March 31

PV powered 2000 watt solar inverter 240 volt grid tie

PV powered 2000 watt solar inverter 240 volt grid tie
PV powered 2000 watt solar inverter 240 volt grid tie
PV powered 2000 watt solar inverter 240 volt grid tie
PV powered 2000 watt solar inverter 240 volt grid tie
PV powered 2000 watt solar inverter 240 volt grid tie

PV powered 2000 watt solar inverter 240 volt grid tie
This is a new old stock unit a few years old. Operating voltage 240 volt. The item “PV powered 2000 watt solar inverter 240 volt grid tie” is in sale since Thursday, March 31, 2016. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “jgill100538rx5″ and is located in North Lawrence, Ohio. This item can be shipped to United States.
  • Brand: PV Powered
  • MPN: Does Not Apply

PV powered 2000 watt solar inverter 240 volt grid tie
Category: powered | Comments Off
March 31

2500W Grid tie power inverter DC 28V-48V to AC 220V, MPPT for solar

2500W Grid tie power inverter DC 28V-48V to AC 220V, MPPT for solar
2500W Grid tie power inverter DC 28V-48V to AC 220V, MPPT for solar
2500W Grid tie power inverter DC 28V-48V to AC 220V, MPPT for solar
2500W Grid tie power inverter DC 28V-48V to AC 220V, MPPT for solar
2500W Grid tie power inverter DC 28V-48V to AC 220V, MPPT for solar
2500W Grid tie power inverter DC 28V-48V to AC 220V, MPPT for solar

2500W Grid tie power inverter DC 28V-48V to AC 220V, MPPT for solar
2500W Grid tie power inverter. DC 28V-48V to AC 220V. For solar panel 24V system (best solar panel working voltage 36V). Power jack grid tie inverter is designed for solar panel energy market, it’s suitable for family energy system. This inverter can directly use with solar panel through inverter to home grid. Easy to install, just connect with solar panels, grid tie inverter, then directly can put into home grid. If there are no DC sources ie. In the night, no sun light or raining day, the red led light will turn on, the inverter will stop working, the home grid power will not back to inverter to protect the inverters pcb board. DC 28-48 Volt (solar panel). No Load current Draw. 55 C ± 5. Dimensions (L x W x H /cm). 30 23 16 CM. The inverter are designed for solar panels energy directly , no need battery! For battery, 24V battery for DC 14V-24V inverter; 36V for DC 28V-48V inverter, but please do NOT hook inverter with battery banks for a long time , it will burn the parts of inverter over a period of time. If you want to connect with wind turbine, need connect with a dump load controller, 12v controller for DC 14V-24V inverter; 24V controller for DC 28V-48V inverter; 36V controller for DC 50V-100V inverter. Sometimes, if you are using some heaving appliance like motor, engine, cause the voltage up down very fast, in this moment, big amp will come into the grid inverter, easy to cause the ac mos burned, so surge protector will cut down by itself to protect the grid inverter. You may have experience, when meet the big lightning, the power source of the home appliance may damage, same reason, will also cause the inverter damage, in this moment the lightning protection can release thousand voltages to protect the inverter not damage. High speed AC fuses. Now we put ac fuse outside, each inverter will come our special ac fuse, this will be broken 1 mini/sec, to make sure high voltage spike come in! Is designed for small solar panel & wind energy market, it’s suitable for family energy system. This inverter can directly use solar panel, wind charger through inverter to home grid. Easy to installation, just need solar panel, grid tie inverter, then directly can put into home grid. The inverter can be connected to any outlet in the home providing line power. The inverter IC will monitors the voltage, frequency and phase of the home grid, then produce a pure sine wave phase locked to the grid. The voltage will be just enough higher than the grid’s to feed power into the grid, Then using our current controlled PWM we control the output power to the grid. The inverter will put out power when the home grid is on. The inverter will stop feeding power into the grid when the grid is down, for safety and as required by law. Why should you use a grid tie inverter? When you use power from solar panels to supply the inverter, your home power. Meter will run more slowly(if you are using other electric appliances), or your. Home power meter will run backward(if you are not use any appliances). Why should you use a Power Jack grid tie inverter. In traditional grid tie inverters, the solar panels are connect in series so if one solar panel did not work or had poor efficiency or had a blown bypass diode, then the whole system is affected. With Power Jack inverters, you can use all panels in parallel so if one is not working properly, you only lose the output from that one panel. You can also run several Power Jack inverters parallel instead of having one large expensive unit. If you have just one expensive inverter and it fails you produce no power. If you have several smaller units and one fails you still produce power. Each inverter has it’s own MPPT function so you can extract the maximum power from all of your solar panels. When the dc charge function is normal, the inverter supplies power. If there are no dc sources (like at night or a cloudy or rainy day), the inverter will stop attempting to supply power and shut itself off from the power grid to protect itself and lengthen its lifetime. For DC 14V-24V inverter. For DC 28V-48V inverter. For DC 50V-88V inverter. For DC 102V-158V inverter. 11.5V – 13.5V. Orange light on, fan keep working, but inverter stop working. Green flash faster and more powerful output. Manufacture defects or workmanship, use appropriately, surface of item do not scratch. Manufacture defects or workmanship excludes damage caused by inappropriately used such as improper installation, accident, misuse, abuse, improper storage, or any unauthorized disassembly, repair, or modification. My solar panels are 210W 5 pcs, should I use 5 panels on one inverter or 4 panels. I live in the USA and we use 110V or 220V at 60 cycles. Should I use 1200W grid tie power inverter DC 14V-24V to AC 220V with LCD power meter for solar or 1200W grid tie inverter DC 28V-48V to AC 110V with LCD meter for my solar panels? Should I run them in set of two and double the voltage to 57.7? I like to set it up where I can get the most out of the inverters and the panels, your comments will be highly appreciated. You can use our 1200W grid tie power inverter DC 28V-48V TO AC 220V 60HZ due to below reasons. Your solar panels no load voltage are 35V, and 28V after loading, then the above DC range is just fit it. You can use 5 pcs solar panel and connect them in parallel(DC voltage will be 28V). Then connect them with 1 unit 1200W grid tie power inverter. Regarding use AC 220V system inverter, most home main AC power is 220V. In United States, then separate to 110V(sockets on wall), so you can connect the inverter to home main power (220V) directly. It is ok to use AC 110V inverter, just plug into any home AC 110V socket, but might lose 5-10% power. Q: how to connect Power Jack grid tie inverter? A: inverters DC side connect with solar panels, then the inverter’s plug just plug into home AC socket, and turn on inverter to start work. It is easy to use and no need to add controller. Q: Can solar panels can be hook in series or in parallel? A: solar panels can be hook in series or in parallel, if solar panels are in same voltage, they can be hook in series or in parallel. But if solar panels not in same voltage, they only can be hook in series, can not hook in parallel. Q: Can your grid tie power inverter can be hook together? A: yes, our grid tie power inverter can be connect in parallel, but must be same version. The item “2500W Grid tie power inverter DC 28V-48V to AC 220V, MPPT for solar” is in sale since Monday, March 28, 2016. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “6apex_2012″ and is located in warehouse. This item can be shipped worldwide.
  • Brand: POWER JACK
  • Model: 2500w
  • MPN: does not apply
  • Country/Region of Manufacture: China

