New Wind Power Grid Tie Inverter With Limiter /dump Load Controller 2000w 1000w

2000w 1000w Wind Power Grid Tie Inverter With Limiter /dump Load Controller/resi. 2000W 1000W Wind Power Grid Tie Inverter with Limiter /Dump Load Controller/Resistor for 3 Phase 48v 60v wind turbine generator –Max Efficiency:>92% MPPT Efficiency:99% –3PHASE AC 45V-90V –AC 220V 230V 240V 50hz 60hz NEW 1000W 2000W Wind Power Grid Tie Inverter Max Efficiency:>92% MPPT Efficiency:99% 1. Low cost and easy installation 2. Directly connect to three phase wind turbine 3. Much better output waveform compare with similiar GTI 4. Improving the efficiency of the entire solar power system Overload protection, Anti-island protection Short-circuit protection/Reverse polarity protection 5. AC output voltage and current THD. Input AC/DC Voltage Range. AC Output Voltage Range. Dimensions (W x H x D). (1) (2) Dump load resistor connection Terminal. This terminals will connect to the dump load resistor. (3) AC socket, This socket will connect the inverter to the public grid via the AC cable. This terminals will connect to the wind turbine. Inverter Display Instruction The Inverter display can show many information, The main interface of the display and the icons explainations are show above. The inverter also integrate with internal limiter and external limiter function which can prevent excess power from going to the public grid. Select the internal limiter mode, inverter will work under limiter mode, output power of the inverter will be determined by load power. Select the external limiter mode, inverter need a external limiter module working with it. For more details about the limiter function, pls contact supplier. This function only useful with limiter type inverter. Power View: In this interface, the display shows real time power, PV input voltage, inside temperature, date and time. Clock And Date Setting: Set the clock and date in this page, save the setting before exit. Notes: Save the setting after you reconfigurate the working mode or backlight setting. Notes: Battery Discharge Current Mode And Battery Discharge Power Mode are not developed yet for this wind inverter. Grid Waveform: This interface will show the real time grid waveform. The grid voltage and frequency also will show in this interface. Energy Menu: The energy interface will show the power generation curve everyday. Today KWH and Total KWH are also show in this page. AC Output Current Waveform and PF Test Of 2000W Model Tested 2000W model at nearly full load, Output current waveform shows good pure sine wave in oscilloscope, PF value also shows in good result, 99.8% PF value. Advanced patented technology, MPPT efficiency is higher. High-quality imported components, more stable quality, lower failure rate. Significantly longer life, more than 10 years. Each inverter need to pass twice testing (20 hours) before leaving factory. Low cost and easy installation. Combination of SGPV does not interact. Improving the efficiency of the entire solar power system. The product came very well packaged. I’m very happy. Thank you for everything. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “best-shopping-with-us” and is located in this country: CN. This item can be shipped worldwide.

Color: Only Inverter
Input Voltage: 3phase Ac 22-65v
Output Voltage: 1000W 90-260VAC
Socket Type: US
Origin: Mainland China
Brand: Unbranded
Type: Charger/Inverter
Current Type: AC/DC
System Configuration: Grid-Tie
Power Source: Wind
Output Type: Single
Output Current: 0-20a
Model Number: Teg-1000g-wal, Teg-2000g2-wal
Is_customized: Yes
Output Frequency: 46hz ~ 65hz

Category: wind | Comments Off

July 23

SWEA Grid Tie Micro Inverter 250 watt with dump load diode box for wind turbine

Hello what we have here is a Lot of 2 SWEA Grid Tie Micro Inverters they are 250 watt and come with dump load and diode box. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “kecha-5608″ and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, Korea, South, Indonesia, Taiwan, South Africa, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Croatia, Republic of, Malaysia, Chile, Colombia, Costa Rica, Panama, Trinidad and Tobago, Guatemala, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Pakistan, Paraguay, Reunion, Uruguay, Dominican Republic, El Salvador.

