New Wind Power Grid Tie Inverter With Limiter /dump Load Controller 2000w 1000w

Input AC/DC Voltage Range. AC Output Voltage Range. Out USA: it usually takes about 28-55 days to get it. After receiving the item, if you have any problem, like get damaged or does not like description or don’t like or missing peices or any others. After you received order. If there has damaged or missing part, please. Send me pictures and describe the problem in detaili. So i know what happend. I would offer you a solution within 24-48 hours(most can be replied within 24 hours except we are on holiday or one day off). Same conditions as original pacakge. For the products which have been in use already, misused, or repaired, or destoryed. Because of size and weight rules, some item maybe come with. First if you found missing parts. Thank you, hope you can understand.

Category: wind | Comments Off

May 24

New Wind Power Grid Tie Inverter With Limiter /dump Load Controller 2000w 1000w

2000w 1000w Wind Power Grid Tie Inverter With Limiter /dump Load Controller/resi. 2000W 1000W Wind Power Grid Tie Inverter with Limiter /Dump Load Controller/Resistor for 3 Phase 48v 60v wind turbine generator –Max Efficiency:>92% MPPT Efficiency:99% –3PHASE AC 45V-90V –AC 220V 230V 240V 50hz 60hz NEW 1000W 2000W Wind Power Grid Tie Inverter Max Efficiency:>92% MPPT Efficiency:99% 1. Low cost and easy installation 2. Directly connect to three phase wind turbine 3. Much better output waveform compare with similiar GTI 4. Improving the efficiency of the entire solar power system Overload protection, Anti-island protection Short-circuit protection/Reverse polarity protection 5. AC output voltage and current THD. Input AC/DC Voltage Range. AC Output Voltage Range. Dimensions (W x H x D). (1) (2) Dump load resistor connection Terminal. This terminals will connect to the dump load resistor. (3) AC socket, This socket will connect the inverter to the public grid via the AC cable. This terminals will connect to the wind turbine. Inverter Display Instruction The Inverter display can show many information, The main interface of the display and the icons explainations are show above. The inverter also integrate with internal limiter and external limiter function which can prevent excess power from going to the public grid. Select the internal limiter mode, inverter will work under limiter mode, output power of the inverter will be determined by load power. Select the external limiter mode, inverter need a external limiter module working with it. For more details about the limiter function, pls contact supplier. This function only useful with limiter type inverter. Power View: In this interface, the display shows real time power, PV input voltage, inside temperature, date and time. Clock And Date Setting: Set the clock and date in this page, save the setting before exit. Notes: Save the setting after you reconfigurate the working mode or backlight setting. Notes: Battery Discharge Current Mode And Battery Discharge Power Mode are not developed yet for this wind inverter. Grid Waveform: This interface will show the real time grid waveform. The grid voltage and frequency also will show in this interface. Energy Menu: The energy interface will show the power generation curve everyday. Today KWH and Total KWH are also show in this page. AC Output Current Waveform and PF Test Of 2000W Model Tested 2000W model at nearly full load, Output current waveform shows good pure sine wave in oscilloscope, PF value also shows in good result, 99.8% PF value. Advanced patented technology, MPPT efficiency is higher. High-quality imported components, more stable quality, lower failure rate. Significantly longer life, more than 10 years. Each inverter need to pass twice testing (20 hours) before leaving factory. Low cost and easy installation. Combination of SGPV does not interact. Improving the efficiency of the entire solar power system. The product came very well packaged. I’m very happy. Thank you for everything. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “best-shopping-with-us” and is located in this country: CN. This item can be shipped worldwide.

