1500With2000W 45-90V DC/AC wind grid tie inverter with dump load resistor

1500W/2000W grid tie inverter for DC or AC wind turbine generators, 45-90V Input, 230V 120V AC(for 2000W, there is only 230V version). Pure sine wave MPPT. Dump load resistor included. For DC(WDL)/AC(WAL) Output Wind Turbine. Build In Dump Load Controller. Build In High Wind Protection. The grid-tie inverter can transfer wind energy from wind generators directly into the home grid using no extra equipment. It can be connected to any outlet (conventional network) in the home. The grid-tie inverter controls the phase and the. Frequency and voltage of the power generated by the wind generator. It produces a pure sine-wave and matches that of. This WDL grid tie inverter has designed for wind turbines that put out DC voltage WAL grid tie inverter was designed for. The wind turbine with 3 phase ac output0. It can maintain the rotating speed of the wind turbine and keep the voltage from. The wind turbine always at the range of the rated range of the grid tie inverter. It also has a high voltage protection function. When the wind is too big, and the dump load controlling system cant keep the output voltage from the wind turbine, the. Controller will disconnect itself from the wind turbine, so it is very safe to be used. Normal AC Output Power. Maximum AC Output Power. AC Output Frequency Range. Total Harmonic Distortion(THD). AC Input Voltage Range(3 phases). AC Output Voltage Range. Not available for now. DC Input Voltage Range. AC Input Voltage Range. On the LCD Panel of the inverter, there is one AC output socket, that will connect the AC output cable to home grid. The LCD display will display the grid AC voltage, current , active power and electric energy that combined to the grid. Electric parameters measurement function (voltage, current and active power, electric energy). Running time function (record load cumulative working hours). Power down data save function (save the number of kWh, operation time). Large screen LCD display (display voltage, current, power, active power, cumulative running time). UP: Short press will display power, electricity, current and voltage in anti-sequence. DOWN: Short press will display power, electricity, current and voltage in sequence. BACK LIGHT: Short press will open or close backlight. Have given more than 3 negative or netural feedbacks during past 60days. Have received 3 or more negativeor netural feedback during past 60days. Have opened dispute twice in past 60days. We believe that all problems could be. Fixed by communication between buyers and sellers as long as both of us are honest and understanding. The item “1500With2000W 45-90V DC/AC wind grid tie inverter with dump load resistor” is in sale since Saturday, November 26, 2016. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “sunhome910″ and is located in , . This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.

