Solar Grid Tie Inverter 1KW MPPT PV Panels Battery Discharge On Grid Connected

Solar Grid Tie Inverter 1KW MPPT PV Panels Battery Discharge On Grid Connected. A Wifi Plug with Cable(choose). An AC Power Cable. Piece User Manual (English). The V6.1 version cancelled the EXTERNAL port. We will randomly send the V5.1 version and V6.1 version. The other functions and performances of the improved product are the same as those before the improvement. After the product is improved, it will be more convenient for users to use the product. The products modified include the SUN-2000G2, SUN-1000G2 of solar inverter and SUN-2000G2-WAL(WDL) and SUN-1000G2-WAL(WDL) of wind inverter. Feature for the Solar grid tie inverter. Easy installation, can be paralleled on AC side. Nice LCD display various parameters including input voltage, output power, temperature, form etc. Can be integrated with internal limit function. RS485 extended interface serviceable. Power curve, output sine wave collect by wifi plug and monitor. Work with solar panels/work with battery. Maximum Input DC Voltage. Peak Power Tracking Voltage. Operating DC Voltage Range. 47.5-51.5 for 50gz, 59.3-60.5 for 60hz. Just for AC Output. Wifi Port for MPPT 1000W/2000W NEW SUN Solar Grid Tie Inverter. NOTE : It will be built-in side the inverter. How to use the grid tie inverter? 1 unit inverter installation / more units inverters in parallel. The inverter AC output can be connected in the AC plug of grid in the house. Using Grid Tie Inverter With Limiter Model. 2.1 The Grid Tie Inverter with Limiter delivers only the power needed by the load and prevents delivering excess power hence avoids excess power in going back to the Grid. 2.2 The heart of the Grid Tie Inverter with Limiter is the Limiter Module (LM). The LM continuously sampled the power needed by the load through the current sensor connected after the Main Circuit Breaker. The LM then will process the signal. It then sends signal to Grid Tie Inverter how much power to deliver to the load in real time. 2.3 The user, after installing and connecting the GTIL correctly, need not do anything and the unit will do its work automatically. Installation of GTIL With Internal Limiter. 3.1 This installation is not require an additional limiter module, Installation is much easier. Clamp the current sensor cable to the hot wire to measure the current, the internal limiter will auto detect the load power and control the inverter output power, excess power will be well controlled. 3.2 External protective device including dc and ac SPD(Surge protection device), dc and ac breaker, etc is recommended to installed in the system. Limiter Setting on the LCD of the inverter. The GTIL include three working mode. Work as normal GTI without power limitation. Work under Internal limiter mode. Work under External limiter mode. Pls make your setting on the LCD and save it, details setting operation, pls read the GTI manual. 5 Battery Discharge Power Mode. New upgraded firmware enable battery or solar limiter current and power model. User can set the maximum output power of inverter, this can make the inverter work at cooler contition as user want and extend the lifespan of the inverter. User can set kick in/off voltage of the inverter which can flexible using with battery bank depend on users mind and can prevent battery bank from over discharged. 6 Limiter Module Specification. Clamp sensor- Max 100A. Clamp sensor signal- 5v AC max mA. DC signal Cable- 5v DC, max mA. There may be some delays due to flight, holiday, weather, local post, local natural disaster impact. It must also be in the original packaging. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “sauliai” and is located in this country: CN. This item can be shipped worldwide.

Color: No Wi-Fi
Input Voltage: DC22V-65V
Output Voltage: 110-230V Auto Sense
Socket Type: With 3meters limiter
Size: 430*310*160mm
Current Rating: Other
Inverter Technology: Hybrid
Model: 4600487392
Country/Region of Manufacture: China
Maximum Input Power: Other
Weight: 5KG
Custom Bundle: No
Accessories: AC Power Plugs (optional)
Max.Output Power: 1000W
Current Type: DC
System Configuration: Hybrid
Material: Other
Power Source: Solar
Type: DC/DC Converters, Solar Grid Tie Inverter
Features: Durable
MPN: 4600487420
Recommended Environment: Indoor/Outdoor
Item Length: Standard
Power: Other
Current Output: Other
Brand: Unbranded
Application: Agriculture/Farming, Home/Garden
Charging Mode: MPPT (Maximum Power Point Tracking)
MPPT Efficiency: 99%
Output Frequency: 50HZ60HZ
Output Power: 1000W
Output Type: Single
Output Waveform: Pure Sine Wave
Phase: Single Phase
Warranty: 1 Year
Resistance Properties: Other
Voltage: DC22V-65V or 45V-90V