Color: Only Inverter
Input Voltage: 3phase Ac 22-65v
Output Voltage: 1000W 90-260VAC
Socket Type: US
Origin: Mainland China
Brand: Unbranded
Type: Charger/Inverter
Current Type: AC/DC
System Configuration: Grid-Tie
Power Source: Wind
Output Type: Single
Output Current: 0-20a
Model Number: Teg-1000g-wal, Teg-2000g2-wal
Is_customized: Yes
Output Frequency: 46hz ~ 65hz

Category: wind | Comments Off

October 31

Wind Power Microinverter MPPT 1000W Grid Tie 3 Phrase Inverter Pure Sine Wave AC

Wind Power Microinverter MPPT 1000W Grid Tie 3 Phrase Inverter Pure Sine Wave AC. The Advantage of Inverter. Advanced patented technology, MPPT efficiency is higher. High-quality imported components, more stable quality, lower failure rate. Significantly longer life, more than 10 years. Each inverter need to pass twice testing (20 hours) before leaving factory. Low cost and easy installation. Combination of SGPV does not interact. Improving the efficiency of the entire solar power system. Why we produced the GRID TIE INVERTER WITH LIMITER? It is in response to the overwhelming clamor from our customers for a product that can control the amount of power that the rid tie inverters (GTI) can generate so that the amount of excess power produced by the solar panels are reduced to insignificant levels, if not eliminated — because in some countries, the producer pays for the excess power it gives to the distribution grid. This is because the electric power meters (the one provided by the electricity provider in the area) are not aware of the direction of power flow. In other words it only adds even if power is exported to the grid, thus, the consumers will be charged for power even if it is given to the grid, and this is the problem. 22-65V/45-90VAC (24v Or 48V AC Wind Turbine). Max input DC voltage. Peak power tracking voltage. 47.5-51.5 for 50hz; 59.3-60.5 for 60hz. Just for AC output. 20’C — +85’C. Layout of Sunshine Grid Tie Power Inverter. Dump load resistor connection Terminal. This terminals will connect to the dump load resistor. AC socket, This socket will connect the inverter to the public grid via the AC cable. This terminals will connect to the wind turbine. Choosing a suitable dump load resistor. Because SUN series grid tie inverter for wind turbine has built in dump load controller, so the inverter can connect with dump load resistor directly. There are two terminals for dump load resistor connection on the panel of the inverter. Different model of grid tie inverter need to connect with different type of dump load resistor, We will send you the applicable resistors according to the inverter model you ordered. The connecting drawing of “SGWT”. WDL model of SUN series grid tie inverter connected with AC output type of wind turbine. BWAL model of SUN series grid tie inverter connected with AC output type of wind turbine. Power is 2KW wind turbine. Installing Sunshine Grid Tie Power System to Three Phases Utility Grid. When the Capacity of Gird Tie Power System is larger, install all the power system to one phase of the utility grid is not reasonable, maybe this will cause unbalance of the three phase of the utility grid. In this section, we will explain how to install Sunshine Power System to three phases utility grid separately in order to balance the fed power. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “myincast” and is located in this country: CN. This item can be shipped worldwide.

Color: With Wifi Modem
Input Voltage: 22V-60V
System Configuration: Grid-Tie
Current Type: AC
Power Source: Wind
Inverter Technology: Microinverter
Current Output: Standard
Size: 322x196x88mm
Custom Bundle: No
Wattage: Standard
Maximum Flow Rate: Standard
MPN: 9794893743
Item Length: Standard
Wire Gauge: Standard
Voltage: 45-90V
Connector Type: Other
Features: All Daylight Conditions, Automatic Voltage Detection
Protection Properties: Other
Maximum Input Power: Standard
Maximum Input Voltage: 60V/90V
Current Rating: 11-20 A
Material: Nylon Fiber
Brand: Unbranded
Type: Charger/Inverter
Connector Configuration: Other
Model: 9794893718
Recommended Environment: Indoor/Outdoor
Charging Mode: MPPT (Maximum Power Point Tracking)
Resistance Properties: Dustproof, Dust Resistant
Country/Region of Manufacture: China
Application: Agriculture/Farming
Power: 1000W
Product Line: Wind Power Microinverter

Category: wind | Comments Off

September 17

2KW Wind Grid Tie Inverter with Power Limiter DC45-90V for 3 Phase 48V Wind Turbine

