Home & Farm Appliances. You may also like. 1000W 1KW Solar on Grid Tie Inverter & Power Limiter DC 22-65V/45-90V PV System. Why we produced the GRID TIE INVERTER WITH LIMITER? It is in response to the overwhelming clamor from our customers for a product that can control the amount of power that the grid tie inverters (GTI) can generate so that the amount of excess power produced by the solar panels are reduced to insignificant levels, if not eliminated — because in some countries, the producer pays for the excess power it gives to the distribution grid. This is because the electric power meters (the one provided by the electricity provider in the area) are not aware of the direction of power flow. In other words it only adds even if power is exported to the grid, thus, the consumers will be charged for power even if it is given to the grid, and this is the problem. This is the 2nd generation grid tie inverter with limiter. But in case customer install inverter far away from the main circuit breaker, we also enable the 2nd GTIL work with stand-alone limiter, we call this-external limiter. For sure, the inverter can work under normal Grid tie-no limit mode, just set on the nice LCD and save your setting. New upgraded firmware enable battery or solar limiter current and power model. User can set the maximum output power of inverter , this can make the inverter work at cooler contition as user want and extend the lifespan of the inverter. User can set kick in/off voltage of the inverter which can flexible using with battery bank depend on users mind and can prevent battery bank from over discharged. Low cost and easy installation–it can make full use of all types of buildings’ surface that face to the sun in the city as well as fast and easy installation of solar modules and grid tie inverter. It just needs very low maintenance costs. Free combination — it can be used as a separate grid tie system and can be setup as a large solar array with many of them. Improving the efficiency of the entire solar power system– Because of MPPT function. So every panel is working at the maximum. 1000W Grid Tie Power Inverter. DC Input Voltage : 22V65V. AC Output Voltage Range. AC Output Frequency Range. 412815.5cm(16.14″11″6.1). DC Input Voltage : 45V90V. 2000W Grid Tie Power Inverter. 51.5x30x15cm(20.3″x11.8″x5.9). How to use the Inverter? Standard Grid Tie Inverter Model(one unit inverter). More than 1 unit inverters stackable. The Grid Tie inverter converts DC power produced by Solar Panels to AC, connects to the grid and feed all of the power available from the panels to the AC load. All excess power that is not needed by the load is then exported to the Grid. If the Grid fails, then the Grid Tie Inverter will turn off. When the Grid comes back on line. The Grid Tie Inverter will again supply power to the load and any excess power is exported to the Grid again. If the Solar Panel is producing less power and the GTI cannot deliver all the power needed by the load, then power will be supplemented by the Grid. Power Meters (Except smart meter) are not aware of the direction of Power flow. The user then pays for the power exported and delivered by the Grid. Using Grid Tie Inverter With Limiter Model. 2.1 The Grid Tie Inverter with Limiter delivers only the power needed by the load and prevents delivering excess power hence avoids excess power in going back to the Grid. 2.2 The heart of the Grid Tie Inverter with Limiter is the Limiter Module (LM). The LM continuously sampled the power needed by the load through the current sensor connected after the Main Circuit Breaker. The LM then will process the signal. It then sends signal to Grid Tie Inverter how much power to deliver to the load in real time. 2.3 The user, after installing and connecting the GTIL correctly, need not do anything and the unit will do its work automatically. Installation of GTIL With Internal Limiter. 3.1 This installation is not require an additional limiter module, Installation is much easier. Clamp the current sensor cable to the hot wire to measure the current, the internal limiter will auto detect the load power and control the inverter output power, excess power will be well controlled. 3.2 External protective device including dc and ac SPD(Surge protection device), dc and ac breaker, etc is recommended to installed in the system. 1 x Solar Grid Inverter with Limiter(built-in). 1 x AC cable. 1 x Internal type Limiter clamp with sensor. 1 x User Manual. Goods in stock in USA, goods will be set by UPS. Or USA customers the most important thing. We strive to serve our customers and resolve any issues. Appreciate the opportunity to correct any issues you have before you leave feedback. Pls visit my store. We do appreciate your consideration and looking forward to doing business with all the clients and companies. We are manufacturers and wholesalers of solar panels and renewable energy products. Our solar business has been established since 2002. OEM and ODM services are both available. We would like to be your best supplier in China. Please take our working time into account. We will reply you in time, if you are in our working time. If you don’t receive our reply within one days, We must be out of work. Please contact me through. Public holidays in China is not available for message reply. The item “1000W 1KW Solar on Grid Tie Inverter & Power Limiter DC 22-65V/45-90V PV System” is in sale since Thursday, November 16, 2017. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “qecosolar” and is located in Rosemead, California. This item can be shipped worldwide.

