USA Support. Hybrid PIP LV2424 2400W 24V 120V/240V Inverter Split Phase(2 rqd)

NOTE : TWO INVERTERS are required for split phase operation, as well as a parallel kit for each inverter. (One inverter per phase). USA Stock is import duty free! Now supports Wifi remote monitoring on the www. Manuals can be found here. This is a listing for ONE Hybrid LV2424 3kVA 2400W 110/120V inverter , 80A MPPT solar charger, and built in 60A Utility charger to keep your batteries charged if the Sun is inadequate, or your batteries are just running low in the middle of the night. Runs on a 24VDC Battery bank. LiFePO4 + Lithium Ion support. Supports grid tie and off grid functionality not UL Listed. 1 2400 W Pure Sine wave output expandable up to 9 units (21.6 kW). 2 2kW MPPT Solar Charge controller. 3 60 A Utility Battery Charger In case your battery level falls below your setpoint. 4 UPS function, wire it to the Utility power, if battery power is too low, the system automatically switches the load to Utility power. 5 Single 120V 60Hz , Split phase (120V – 0 – 120V) and 3 phase capable (requires parralel board for each unit). 5.5 Grid Tie function (Anti Islanding, – Note: This inverter is NOT UL listed in the USA, for DIY enthusiast only, it is CE listed for European markets) – Send your excess power to slow your existing meter, once batteries are fully charged. If you need two units for split phase operation, see our split phase listing. This unit excludes the parallel module, whereas the other bundled listings includes it. This unit will operate just fine on its own for single phase 110V/120V, and is upgradable / stackable for future single / split phase or three phase operation. An excellent start to grow your installation, or if you just simply need one more inverter to add to your existing array. Stackable up to 9 units in any configuration up to 2.4kW x 9 = 21.6kW. 120V USA Models Comparison Sheet. After 1 year, offer spare part modules at reasonable pricing. Output Power in Watts (Pure Sine wave). Output Power in VA. Output Surge Capacity for 5 seconds. Output Voltage AC – Single Inverter Configuration. Output Voltage AC – Multiple Inverter Configuration. Single, 2 and 3 Phase. 1, Split 120/240V, 2 & 3 Ph. 1, Split, 2 & 3 Ph. Supports 50 and 60 Hz. Parallelable Daisy chain multiple units. Yes, 6 units-14.4kW max. Yes, 9 Units21.6 kW max. Yes- 3 Units 15kW max. Split Phase support (L1-120V , N, L2-120V) 240V / L1 & L2, 180 Deg. Yes, 2 or more units. Yes In Same unit. Two Phase Output 120V and 208V 120 Deg. Yes, 1 or more units. Three Phase Output 120V and 208V 120 Deg. Yes, 3 or more units. Optional Grid Feedback excess energy (Anti Islanding). Generator Dry Contact Relay Start / Stop / Alarm / User Def. MPPT Solar Input Voltage Range. MPPT Solar Input Max Voc(open circuit volts). MPPT Max Watts Solar Input. 8kW (4000W x 2). MPPT Max battery Charging Current. 160A (80A x 2). Min Battery Voltage for Solar Charging. Utility Max Charging Current. Utility + Solar max Current. Utility Bypass Max Current (Utility switched to Load). Communication Port, USB, RS232. Software Support (MAC, Windows 7-10, Linux). Wifi Communication Module compatible. Operating Temp F / C. Operating Humidity (Non Condensing). Net Weight lb / Kg. Dimensions in / cm. 3 Step Charging Algorithm (Bulk / Absorb/ Float). Lithium & LiFePO4 support (USER Mode). USER definable battery parameters. Absolute Min Cutoff Voltage. Min Cold Start Voltage. Max Charging Amps Solar + Utility. Absolute Minimum Batt Ah capacity. Recommended Min Batt Ah capacity. Energy Saving (Utility provides power as last priority). SOL – Solar 1st + Battery Assist 2nd , Utility Assist 3rd. UPS Mode (Solar and Battery only if no Utility). Utl – Utility 1st, Solar 2nd + Battery 3rd. Hybrid Energy & UPS mode Programmable battery Level. SbU Solar 1st + Battery 2nd /Level, Utility 3rd. CSO Solar 1st, Utility 2nd. Cut Utility 1st, Solar 2nd. SNU Solar + Utility together. Approximate battery Back-up Time (minutes). Load 500-VA (400W) with 100Ah Battery. Load 1000-VA (800W) with 100Ah Battery. Load 2000-VA (1600W) with 100Ah Battery. Load 3000-VA (2400W) with 100Ah Battery. Load 500-VA (400W) with 200Ah Battery. Load 1000-VA (800W) with 200Ah Battery. Load 2000-VA (1600W) with 200Ah Battery. Load 3000-VA (2400W) with 200Ah Battery. Load 500-VA (400W) with 400Ah Battery. Load 1000-VA (800W) with 400Ah Battery. Load 2000-VA (1600W) with 400Ah Battery. Load 3000-VA (2400W) with 400Ah Battery. The item “USA Support. Hybrid PIP LV2424 2400W 24V 120V/240V Inverter Split Phase(2 rqd)” is in sale since Monday, November 16, 2020. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “usa-mpp-solar” and is located in Mount Pleasant, Utah. This item can be shipped worldwide.

Inverter Technology: Hybrid
Model: Hybrid LV 2424
Country/Region of Manufacture: Taiwan
Wattage: 2400
System Configuration: Grid-Tie
Features: LCD Display
Color: Green
MPN: Hybrid LV 2424
Recommended Environment: Indoor
Protection Properties: Anti-Island Protection
Brand: MPP SOLAR
Voltage Output: 120V / 240Vac
UPC: Does not apply