1000W Solar Grid Tie Inverter Limiter Wechselrichter DC45-90V/DC26-60V to AC230V. 3500W 24VDC MPPT 100A Hybrid Inverter 230VAC 50Hz/60Hz Off Grid Solar Charger CE. 5.5KW Hybrid Inverter Solar Off Grid Inverter 5500W 48V 240V Built-in MPPT 100A. 5.5KW Solar Hybrid Inverter 48V 220V 100A MPPT Charge Controller PV Input 500VDC. 3KVA Hybrid Solar Inverter 220VAC 24VDC 50A PWM Pure Sine Wave Off Grid Inverter. 3000W Solar Inverter Hybrid 24VDC 220V Pure Sine Wave Off Grid Inverter PWM 50A. 600W Solar Grid Tie Micro Inverter DC30-55V to AC230V Pure Sine Wave Inverter CE. 600W Solar Grid Tie Microinverter DC11-32V to AC230V Pure Sine Wave Inverter CE. 1000W Solar Grid Tie Inverter DC10.8-30V to AC230V MPPT Pure Sine Wave Inverter. 1000W Grid Tie Micro Inverter MPPT DC20-45V to AC230V Pure Sine Wave Inverter CE. 1300W Solar Grid Tie Micro Inverter DC20-45V to AC230V Pure Sine Wave Inverter. 1400W Grid Tie Inverter DC22-50V for 24V/36V Solar Panel Pure Sine Wave Inverter. 300W Grid Tie Micro Inverter w/WIFI Communication DC30-60V for 30V 36V PV Panel. 600W MPPT Grid Tie Inverter for 36V Solar Panel Microinverter DC18-50V AC230V. 700W Solar Grid Tie Micro Inverter MPPT DC26-46V to AC230V for 36V Solar Panel. SG-DataBox For SG Series Microinverter 2.4G Wireless Communication & Monitoring. 600W Wechselrichter Solar Grid Tie Inverter DC22-50V/AC230V Micro Inverter IP65. 300W Grid Tie Inverter MPPT DC26-46V for 36V PV Panel Pure Sine Wave Inverter CE. 500W/600W/700W Solar Microinverter Grid Tie Inverter MPPT DC26-46V to AC230V CE. 120-180W Solar Microinverter Grid Tie Inverter DC16-26V for 12V PV Panel 220VAC. 3KVA Solar Hybrid Inverter 24VDC 230VAC Built-in 50A PWM Solar Charge Controller. 3KVA Off-Grid Wechselrichter 24VDC 230V Solar Hybrid Inverter Mit 50A Ladegerät. 3.5KW Off-Grid Solar Inverter 24V 220V 100A MPPT 500VDC PV Input Hybrid Inverter. 5.5KW Off-Grid Solar Inverter 48V 220V 100A MPPT 500VDC PV Input Hybrid Inverter. 2M 32.5mm AC Power Cable Used for SG Series Waterproof Grid Tie Inverter. 300/600W Solar Grid Tie Inverter DC26-46V to AC230V Pure Sine Wave Inverter IP65. 300W Solar Grid Tie Micro Inverter with WIFI DC30-60V for 30V 36V PV Panel MPPT. 600W Waterproof Grid Tie Inverter DC26-46V to AC230V Pure Sine Wave Inverter CE. 300W-700W Solar Wechselrichter Grid Tie Inverter DC18-50V to AC230V 50HZ/60HZ CE. 300W 350W Solar Grid Tie Inverter Pure Sine Wave DC26-46V Input AC230V Output CE. 1000W Solar Grid Tie Inverter with Power Limiter Sensor DC45-90V, AC110/220V Auto. 2000W Solar Wechselrichter Grid Tie Inverter with Limiter MPPT DC45-90V/AC230V. 600W Solar Grid Tie Micro Inverter MPPT AC230V for 12V Solar Panel/24V Battery. 600W Solar Wechselrichter Grid Tie Inverter DC30-55V for 30V/36V PV Panel AC230V. 600W Solar Grid Tie Micro Inverter for 12V/36V PV Panel Pure Sine Wave Inverter. 2KW Wind Grid Tie Inverter w/Power Limiter DC45-90V for 3 Phase 48V Wind Turbine. For European Union countries: If our German warehouse has stock, the package will be sent directly from the German warehouse. The test point should be at the DC side of the built-in rectifier of the inverter, but you can calculate from 3 phases of AC output voltage of the wind turbine to get the DC voltage, the formula is Vac = Vdc/1.732. For example, if the DC input voltage range of the inverter is 4590V, then the wind turbine’s output AC range of the should be 45/1.73290/1.732 = AC25.9V 51.96V. This model grid tie has designed for wind turbines that put out 3 phases AC voltage. It can maintain the rotating speed of the wind turbine and keep the voltage from the wind turbine always at the range of the rated range of the grid tie inverter. It also has a high voltage protection function, when the wind is too big, and the dump load controlling system can’t keep the output voltage from the wind turbine, the controller will disconnect itself from the wind turbine, so it is very safe to be used. Wind Grid Tie Inverter with Limiter Sensor, which can prevent excess power from going to the public grid. Select the internal limiter mode, inverter will work under limiter mode, output power of the inverter will be determined by load power. The backlit LCD display gives you a clear picture of the inverter’s operating status. The status of errors will be displayed with red letters on the grid tie inverter LCD display. Easy installation, Can be paralleled on AC side. Overload