May
23
Charging My Battery From Almost Anywhere With This Grid Tie Micro Inverter And The Victron Multiplus
May
22
Adjustable 600W MPPT Solar Grid Inverter DC 24V 36V 48V Battery Discharge Power
MPPT Solar Grid Tie Inverter 500W 600W Pure Sine Wave for PV Input 16-180V or Battery 12-96V Adjustable Power Output. Upgraded the new adjustable power inverter. 1 It adds a solar panel and battery operation mode switch. 2 In battery mode, the knob can switch from 100W to 380W any mobilization. 3 It adds to record each time you turn off the last set of power. PV open voltage range. PV MAX input power(W). MPPT Voltage range(V). Suitable for Battery voltage(V). Battery Low Voltage Protection(V). PV mode AC MAX output (W). Battery mode Max output power. 220VAC(190-260VAC) or 120VAC(90-135VAC). 50Hz(4852) or 60Hz(5862). Stable real efficiency / 120V. Stable real efficiency / 220V. Islanding; Short-circuit; Low Voltage; Over Voltage; Over temperature Protection. Monocrystalline, polycrystalline, thin-film solar panels. 22.2×16.2×6.5CM. PV grid-connected inverter operating mode. The grid-tied inverter has an automated working order, without needing to monitor. On detection the power output from solar panels, device will decide if the power was large enough to begin the conversion process. Coversion process includes 5 modes, Startup, Grid-tied begin, Standby, Stop, Fault-find. Startup – When the start button is on, solar panel and grid lines both connected in normal condition, inverter enters working condition. Grid-tied begin – Grid-tied begin mode is when inverter starts to convert the Direct Current fed through from PV solar panel to a stable Alternate Current and flow to the utility grid. To enable the maximum output of energy, the device uses MPPT control technology to track sun rays, this technology promises the maximum efficiency under diferent daylight and temperature conditions. Standby – Standby mode is when device detects insufficient power feeding through from the solar panel, or device detects abnormal status such as voltages, frequencies, and temperatures not in the permitted range, the device enters standby mode. Stop – Insufficient sunlight hence insufficient PV power feeding through to the device and device enters into the standby mode, when this condition continues and DC voltages falls below 12V for over 1 minute, the device will enter Stop mode. When error ocurs, fault find indicator starts flashing, device will enter Stop mode. Please see 3.4 error status on LED indicator. Battery (battery) power output adjustment mode. The adjustable knob on the inverter to the right twist, Battery power adjustment mode opens, The right of the blue LED light on, At this point the PV inverter MPPT tracking function automatically turns off, Low output machine output power of about 100W, the adjustable knob slowly twist to the right, with the output power gradually increases, the limited battery adjustable maximum output power of about 75% of the total power of the inverter (for example, 500W inverter defined variable will be around 370W, 600W inverter will be limited to 450W). When the inverter is connected to the battery discharge the battery voltage is too low, The inverter will automatically stop to protect the battery output voltage is not too low, At this point you can not cut off the DC line between the inverter and battery, You can use other independent solar charge controller to the battery charge, When charging the battery is full, When 26 42V inverter connected to 24V battery:The inverter will automatically start and the net output (for example, Battery voltage into about 21V, the machine will automatically shut down, this time with another charge controller to the battery charge, When charged to about 25V, the machine will automatically begin to work), Charging without human intervention. Battery (battery) mode, a plurality of sub-voltage specifications in the following table. Battery Low voltage protection. Battery high voltage protection. Include extra charges for remote area listed by Express companies. All return products should be in original package with all accessories included. We stand behind our products so you are always covered! This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “tricorpower” and is located in this country: CN. This item can be shipped worldwide.
