2000W 48V Wind Grid Tie Inverter withLimiter+RS485 Pure Sine Wave DC45-90V AC220V

2000W 48V Wind Grid Tie Inverter w/Limiter+RS485 Pure Sine Wave DC45-90V AC220V. Good Preise & Top Service. The test point should be at the DC side of the built-in rectifier of the inverter, but you can calculate from 3 phases of AC output voltage of the wind turbine to get the DC voltage, the formula is Vac = Vdc/1.732. For example, if the DC input voltage range of the inverter is 4590V, then the wind turbine’s output AC range of the should be 45/1.73290/1.732 = AC25.9V 51.96V. This model grid tie has designed for wind turbines that put out 3 phases AC voltage. It can maintain the rotating speed of the wind turbine and keep the voltage from the wind turbine always at the range of the rated range of the grid tie inverter. It also has a high voltage protection function, when the wind is too big, and the dump load controlling system can’t keep the output voltage from the wind turbine, the controller will disconnect itself from the wind turbine, so it is very safe to be used. Wind Grid Tie Inverter with Limiter Sensor, which can prevent excess power from going to the public grid. Select the internal limiter mode, inverter will work under limiter mode, output power of the inverter will be determined by load power. The backlit LCD display gives you a clear picture of the inverter’s operating status. The status of errors will be displayed with red letters on the grid tie inverter LCD display. Easy installation, Can be paralleled on AC side. Overload protection, Anti-island protection, Short-circuit protection/Reverse polarity protection. For 110/120V US home appliances Devices. You can simply add a Transformer (not includes) which stepping down 220/240V AC power to 110/120V AC Power, then your 110V home appliances is also ok to use at the same time, this inverter can’t output 110V power, this is a Single-phase 220V output inverter. Ensure that you operate and use our products smoothly. We call a system combining with a small grid tie inverter and a wind turbine as “SGWT”. The small type of wind grid tie power inverter can obtain the wind energy from wind turbines and tie to the grid through its output cables with no extra equipment. The inverter can be connected to any outlets of the utility grid at the house. The small grid tie inverter monitors the volume, frequency, and phase of the home utility grid, producing pure sine wave AC power that the frequency and phase are the same as the grids. The small grid tie inverter puts out power when the home grid is on. When the AC wind turbine is rotating, and its output of the voltage is in the range of the rated input voltage of the inverter, the wind turbine will produce power, and the grid tie inverter will change the power from the wind turbine to the home grid. When the total power of the electric appliance that is using in the house is larger than the output power of the inverters, this power from the inverters will be consumed in the house. This will slow down the power meter; otherwise, the difference of the output power of the inverter between the total used power of the appliance will go out from the house to the out grid. NOTE: Any DC power input is prohibited. The Advantage of Inverter. Directly connect to three phase wind turbine(48V AC Wind Turbine Generator). Plug and play, easy to install. Can be paralleled on AC side. Built-in dump Load controller. Each inverter need to pass twice testing (20 hours) before leaving factory. Wind Turbine Voltage Range:AC25.9V 51.96V. How to choose the correct wind AC output voltage? You can calculate from 3 phases of AC output voltage of the wind turbine to get the DC voltage, the formula is Vac = Vdc/1.732. Input AC/DC Voltage Range:45-90V. AC Output Voltage Range:90-260VAC. Peak Inverter Efficiency:92%. Power Factor:0.99. Output Wave Form:Pure Sine Wave. Over Current Protection:Yes. Over Temperature Protection:Yes. Reverse Polarity Protection:Yes. VDE-AR-N 4105:2018-11;DIN VDE V 0124-100:2020-06. Weight (Kg):7.48KG. Dimensions (W x H x D):43419688mm. Dump load resistor connection Terminal. This terminals will connect to the dump load resistor. AC socket, This socket will connect the inverter to the public grid via the AC cable. This terminals will connect to the wind turbine. The Inverter display can show many information, The main interface of the display and the icons explainations are show above. The inverter also integrate with internal limiter and external limiter function which can prevent excess power from going to the public grid. Save the setting after you reconfigurate the working mode or backlight setting. Installing Sunshine Grid Tie Power System involves several key steps. Considering the total capacity of the grid tie power system that you need. Choosing applicable wind turbine for Sunshine Grid Tie Inverter. Selecting accessory for installation of the Grid Tie Power System. Selecting correct model of Sunshine Grid Tie Inverter. Installing wind turbine to suitable place. Installing Sunshine Grid Tie Inverter to suitable place. Connecting Sunshine Grid Tie Power System with cables and connectors. Three Phases Grid Tie Power System. For example, installing a 6KW grid tie power system to three phase utility grid. The diagram is shown in Fig. 8, we seperate 6KW power sytem to three power system units, every unit has 2KW power. Connecting every system unit to different phase, this canbalance all grid tie power to three phases of the utility grid. Fllow this way, you can install more large grid tie power system to three phases, justseperate the whole power system to three equal power system units. If it exceeds one year, we still provide after-sales service, but the after-sales accessories need to be paid by yourself. We will reply to your message within 24 hours. You have requested a return and we will provide you with a free return.

