June
8
April
20
1000W LCD Wind Grid Tie Inverter MPPT Pure Sine Wave with Dump load resistor
1000W wind power grid tie inverter with LCD& dump load Resistor , New Design, 22-60V/. 45-90V DC to 110V or 220V AC MPPT Pure Sine Wave Grid Tie Power Inverters for wind. Turbine generator grid tie system. WAL—For AC output wind turbine generator grid tie system. This WAL type is integrate rectifier inside the inverter, it can directly connect to the three phase wind turbine, no need to connect. AC to DC controller. Between the wind turbine and the inverter. Currently, we provide two type DC voltage range, 22-60vdc, for 24V. Three phase wind turbine, and 45-90vdc. For 48v three phase wind turbine. This unit is the second generation wind power grid tie inverter, completely new design, new structure, the new design enables the inverter working more stable, much better output waveform, much better PF value, higher efficiency etc. This WAL type is integrate rectifier inside the inverter, it can directly connect to the three phase wind turbine, no need to connect AC to DC controller between the wind turbine and the inverter. Currently, we provide two type DC voltage range, 22-60vdc, for 24V three phase wind turbine, and 45-90vdc for 48v three phase wind turbine. (test point is at the output of the inside rectifier). Max input DC voltage. Peak power tracking voltage. 47.5-51.5 for 50hz, 59.3-60.5 for 60hz. Just for AC output. 1x1000W grid tie inverter. Have given more than 3 negative or netural feedbacks during past 60days. Have received 3 or more negativeor netural feedback during past 60days. Have opened dispute twice in past 60days. We believe that all problems could be fixed by communication between buyers and sellers as long as both of us are honest and understanding. The item “1000W LCD Wind Grid Tie Inverter MPPT Pure Sine Wave with Dump load resistor” is in sale since Wednesday, June 21, 2017. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “sunhome910″ and is located in , . This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.
- Brand: Ecopower
- MPN: Does Not Apply
- Country/Region of Manufacture: China
January
30
2000W Grid Tie Inverter LCD MPPT 45-90v 3 phase Wind Turbines dump load resistor
2000W wind power grid tie inverter with LCD& du. 45-90V DC to 220V AC MPPT Pure Sine Wave Grid Tie Power Inverters with. Built-in rectifier for 3 phase AC wind turbine generator. This unit is the second generation wind power grid tie inverter, completely new design, new structure, the new design enables the inverter working more stable, much better output waveform, much better PF value, higher efficiency etc. This WAL type is integrate rectifier inside the inverter, it can directly connect to the three phase wind turbine, no need to connect AC to DC controller between the wind turbine and the inverter. Currently, we provide two type DC voltage range, 22-60vdc, for 24V three phase wind turbine, and 45-90vdc for 48v three phase wind turbine. 1x2000W wind grid tie inverter. 1xWifi Plug(only available for model with wifi). Clamp Sensor is optional which enable you use limit function. (test point is at the output of the inside rectifier). Max input DC voltage. Peak power tracking voltage. 47.5-51.5 for 50hz, 59.3-60.5 for 60hz. Just for AC output. How to select a wind grid tie inverter? Max output power of the wind turbine. 500w-1000w wind turbines , suggest 1000w inverter. 1000w-2000w wind turbines , suggest 2000w turbine. 24v 36v 48v wind turbines , suggest 22-65v inverter. 48v 60v 72v 90V wind turbines , suggest 45-90v inverter. Some wind turbines has been built-in a regulator , the output is DC , please choose DC input type wind inverter. How to use a grid tie inverter with battery and wind turbine? If the user want to use a wind turbine to charge battery first , and output excess power to the grid , we suggest the battery function grid tie inverter(solar power GTI , battery function). The wind inverter can not work with battery well. What is the dump load controller/resistor? The dump load controller/resistor is used to protect the wind turbine and inverter. If the wind speed is too fast , the voltage will be high , it will work to reduce the wind turbines runing speed and voltage. WAL model of grid tie invereter connected with AC output type of wind turbine. Connecting two 1000G2-WAL with a max. Power is 2KW wind turbine. Wifi Port for MPPT 1000W/2000W NEW SUN Solar/Wind Grid Tie Inverter. NOTE : this WIFI port must be ordered with 2nd Generation Grid Tie Inverters together. NOTE : It will be built-in side the inverter. NOTE : this WIFI port must be used with 2nd Generation Grid Tie Inverters that are with latest program. 1x2000W Blue grid tie inverter. Include extra charges for remote area listed by Express companies. Russian buyers were required to fill in the full name; Brazilian buyers are required to leave CPF/CPNJ Number; Chilean buyers are required to leave RUT number. All return products should be in original package with all accessories included. We stand behind our products so you are always covered! The item “2000W Grid Tie Inverter LCD MPPT 45-90v 3 phase Wind Turbines dump load resistor” is in sale since Friday, October 20, 2017. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “sunhome910″ and is located in Shanghai. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.