2500W Grid tie power inverter DC 28V-48V to AC 220V, MPPT for solar
Category: 2500w | Comments Off
March 30

1000GTIL solar grid tie inverter with power limiter prevent extra power to grid

1000GTIL solar grid tie inverter with power limiter prevent extra power to grid
1000GTIL solar grid tie inverter with power limiter prevent extra power to grid
1000GTIL solar grid tie inverter with power limiter prevent extra power to grid
1000GTIL solar grid tie inverter with power limiter prevent extra power to grid
1000GTIL solar grid tie inverter with power limiter prevent extra power to grid
1000GTIL solar grid tie inverter with power limiter prevent extra power to grid

1000GTIL solar grid tie inverter with power limiter prevent extra power to grid
THIS INVERTER INCLUDES LCD. PLEASE INDICATE YOUR COUNTRY VOLTAGE AND THE DC INPUT 22-60V OR 45-90V WHEN PLACING THE ORDER THANK YOU. The grid tie inverters. (GTI) can generate so that the amount of excess power produced by the solar panels are. Reduced to insignificant levels, if not eliminated — because in some countries. The producer pays for the excess power it gives to the distribution grid. Is because the electric power meters the one provided by the electricity provider in the. Area are not aware of the direction of power flow. In other words it only adds even if. Power is exported to the grid, thus, the consumers will be charged for power even if it is. Given to the grid, and this is the problem. On-Grid System Using Standard Grid Tie Inverter. The Grid Tie inverter converts DC power produced by Solar Panels to AC, connects to the grid and feed all of the power available from the panels. To the AC load. All excess power that is not needed by the load is then exported to the Grid. If the Grid fails, then the Grid Tie Inverter will turn off. When the Grid comes back on line. The Grid Tie Inverter will again supply power to the load and any excess power is exported to the Grid again. If the Solar Panel is producing less power and the GTI cannot deliver all the power needed by the load, then power. Will be supplemented by the Grid. Power Meters (Except smart meter) are not aware of the direction of Power flow. The user then pays for the power exported and delivered by the Grid. On-Grid System Using Grid Tie Inverter With Limiter (GTIL). The Grid Tie Inverter with Limiter delivers only the power needed by the load and prevents delivering excess power hence avoids excess power in going back to the Grid. The heart of the Grid Tie Inverter with Limiter is the Limiter Module (LM). The LM continuously sampled the power needed by the load through the current sensor connected after the Main Circuit Breaker. The LM then will process the signal. It then sends signal to Grid Tie Inverter how much power to deliver to the load in real time. The user, after installing and connecting the GTIL correctly, need not do anything and the unit will do its work automatically. The Limiter Module-Parts Description. Displays the Utility Power (grid power), Inverter Power (GTIL power), Utility KWH and Inverter KWH. AC Receptacle For GTIL AC output. Two (2 pcs) – Connects the AC output of GTIL to LM. Can be plug in either receptacle. Maximum Power per receptacle is 2kw or a total of 4kw GTIL can be plugged in the two receptacles. The output of GTIL can also be directly connected to the grid or through the house convenient outlet. But the LCD will not display the Inverter Power. Connects/clamps to one hot wire after the Main Circuit Breaker. Converts the magnetic field created by the flow of current in the wire into small AC voltage and current which is proportional to the power that passes through the wire. Clamp sensor AC signal socket connects the clamp sensor AC signal to the LM module. Terminal Block- AC power to Grid. The AC output of the GTIL is plugged to the LM receptacle in order for the LCD to display the GTIL output in watts and KWH. The GTIL output is connected to the Grid through the Terminal Block. Connecting the terminal block to AC grid also powers the wattmeter and limiter circuit. Limiter DC Signal Output, 2 pcs Connects the LM output signal to the GTIL signal input. User can connect to any of the signal output receptacle. This is the ideal installation. The GTIL unit and the Limiter Module are placed close to each other. The signal wires will be short, as supplied with the unit. Use a dedicated 20 A breaker for the