Brand: Ecopower
MPN: Does Not Apply
Country/Region of Manufacture: China

Category: 1500with2000w | Comments Off

February 26

2000W Wind Power Grid Tie Inverter with Limiter / Dump Load Controller Resistor

For new energy products , we are more professional. NEW 2000W Wind Power Grid Tie Inverter. With dump load controller and resistor. -Max Efficiency:>92% MPPT Efficiency:99%. -AC 220V 230V 240V 50hz 60hz Automatic. Low cost and easy installation. Directly connect to three phase wind turbine. Much better output waveform compare with similiar GTI. Improving the efficiency of the entire solar power system. Overload protection , Anti-island protection. Short-circuit protection/Reverse polarity protection. AC output voltage and current THD<5%, PF>99%. Build in dump load function. Build in Limiter (internal type). Introduction of Sunshine Grid Tie Inverter for Wind Turbine. The Wind Grid Tie Power Inverter is the worlds most technologically advanced inverter for use in utility-interactive applications. This manual details the safe installation and operation of the The Wind Grid Tie Inverter. This integrated system maximizes energy harvest, increases system reliability, and implifies design, installation and management. The small type wind grid tie power inverter can obtain the wind energy from wind turbine, and can tie to the grid through its output cables with no extra equipment. The installation is very convenient and reliable. We call the system combining with small grid tie inverter and wind turbine as SGWT. The system includes wind turbine and small grid tie inverter and installation kit, and some SGWT also will include controller, dump load resistor. The inverter can be connected to any outlets of utility grid at house. The small grid tie inverter monitors the volume, frequency and phase of the home utility grid, then produce pure sine wave AC power that the frequency and phase are as same as the grid’s, and the volume is a bit higher than the grid’s, then according to the current controlled PWM, to control the output. Power to the grid. The small grid tie inverter just puts out power when the home grid is on. When the wind turbine is rotating, and the output of the voltage is in the range of the rated input voltage of the inverter, the wind turbine will produces power, and the grid tie inverter will change the power from wind turbine to the home grid. When the total power of electric apparatus that are using in the house is larger than the output power of the inverters, these. Power from the inverters will be consumed in the house, this will slow down the power meter, otherwise, the difference of the output power of the inverter between the total used power of the apparatus will go out from the house to the out grid. Input Voltage Range 45-90vdc (test point is at the output of the inside rectifier) , Peak power tracking voltage: 50-90v , Max output power:2000w , Nominal Voltage Range: 185-265v , Max Efficiency:>92% , MPPT Efficiency:99%. If DC input type invert. Er , there is only two input connection terminato. Input AC/DC Voltage Range. AC Output Voltage Range. Dimensions (W x H x D). Note: this is 2000w wind power grid tie inverter with limiter. Wind power grid tie inverter —- 1pcs , 2. Dump load resistor —1pcs , 3. AC cable –1pcs , 4. Limiter sensor/clamp / cable —- 1 set. Wind Grid Tie Inverter Installation. Considering the total capacity of the grid tie power system that you need. The total capacity of the whole grid tie power system is according to your power consumption in the site that you want to install, or how much power that you want it to feed to the utility grid. Actually, the volume is just according to your willingness, because when the total power of electric appliances that are being used in the installation site is larger than the output power of the grid tie power system, these power from the system will be consumed in the site, this will slow down the power meter, otherwise, the difference of the output power from the system between the total used power of the appliances will feed to the utility grid. For example, if you want to install a grid tie power system in your house, you could decide the total power volume according to the total power the appliances that you use in your house, maybe the consumption of total energy in per day is about 5KWH, then you should realize the averaged speed of the wind in per day at your site, check the power to the speed of the wind curve from the specifications of the wind turbine, then you can estimate the average power that the wind turbine can generate, actually the real average power the wind turbine can generate at your side is not easy to estimate, you need to check the history data of the climate, because it will vary every day according to the climate, just assume a 1KW rated wind turbine is suitable for the grid tie power system that you plan to set, with this capacity of the system, it can supply all power consumption in whole year. When grid tie power system is working, sometimes, there is extra power feed to utility grid if the power from the grid tie system is larger than the power consumed by the appliances in your house, and sometimes will not when it is not larger. If you use a 1KW wind turbine, then we call the GTWT system is 1KW grid tie power system, of course, you can install 500W grid tie power system or 2KW grid tie inverter, even more large capacity or more small capacity grid tie inverter, it doesnt matter. The capacity is too big, you should consider the volume of AC system of your house can hold the feeded power. Choosing applicable wind turbine for Sunshine Grid Tie Inverter. The most kinds of specifications that the factories marked about the wind turbines. 1, Starting wind speed(m/s). 2, Cut-in wind speed(m/s). 3, Rated wind speed(m/s). 6, Safe wind speed(m/s). 