusion is taken out of selecting all the right parts. This system uses the SMA Sunny Island inverter that is rated at 6,000 watts and uses a 48 volt battery. It produces 120 volts AC and has a single AC input. MidNite does offer an automatic transfer relay that can be installed in the E-panel that will allow the Sunny Island to automatically select between two AC inputs (For example the grid or generator). Also consider looking at other MidNite Solar products that compliment the pre-wired inverter system like Battery Boxes or Disconnecting Combiners. MidNite Solar pre wired systems can be configured in about any way needed with any of the common battery based inverters (except OutBack). Below is a simple list of the major components included in the system. SMA Sunny Island Pre-Wired 6048 120 vac Inverter for Off Grid or Battery based Grid tie. Classic 150 charge controller with DC-GFP (Ground Fault protection) and Arc Fault protection built in. Two MNSPD300’s (Surge Protection Devices). 250 amp Battery Main Breaker for the Sunny Island. Listed by ETL for US & Canada. MidNite E-Panel, Classic Charge Contoller and SPD’s made in the USA. SMA Sunny Island Inverter made in Germany. General labor for assembly, test and crating included. The Whizbang Jr current sense module for Classic provides battery state of charge and is included with this product. The MNSI6048-CL200-RSS is a Rapid Shut down compliant upgrade of this model. The RSS Upgrade includes. RT main DC breaker (125, 175 or 250 amp depending on E-Panel). A MNBDM (to control the main breaker). A MNEPV5 DC breaker to protect the wire and MNBDM. Full function testing of the rapid shut down. With Classic 200 and high voltage input breakers instead of a Classic 150. With Classic 250 and high voltage input breakers instead of a Classic 150. Two Classic 150 Charge Controllers, mounting bracket, SPD300, 2 DC breakers and wiring. Two Classic 200 Charge Controllers, mounting bracket, SPD300, 2 high voltage DC breakers and wiring. Two Classic 250 Charge Controllers, mounting bracket, SPD300, 2 high voltage DC breakers and wiring. MidNite Solar Profile MidNite Solar is an innovative manufacturing company that started by making high quality, cost effective AC and DC disconnect boxes for the alternative energy industry. Now, MidNite produces a wide range of alternative energy products. MidNite’s Classic series of Maximum Power Point Tracking (MPPT) charge controllers are the most powerful, full featured controllers on the market as well as being the only ETL listed controllers designed to work with Solar, Wind, and Micro Hydro Electric systems. MidNite offers a full line of pre-wired, battery based systems for standalone off grid, battery based grid tie, as well as AC coupled battery backup installations. MidNite features SMA, Schneider / Xantrex, Outback, and Magnum Energy Inverters in our pre-wired systems, providing a wide range of solutions for residential and commercial projects. The new line of Disconnecting Combiner boxes are another industry first, meeting all of the new NEC requirements for this class of equipment. MidNite’s full range of Surge Protection Devices (SPD) offer the highest levels of protection from lightning and power line surges. They’re very competitively priced. This is just a few of the MidNite Solar products that are designed and manufactured in the Arlington Washington facility and installed in alternative energy systems around the world! The item “MidNite Solar Pre-wired Inverter System SMA MNSI6048-CL150 Grid Tie/Off Grid” is in sale since Wednesday, December 21, 2016. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “bubskiy” and is located in Nationwide. This item can be shipped to United States.
  • Brand: MidNite Solar
  • Model: MNSI6048-CL150

MidNite Solar Pre-wired Inverter System SMA MNSI6048-CL150 Grid Tie/Off Grid
Category: midnite | Comments Off
December 21