Current Output: 2.39A
Peak power output: 600W
Power Source: Wind
Min/Max start voltage: 22-50V
Wattage: 600w
MPN: DGIRE00801591703476
Current Type: DC
Voltage: 22-50V
Waterproof rating: IP65
Cooling: Self-cooling
Maximum Input Power: 600W
Maximum Input Voltage: 54V
Recommended input power: 500-600Watt
Inverter Technology: Microinverter
Color: As Shown on the Picture
Current Rating: 40A
Brand: SWEA
Type: Charger/Inverter
Charging Mode: MPPT (Maximum Power Point Tracking)
Gift 3: 1 x Set of Mounting Accessories
Gift 2: 1 x 1.5m Power Cable
Power: 600W
Gift 1: 1 x tee connector
UPC: 8085442590564

Category: swea- | Comments Off

June 8

Wind Grid Tie Inverter Dump Load Resistor MPPT Wifi Function Optional AC Turbine

Wind Grid Tie Inverter Dump Load Resistor MPPT Wifi Function Optional AC Turbine. The Inverter display can show many information, The main interface of the display and the icons explainations are show above. The inverter also integrate with internal limiter and external limiter function which can prevent excess power from going to the public grid. Select the internal limiter mode, inverter will work under limiter mode, output power of the inverter will be determined by load power. Select the external limiter modeplease choose the mode. , inverter need a external limiter module working with it. Limit Mode:External limiter and Internal limiter are settable. Limit mode+External limiter both selected means work under external limiter mode. Limit mode+Internal limiter both selected means work under external limiter mode. LCD back light:Select it, Lcd will always on. Unselect it, Lcd will auto turn off after about 10s without any action on lcd button. Press any of the button to light lcd again. Remote Num:while using with wifi plug for monitoring, set by 1. While using with the WIFI-RTU(one rtu can monitoring multiple inverters), set monitored inverter numbers. Bat or solar limited current mode:This function is usable while using with battery. The setted voltage will be the cut off voltage, this means while battery discharged to the setted voltage point or below setted point, inverter will auto disconnect from the battery and stop operating. This can prevent the battery from over discharged. The setted current means inverter will discharge the battery at this current level. Mppt function of the inverter will auto invalid when working under this setting. Set is 0.1V/step. Set is 0.1V/Step. Battery and solar limited power mode:At this working mode, cut off voltage setting is same as 6.4, and the power setting is the maximum output power of the. The 22-65V type inverter will start up at 25V, and 45-90V type inverter will start up at 49.5V, after start, inverter can still work until 22v or 45v. Current sensor Orientation:Please check the current flow direction arrow on the sensor before use, make sure the connection is correct. Otherwise, inverter will not start up at limit mode. Negative power under AC voltage means power overflow to the grid. Positive means power come from the grid. Wifi Port for MPPT 1000W/2000W NEW SUN Grid Tie Inverter. NOTE : this WIFI port must be ordered with 2nd Generation Grid Tie Inverters together. NOTE : It will be built-in side the inverter. There may be some delays due to flight, holiday, weather, local post, local natural disaster impact. It must also be in the original packaging. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “audosta” and is located in this country: CN. This item can be shipped worldwide.

Color: No WIFI
Input Voltage: 3phase AC22-65V
Output Voltage: AC 185-265V
Socket Type: No Limiter
Size: 322x196x88mm
Current Rating: Other
Inverter Technology: Microinverter
Model: 5175583956
Country/Region of Manufacture: China
Output Type: Single
Custom Bundle: No
Output Waveform: Pure Sine Wave
Phase: Single Phase
Warranty: 1Year
Weight: 5KG
Current Type: AC
System Configuration: Grid-Tie
Power Source: Wind
Type: DC/AC Inverters
Features: Zero export
MPN: 5175583981
Recommended Environment: Indoor/Outdoor
Item Length: Standard
Power: 1000W
Current Output: Other
Brand: Unbranded
Application: Agriculture/Farming, Camping/Hiking, Home/Garden
Charging Mode: MPPT (Maximum Power Point Tracking)
AC Output Voltage: 90-260VAC
DC Input Voltage: 22-65V/45-90V
Efficiency: 92%
Is_customized: Yes
Max.Output Power: 1000W
Output Frequency: 50hz/60hz
Output Power: 1000W
Resistance Properties: Other
Voltage: Other