7, Rated DC voltage. You need to choose a wind turbine that the rated power can meet the power consumption. When you choose a wind turbine, you also need to consider ahead what. Model gird tie inverter of SUN series you want to use. Wind turbines have two output type. One is AC output type, and another is DC output type, if the wind turbine is DC output type. It must be integrated with a rectifier. So if the wind turbine is AC output type, you should. Use WAL model of SUN series grid tie inverter, if the wind turbine is DC output type, then. You should use WDL model of SUN series grid tie inverter. Selecting accessory for installation of the Grid Tie Power System. The accessory for grid tie power system including. 1, Connecting cables will be connected with wind turbine and inverters. 4, Power meter(Optional). 5, Bracket for wind turbine installation(not included in this user manual). Selecting correct model of Sunshine Grid Tie Inverter. When finished step1 to step3, then you can select a correct model of SUN series inverter. If the wind turbine is DC output type, then you should choose WDL model inverters, and. The input DC voltage range of the inverter should fit the DC output voltage of the wind. Turbine, the rated power of the inverter should also fit the max. Power of the wind turbine. And the AC output of the inverter should fit the standard of AC utility grid. If the wind turbine is AC output type, then you should choose WAL model inverters. Factories dont supply the AC rated voltage, just supply DC rated voltage, so our WAL also. Supply the DC input range, please check the DC rated voltage of wind turbine should fit. The DC input range of the grid tie inverter. Installing wind turbine to suitable place. Installing the wind turbine of the SGWT to suitable location where the wind is strong enough. To drive the wind turbine. Warning: Please read the user manual of wind turbine before you install the wind. Turbine, dont install the wind turbine under high wind. Warning: Ensure using strong braket to fix the wind turbine to avoid the danger under. Warning: The blades of the wind turbine should be taken down before the hurricane is. Installing Sunshine Grid Tie Inverter to suitable place. Place the Grid Tie Inverter on a surface protected from direct sunlight, high. The inverter requires at least 150mm of clearance around itself for. The inverters are for indoor use, cant use at outdoor. You can use screws to fix. The inverter to the surface, because some models of Sunshine grid tie inverter have fans on. The bottom cover, so the surface should be flat. Connecting Sunshine Grid Tie Power System with cables and connectors. Connecting the Grid Tie Power System with Cables and Connectors. After finished from Step1 to Step6, you should connect the wind turbine and inverter with cables. And connectors to integrate the Sunshine Grid Tie System. Connect the ground terminal of the wind turbine to the NEC approved AC grounding electrode. Connect the grid tie inverters to the grounded racking using a grounding washer approved for the. The ground wire of the AC cables is connnected to the housing of inverter when the AC. Cables is connected to the inverters, so when the AC plug is inserted to the socket of AC outlet of. Utility grid in the house, the ground pin of the socket must be connected to the Earth ground. Connecting the wind turbine output cables after complete from Step1 to Step8. Warning: Before connect the wind turbine output cables to grid tie inverter, you should stop. The the rotating of the wind turbine just in order to avoid the sparkle when connect the cables. WAL model of grid tie invereter connected with AC output type of wind turbine. Connecting two 1000G2-WAL with a max. Power is 2KW wind turbine. The Inverter display can show many information, The main interface of the display and the icons explainations are show above. The inverter also integrate with internal limiter and external limiter function which can prevent excess power from going to the public grid. Select the internal limiter mode, inverter will work under limiter mode, output power of the inverter will be determined by load power. Select the external limiter mode, inverter need a external limiter module working with it. For more details about the limiter function, pls contact supplier. This function only useful with limiter type inverter. Notes: Save the setting after you reconfigurate the working mode or backlight setting. Notes: Battery Discharge Current Mode And Battery Discharge Power Mode are not developed yet. This interface will show the real time grid waveform. The grid voltage and frequency also will show in this interface. The energy interface will show the power generation curve everyday. Today KWH and Total KWH are also show in this page. In this interface, the display shows real time power, PV input voltage, inside temperature, date and time. Clock And Date Setting. Set the clock and date in this page, save the setting before exit. AC Output Current Waveform and PF Test Of 2000W Model. Tested 2000W model at nearly full load, Output current waveform shows good pure sine wave in oscilloscope, PF value also shows in good result, 99.8% PF value. GAIA NEW ENERGY is your trusted partner for long term business. We arethe MANUFACUTER of the solar inverter. We are responsible forthe quality of the inverter. The inverter has 2 years guarantee. All return items must be in their original condition. Please do contact with us for return address, details and any other issues. It may not apply to countries with different tariff rules. Please leave us message if you have any question, we will reply in 24 hours, thank you! The item “2000W Wind Power Grid Tie Inverter with Limiter / Dump Load Controller Resistor” is in sale since Sunday, February 26, 2017. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “new-power2010″ and is located in ShangHai. This item can be shipped worldwide.