Category: 2000w | Comments Off

November 18

2000W Solar Grid Tie Inverter Power Limiter MPPT DC45-90V AC220V 50/60HZ Auto

100A Solar Panel Charge Controller Regulator 12V 24V With Dual USB Port WIFI LCD. 40A MPPT Solar Charge Controller Regulator With LCD Dual USB and WIFI 12V/24V. 700W Solar Micro Inverter MPPT Grid Tie Inverter DC18-50V for 36V Panel AC110V. New 1300W Solar Grid Tie Inverter Pure Sine Wave MPPT DC18V to AC110V/220V CE. 1000W Solar Grid Tie Inverter MPPT Pure Sine Wave Inverter DC16-28V to AC110V. 1400W Solar Grid Tie Micro Inverter DC30-46V to AC110V for 30V/36V PV Panel MPPT. 500W Grid Tie Inverter DC16V-28V Pure Sine Wave MPPT AC120V for 12V Solar Panel. 10200W 48V Hybrid Solar Inverter Pure Sine Wave 160A MPPT Controller Two load in. 4200W 24V Hybrid Solar Inverter On/Off-Grid built-in120A MPPT Charge Controller. 6200W 48V Hybrid Solar Inverter On/Off-Grid built-in120A MPPT Charger Controller. Used 6200W 48V Hybrid Solar Inverter On/Off-Grid Inverter MPPT 120A Charger. 10A/20A/30A LCD Solar Panel Battery Regulator 12V/24V Charge Controller Dual USB. 600W Solar Grid Tie Micro Inverter WIFI Monitor MPPT DC30-60V for 36V PV Panel. 2200W 12V Solar Hybrid Inverter AC230V MPPT 80A Charger Max PV 2000W Input. 3200W 24V Solar Hybrid Inverter Off-Grid AC230V 80A MPPT Max PV 3000W DC55-450V. 1000W MPPT Grid Tie Inverter Stackable Limiter Sensor DC26-60V Pure Sine Wave. 2000W Grid Tie Inverter MPPT with Power Limiter Sensor DC60-110V AC185-265V. 80A 100A MPPT Solar Charge Controller 12V 24V 36V 48V Battery Regulator Max 100V. 5.5KW Hybrid Solar Inverter MPPT 100A 500VDC PV 220VAC 48VDC Pure Sine Wave. New 1200W Solar Grid Tie Inverter MPPT DC28-50V to AC110/220V for 30/36V Panel. 600W Solar Grid Tie Inverter AC Monitor Display DC28-50VAC110V for 24V 36V Panel. 2000W Solar Grid Tie Inverter Power Limiter MPPT DC45-90V AC220V 50/60HZ Auto. New function: with working time setting, users can use the function of battery peak shaving and valley filling. Why we produced the GRID TIE INVERTER WITH LIMITER? It is in response to the overwhelming clamor from our customers for a product that can control the amount of power that the grid tie inverters (GTI) can generate so that the amount of excess power produced by the solar panels are reduced to insignificant levels, if not eliminated — because in some countries, the producer pays for the excess power it gives to the distribution grid. This is because the electric power meters (the one provided by the electricity provider in the area) are not aware of the direction of power flow. In other words it only adds even if power is exported to the grid, thus, the consumers will be charged for power even if it is given to the grid, and this is the problem. This is the 2nd generation grid tie inverter with limiter. But in case customer install inverter far away from the main circuit breaker, we also enable the 2nd GTIL work with stand-alone limiter, we call this-external limiter. For sure, the inverter can work under normal Grid tie-no limit mode, just set on the nice LCD and save your setting. New upgraded firmware enable battery or solar limiter current and power model. User can set the maximum output power of inverter, this can make the inverter work at cooler contition as user want and extend the lifespan of the inverter. User can set kick in/off voltage of the inverter which can flexible using with battery bank depend on users mind and can prevent battery bank from over discharged. Input DC Voltage