November
30
Pv Anlage Selber Aufs Dach Montieren 9 5 Kw Mit K2 Systems Und Meyer Burger
November
29
Solar Grid Tie Inverter Waterproof Micro Inverter Pure Sine Wave Inverter 1200W
Plug Type: Us Standard? Maximum Input Dc Voltage: 54v? Peak Power Tracking Voltage: 22-45v? Operating Voltage Range: 17-50v? Min/Max Start-up Voltage: 22-50vdc? Maximum Dc Short Circuit Current: 80a? Maximum Input Operating Current: 54.4a? Peak Power Output: 1200watt? Rated Output Power: 1150watt? Rated Output Current: 9.58a? Rated Voltage Range: 80-160vac? Rated Frequency Range: 57-62.5hz? Max Unit per Branch Circut: 3pcs(Single-phase)? Static Mppt Efficiency: 99.5%? Maximum Output Efficiency: 91.2%? Night Time Power Loss. Solar Grid Tie Inverter Waterproof Micro Inverter Pure Sine Wave Inverter 1200W. Please Install the Inverter Correctly According to the Instructions. If You Have Any Questions, Please Contact the Relevant Personnel. Please Don’t Dismantle the Machine. Only Qualified Maintenance Personnel Can Repair the Inverter. Please Install the Inverter in a Place with Low Humidity and Good Ventilation to Avoid Overheating the Inverter and Remove the Surrounding Inflammable and Explosives. When Using This Inverter, Please Take Good Care of Your Children to Prevent Them from Touching and Playing to Avoid Electric Shock. Please Note That Our Products Are Grid-connected, the Ac Output Port Has to Be Connected to the Home Grid in Order to Achieve Grid-connected Power Generation. When the Input Load Is with Solar Panels, It Is Important That the Voc Voltage Is Between 30-48v. We Recommend That the Solar Panel Is Configured for 20% More Power than the Power of the Product. For Example, If the Product Is 600w, the Total Power of the Solar Panels Should Be Between 700-750w. When the Input Load Is a Battery, We Recommend a Battery Voltage of 36v, Which Can Be Connected in Series with 3 12v Batteries. Please Note That the Positive and Negative Polarity Should Not Be Reversed When Connecting the Product. The Recommended Battery Current Is 36v/10mah for 300w, 36v/20mah for 600w, and 36v/40-45mah for 1200w. The Input and Output Voltage of the Configuration Is Within the Normal Operating Voltage Range of the Product in Order for the Product to Work Properly and Achieve Grid-connected Power Generation. Please Allow the Slight Color Difference Caused by the Shooting Light and 1-3cm Error Due to Manual Measurement. Please Make Sure You Do Not Mind Before You Order. An Inverter Can Efficiently Turn the Direct Current Generated by Solar Panels into the Alternating Current Used by Household Appliances. This Micro Inverter Makes It Easier. Made of Fine Aluminum Alloy, This Ip65 Waterproof Inverter Has a Wide Range of Functions, Good Safety, Convenient Installation, and High-cost Performance. We Believe This Inverter Will Not Disappoint You. The Inverter Is Made of Aluminum Alloy, Which Is Durable, Corrosion-resistant, and Not Easy to Rust. You Can Use It for a Long Time Without Frequent Replacement, and Your Cost Can Be Saved. The Inverter Has Built-in High-precision Maximum Power Point Tracking, Which Can Optimize the Power Collection from the Solar Panel, Accurately Capture and Lock the Maximum Output Power Point, and Greatly Increase Power Generation to More than 25%. In Addition, the Efficient Power Reverse Transmission Technology Can Transmit the Power That Can Not Be Used up to the Grid in the Reverse Direction to Other Places for Use, and the Power Transmission Rate Can Reach 99.9%. The Inverter Is Equipped with an Lcd Display Screen to Monitor Voltage, Power, Frequency, Current, Etc. So You Can See the Machine Clearly in Operation. The Inverter Adopts Intelligent Soft Switching Technology, High-frequency Switching Power Supply Technology, and 32-Bit Dsp Full