Brand: SUN
MPN: SUN-2000G2WAL-R
Country/Region of Manufacture: China
Power Type: 3 Phase Wind Turbine/Generator
Dump Load Controller: Built-in
Dump load resistor: Included
Display: LCD
Max. Power Output: 2000w
Input AC/DC Voltage Range: 45-90v
AC Output Voltage Range: 185-265VAC auto
Output Frequency: 46Hz~65Hz
Standby Power Consumption: <0.5W
Total Harmonic Distortion: <5%
Peak Inverter Efficiency: 92%
Power Factor: 0.99
Output Wave Form: Pure Sine Wave
MPPT Efficiency: 99%
Over Current Protection: Yes
Over Temperature Protection: Yes
Reverse Polarity Protection: Yes
Anti-Island Protection: Yes
Stackable: Yes
Weight ( Kg): 5.9kg
Dimensions (W x H x D): 469x196x88mm
Featurer Function: Limiter

Category: 2000w | Comments Off

November 1

2000W Wind Generator grid tie inverter Dump Load 45-90VDC 230VAC MPPT Pure Sine

2000W Wind Turbine Generator Grid Tie Inverter DC 45-90V to AC 230V. This 2000W micro grid tie inverter is designed specially for small wind energy system. This inverter can directly connect wind charger through inverter to home grid. This inverter has been built in dump load controller, it can maintain the rotating speed of the wind turbine and keep the voltage from the wind turbine always at the range of the rated range of the grid tie inverter. It also has a high voltage protection function, when the wind is too strong, and the dump load controlling system can not keep the output voltage from the wind turbine, the controller will disconnect itself from the wind turbine, so it is very safe to be used. Features MPPT (Maximum Power Point Tracking) allowing each Wind turbine to run at optimum output. Connect Wind Turbines DC supply cables to the DC input terminal of the inverter, be sure that the polarity is correct. Recommended DC input cable size for maximum output is 8AWG or cables that can handle more than 30A. Optimal length would be less than 8m , longer cables will experience higher voltage drop. The range of output power of wind generator is 20W2000W. Connect the supplied AC power cord to the inverter and plug it to a home wall socket. The 3 green LED indicators will start to cycle from left to right when the grid and DC supply is detected. This indicates the inverter is operating under normal condition. The rate of the cycling is according to how much power is being output from the solar panels or the wind turbine. The more big output power is, the more fast the rate is. If there is no AC grid detected, the red LED will be on, the inverter will not put out power, this is called Island Protection. 45V 90V DC NOT AC. No need return the original one for low-valued items. All return products should be in original package with all accessories included. We stand behind our products so you are always covered! Pleas message us if recipient address changes needed before we fulfill the order. Sorry, no local pickups available. The free listing tool. List your items fast and easy and manage your active items. The item “2000W Wind Generator grid tie inverter Dump Load 45-90VDC 230VAC MPPT Pure Sine” is in sale since Tuesday, January 06, 2015. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “chargerangel” and is located in San Jose, California. This item can be shipped to United States, to Canada.

MPN: Does Not Apply
Brand: Mass power

Category: 2000w | Comments Off

October 18

2000W LCD Wind Turbine Grid Tie Inverter Dump Load 45-90VDC To 230VAC MPPT New

2000W Wind Turbine Generator Grid Tie Inverter DC 45-90V to AC 230V. This 2000W micro grid tie inverter is designed specially for small wind energy system. This inverter can directly connect wind charger through inverter to home grid. This inverter has been built in dump load controller, it can maintain the rotating speed of the wind turbine and keep the voltage from the wind turbine always at the range of the rated range of the grid tie inverter. It also has a high voltage protection function, when the wind is too strong, and the dump load controlling system can not keep the output voltage from the wind turbine, the controller will disconnect itself from the wind turbine, so it is very safe to be used. Features MPPT (Maximum Power Point Tracking) allowing each Wind turbine to run at optimum output. On the LCD Panel of the inverter, there is one AC output socket, that will connect the AC output cable to home grid. The LCD display will display the grid AC voltage, current , active power and electric energy that combined to the grid. LCD display Function: 1. Electric parameters measurement function (voltage, current and active power, electric energy). Running time function (record load cumulative working hours). Power down data save function (save the number of kWh, operation time). Large screen LCD display (display voltage, current, power, active power, cumulative running time) Key Function. UP: Short press will display power, electricity, current and voltage in anti-sequence. DOWN: Short press will display power, electricity, current and voltage in sequence. BACK LIGHT: Short press will open or close backlight. Connect Wind Turbines DC supply cables to the DC input terminal of the inverter, be sure that the polarity is correct. Recommended DC input cable size for maximum output is 8AWG or cables that can handle more than 30A. Optimal length would be less than 8m , longer cables will experience higher voltage drop. The range of output power of wind generator is 20W2000W. Connect the supplied AC power cord to the inverter and plug it to a home wall socket. The 3 green LED indicators will start to cycle from left to right when the grid and DC supply is detected. This indicates the inverter is operating under normal condition. The rate of the cycling is according to how much power is being output from the solar panels or the wind turbine. The more big output power is, the more fast the rate is. If there is no AC grid detected, the red LED will be on, the inverter will not put out power, this is called Island Protection. 45V 90V DC NOT AC. No need return the original one for low-valued items. All return products should be in original package with all accessories included. We stand behind our products so you are always covered! Pleas message us if recipient address changes needed before we fulfill the order. Sorry, no local pickups available. The free listing tool. List your items fast and easy and manage your active items. The item “2000W LCD Wind Turbine Grid Tie Inverter Dump Load 45-90VDC To 230VAC MPPT New” is in sale since Thursday, October 08, 2015. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “chargerangel” and is located in San Jose, California. This item can be shipped to United States, to Canada.