Category: solar | Comments Off

August 2

Wind Turbine Solar Inverter 1000W Off Grid Tie Pure Sine Wave Battery Inversor

Wind Turbine Solar Inverter 1000W Off Grid Tie Pure Sine Wave Battery Inversor. The is a device that converts direct current (DC from storage battery, solar and wind power) into alternating current (AC). It consists of a bridge, control logic and line circuit. This use high-frequency power conversion technology, and use the ferrite transformer instead the old bulk silicon steel transformer. That is why this inverter is lighter, smaller than other similar. Product and the output waveform are pure sine wave. About Pure sine wave. It outputs pure sine wave alternating current that is the same as or better than the grid we use every day, because it does not have electromagnetic pollution in the grid. The sine wave provides high-quality alternating current and can drive any kind of load, but the technical requirements and cost are high. About inductive load In layman’s terms, that are, high-power electrical products made using the principle of electromagnetic induction, such as motors, compressors, relays, and so on. This type of product requires a starting current that is much larger (approximately 5-7 times) than the current need to maintain normal operation. For example, a refrigerator that consumes about 150 watts during normal operation can make a starting power of more than 1,000 watts. In addition, because the inductive load generates a back electromotive force voltage at the moment of turning on the power or turning off the power, the peak value of this voltage is much larger than the voltage value that the inverter can withstand, and it is easy to cause the transient overload of the inverter, Therefore, this type of electrical appliance has higher requirements on the power supply waveform. Solar and wind power system which supply AC and DC power For lamp, electric cooker, desktop computer, notebook computers, computer monitors, fax, printers, LCD TVS, Fan, DVD, mobile phones, digital products, drill, electric irons, and other original equipment usable electricity. (Inductive appliances must follow the above regulations). Optional: 12/24/48/72/96VDC(1000w designed 12/24v auto match). Color Cables with round fixed ferrule(Positive-Red; Negative-Black). Pure sine wave and soft star. THD 3%(Linear Load). Battery: Voltage, Remaining battery power, battery connected. Protection:Over voltage, low voltage, over load, over temperature, under protection, output load percent, normal working. AC load: voltage, freqency, power on. Remote switch:Remaining battery power, battery connected, power on. 1Standard :US, EU socket; 2Optional: Japan, UK, Australia, France, Universal, Charging socket. Low voltage, over voltage. Shut off output automatically. Intelligent colling fan>45? EN161000-3-2, EN61000-3-3, EN 55024. Installation connection steps: please refer to the above connection diagram. First of all, turn off the switch. Respectively take the red color and black color DC cables to connect with the negative (black terminal) and positive (red terminal) of the batteny. Then turn on the inverter’s switch to check whether it can be started normally. If steps 3 is ok, please connect the plug of the electrical appliance to inverter’s socket. Final to turn on the inverter’s switch again. There may be some delays due to flight, holiday, weather, local post, local natural disaster impact. It must also be in the original packaging. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “audosta” and is located in this country: CN. This item can be shipped worldwide.

Color: Black
Input Voltage: 12 24VDC auto
Output Voltage: 230V(190-260VAC)
Size: Standard
Current Rating: Other
Inverter Technology: Microinverter
Model: Other
Country/Region of Manufacture: China
Maximum Input Power: 1000W
Custom Bundle: No
Current Type: AC/DC
System Configuration: Off-Grid
Maximum Input Voltage: 24V
Power Source: Wind
Type: Charger/Inverter
Features: Durable
MPN: 657437865
Recommended Environment: Indoor/Outdoor
Item Length: Standard
Protection Properties: Other
Power: 1000W
Current Output: Other
Brand: Unbranded
Application: Agriculture/Farming
Charging Mode: MPPT (Maximum Power Point Tracking)
Resistance Properties: Other
Voltage: 12V 24V

Category: wind | Comments Off

August 2022
M	T	W	T	F	S	S
« Jul				Sep »
1	2	3	4	5	6	7
8	9	10	11	12	13	14
15	16	17	18	19	20	21
22	23	24	25	26	27	28
29	30	31