Digital Spwm Control Technology, Making the Product Strong Anti-interference Ability, Fast Operation Speed, High Intelligence, and a Powerful Functional System, Which Can Meet the Needs of Users. The Output and Input of the System Are Completely Electrically Isolated, the Insulation Performance of the Entire Power Distribution System Is Good, and the Fully Isolated Booster Circuit Is Safer and More Reliable. The Inverter Has Six Protection Functions: Over-temperature Protection, Under-voltage Alarm, Under-voltage Protection, Over-voltage Protection, Short Circuit Protection, Overload Protection, Etc. Besides, the Ip65 Waterproof Design Can Prevent Rain from Eroding Its Surface, so You Can Use It with Confidence. After the Installation of the Power Station, You Don’t Need to Do Maintenance Work. After a Long Time, You Only Need to Remove the Dust on the Photovoltaic Panel. Ith a Size of 8.2714.721.57inch, the Inverter Adopts High-frequency Telephone, Micro Processing, and Other Technologies, so It Is Smaller, Lighter, and Won’t Occupy Too Much Space. During Installation, You Can Stack Multiple Inverters at Will, Form a Single-phase Parallel Stacking. System, or Conveniently Form a Three-phase System to Provide a Three-phase Ac. We Have Been Working Hard to Provide Better Service and Quality for Our Customers, Which Is Our Goal. If There Is Any Quality Problem with Our Inverters. The Inverter Is Equipped with Two Gaskets to Help You Install the Photovoltaic Support, Making th. E Inverter More Stable. The Inverter Is Provided with Heat Dissipation Holes, Which Can Play a Good Role in Heat Dissipation and Prolong the Service Life of the Inverter. This Product Is Applicable to 30v or 36v Solar Panels, 36v Batteries. The Inverter Can Be Widely Used in Residential or Commercial Areas for Turning the Direct Current Generated by Solar Panels into Alternating Current. Step 1: Install the Inverter on the Support of the Photovoltaic Panel with the Screws Provided by the Machine. Step 2: Connect the Positive and Negative Poles of the Dc Connection Plug on the Photovoltaic Panel to the Dc Input Terminal of the Inverter. Step 3: Open the Waterproof Cover of the Ac Output Interface of the Inverter and Connect the Ac Cable to the Ac Waterproof Plug. Step 4: Connect the Ac Output Cable to the Ac Main Cable. Step 5: Repeat Steps 1 to 3 to Install and Connect All Inverters. Step 6: Connect the Ac Main Cable to the Public Grid and Start Your Green Energy Journey. Plug Type: Us Standard. Maximum Input Dc Voltage: 54v. Peak Power Tracking Voltage: 22-45v. Operating Voltage Range: 17-50v. Min/Max Start-up Voltage: 22-50vdc. Maximum Dc Short Circuit Current: 80a. Maximum Input Operating Current: 54.4a. Peak Power Output: 1200watt. Rated Output Power: 1150watt. Rated Output Current: 9.58a. Rated Voltage Range: 80-160vac. Rated Frequency Range: 57-62.5hz. Max Unit per Branch Circut: 3pcs(Single-phase). Static Mppt Efficiency: 99.5%. Maximum Output Efficiency: 91.2%. Communication Mode: Power Line Carrier. Power Transmission Mode: Reverse Transmission, Load Priority. Gross Weight: 4.08kg/8.99lbs. Net Weight: 2.88kg/6.35lbs. Product Size: 2137.44cm/8.2714.721.57inch. Package Size: 47.53411.5cm/18.713.394.53inch. Other Accessories for Installation. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. 1200W Grid Tie Inverter. MPPT (Maximum Power Point Tracking). Maximum Input DC Voltage. Peak Power Tracking Voltage. Maximum DC Short Circuit Current. Maximum Input Operating Current. Max Unit Per Branch Circut. Reverse Transmission, Load Priority. 2137.44cm/8.2714.721.57inch. 47.53411.5cm/18.713.394.53inch. 10 A or Less. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “forhappiness” and is located in this country: US. This item can be shipped to United States.