Category: wind | Comments Off

July 15

1000W Wind Power Grid Tie Inverter With Dump Load Controller/Resistor For 3 Phas

1000W Wind Power Grid Tie Inverter with Dump Load Controller/Resistor for 3 Phase 24v 48v AC DC wind turbine generator SUN. 6 years Store on Aliexpress. For new energy products , we are more professional. NEW 1000W Wind Power Grid Tie Inverter. With dump load controller and resistor. DC/AC 22V-60V / 45V-90V (optional). AC 100V 110V 120V 220V 230V 240V 50hz 60hz. Power Limit Function (optional). Of the 2G Wind Power Grid Tie Inverter. The 2nd Generation grid tie inverter, new technical , Higher efficiency. Higher MPPT efficiency , Max 99%. Multiple intelligent protection to ensure safe use. Directly connect to three phase wind turbine, without regulator. Easy to install and easy to operate. UL1741, IEEE1547, VDE4105 standards. Pure Sine Wave output. Build in dump load function. Power Limit Function optional. Wind Power Grid Tie Inverter System. The Wind Grid Tie Power Inverter is the world’s most technologically advanced inverter for use in utility-interactive applications. This integrated system maximizes energy harvest, increases system reliability, and implifies design, installation and management. The small type wind grid tie power inverter can obtain the wind energy from wind turbine, and can tie to the grid through its output cables with no extra equipment. The installation is very convenient and reliable. We call the system combining with small grid tie inverter and wind turbine as’SGWT’. The system includes wind turbine and small grid tie inverter and installation kit, and some “SGWT” also will include controller, dump load resistor. The inverter can be connected to any outlets of utility grid at house. The small grid tie inverter monitors the volume, frequency and phase of the home utility grid, then produce pure sine wave AC power that the frequency and phase are as same as the grid’s, and the volume is a bit higher than the grid’s, then according to the current controlled PWM, to control the output. Power to the grid. The small grid tie inverter just puts out power when the home grid is on. When the wind turbine is rotating, and the output of the voltage is in the range of the rated input voltage of the inverter, the wind turbine will produces power, and the grid tie inverter will change the power from wind turbine to the home grid. When the total power of electric apparatus that are using in the house is larger than the output power of the inverters, these. Power from the inverters will be consumed in the house, this will slow down the power meter, otherwise, the difference of the output power of the inverter between the total used power of the apparatus will go out from the house to the out grid. Input Voltage Range:22-60vdc/45-90vdc (test point is at the output of the inside rectifier) , Peak power tracking voltage:25-60v/50-90v , Max output power:1000w , Nominal Voltage Range: 95-140v/185-265v , Max Efficiency:>92% , MPPT Efficiency:99%. The power meter will SLOW down. If the wind turbine is producing less power and the GTI cannot deliver all the power needed by the load, then powe will be supplemented by the Grid. Power Meters (Except smart meter) are not aware of the direction of Power flow. The user then pays for the power exported and delivered by the Grid. Now , we have the Power. If you do not want to sell electric power. Input AC/DC Voltage Range. AC Output Voltage Range. Dimensions (W x H x D). 322 x 196 x 88 mm. (1) (2) Dump load resistor connection Terminal. This terminals will connect to the dump load resistor. (3) AC socket, This socket will connect the inverter to the public grid via the AC cable. This terminals will connect to the wind turbine. Wind power grid tie inverter —- 1pcs , 2. Dump load resistor —1pcs , 3. AC cable –1pcs , 4. Selecting correct model of Sunshine Grid Tie Inverter. If the wind turbine is DC output type, then you should choose WDL model inverters, and. The input DC voltage range of the inverter should fit the DC output voltage of the wind. Turbine, the rated power of the inverter should also fit the max. Power of the wind turbine. And the AC output of the inverter should fit the standard of AC utility grid. If the wind turbine is AC output type, then you should choose WAL model inverters. Factories don’t supply the AC rated voltage, just supply DC rated voltage, so our WAL also. Supply the DC input range, please check the DC rated voltage of wind turbine should fit. The DC input range of the grid tie inverter. For 24v – 48v wind turbines , we suggest 22v-65v inverters. For 60v – 90v wind turbines , we suggest 45V-90V inverters. WAL model of grid tie invereter connected with AC output type of wind turbine. Connecting two 1000G2-WAL with a max. Power is 2KW wind turbine. Limiter sonsor and clamp requried. The Limiter function has been built-in. But, there is not limiter sensor/clamp with this product. The function is turned off. If customer want to use limiter function , please order limiter sensor/clamp in the future , or order a limiter model inverter. Limit Model :(no included limit sensor/clamp). External limiter and Internal limiter are settable. Limit mode+External limiter both selected means work under external limiter mode. Limit mode+Internal limiter both selected means work under external limiter mode. About External Limiter (no included in this item). The limiter sensor/clamp cable is 2mters for internal limiter. If the distance of inverter and main braker is longer than 2m , the user will need external type limiter. The distance can be extend to Max 30meters. Certification : CE Rohs EN50438. GAIA NEW ENERGY is your trusted partner for long term business. We arethe R of the solar inverter. We are responsible forthe quality of the inverter. The inverter has 2 years guarantee. All return items must be in their original condition. Please do contact with us for return address, details and any other issues. Learning about the duty policy. Please leave us message if you have any question, we will reply in 24 hours, thank you! For off-grid wind power system , the customer can use battery discharge model solar grid tie inverter with the battery. When the battery is charged full by the charge controller, the battery grid tie inverter can send power to grid. We offer the best prices around on high quality products. Our E-store includes media such as books, movies, music and games while offering electronics, toys, sporting apparel, clothing, tools, general home, garden items and more. We are always working hard to ensure your package arrives as soon as possible. We do not accept P. Please provide a physical address. We try our very best to make sure every customer is completely satisfied. If there’s a problem, message us! We’re happy to help. The item “1000W Wind Power Grid Tie Inverter With Dump Load Controller/Resistor For 3 Phas” is in sale since Sunday, October 25, 2020. This item is in the category “Business & Industrial\Light Equipment & Tools\Generators”. The seller is “nicga-6013″ and is located in China. This item can be shipped to United States.