MPN: Does Not Apply
Brand: Mass power

Category: 2000w | Comments Off

October 7

2000W Pure Sine Wave Grid Tie Inverter For 3 Phase Wind Turbine With Dump LCD

2000W LCD Grid Tie Inverter with Dump Load for 3 Phase Wind Turbine Generator MPPT Pure Since Wave Wind On Grid Inverter. The grid-tie inverter can transfer wind energy from wind generators directly into the home grid using no extra equipment. It can be connected to any outlet (conventional network) in the home. The grid-tie inverter controls the phase and the frequency and voltage of the power generated by the wind generator. It produces a pure sine-wave and matches that of the grid. This model grid-tie has build in bridge rectifier and dump load controller, it can maintain the rotating speed of the wind turbine and keep the voltage from the wind turbine always at the range of the rated range of the grid tie inverter. It also has a high voltage protection function, when the wind is too big, and the dump load controlling system cant keep the output voltage from the wind turbine, the controller will disconnect itself from the wind turbine, so it is very safe to be used. On the LCD Panel of the inverter, there is one AC output socket, that will connect the AC output cable to home grid. The LCD display will display the grid AC voltage, current , active power and electric. Electric parameters measurement function voltage, current and active power, electric. Running time function (record load cumulative working hours). Power down data save function (save the number of kWh, operation time). Large screen LCD display (display voltage, current, power, active power, cumulative running time). UP: Short press will display power, electricity, current and voltage in anti-sequence. DOWN: Short press will display power, electricity, current and voltage in sequence. BACK LIGHT: Short press will open or close backlight. Grid Tie Inverter 2000W. 1 Piece User Manual (English). We can offer original photoes and t. Normal AC Output Power. Maximum AC Output Power. AC Output Voltage Range. AC Output Frequency Range. Total Harmonic Distortion(THD). (the test point is at the output of the rectifier). 92%(Consumption of the rectifier is not calculated). 7-10 / 2-7 work days. 12-15 / 2-7 work days. Italy, France, Germany, Russia, Brazil, Argentina. 25-30 / 2-7 work days. We understand the concerns and frustrations you might have, and will do our endeavor to resolve the issues. Please give us the opportunity to resolve any problem. The item “2000W Pure Sine Wave Grid Tie Inverter For 3 Phase Wind Turbine With Dump LCD” is in sale since Friday, October 07, 2016. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “solarregulator” and is located in Shenzhen. This item can be shipped to North, South, or Latin America, to all countries in Europe, to all countries in continental Asia.

Brand: Y-SOLAR
Model: YS-2000G
Country/Region of Manufacture: China
Frequency:: 46Hz ~ 65Hz
Certification: CE ROHS
Type: Pure sine wave inverter
Function: With MPPT
MPN: 96992000