- Model: 1200W Grid Tie Inverter
- Brand: Y&H
- Application: Home/Garden
- Resistance Properties: Waterproof
- Inverter Technology: Microinverter
- Current Type: DC
- System Configuration: Grid-Tie
- Power Source: Solar
- Charging Mode: MPPT (Maximum Power Point Tracking)
- Recommend PV: 4*250~300W
- Rrequency: Auto switch 50HZ/60Hz
- Reccommend PV (Voc): 34~50V DC
- Type: Charger/Inverter
- Color: Silver
- Material: Aluminium Alloy
- Power: 1200W
- Voltage: 110V
- Maximum Input DC Voltage: 54V
- Peak Power Tracking Voltage: 22-45V
- Features: Corrosion Resistant
- Operating Voltage Range: 17-50V
- Min/Max Start-up Voltage: 22-50VDC
- Maximum DC Short Circuit Current: 80A
- Maximum Input Operating Current: 54.4A
- Peak Power Output: 1200watt
- Rated Output Power: 1150watt
- Rated Output Current: 9.58A
- Rated Voltage Range: 80-160VAC
- Rated Frequency Range: 57-62.5Hz
- Power Factor: ＞99％
- Max Unit Per Branch Circut: 3pcs(Single-phase)
- Static MPPT Efficiency: 99.5%
- Maximum Output Efficiency: 91.2%
- Ambient Temperature Range: ﹣40℃~60℃/﹣40℉~140℉
- Waterproof Rating: IP65
- Communication Mode: Power Line Carrier
- Power Transmission Mode: Reverse Transmission, Load Priority
- Gross Weight: 4.08kg/8.99lbs
- Net Weight: 2.88kg/6.35lbs
- Product Size: 21*37.4*4cm/8.27*14.72*1.57inch
- Package Size: 47.5*34*11.5cm/18.7*13.39*4.53inch
- Current Output: 10 A or Less
- Current Rating: 9.58A
November
29
1000W 1200W Grid-Tie Solar Inverter AC 110V/220V DC 24-72V/48-96V With Limiter
1000W solar grid-connected dual-purpose inverter (with limiter) WiFi model. 1200W solar grid-connected dual-purpose inverter (with limiter) WiFi model. 1000W solar on-grid dual-purpose inverter (with limiter) without WiFi. 1200W solar on-grid dual-purpose inverter (with limiter) without WiFi. Easy installation, can be connected in parallel on the AC side. Color LCD – can switch between Chinese and English to display various parameters. Wifi wireless communication expansion interface, the inverter power generation data can be collected through the wifi plug, and monitored on the PC webpage or mobile APP. Including: input voltage, output power, temperature, power curve, output sinusoidal waveform, etc. Internal limit function can be integrated. The battery discharge power mode is enabled, which automatically adjusts the depth of discharge of the battery pack. The Grid Tie Inverter converts the DC power produced by the solar panels to AC power, connects to the grid and feeds all available power from the solar panels to the AC load. Grid-connected mode: It must be connected to the public grid during. Installation, which is to connect the solar panel, the home electricity grid and the public grid (it is recommended to use it when the public grid is stable). Advantages: Compared with the off-grid mode, the grid-connected system is more stable and durable in connection with the public grid, and there is no need to install an additional power storage system, which can save the cost of installing a power storage system. Disadvantages: This is a power generation system that must rely on the existing grid to operate, and the electricity generated cannot be stored (a storage system can also be installed to store excess electricity generated by solar energy). Advantages: This power generation system is widely used because it is not limited by geographical areas. It can be installed and used as long as there is sunlight, so it is very suitable for remote areas without power grids, isolated islands, fishing boats, outdoor breeding bases, etc. It can also be used as a Emergency power generation equipment in areas with frequent power outages. 1000W MPPT solar grid-connected inverter, 4 kinds of DC input voltage specifications are optional. PV-voc voltage range: 26V45V or 24v battery. PV-voc voltage range: 40V-60V or 36v battery. PV-voc voltage range: 55V-90V or 48v battery. PV-voc voltage range: 85V-130V or 72v battery. 