• Brand: ECO-WORTHY
• MPN: ECO-L03
• MPPT Efficiency: 99%
• Power Factor: 0.99
• Output Wave Form: Pure Sine Wave
• Dimensions (W x H x D) 1KW: 41*28*15.5
• Dimensions (W x H x D) 2KW: 51.5*30*15
• Internal Limiter: Built-in
• Featured Refinements: MPPT
• Input Voltage: 22V-65V or 45V-90V
• Output Voltage: 110V or 220V Auto
• Output Frequency: 45-65Hz
• Standby Power Consumption: <0.5w
• Total Harmonic Distortion: <5%
• Peak Inverter Efficiency: 92%

1000W Solar on Grid Tie Inverter with Power Limiter DC 22-65V/45-90V PV system. Bullet Point 1000W Solar on Grid Tie Inverter with Power Limiter DC 22-65V/45-90V PV system. Item Details: 1000w Solar Power Grid Tie Inverter. With Limiter / Sensor Battery Discharge Power Mode. DC 22V-60V or 45V-90V (optional). AC 110V 120V 220V 230V 240V (auto selected). Why we produced the GRID TIE INVERTER WITH LIMITER? It is in response to the overwhelming clamor from our customers for a product that can control the amount of power that the grid tie inverters (GTI) can generate so that the amount of excess power produced by the solar panels are reduced to insignificant levels, if not eliminated — because in some countries, the producer pays for the excess power it gives to the distribution grid. This is because the electric power meters (the one provided by the electricity provider in the area) are not aware of the direction of power flow. In other words it only adds even if power is exported to the grid, thus, the consumers will be charged for power even if it is given to the grid, and this is the problem This is the 2nd generation grid tie inverter with limiter. But in case customer install inverter far away from the main circuit breaker, we also enable the 2nd GTIL work with stand-alone limiter, we call this-external limiter. For sure, the inverter can work under normal Grid tie-no limit mode, just set on the nice LCD and save your setting. New upgraded firmware enable battery or solar limiter current and power model. User can set the maximum output power of inverter , this can make the inverter work at cooler contition as user want and extend the lifespan of the inverter. User can set kick in/off voltage of the inverter which can flexible using with battery bank depend on users mind and can prevent battery bank from over discharged. Input DC Voltage Range. Peak power tracking voltage. AC Output Voltage Range. Dimensions (W x H x D). Note: there are 22v-60v and 45v-90v input voltage optional, Please choose DC22v-60v or 45v – 90v. Description: a: DC input , for solar panels connection b: Connector for external limiter c: Connector for internal limiter d: AC output , use AC cable to connect to home grid Sensor Clamp. How to use the Inverter? Standard Grid Tie Inverter Model(one unit inverter). More than 1 unit inverters stackable. The Grid Tie inverter converts DC power produced by Solar Panels to AC, connects to the grid and feed all of the power available from the panels to the AC load. All excess power that is not needed by the load is then exported to the Grid. If the Grid fails, then the Grid Tie Inverter will turn off. When the Grid comes back on line. The Grid Tie Inverter will again supply power to the load and any excess power is exported to the Grid again. If the Solar Panel is producing less power and the GTI cannot deliver all the power needed by the load, then power will be supplemented by the Grid. Power Meters (Except smart meter) are not aware of the direction of Power flow. The user then pays for the power exported and delivered by the Grid. Using Grid Tie Inverter With Limiter Model. 2.1 The Grid Tie Inverter with Limiter delivers only the power needed by the load and prevents delivering excess power hence avoids excess power in going back to the Grid. 2.2 The heart of the Grid Tie Inverter with Limiter is the Limiter Module (LM). The LM continuously sampled the power needed by the load through the current sensor connected after the Main Circuit Breaker. The LM then will process the signal. It then sends signal to Grid Tie Inverter how much power to deliver to the load in real time. 2.3 The user, after installing and connecting the GTIL correctly, need not do anything and the unit will do its work automatically. Installation of GTIL With Internal Limiter. 3.1 This installation is not require an additional limiter module, Installation is much easier. Clamp the current sensor cable to the hot wire to measure the current, the internal limiter will auto detect the load power and control the inverter output power, excess power will be well controlled. 3.2 External protective device including dc and ac SPD(Surge protection device), dc and ac breaker, etc is recommended to installed in the system. Limiter Setting on the LCD of the inverter: The GTIL include three working mode:Work as normal GTI without power limitation. Work under Internal limiter mode and Work under External limiter mode, Pls make your setting on the LCD and save it, details setting operation, pls read the GTI manual. 5 Battery Discharge Power Mode New upgraded firmware enable battery or solar limiter current and power model. 6 Limiter Module Specification. Clamp sensor- Max 100A. Clamp sensor signal- 5v AC max mA. DC signal Cable- 5v DC, max mA. Fengefengefenge If the distance of meter and inverter is too long , you will need the External Limiter. Note: The external limiter is not included in package. We are not responsible for undeliverable address. Pleas message us if recipient address changes needed before we fulfill the order. Sorry, no local pickups available. No need return the original one for low-valued items. All return products should be in original package with all accessories included. We stand behind our products so you are always covered! The item “1000W Solar on Grid Tie Inverter with Power Limiter DC 22-65V/45-90V PV system” is in sale since Monday, October 09, 2017. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “chargerangel” and is located in San Jose, California. This item can be shipped to United States.

• Brand: iMeshbean
• MPN: Does Not Apply