- Brand: Tricorpower
- MPN: Does Not Apply
- Country/Region of Manufacture: China
- Total Harmonic Distortion: <5%
- Peak Inverter Efficiency:: 92%
- Power Factor:: 0.99
- Output Wave Form:: Pure Sine Wave
- MPPT Efficiency:: 99%
- Over Current Protection:: YES
- Over Temperature Protection:: YES
- Reverse Polarity Protection:: YES
- Anti-Island Protection:: YES
- Stackable:: YES
- Weight ( Kg):: 6.5Kg
- Dimensions (W x H x D):: 434x196x88mm
- Power Type:: 3 Phase Wind Turbine/Generator
- Dump Load Controller:: Built-In
- Dump load resistor:: Included
- Display:: LCD
- Max. Power Output:: 2000W
- Input Voltage Range:: 45-90V
- AC Output Voltage Range:: 185-265VAC aut
- Output Frequency:: 46Hz~65Hz
- Standby Power Consumption:: <0.5W
January
15
300W Wind Grid Tie Inverter AC 10.8-30V TO AC 110V Turbine Power Dump Load
300 Watt 10.8-30VAC to 110VAC Grid Tie Power Inverter for Wind Turbine stackable. The grid-tie inverter can transfer wind energy from wind generators directly into the home grid using no extra equipment. It can be connected to any outlet (conventional network) in the home. The grid-tie inverter controls the phase and the frequency and voltage of the power generated by the wind generator. It produces a pure sine-wave and matches that of the grid. This model grid-tie has build in bridge rectifier and dump load controller, it can maintain the rotating speed of the wind turbine and keep the voltage from the wind turbine always at the range of the rated range of the grid tie inverter. It also has a high voltage protection function, when the wind is too big, and the dump load controlling system cant keep the output voltage from the wind turbine, the controller will disconnect itself from the wind turbine, so it is very safe to be used. There are 5 terminals on the left side of the inverter, 3 red terminals will be connected to the three phase output from the wind turbine, and 2 black terminals will be connected to dump load resistors. There are 4 LED indicators, 3 green indicators and 1 red indicator, 3 green LED indicators will start to cycle from left to right when the grid and AC input supply is detected. This indicates the inverter is operating under normal condition. The rate of the cycling is according to how much power is being output from the wind turbine. The bigger the output power is, the faster the rate is. If there is no AC grid detected, the red LED will be on, the inverter will not put out power, this is called Island Protection. 10.8V 30V AC NOT DC. We are not responsible for undeliverable address. Pleas message us if recipient address changes needed before we fulfill the order. Sorry, no local pickups available. No need return the original one for low-valued items. All return products should be in original package with all accessories included. We stand behind our products so you are always covered! The item “300W Wind Grid Tie Inverter AC 10.8-30V TO AC 110V Turbine Power Dump Load” is in sale since Tuesday, February 26, 2013. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “chargerangel” and is located in Hayward, California. This item can be shipped to United States, Canada.