Category: support | Comments Off

July 8

USA Stock. LV2424 Hybrid 2 x 2400W 24V 120V Solar Inverter Split Phase bundle

NOTE : This listing is for TWO INVERTERS which are required for split phase operation, as well as a parallel kit for each inverter. (One inverter per phase). USA Stock is import duty free! Now supports Wifi remote monitoring on the www. Manuals can be found here. This is a listing for ONE Hybrid LV2424 3kVA 2400W 110/120V inverter , 80A MPPT solar charger, and built in 60A Utility charger to keep your batteries charged if the Sun is inadequate, or your batteries are just running low in the middle of the night. Runs on a 24VDC Battery bank. LiFePO4 + Lithium Ion support. Supports grid tie and off grid functionality not UL Listed. Per Inverter Specs (this listing is for 2 pcs). 1 2400 W Pure Sine wave output expandable up to 9 units (21.6 kW). 2 2kW MPPT Solar Charge controller. 3 60 A Utility Battery Charger In case your battery level falls below your setpoint. 4 UPS function, wire it to the Utility power, if battery power is too low, the system automatically switches the load to Utility power. 5 Single 120V 60Hz , Split phase (120V – 0 – 120V) and 3 phase capable (requires parralel board for each unit). 5.5 Grid Tie function (Anti Islanding, – Note: This inverter is NOT UL listed in the USA, for DIY enthusiast only, it is CE listed for European markets) – Send your excess power to slow your existing meter, once batteries are fully charged. If you need two units for split phase operation, see our split phase listing. This unit excludes the parallel module, whereas the other bundled listings includes it. This unit will operate just fine on its own for single phase 110V/120V, and is upgradable / stackable for future single / split phase or three phase operation. An excellent start to grow your installation, or if you just simply need one more inverter to add to your existing array. Stackable up to 9 units in any configuration up to 2.4kW x 9 = 21.6kW. 120V USA Models Comparison Sheet. After 1 year, offer spare part modules at reasonable pricing. Output Power in Watts (Pure Sine wave). Output Power in VA. Output Surge Capacity for 5 seconds. Output Voltage AC – Single Inverter Configuration. Output Voltage AC – Multiple Inverter Configuration. Single, 2 and 3 Phase. 1, Split 120/240V, 2 & 3 Ph. 1, Split, 2 & 3 Ph. Supports 50 and 60 Hz. Parallelable Daisy chain multiple units. Yes, 6 units-14.4kW max. Yes, 9 Units21.6 kW max. Yes- 3 Units 15kW max. Split Phase support (L1-120V , N, L2-120V) 240V / L1 & L2, 180 Deg. Yes, 2 or more units. Yes In Same unit. Two Phase Output 120V and 208V 120 Deg. Yes, 1 or more units. Three Phase Output 120V and 208V 120 Deg. Yes, 3 or more units. Optional Grid Feedback excess energy (Anti Islanding). Generator Dry Contact Relay Start / Stop / Alarm / User Def. MPPT Solar Input Voltage Range. MPPT Solar Input Max Voc(open circuit volts). MPPT Max Watts Solar Input. 8kW (4000W x 2). MPPT Max battery Charging Current. 160A (80A x 2). Min Battery Voltage for Solar Charging. Utility Max Charging Current. Utility + Solar max Current. Utility Bypass Max Current (Utility switched to Load). Communication Port, USB, RS232. Software Support (MAC, Windows 7-10, Linux). Wifi Communication Module compatible. Operating Temp F / C. Operating Humidity (Non Condensing). Net Weight lb / Kg. Dimensions in / cm. 3 Step Charging Algorithm (Bulk / Absorb/ Float). Lithium & LiFePO4 support (USER Mode). USER definable battery parameters. Absolute Min Cutoff Voltage. Min Cold Start Voltage. Max Charging Amps Solar + Utility. Absolute Minimum Batt Ah capacity. Recommended Min Batt Ah capacity. Energy Saving (Utility provides power as last priority). SOL – Solar 1st + Battery Assist 2nd , Utility Assist 3rd. UPS Mode (Solar and Battery only if no Utility). Utl – Utility 1st, Solar 2nd + Battery 3rd. Hybrid Energy & UPS mode Programmable battery Level. SbU Solar 1st + Battery 2nd /Level, Utility 3rd. CSO Solar 1st, Utility 2nd. Cut Utility 1st, Solar 2nd. SNU Solar + Utility together. Approximate battery Back-up Time (minutes). Load 500-VA (400W) with 100Ah Battery. Load 1000-VA (800W) with 100Ah Battery. Load 2000-VA (1600W) with 100Ah Battery. Load 3000-VA (2400W) with 100Ah Battery. Load 500-VA (400W) with 200Ah Battery. Load 1000-VA (800W) with 200Ah Battery. Load 2000-VA (1600W) with 200Ah Battery. Load 3000-VA (2400W) with 200Ah Battery. Load 500-VA (400W) with 400Ah Battery. Load 1000-VA (800W) with 400Ah Battery. Load 2000-VA (1600W) with 400Ah Battery. Load 3000-VA (2400W) with 400Ah Battery. The item “USA Stock. LV2424 Hybrid 2 x 2400W 24V 120V Solar Inverter Split Phase bundle” is in sale since Monday, June 29, 2020. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “usa-mpp-solar” and is located in Mount Pleasant, Utah. This item can be shipped to North, South, or Latin America.

Brand: MPP SOLAR
Model: Hybrid LV 2424*2
Type: MPPT Charge Controller
System Configuration: Hybrid
Power: Greater Than 2000 W
Voltage: 24 V to 110V/220V split phase
Application: Recreational Vehicle (RV)
Charging Mode: MPPT (Maximum Power Point Tracking)
Current Output: 20-29 A
MPN: Hybrid LV 2424*2
Features: LCD Display
Current Rating: 21-30 A

Category: stock | Comments Off

June 9

Ships 13 July. Hybrid PIP LV2424 2400W 24V 120V/240V Inverter Split Phase(2 rqd)