protection, Anti-island protection, Short-circuit protection/Reverse polarity protection. We call a system combining with a small grid tie inverter and a wind turbine as “SGWT”. The small type of wind grid tie power inverter can obtain the wind energy from wind turbines and tie to the grid through its output cables with no extra equipment. The inverter can be connected to any outlets of the utility grid at the house. The small grid tie inverter monitors the volume, frequency, and phase of the home utility grid, producing pure sine wave AC power that the frequency and phase are the same as the grids. The small grid tie inverter puts out power when the home grid is on. When the AC wind turbine is rotating, and its output of the voltage is in the range of the rated input voltage of the inverter, the wind turbine will produce power, and the grid tie inverter will change the power from the wind turbine to the home grid. When the total power of the electric appliance that is using in the house is larger than the output power of the inverters, this power from the inverters will be consumed in the house. This will slow down the power meter; otherwise, the difference of the output power of the inverter between the total used power of the appliance will go out from the house to the out grid. NOTE: Any DC power input is prohibited. The Advantage of Inverter. Directly connect to three phase wind turbine(48V AC Wind Turbine Generator). Plug and play, easy to install. Can be paralleled on AC side. Built-in dump Load controller. Each inverter need to pass twice testing (20 hours) before leaving factory. Wind Turbine Voltage Range:AC25.9V 51.96V. How to choose the correct wind AC output voltage? You can calculate from 3 phases of AC output voltage of the wind turbine to get the DC voltage, the formula is Vac = Vdc/1.732. Input AC/DC Voltage Range:45-90V. AC Output Voltage Range:90-260VAC. Peak Inverter Efficiency:92%. Power Factor:0.99. Output Wave Form:Pure Sine Wave. Over Current Protection:Yes. Over Temperature Protection:Yes. Reverse Polarity Protection:Yes. VDE-AR-N 4105:2018-11;DIN VDE V 0124-100:2020-06. Weight (Kg):7.48KG. Dimensions (W x H x D):43419688mm. Dump load resistor connection Terminal. This terminals will connect to the dump load resistor. AC socket, This socket will connect the inverter to the public grid via the AC cable. This terminals will connect to the wind turbine. The Inverter display can show many information, The main interface of the display and the icons explainations are show above. The inverter also integrate with internal limiter and external limiter function which can prevent excess power from going to the public grid. Save the setting after you reconfigurate the working mode or backlight setting. Installing Sunshine Grid Tie Power System involves several key steps. Considering the total capacity of the grid tie power system that you need. Choosing applicable wind turbine for Sunshine Grid Tie Inverter. Selecting accessory for installation of the Grid Tie Power System. Selecting correct model of Sunshine Grid Tie Inverter. Installing wind turbine to suitable place. Installing Sunshine Grid Tie Inverter to suitable place. Connecting Sunshine Grid Tie Power System with cables and connectors. Three Phases Grid Tie Power System. For example, installing a 6KW grid tie power system to three phase utility grid. The diagram is shown in Fig. 8, we seperate 6KW power sytem to three power system units, every unit has 2KW power. Connecting every system unit to different phase, this canbalance all grid tie power to three phases of the utility grid. Fllow this way, you can install more large grid tie power system to three phases, justseperate the whole power system to three equal power system units. Sellers are not responsible for service transit time. Transit times are provided by the carrier, exclude weekends and holidays, and may vary with package origin and destination, particularly during peak periods. (Only for Business Express). Feedback is very important to us. Please do not give us any bad feedback. If you can do as we say, we will be very grateful. Please give us the opportunity to resolve any problem. This item is in the category “Heimwerker\Erneuerbare Energie\Wechselrichter & Inverter”. The seller is “yonghui-de” and is located in this country: CN. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.

