August 18

Xantrex GT5.0 Inverter for Grid Tie solar system

Xantrex-GT5-0-Inverter-for-Grid-Tie-solar-system-01-ha Xantrex GT5.0 Inverter for Grid Tie solar system
Xantrex GT5.0 Inverter for Grid Tie solar system

Xantrex GT5.0 Inverter for Grid Tie solar system
Xantrex GT5.0 Inverter for Grid Tie solar system. I have 3 Xantrex Inverters for solar. These were only used for about 3 years and then removed when whole system was upgraded. They were working as they should. The Xantrex GT 5.0 Grid Tie Solar Inverter. The GT 5.0 offers best-in-class efficiency and the best price to-performance ratio in the industry. The result is a high performance inverter that makes utility interactive installations easier and more cost effective. This high performance photovoltaic string inverter offers high efficiency, clean aesthetics, high reliability as well as lower installed cost. Proven high frequency design in a compact enclosure. 95.5% (CEC listed) 94% peak efficiency maximizes energy harvest. Fast MPPT tracking algorithm ensures maximum energy harvest from the array under any conditions. FCC Part B compliance means less potential interference with communication, radio, and consumer electronics. Sealed inverter enclosure can be separated from the wiring box. Allowing DC/AC connections to remain intact in the unlikely event. That the inverter needs to be serviced. A lightweight and versatile mounting bracket simplifies installation. An inverter is required when you want to power AC devices. The inverter converts the DC power from the solar array/batteries. Product Features: Free PC software for remote monitoring and system troubleshooting available online Bright LED indicators provide system status at a glance. Integrated DC/AC disconnect that is NEC compliant to eliminate the need for external DC (PV) The modular design allows inverters to be mounted side-by-side, using each wiring box as a wiring raceway Rugged NEMA 3R inverter enclosure allows reliable outdoor and indoor installations. Large heat sink offers extraordinary heat dispersion without. The need for a cooling fan. Backlit, two-line, 16-character liquid crystal display (LCD). Indicates instantaneous power, daily and lifetime energy. Production, photovoltaic array voltage and current. LCD vibration sensor allows the tap of a finger to turn backlight on and display screen cycling. Integrated RS232 and Xanbus RJ45 communication ports. Maximum AC power output. AC output voltage (nominal). AC output voltage range. 211 – 264 Vac. 59.3 – 60.5 Hz. Maximum continuous output current. DC input voltage range. 235 – 600 Vdc. Peak power tracking voltage range. 13F to +149F (-25°C to +65°C). 57.0 lbs (25.8 kg). 60.0 lbs (27.2 kg). 34.1 x 20.4 x 10.3 (86.6 x 51.8 x 26.2 cm). Inverter dimensions (H x W x D). 28.5 x 15.9 x 5.7 75.5 x 40.3 x 14.6 cm. Wall mount (mounting bracket included). Eliminates need for external PV (DC) disconnect. Complies with NEC requirements. Convection cooled, no fan required. RS 232 and two Xanbus RJ45 ports. PV, utility, ground, and communications connections. Wiring box can be separated from the inverter. Positive grounding configurations available for the GT2.5-NA-DS-240, GT3.3-NA-DS-240, and GT3.3-NA-DS-208 inverters. The item “Xantrex GT5.0 Inverter for Grid Tie solar system” is in sale since Wednesday, July 17, 2019. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “mountainmetalartpa” and is located in Du Bois, Pennsylvania. This item can be shipped to United States.
  • Brand: Xantrex
  • Non-Domestic Product: No
  • Custom Bundle: No
  • Model: GT 5.0
  • Modified Item: No
  • System Configuration: Grid-Tie
  • Power Source: Solar
  • MPN: Does Not Apply

Xantrex GT5.0 Inverter for Grid Tie solar system
Category: xantrex | Comments Off
August 18