Category: 2000w | Comments Off

September 30

1500With2000W 45-90V DC/AC wind grid tie inverter with dump load resistor

1500W/2000W grid tie inverter for DC or AC wind turbine generators, 45-90V Input, 230V 120V AC(for 2000W, there is only 230V version). Pure sine wave MPPT. Dump load resistor included. For DC(WDL)/AC(WAL) Output Wind Turbine. Build In Dump Load Controller. Build In High Wind Protection. The grid-tie inverter can transfer wind energy from wind generators directly into the home grid using no extra equipment. It can be connected to any outlet (conventional network) in the home. The grid-tie inverter controls the phase and the. Frequency and voltage of the power generated by the wind generator. It produces a pure sine-wave and matches that of. This WDL grid tie inverter has designed for wind turbines that put out DC voltage WAL grid tie inverter was designed for. The wind turbine with 3 phase ac output0. It can maintain the rotating speed of the wind turbine and keep the voltage from. The wind turbine always at the range of the rated range of the grid tie inverter. It also has a high voltage protection function. When the wind is too big, and the dump load controlling system cant keep the output voltage from the wind turbine, the. Controller will disconnect itself from the wind turbine, so it is very safe to be used. Normal AC Output Power. Maximum AC Output Power. AC Output Frequency Range. Total Harmonic Distortion(THD). AC Input Voltage Range(3 phases). AC Output Voltage Range. Not available for now. DC Input Voltage Range. AC Input Voltage Range. On the LCD Panel of the inverter, there is one AC output socket, that will connect the AC output cable to home grid. The LCD display will display the grid AC voltage, current , active power and electric energy that combined to the grid. Electric parameters measurement function (voltage, current and active power, electric energy). Running time function (record load cumulative working hours). Power down data save function (save the number of kWh, operation time). Large screen LCD display (display voltage, current, power, active power, cumulative running time). UP: Short press will display power, electricity, current and voltage in anti-sequence. DOWN: Short press will display power, electricity, current and voltage in sequence. BACK LIGHT: Short press will open or close backlight. Have given more than 3 negative or netural feedbacks during past 60days. Have received 3 or more negativeor netural feedback during past 60days. Have opened dispute twice in past 60days. We believe that all problems could be. Fixed by communication between buyers and sellers as long as both of us are honest and understanding. The item “1500With2000W 45-90V DC/AC wind grid tie inverter with dump load resistor” is in sale since Thursday, May 26, 2016. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “sunhome910″ and is located in , . This item can be shipped to North, South, or Latin America, to all countries in Europe, to all countries in continental Asia, to Australia.

Brand: Ecopower
MPN: Does Not Apply
Country/Region of Manufacture: China

Category: 1500with2000w | Comments Off

August 10

500W Wind grid tie inverter 10.8-30VDC 110VAC Dump Load

500W Grid Tie Power Inverter DC 10.8-30V Wind Generator. For DC Wind Turbines, DC 10.8V30V, CE standard! The grid-tie inverter can transfer wind energy from wind generators directly into the home grid using no extra equipment. It can be connected to any outlet (conventional network) in the home. The grid-tie inverter controls the phase and the frequency and voltage of the power generated by the wind generator. It produces a pure sine-wave and matches that of the grid. This model grid-tie has build in bridge rectifier and dump load controller , it can maintain the rotating speed of the wind turbine and keep the voltage from the wind turbine always at the range of the rated range of the grid tie inverter. It also has a high voltage protection function , when the wind is too big, and the dump load controlling system cant keep the output voltage from the wind turbine, the controller will disconnect itself from the wind turbine, so it is very safe to be used. Normal AC Output Power. Maximum AC Output Power. AC Output Voltage Range. AC Output Frequency Range. Total Harmonic Distortion(THD). DC Input Voltage Range. 10 45 degrees C. There are 4 terminals on the left side of the inverter, one red terminal and one black will be connected to the phase output from the wind turbine, and 2 black terminals will be connected to dump load resistors. If there is no AC grid detected, the red LED will be on, the inverter will not put out power, and this is called Island Protection. A brand new power inverter. We will always try our best to find you a satisfactory solution if any problem takes place! No need refurn the original one for low-valued items. All return products should be in original package with all accessories included. We stand behind our products so you are always covered! Pleas message us if recipient address changes needed before we fullfill the order. Sorry, no local pickups available. We have proudly designed our own products and successfully created our own brands in the industries. In order to provide the peaceful shopping experience, our dedicated customer service teams can response to all the requests within 24 hours. Being our customer is a wise choice! The free listing tool. The item “500W Wind grid tie inverter 10.8-30VDC 110VAC Dump Load” is in sale since Friday, August 26, 2011. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “greenenv” and is located in San Jose, California. This item can be shipped to United States, to Canada, to Mexico.