GTIL in the Load Circuit breaker panel board. Wiring and Connection Procedure. After the GTIL and LM are properly installed. Shut off the main circuit breaker. Connect the clamp sensor to one hot wire after the main breaker. Connect the other end of clamp sensor signal cable to the LM. Neatly lay out the signal cable. You can now safely open the Main breaker. Connect the LM module to grid. Using the terminal block, use atleast wire no. 12 AWG (20A ampacity – wire not included in the package) and connect to 20A circuit breaker dedicated for the GTIL. Make sure the 20A breaker is off while wiring. Do not turn on the breaker! Connect the DC signal cable from LM to GTIL input. The connectors have threaded screw to securely fasten the connectors plug at both ends of the cable. Also the connector plugs have dent/slot in the plugs body so it can only be connected in one direction or position. Connect the Solar panel output to the DC power input of GTIL. Make sure the disconnect switch/breaker of solar panel is off. Review all connections and make sure of the tightness of plugs and connections. Re-check DC polarity connections of solar panel. Turn on the 20A circuit breaker to power the Limiter Module. In the LM, Press SET button below the LCD for a few seconds. The LCD will light up and initialize. After initialization, LCD will display Utility Power, which is the actual power or total load in real time. Press the up and down buttons to display the Inverter Power, Utility power, Utility Total KWH and Inverter Total KWH. Inverter Power should read zero initially. To reset the Utility Total, just press the up button for a few seconds and you will be prompted yes or no to reset. Press up or down button to select either yes or no, and then press SET to reset. To reset Inverter Total, press the down button continuously and you will prompted yes or no also to reset. Press up or down to select yes or no and Press SET to reset. Connect the GTIL power output to the LM AC receptacle using the supplied cable. Turn on the disconnect switch/dc breaker of solar panel. The wattmeter in the GTIL should power up and start producing power after a minute or two. Check the LM display. The utility power should display 0-15w indicating the GTIL is already supplying power to the load. Check the inverter power display in the LCD. To shutdown, turn-off or unplug first the GTIL before disconnecting the power to limiter module. Or shut off the breaker to LM module to cut power to whole set-up. Do not disconnect Solar panel connection to GTIL while the system is operating. In normal operation, when the unit is started or the LM breaker is turned on, while all the cables are connected and DC breaker is on, there will be about 2 minutes and 20seconds time delay before the GTIL unit will run. Always remember that for LM module to power-up, need to press Set buttons first in the LM module for the system to run. Remote Installation of GTIL and LM. Users may require that GTIL will need to be remotely installed or away from the Circuit Breakers Panel Board. In so doing, the Signal cable will need to be made much longer. The maximum cable length that can be used is 30m. The item “1000GTIL solar grid tie inverter with power limiter prevent extra power to grid” is in sale since Thursday, January 28, 2016. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “jadoni1982″ and is located in Ningbo, Zhejiang. This item can be shipped worldwide.
  • Brand: Mass Power
  • Model: 1000GTIL 22-60V
  • MPN: 8504403090
  • Country/Region of Manufacture: China

1000GTIL solar grid tie inverter with power limiter prevent extra power to grid
Category: 1000gtil | Comments Off
March 30

LCD Display 2000W MPPT Solar Grid Tie Inverter Pure Sine Wave DC45-90V TO AC230V

LCD Display 2000W MPPT Solar Grid Tie Inverter Pure Sine Wave DC45-90V TO AC230V
LCD Display 2000W MPPT Solar Grid Tie Inverter Pure Sine Wave DC45-90V TO AC230V
LCD Display 2000W MPPT Solar Grid Tie Inverter Pure Sine Wave DC45-90V TO AC230V
LCD Display 2000W MPPT Solar Grid Tie Inverter Pure Sine Wave DC45-90V TO AC230V
LCD Display 2000W MPPT Solar Grid Tie Inverter Pure Sine Wave DC45-90V TO AC230V
LCD Display 2000W MPPT Solar Grid Tie Inverter Pure Sine Wave DC45-90V TO AC230V
LCD Display 2000W MPPT Solar Grid Tie Inverter Pure Sine Wave DC45-90V TO AC230V
LCD Display 2000W MPPT Solar Grid Tie Inverter Pure Sine Wave DC45-90V TO AC230V