Manufacturer: Does Not Apply
Model: Does Not Apply
Brand: Does Not Apply
UPC: 7445035536521
EAN: Does Not Apply
MPN: Does Not Apply
Output Type: single
Type: DC/AC Inverters
Brand Name: FIG
Model Number: GAIA-1000G2-WAL-LCD-S
Input Voltage: 22-60vdc/45-90vdc
Output Power: 1 – 200KW
is_customized: Yes
Output Current: 10A
Weight: 4.5kg
Output Voltage: 95-140v/185-265VAC
Stackable: Yes
Size: 322x196x88mm
Output Frequency: 50hz 60hz auto

Category: 1000w | Comments Off

March 6

2000W WIFI Grid Tie Inverter 3phase AC Wind Turbines MPPT Pure Sine Wave Dump

2000W Wind Power Grid Tie Inverter with Limiter /Dump Load Controller/Resistor for 3 Phase 48v 60v wind turbine generator. Max Efficiency:>92% MPPT Efficiency:99%. AC 220V 230V 240V 50hz 60hz. NEW 2000W Wind Power Grid Tie Inverter. Low cost and easy installation. Directly connect to three phase wind turbine. Much better output waveform compare with similiar GTI. Improving the efficiency of the entire solar power system. Overload protection , Anti-island protection. Short-circuit protection/Reverse polarity protection. AC output voltage and current THD. Input AC/DC Voltage Range. AC Output Voltage Range. Dimensions (W x H x D). (1) (2) Dump load resistor connection Terminal. This terminals will connect to the dump load resistor. (3) AC socket, This socket will connect the inverter to the public grid via the AC cable. This terminals will connect to the wind turbine. The Inverter display can show many information, The main interface of the display and the icons explainations are show above. The inverter also integrate with internal limiter and external limiter function which can prevent excess power from going to the public grid. Select the internal limiter mode, inverter will work under limiter mode, output power of the inverter will be determined by load power. Select the external limiter mode, inverter need a external limiter module working with it. For more details about the limiter function, pls contact supplier. This function only useful with limiter type inverter. In this interface, the display shows real time power, PV input voltage, inside temperature, date and time. Clock And Date Setting. Set the clock and date in this page, save the setting before exit. Notes: Save the setting after you reconfigurate the working mode or backlight setting. Notes: Battery Discharge Current Mode And Battery Discharge Power Mode are not developed yet for this wind inverter. This interface will show the real time grid waveform. The grid voltage and frequency also will show in this interface. The energy interface will show the power generation curve everyday. Today KWH and Total KWH are also show in this page. AC Output Current Waveform and PF Test Of 2000W Model. Tested 2000W model at nearly full load, Output current waveform shows good pure sine wave in oscilloscope, PF value also shows in good result, 99.8% PF value. Advanced patented technology, MPPT efficiency is higher. High-quality imported components, more stable quality, lower failure rate. Significantly longer life, more than 10 years. Each inverter need to pass twice testing (20 hours) before leaving factory. Combination of SGPV does not interact. The item “2000W WIFI Grid Tie Inverter 3phase AC Wind Turbines MPPT Pure Sine Wave Dump” is in sale since Saturday, January 30, 2021. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “dennimazozhi0″ and is located in Hong Kong. This item can be shipped worldwide.

Size: 434*196*88mm
Total Harmonic Distortion: <5%
Standby Power Consumption: <0.5W
Output Frequency: 46Hz~65Hz