1200W MPPT solar grid-connected inverter, 3 kinds of DC input voltage. PV-voc voltage range: 55V90V or 48V battery. PV-voc voltage range: 80V-125V or 72V battery. PV-voc voltage range: 120V-180V or 96V battery. How to connect the sensor? Connect the RS485 line of the AC energy collection meter to the 485 port of the inverter. Insert the terminal of the transmission current sensor into the collector “CT-IN” port (no +-). Connect the AC power port “AC-IN” of the collector to the same AC power supply of the load. Once connected, it will light up. In the inverter LCD, enter “Battery Grid”, by SET {Bat AutoLimit Grid}. The inverter is connected to AC first, and then to the battery, and the inverter will automatically output the same power as the electricity detected by the collector. Therefore, the inverter will not have excess energy fed into the grid (ie: automatic limiter function). One collection meter can connect 10 grid-connected inverters. There are 4 modes. PV mode/PV limit mode/battery constant power mode/battery limit mode. 1000W/1200W solar grid-connected inverter (with limiter) WiFi model. (Note: This model has no display screen, any relevant parameters can be viewed through the APP, no display screen). 1000W/1200W solar grid-connected inverter (with limiter) without WiFi. (Note: This model has a display screen, any relevant parameters can be viewed through the display screen, no WiFi mode). This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “insideyourstyle” and is located in this country: CN. This item can be shipped worldwide.
- Wattages: 1000W
- Output voltages: 110V
- Input voltages: 24V
- Brand: Unbranded
- System Configuration: Grid-Tie
- Type: Charger/Inverter
- Charging Mode: MPPT (Maximum Power Point Tracking)
- Features: Freestanding, Automatic Voltage Detection, Wi-Fi Port, With Limiter
- Application: Automotive, Electronics, Commercial, Home/Garden
- Voltage: 11-20 V
- Power: 901-1000 W
- Power Source: Solar
- Inverter Technology: Microinverter
- Wattage: 900-999 W
- Color: Blue
- Custom Bundle: No
- Colour: Blue
November
28
700W Solar Grid Tie Micro Inverter For Solar Panel Grid Tie Waterproof Inverter
Description An inverter can efficiently turn the direct current generated by solar panels into the alternating current used by household appliances. This micro inverter makes it easier. Made of fine aluminum alloy, this IP65 waterproof inverter has a wide range of functions, good safety, convenient installation, and high-cost performance. We believe this inverter will not disappoint you. Key Features Premium Material: The inverter is made of aluminum alloy, which is durable, corrosion-resistant, and not easy to rust. You can use it for a long time without frequent replacement, and your cost can be saved. High Efficiency: The inverter has built-in high-precision maximum power point tracking, which can optimize the power collection from the solar panel, accurately capture and lock. 700W Solar Grid Tie Micro Inverter For Solar Panel Grid Tie Waterproof Inverter. An inverter can efficiently turn the direct current generated by solar panels into the alternating current used by household appliances. The inverter is made of aluminum alloy, which is durable, corrosion-resistant, and not easy to rust. The inverter has built-in high-precision maximum power point tracking, which can optimize the power collection from the solar panel, accurately capture and lock the maximum output power point, and greatly increase power generation to more than 25%. In addition, the efficient power reverse transmission technology can transmit the power that can not be used up to the grid in the reverse direction to other places for use, and the power transmission rate can reach 99.9%. The inverter is equipped with an LCD display screen to monitor voltage, power, frequency, current, etc. So you can see the machine clearly in operation. The inverter adopts intelligent soft switching technology, high-frequency switching power supply technology, and 32-bit DSP full digital SPWM control technology, making the product strong anti-interference ability, fast operation speed, high intelligence, and a powerful functional system, which can meet the needs of users. The output and input of the system are completely electrically isolated, the insulation performance of the entire power distribution system is good, and the fully isolated booster circuit is safer and more reliable. The inverter has six protection functions: over-temperature protection, under-voltage alarm, under-voltage protection, over-voltage protection, short circuit protection, overload protection, etc. Besides, the IP65 waterproof design can prevent rain from eroding its surface, so you can use it with confidence. After the installation of the power station, you don’t need to do maintenance work. After a long period of use, you only need to remove the dust from the photovoltaic panel. With a size of 8.392.289.84inch, the inverter adopts high-frequency telephone, micro processing, and other technologies, so it is smaller, lighter, and won’t occupy too much