- Input Voltage: PV 50-90V Bat 60V
- Output Voltage: 110-120V
- Current Output: 10 A or Less
- System Configuration: Grid-Tie
- Maximum Input Power: 501-600 W
- Power Source: Solar
- Maximum Input Voltage: 161-180 V
- Inverter Technology: Microinverter
- Custom Bundle: No
- Color: Black
- Wattage: 500-599 W
- Current Rating: 1-5 A
- Brand: AFC
- Current Type: AC/DC
- Type: Charger/Inverter
- Connector Type: MC4
- Model: ADJ-600W
- Recommended Environment: Indoor/Outdoor
- Country/Region of Manufacture: China
- Charging Mode: MPPT (Maximum Power Point Tracking)
- Protection Properties: Anti-island Protection, Lightning Protection, Low Voltage Protection, Overcharge Protection
- Power: 501-600 W
March
3
Pano Mag Install Ng Solar Panel Basic Setup Ng Grid Tie Inverter With Limiter No Battery
February
9
1200w Grid Tie Inverter With Limiter Sensor And Battery Discharge Power Mode
1200w Grid Tie Inverter With Limiter Sensor And Battery Discharge Power Mode Dc. 1200W solar inverter with limiter Sensor, for battery discharge or grid tie inverter dc48v 72v ac110v 220v 230v 240v grid tied inverter work with battery with limiter or work with solar panels with limiter function three kinds of DC input voltage specifications can be selected 1 PV-voc voltage range: 55V90V or 48V battery 2 PV-voc voltage range: 80V-125V or 72V battery 3 PV-voc voltage range:120V-180V or 96V battery 1200w Grid Tie Inverter for Solar Panels or Battery – working well with Battery with limiter –with power acquisition meter(one acquisition meter can connect 5 inverters) — Limiter sensor clamp –woking well with sloar panels with limiter, PV Input voltage Range (optional): PV Voc range: 1.26V-45V (for 24V battery) 2.40V-60V (for 36V battery) 3.55V-90V (for 48V battery or 60V Battery) 4.85V-130V (for 72V battery) 5120V-180V(for 96V battery) –Output Voltage : AC 110V 120V 220V 230V 240V Product description : How to connect the sensor? Conect the RS485 cable of the AC power acquisition meter to the 485 port of the inverter. Plug the connection terminal of the transmitted current sensor into the port of the collector “CT-IN” (no +-) 3. Connect the AC power supply port “AC-IN” of the collector to the same AC power supply for the load. After the connection, it will light up. In the inverter LCD, enter the “battery grid connection”, through the SET {Bat AutoLimit Grid} for Y 4. Connect the inverter to AC power first, then connect the battery, the inverter will automatically output the same power as the power detected by the collector. Therefore, the inverter will not have excess electricity to be sent to the grid (ie: automatic limiter function) 1200W Grid tie inverter with limiter 3 kind different specifications for 3 kind DC input solar panels or batteries, please choose the right one Parameter. 1200W (4 kinds of DC input voltage specifications). PV module maximum input power (W). MPPTworking voltage range (V). Battery start voltage can be set range (V). Battery under voltage shutdown voltage can be set range (V). Maximum operating protection current (A). AC output parameters (AC110 / AC220). AC maximum output power (W). Battery mode can set the output power (W). Maximum inverter conversion efficiency. Night standby power consumption. Color LCD (Chinese / English switchable display). DC overvoltage / overcurrent; AC overvoltage / overcurrent / over frequency; over temperature protection. Packing size (l X w X h mm). Natural cooling + fan. Monocrystalline components, polycrystalline components, amorphous, thin film, lead-acid batteries, lithium batteries, switching power supplies, chargers, etc. According to customer requirements to adjust or selected. Product show: Installation and Connection packing List A. Solar Grid Inverter with Limiter B. AC power acquisition meter C. Limiter sensor clamp D. AC cable 50cm E. Installation and operation manual (English) Why we produced the GRID TIE INVERTER WITH LIMITER? It is in response to the overwhelming clamor from our customers for a product that can control the amount of power that the grid tie inverters (GTI) can generate so that the amount of excess power produced by the solar panels are reduced to insignificant levels, if not eliminated — because in some countries, the producer pays for the excess power it gives to the distribution grid. This is because the electric power meters (the one provided by the electricity provider in the area) are not aware of the direction of power flow. In other words it only adds even if power is exported to the grid, thus, the consumers will be charged for power even if it is given to the grid, and this is the problem This is the 2nd generation grid tie inverter with limiter. This is the second generation grid-connected inverter with limiter. With the second generation GTN-LIM, we added a acquisition meter. The collecting meter collects the power consumption of the load through the sensor, and then transmits it to the inverter through the RS-485 port. The inverter will output the corresponding power to the grid, which we call an external power acquisition. The product came very well packaged. I’m very happy. Thank you for everything. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “captainziv” and is located in this country: CN. This item can be shipped worldwide.