Type: Grid Tie Inverters
Energy Type: Wind
Brand: Unbranded
MPN: Does Not Apply

Category: 500w | Comments Off

July 24

2000W Pure Sine Wave Grid Tie Inverter For 3 Phase Wind Turbine With Dump LCD

2000W LCD Grid Tie Inverter with Dump Load for 3 Phase Wind Turbine Generator MPPT Pure Since Wave Wind On Grid Inverter. The grid-tie inverter can transfer wind energy from wind generators directly into the home grid using no extra equipment. It can be connected to any outlet (conventional network) in the home. The grid-tie inverter controls the phase and the frequency and voltage of the power generated by the wind generator. It produces a pure sine-wave and matches that of the grid. This model grid-tie has build in bridge rectifier and dump load controller, it can maintain the rotating speed of the wind turbine and keep the voltage from the wind turbine always at the range of the rated range of the grid tie inverter. It also has a high voltage protection function, when the wind is too big, and the dump load controlling system cant keep the output voltage from the wind turbine, the controller will disconnect itself from the wind turbine, so it is very safe to be used. On the LCD Panel of the inverter, there is one AC output socket, that will connect the AC output cable to home grid. The LCD display will display the grid AC voltage, current , active power and electric. Electric parameters measurement function voltage, current and active power, electric. Running time function (record load cumulative working hours). Power down data save function (save the number of kWh, operation time). Large screen LCD display (display voltage, current, power, active power, cumulative running time). UP: Short press will display power, electricity, current and voltage in anti-sequence. DOWN: Short press will display power, electricity, current and voltage in sequence. BACK LIGHT: Short press will open or close backlight. Grid Tie Inverter 2000W. 1 Piece User Manual (English). We can offer original photoes and t. Normal AC Output Power. Maximum AC Output Power. AC Output Voltage Range. AC Output Frequency Range. Total Harmonic Distortion(THD). (the test point is at the output of the rectifier). 92%(Consumption of the rectifier is not calculated). 7-10 / 2-7 work days. 12-15 / 2-7 work days. Italy, France, Germany, Russia, Brazil, Argentina. 25-30 / 2-7 work days. We understand the concerns and frustrations you might have, and will do our endeavor to resolve the issues. Please give us the opportunity to resolve any problem. The item “2000W Pure Sine Wave Grid Tie Inverter For 3 Phase Wind Turbine With Dump LCD” is in sale since Friday, April 22, 2016. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “solarregulator” and is located in Shenzhen. This item can be shipped to North, South, or Latin America, to all countries in Europe, to all countries in continental Asia.

Brand: Y-SOLAR
Model: YS-2000G
Country/Region of Manufacture: China
Frequency:: 46Hz ~ 65Hz
Certification: CE ROHS
Type: Pure sine wave inverter
Function: With MPPT
MPN: 96992000

Category: 2000w | Comments Off

July 2

1000W Pure Sine Wave On Grid Tie Inverter For 3 Phase Wind Turbine With Dump LCD

WIND AC INPUT INVERTER. WIND DC INPUT INVERTER. The grid-tie inverter can transfer wind energy from wind generators directly into the home grid using no extra equipment. It can be connected to any outlet (conventional network) in the home. The grid-tie inverter controls the phase and the frequency and voltage of the power generated by the wind generator. It produces a pure sine-wave and matches that of the grid. This model grid-tie has build in bridge rectifier and dump load controller, it can maintain the rotating speed of the wind turbine and keep the voltage from the wind turbine always at the range of the rated range of the grid tie inverter. It also has a high voltage protection function, when the wind is too big, and the dump load controlling system cant keep the output voltage from the wind turbine, the controller will disconnect itself from the wind turbine, so it is very safe to be used. On the LCD Panel of the inverter, there is one AC output socket, that will connect the AC output cable to home grid. The LCD display will display the grid AC voltage, current , active power and electric. Electric parameters measurement function voltage, current and active power, electric. Running time function (record load cumulative working hours). Power down data save function (save the number of kWh, operation time). Large screen LCD display (display voltage, current, power, active power, cumulative running time). UP: Short press will display power, electricity, current and voltage in anti-sequence. DOWN: Short press will display power, electricity, current and voltage in sequence. BACK LIGHT: Short press will open or close backlight. Normal AC Output Power. Maximum AC Output Power. AC Output Voltage Range. AC Output Frequency Range. Total Harmonic Distortion(THD). (the test point is at the output of the rectifier). 92%(Consumption of the rectifier is not calculated). The item “1000W Pure Sine Wave On Grid Tie Inverter For 3 Phase Wind Turbine With Dump LCD” is in sale since Friday, July 01, 2016. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “solarregulator” and is located in Shenzhen. This item can be shipped to United States, to all countries in Europe, to all countries in continental Asia, to Canada, to Mexico, BR, to Australia.

