Wind Grid Tie Inverter Dump Load Resistor MPPT Wifi Function Optional AC Turbine. The Inverter display can show many information, The main interface of the display and the icons explainations are show above. The inverter also integrate with internal limiter and external limiter function which can prevent excess power from going to the public grid. Select the internal limiter mode, inverter will work under limiter mode, output power of the inverter will be determined by load power. Select the external limiter modeplease choose the mode. , inverter need a external limiter module working with it. Limit Mode:External limiter and Internal limiter are settable. Limit mode+External limiter both selected means work under external limiter mode. Limit mode+Internal limiter both selected means work under external limiter mode. LCD back light:Select it, Lcd will always on. Unselect it, Lcd will auto turn off after about 10s without any action on lcd button. Press any of the button to light lcd again. Remote Num:while using with wifi plug for monitoring, set by 1. While using with the WIFI-RTU(one rtu can monitoring multiple inverters), set monitored inverter numbers. Bat or solar limited current mode:This function is usable while using with battery. The setted voltage will be the cut off voltage, this means while battery discharged to the setted voltage point or below setted point, inverter will auto disconnect from the battery and stop operating. This can prevent the battery from over discharged. The setted current means inverter will discharge the battery at this current level. Mppt function of the inverter will auto invalid when working under this setting. Set is 0.1V/step. Set is 0.1V/Step. Battery and solar limited power mode:At this working mode, cut off voltage setting is same as 6.4, and the power setting is the maximum output power of the. The 22-65V type inverter will start up at 25V, and 45-90V type inverter will start up at 49.5V, after start, inverter can still work until 22v or 45v. Current sensor Orientation:Please check the current flow direction arrow on the sensor before use, make sure the connection is correct. Otherwise, inverter will not start up at limit mode. Negative power under AC voltage means power overflow to the grid. Positive means power come from the grid. Wifi Port for MPPT 1000W/2000W NEW SUN Grid Tie Inverter. NOTE : this WIFI port must be ordered with 2nd Generation Grid Tie Inverters together. NOTE : It will be built-in side the inverter. There may be some delays due to flight, holiday, weather, local post, local natural disaster impact. It must also be in the original packaging. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “audosta” and is located in this country: CN. This item can be shipped worldwide.

• Color: No WIFI
• Input Voltage: 3phase AC22-65V
• Output Voltage: AC 185-265V
• Socket Type: No Limiter
• Size: 322x196x88mm
• Current Rating: Other
• Inverter Technology: Microinverter
• Model: 5175583956
• Country/Region of Manufacture: China
• Output Type: Single
• Custom Bundle: No
• Output Waveform: Pure Sine Wave
• Phase: Single Phase
• Warranty: 1Year
• Weight: 5KG
• Current Type: AC
• System Configuration: Grid-Tie
• Power Source: Wind
• Type: DC/AC Inverters
• Features: Zero export
• MPN: 5175583981
• Recommended Environment: Indoor/Outdoor
• Item Length: Standard
• Power: 1000W
• Current Output: Other
• Brand: Unbranded
• Application: Agriculture/Farming, Camping/Hiking, Home/Garden
• Charging Mode: MPPT (Maximum Power Point Tracking)
• AC Output Voltage: 90-260VAC
• DC Input Voltage: 22-65V/45-90V
• Efficiency: 92%
• Is_customized: Yes
• Max.Output Power: 1000W
• Output Frequency: 50hz/60hz
• Output Power: 1000W
• Resistance Properties: Other
• Voltage: Other