1000W Grid Tie Inverter converts DC power produced by Solar Panels to AC, connects to the grid and feed all of the power available from the panels to the AC load. Smart Micro inverter is synchronized and in-phase with the utility grid. If the Solar Panel is producing less power and the GTI cannot deliver all the power needed by the load, then power will be supplemented by the Grid. Why do you need a grid tie inverter with limiter? Because in some countries, Power Meters (the one provided by the electricity provider in the area) are not aware of the direction of power flow. The consumers will be charged for power even if it is given to the grid. Type: L2-1000W-DC22-60V-B Rated Power (Peak/Continuous): 1000W / 900W DC Input Voltage: 22V60V Peak Power Tracking Voltage: 2654V AC Output Voltage Range: 90V140V/190260V Auto Switch Grid Tie Power Inverter starting voltage 26V AC Output Frequency Range: 46Hz65Hz Stackable: Just for AC Output Output Wareform: Pure sine wave Installing Grid Tie Power System involves several key steps: 1. Considering the total capacity of the grid tie power system that you need. Choosing applicable solar panels for Grid Tie Inverter. Selecting accessory for installation of the Grid Tie Power System. Selecting correct model of Sunshine Grid Tie Inverter. Installing solar panels to suitable place. Installing 1000W Grid Tie Inverter to suitable place. Connecting Grid Tie Power System with cables and connectors. Input Requirements? The grid tie inverter DC input 22-60V (startup voltage 26V), Voc (solar panel) must not exceed 60V to ensure good output efficiency, Please ensure that the solar panel power is not less than 200W and check the open-circuit voltage to be between 38-60V (Voc). Battery Power Supply? This DC 22-60V grid tie solar inverter can only be powered by 36V/48V batteries, and when using batteries, please use a circuit breaker, The inverter features a battery discharge power mode that can automatically adjust the depth of discharge for the battery bank. MPPT Technology? The inverter utilizes innovative MPPT technology with an efficiency of up to 99% and a peak conversion rate of 80%. It is necessary to use solar panels of the same specifications, and the inverter comes with a limiter sensor, providing only the power required for the load. The controller wiring should not exceed 66 feet. LCD Display? The LCD screen can display daily power generation, total power generation, real-time grid waveform, real-time solar system voltage and current, real-time power, internal temperature, date, and time. To meet higher power usage requirements, this grid-tie inverter can be stacked, for example, using 4 grid-tie inverters stacked equals 1000W, equivalent to 4000W, with no limit on the number of stacked units. Output Connection Precautions? This grid-tie inverter is only suitable for connecting to the grid output and cannot directly power AC loads. Ensure correct connection of positive and negative terminals and tighten the DC terminals of the inverter to avoid loosening and short circuits. Do not use the solar controller load port to connect to the inverter.