- Brand: Mass power
- Model: SUN-300G-WAL
- MPN: Does Not Apply
- Type: Grid Tie Inverters
- Energy Type: Wind Turbine
- Input: 3 Phase AC 10.8V-30V
- Output: AC 110V
October
1
300W Wind Turbine Grid Tie Power Dump Load Inverter DC 10.8V-30V TO AC 110V/220V
Wind Grid Tie Inverter. 300W 10.8-30VAC to 110V. 300W 10.8-30VDC to 110V. 500W 10.8-30VAC to 110V. 500W 10.8-30VDC to 110V. 500W 22-60VDC to 110V. 1000W 22-60VDC to 110V. 1000W AC22-60V to 110V. Solar Grid Tie Inverter. 300W 10.8-30VDC to 110V/240V. 600W 22-60VDC to 110V. 600W 10.8-30VDC to 110V. 2500W Off Grid Inverter. We also have another 300W Wind Grid Tie Inverter Version for sale, please check it. 300W Wind Power Grid Tie Inverter (AC Input Voltage 10.8-30V). We also have the 500W Wind Power Grid Tie Inverter Versions for sale, please check it. 500W Wind Power Grid Tie Inverter (DC Input Voltage Range 10.8-30V). 500W Wind Power Grid Tie Inverter (AC Input Voltage Range 10.8-30V). 500W Wind Power Grid Tie Inverter (DC Input Voltage Range 22-60V). 500W Wind Power Grid Tie Inverter AC Input Voltage Range 22-60V. 300W Small Grid Tie Power Inverter. (with built-in Dump load controller, but not with dump load). Wind Generator Energy System. Works great for wind Turbines with. Output of 300 watts and under…. If you need 500 watts of wind inverter or AC input, please search it at our store. If you need solar power grid tie inverters, please search it at our store or contact me as you do not need the wind starter kit. This 300W micro grid tie inverter is designed specially for small wind energy system. This inverter can directly connect wind charger through inverter to home grid. It can maintain the rotating speed of the wind turbine and keep the voltage from the wind turbine always at the range of the rated range of the grid tie inverter. It also has a high voltage protection function, when the wind is too strong, and the dump load controlling system can not keep the output voltage from the wind turbine, the controller will disconnect itself from the wind turbine, so it is very safe to be used. Easy to installation, just need wind turbine, grid tie inverter, then directly can put into home grid. Features MPPT (Maximum Power Point Tracking) allowing each Wind turbine to run at optimum output. Normal AC Output Power. Maximum AC Output Power. Switch is at 230V Position. Switch is at 115V Position. Total Harmonic Distortion(THD). 10.8V -30V DC (not AC). The small type grid tie power inverter can obtain the wind energy from wind generators and can tie to the grid through its output cable with no extra equipment. The installation is very convenient and reliable. The system which combines the small grid tie power inverter and the wind generator is konw as “SGTS”. The inverter can be connected to any outlet at home, as long as this line is run by the conventional electric network. The small grid tie monitors the volume, frequency and phase of the home grid, then product a pure sune wave that the frequency and phase are as same as the grid’s. 1, Connect Wind Turbines. Supply cables to the DC input terminal of the inverter, be sure that the polarity is correct. Recommended DC input cable size for maximum output is 8AWG or cables that can handle more than. Optimal length would be less than. Longer cables will experience higher voltage drop. The range of output power of wind generator is 20W300W. 2, Put the AC output voltage switch on the inverter to the correct position (115V or 230V) according to your location home grid AC voltage. 3, Connect the supplied AC power cord to the inverter and plug it to a home wall socket. 4, The 3 green LED indicators will start to cycle from left to right when the grid and DC supply is detected. This indicates the inverter is operating under normal condition. The rate of the cycling is according to how much power is being output from the solar panels or the wind turbine. The more big output power is, the more fast the rate is. If there is no AC grid detected, the red LED will be on, the inverter will not put out power, this is called Island Protection. The item “300W Wind Turbine Grid Tie Power Dump Load Inverter DC 10.8V-30V TO AC 110V/220V” is in sale since Wednesday, October 26, 2011. This item is in the category “Consumer Electronics\Multipurpose Batteries & Power\Battery Chargers”. The seller is “chargerdeal” and is located in South San Francisco, California. This item can be shipped to United States.