- Color: LCD1.2KW NO Limiter
- Input Voltage: PV 55V-90V 48V BAT
- Output Voltage: AC 220V-240V
- Origin: Mainland China
- Current Output: 10 A or Less
- System Configuration: Grid-Tie
- Output Power: 1 – 200kw
- Output Type: Single
- Output Current: 5a-10a
- Brand: Unbranded
- Type: Charger/Inverter
- Current Type: DC
- Features: Auto-limit Function
- Charging Mode: MPPT (Maximum Power Point Tracking)
- Is_customized: Yes
- Application: Work For Sloar Panel. Battery, Battery Discharge
- Output Frequency: 50hz/60hz(45-53hz Or 55hz-63hz)
January
28
SMA SBS5.0-US-10 Sunny Boy 5.0-US Standard Storage Battery Inverter
SMA SBS5.0-US-10 Sunny Boy 5.0-US Standard Storage Battery Inverter. The Sunny Boy Storage battery inverter has been precisely engineered to serve as the intelligent interface between PV, the electrical grid and industry-leading high-voltage batteries. Its AC coupled architecture enables installation at any point in time, providing greater flexibility and giving installers the opportunity to generate new business with existing customers. Along with its ability to address the large retrofit market of existing PV systems, it also delivers the most costeffective, versatile and innovative residential storage solution available. Additionally, up to 2000 W of convenience power can now be achieved in the event of a grid outage during both day and night thanks to SMA’s proprietary Backup Lite feature. Whole home backup is also available with the SMA Automatic Backup Unit. AC coupled for new PV systems or retrofitting existing systems. Compatible with many leading high-voltage batteries. Quick and easy installation. Multiple configuration options with the ability to expand. High level of system integration provides unmatched monitoring and control. Three separate DC inputs allow for maximum power and energy capacity. Backup power options for whole home or protected loads. Solutions for energy management, zero export, and demand charge avoidance. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “stellavolta” and is located in this country: US. This item can be shipped to United States, Canada.
- Brand: SMA
- Power Source: Solar
- Maximum Input Voltage: 100 VDC
- Inverter Technology: String
- Voltage: 600 VDC
- Custom Bundle: No
- Model: Sunny Boy Storage
- Wattage: 5000 w
- Recommended Environment: Indoor/Outdoor
- MPN: SBS5.0-US-10
- Power: 5000 W
- Product Line: SMA Sunny Boy
January
27
Tesla Powerwall Vs Enphase Iq Battery 2023 Updated
January
22
Solar Grid Tie Inverter 1000W MPPT Panels Battery Discharge On Grid Connected
Solar Grid Tie Inverter 1000W MPPT Panels Battery Discharge On Grid Connected. The V6.1 version cancelled the EXTERNAL port. We will randomly send the V5.1 version and V6.1 version. The other functions and performances of the improved product are the same as those before the improvement. After the product is improved, it will be more convenient for users to use the product. The products modified include the SUN-2000G2, SUN-1000G2 of solar inverter and SUN-2000G2-WAL(WDL) and SUN-1000G2-WAL(WDL) of wind inverter. Packing Iist: Inverter—1pcs; Clamp Sensor with 2m cable—1pcs; Power Cable—1pcs English Manual–1pcs. Wifi Port for MPPT 1000W/2000W NEW SUN Solar Grid Tie Inverter. NOTE : It will be built-in side the inverter. How to use the grid tie inverter? 1 unit inverter installation / more units inverters in parallel. The inverter AC output can be connected in the AC plug of grid in the house. Using Grid Tie Inverter With Limiter Model. 2.1 The Grid Tie Inverter with Limiter delivers only the power needed by the load and prevents delivering excess power hence avoids excess power in going back to the Grid. 2.2 The heart of the Grid Tie Inverter with Limiter is the Limiter Module (LM). The LM continuously sampled the power needed by the load through the current sensor connected after the Main Circuit Breaker. The LM then will process the signal. It then sends signal to Grid Tie Inverter how much power to deliver to the load in real time. 2.3 The user, after installing and connecting the GTIL correctly, need not do anything and the unit will do its work automatically. Installation of GTIL With Internal Limiter 3.1 This installation is not require an additional limiter module, Installation is much easier. Clamp the current sensor cable to the hot wire to measure the current, the internal limiter will auto detect the load power and control the inverter output power, excess power will be well controlled. 