Output Frequency: 46Hz~65Hz
Marke: Y&H
Stromquelle: Wind
Modell: 2KW Wind Grid Tie Inverter w/Limiter
Herstellungsland und -region: China
Output Wave Form: Pure Sine Wave
AC Output Voltage Range: 90-260VAC
Applied Standards: VDE-AR-N 4105:2018-11;DIN VDE V 0124-100:2020-06
Input AC/DC Voltage Range: 45-90V
Max. Power Output: 2000W
Inverter-Technologie: Mikroinverter
Anwendung: Heim/Garten

Category: wind | Comments Off

August 12

Wind Grid Tie Inverter

Wind Grid Tie Inverter. GCI-2G-W Single Phase Inverter. Made by Ninglong Ginlong Technologies Co. DC reverse polarity protection; AC short circuit protection; islanding protection; temperature protection. Max DC Input 600 Vdc. MPPT operation range 30-540V. Max DC input current 25A. Number of MPPT/Strings per MPPT 1/1. The transient max power 5kW. The grid voltage range 183V-229V/211V-264V (Adjustable). Operation phase Single phase. Output power factor >0.99. Weight 34lbs/15.5 kg. Running temperature -13140 F/-2560 C. Ingress Protection NEMA 3R. Interface RS485 WiFiGPRS (Optional). Design Lifetime >20 years. Utility Monitoring Islanding protection V(ac) F(ac) in accordance with UL 1741, G59/2, AS4777, VDE 0126-1-1. Operating Range Utility Frequency 47-52 or 57-62 Hz (adjustable). Operation Surrounding Humidity 095%. Box opened, but never been used. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “melmermaid810″ and is located in this country: US. This item can be shipped to United States.

Features: Automatic Voltage Detection
Protection Properties: Overcurrent Protection, Low Voltage Protection, Overcharge Protection, Overload Protection, Overvoltage Protection, Reverse Current Protection, Reverse Voltage Protection, Short Circuit Protection, Thermal Protection, Under Voltage Protection
Voltage: 200-299 VAC
Power Source: Wind
Model: GCI-2G-W
Charging Mode: MPPT (Maximum Power Point Tracking)
Wattage: 5000-5999 W
Application: Back-up Power
Current Rating: 21-30 A
Current Type: AC/DC
Current Output: 20-29 A
Power: Greater Than 2000 W
System Configuration: Grid-Tie
Resistance Properties: Heat Resistant, Abrasion Resistant, Shockproof
Brand: Unbranded
Inverter Technology: Central
Type: Charger/Inverter