LCD Display 2000W MPPT Solar Grid Tie Inverter Pure Sine Wave DC45-90V TO AC230V
LCD Display 2000W MPPT Solar Grid Tie Inverter Pure Sine Wave. This is the NEW GTI2 Model with enhanced display & menu features! Newly developed grid tie inverter(second generation) with different design structure, enable better and stable operation quality. With much better output pure sine waveform and better PF Value. This IS the brand that is well known for durability and function. These are US Stock and ships as soon as your order is received. INTRODUCTION The small type solar grid tie power inverter can obtain the solar energy from solar panel, and can tie to the grid through its output cable with no extra equipment. The installation is very convenient and reliable. We call the system combining with small solar grid tie power inverter and solar panels as SGPV. The system includes solar panels and small type grid tie power inverter. Solar panels can be mono silicon, polygon silicon, non-crystal film or any other material that can transform solar energy to electric energy. The power of grid tie inverter should be matched to the power of solar panels connected. So the power of SGPV is defined by its solar panels, it can be standardization according to the actual using. The inverter can be connected to any outlet at home, when this line run by the conventional electric network. The small grid tie monitors the volume, frequency and phase of the home grid, then produce a pure sine wave that the frequency and phase are as same as the grid’s, and the volume is a bit higher than the grid’s, then according to the current controlled PWM, to control the output power to the grid. The small grid tie inverter just puts out power when the home grid is on. When the sun shines, the PV panel will produces DC voltage, and the grid tie inverter will change the DC voltage to AC voltage and puts out power to the home grid. When the total power of electric apparatus that are using in the house is larger than the output power of the inverters, these power from the inverters will be consumed in the house, this will slow down the power meter, otherwise, the difference of the output power of the inverter between the total used power of the apparatus will go out from the house to the out grid. Max input DC voltage. Peak power tracking voltage. 47.5-51.5 for 50hz, 59.3-60.5 for 60hz. Just for AC output. The item “LCD Display 2000W MPPT Solar Grid Tie Inverter Pure Sine Wave DC45-90V TO AC230V” is in sale since Sunday, March 27, 2016. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “shore_distribution” and is located in Bayville, New Jersey. This item can be shipped to United States, to Canada, to United Kingdom, DK, RO, SK, BG, CZ, FI, HU, LV, LT, MT, EE, to Australia, GR, PT, CY, SI, to Japan, to China, SE, KR, ID, to Taiwan, ZA, TH, to Belgium, to France, to Hong Kong, to Ireland, to Netherlands, PL, to Spain, to Italy, to Germany, to Austria, RU, IL, to Mexico, to New Zealand, PH, SG, to Switzerland, NO, SA, UA, AE, QA, KW, BH, HR, MY, TR, BR, CL, CO, CR, PA, TT, GT, HN, JM.
  • Brand: Masspower
  • Model: SUN-2000G2-LCD
  • Country/Region of Manufacture: China

LCD Display 2000W MPPT Solar Grid Tie Inverter Pure Sine Wave DC45-90V TO AC230V
Category: display | Comments Off
March 29

SOLAREDGE SE20K-US 20KW THREE PHASE TRANSFORMERLESS GRID TIE INVERTER, 480V

SOLAREDGE SE20K-US 20KW THREE PHASE TRANSFORMERLESS GRID TIE INVERTER, 480V
SOLAREDGE SE20K-US 20KW THREE PHASE TRANSFORMERLESS GRID TIE INVERTER, 480V
SOLAREDGE SE20K-US 20KW THREE PHASE TRANSFORMERLESS GRID TIE INVERTER, 480V
SOLAREDGE SE20K-US 20KW THREE PHASE TRANSFORMERLESS GRID TIE INVERTER, 480V

SOLAREDGE SE20K-US 20KW THREE PHASE TRANSFORMERLESS GRID TIE INVERTER, 480V
This inverter was opened and mounted as a display, but was never used. There are 2 holes that have been punched out on the knock-out holes. The SD card is still with the box along with the mounting bracket. 20kW Transformerless Three Phase Inverter SE20KUS-480. DC-AC PV inverter is specifically designed to work with the SolarEdge power optimizers. Because MPPT and voltage management are handled separately for each module by the power optimizer, the inverter is only responsible for DC to AC inversion. The fixed-voltage technology ensures the solar inverter is always working at its optimal input voltage over a wider range of string lengths and regardless of environmental conditions. A proprietary data monitoring receiver has been integrated into the inverter and aggregates the power optimizer performance data from each PV module. This data can be transmitted to the web and accessed via the SolarEdge Monitoring Portal for performance analysis, fault detection and troubleshooting of the PV system. Increased energy yield compared to traditional inverter systems. No power loss due to module mismatch due to power optimization per module. Constraint-free design allows for utilization of more roof area. Easy and cost efficient maintenance for increased up-time of your PV system. During Installation: safe string voltage until inverter & AC supply are turned on. Maintenance: safe string voltage with an automatic DC shutdown once inverter is turned off. Emergency: safe string voltage with an automatic DC shutdown after grid disconnection or in reaction to high temperature. Ability to monitor the PV system anytime, anywhere in order to guarantee optimal operation. Module level, real-time alerts of system issues pinpointed on a virtual map. Max Power per String = 6000 watts (208V) or 12,750 watts (480V). Integrated arc fault protection (Type 1) for NEC 2011 690.11 compliance. Pre-assembled DC disconnect/safety switch for faster installation. Small, lightweight and easy to install, by a single person on supplied bracket. Outdoor and indoor installation – IP65 / NEMA 3R. Fixed string voltage – allows for easier design with uneven string lengths, resulting in optimal inverter efficiency, reliability, and reduced install costs. Module level MPPT – prevents energy loss due to module mismatch or partial shading; more quickly reacts to changes in sun irradiance and temperature, minimizing power loss on cloudy days, and increasing overall energy yield. Built-in communication gateway with LAN and wireless connectivity options enable easy broadband connection to a remote monitoring server. Free monitoring for 25 years. Optional Rapid Shutdown functionality for NEC 2014 690.12. The item “SOLAREDGE SE20K-US 20KW THREE PHASE TRANSFORMERLESS GRID TIE INVERTER, 480V” is in sale since Tuesday, March 29, 2016. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “solarclam-p” and is located in Philadelphia, Pennsylvania. This item can be shipped to United States.
SOLAREDGE SE20K-US 20KW THREE PHASE TRANSFORMERLESS GRID TIE INVERTER, 480V
Category: solaredge | Comments Off
March 29