- Model: SUN-300G-WDL
- Type: Wind Grid Tie Inverters
- MPN: Does not apply
- Brand: masspower
September
18
300W Wind Grid Tie Inverter AC 10.8-30V TO AC 110V Turbine Power Dump Load
Wind Grid Tie Inverter. 300W 10.8-30VAC to 110V. 300W 10.8-30VDC to 110V. 500W 10.8-30VAC to 110V. 500W 10.8-30VDC to 110V. 500W 22-60VDC to 110V. 1000W 22-60VDC to 110V. 1000W AC22-60V to 110V. Solar Grid Tie Inverter. 300W 10.8-30VDC to 110V/240V. 600W 22-60VDC to 110V. 600W 10.8-30VDC to 110V. 2500W Off Grid Inverter. We also have another 300W Wind Grid Tie Inverter Version for sale, but please check it. 300W Wind Power Grid Tie Inverter DC Input Voltage Range 10.8-30V. We also have 500W Wind Inverter Versions for sale, please check it. 500W Wind Grid Tie Inverter (DC Input Voltage Range 10.8-30V). 500W Wind Grid Tie Inverter (AC Input Voltage Range 10.8-30V). 500W Wind Grid Tie Inverter (DC Input Voltage Range 22-60V). 500W Wind Grid Tie Inverter (AC Input Voltage Range 22-60V). 300W Small Grid Tie Power Inverter. (with built-in Dump load controller, but not with the dump load). Wind Generator Energy System. Works great for wind Turbines with. Output of 300 watts and under…. If you need 500 watts of wind inverter or300W grid tie accepting DC input, please search it at our store. If you need solar power grid tie inverters, please search it at our store or contact me as you do not need the wind starter kit. This 300W micro grid tie inverter is designed specially for small wind energy system. This inverter can directly connect wind charger through inverter to home grid. It can maintain the rotating speed of the wind turbine and keep the voltage from the wind turbine always at the range of the rated range of the grid tie inverter. It also has a high voltage protection function, when the wind is too strong, and the dump load controlling system can not keep the output voltage from the wind turbine, the controller will disconnect itself from the wind turbine, so it is very safe to be used. Easy to installation, just need wind turbine, grid tie inverter, then directly can put into home grid. Features MPPT (Maximum Power Point Tracking) allowing each Wind turbine to run at optimum output. Normal AC Output Power. Maximum AC Output Power. Switch is at 230V Position. Switch is at 115V Position. Total Harmonic Distortion(THD). 10.8V -30V AC (not DC). The small type grid tie power inverter can obtain the wind energy from wind generators and can tie to the grid through its output cable with no extra equipment. The installation is very convenient and reliable. The system which combines the small grid tie power inverter and the wind generator is konw as “SGTS”. The inverter can be connected to any outlet at home, as long as this line is run by the conventional electric network. The small grid tie monitors the volume, frequency and phase of the home grid, then product a pure sune wave that the frequency and phase are as same as the grid’s. 1, Connect Wind Turbines. Supply cables to the AC input terminal of the inverter, be sure that the polarity is correct. Recommended DC input cable size for maximum output is 8AWG or cables that can handle more than. Optimal length would be less than. Longer cables will experience higher voltage drop. The range of output power of wind generator is 20W300W. 2, Put the AC output voltage switch on the inverter to the correct position (115V or 230V) according to your location home grid AC voltage. 3, Connect the supplied AC power cord to the inverter and plug it to a home wall socket. 4, The 3 green LED indicators will start to cycle from left to right when the grid and DC supply is detected. This indicates the inverter is operating under normal condition. The rate of the cycling is according to how much power is being output from the solar panels or the wind turbine. The more big output power is, the more fast the rate is. If there is no AC grid detected, the red LED will be on, the inverter will not put out power, this is called Island Protection. The item “300W Wind Grid Tie Inverter AC 10.8-30V TO AC 110V Turbine Power Dump Load” is in sale since Thursday, February 16, 2012. This item is in the category “Consumer Electronics\Multipurpose Batteries & Power\Battery Chargers”. The seller is “chargerdeal” and is located in South San Francisco, California. This item can be shipped to United States.