AC Output Voltage Range: 190VAC ~ 260VAC
ceitifications: CE&ROHS
Model: 2000G2-WAL-LCD
Country/Region of Manufacture: Hong Kong
Custom Bundle: No
Wattage: 2000W
Current Type: AC
System Configuration: Grid-Tie
Material: Aluminium
Shipping: Free
WIFI: YES
Power Source: Wind
Dump: Yes
Type: Charger/Inverter
Features: All Daylight Conditions
Color: Blue
MPN: Does Not Apply
Recommended Environment: Indoor/Outdoor
Protection Properties: Anti-Island Protection
Power: 2000W
Current Output: 0-20a
Brand: Unbranded
Application: connect to three phase wind turbine
Charging Mode: MPPT (Maximum Power Point Tracking)
Weight ( Kg): 6.5kg
Resistance Properties: Dustproof
MPPT Efficiency: 99%
Output Wave Form: Pure Sine Wave
Power Factor: 0.99
Peak Inverter Efficiency: 92%
Voltage: 45V-90V

Category: 2000w | Comments Off

August 18

2000W Wind Power Grid Tie Inverter with Limiter / Dump Load Controller/Resistor

2000W Wind Power Grid Tie Inverter with Limiter / Dump Load Controller/Resistor for 3 Phase 48v wind turbine generator. Features of the 2G Wind Power Grid Tie Inverter. The 2nd Generation grid tie inverter, new technical, Higher efficiency. Higher MPPT efficiency, Max 99%. Multiple intelligent protection to ensure safe use. Directly connect to three phase wind turbine, without regulator. Easy to install and easy to operate. UL1741, IEEE1547, VDE4105 standards. Pure Sine Wave output. Build in dump load function. Wind Power Grid Tie Inverter System. The Wind Grid Tie Power Inverter is the worlds most technologically advanced inverter for use in utility-interactive applications. This integrated system maximizes energy harvest, increases system reliability, and implifies design, installation and management. The small type wind grid tie power inverter can obtain the wind energy from wind turbine, and can tie to the grid through its output cables with no extra equipment. The installation is very convenient and reliable. We call the system combining with small grid tie inverter and wind turbine as SGWT. The system includes wind turbine and small grid tie inverter and installation kit, and some SGWT also will include controller, dump load resistor. The inverter can be connected to any outlets of utility grid at house. The small grid tie inverter monitors the volume, frequency and phase of the home utility grid, then produce pure sine wave AC power that the frequency and phase are as same as the grid’s, and the volume is a bit higher than the grid’s, then according to the current controlled PWM, to control the output. Power to the grid. The small grid tie inverter just puts out power when the home grid is on. When the wind turbine is rotating, and the output of the voltage is in the range of the rated input voltage of the inverter, the wind turbine will produces power, and the grid tie inverter will change the power from wind turbine to the home grid. When the total power of electric apparatus that are using in the house is larger than the output power of the inverters, these. Power from the inverters will be consumed in the house, this will slow down the power meter, otherwise, the difference of the output power of the inverter between the total used power of the apparatus will go out from the house to the out grid. Input AC/DC Voltage Range. AC Output Voltage Range. Dimensions (W x H x D). 469 x 196 x 88 mm. The item “2000W Wind Power Grid Tie Inverter with Limiter / Dump Load Controller/Resistor” is in sale since Thursday, May 16, 2019. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “premiumbusiness” and is located in CH. This item can be shipped worldwide.