Range:45V 90V. Peak power tracking voltage:50V-90V. AC Output Voltage Range:190VAC 260VAC. Output Wave Form:Pure Sine Wave. Dimensions (W x H x D):434x196x88 mm. Applied Standards:VDE-AR-N 4105:2018-11;DIN VDE V 0124-100:2020-06. How to use the Inverter? Standard Grid Tie Inverter Model. More than 1 unit inverters stackable. The Grid Tie inverter converts DC power produced by Solar Panels to AC, connects to the grid and feed all of the power available from the panels to the AC load. All excess power that is not needed by the load is then exported to the Grid. If the Grid fails, then the Grid Tie Inverter will turn off. When the Grid comes back on line. The Grid Tie Inverter will again supply power to the load and any excess power is exported to the Grid again. If the Solar Panel is producing less power and the GTI cannot deliver all the power needed by the load, then power will be supplemented by the Grid. Power Meters (Except smart meter) are not aware of the direction of Power flow. The user then pays for the power exported and delivered by the Grid. Using Grid Tie Inverter With Limiter Model. The Grid Tie Inverter with Limiter delivers only the power needed by the load and prevents delivering excess power hence avoids excess power in going back to the Grid. The heart of the Grid Tie Inverter with Limiter is the Limiter Module (LM). The LM continuously sampled the power needed by the load through the current sensor connected after the Main Circuit Breaker. The LM then will process the signal. It then sends signal to Grid Tie Inverter how much power to deliver to the load in real time. The user, after installing and connecting the GTIL correctly, need not do anything and the unit will do its work automatically. Installation of GTIL With Internal Limiter. This installation is not require an additional limiter module, Installation is much easier. Clamp the current sensor cable to the hot wire to measure the current, the internal limiter will auto detect the load power and control the inverter output power, excess power will be well controlled. External protective device including dc and ac SPD(Surge protection device), dc and ac breaker, etc is recommended to installed in the system. Limiter Setting on the LCD of the inverter. The GTIL include three working mode:Work as normal GTI without power limitation. Work under Internal limiter mode and Work under External limiter mode, Pls make your setting on the LCD and save it, details setting operation, pls read the GTI manual. 5 Battery Discharge Power Mode. 6 Limiter Module Specification. Clamp sensor- Max 100A. Clamp sensor signal- 5v AC max mA. DC signal Cable- 5v DC, max mA. 1 x Solar Grid Inverter with Limiter. 1 x Internal type Limiter clamp with sensor & 2m cable. 1 x English User Manual. Y&H machine certification, safer and more compliant. Sellers are not responsible for service transit time. Transit times are provided by the carrier, exclude weekends and holidays, and may vary with package origin and destination, particularly during peak periods. (Only for Business Express). Feedback is very important to us. Please do not give us any bad feedback. If you can do as we say, we will be very grateful. Please give us the opportunity to resolve any problem. If it exceeds one year, we still provide after-sales service, but the after-sales accessories need to be paid by yourself. We will reply to your message within 24 hours. You have requested a return and we will provide you with a free return.