- Brand: masspower
- Model: SUN-300G-WAL
- MPN: Does not apply
- Type: Wind Grid Tie Inverters
August
25
MPPT 2000W Wind Power Grid Tie Inverter with Dump Load Resistor 45-90VDC 230VAC
MPPT 2000W Wind Power Grid Tie Inverter with Dump Load Resistor 45-90VDC 230VAC. MPPT Pure Sine Wave Grid Tie Power Inverter. Built-in rectifier for 3 phase AC wind turbine generator. 2000G2-WDL-LCD for DC wind turbine generators. This unit is the second generation wind power grid tie inverter, completely new design, new structure. The new design enables the inverter working more stable. Much better output waveform, much better PF value, higher efficiency etc. The WAL type is integrate rectifier inside the inverter, it can directly connect to the three phase wind turbine. No need to connect AC to DC controller between the wind. Turbine and the inverter. Max input DC voltage. Peak power tracking voltage. 47.5-51.5 for 50hz, 59.3-60.5 for 60hz. Just for AC output. 1x2000W Blue grid tie inverter. The item “MPPT 2000W Wind Power Grid Tie Inverter with Dump Load Resistor 45-90VDC 230VAC” is in sale since Monday, November 21, 2016. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “zcsolar2016″ and is located in , . This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.
- Brand: Tricorpower
- MPN: Does Not Apply
- Country/Region of Manufacture: China
June
26
1000W Wind Power Grid Tie Inverter with dump load resistor, 22-60/45-90 DC Input
INTRODUCTION The grid-tie inverter can transfer wind energy from wind generators directly into the home grid using no extra equipment. It can be connected to any outlet (conventional network) in the home. The grid-tie inverter controls the phase and the frequency. And voltage of the power generated by the wind generator. It produces a pure sine-wave and matches that of the grid. This model grid-tie has designed for wind turbines that put out 3 phases AC voltage. It can maintain the rotating speed of the. Wind turbine and keep the voltage from the wind turbine always at the range of the rated range of the grid tie inverter. It also has a. High voltage protection function, when the wind is too big, and the dump load controlling system cant keep the output voltage from. The wind turbine, the controller will disconnect itself from the wind turbine, so it is very safe to be used. Normal AC Output Power. Maximum AC Output Power. AC Output Frequency Range. Total Harmonic Distortion(THD). AC Input Voltage Range. (test point is at the output of the rectifier). The grid-tie inverter can transfer wind energy from wind generators directly into the home grid using no extra equipment. It can be connected to any. Outlet (conventional network) in the home. The grid-tie inverter controls the phase and the frequency and voltage of the power generated by the wind generator. It can maintain the rotating speed of the wind turbine and keep the. Voltage from the wind turbine always at the range of the rated range of the grid tie inverter. It also has a high voltage protection function, when the wind is. Too big, and the dump load controlling system cant keep the output voltage from the wind turbine, the controller will disconnect itself from the wind turbine. So it is very safe to be used. Electric parameters measurement function (voltage, current and active power, electric energy). Running time function (record load cumulative working hours). Power down data save function (save the number of kWh, operation time). Large screen LCD display (display voltage, current, power, active power, cumulative running time). Short press will display power, electricity, current and voltage in anti-sequence. Short press will display power, electricity, current and voltage in sequence. Short press will open or close backlight. 3 phase AC: 22V 60V/45-90. (DC 2260V, test point is at the output of the rectifier). The grid-tie inverter can transfer wind energy from wind generators directly into the home grid. Using no extra equipment. Grid-tie inverter controls the phase and the frequency and voltage of the power generated by the wind. This model grid-tie has build in bridge rectifier and dump load controller, it can maintain the rotating. Speed of the wind turbine and keep the voltage from the wind turbine always at the range of the rated. Range of the grid tie inverter. It also has a high voltage protection function, when the wind is too big, and. The dump load controlling system cant keep the output voltage from the wind turbine, the controller will. Disconnect itself from the wind turbine, so it is very safe to be used. (the test point is at the output of the rectifier). 992%(Consumption of the rectifier is not calculated). This model grid-tie has build in bridge rectifier and dump load controller, it can maintain the rotating speed of the wind turbine. And keep the voltage from the wind turbine always at the range of the rated range of the grid tie inverter. It also has a high voltage. Protection function, when the wind is too big, and the dump load controlling system cant keep the output voltage from the wind. Turbine, the controller will disconnect itself from the wind turbine, so it is very safe to be used. Have given more than 3 negative or netural feedbacks during past 60days. Have received 3 or more negativeor netural feedback during past 60days. Have opened dispute twice in past 60days. We believe that all problems could be fixed. By communication between buyers and sellers as long as both of us are honest and understanding. The item “1000W Wind Power Grid Tie Inverter with dump load resistor, 22-60/45-90 DC Input” is in sale since Wednesday, June 21, 2017. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “sunhome910″ and is located in , . This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia.