Output Power: 1 – 200KW
Output Type: Single
Output Voltage: 185-265VAC
Size: 469x196x88mm
Stackable: Yes
Model: 001
Modified Item: No
Country/Region of Manufacture: China
Custom Bundle: No
Weight: 5.9kg
Input Voltage: 45-90vdc
Is_customized: Yes
Output Current: 10A
Output Frequency: 50hz 60hz auto
Type: DC/AC Inverters
MPN: 2000WWind001
Brand: 2000W Wind China
Voltage: 48

Category: 2000w | Comments Off

July 18

Grid Tie Inverter 1KW MPPT Pure Sine Wave Dump Load for 3 Phase AC Wind Turbine

Wind power grid tie inverter. 1000W with LCD & dump load resistor. 22-60V DC to 110V AC. MPPT Pure Sine Wave Grid Tie Power Inverter with built-in rectifier for AC wind turbine generator grid tie systems. The unit has an integrated rectifier inside the inverter, the inverter can directly connect to the three phase wind turbine with no need to connect AC to DC controller between the wind turbine and the inverter. Hurricane recommends staying with the UL certified listed inverters that are heavier and have much greater capabilities for those looking for a serious systems to meet long term power usage on their homes. We do however recognize those who are hobbyists that wish to experiment with wind power. Input voltage range: 22-60vdc (test point is at the output of the internal rectifier). Max input DC voltage: 60V. Peak power tracking voltage: 25-60V. Max output power: 1000W. Nominal voltage range: 95-140V. Frequency range: 47.5-51-5 for 50hz. Power factor: >0.95. Output waveform: Pure Sine Wave. Over temperature protection: Yes. Reverse polarity protection: Yes. Stackable:Just for AC output. Operating temperature range: -20 0C – +50 0C. Inverter inside temperature: -20 0C – +85 0C. Standard: UL 1741, IEEE1547, VDE4105 (No Certificate). Peak inverter efficiency: >92%. 1 x Grid Tie Inverter. 1 x Power Cable. 1 x Dump Load Resistor w/Cables and Bracket. The item “Grid Tie Inverter 1KW MPPT Pure Sine Wave Dump Load for 3 Phase AC Wind Turbine” is in sale since Tuesday, June 18, 2019. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “hurricanewindpowercom” and is located in Roanoke, Virginia. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Turks and caicos islands, Barbados, Bermuda, Bolivia, Ecuador, Guadeloupe, Jordan, Cayman islands, Sri lanka, Martinique, Nicaragua, Oman, Peru, Pakistan, Viet nam, Uruguay.