3.2 External protective device including dc and ac SPD(Surge protection device), dc and ac breaker, etc is recommended to installed in the system. Limiter Setting on the LCD of the inverter. The GTIL include three working mode. Work as normal GTI without power limitation. Work under Internal limiter mode. Work under External limiter mode. Pls make your setting on the LCD and save it, details setting operation, pls read the GTI manual. 5 Battery Discharge Power Mode New upgraded firmware enable battery or solar limiter current and power model. User can set the maximum output power of inverter, this can make the inverter work at cooler contition as user want and extend the lifespan of the inverter. User can set kick in/off voltage of the inverter which can flexible using with battery bank depend on users mind and can prevent battery bank from over discharged. 6 Limiter Module Specification. Clamp sensor- Max 100A. Clamp sensor signal- 5v AC max mA. DC signal Cable- 5v DC, max mA. Limiter Setting on the LCD of the inverter: The GTIL include three working mode: Work as normal GTI without power limitation. Work under Internal limiter mode Work under External limiter mode, Pls make your setting on the LCD and save it, details setting operation, pls read the GTI manual. There may be some delays due to flight, holiday, weather, local post, local natural disaster impact. It must also be in the original packaging. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “rodonite-7″ and is located in this country: CN. This item can be shipped worldwide.
- Color: No WIFI
- Input Voltage: DC22V-65V
- Output Voltage: 90-230V Auto Sense
- Socket Type: No limiter
- Phase: Single Phase
- System Configuration: Grid-Tie
- Power Source: Solar
- Output Type: Single
- Size: 430*310*160mm
- Custom Bundle: No
- Wattage: Other
- MPN: 2119520315
- Item Length: Standard
- Wire Gauge: Other
- Accessories: AC Power Plugs (optional)
- Current Type: AC/DC
- Voltage: DC22V-65V or 45V-90V
- Features: Zero export
- Output Waveform: Pure Sine Wave
- MPPT Efficiency: 99%
- Output Frequency: 50HZ60HZ
- Output Power: 1000W
- Maximum Input Power: 22-65V or 45-90V
- Maximum Input Voltage: 22-65V or 45-90V
- Inverter Technology: Microinverter
- Brand: Unbranded
- Type: Charger/Inverter
- Connector Configuration: Other
- Model: 2119520294
- Recommended Environment: Indoor/Outdoor
- Country/Region of Manufacture: China
- Charging Mode: MPPT (Maximum Power Point Tracking)
- Resistance Properties: Other
- Application: Agriculture/Farming, Electronics, Home/Garden
- Power: 1000W
- Product Line: Solar Grid Tie Inverter 1000W MPPT Panels Battery Discharge
January
20
GTI1000W Grid Tie Inverter Pure Sine Wave For 36V Solar Panel & 36V Battery
Description This grid tie inverter can effectively convert sunlight into clean green energy. It uses imported industrial electronic components, innovative MPPT technology and an isolated high-frequency transformer to make the efficiency higher than 99%, which is a more responsive, and higher output efficiency in photovoltaic power generation application systems. Its powerful output can effectively generate electricity for you. Key Features High-quality Material: The grid tie inverter is made of aluminum alloy, which is rust-free, heat-resistant, cold-resistant and anti-corrosion. It also uses imported industrial electronic components, which you can use for a long time. Environmental-friendly Choice: This grid tie inverter converts the direct current generated by the solar panel into alte. GTI1000W Grid Tie Inverter Pure Sine Wave For 36V Solar Panel & 36V Battery. Solar Micro Inverter 1000W Grid Tie MPPT Pure Sine Wave DC to AC for 36V. This grid tie inverter can effectively convert sunlight into clean green energy. High-quality Material: The grid tie inverter is made of aluminum alloy, which is