- Brand: Ecopower
- MPN: Does Not Apply
- Country/Region of Manufacture: China
May
24
1000W Wind Power Grid Tie Inverter with dump load resistor, 22-60/45-90 DC Input
INTRODUCTION The grid-tie inverter can transfer wind energy from wind generators directly into the home grid using no extra equipment. It can be connected to any outlet (conventional network) in the home. The grid-tie inverter controls the phase and the frequency. And voltage of the power generated by the wind generator. It produces a pure sine-wave and matches that of the grid. This model grid-tie has designed for wind turbines that put out 3 phases AC voltage. It can maintain the rotating speed of the. Wind turbine and keep the voltage from the wind turbine always at the range of the rated range of the grid tie inverter. It also has a. High voltage protection function, when the wind is too big, and the dump load controlling system cant keep the output voltage from. The wind turbine, the controller will disconnect itself from the wind turbine, so it is very safe to be used. Normal AC Output Power. Maximum AC Output Power. AC Output Frequency Range. Total Harmonic Distortion(THD). AC Input Voltage Range. (test point is at the output of the rectifier). The grid-tie inverter can transfer wind energy from wind generators directly into the home grid using no extra equipment. It can be connected to any. Outlet (conventional network) in the home. The grid-tie inverter controls the phase and the frequency and voltage of the power generated by the wind generator. It can maintain the rotating speed of the wind turbine and keep the. Voltage from the wind turbine always at the range of the rated range of the grid tie inverter. It also has a high voltage protection function, when the wind is. Too big, and the dump load controlling system cant keep the output voltage from the wind turbine, the controller will disconnect itself from the wind turbine. So it is very safe to be used. Electric parameters measurement function (voltage, current and active power, electric energy). Running time function (record load cumulative working hours). Power down data save function (save the number of kWh, operation time). Large screen LCD display (display voltage, current, power, active power, cumulative running time). Short press will display power, electricity, current and voltage in anti-sequence. Short press will display power, electricity, current and voltage in sequence. Short press will open or close backlight. 3 phase AC: 22V 60V/45-90. (DC 2260V, test point is at the output of the rectifier). The grid-tie inverter can transfer wind energy from wind generators directly into the home grid. Using no extra equipment. Grid-tie inverter controls the phase and the frequency and voltage of the power generated by the wind. This model grid-tie has build in bridge rectifier and dump load controller, it can maintain the rotating. Speed of the wind turbine and keep the voltage from the wind turbine always at the range of the rated. Range of the grid tie inverter. It also has a high voltage protection function, when the wind is too big, and. The dump load controlling system cant keep the output voltage from the wind turbine, the controller will. Disconnect itself from the wind turbine, so it is very safe to be used. (the test point is at the output of the rectifier). 992%(Consumption of the rectifier is not calculated). This model grid-tie has build in bridge rectifier and dump load controller, it can maintain the rotating speed of the wind turbine. And keep the voltage from the wind turbine always at the range of the rated range of the grid tie inverter. It also has a high voltage. Protection function, when the wind is too big, and the dump load controlling system cant keep the output voltage from the wind. Turbine, the controller will disconnect itself from the wind turbine, so it is very safe to be used. Have given more than 3 negative or netural feedbacks during past 60days. Have received 3 or more negativeor netural feedback during past 60days. Have opened dispute twice in past 60days. We believe that all problems could be fixed. By communication between buyers and sellers as long as both of us are honest and understanding. The item “1000W Wind Power Grid Tie Inverter with dump load resistor, 22-60/45-90 DC Input” is in sale since Thursday, May 18, 2017. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “sunhome910″ and is located in , . This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia.