space. During installation, you can stack multiple inverters at will, form a single-phase parallel stacking system, or conveniently form a three-phase system to provide a three-phase AC. We have been working hard to provide better service and quality for our customers, which is our goal. If there is any quality problem with our inverters. The inverter is equipped with two gaskets to help you install the photovoltaic support, making the inverter more stable. The inverter is provided with heat dissipation holes, which can play a good role in heat dissipation and prolong the service life of the inverter. This product is applicable to 30V or 36V solar panels, 36V batteries. The inverter can be widely used in residential or commercial areas for turning the direct current generated by solar panels into alternating current. Step 1: Install the inverter on the support of the photovoltaic panel with the screws provided by the machine. Step 2: Connect the positive and negative poles of the DC connection plug on the photovoltaic panel to the DC input terminal of the inverter. Step 3: Open the waterproof cover of the AC output interface of the inverter and connect the AC cable to the AC waterproof plug. Step 4: Connect the AC output cable to the AC main cable. Step 5: Repeat steps 1 to 3 to install and connect all inverters. Step 6: Connect the AC main cable to the public grid and start your green energy journey. Plug Type: US Standard. Maximum Input DC Voltage: 54V. Peak Power Tracking Voltage: 22-45V. Operating Voltage Range: 17-50V. Min/Max Start-up Voltage: 22-50V. Maximum DC Short Circuit Current: 40A. Maximum Input Operating Current: 30A. Output Peak Power: 700watt. Rated Output Power: 650watt. Rated Output Current: 6.36A. Rated Voltage Range: 80-160VAC. Rated Frequency Range: 57-62.5Hz. Number of Circuit Connections Per String: 6. Static MPPT Efficiency: 99.5%. Maximum Output Efficiency: 91.2%. Night Time Power Loss. Communication Mode: Power Line Carrier. Power Transmission Mode: Reverse Transmission, Load Priority. Gross Weight: 2.48kg/5.47lbs. Net Weight: 1.63kg/3.59lbs. Product Size: 21.35.825cm/8.392.289.84inch. Package Size: 342411.5cm/13.399.454.53inch. 1 Solar Grid Tie Micro Inverter. Other Accessories for Installation. Please install the inverter correctly according to the instructions. If you have any questions, please contact the relevant personnel. Please don’t dismantle the machine. Only qualified maintenance personnel can repair the inverter. Please install the inverter in a place with low humidity and good ventilation to avoid overheating the inverter and remove the surrounding inflammable and explosives. When using this inverter, please take good care of your children to prevent them from touching and playing to avoid electric shock. Please note that our products are grid-connected, the AC output port has to be connected to the home grid in order to achieve grid-connected power generation. When the input load is with solar panels, it is important that the VOC voltage is between 30-48V. We recommend that the solar panel is configured for 20% more power than the power of the product. For example, if the product is 600W, the total power of the solar panels should be between 700-750W. When the input load is a battery, we recommend a battery voltage of 36V, which can be connected in series with 3 12V batteries. Please note that the positive and negative polarity should not be reversed when connecting the product. The recommended battery current is 36V/10mah for 300W, 36V/20mah for 600W, and 36V/40-45mah for 1200W. The input and output voltage of the configuration is within the normal operating voltage range of the product in order for the product to work properly and achieve grid-connected power generation. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement. Please make sure you do not mind before you order. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. Applicable to 30V or 36V solar panels, 36V batteries. LCD Display, Digital Control, Electrical Isolation, Safety Guard, Flexible Installation Mode, Small Footprint. Maximum Input DC Voltage. Peak Power Tracking Voltage. Maximum DC Short Circuit Current. Maximum Input Operating Current. Number of Circuit Connections Per String. Reverse Transmission, Load Priority. 21.35.825cm/8.392.289.84inch. Solar Grid Tie Micro Inverter. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “chengdukangten-5″ and is located in this country: US. This item can be shipped to United States.