4pcs 260w grid tie inverter dc22-50v with CABLE for 1kw solar system -US ship

4pcs 260w grid tie inverter dc22-50v with CABLE for 1kw solar system -US ship

4pcs 260w grid tie inverter dc22-50v with CABLE for 1kw solar system -US ship
AC90-260v, dc22-50v use PV system +2M. Using IP67 waterproof streamline design, Can effectively prevent rainwater on the surface erosion, Built-in high-performance Maximum Power Point Tracking(MPPT)Function, Better able to track changes in the solar luminosity and control different output power, Effectively capture and collect sunlight. AC electric power transmission using the reverse transmission technology, Is one of our patented technology, The inverter output power can provide load priority use, Extra electricity to the grid, Efficient use of the inverter to the power emitted, Electricity transmission rate of up to 99%. In order to achieve higher power, we can use this inverter in stack. For example: 10 pcs of 260W grid tie inverter used in stack can achieve 2600W. And the stacking number is unlimited. Items u may need modem and filter. The packing box at this. Build the monitor system. If you want moden + filter. Please check my store list. Please install the inverters according to the user manual and connnet the groud safety. Forbid openning the shell with non-professional person , only qualified maintenance person can repair the product. The inverter should be installed in the low humidity and well ventilated place, and remove the flammable things surrounding the inverter for avoiding overheating. Avoid children play when the inverter is working. Ensure the DC input and AC output when connect with PV. The Vmp and Voc of PV should be fuit for the prodcut for get output max. Why Is The Micro Inverter. The transition from a centralized to a distributed inverter optimizes energy collection. The converter module integrated into the solar panels can reduce installation costs. Soft switch technology to replace hard-switching technology can improve efficiency and reduce heat dissipation. From cottage industry to mass production, standardized design (hardware and software) to improve reliability and reduce costs. Using a special capacitor (due to the high failure rate). Design requires a higher voltage to reduce the current, we use a special electrolytic capacitors. The converter can be connected to the grid to eliminate the need for many battery applications. The high price of batteries, require maintenance, life expectancy is shorter. Work required micro-inverter power increasingly smaller (only a few hundred watts), which can reduce the internal temperature and improve reliability. Micro-inverter solar inverter system needs to deal with a lot of a particular power level, in order to increase production, thereby reducing costs. Solar grid tie inverter 1pc. Your praise is very important to us. So when you received goods and satisfied with our goods please give our good feedback. If you have any question, please immediately inform us. We will together with you to solve as soon as possible. I hope that every time we communicate happily. If you are not satisfied our items or our item demage. Inverter were used or damaged or deformed or altered in any ways are not acceptable. The item “4pcs 260w grid tie inverter dc22-50v with CABLE for 1kw solar system -US ship” is in sale since Monday, March 28, 2016. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “honestshop516″ and is located in MO. This item can be shipped to United States, to Canada, to United Kingdom, DK, RO, SK, BG, CZ, FI, HU, LV, LT, MT, EE, to Australia, GR, PT, CY, SI, to Japan, to China, SE, KR, ID, to Taiwan, ZA, TH, to Belgium, to France, to Hong Kong, to Ireland, to Netherlands, PL, to Spain, to Italy, to Germany, to Austria, RU, IL, to Mexico, to New Zealand, PH, SG, to Switzerland, NO, SA, UA, AE, QA, KW, BH, HR, MY, TR, BR, CL, CO, CR, PA, TT, GT, HN, JM.
  • Brand: KD
  • Model: WVC260
  • Country/Region of Manufacture: China

4pcs 260w grid tie inverter dc22-50v with CABLE for 1kw solar system -US ship
Category: 4pcs | Comments Off
March 28

SATCON SOLAR GRID TIE INVERTER PVS-50 50KW 208/240/480V

SATCON SOLAR GRID TIE INVERTER PVS-50 50KW 208/240/480V
SATCON SOLAR GRID TIE INVERTER PVS-50 50KW 208/240/480V
SATCON SOLAR GRID TIE INVERTER PVS-50 50KW 208/240/480V
SATCON SOLAR GRID TIE INVERTER PVS-50 50KW 208/240/480V
SATCON SOLAR GRID TIE INVERTER PVS-50 50KW 208/240/480V