rust-free, heat-resistant, cold-resistant and anti-corrosion. Environmental-friendly Choice: This grid tie inverter converts the direct current generated by the solar panel into alternating current, providing an environment-friendly and pollution-free continuous energy source. High Efficiency: The product adopts a unique circuit design, imported industrial electronic components, isolated high-frequency transformer, and unique MPPT technology, with efficiency greater than 99%, so it can achieve sensitive response and more stable maximum power point locking. Pure Sine Wave: The grid tie inverter provides the same clean and pure sine wave output as the power supply. It can better protect sensitive devices, provide stronger driving ability, and lower power consumption. Electrical Isolation: The complete electrical isolation of machine output and input makes the entire power distribution system well-insulated, and the use of a fully isolated step-up circuit makes its use safer and more reliable. Safe and Secure: This product has a great electrical protection function. And the sturdy aluminum alloy shell can better prevent rainwater from eroding the surface, dropping and collision, so you can use it with confidence. Flexible Installation: The grid tie inverter adopts the modular design of parallel components, so you can conduct distributed installation according to your specific needs. Excellent Cooling Capacity: It is equipped with a high-speed intelligent cooling fan. When the temperature exceeds 45? /113°F, it will automatically start to work to prevent the inverter from overheating. Small Floor Space: The size of this grid tie inverter is only 10.66.52.1inch, which does not occupy much space and can even be installed in small stores. High Security: This grid tie inverter has passed the professional CE and RoHS certifications. In addition, it also has some core technology patents for electronic circuit design, appearance design and so on. Therefore, it is a trustworthy product. Simple Structure: Its structure is simple. Therefore, you only need to clean the dust on the grid tie inverter without disassembly and reassembly. Gaskets: The inverter is equipped with two gaskets to help you install the photovoltaic support, making the inverter more stable. Heat Dissipation Holes: The body has multiple heat dissipation holes, which help the machine to dissipate heat and enable it to run smoothly. It is very suitable for grid-connected power generation in schools, power stations and households. It is applicable to 36V solar panel and 36V battery. AC Output Power:1000W. Maximum AC Output Power:1050W. AC Output Voltage: 110V(AC 90V-140V). DC Input: DC 20V-50V. Frequency Range: 48- 62Hz(Self-adaption). Scope of Application: 36V Solar Panel and 36V Battery. Package Size: 352010cm/13.87.93.9in. Product Size: 2116.55.3cm/10.66.52.1in. Gross Weight: 4kg/8.8lbs. Net Weight: 3.5kg/7.7lbs. 1 Set English Manual. All Accessories for Assembly. Please note that the input and output voltage must be within the voltage range of the product. Please note that the output port of the inverter must be connected to the household power grid socket (civil single-phase power grid) through an AC power line so that the product can work normally! Please note that the PV input power is recommended to be greater than 20% of the rated power of the product. Please note that the Vmp of the solar panel must be within the MPPT range to ensure the best MPPT maximum power output. We recommend using 36V photovoltaic panels (VOC voltage between 26-50V) or 36V batteries as input power to obtain better output power. Please note that the DC terminal must be tightened, otherwise, the product may be damaged. Please note that the grid tie inverter cannot be used as off grid/stand alone solar system. The output needs to be connected to the grid power. And it can not supply power directly to the AC loads. Please read the operating manual completely before use. And pay particular attention to the safety instructions included. Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “wupengzione” and is located in this country: US. This item can be shipped to United States.