2000W Wind Power Grid Tie Inverter with Limiter / Dump Load Controller/Resistor

2000W-Wind-Power-Grid-Tie-Inverter-with-Limiter-Dump-Load-Controller-Resistor-01-xh 2000W Wind Power Grid Tie Inverter with Limiter / Dump Load Controller/Resistor
2000W Wind Power Grid Tie Inverter with Limiter / Dump Load Controller/Resistor
2000W Wind Power Grid Tie Inverter with Limiter / Dump Load Controller/Resistor
2000W Wind Power Grid Tie Inverter with Limiter / Dump Load Controller/Resistor
2000W Wind Power Grid Tie Inverter with Limiter / Dump Load Controller/Resistor
2000W Wind Power Grid Tie Inverter with Limiter / Dump Load Controller/Resistor
2000W Wind Power Grid Tie Inverter with Limiter / Dump Load Controller/Resistor
2000W Wind Power Grid Tie Inverter with Limiter / Dump Load Controller/Resistor
2000W Wind Power Grid Tie Inverter with Limiter / Dump Load Controller/Resistor
2000W Wind Power Grid Tie Inverter with Limiter / Dump Load Controller/Resistor

2000W Wind Power Grid Tie Inverter with Limiter / Dump Load Controller/Resistor
2000W Wind Power Grid Tie Inverter with Limiter / Dump Load Controller/Resistor for 3 Phase 48v wind turbine generator. Features of the 2G Wind Power Grid Tie Inverter. The 2nd Generation grid tie inverter, new technical, Higher efficiency. Higher MPPT efficiency, Max 99%. Multiple intelligent protection to ensure safe use. Directly connect to three phase wind turbine, without regulator. Easy to install and easy to operate. UL1741, IEEE1547, VDE4105 standards. Pure Sine Wave output. Build in dump load function. Wind Power Grid Tie Inverter System. The Wind Grid Tie Power Inverter is the worlds most technologically advanced inverter for use in utility-interactive applications. This integrated system maximizes energy harvest, increases system reliability, and implifies design, installation and management. The small type wind grid tie power inverter can obtain the wind energy from wind turbine, and can tie to the grid through its output cables with no extra equipment. The installation is very convenient and reliable. We call the system combining with small grid tie inverter and wind turbine as SGWT. The system includes wind turbine and small grid tie inverter and installation kit, and some SGWT also will include controller, dump load resistor. The inverter can be connected to any outlets of utility grid at house. The small grid tie inverter monitors the volume, frequency and phase of the home utility grid, then produce pure sine wave AC power that the frequency and phase are as same as the grid’s, and the volume is a bit higher than the grid’s, then according to the current controlled PWM, to control the output. Power to the grid. The small grid tie inverter just puts out power when the home grid is on. When the wind turbine is rotating, and the output of the voltage is in the range of the rated input voltage of the inverter, the wind turbine will produces power, and the grid tie inverter will change the power from wind turbine to the home grid. When the total power of electric apparatus that are using in the house is larger than the output power of the inverters, these. Power from the inverters will be consumed in the house, this will slow down the power meter, otherwise, the difference of the output power of the inverter between the total used power of the apparatus will go out from the house to the out grid. Input AC/DC Voltage Range. AC Output Voltage Range. Dimensions (W x H x D). 469 x 196 x 88 mm. The item “2000W Wind Power Grid Tie Inverter with Limiter / Dump Load Controller/Resistor” is in sale since Thursday, May 16, 2019. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “premiumbusiness” and is located in CH. This item can be shipped worldwide.
  • Output Power: 1 – 200KW
  • Output Type: Single
  • Output Voltage: 185-265VAC
  • Size: 469x196x88mm
  • Stackable: Yes
  • Model: 001
  • Modified Item: No
  • Country/Region of Manufacture: China
  • Custom Bundle: No
  • Weight: 5.9kg
  • Input Voltage: 45-90vdc
  • Is_customized: Yes
  • Output Current: 10A
  • Output Frequency: 50hz 60hz auto
  • Type: DC/AC Inverters
  • MPN: 2000WWind001
  • Brand: 2000W Wind China
  • Voltage: 48

2000W Wind Power Grid Tie Inverter with Limiter / Dump Load Controller/Resistor
Category: 2000w | Comments Off