SATCON SOLAR GRID TIE INVERTER PVS-50 50KW 208/240/480V
With their advanced system intelligence, next-generation Edge MPPT technology, and industrial-grade engineering, PowerGate Plus inverters maximize system uptime and power production, even in cloudy conditions. Provides rapid and accurate control that boosts PV plant kilowatt yield. Provides a wide range of operation across all photovoltaic cell technologies. Printed Circuit Board Durability. Wide thermal operating range: -40C°(-40° F) to 85° C (185° F). Conformal coated to withstand extreme humidity and air-pollution levels. Rugged and reliable, Satcon S-Type PV inverters are engineered from the ground up to meet the demands of large-scale installations. Modular components make service efficient. UBS Seismic Zone 4 compliant. Built-in DC and AC disconnect switches. Integrated DC two-pole disconnect switch isolates the inverter (with the exception of the GFDI circuit) from the photovoltaic power system to allow inspection and maintenance. Protective covers over exposed power connections. With all components encased in a single, space-saving enclosure, Satcon S-Type PV inverters are easy to install, operate, and maintain. Single Cabinet with Small Footprint. Convenient access to all components. Large in-floor cable glands make access to DC and AC cables easy. Engineered for outdoor environments. Matches the output voltage of the PV inverter to the grid. Maximum DC Input Voltage. Maximum DC Input Current. Continous AC Power Output. PowerGate Plus PVS-50 50kW 208VAC. Safety Ratings & Certifications. 1547, C62.41.2, C62.45, C37.90.1, C37.90.2. The item “SATCON SOLAR GRID TIE INVERTER PVS-50 50KW 208/240/480V” is in sale since Friday, March 25, 2016. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “fred480v” and is located in Michigan City, Indiana. This item can be shipped to United States.
  • Brand: SATCON
  • Model: PVS-50
  • MPN: Does Not Apply
  • Country/Region of Manufacture: China

SATCON SOLAR GRID TIE INVERTER PVS-50 50KW 208/240/480V
Category: satcon | Comments Off
March 28

LCD Wind Turbine/Generator Grid Tie Inverter with Domp Load Controller/Resistor

LCD Wind Turbine/Generator Grid Tie Inverter with Domp Load Controller/Resistor
LCD Wind Turbine/Generator Grid Tie Inverter with Domp Load Controller/Resistor
LCD Wind Turbine/Generator Grid Tie Inverter with Domp Load Controller/Resistor

LCD Wind Turbine/Generator Grid Tie Inverter with Domp Load Controller/Resistor
500W 600W 1000W 1500W 2000W. Wind Power Grid Tie Inverters. For 3 Phase Wind Turbine/ Generator directly. Built in Dump Load Controller / Resistor included. Input Voltage : DC22V-60V or DC45V or DC90V. Output Voltate :AC 110V / 120V / 220V / 230V /240V. Input DC/AC Voltage Range. 10.8V 30V or 22V 60V. 22V 60V or 45V90V. AC Output Voltage Range (Option). 90VAC 130VAC or 190VAC 260VAC. Dimensions (W x H x D). 295 x 190 x 100 mm. Any question , please feel free to contact me. The item “LCD Wind Turbine/Generator Grid Tie Inverter with Domp Load Controller/Resistor” is in sale since Wednesday, March 23, 2016. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “new-power2010″ and is located in ShangHai. This item can be shipped worldwide.
  • Brand: SUN
  • MPN: SUN-WAL-LCD
  • Country/Region of Manufacture: China

LCD Wind Turbine/Generator Grid Tie Inverter with Domp Load Controller/Resistor
Category: wind | Comments Off
March 27