Category: 2000w | Comments Off

September 13

2000W Solar Grid Tie Inverter MPPT Power Limiter DC45-90V to AC220V 50/60HZ Auto

2200W 12V Solar Hybrid Inverter Off-Grid Pure Sine Wave AC230V 80A MPPT Charger. 3000W 24V Solar Hybrid Inverter AC220V Off-Grid Pure Sine Wave Inverter 80A MPPT. 4200W 24V Solar Hybrid Inverter On/Off-Grid AC220V 120A MPPT Charger Controller. 4500W 24V Solar Hybrid Inverter Pure Sine Wave 150A MPPT Solar Charger With LCD. 1600W 12V Solar Hybrid Inverter Charger 220V MPPT 80A Pure Sine Wave Controller. 2000W Solar Grid Tie Inverter MPPT Power Limiter DC45-90V to AC220V 50/60HZ Auto. New function: with working time setting, users can use the function of battery peak shaving and valley filling. Why we produced the GRID TIE INVERTER WITH LIMITER? It is in response to the overwhelming clamor from our customers for a product that can control the amount of power that the grid tie inverters (GTI) can generate so that the amount of excess power produced by the solar panels are reduced to insignificant levels, if not eliminated — because in some countries, the producer pays for the excess power it gives to the distribution grid. This is because the electric power meters (the one provided by the electricity provider in the area) are not aware of the direction of power flow. In other words it only adds even if power is exported to the grid, thus, the consumers will be charged for power even if it is given to the grid, and this is the problem. This is the 2nd generation grid tie inverter with limiter. But in case customer install inverter far away from the main circuit breaker, we also enable the 2nd GTIL work with stand-alone limiter, we call this-external limiter. For sure, the inverter can work under normal Grid tie-no limit mode, just set on the nice LCD and save your setting. New upgraded firmware enable battery or solar limiter current and power model. User can set the maximum output power of inverter, this can make the inverter work at cooler contition as user want and extend the lifespan of the inverter. User can set kick in/off voltage of the inverter which can flexible using with battery bank depend on users mind and can prevent battery bank from over discharged. Input DC Voltage Range:45V 90V. Peak power tracking voltage:50V-90V. AC Output Voltage Range:190VAC 260VAC. Output Wave Form:Pure Sine Wave. Dimensions (W x H x D):434x196x88 mm. Applied Standards:VDE-AR-N 4105:2018-11;DIN VDE V 0124-100:2020-06. How to use the Inverter? Standard Grid Tie Inverter Model. More than 1 unit inverters stackable. The Grid Tie inverter converts DC power produced by Solar Panels to AC, connects to the grid and feed all of the power available from the panels to the AC load. All excess power that is not needed by the load is then exported to the Grid. If the Grid fails, then the Grid Tie Inverter will turn off. When the Grid comes back on line. The Grid Tie Inverter will again supply power to the load and any excess power is exported to the Grid again. If the Solar Panel is producing less power and the GTI cannot deliver all the power needed by the load, then power will be supplemented by the Grid. Power Meters (Except smart meter) are not aware of the direction of Power flow. The user then pays for the power exported and delivered by the Grid. Using Grid Tie Inverter With Limiter Model. The Grid Tie Inverter with Limiter delivers only the power needed by the load and prevents delivering excess power hence avoids excess power in going back to the Grid. The heart of the Grid Tie Inverter with Limiter is the Limiter Module (LM). The LM continuously sampled the power needed by the load through the current sensor connected after the Main Circuit Breaker. The LM then will process the signal. It then sends signal to Grid Tie Inverter how much power to deliver to the load in real time. The user, after installing and connecting the GTIL correctly, need not do anything and the unit will do its work automatically. Installation of GTIL With Internal Limiter. This installation is not require an additional limiter module, Installation is much easier. Clamp the current sensor cable to the hot wire to measure the current, the internal limiter will auto detect the load power and control the inverter output power, excess power will be well controlled. External protective device including dc and ac SPD(Surge protection device), dc and ac breaker, etc is recommended to installed in the system. Limiter Setting on the LCD of the inverter. The GTIL include three working mode:Work as normal GTI without power limitation. Work under Internal limiter mode and Work under External limiter mode, Pls make your setting on the LCD and save it, details setting operation, pls read the GTI manual. 5 Battery Discharge Power Mode. 6 Limiter Module Specification. Clamp sensor- Max 100A. Clamp sensor signal- 5v AC max mA. DC signal Cable- 5v DC, max mA. 1 x Solar Grid Inverter with Limiter. 1 x Internal type Limiter clamp with sensor & 2m cable. 1 x English User Manual. Y&H machine certification, safer and more compliant. Sellers are not responsible for service transit time. Transit times are provided by the carrier, exclude weekends and holidays, and may vary with package origin and destination, particularly during peak periods. (Only for Business Express). Feedback is very important to us. Please do not give us any bad feedback. If you can do as we say, we will be very grateful. Please give us the opportunity to resolve any problem. If it exceeds one year, we still provide after-sales service, but the after-sales accessories need to be paid by yourself. We will reply to your message within 24 hours. You have requested a return and we will provide you with a free return.