NOTE:: The Virus is causing supply chain havoc in almost every industry. And we are not an exception. NOTE : TWO INVERTERS are required for split phase operation, as well as a parallel kit for each inverter. (One inverter per phase). USA Stock is import duty free! Now supports Wifi remote monitoring on the www. Manuals can be found here. This is a listing for ONE Hybrid LV2424 3kVA 2400W 110/120V inverter , 80A MPPT solar charger, and built in 60A Utility charger to keep your batteries charged if the Sun is inadequate, or your batteries are just running low in the middle of the night. Runs on a 24VDC Battery bank. LiFePO4 + Lithium Ion support. Supports grid tie and off grid functionality not UL Listed. 1 2400 W Pure Sine wave output expandable up to 9 units (21.6 kW). 2 2kW MPPT Solar Charge controller. 3 60 A Utility Battery Charger In case your battery level falls below your setpoint. 4 UPS function, wire it to the Utility power, if battery power is too low, the system automatically switches the load to Utility power. 5 Single 120V 60Hz , Split phase (120V – 0 – 120V) and 3 phase capable (requires parralel board for each unit). 5.5 Grid Tie function (Anti Islanding, – Note: This inverter is NOT UL listed in the USA, for DIY enthusiast only, it is CE listed for European markets) – Send your excess power to slow your existing meter, once batteries are fully charged. If you need two units for split phase operation, see our split phase listing. This unit excludes the parallel module, whereas the other bundled listings includes it. This unit will operate just fine on its own for single phase 110V/120V, and is upgradable / stackable for future single / split phase or three phase operation. An excellent start to grow your installation, or if you just simply need one more inverter to add to your existing array. Stackable up to 9 units in any configuration up to 2.4kW x 9 = 21.6kW. 120V USA Models Comparison Sheet. After 1 year, offer spare part modules at reasonable pricing. Output Power in Watts (Pure Sine wave). Output Power in VA. Output Surge Capacity for 5 seconds. Output Voltage AC – Single Inverter Configuration. Output Voltage AC – Multiple Inverter Configuration. Single, 2 and 3 Phase. 1, Split 120/240V, 2 & 3 Ph. 1, Split, 2 & 3 Ph. Supports 50 and 60 Hz. Parallelable Daisy chain multiple units. Yes, 6 units-14.4kW max. Yes, 9 Units21.6 kW max. Yes- 3 Units 15kW max. Split Phase support (L1-120V , N, L2-120V) 240V / L1 & L2, 180 Deg. Yes, 2 or more units. Yes In Same unit. Two Phase Output 120V and 208V 120 Deg. Yes, 1 or more units. Three Phase Output 120V and 208V 120 Deg. Yes, 3 or more units. Optional Grid Feedback excess energy (Anti Islanding). Generator Dry Contact Relay Start / Stop / Alarm / User Def. MPPT Solar Input Voltage Range. MPPT Solar Input Max Voc(open circuit volts). MPPT Max Watts Solar Input. 8kW (4000W x 2). MPPT Max battery Charging Current. 160A (80A x 2). Min Battery Voltage for Solar Charging. Utility Max Charging Current. Utility + Solar max Current. Utility Bypass Max Current (Utility switched to Load). Communication Port, USB, RS232. Software Support (MAC, Windows 7-10, Linux). Wifi Communication Module compatible. Operating Temp F / C. Operating Humidity (Non Condensing). Net Weight lb / Kg. Dimensions in / cm. 3 Step Charging Algorithm (Bulk / Absorb/ Float). Lithium & LiFePO4 support (USER Mode). USER definable battery parameters. Absolute Min Cutoff Voltage. Min Cold Start Voltage. Max Charging Amps Solar + Utility. Absolute Minimum Batt Ah capacity. Recommended Min Batt Ah capacity. Energy Saving (Utility provides power as last priority). SOL – Solar 1st + Battery Assist 2nd , Utility Assist 3rd. UPS Mode (Solar and Battery only if no Utility). Utl – Utility 1st, Solar 2nd + Battery 3rd. Hybrid Energy & UPS mode Programmable battery Level. SbU Solar 1st + Battery 2nd /Level, Utility 3rd. CSO Solar 1st, Utility 2nd. Cut Utility 1st, Solar 2nd. SNU Solar + Utility together. Approximate battery Back-up Time (minutes). Load 500-VA (400W) with 100Ah Battery. Load 1000-VA (800W) with 100Ah Battery. Load 2000-VA (1600W) with 100Ah Battery. Load 3000-VA (2400W) with 100Ah Battery. Load 500-VA (400W) with 200Ah Battery. Load 1000-VA (800W) with 200Ah Battery. Load 2000-VA (1600W) with 200Ah Battery. Load 3000-VA (2400W) with 200Ah Battery. Load 500-VA (400W) with 400Ah Battery. Load 1000-VA (800W) with 400Ah Battery. Load 2000-VA (1600W) with 400Ah Battery. Load 3000-VA (2400W) with 400Ah Battery. The item “Ships 13 July. Hybrid PIP LV2424 2400W 24V 120V/240V Inverter Split Phase(2 rqd)” is in sale since Sunday, June 7, 2020. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “usa-mpp-solar” and is located in Mount Pleasant, Utah. This item can be shipped worldwide.

Brand: MPP SOLAR
Model: Hybrid LV 2424
Inverter Technology: Hybrid
Voltage Output: 120V / 240Vac
Country/Region of Manufacture: Taiwan
Protection Properties: Anti-Island Protection
Recommended Environment: Indoor
Features: LCD Display
Color: Green
System Configuration: Grid-Tie
Wattage: 2400
MPN: Hybrid LV 2424
UPC: Does not apply

Category: ships | Comments Off

May 19

Shps 15 Jun. Hybrid PIP LV2424 2400W 24V 120V/240V Inverter Split Phase(2 needed)