- Application: Applicable to 30V or 36V solar panels, 36V batteries
- Current Output: /
- Current Type: /
- System Configuration: /
- Current Rating: /
- Features: LCD Display, Digital Control, Electrical Isolation, Safety Guard, Flexible Installation Mode, Small Footprint:
- Charging Mode: /
- Resistance Properties: /
- Model: WVC-700W
- Color: Silver
- Material: Aluminium Alloy
- Power: 700W
- Voltage: 110V
- Plug Type: US Standard
- Maximum Input DC Voltage: 54V
- Peak Power Tracking Voltage: 22-45V
- Operating Voltage Range: 17-50V
- Min/Max Start-up Voltage: 22-50V
- Maximum DC Short Circuit Current: 40A
- Maximum Input Operating Current: 30A
- Output Peak Power: 700watt
- Rated Output Power: 650watt
- Rated Output Current: 6.36A
- Rated Voltage Range: 80-160VAC
- Rated Frequency Range: 57-62.5Hz
- Power Factor: ＞99%
- Number of Circuit Connections Per String: 6
- Static MPPT Efficiency: 99.5%
- Maximum Output Efficiency: 91.2%
- Night Time Power Loss: <1W
- Total Flow Distortion: <5%
- Operating Temperature Range: ﹣40℃~60℃/﹣40℉~140℉
- Waterproof Rating: IP65
- Cooling Method: Self-cooling
- Communication Mode: Power Line Carrier
- Power Transmission Mode: Reverse Transmission, Load Priority
- Product Size: 21.3*5.8*25cm/8.39*2.28*9.84inch
- Brand: Unbranded
- Type: Solar Grid Tie Micro Inverter
- Wattage: 700W
- Power Source: Solar
November
28
WVC-700W Solar Grid Tie Micro Inverter for 30v/36v Solar Panels Waterproof-IP65
WVC-700W Solar Grid Tie Micro Inverter for 30v/36v Solar Panels Waterproof-IP65. An inverter can efficiently turn the direct current generated by solar panels into the alternating current used by household appliances. This micro inverter makes it easier. Made of fine aluminum alloy, this IP65 waterproof inverter has a wide range of functions, good safety, convenient installation, and high-cost performance. We believe this inverter will not disappoint you. The inverter is made of aluminum alloy, which is durable, corrosion-resistant, and not easy to rust. You can use it for a long time without frequent replacement, and your cost can be saved. The inverter has built-in high-precision maximum power point tracking, which can optimize the power collection from the solar panel, accurately capture and lock the maximum output power point, and greatly increase power generation to more than 25%. In addition, the efficient power reverse transmission technology can transmit the power that can not be used up to the grid in the reverse direction to other places for use, and the power transmission rate can reach 99.9%. The inverter is equipped with an LCD display screen to monitor voltage, power, frequency, current, etc. So you can see the machine clearly in operation. The inverter adopts intelligent soft switching technology, high-frequency switching power supply technology, and 32-bit DSP full digital SPWM control technology, making the product strong anti-interference ability, fast operation speed, high intelligence, and a powerful functional system, which can meet the needs of users. The output and input of the system are completely electrically isolated, the insulation performance of the entire power distribution system is good, and the fully isolated booster circuit is safer and more reliable. The inverter has six protection functions: over-temperature protection, under-voltage alarm, under-voltage protection, over-voltage protection, short circuit protection, overload protection, etc. Besides, the IP65 waterproof design can prevent rain from eroding its surface, so you can use it with confidence. After the installation of the power station, you don’t need to do maintenance work. After a long period of use, you only need to remove the dust from the photovoltaic panel. With a size of 8.392.289.84inch, the inverter adopts high-frequency telephone, micro processing, and other technologies, so it is smaller, lighter, and won’t occupy too much space. During installation, you can stack multiple inverters at will, form a single-phase parallel stacking system, or conveniently form a three-phase system