Model: GT1000
Country/Region of Manufacture: China
MPN: GT1000
Brand: Hurricane Wind Power

Category: grid | Comments Off

June 8

1000w Wind Turbine Grid-tie Inverter with Dump Load & Anti-Islanding

Insulation & Draught Proofing. CFL Energy Saving Lights. Solar Panels & Charging Kits. 1000w Wind Turbine Grid-tie Inverter. 3-phase input directly from the wind turbine, boosted to 240V. Avoids the need for a separate controller. Boosting the output close to the base of the turbine enables the 240V AC power to travel further distances without more significant voltage drop which can occur at low voltage/ high current. Build in dump load controller. 32 x 20 x 8.8cm. 40 to 60 deg C operating range. Requires a weatherproof enclosure. See Images for full technical specifications. Please note: We try to dispatch the same day however sometimes this is not possible due to our collection times. To comply with all UK building regulations any electrical work should be carried out by a UK certified electrician. All electricity should be switched off prior to ANY electrical work being carried out. Low Energy Supermarket was founded in 2010, we offer various energy saving products which help to reduce the ever rising energy bills. We only offer quality products at a competitive price. Sign up for newsletter. Get all the Latest News, Updates and Special Offers about Our Store. We are pleased to accept the following credit cards. The item “1000w Wind Turbine Grid-tie Inverter with Dump Load & Anti-Islanding” is in sale since Monday, May 13, 2019. This item is in the category “Business, Office & Industrial\Industrial Tools\Generators”. The seller is “lowenergysupermarket” and is located in Warrington **No Collections Sorry **. This item can be shipped to United Kingdom, Antigua and barbuda, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, United States, Canada, Brazil, Japan, New Zealand, China, Israel, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Bangladesh, Belize, Bermuda, Bolivia, Barbados, Brunei darussalam, Cayman islands, Dominica, Ecuador, Egypt, Guernsey, Gibraltar, Guadeloupe, Grenada, French guiana, Iceland, Jersey, Jordan, Cambodia, Saint kitts and nevis, Saint lucia, Liechtenstein, Sri lanka, Macao, Monaco, Maldives, Montserrat, Martinique, Nicaragua, Oman, Pakistan, Peru, Paraguay, Reunion, Turks and caicos islands, Aruba, Saudi arabia, South africa, United arab emirates, Ukraine, Chile.

Bundle Listing: No
MPN: 950
Unit Type: Unit
Unit Quantity: 1
Brand: Lowenergie
Power Source: Wind
Type: Boat/ Caravan

Category: 1000w | Comments Off

April 18

2000W Grid Tie Inverter with Dump Load Resistor for 3phase AC wind turbine 45-90

MPPT 2000W Wind Power Grid Tie Inverter with Dump Load Resistor 45-90VDC 230VAC for 3 phase AC wind turbine. Note: The device share the same program even if no clamp sensor or wifi plug requiredyou could get the hardware later. Whenever you want to use limiter /wifi function. Built-in rectifier for 3 phase AC wind turbine generator. Low cost and easy installation. Directly connect to three phase wind turbine. Much better output waveform compare with similar GTI. Improving the efficiency of the entire solar power system. Overload protection , Anti-island protection. Short-circuit protection/Reverse polarity protection. AC output voltage and current THD<5%, PF>99%. Build in dump load function. Build in Limiter (internal type). Introduction of Wind Grid Tie Inverter. The Wind Grid Tie Power Inverter is the worlds most technologically advanced inverter for use in utility-interactive applications. This manual details the safe installation and operation of the The Wind Grid Tie Inverter. The small type wind grid tie power inverter can obtain the wind energy from wind turbine, and can tie to the grid through its output cables with no extra equipment. The installation is very convenient and reliable. The inverter can be connected to any outlets of utility grid at house. The small grid tie inverter monitors the volume, frequency and phase of the home utility grid, then produce pure sine wave AC power that the frequency and phase are as same as the grid’s, and the volume is a bit higher than the grid’s, then according to the current controlled PWM, to control the output power to the grid. The small grid tie inverter just puts out power when the home grid is on. When the wind turbine is rotating, and the output of the voltage is in the range of the rated input voltage of the inverter, the wind turbine will produces power, and the grid tie inverter will change the power from wind turbine to the home grid. When the total power of electric apparatus that are using in the house is larger than the output power of the inverters, these. Power from the inverters will be consumed in the house, this will slow down the power meter. Max input DC voltage. Peak power tracking voltage. 47.5-51.5 for 50hz, 59.3-60.5 for 60hz. Just for AC output. 1x2000W Blue grid tie inverter. How to select a wind grid tie inverter? Max output power of the wind turbine. 500w-1000w wind turbines , suggest 1000w inverter. 1000w-2000w wind turbines , suggest 2000w turbine. 24v 36v 48v wind turbines , suggest 22-65v inverter. 48v 60v 72v 90V wind turbines , suggest 45-90v inverter. Some wind turbines has been built-in a regulator , the output is DC , please choose DC input type wind inverter. How to use a grid tie inverter with battery and wind turbine? If the user want to use a wind turbine to charge battery first , and output excess power to the grid , we suggest the battery function grid tie inverter(solar power GTI , battery function). The wind inverter can not work with battery well. What is the dump load controller/resistor? The dump load controller/resistor is used to protect the wind turbine and inverter. If the wind speed is too fast , the voltage will be high , it will work to reduce the wind turbines runing speed and voltage. WAL model of grid tie invereter connected with AC output type of wind turbine. Connecting two 1000G2-WAL with a max. Power is 2KW wind turbine. User manual of the wind power inverter. Wifi Port for MPPT 1000W/2000W NEW SUN Solar/Wind Grid Tie Inverter. NOTE : this WIFI port must be ordered with 2nd Generation Grid Tie Inverters together. NOTE : It will be built-in side the inverter. Include extra charges for remote area listed by Express companies. Russian buyers were required to fill in the full name; Brazilian buyers are required to leave CPF/CPNJ Number; Chilean buyers are required to leave RUT number. All return products should be in original package with all accessories included. We stand behind our products so you are always covered! The item “2000W Grid Tie Inverter with Dump Load Resistor for 3phase AC wind turbine 45-90″ is in sale since Thursday, February 21, 2019. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “zcsolar2016″ and is located in Shanghai. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.

