Grid Tie Solar Inverter MPPT Pure Sine Wave DC30-45V PV Input AC120V/220V 1400W. Grid Tied inverter is a compact unit, which directly converts direct current into alternating current for powering appliances and/or office equipment’s and connecting to utility grid. The AC output from Smart Micro inverter is synchronized and in-phase with the utility grid. Please note that this inverter is designed for solar panels, which can be suitable for 12V Solar Panels, Vmp is 17-20V and Voc is 20-24V. If using 12v battery as input, the inverter will not reach it’s max power point. We will suggest using 24v battery as input source to get a better output power. There’s always a loss in power in conversion from DC to AC. Also through Heat loss of energy. So if you’re expecting to get you’re 100 % out of the machine it won’t give you that. Solar panel has the loss too, so please don’t calculate the efficiency as inverter output power/solar panel specification. Because solar panel and inverter all have own efficiency. Collect multiple customer fault feedback, most of which stop working are using the wrong solar panel voltage input? Please use a 10 square cable, the cable length is not recommended to exceed 4M. Tighten the DC terminal wiring. If the cable is too thin or the connection is loose, the inverter will be damaged. The Voltage of Matched solar panel :Vmp: 17-21V, Voc: 20-24V. AC Output Voltage: 120VAC(90-140VAC) or 230VAC(190-260VAC). Frequency Range: 48Hz 62Hz Auto. DC Input: 10.8V-30V. MPPT range: 15.5-23V. Vmp(of a solar panel) must be in the MPPT range to ensure the good output efficiency. The Voltage of Matched solar panel. Vmp: 18-21V, Voc: 20-24V. Vmp: 26-39V, Voc: 34-45V. 120VAC(90-140VAC) or 230VAC(190-260VAC). Islanding; Short-circuit; converse connection; Low Voltage; Over Voltage; Over temperature Protection. 1 Red and 1 Green. EN61000-6-3:2007 EN61000-6-1:2007. DIN VDE 1026 UL1741. How to easily set up Grid Tie Inverter? 1: Use 200W-1400W Solar Panel, Vmp17-20V; Voc 20-24V 2: Red terminal: Connect DC positive, black terminal: Connect DC negarive.. Be sure to tighten! Otherwise it will be short circuited. AC The output need to be connected to the grid power. 3:AC socket: Connection to the mains. The AC cord to the inverter 3 foot outlet, then the AC cord to home 3 pin AC outlet. 4:The switch of the home outlet must be turned on. Stackable connection The purpose is let small power inverter become high-power inverter. In order to achieve higher power use requirements, the use of this product can be stacked, such as: 4 grid inverters 1400W of stack used is equal to 4000W, and the number of open stacks (No Quantitative Restrictions). The Voltage of Matched solar panel: Vmp: 26-39V, Voc: 34-45V. MPPT range: 26V – 36V. Please note that this inverter is specially designed for solar panels and can be applied to 24V solar panels. Vmp is 26-39V and Voc is 34-45V. If a 12v battery is used as input, the inverter will not be able to reach its maximum Power point. We recommend using 36v battery as input source to get better output power. There is always a power loss in the conversion from DC to AC. Energy is also lost through heat. Therefore, if you want to be 100% off the machine, it will not give it to you. Solar panels also have losses, so please do not calculate the efficiency based on the inverter output power/solar panel specifications. Because solar panels and inverters have their own efficiency. Collected fault feedback from multiple customers, most of which stopped working because of the wrong solar panel voltage input. 1: Use 200W-1400W Solar Panel, Vmp: 28-39V, Voc: 34-46V. 2: Red terminal: Connect DC positive, black terminal: Connect DC negarive.. There may be some delays due to flight, holiday, weather, local post, local natural disaster impact. It must also be in the original packaging. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “audosta” and is located in this country: CN. This item can be shipped worldwide.

• Input Voltage: DC10.8-30V
• Output Voltage: 230VAC(190-260VAC)
• Size: 39*21*11CM
• Current Rating: Standard
• Model: 0570368562
• Output Type: Single
• Current Type: AC/DC
• System Configuration: Grid-Tie
• Type: On Grid Inverter
• Features: Durable
• MPN: 0570368582
• Power: 1400W
• Current Output: Standard
• Brand: Unbranded
• Application: Electronics
• Charging Mode: MPPT (Maximum Power Point Tracking)
• Waterproof: Indoor design
• Weight: 2.5KG
• MPPT voltage: 15.5-23V
• Output Current: 75A MAX
• Output Frequency: 50HZ/60HZ auto match
• Output Power: 1000KW
• Resistance Properties: Durable
• Voltage: DC30-45V PV Input AC120V/220V