MidNite Pre-wired Inverter System SMA MNSI6048D-2CL150 Grid Tie/Off Grid

MidNite Pre-wired Inverter System SMA MNSI6048D-2CL150 Grid Tie/Off Grid

MidNite Pre-wired Inverter System SMA MNSI6048D-2CL150 Grid Tie/Off Grid
MidNite Solar MNSI6048D-2CL150 – Pre Wired Inverter System with SMA inverter for Grid Tie or Off Grid systems. NOTE: We sell other systems as well. Please visit our store for more products. We can create custom listings for you. Dual SMA Sunny Island 6048 120 vac Inverter Off Grid or Grid tied AC Bypass assembly included Dual 6000 watt 48 volt inverters Dual Classic 150s. MidNite Solar pre-wired inverter systems offer a turn key solution to installing a battery based inverter system, saving time in the field. With a pre-wired solution all of the confusion is taken out of selecting all the right parts. Hookup between inverters done with included wire and conduit. This system uses 2 of the SMA Sunny Island inverter that are rated at 6,000 watts each and uses a 48 volt battery. It produces 120/240 volts AC and has a single AC input. MidNite does offer an automatic transfer relay that can be installed in the E-panel that will allow the Sunny Island to automatically select between two AC inputs (for example the grid or generator). Also consider looking at other MidNite Solar products that compliment the pre-wired inverter system like Battery Boxes or Disconnecting Combiners. MidNite Solar pre wired systems can be configured in about any way needed with any of the common battery based inverters (except OutBack). Below is a simple list of the major components included in the system. The Whizbang Jr (MNWBJR) current sense module for Classics provides battery state of charge and is included with this product. Two SMA Sunny Islands Pre-Wired 6048 120/240 vac Inverter sfor Off Grid or Battery based Grid tie. Two Classic 150 charge controller with DC-GFP (Ground Fault protection) and Arc Fault protection built in. Two MNSPD300’s (Surge Protection Devices). Two 250 amp Battery Main Breaker for the Sunny Islands. Listed by ETL for US & Canada. MidNite E-Panel, Classic Charge Contoller and SPD’s made in the USA. SMA Sunny Island Inverter made in Germany. General labor for assembly, test and crating included. This is a Rapid Shut down compliant upgrade of this model. The RSS Upgrade includes. RT main DC breaker (125, 175 or 250 amp depending on E-Panel). A MNBDM (to control the main breaker). A MNEPV5 DC breaker to protect the wire and MNBDM. Full function testing of the rapid shut down. With 2 Classic 200’s and high voltage input breakers instead of a Classic 150’s. With 2 Classic 250’s and high voltage input breakers instead of a Classic 150’s. The third Classic will include dual mounting bracket, SPD300, 2 DC breakers and wiring. The third Classic will include dual mounting bracket, SPD300, 2 DC breakers, wiring and high voltage input breakers. The fourth Classics will include dual mounting bracket, SPD300, 2 DC breakers and wiring. The fourth Classics will include dual mounting bracket, SPD300, 2 DC breakers, wiring and high voltage input breakers. MidNite Solar Profile MidNite Solar is an innovative manufacturing company that started by making high quality, cost effective AC and DC disconnect boxes for the alternative energy industry. Now, MidNite produces a wide range of alternative energy products. MidNite’s Classic series of Maximum Power Point Tracking (MPPT) charge controllers are the most powerful, full featured controllers on the market as well as being the only ETL listed controllers designed to work with Solar, Wind, and Micro Hydro Electric systems. MidNite offers a full line of pre-wired, battery based systems for standalone off grid, battery based grid tie, as well as AC coupled battery backup installations. MidNite features SMA, Schneider / Xantrex, Outback, and Magnum Energy Inverters in our pre-wired systems, providing a wide range of solutions for residential and commercial projects. The new line of Disconnecting Combiner boxes are another industry first, meeting all of the new NEC requirements for this class of equipment. MidNite’s full range of Surge Protection Devices (SPD) offer the highest levels of protection from lightning and power line surges. They’re very competitively priced. This is just a few of the MidNite Solar products that are designed and manufactured in the Arlington Washington facility and installed in alternative energy systems around the world! The item “MidNite Pre-wired Inverter System SMA MNSI6048D-2CL150 Grid Tie/Off Grid” is in sale since Wednesday, December 21, 2016. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “bubskiy” and is located in Nationwide. This item can be shipped to United States.
  • Brand: MidNite Solar
  • Model: MNSI6048D-2CL150

MidNite Pre-wired Inverter System SMA MNSI6048D-2CL150 Grid Tie/Off Grid
Category: midnite | Comments Off