NOTE:: The Virus is causing supply chain havoc in almost every industry. And we are not an exception. NOTE : TWO INVERTERS are required for split phase operation, as well as a parallel kit for each inverter. (One inverter per phase). USA Stock is import duty free! Now supports Wifi remote monitoring on the www. Manuals can be found here. This is a listing for ONE Hybrid LV2424 3kVA 2400W 110/120V inverter , 80A MPPT solar charger, and built in 60A Utility charger to keep your batteries charged if the Sun is inadequate, or your batteries are just running low in the middle of the night. Runs on a 24VDC Battery bank. LiFePO4 + Lithium Ion support. Supports grid tie and off grid functionality not UL Listed. 1 2400 W Pure Sine wave output expandable up to 9 units (21.6 kW). 2 2kW MPPT Solar Charge controller. 3 60 A Utility Battery Charger In case your battery level falls below your setpoint. 4 UPS function, wire it to the Utility power, if battery power is too low, the system automatically switches the load to Utility power. 5 Single 120V 60Hz , Split phase (120V – 0 – 120V) and 3 phase capable (requires parralel board for each unit). 5.5 Grid Tie function (Anti Islanding, – Note: This inverter is NOT UL listed in the USA, for DIY enthusiast only, it is CE listed for European markets) – Send your excess power to slow your existing meter, once batteries are fully charged. If you need two units for split phase operation, see our split phase listing. This unit excludes the parallel module, whereas the other bundled listings includes it. This unit will operate just fine on its own for single phase 110V/120V, and is upgradable / stackable for future single / split phase or three phase operation. An excellent start to grow your installation, or if you just simply need one more inverter to add to your existing array. Stackable up to 9 units in any configuration up to 2.4kW x 9 = 21.6kW. 120V USA Models Comparison Sheet. After 1 year, offer spare part modules at reasonable pricing. Output Power in Watts (Pure Sine wave). Output Power in VA. Output Surge Capacity for 5 seconds. Output Voltage AC – Single Inverter Configuration. Output Voltage AC – Multiple Inverter Configuration. Single, 2 and 3 Phase. 1, Split 120/240V, 2 & 3 Ph. 1, Split, 2 & 3 Ph. Supports 50 and 60 Hz. Parallelable Daisy chain multiple units. Yes, 6 units-14.4kW max. Yes, 9 Units21.6 kW max. Yes- 3 Units 15kW max. Split Phase support (L1-120V , N, L2-120V) 240V / L1 & L2, 180 Deg. Yes, 2 or more units. Yes In Same unit. Two Phase Output 120V and 208V 120 Deg. Yes, 1 or more units. Three Phase Output 120V and 208V 120 Deg. Yes, 3 or more units. Optional Grid Feedback excess energy (Anti Islanding). Generator Dry Contact Relay Start / Stop / Alarm / User Def. MPPT Solar Input Voltage Range. MPPT Solar Input Max Voc(open circuit volts). MPPT Max Watts Solar Input. 8kW (4000W x 2). MPPT Max battery Charging Current. 160A (80A x 2). Min Battery Voltage for Solar Charging. Utility Max Charging Current. Utility + Solar max Current. Utility Bypass Max Current (Utility switched to Load). Communication Port, USB, RS232. Software Support (MAC, Windows 7-10, Linux). Wifi Communication Module compatible. Operating Temp F / C. Operating Humidity (Non Condensing). Net Weight lb / Kg. Dimensions in / cm. 3 Step Charging Algorithm (Bulk / Absorb/ Float). Lithium & LiFePO4 support (USER Mode). USER definable battery parameters. Absolute Min Cutoff Voltage. Min Cold Start Voltage. Max Charging Amps Solar + Utility. Absolute Minimum Batt Ah capacity. Recommended Min Batt Ah capacity. Energy Saving (Utility provides power as last priority). SOL – Solar 1st + Battery Assist 2nd , Utility Assist 3rd. UPS Mode (Solar and Battery only if no Utility). Utl – Utility 1st, Solar 2nd + Battery 3rd. Hybrid Energy & UPS mode Programmable battery Level. SbU Solar 1st + Battery 2nd /Level, Utility 3rd. CSO Solar 1st, Utility 2nd. Cut Utility 1st, Solar 2nd. SNU Solar + Utility together. Approximate battery Back-up Time (minutes). Load 500-VA (400W) with 100Ah Battery. Load 1000-VA (800W) with 100Ah Battery. Load 2000-VA (1600W) with 100Ah Battery. Load 3000-VA (2400W) with 100Ah Battery. Load 500-VA (400W) with 200Ah Battery. Load 1000-VA (800W) with 200Ah Battery. Load 2000-VA (1600W) with 200Ah Battery. Load 3000-VA (2400W) with 200Ah Battery. Load 500-VA (400W) with 400Ah Battery. Load 1000-VA (800W) with 400Ah Battery. Load 2000-VA (1600W) with 400Ah Battery. Load 3000-VA (2400W) with 400Ah Battery. The item “Shps 15 Jun. Hybrid PIP LV2424 2400W 24V 120V/240V Inverter Split Phase(2 needed)” is in sale since Monday, May 18, 2020. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “usa-mpp-solar” and is located in Mount Pleasant, Utah. This item can be shipped worldwide.

Brand: MPP SOLAR
Model: Hybrid LV 2424
Inverter Technology: Hybrid
System Configuration: Grid-Tie
Voltage Output: 120V / 240Vac
Country/Region of Manufacture: Taiwan
Protection Properties: Anti-Island Protection
Wattage: 2400
Recommended Environment: Indoor
MPN: Hybrid LV 2424
UPC: Does not apply
Color: Green
Features: LCD Display

Category: shps | Comments Off

March 29

LV2424 Hybrid 2 x 2400W 24V 120V Solar Inverter Split Phase, incl parallel kit

USA Stock is import duty free! Now supports Wifi remote monitoring on the www. Manuals can be found here. This is a listing for TWO Hybrid LV2424 3kVA 2400W 110/120V inverters , 80A MPPT solar charger, and built in 60A Utility charger to keep your batteries charged if the Sun is inadequate, or your batteries are just running low in the middle of the night. Runs on a 24VDC Battery bank. LiFePO4 + Lithium Ion support. Supports grid tie and off grid functionality not UL Listed. 1 2400 W + 2400W Pure Sine wave output expandable up to 9 units (21.6 kW). 2 2kW + 2kW MPPT Solar Charge controller. 3 60 A + 60 A Utility Battery Charger (In case your battery level falls below your set point). 4 UPS function, wire it to the Utility power, if battery power is too low, the system automatically switches the load to Utility power. 5 Single 120V 60Hz , Split phase (120V – 0 – 120V) and 3 phase capable (requires parrallel board for each unit – Included). 5.5 Grid Tie function (Anti Islanding, – Note: This inverter is NOT UL listed in the USA, for DIY enthusiast only, it is CE listed for European markets) – Send your excess power to slow your existing meter, once batteries are fully charged. This is our split phase listing. This unit includes the two parallel modules. This unit will operate just fine on its own for single phase 110V/120V, and is upgradable / stackable for future single / split phase or three phase operation. An excellent start to grow your installation, or if you just simply need one more inverter to add to your existing array. Stackable up to 9 units in any configuration up to 2.4kW x 9 = 21.6kW. The item “LV2424 Hybrid 2 x 2400W 24V 120V Solar Inverter Split Phase, incl parallel kit” is in sale since Tuesday, March 24, 2020. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “usa-mpp-solar” and is located in Mount Pleasant, Utah. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Panama, Jamaica, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.