Category: wind | Comments Off

August 2

Wind Turbine Solar Inverter 1000W Off Grid Tie Pure Sine Wave Battery Inversor

Wind Turbine Solar Inverter 1000W Off Grid Tie Pure Sine Wave Battery Inversor. The is a device that converts direct current (DC from storage battery, solar and wind power) into alternating current (AC). It consists of a bridge, control logic and line circuit. This use high-frequency power conversion technology, and use the ferrite transformer instead the old bulk silicon steel transformer. That is why this inverter is lighter, smaller than other similar. Product and the output waveform are pure sine wave. About Pure sine wave. It outputs pure sine wave alternating current that is the same as or better than the grid we use every day, because it does not have electromagnetic pollution in the grid. The sine wave provides high-quality alternating current and can drive any kind of load, but the technical requirements and cost are high. About inductive load In layman’s terms, that are, high-power electrical products made using the principle of electromagnetic induction, such as motors, compressors, relays, and so on. This type of product requires a starting current that is much larger (approximately 5-7 times) than the current need to maintain normal operation. For example, a refrigerator that consumes about 150 watts during normal operation can make a starting power of more than 1,000 watts. In addition, because the inductive load generates a back electromotive force voltage at the moment of turning on the power or turning off the power, the peak value of this voltage is much larger than the voltage value that the inverter can withstand, and it is easy to cause the transient overload of the inverter, Therefore, this type of electrical appliance has higher requirements on the power supply waveform. Solar and wind power system which supply AC and DC power For lamp, electric cooker, desktop computer, notebook computers, computer monitors, fax, printers, LCD TVS, Fan, DVD, mobile phones, digital products, drill, electric irons, and other original equipment usable electricity. (Inductive appliances must follow the above regulations). Optional: 12/24/48/72/96VDC(1000w designed 12/24v auto match). Color Cables with round fixed ferrule(Positive-Red; Negative-Black). Pure sine wave and soft star. THD 3%(Linear Load). Battery: Voltage, Remaining battery power, battery connected. Protection:Over voltage, low voltage, over load, over temperature, under protection, output load percent, normal working. AC load: voltage, freqency, power on. Remote switch:Remaining battery power, battery connected, power on. 1Standard :US, EU socket; 2Optional: Japan, UK, Australia, France, Universal, Charging socket. Low voltage, over voltage. Shut off output automatically. Intelligent colling fan>45? EN161000-3-2, EN61000-3-3, EN 55024. Installation connection steps: please refer to the above connection diagram. First of all, turn off the switch. Respectively take the red color and black color DC cables to connect with the negative (black terminal) and positive (red terminal) of the batteny. Then turn on the inverter’s switch to check whether it can be started normally. If steps 3 is ok, please connect the plug of the electrical appliance to inverter’s socket. Final to turn on the inverter’s switch again. There may be some delays due to flight, holiday, weather, local post, local natural disaster impact. It must also be in the original packaging. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “audosta” and is located in this country: CN. This item can be shipped worldwide.

Color: Black
Input Voltage: 12 24VDC auto
Output Voltage: 230V(190-260VAC)
Size: Standard
Current Rating: Other
Inverter Technology: Microinverter
Model: Other
Country/Region of Manufacture: China
Maximum Input Power: 1000W
Custom Bundle: No
Current Type: AC/DC
System Configuration: Off-Grid
Maximum Input Voltage: 24V
Power Source: Wind
Type: Charger/Inverter
Features: Durable
MPN: 657437865
Recommended Environment: Indoor/Outdoor
Item Length: Standard
Protection Properties: Other
Power: 1000W
Current Output: Other
Brand: Unbranded
Application: Agriculture/Farming
Charging Mode: MPPT (Maximum Power Point Tracking)
Resistance Properties: Other
Voltage: 12V 24V