Category: 2000w | Comments Off

October 31

800W MPPT Waterproof Solar Grid Tie Inverter with LCD Meter DC24V/36V to AC220V

MPPT 1300W Grid Tie Inverter DC24V to AC220V Pure Sine Wave Inverter 50/60Hz CE. 1000W MPPT Grid Tie Inverter DC24V to AC110V 50Hz/60Hz Pure Sine Wave Inverter. 1300W Grid Tie Inverter DC18V to AC110V Pure Sine Wave Inverter MPPT 50/60Hz CE.

Category: 800w | Comments Off

April 20

Solar Grid Tie Inverter 1000W DC24V 48V 72V AC110V AC220V Discharge Auto-Limit

Solar Grid Tie Inverter 1000W DC24V 48V 72V AC110V AC220V Discharge Auto-Limit. The product came very well packaged. I’m very happy. Thank you for everything. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “yossi-store” and is located in this country: CN. This item can be shipped worldwide.

Color: With Limiter
Input Voltage: PV 26-45V(24V BAT)
Output Voltage: 90-140Vac 50hz60hz
Brand: Unbranded
System Configuration: Grid-Tie
Current Type: DC

Category: solar | Comments Off

September 20

Solar grid tie inverter 1000W-1200W 48V 24V Battery Discharge AC110V AC220V

Solar grid tie inverter 1000W-1200W 48V 24V Battery Discharge AC110V AC220V. Why we produced the GRID TIE INVERTER WITH LIMITER? It is in response to the overwhelming clamor from our customers for a product that can control the amount of power that the grid tie inverters (GTI) can generate so that the amount of excess power produced by the solar panels are reduced to insignificant levels, if not eliminated — because in some countries, the producer pays for the excess power it gives to the distribution grid. This is because the electric power meters (the one provided by the electricity provider in the area) are not aware of the direction of power flow. In other words it only adds even if power is exported to the grid, thus, the consumers will be charged for power even if it is given to the grid, and this is the problem. This is the 2nd generation grid tie inverter with limiter. This is the second generation grid-connected inverter with limiter. With the second generation GTN-LIM, we added a acquisition. The collecting meter collects the power consumption of the load through the sensor, and then transmits it to the inverter. The inverter will output the corresponding power to the grid, which we call an external power acquisition. How to connect the sensor? Connect the RS485 cable of the AC power acquisition meter to the 485 port of the inverter. Plug the connection terminal of the transmitted current sensor into the port of the collector “CT-IN” (no +-). Connect the AC power supply port “AC-IN” of the collector to the same AC power supply for the load. After the connection, it will light up. In the inverter LCD, enter the “battery grid connection”, through the SET {Bat Auto Limit Grid} for Y. Connect the inverter to AC power first, then connect the battery, the inverter will automatically output the same power as the power detected by the collector. Therefore, the inverter will not have excess electricity to be sent to the grid i. One acquisition meter can connect 5 unit grid tie inverters. 1200W Grid Tie Inverter Specifications. Solar Grid Inverter with Limiter—–1unit. AC power acquisition meter 1 unit. Limiter sensor clamp —-1pcs. AC cable 50cm————-1 pcs. Installation and operation manual (English). Please note that this service is NOT track able. It’s track able. Could be longer than usual. Please add another 5-10 days as a delay. Please read all the descriptions provided as a guide before you. Your satisfaction is important to us and we value your business. Then we will be able to provide the best service for you. Please do the same for us if you are satisfied with our products and the service. If you don’t receive a reply please kindly be patience and we will reply ASAP. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “fly-buy_onlineshop” and is located in this country: CN. This item can be shipped to United States, all countries in Europe, Canada, Australia.