Brand: Y-SOLAR
Model: YS-1000G
Country/Region of Manufacture: China
Frequency:: 46Hz ~ 65Hz
Certification: CE ROHS
Type: Pure sine wave inverter
Function: With MPPT
MPN: YS-1000G

Category: 1000w | Comments Off

June 8

1000W Wind Power Grid Tie Inverter with dump load, 22-60/45-90 DC/AC Input

INTRODUCTION The grid-tie inverter can transfer wind energy from wind generators directly into the home grid using no extra equipment. It can be connected to any outlet (conventional network) in the home. The grid-tie inverter controls the phase and the frequency. And voltage of the power generated by the wind generator. It produces a pure sine-wave and matches that of the grid. This model grid-tie has designed for wind turbines that put out 3 phases AC voltage. It can maintain the rotating speed of the. Wind turbine and keep the voltage from the wind turbine always at the range of the rated range of the grid tie inverter. It also has a. High voltage protection function, when the wind is too big, and the dump load controlling system cant keep the output voltage from. The wind turbine, the controller will disconnect itself from the wind turbine, so it is very safe to be used. Normal AC Output Power. Maximum AC Output Power. AC Output Frequency Range. Total Harmonic Distortion(THD). AC Input Voltage Range. (test point is at the output of the rectifier). The grid-tie inverter can transfer wind energy from wind generators directly into the home grid using no extra equipment. It can be connected to any. Outlet (conventional network) in the home. The grid-tie inverter controls the phase and the frequency and voltage of the power generated by the wind generator. It can maintain the rotating speed of the wind turbine and keep the. Voltage from the wind turbine always at the range of the rated range of the grid tie inverter. It also has a high voltage protection function, when the wind is. Too big, and the dump load controlling system cant keep the output voltage from the wind turbine, the controller will disconnect itself from the wind turbine. So it is very safe to be used. Electric parameters measurement function (voltage, current and active power, electric energy). Running time function (record load cumulative working hours). Power down data save function (save the number of kWh, operation time). Large screen LCD display (display voltage, current, power, active power, cumulative running time). Short press will display power, electricity, current and voltage in anti-sequence. Short press will display power, electricity, current and voltage in sequence. Short press will open or close backlight. 3 phase AC: 22V 60V/45-90. (DC 2260V, test point is at the output of the rectifier). The grid-tie inverter can transfer wind energy from wind generators directly into the home grid. Using no extra equipment. Grid-tie inverter controls the phase and the frequency and voltage of the power generated by the wind. This model grid-tie has build in bridge rectifier and dump load controller, it can maintain the rotating. Speed of the wind turbine and keep the voltage from the wind turbine always at the range of the rated. Range of the grid tie inverter. It also has a high voltage protection function, when the wind is too big, and. The dump load controlling system cant keep the output voltage from the wind turbine, the controller will. Disconnect itself from the wind turbine, so it is very safe to be used. (the test point is at the output of the rectifier). 992%(Consumption of the rectifier is not calculated). This model grid-tie has build in bridge rectifier and dump load controller, it can maintain the rotating speed of the wind turbine. And keep the voltage from the wind turbine always at the range of the rated range of the grid tie inverter. It also has a high voltage. Protection function, when the wind is too big, and the dump load controlling system cant keep the output voltage from the wind. Turbine, the controller will disconnect itself from the wind turbine, so it is very safe to be used. Have given more than 3 negative or netural feedbacks during past 60days. Have received 3 or more negativeor netural feedback during past 60days. Have opened dispute twice in past 60days. We believe that all problems could be fixed. By communication between buyers and sellers as long as both of us are honest and understanding. The item “1000W Wind Power Grid Tie Inverter with dump load, 22-60/45-90 DC/AC Input” is in sale since Thursday, February 12, 2015. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “sunhome910″ and is located in , . This item can be shipped to North, South, or Latin America, to all countries in Europe, to all countries in continental Asia, to Australia.

Brand: Ecopower
MPN: Does Not Apply
Country/Region of Manufacture: China

Category: 1000w | Comments Off

May 2024
M	T	W	T	F	S	S
« Apr
		1	2	3	4	5
6	7	8	9	10	11	12
13	14	15	16	17	18	19
20	21	22	23	24	25	26
27	28	29	30	31