Category: wind | Comments Off

June 8

Wind Grid Tie Inverter Dump Load Resistor MPPT Wifi Function Optional AC Turbine

Wind Grid Tie Inverter Dump Load Resistor MPPT Wifi Function Optional AC Turbine. The Inverter display can show many information, The main interface of the display and the icons explainations are show above. The inverter also integrate with internal limiter and external limiter function which can prevent excess power from going to the public grid. Select the internal limiter mode, inverter will work under limiter mode, output power of the inverter will be determined by load power. Select the external limiter modeplease choose the mode. , inverter need a external limiter module working with it. Limit Mode:External limiter and Internal limiter are settable. Limit mode+External limiter both selected means work under external limiter mode. Limit mode+Internal limiter both selected means work under external limiter mode. LCD back light:Select it, Lcd will always on. Unselect it, Lcd will auto turn off after about 10s without any action on lcd button. Press any of the button to light lcd again. Remote Num:while using with wifi plug for monitoring, set by 1. While using with the WIFI-RTU(one rtu can monitoring multiple inverters), set monitored inverter numbers. Bat or solar limited current mode:This function is usable while using with battery. The setted voltage will be the cut off voltage, this means while battery discharged to the setted voltage point or below setted point, inverter will auto disconnect from the battery and stop operating. This can prevent the battery from over discharged. The setted current means inverter will discharge the battery at this current level. Mppt function of the inverter will auto invalid when working under this setting. Set is 0.1V/step. Set is 0.1V/Step. Battery and solar limited power mode:At this working mode, cut off voltage setting is same as 6.4, and the power setting is the maximum output power of the. The 22-65V type inverter will start up at 25V, and 45-90V type inverter will start up at 49.5V, after start, inverter can still work until 22v or 45v. Current sensor Orientation:Please check the current flow direction arrow on the sensor before use, make sure the connection is correct. Otherwise, inverter will not start up at limit mode. Negative power under AC voltage means power overflow to the grid. Positive means power come from the grid. Wifi Port for MPPT 1000W/2000W NEW SUN Grid Tie Inverter. NOTE : this WIFI port must be ordered with 2nd Generation Grid Tie Inverters together. NOTE : It will be built-in side the inverter. There may be some delays due to flight, holiday, weather, local post, local natural disaster impact. It must also be in the original packaging. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “audosta” and is located in this country: CN. This item can be shipped worldwide.

Color: No WIFI
Input Voltage: 3phase AC22-65V
Output Voltage: AC 185-265V
Socket Type: No Limiter
Size: 322x196x88mm
Current Rating: Other
Inverter Technology: Microinverter
Model: 5175583956
Country/Region of Manufacture: China
Output Type: Single
Custom Bundle: No
Output Waveform: Pure Sine Wave
Phase: Single Phase
Warranty: 1Year
Weight: 5KG
Current Type: AC
System Configuration: Grid-Tie
Power Source: Wind
Type: DC/AC Inverters
Features: Zero export
MPN: 5175583981
Recommended Environment: Indoor/Outdoor
Item Length: Standard
Power: 1000W
Current Output: Other
Brand: Unbranded
Application: Agriculture/Farming, Camping/Hiking, Home/Garden
Charging Mode: MPPT (Maximum Power Point Tracking)
AC Output Voltage: 90-260VAC
DC Input Voltage: 22-65V/45-90V
Efficiency: 92%
Is_customized: Yes
Max.Output Power: 1000W
Output Frequency: 50hz/60hz
Output Power: 1000W
Resistance Properties: Other
Voltage: Other

Category: wind | Comments Off

July 4

Wind Power Grid Tie Inverter LCD Screen 230V Wave Limiter Sensor Generator Tool

Wind Power Grid Tie Inverter LCD Screen 230V Wave Limiter Sensor Generator Tool. Output Frequency: 50HZ or 60HZ Auto Match. Is Smart Device: YES. Model Number: MPPT Pure sine Wave Microinverter. Power Factor: >0.95. Output: Pure Sine Wave. DC input voltage: 45V-90VDC. MPPT Voltage: 50 to 90VDC. AC output voltage: 220v 230v 240v. Cooling way: cooling fan. AC Input Voltage: 48v 60v 72v. Recommend Wind Turbine Generator: 1000W 2000W. Ind Turbine Generator Voltage: 48V. The item “Wind Power Grid Tie Inverter LCD Screen 230V Wave Limiter Sensor Generator Tool” is in sale since Sunday, May 16, 2021. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “rideksshop” and is located in Hong Kong. This item can be shipped worldwide.