Country/Region of Manufacture: China
MPN: Does Not Apply
Brand: Tricorpower
Type: Grid Tie Inverter

Category: 2000w | Comments Off

September 16

1000W LCD Wind Power Grid Tie Inverter Pure Sine Wave with Dump Load Resistor

1000W wind power grid tie inverter with LCD& dump load Resistor , New Design , 22-60V/. 45-90V DC to 110V or 220V AC MPPT Pure Sine Wave Grid Tie Power Inverters for wind. Turbine generator grid tie system. WDL—for DC output wind turbine generator grid tie system. This unit is the second generation wind power grid tie inverter, completely new design, new structure. The new design enables the. Inverter working more stable, much better output waveform, much better PF value, higher efficiency etc. Max input DC voltage. Peak power tracking voltage. 47.5-51.5 for 50hz, 59.3-60.5 for 60hz. Just for AC output. WAL—For AC output wind turbine generator grid tie system. This WAL type is integrate rectifier inside the inverter, it can directly connect to the three phase wind turbine, no need to connect. AC to DC controller. Between the wind turbine and the inverter. Currently, we provide two type DC voltage range, 22-60vdc, for 24V. Three phase wind turbine, and 45-90vdc. For 48v three phase wind turbine. (test point is at the output of the inside rectifier). 1x1000W grid tie inverter. When item arrives at. Local custom and buyers are supposed to pay for that. If you have trouble with custom. Include extra charges for remote area listed by Express companies. Russian buyers were required to fill in the full name; Brazilian buyers are required to leave CPF/CPNJ Number; Chilean buyers are required to leave RUT number. All return products should be in original package with all accessories included. We stand behind our products so you are always covered! The item “1000W LCD Wind Power Grid Tie Inverter Pure Sine Wave with Dump Load Resistor” is in sale since Monday, November 21, 2016. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “zcsolar2016″ and is located in , . This item can be shipped to United States, all countries in Europe, all countries in continental Asia, Canada, Mexico, Brazil, Australia.

Country/Region of Manufacture: China
MPN: Does Not Apply
Brand: Tricorpower

Category: 1000w | Comments Off

November 2024
M	T	W	T	F	S	S
« Oct
				1	2	3
4	5	6	7	8	9	10
11	12	13	14	15	16	17
18	19	20	21	22	23	24
25	26	27	28	29	30