1500W LCD mppt solar grid tie inverter DC45-90V AC 230V

1500W LCD mppt solar grid tie inverter DC45-90V AC 230V

1500W LCD mppt solar grid tie inverter DC45-90V AC 230V
THIS INVERTER INCLUDES LCD. PLEASE INDICATE YOUR COUNTRY VOLTAGE AND THIS DOES NOT INCLUDE THE LIMITER BUT CAN WORK WITH THE LIMITER. IF YOU ARE INTERESTED IN THE LIMITER PLEASE INDICATE. The grid tie inverters. (GTI) can generate so that the amount of excess power produced by the solar panels are. Reduced to insignificant levels, if not eliminated — because in some countries. The producer pays for the excess power it gives to the distribution grid. Is because the electric power meters the one provided by the electricity provider in the. Area are not aware of the direction of power flow. In other words it only adds even if. Power is exported to the grid, thus, the consumers will be charged for power even if it is. Given to the grid, and this is the problem. On-Grid System Using Standard Grid Tie Inverter. The Grid Tie inverter converts DC power produced by Solar Panels to AC, connects to the grid and feed all of the power available from the panels. To the AC load. All excess power that is not needed by the load is then exported to the Grid. If the Grid fails, then the Grid Tie Inverter will turn off. When the Grid comes back on line. The Grid Tie Inverter will again supply power to the load and any excess power is exported to the Grid again. If the Solar Panel is producing less power and the GTI cannot deliver all the power needed by the load, then power. Will be supplemented by the Grid. Power Meters (Except smart meter) are not aware of the direction of Power flow. The user then pays for the power exported and delivered by the Grid. On-Grid System Using Grid Tie Inverter With Limiter (GTIL). The Grid Tie Inverter with Limiter delivers only the power needed by the load and prevents delivering excess power hence avoids excess power in going back to the Grid. The heart of the Grid Tie Inverter with Limiter is the Limiter Module (LM). The LM continuously sampled the power needed by the load through the current sensor connected after the Main Circuit Breaker. The LM then will process the signal. It then sends signal to Grid Tie Inverter how much power to deliver to the load in real time. The user, after installing and connecting the GTIL correctly, need not do anything and the unit will do its work automatically. The Limiter Module-Parts Description. Displays the Utility Power (grid power), Inverter Power (GTIL power), Utility KWH and Inverter KWH. AC Receptacle For GTIL AC output. Two (2 pcs) – Connects the AC output of GTIL to LM. Can be plug in either receptacle. Maximum Power per receptacle is 2kw or a total of 4kw GTIL can be plugged in the two receptacles. The output of GTIL can also be directly connected to the grid or through the house convenient outlet. But the LCD will not display the Inverter Power. Connects/clamps to one hot wire after the Main Circuit Breaker. Converts the magnetic field created by the flow of current in the wire into small AC voltage and current which is proportional to the power that passes through the wire. Clamp sensor AC signal socket connects the clamp sensor AC signal to the LM module. Terminal Block- AC power to Grid. The AC output of the GTIL is plugged to the LM receptacle in order for the LCD to display the GTIL output in watts and KWH. The GTIL output is connected to the Grid through the Terminal Block. Connecting the terminal block to AC grid also powers the wattmeter and limiter circuit. Limiter DC Signal Output, 2 pcs Connects the LM output signal to the GTIL signal input. User can connect to any of the signal output receptacle. This is the ideal installation. The GTIL unit and the Limiter Module are placed close to each other. The signal wires will be short, as supplied with the unit. Use a dedicated 20 A breaker for the GTIL in the Load Circuit breaker panel board. Wiring and Connection Procedure. After the GTIL and LM are properly installed. Shut off the main circuit breaker. Connect the clamp sensor to one hot wire after the main breaker. Connect the other end of clamp sensor signal cable to the LM. Neatly lay out the signal cable. You can now safely open the Main breaker. Connect the LM module to grid. Using the terminal block, use atleast wire no. 12 AWG (20A ampacity – wire not included in the package) and connect to 20A circuit breaker dedicated for the GTIL. Make sure the 20A breaker is off while wiring. Do not turn on the breaker! Connect the DC signal cable from LM to GTIL input. The connectors have threaded screw to securely fasten the connectors plug at both ends of the cable. Also the connector plugs have dent/slot in the plugs body so it can only be connected in one direction or position. Connect the Solar panel output to the DC power input of GTIL. Make sure the disconnect switch/breaker of solar panel is off. Review all connections and make sure of the tightness of plugs and connections. Re-check DC polarity connections of solar panel. Turn on the 20A circuit breaker to power the Limiter Module. In the LM, Press SET button below the LCD for a few seconds. The LCD will light up and initialize. After initialization, LCD will display Utility Power, which is the actual power or total load in real time. Press the up and down buttons to display the Inverter Power, Utility power, Utility Total KWH and Inverter Total KWH. Inverter Power should read zero initially. To reset the Utility Total, just press the up button for a few seconds and you will be prompted yes or no to reset. Press up or down button to select either yes or no, and then press SET to reset. To reset Inverter Total, press the down button continuously and you will prompted yes or no also to reset. Press up or down to select yes or no and Press SET to reset. Connect the GTIL power output to the LM AC receptacle using the supplied cable. Turn on the disconnect switch/dc breaker of solar panel. The wattmeter in the GTIL should power up and start producing power after a minute or two. Check the LM display. The utility power should display 0-15w indicating the GTIL is already supplying power to the load. Check the inverter power display in the LCD. To shutdown, turn-off or unplug first the GTIL before disconnecting the power to limiter module. Or shut off the breaker to LM module to cut power to whole set-up. Do not disconnect Solar panel connection to GTIL while the system is operating. In normal operation, when the unit is started or the LM breaker is turned on, while all the cables are connected and DC breaker is on, there will be about 2 minutes and 20seconds time delay before the GTIL unit will run. Always remember that for LM module to power-up, need to press Set buttons first in the LM module for the system to run. Remote Installation of GTIL and LM. Users may require that GTIL will need to be remotely installed or away from the Circuit Breakers Panel Board. In so doing, the Signal cable will need to be made much longer. The maximum cable length that can be used is 30m. The item “1500W LCD mppt solar grid tie inverter DC45-90V AC 230V” is in sale since Tuesday, November 10, 2015. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “jadoni1982″ and is located in Ningbo, Zhejiang. This item can be shipped to United States.
  • Brand: Ecopower
  • MPN: MP
  • Country/Region of Manufacture: China

1500W LCD mppt solar grid tie inverter DC45-90V AC 230V
Category: 1500w | Comments Off
March 27

600W 1200W 110V waterproof grid tie inverter MPPT function MC4 for solar panel

600W 1200W 110V waterproof grid tie inverter MPPT function MC4 for solar panel
600W 1200W 110V waterproof grid tie inverter MPPT function MC4 for solar panel
600W 1200W 110V waterproof grid tie inverter MPPT function MC4 for solar panel
600W 1200W 110V waterproof grid tie inverter MPPT function MC4 for solar panel
600W 1200W 110V waterproof grid tie inverter MPPT function MC4 for solar panel
600W 1200W 110V waterproof grid tie inverter MPPT function MC4 for solar panel
600W 1200W 110V waterproof grid tie inverter MPPT function MC4 for solar panel
600W 1200W 110V waterproof grid tie inverter MPPT function MC4 for solar panel
600W 1200W 110V waterproof grid tie inverter MPPT function MC4 for solar panel
600W 1200W 110V waterproof grid tie inverter MPPT function MC4 for solar panel