Size: 434x196x88mm
Current Rating: 1-5 A
Model: MPPT Pure sine Wave Microinverter
Country/Region of Manufacture: China
Protection: Islanding
Recommend Wind Turbine Generator: 1000W 2000W
Recommend Wind Turbine Generator Voltage: 48V
Screen: LCD Screen
Weight: 7.5kg
AC Input Voltage: 48v 60v 72v
AC output: 230V
AC output voltage: 220v 230v 240v
Connect: Single/Three Phase
Cooling way: Cooling fan
Current Type: AC/DC
System Configuration: Grid-Tie
Product Line: Wind Power Grid Tie Inverter
California Prop 65 Warning: None
DC input voltage: 45V-90VDC
Function: Micro Inversor
MPPT Effeciency: 99%
Power Source: Wind
Type: Wind Power Grid Tie Inverter
Features: LCD Screen
MPN: 9029847107
Power: 1000W 2000W
Current Output: 10 A or Less
Brand: Wind Power Grid Tie Inverter
Application: Camping/Hiking
Charging Mode: MPPT (Maximum Power Point Tracking)
MPPT Voltage: 50 to 90VDC
Output: Pure Sine Wave
Output Current: 0-20a
Output Frequency: 50HZ or 60HZ Auto Match
Output Power: 2000W
Output Type: Single
Power Factor: >0.95
Resistance Properties: Dustproof
Voltage: 50 to 90VDC

Category: wind | Comments Off

September 29

New 1KW Wind Power Grid Tie Inverter DC/AC 22V-65V 3 Phase windmill generator

1KW Wind Power Grid Tie Inverter DC/AC 22V-60V 3 Phase windmill generator New. Low cost and easy installation. Directly connect to three phase wind turbine. Much better output waveform compare with similiar GTI. Improving the efficiency of the entire solar power system. Overload protection , Anti-island protection. Short-circuit protection/Reverse polarity protection. AC output voltage and current THD. Build in dump load function. Installing Sunshine Grid Tie Power System involves several key steps. Considering the total capacity of the grid tie power system that you need. Choosing applicable solar panels for Sunshine Grid Tie Inverter. Selecting accessory for installation of the Grid Tie Power System. Selecting correct model of Sunshine Grid Tie Inverter. Installing solar panels to suitable place. Installing Sunshine Grid Tie Inverter to suitable place. Connecting Sunshine Grid Tie Power System with cables and connectors. Completing Sunshine installation map and Connecting the PV modules. 1000W 24V Wind Power Grid Tie Inverter. Input AC/DC Voltage Range. AC Output Voltage Range. 412815.5cm(16.14″11″6.1). This interface will show the real time grid waveform. The grid voltage and frequency also will show in this interface. The energy interface will show the power generation curve everyday. Today KWH and Total KWH are also show in this page. In this interface, the display shows real time power, PV input voltage, inside temperature, date and time. Clock and date setting. 1pc 1000W 24V Wind Grid Tie Power Inverter. The item “New 1KW Wind Power Grid Tie Inverter DC/AC 22V-65V 3 Phase windmill generator” is in sale since Friday, September 11, 2020. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “joysolar” and is located in Los Angeles, California. This item can be shipped worldwide.

Power: 1000W
Model: 12V Wind Grid Tie Inverter
UPC: 607052793906
Input voltage: 12V
Output Wave Form: Pure Sine Wave
Power Type: 3 Phase Wind Turbine/Generator
Brand: Eco-worthy
MPN: L03020201003-1

Category: wind | Comments Off

September 26

ECO 1KW Wind Power Grid Tie Inverter DC/AC 22V-65V 3 Phase windmill generator

It has never been used and everything works as new. Input AC/DC Voltage Range. AC Output Voltage Range. 412815.5cm(16.14″11″6.1). The item “ECO 1KW Wind Power Grid Tie Inverter DC/AC 22V-65V 3 Phase windmill generator” is in sale since Friday, September 6, 2019. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Wind Power Supplies\Wind Turbines & Kits”. The seller is “ottoe8966″ and is located in Kellogg, Iowa. This item can be shipped to United States.

Current Type: DC
System Configuration: Grid-Tie
MPN: L03020201008-1
Brand: Eco-worthy

Category: wind | Comments Off

April 2025
M	T	W	T	F	S	S
« Mar
	1	2	3	4	5	6
7	8	9	10	11	12	13
14	15	16	17	18	19	20
21	22	23	24	25	26	27
28	29	30