- Brand: Ecopower
- MPN: Does Not Apply
- Country/Region of Manufacture: China
May
7
2000W LCD Wind Turbine Grid Tie Inverter Dump Load 45-90VDC To 230VAC MPPT New
2000W Wind Turbine Generator Grid Tie Inverter DC 45-90V to AC 230V. This 2000W micro grid tie inverter is designed specially for small wind energy system. This inverter can directly connect wind charger through inverter to home grid. This inverter has been built in dump load controller, it can maintain the rotating speed of the wind turbine and keep the voltage from the wind turbine always at the range of the rated range of the grid tie inverter. It also has a high voltage protection function, when the wind is too strong, and the dump load controlling system can not keep the output voltage from the wind turbine, the controller will disconnect itself from the wind turbine, so it is very safe to be used. Features MPPT (Maximum Power Point Tracking) allowing each Wind turbine to run at optimum output. On the LCD Panel of the inverter, there is one AC output socket, that will connect the AC output cable to home grid. The LCD display will display the grid AC voltage, current , active power and electric energy that combined to the grid. LCD display Function: 1. Electric parameters measurement function (voltage, current and active power, electric energy). Running time function (record load cumulative working hours). Power down data save function (save the number of kWh, operation time). Large screen LCD display (display voltage, current, power, active power, cumulative running time) Key Function. UP: Short press will display power, electricity, current and voltage in anti-sequence. DOWN: Short press will display power, electricity, current and voltage in sequence. BACK LIGHT: Short press will open or close backlight. Connect Wind Turbines DC supply cables to the DC input terminal of the inverter, be sure that the polarity is correct. Recommended DC input cable size for maximum output is 8AWG or cables that can handle more than 30A. Optimal length would be less than 8m , longer cables will experience higher voltage drop. The range of output power of wind generator is 20W2000W. Connect the supplied AC power cord to the inverter and plug it to a home wall socket. The 3 green LED indicators will start to cycle from left to right when the grid and DC supply is detected. This indicates the inverter is operating under normal condition. The rate of the cycling is according to how much power is being output from the solar panels or the wind turbine. The more big output power is, the more fast the rate is. If there is no AC grid detected, the red LED will be on, the inverter will not put out power, this is called Island Protection. 45V 90V DC NOT AC. No need return the original one for low-valued items. All return products should be in original package with all accessories included. We stand behind our products so you are always covered! Pleas message us if recipient address changes needed before we fulfill the order. Sorry, no local pickups available. The free listing tool. List your items fast and easy and manage your active items. The item “2000W LCD Wind Turbine Grid Tie Inverter Dump Load 45-90VDC To 230VAC MPPT New” is in sale since Tuesday, March 07, 2017. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “chargerangel” and is located in San Jose, California. This item can be shipped to United States, Canada.
- MPN: Does Not Apply
- Brand: Mass power