Model: 2 pcs Hybrid LV2424 with parallel kits
Country/Region of Manufacture: Taiwan
Wattage: 4800W
System Configuration: Grid-Tie
UPC: Does not apply
Power Source: Solar
Color: Green
MPN: Hybrid LV 2424
Recommended Environment: Indoor
Protection Properties: Anti-Island Protection
Voltage Output: 120V / 240Vac
Brand: MPP SOLAR

Category: lv2424 | Comments Off

March 27

Ships today. Hybrid PIP LV2424 2400W 24V 120V/240V Inverter Split Phase capable

NOTE:: The Virus is causing supply chain havoc in almost every industry. And we are not an exception. NOTE : TWO INVERTERS are required for split phase operation, as well as a parallel kit for each inverter. (One inverter per phase). USA Stock is import duty free! Now supports Wifi remote monitoring on the www. Manuals can be found here. This is a listing for ONE Hybrid LV2424 3kVA 2400W 110/120V inverter , 80A MPPT solar charger, and built in 60A Utility charger to keep your batteries charged if the Sun is inadequate, or your batteries are just running low in the middle of the night. Runs on a 24VDC Battery bank. LiFePO4 + Lithium Ion support. Supports grid tie and off grid functionality not UL Listed. 1 2400 W Pure Sine wave output expandable up to 9 units (21.6 kW). 2 2kW MPPT Solar Charge controller. 3 60 A Utility Battery Charger In case your battery level falls below your setpoint. 4 UPS function, wire it to the Utility power, if battery power is too low, the system automatically switches the load to Utility power. 5 Single 120V 60Hz , Split phase (120V – 0 – 120V) and 3 phase capable (requires parralel board for each unit). 5.5 Grid Tie function (Anti Islanding, – Note: This inverter is NOT UL listed in the USA, for DIY enthusiast only, it is CE listed for European markets) – Send your excess power to slow your existing meter, once batteries are fully charged. If you need two units for split phase operation, see our split phase listing. This unit excludes the parallel module, whereas the other bundled listings includes it. This unit will operate just fine on its own for single phase 110V/120V, and is upgradable / stackable for future single / split phase or three phase operation. An excellent start to grow your installation, or if you just simply need one more inverter to add to your existing array. Stackable up to 9 units in any configuration up to 2.4kW x 9 = 21.6kW. 120V USA Models Comparison Sheet. After 1 year, offer spare part modules at reasonable pricing. Output Power in Watts (Pure Sine wave). Output Power in VA. Output Surge Capacity for 5 seconds. Output Voltage AC – Single Inverter Configuration. Output Voltage AC – Multiple Inverter Configuration. Single, 2 and 3 Phase. 1, Split 120/240V, 2 & 3 Ph. 1, Split, 2 & 3 Ph. Supports 50 and 60 Hz. Parallelable Daisy chain multiple units. Yes, 6 units-14.4kW max. Yes, 9 Units21.6 kW max. Yes- 3 Units 15kW max. Split Phase support (L1-120V , N, L2-120V) 240V / L1 & L2, 180 Deg. Yes, 2 or more units. Yes In Same unit. Two Phase Output 120V and 208V 120 Deg. Yes, 1 or more units. Three Phase Output 120V and 208V 120 Deg. Yes, 3 or more units. Optional Grid Feedback excess energy (Anti Islanding). Generator Dry Contact Relay Start / Stop / Alarm / User Def. MPPT Solar Input Voltage Range. MPPT Solar Input Max Voc(open circuit volts). MPPT Max Watts Solar Input. 8kW (4000W x 2). MPPT Max battery Charging Current. 160A (80A x 2). Min Battery Voltage for Solar Charging. Utility Max Charging Current. Utility + Solar max Current. Utility Bypass Max Current (Utility switched to Load). Communication Port, USB, RS232. Software Support (MAC, Windows 7-10, Linux). Wifi Communication Module compatible. Operating Temp F / C. Operating Humidity (Non Condensing). Net Weight lb / Kg. Dimensions in / cm. 3 Step Charging Algorithm (Bulk / Absorb/ Float). Lithium & LiFePO4 support (USER Mode). USER definable battery parameters. Absolute Min Cutoff Voltage. Min Cold Start Voltage. Max Charging Amps Solar + Utility. Absolute Minimum Batt Ah capacity. Recommended Min Batt Ah capacity. Energy Saving (Utility provides power as last priority). SOL – Solar 1st + Battery Assist 2nd , Utility Assist 3rd. UPS Mode (Solar and Battery only if no Utility). Utl – Utility 1st, Solar 2nd + Battery 3rd. Hybrid Energy & UPS mode Programmable battery Level. SbU Solar 1st + Battery 2nd /Level, Utility 3rd. CSO Solar 1st, Utility 2nd. Cut Utility 1st, Solar 2nd. SNU Solar + Utility together. Approximate battery Back-up Time (minutes). Load 500-VA (400W) with 100Ah Battery. Load 1000-VA (800W) with 100Ah Battery. Load 2000-VA (1600W) with 100Ah Battery. Load 3000-VA (2400W) with 100Ah Battery. Load 500-VA (400W) with 200Ah Battery. Load 1000-VA (800W) with 200Ah Battery. Load 2000-VA (1600W) with 200Ah Battery. Load 3000-VA (2400W) with 200Ah Battery. Load 500-VA (400W) with 400Ah Battery. Load 1000-VA (800W) with 400Ah Battery. Load 2000-VA (1600W) with 400Ah Battery. Load 3000-VA (2400W) with 400Ah Battery. The item “Ships today. Hybrid PIP LV2424 2400W 24V 120V/240V Inverter Split Phase capable” is in sale since Tuesday, March 24, 2020. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “usa-mpp-solar” and is located in Mount Pleasant, Utah. This item can be shipped worldwide.