Color: 1200LIM with limiter
Output Voltage: 220-240V
Size: 42x26x17
Current Type: AC
System Configuration: Grid-Tie
Type: Charger/Inverter
Brand: Unbranded
Output Frequency: 50/60Hz
Output Power: 801 – 1000KW
Output Type: Single
Weight: 4
Certification: CE
Is Smart Device: YES
Is_customized: Yes

Category: solar | Comments Off

June 23

Inverter Grid Tie Solar 1000W DC24V 48V 72V AC110V AC220V Discharge Auto-Limit

Inverter Grid Tie Solar 1000W DC24V 48V 72V AC110V AC220V Discharge Auto-Limit. HEY WELCOME TO MY SHOP. Model Number: GTN-1000/ GTN-1200. Output wave: Pure Sine Wave. Output Voltage: 90V-140Vac or 180V -260Vac. Input Voltage(PV input): PV Voltage 55V-180V. Compatible: Solar panels or battery. Application: Work for solar panel, battery, battery discharge. Features and further details. For 1000W MPPT solar grid tie inverter, 5 kinds of DC input voltage specifications can be selected. 1 PV-voc voltage range: 26V45V or 24v battery. 2 PV-voc voltage range: 40V-60V or 36v battery. 3 PV-voc voltage range: 55V-90V or 48v battery. 4 PV-voc voltage range: 85V-130V or 72v battery. 5 PV-voc voltage range: 120V-180V or 96v battery. For 1200W MPPT solar grid tie inverter, 3 kinds of DC input voltage specifications can be selected. 1 PV-voc voltage range: 55V90V or 48V battery. 2 PV-voc voltage range: 80V-125V or 72V battery. 3 PV-voc voltage range:120V-180V or 96V battery. With imported high-speed main control chip and power device to improve system stability. Advanced Maximum power point tracking (MPPT)to ensure the high efficiency of system. Efficiency of MPPT > 99%. Solar modules can be serial/parallel input for easy adjustment of system combination power. High-efficiency and frequency transformer, sufficient patents. Multiple software, hardware system protection, advanced modular design, safe and reliable. LCD rich content display function, user interface, clear and intuitive. Lightweight, easy to install, operate and maintain. Supports access to various DC sources for discharge and can be used as energy-saving. Support RS-485 communication function, data transmission and remote control to operate. How to connect the sensor? Conect the RS485 cable of the AC power acquisition meter to the 485 port of the inverter. Plug the connection terminal of the transmitted current sensor into the port of the collector “CT-IN” (no +-). Connect the AC power supply port “AC-IN” of the collector to the same AC power supply for the load. After the connection, it will light up. In the inverter LCD, enter the “battery grid connection”, through the SET {Bat AutoLimit Grid}. Connect the inverter to AC power first, then connect the battery, the inverter will automatically output the same power as the power detected by the collector. Therefore, the inverter will not have excess electricity to be sent to the grid (ie: automatic limiter function). One acquisition meter can connect 5 unit grid tie inverter. Our goal is to provide hige quality product with competitive prices and excellent customer service to our buyers. We will work with you are satisfied. Please give us the oppotunity to resolve any problems. We will try our best to solve any dispute and satisfy our customers. 100 % Satisfaction Guaranteed. I think you will understand the situation and wait patiently. Please make sure to provide to the correct address and postal code when placing an order. We will try to solve any dispute and try our best to satisfy, is you are not satisfying our product, please contact firsa. To visit my store. THANK YOU FOR VISITING. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “rajeewlakthilin0″ and is located in this country: CN. This item can be shipped worldwide.