- Custom Bundle: No
- Current Type: AC/DC
- Features: Corrosion Resistant, All Daylight Conditions
- Application: Home/Garden, Agriculture/Farming, Commercial, Irrigation
- Charging Mode: MPPT (Maximum Power Point Tracking)
- Power Source: Solar
- Inverter Technology: Microinverter
- Color: Silver
- Recommended Environment: Indoor/Outdoor
- System Configuration: Grid-Tie
- Type: Charger/Inverter
- Model: GTI1000W
- Resistance Properties: Abrasion Resistant, Chemical Resistant, Corrosion Resistant
- AC Output Power: 1000W
- Material: Aluminium Alloy
- Maximum AC Output Power: 1050W
- AC Output Voltage: 110V(AC 90V-140V)
- DC Input: DC10.8V-32V
- Frequency Range: 48-62Hz(Self-adaption)
- MPPT Range: 15.5-22V
- Scope of Application: 36V Solar Panel and 36V Battery
- Size: 21*16.5*5.3cm/10.6*6.5*2.1in
- Brand: Unbranded
January
9
(GMI500W-AC110V)DC To AC Grid Tie Micro Inverter Power Battery
Purpose: The solar micro inverter is a device that converts the solar panel DC to AC, with small volume and capacity, and is commonly used in small solar systems. High Conversion Efficiency: This highest conversion efficiency of this micro inverter is 92 percent, which can be well converted and has strong practicability. Multiple Protection: The grid connected micro inverter has island protection, voltage protection, frequency protection, temperature protection, current protection and other protection methods, which is safe to use. Aluminum Alloy Material: This solar micro inverter is made of premium aluminum alloy material, which has a sturdy structure and can be used for a time. Temperature Resistant: The DC to AC micro inverter can work at minus 40celsius degree and plus 65 celsius degree, which can meet the needs of daily use. Item Type: Micro inverter Material: Aluminium alloy Weight: Approx. 910g/32.1oz Product Size: 27×10.7x4cm/10.6×4.2×1.6in Photovoltaic Output: Number of Multi Contact 4 Connectors at Input End: 1 set(Group) Maximum Power Point Tracking Range: 24V-40V Working Voltage Range: 18V-50V Maximum DC Input Voltage: 50V Starting Voltage: 18V AC Output: Single Phase Power Grid Type: 120V, 230V Rated AC voltage: 120VAC, 230VAC Output Voltage Range: 120VAC: 80V-160V, 230VAC: 180V-280V Rated AC Frequency: 50Hz, 60Hz Output Frequency Range: 50Hz: 47.5Hz-52.5Hz, 60Hz: 57.5Hz-62.5Hz Output Power Factor: > 0.99 Efficiency: Maximum Conversion Efficiency: 92% CEC Weighted Efficiency: 120VAC: 90%, 230VAC: 90.5% Tracking Efficiency: 99.9% Night Loss. This equipment is a grid connected micro inverter. To make it work normally, it must be connected to the grid. The grid works normally. When the grid stops working, it will also stop generating electricity. The positive and negative poles of the solar panel shall not be reversed. If you extend the solar panel cable, you should be careful about this problem. Avoid direct sunlight and rain during installation. (Keep ventilated, dry and cool). The voltage of the photovoltaic panel shall not exceed the maximum input voltage of the solar grid connected inverter. Our listing price includes the value of goods, packaging cost, and export. Please check with your country’s. We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. Post a message again because sometimes our message system may block some emails. If you are satisfied with our service, pls. Our aim is to provide Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy. We will do our up most to exceed your expectations in customer service, communication and dispatching of your orders. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “super_stylish365″ and is located in this country: CN. This item can be shipped worldwide.