Inverter Technology: Hybrid
Model: Hybrid LV 2424
Country/Region of Manufacture: Taiwan
Wattage: 2400
System Configuration: Grid-Tie
UPC: Does not apply
Features: LCD Display
Color: Green
MPN: Hybrid LV 2424
Recommended Environment: Indoor
Protection Properties: Anti-Island Protection
Voltage Output: 120V / 240Vac
Brand: MPP SOLAR

Category: ships | Comments Off

March 5

LV2424 Hybrid 2 x 2400W 24V 120V Solar Inverter Split Phase, incl parrallel kit

USA Stock is import duty free! Now supports Wifi remote monitoring on the www. Manuals can be found here. This is a listing for TWO Hybrid LV2424 3kVA 2400W 110/120V inverters , 80A MPPT solar charger, and built in 60A Utility charger to keep your batteries charged if the Sun is inadequate, or your batteries are just running low in the middle of the night. Runs on a 24VDC Battery bank. LiFePO4 + Lithium Ion support. Supports grid tie and off grid functionality not UL Listed. 1 2400 W + 2400W Pure Sine wave output expandable up to 9 units (21.6 kW). 2 2kW + 2kW MPPT Solar Charge controller. 3 60 A + 60 A Utility Battery Charger (In case your battery level falls below your set point). 4 UPS function, wire it to the Utility power, if battery power is too low, the system automatically switches the load to Utility power. 5 Single 120V 60Hz , Split phase (120V – 0 – 120V) and 3 phase capable (requires parrallel board for each unit – Included). 5.5 Grid Tie function (Anti Islanding, – Note: This inverter is NOT UL listed in the USA, for DIY enthusiast only, it is CE listed for European markets) – Send your excess power to slow your existing meter, once batteries are fully charged. This is our split phase listing. This unit includes the two parallel modules. This unit will operate just fine on its own for single phase 110V/120V, and is upgradable / stackable for future single / split phase or three phase operation. An excellent start to grow your installation, or if you just simply need one more inverter to add to your existing array. Stackable up to 9 units in any configuration up to 2.4kW x 9 = 21.6kW. The item “LV2424 Hybrid 2 x 2400W 24V 120V Solar Inverter Split Phase, incl parrallel kit” is in sale since Tuesday, February 25, 2020. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “usa-mpp-solar” and is located in Mount Pleasant, Utah. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Panama, Jamaica, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.

Brand: MPP SOLAR
Model: 2 pcs Hybrid LV2424 with parallel kits
System Configuration: Grid-Tie
Voltage Output: 120V / 240Vac
Country/Region of Manufacture: Taiwan
Protection Properties: Anti-Island Protection
Wattage: 4800W
Power Source: Solar
Recommended Environment: Indoor
MPN: Hybrid LV 2424
Color: Green
UPC: Does not apply

Category: lv2424 | Comments Off

February 18

Read below! Hybrid PIP LV2424 2400W 25V 120V/240V Inverter Split Phase capable

NOTE:: The Corona Virus is causing supply chain havoc in almost every industry. And we are not an exception. We are warned of unknown supply thereafter. USA Stock is import duty free! Now supports Wifi remote monitoring on the www. Manuals can be found here. This is a listing for ONE Hybrid LV2424 3kVA 2400W 110/120V inverter , 80A MPPT solar charger, and built in 60A Utility charger to keep your batteries charged if the Sun is inadequate, or your batteries are just running low in the middle of the night. Runs on a 24VDC Battery bank. LiFePO4 + Lithium Ion support. Supports grid tie and off grid functionality not UL Listed. 1 2400 W Pure Sine wave output expandable up to 9 units (21.6 kW). 2 2kW MPPT Solar Charge controller. 3 60 A Utility Battery Charger In case your battery level falls below your setpoint. 4 UPS function, wire it to the Utility power, if battery power is too low, the system automatically switches the load to Utility power. 5 Single 120V 60Hz , Split phase (120V – 0 – 120V) and 3 phase capable (requires parralel board for each unit). 5.5 Grid Tie function (Anti Islanding, – Note: This inverter is NOT UL listed in the USA, for DIY enthusiast only, it is CE listed for European markets) – Send your excess power to slow your existing meter, once batteries are fully charged. If you need two units for split phase operation, see our split phase listing. This unit excludes the parallel module, whereas the other bundled listings includes it. This unit will operate just fine on its own for single phase 110V/120V, and is upgradable / stackable for future single / split phase or three phase operation. An excellent start to grow your installation, or if you just simply need one more inverter to add to your existing array. Stackable up to 9 units in any configuration up to 2.4kW x 9 = 21.6kW. 120V USA Models Comparison Sheet. After 1 year, offer spare part modules at reasonable pricing. Output Power in Watts (Pure Sine wave). Output Power in VA. Output Surge Capacity for 5 seconds. Output Voltage AC – Single Inverter Configuration. Output Voltage AC – Multiple Inverter Configuration. Single, 2 and 3 Phase. 1, Split 120/240V, 2 & 3 Ph. 1, Split, 2 & 3 Ph. Supports 50 and 60 Hz. Parallelable Daisy chain multiple units. Yes, 6 units-14.4kW max. Yes, 9 Units21.6 kW max. Yes- 3 Units 15kW max. Split Phase support (L1-120V , N, L2-120V) 240V / L1 & L2, 180 Deg. Yes, 2 or more units. Yes In Same unit. Two Phase Output 120V and 208V 120 Deg. Yes, 1 or more units. Three Phase Output 120V and 208V 120 Deg. Yes, 3 or more units. Optional Grid Feedback excess energy (Anti Islanding). Generator Dry Contact Relay Start / Stop / Alarm / User Def. MPPT Solar Input Voltage Range. MPPT Solar Input Max Voc(open circuit volts). MPPT Max Watts Solar Input. 8kW (4000W x 2). MPPT Max battery Charging Current. 160A (80A x 2). Min Battery Voltage for Solar Charging. Utility Max Charging Current. Utility + Solar max Current. Utility Bypass Max Current (Utility switched to Load). Communication Port, USB, RS232. Software Support (MAC, Windows 7-10, Linux). Wifi Communication Module compatible. Operating Temp F / C. Operating Humidity (Non Condensing). Net Weight lb / Kg. Dimensions in / cm. 3 Step Charging Algorithm (Bulk / Absorb/ Float). Lithium & LiFePO4 support (USER Mode). USER definable battery parameters. Absolute Min Cutoff Voltage. Min Cold Start Voltage. Max Charging Amps Solar + Utility. Absolute Minimum Batt Ah capacity. Recommended Min Batt Ah capacity. Energy Saving (Utility provides power as last priority). SOL – Solar 1st + Battery Assist 2nd , Utility Assist 3rd. UPS Mode (Solar and Battery only if no Utility). Utl – Utility 1st, Solar 2nd + Battery 3rd. Hybrid Energy & UPS mode Programmable battery Level. SbU Solar 1st + Battery 2nd /Level, Utility 3rd. CSO Solar 1st, Utility 2nd. Cut Utility 1st, Solar 2nd. SNU Solar + Utility together. Approximate battery Back-up Time (minutes). Load 500-VA (400W) with 100Ah Battery. Load 1000-VA (800W) with 100Ah Battery. Load 2000-VA (1600W) with 100Ah Battery. Load 3000-VA (2400W) with 100Ah Battery. Load 500-VA (400W) with 200Ah Battery. Load 1000-VA (800W) with 200Ah Battery. Load 2000-VA (1600W) with 200Ah Battery. Load 3000-VA (2400W) with 200Ah Battery. Load 500-VA (400W) with 400Ah Battery. Load 1000-VA (800W) with 400Ah Battery. Load 2000-VA (1600W) with 400Ah Battery. Load 3000-VA (2400W) with 400Ah Battery. The item “Read below! Hybrid PIP LV2424 2400W 25V 120V/240V Inverter Split Phase capable” is in sale since Monday, February 17, 2020. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “usa-mpp-solar” and is located in Mount Pleasant, Utah. This item can be shipped worldwide.