Colour: 01
Input Voltage: PV 26-45V(24V BAT)
Output Voltage: 180V-260VAC50HZ60HZ
Socket Type: LCD 1200W
Size: See description
Current Rating: See description
Color: As show
Inverter Technology: Microinverter
Model: GTN-1000/ GTN-1200
Country/Region of Manufacture: China
Item Length: See description
Wattage: See description
Protection Properties: See description
Current Type: AC/DC
System Configuration: Grid-Tie
Product Line: Inverter
Power: See description
Current Output: 90V-140Vac or 180V -260Vac
Brand: Unbranded
Application: Agriculture/Farming, Electronics, Home/Garden
Charging Mode: MPPT (Maximum Power Point Tracking)
Power Source: Solar
Type: Charger/Inverter
Resistance Properties: See description, Dustproof, Dust Resistant, Waterproof, Water Resistant
Features: See description
Voltage: See description

Category: inverter | Comments Off

June 1

Solar Grid Tie Inverter 1000W DC24V 48V 72V AC110V AC220V Discharge Auto-Limit

1200W 1000W Grid Tie Inverter with Limiter Sensor and Battery Discharge Power Mode DC 24V 48v 72v 96v to AC110V 230V 50hz 60hz. With imported high-speed main control chip and power device to improve system stability. Advanced Maximum power point tracking (MPPT)to ensure the high efficiency of system. Efficiency of MPPT > 99%. Solar modules can be serial/parallel input for easy adjustment of system combination power. High-efficiency and frequency transformer, sufficient patents. Multiple software, hardware system protection, advanced modular design, safe and reliable. LCD rich content display function, user interface, clear and intuitive. Lightweight, easy to install, operate and maintain. Supports access to various DC sources for discharge and can be used as energy-saving. Support RS-485 communication function, data transmission and remote control to operate. How to connect the sensor? Conect the RS485 cable of the AC power acquisition meter to the 485 port of the inverter. Plug the connection terminal of the transmitted current sensor into the port of the collector “CT-IN” (no +-). Connect the AC power supply port “AC-IN” of the collector to the same AC power supply for the load. After the connection, it will light up. In the inverter LCD, enter the “battery grid connection”, through the SET {Bat AutoLimit Grid}. Connect the inverter to AC power first, then connect the battery, the inverter will automatically output the same power as the power detected by the collector. Therefore, the inverter will not have excess electricity to be sent to the grid (ie: automatic limiter function). One acquisition meter can connect 5 unit grid tie inverter. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “abdhas-1025″ and is located in this country: IL. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.

Color: 1000W with limiter
Input Voltage:: PV 26-45V(24V BAT)
Output Voltage: AC 220V -240V
Origin: CN(Origin)
System Configuration: Grid-Tie
Output Power: 1 – 200KW
Output Current: 5A-10A
display: LCD display
Certification: CE
Weight: 5KG
Brand: Snaterm
Current Type: DC
compatible: Solar panels or battery
Type: Charger/Inverter
Application 2: work for Solar panel. battery, battery discharge ,power
Application 1: work for solar panel. battery, battery discharge
Output wave: Pure Sine Wave
Voltage: 110V-120V or 220V -240V
is_customized: Yes
Output Frequency: 50HZ/60HZ(45-53Hz or 55Hz-63Hz)