- Brand: Unbranded
- UPC: 646539879771
- EAN: 7051488773552
December
30
Solar Grid Tie Inverter MPPT Pure Sine Wave PV Input Battery Adjustable Power
Solar Grid Tie Inverter MPPT Pure Sine Wave PV Input Battery Adjustable Power. Upgraded the new adjustable power inverter. 1 It adds a solar panel and battery operation mode switch. 2 In battery mode, the knob can switch from 100W to 380W any mobilization. 3 It adds to record each time you turn off the last set of power. PV open voltage range. PV MAX input power(W). MPPT Voltage rangeV. Suitablefor Battery voltage(V). Battery Low Voltage Protection(V). MAX adjustable power(W). MIN adjustable power(W). PV mode AC MAX output W. Battery mode AC output power. 220VAC(185-250VAC) or 120VAC(90-140VAC). 50Hz(4852) or 60Hz(5862). Stable real efficiency / 120V. Stable real efficiency / 220V. Islanding; Short-circuit; Low Voltage; Over Voltage; Over temperature Protection. Monocrystalline, polycrystalline, thin-film solar panels. 22.2×16.2×5.5CM. Packaged separately cartonLxWxH. MPPT Voltage range(V). PV grid-connected inverter operating mode. The grid-tied inverter has an automated working order, without needing to monitor. On detection the power output from solar panels, device will decide if the power was large enough to begin the conversion process. Coversion process includes 5 modes, Startup, Grid-tied begin, Standby, Stop, Fault-find. Startup – When the start button is on, solar panel and grid lines both connected in normal condition, inverter enters working condition. Grid-tied begin – Grid-tied begin mode is when inverter starts to convert the Direct Current fed through from PV solar panel to a stable Alternate Current and flow to the utility grid. To enable the maximum output of energy, the device uses MPPT control technology to track sun rays, this technology promises the maximum efficiency under diferent daylight and temperature conditions. Standby – Standby mode is when device detects insufficient power feeding through from the solar panel, or device detects abnormal status such as voltages, frequencies, and temperatures not in the permitted range, the device enters standby mode. Stop – Insufficient sunlight hence insufficient PV power feeding through to the device and device enters into the standb mode, when this condition continues and DC voltages falls below 12V for over 1 minute, the device will enter Stop mode. When error ocurs, fault find indicator starts flashing, device will enter Stop mode. Please see 3.4 error status on LED indicator. Battery (battery) power output adjustment mode. The adjustable knob on the inverter to the right twist, Battery power adjustment mode opens, The right of the blue LED light on, At this point the PV inverter MPPT tracking function automatically turns off, Low output machine output power of about 100W, the adjustable knob slowly twist to the right, with the output power gradually increases, the limited battery adjustable maximum output power of about 75% of the total power of the inverter (for example, 500W inverter defined variable will be around 370W, 600W inverter will be limited to 450W). When the inverter is connected to the battery discharge the battery voltage is too low, The inverter will automatically stop to protect the battery output voltage is not too low, At this point you can not cut off the DC line between the inverter and battery, You can use other independent solar charge controller to the battery charge, When charging the battery is full, When 26 42V inverter connected to 24V battery:The inverter will automatically start and the net output (for example, Battery voltage into about 21V, the machine will automatically shut down, this time with another charge controller to the battery charge, When charged to about 25V, the machine will automatically begin to work), Charging without human intervention. Battery (battery) mode, a plurality of sub-voltage specifications in the following table. Battery Low voltage protection. Battery high voltage protection. There may be some delays due to flight, holiday, weather, local post, local natural disaster impact. It must also be in the original packaging. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “ginmega” and is located in this country: CN. This item can be shipped worldwide.
- Colour: 500W Adjustable Type
- Input Voltage: PV 26-45V Bat 24V
- Output Voltage: 110Vac(90V-140V)
- Socket Type: USA
- System Configuration: Grid-Tie
- Current Output: Other
- Power Source: Solar
- Inverter Technology: Microinverter
- Size: Standard
- Color: Blue
- Custom Bundle: No
- Current Rating: Other
- Wattage: Other
- MPN: 767098789
- Item Length: Standard
- Brand: Unbranded
- Type: Charger/Inverter
- Current Type: AC/DC
- Voltage: 16-180V
- Model: Other
- Recommended Environment: Indoor/Outdoor
- Features: Durable
- Charging Mode: MPPT (Maximum Power Point Tracking)
- Resistance Properties: Other
- Country/Region of Manufacture: China
- Application: Agriculture/Farming, Aquaculture