Inverter Technology: Hybrid
Model: Hybrid LV 2424
Country/Region of Manufacture: Taiwan
Wattage: 2400
System Configuration: Grid-Tie
UPC: Does not apply
Features: LCD Display
Color: Green
MPN: Hybrid LV 2424
Recommended Environment: Indoor
Protection Properties: Anti-Island Protection
Voltage Output: 120V / 240Vac
Brand: MPP SOLAR

Category: read | Comments Off

February 17

2020 Special! Hybrid PIP LV2424 2400W 25V 120V/240V Inverter Split Phase capble

USA Stock is import duty free! Now supports Wifi remote monitoring on the www. Manuals can be found here. This is a listing for ONE Hybrid LV2424 3kVA 2400W 110/120V inverter , 80A MPPT solar charger, and built in 60A Utility charger to keep your batteries charged if the Sun is inadequate, or your batteries are just running low in the middle of the night. Runs on a 24VDC Battery bank. LiFePO4 + Lithium Ion support. Supports grid tie and off grid functionality not UL Listed. 1 2400 W Pure Sine wave output expandable up to 9 units (21.6 kW). 2 2kW MPPT Solar Charge controller. 3 60 A Utility Battery Charger In case your battery level falls below your setpoint. 4 UPS function, wire it to the Utility power, if battery power is too low, the system automatically switches the load to Utility power. 5 Single 120V 60Hz , Split phase (120V – 0 – 120V) and 3 phase capable (requires parralel board for each unit). 5.5 Grid Tie function (Anti Islanding, – Note: This inverter is NOT UL listed in the USA, for DIY enthusiast only, it is CE listed for European markets) – Send your excess power to slow your existing meter, once batteries are fully charged. If you need two units for split phase operation, see our split phase listing. This unit excludes the parallel module, whereas the other bundled listings includes it. This unit will operate just fine on its own for single phase 110V/120V, and is upgradable / stackable for future single / split phase or three phase operation. An excellent start to grow your installation, or if you just simply need one more inverter to add to your existing array. Stackable up to 9 units in any configuration up to 2.4kW x 9 = 21.6kW. 120V USA Models Comparison Sheet. After 1 year, offer spare part modules at reasonable pricing. Output Power in Watts (Pure Sine wave). Output Power in VA. Output Surge Capacity for 5 seconds. Output Voltage AC – Single Inverter Configuration. Output Voltage AC – Multiple Inverter Configuration. Single, 2 and 3 Phase. 1, Split 120/240V, 2 & 3 Ph. 1, Split, 2 & 3 Ph. Supports 50 and 60 Hz. Parallelable Daisy chain multiple units. Yes, 6 units-14.4kW max. Yes, 9 Units21.6 kW max. Yes- 3 Units 15kW max. Split Phase support (L1-120V , N, L2-120V) 240V / L1 & L2, 180 Deg. Yes, 2 or more units. Yes In Same unit. Two Phase Output 120V and 208V 120 Deg. Yes, 1 or more units. Three Phase Output 120V and 208V 120 Deg. Yes, 3 or more units. Optional Grid Feedback excess energy (Anti Islanding). Generator Dry Contact Relay Start / Stop / Alarm / User Def. MPPT Solar Input Voltage Range. MPPT Solar Input Max Voc(open circuit volts). MPPT Max Watts Solar Input. 8kW (4000W x 2). MPPT Max battery Charging Current. 160A (80A x 2). Min Battery Voltage for Solar Charging. Utility Max Charging Current. Utility + Solar max Current. Utility Bypass Max Current (Utility switched to Load). Communication Port, USB, RS232. Software Support (MAC, Windows 7-10, Linux). Wifi Communication Module compatible. Operating Temp F / C. Operating Humidity (Non Condensing). Net Weight lb / Kg. Dimensions in / cm. 3 Step Charging Algorithm (Bulk / Absorb/ Float). Lithium & LiFePO4 support (USER Mode). USER definable battery parameters. Absolute Min Cutoff Voltage. Min Cold Start Voltage. Max Charging Amps Solar + Utility. Absolute Minimum Batt Ah capacity. Recommended Min Batt Ah capacity. Energy Saving (Utility provides power as last priority). SOL – Solar 1st + Battery Assist 2nd , Utility Assist 3rd. UPS Mode (Solar and Battery only if no Utility). Utl – Utility 1st, Solar 2nd + Battery 3rd. Hybrid Energy & UPS mode Programmable battery Level. SbU Solar 1st + Battery 2nd /Level, Utility 3rd. CSO Solar 1st, Utility 2nd. Cut Utility 1st, Solar 2nd. SNU Solar + Utility together. Approximate battery Back-up Time (minutes). Load 500-VA (400W) with 100Ah Battery. Load 1000-VA (800W) with 100Ah Battery. Load 2000-VA (1600W) with 100Ah Battery. Load 3000-VA (2400W) with 100Ah Battery. Load 500-VA (400W) with 200Ah Battery. Load 1000-VA (800W) with 200Ah Battery. Load 2000-VA (1600W) with 200Ah Battery. Load 3000-VA (2400W) with 200Ah Battery. Load 500-VA (400W) with 400Ah Battery. Load 1000-VA (800W) with 400Ah Battery. Load 2000-VA (1600W) with 400Ah Battery. Load 3000-VA (2400W) with 400Ah Battery. The item “2020 Special! Hybrid PIP LV2424 2400W 25V 120V/240V Inverter Split Phase capble” is in sale since Sunday, February 16, 2020. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “usa-mpp-solar” and is located in Mount Pleasant, Utah. This item can be shipped worldwide.