Category: solar | Comments Off

May 16

Solar Inverter Grid Tie Converter DC24V 48V 72V AC110V AC220V Limiter Sensor

Solar Inverter Grid Tie Converter DC24V 48V 72V AC110V AC220V Limiter Sensor. 1000w solar grid tie inverter, 5 kinds of DC input voltage specifications can be selected. 1 PV-voc voltage range: 26V45V or 24v battery. 2 PV-voc voltage range: 40V-60V or 36v battery. 3 PV-voc voltage range: 55V-90V or 48v battery. 4 PV-voc voltage range: 85V-130V or 72v battery. 5 PV-voc voltage range: 120V-180V or 96v battery. For 1200W MPPT solar grid tie inverter, 3 kinds of DC input voltage specifications can be selected. 1 PV-voc voltage range: 55V90V or 48V battery. 2 PV-voc voltage range: 80V-125V or 72V battery. 3 PV-voc voltage range: 120V-180V or 96v battery. How to connect the sensor? Connect the RS485 cable of the AC power acquisition meter to the 485 port of the inverter. Plug the connection terminal of the transmitted current sensor into the port of the collector “CT-IN” (no +-). Connect the AC power supply port “AC-IN” of the collector to the same AC power supply for the load. After the connection, it will light up. In the inverter LCD, enter the “battery grid connection”, through the SET {Bat AutoLimit Grid} for Y 4. Connect the inverter to AC power first, then connect the battery, the inverter will automatically output the same power as the power detected by the collector. Therefore, the inverter will not have excess electricity to be sent to the grid (ie: automatic limiter function). 3 PV-voc voltage range:120V-180V or 96V battery. There may be some delays due to flight, holiday, weather, local post, local natural disaster impact. It must also be in the original packaging. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “gintarelis-7″ and is located in this country: CN. This item can be shipped worldwide.

Color: 1.2KW with WI-FI
Input Voltage: PV 55-90V(48V BAT)
Output Voltage: 90-140Vac 50hz60hz
System Configuration: Grid-Tie
Current Type: DC
Brand: Unbranded
Current Output: Standard
Type: Charger/Inverter
Voltage: Dc24v 48v 72v Ac110v Ac220v
Current Rating: Standard
Features: All Daylight Conditions
Charging Mode: MPPT (Maximum Power Point Tracking)
Resistance Properties: Other
Application: Home/Garden
Power: Standard

Category: solar | Comments Off

May 13

Grid Tie Inverter MPPT WIFI Pure sine DC24V 48V 72V AC110V AC220V Limiter Sensor

GRID TIE INVERTER MPPT WIFI PURE SINE DC24V 48V 72V AC110V AC220V LIMITER SENSOR. Solar grid tie inverter, 5 kinds of DC input voltage specifications can be selected. 1 PV-voc voltage range: 26V45V or 24v battery. 2 PV-voc voltage range: 40V-60V or 36v battery. 3 PV-voc voltage range: 55V-90V or 48v battery. 4 PV-voc voltage range: 85V-130V or 72v battery. 5 PV-voc voltage range: 120V-180V or 96v battery. For 1200W MPPT solar grid tie inverter, 3 kinds of DC input voltage specifications can be selected. 1 PV-voc voltage range: 55V90V or 48V battery. 2 PV-voc voltage range: 80V-125V or 72V battery. 3 PV-voc voltage range: 120V-180V or 96v battery. How to connect the sensor? Conect the RS485 cable of the AC power acquisition meter to the 485 port of the inverter. Plug the connection terminal of the transmitted current sensor into the port of the collector “CT-IN” (no +-). Connect the AC power supply port “AC-IN” of the collector to the same AC power supply for the load. After the connection, it will light up. In the inverter LCD, enter the “battery grid connection”, through the SET {Bat AutoLimit Grid}. Connect the inverter to AC power first, then connect the battery, the inverter will automatically output the same power as the power detected by the collector. Therefore, the inverter will not have excess electricity to be sent to the grid (ie: automatic limiter function). One acquisition meter can connect 10 unit grid tie inverter. There may be some delays due to flight, holiday, weather, local post, local natural disaster impact. It must also be in the original packaging. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “gintarelis-7″ and is located in this country: CN. This item can be shipped worldwide.

Color: 1000W with WI-FI
Input Voltage: PV 26-45V(24V BAT)
Output Voltage: 90-140VAC 50hz60hz
System Configuration: Grid-Tie
Current Type: DC
Brand: Unbranded
Current Output: Standard
Type: Grid Tie Inverter
Voltage: Standard
Current Rating: Standard
Features: Durable
Charging Mode: MPPT (Maximum Power Point Tracking)
Resistance Properties: Dustproof
Application: Home/Garden
Power: Standard

Category: grid | Comments Off

December 2025
M	T	W	T	F	S	S
« Nov
1	2	3	4	5	6	7
8	9	10	11	12	13	14
15	16	17	18	19	20	21
22	23	24	25	26	27	28
29	30	31