600W 1200W 110V waterproof grid tie inverter MPPT function MC4 for solar panel
600W/1200W waterproof grid tie inverter MPPT function. Eco-Worthy 600W/1200W 24V 220V grid tie waterproof inverter , with MC4 waterproof interface suitable for outdroor installation. One waterproof inverter which power and output voltage you have select. 1 pouch of screw for micro inverter installation. Please connect the inverter following the operation instruction show above. If have any question please contact with relative persons. Non-professionals do not disassemble. Only qualified personnel may repair this product. Please install inverter in the low humidity and well-ventilated place to avoid the inverter over-heating, and clear around the inflammable and explosive materials. When using this product, avoid children touching, playing, to avoid electric shock. Connected solar panels, battery or wind generators DC input DC power supply cable. Recommend use PV panels. 600W / Vmp>34V / Voc<50V. 4300W / Vmp>34V / Voc<50V. DC MAX input current. AC MAX output power. DC MAX Open-circuit input-voltage. DC input voltage range. MAX output power factor. DC input Reverse voltage protection. AC output voltage range. 49.3-50.5 Hz. Output short circuit protection. Power line carrier-current communication. DIN VDE 1026 UL1741. Power line carrier-current communicationthis is optional function, please confirm the spec outside the box first. By using electric power as a carrier of AC alternating current, can modulate high-frequency and carrier frequency (60KHz) in AC wire transmission and can achieve the communication/ newsletter between inverters or between inverter and computer. And it can transfer the power data. Also monitor all functions of inverter. Carrier frequency 60KHZ(Frequency customizable). Interface way TTL level serial interface. Serial rate 9600PS(Can customize according to customer's request). 6-grade power search ---In overcast weather, the PV Panel's output current is extremely tiny, then inverter will automatic pen 6-grade power search function, and keep output efficient and steady during the low power. Wide voltage input(22-50VDC) --- 1. DC voltage input:2250VDC; 2. Second level power variable voltage conversion. High-frequency two-way and one-way grid function ---1. High frequency direct modulation, AC half wave synthesis; 2. Two-way grid means: Load consume directly. And can reverse AC current transmission. Kinds of frequency output function ---1. It can apply to 50Hz and 60Hz frequency of AC; 2. Frequency range: 45Hz 64Hz. Directly connected to the solar panels (do not need to connect the battery). AC 0 angle with high precision auto-detection ---High-precision analysing the AC phase angle. The phase shift rate is less than 1%, thus achieve high-precision with phase modulation AC output together. AC phase shift: < 1%; 2. Over-zero protection: 0.2 VAC; 3. AC switching: 50Hz / 60Hz. Synchronous High -frequency Modulation. Modulation synthesis: half wave and full-bridge modulation synthesis (100Hz / 120Hz). Synthetic way: MOSFET full-bridge; 3. Pure Sine Wave Output ---Use SPWM directly to make pure sine wave output. Output waveform: Adopt complementary PWM to push-pull pure sine wave; 2. Generate means: enhancement-mode SPWM. Power Automatically Locked (APL) --- automatically powers locked in maximum power point, made output more stable. Constant Current, Constant Power ---constant current and output power, without any overload, over-current phenomenon. Exactly and timely automatic Island Effect Protection. High-Frequency High Conversion Rate --- Adapt high frequency converter, the output more efficient. Maximum Power Point Tracking (MPPT) --- high-precision (MPPT) operation power, automatic and immediate adjust the solar panels output power at the maximum output point, made the inverter discharge to power grid with the highest efficiency. Stack using ---Such as: 4 micro inverter of 260W stacking can achieve 1040W. The number of the stacking is unlimited. DC input ---Input voltage range: 22V to 50V, PV Panel: Recommend using the power more than 30W and the standard voltage of 36V PV panels. Suggestion making the PV in parallel. AC output ---220VAC: 180V - 262V, 50HZ; 110V AC: 80V - 160V , 60HZ. Business is warmly welcomed. Company bank account of many currency such as USD, EURO, GBP. Is the best way for bulk order. We would be appreciated that you provide us with your bank information. Goods in stock in USA, goods will be set by UPS. Or USA customers the most important thing. Whenever you feel confuse or trouble , please don't hesitate to let us know, we will try our best to help you at first time we receive you message. We strive to serve our customers and resolve any issues. If your shopping experience with us is anything less than five stars. We will appreciate any oppertunities to correct any issues you have before you leave feedback. Pls visit my store. We appreciate your business and consideration. We are manufacturers and wholesalers of solar panels and renewable energy products. Ur solar business has been established since 2002. OEM and ODM services are both available. We would like to be your best supplier in China. Be the first to learn about new products and great deals by liking us on Facebook. Scan QR code, follow us Facebook. Please take our working time into account. We will reply you in time, if you are in our working time. If you don't receive our reply within one days, We must be out of work. Please contact me through. Public holidays in China is not available for message reply. Here is the China Public Holiday list. New Year's Day. The item "600W 1200W 110V waterproof grid tie inverter MPPT function MC4 for solar panel" is in sale since Wednesday, November 11, 2015. This item is in the category "Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters". The seller is "renshuiyuan" and is located in Rosemead, California. This item can be shipped worldwide.
  • Brand: ECO-WORTHY
  • Model: Grid tie waterproof inverter
  • Fit for: 2*18V or 36V solar panel
  • max input voltage for 1 pair MC4: 300Watt
  • output voltage: 110V AC
  • MPN: Does not apply

600W 1200W 110V waterproof grid tie inverter MPPT function MC4 for solar panel
Category: 600w | Comments Off