Brand: MPP SOLAR
Model: Hybrid LV 2424
Inverter Technology: Hybrid
System Configuration: Grid-Tie
Voltage Output: 120V / 240Vac
Country/Region of Manufacture: Taiwan
Protection Properties: Anti-Island Protection
Wattage: 2400
MPN: Hybrid LV 2424
Recommended Environment: Indoor
UPC: Does not apply
Features: LCD Display
Color: Green

Category: special | Comments Off

January 12

2020 Special! Hybrid PIP LV2424 2400W 25V 120V/240V Inverter Split Phase capble

USA Stock is import duty free! Now supports Wifi remote monitoring on the www. Manuals can be found here. This is a listing for ONE Hybrid LV2424 3kVA 2400W 110/120V inverter , 80A MPPT solar charger, and built in 60A Utility charger to keep your batteries charged if the Sun is inadequate, or your batteries are just running low in the middle of the night. Runs on a 24VDC Battery bank. LiFePO4 + Lithium Ion support. Supports grid tie and off grid functionality not UL Listed. 1 2400 W Pure Sine wave output expandable up to 9 units (21.6 kW). 2 2kW MPPT Solar Charge controller. 3 60 A Utility Battery Charger In case your battery level falls below your setpoint. 4 UPS function, wire it to the Utility power, if battery power is too low, the system automatically switches the load to Utility power. 5 Single 120V 60Hz , Split phase (120V – 0 – 120V) and 3 phase capable (requires parralel board for each unit). 5.5 Grid Tie function (Anti Islanding, – Note: This inverter is NOT UL listed in the USA, for DIY enthusiast only, it is CE listed for European markets) – Send your excess power to slow your existing meter, once batteries are fully charged. If you need two units for split phase operation, see our split phase listing. This unit excludes the parallel module, whereas the other bundled listings includes it. This unit will operate just fine on its own for single phase 110V/120V, and is upgradable / stackable for future single / split phase or three phase operation. An excellent start to grow your installation, or if you just simply need one more inverter to add to your existing array. Stackable up to 9 units in any configuration up to 2.4kW x 9 = 21.6kW. 120V USA Models Comparison Sheet. After 1 year, offer spare part modules at reasonable pricing. Output Power in Watts (Pure Sine wave). Output Power in VA. Output Surge Capacity for 5 seconds. Output Voltage AC – Single Inverter Configuration. Output Voltage AC – Multiple Inverter Configuration. Single, 2 and 3 Phase. 1, Split 120/240V, 2 & 3 Ph. 1, Split, 2 & 3 Ph. Supports 50 and 60 Hz. Parallelable Daisy chain multiple units. Yes, 6 units-14.4kW max. Yes, 9 Units21.6 kW max. Yes- 3 Units 15kW max. Split Phase support (L1-120V , N, L2-120V) 240V / L1 & L2, 180 Deg. Yes, 2 or more units. Yes In Same unit. Two Phase Output 120V and 208V 120 Deg. Yes, 1 or more units. Three Phase Output 120V and 208V 120 Deg. Yes, 3 or more units. Optional Grid Feedback excess energy (Anti Islanding). Generator Dry Contact Relay Start / Stop / Alarm / User Def. MPPT Solar Input Voltage Range. MPPT Solar Input Max Voc(open circuit volts). MPPT Max Watts Solar Input. 8kW (4000W x 2). MPPT Max battery Charging Current. 160A (80A x 2). Min Battery Voltage for Solar Charging. Utility Max Charging Current. Utility + Solar max Current. Utility Bypass Max Current (Utility switched to Load). Communication Port, USB, RS232. Software Support (MAC, Windows 7-10, Linux). Wifi Communication Module compatible. Operating Temp F / C. Operating Humidity (Non Condensing). Net Weight lb / Kg. Dimensions in / cm. 3 Step Charging Algorithm (Bulk / Absorb/ Float). Lithium & LiFePO4 support (USER Mode). USER definable battery parameters. Absolute Min Cutoff Voltage. Min Cold Start Voltage. Max Charging Amps Solar + Utility. Absolute Minimum Batt Ah capacity. Recommended Min Batt Ah capacity. Energy Saving (Utility provides power as last priority). SOL – Solar 1st + Battery Assist 2nd , Utility Assist 3rd. UPS Mode (Solar and Battery only if no Utility). Utl – Utility 1st, Solar 2nd + Battery 3rd. Hybrid Energy & UPS mode Programmable battery Level. SbU Solar 1st + Battery 2nd /Level, Utility 3rd. CSO Solar 1st, Utility 2nd. Cut Utility 1st, Solar 2nd. SNU Solar + Utility together. Approximate battery Back-up Time (minutes). Load 500-VA (400W) with 100Ah Battery. Load 1000-VA (800W) with 100Ah Battery. Load 2000-VA (1600W) with 100Ah Battery. Load 3000-VA (2400W) with 100Ah Battery. Load 500-VA (400W) with 200Ah Battery. Load 1000-VA (800W) with 200Ah Battery. Load 2000-VA (1600W) with 200Ah Battery. Load 3000-VA (2400W) with 200Ah Battery. Load 500-VA (400W) with 400Ah Battery. Load 1000-VA (800W) with 400Ah Battery. Load 2000-VA (1600W) with 400Ah Battery. Load 3000-VA (2400W) with 400Ah Battery. The item “2020 Special! Hybrid PIP LV2424 2400W 25V 120V/240V Inverter Split Phase capble” is in sale since Friday, January 10, 2020. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “usa-mpp-solar” and is located in Mount Pleasant, Utah. This item can be shipped worldwide.

Brand: MPP SOLAR
Model: Hybrid LV 2424
Inverter Technology: Hybrid
Voltage Output: 120V / 240Vac
Country/Region of Manufacture: Taiwan
Protection Properties: Anti-Island Protection
Recommended Environment: Indoor
Features: LCD Display
Color: Green
System Configuration: Grid-Tie
Wattage: 2400
MPN: Hybrid LV 2424
UPC: Does not apply

Category: special | Comments Off

April 2024
M	T	W	T	F	S	S
« Mar
1	2	3	4	5	6	7
8	9	10	11	12	13	14
15	16	17	18	19	20	21
22	23	24	25	26	27	28
29	30