to provide a three-phase AC. We have been working hard to provide better service and quality for our customers, which is our goal. If there is any quality problem with our inverters. The inverter is equipped with two gaskets to help you install the photovoltaic support, making the inverter more stable. The inverter is provided with heat dissipation holes, which can play a good role in heat dissipation and prolong the service life of the inverter. This product is applicable to 30V or 36V solar panels, 36V batteries. The inverter can be widely used in residential or commercial areas for turning the direct current generated by solar panels into alternating current. Step 1: Install the inverter on the support of the photovoltaic panel with the screws provided by the machine. Step 2: Connect the positive and negative poles of the DC connection plug on the photovoltaic panel to the DC input terminal of the inverter. Step 3: Open the waterproof cover of the AC output interface of the inverter and connect the AC cable to the AC waterproof plug. Step 4: Connect the AC output cable to the AC main cable. Step 5: Repeat steps 1 to 3 to install and connect all inverters. Step 6: Connect the AC main cable to the public grid and start your green energy journey. Plug Type: US Standard. Maximum Input DC Voltage: 54V. Peak Power Tracking Voltage: 22-45V. Operating Voltage Range: 17-50V. Min/Max Start-up Voltage: 22-50V. Maximum DC Short Circuit Current: 40A. Maximum Input Operating Current: 30A. Output Peak Power: 700watt. Rated Output Power: 650watt. Rated Output Current: 6.36A. Rated Voltage Range: 80-160VAC. Rated Frequency Range: 57-62.5Hz. Number of Circuit Connections Per String: 6. Static MPPT Efficiency: 99.5%. Maximum Output Efficiency: 91.2%. Night Time Power Loss. Communication Mode: Power Line Carrier. Power Transmission Mode: Reverse Transmission, Load Priority. Gross Weight: 2.48kg/5.47lbs. Net Weight: 1.63kg/3.59lbs. Product Size: 21.35.825cm/8.392.289.84inch. Package Size: 342411.5cm/13.399.454.53inch. 1 Solar Grid Tie Micro Inverter. Other Accessories for Installation. Please install the inverter correctly according to the instructions. If you have any questions, please contact the relevant personnel. Please don’t dismantle the machine. Only qualified maintenance personnel can repair the inverter. Please install the inverter in a place with low humidity and good ventilation to avoid overheating the inverter and remove the surrounding inflammable and explosives. When using this inverter, please take good care of your children to prevent them from touching and playing to avoid electric shock. Please note that our products are grid-connected, the AC output port has to be connected to the home grid in order to achieve grid-connected power generation. When the input load is with solar panels, it is important that the VOC voltage is between 30-48V. We recommend that the solar panel is configured for 20% more power than the power of the product. For example, if the product is 600W, the total power of the solar panels should be between 700-750W. When the input load is a battery, we recommend a battery voltage of 36V, which can be connected in series with 3 12V batteries. Please note that the positive and negative polarity should not be reversed when connecting the product. The recommended battery current is 36V/10mah for 300W, 36V/20mah for 600W, and 36V/40-45mah for 1200W. The input and output voltage of the configuration is within the normal operating voltage range of the product in order for the product to work properly and achieve grid-connected power generation. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement. Please make sure you do not mind before you order. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. Applicable to 30V or 36V solar panels, 36V batteries. LCD Display, Digital Control, Electrical Isolation, Safety Guard, Flexible Installation Mode, Small Footprint. Maximum Input DC Voltage. Peak Power Tracking Voltage. Maximum DC Short Circuit Current. Maximum Input Operating Current. Number of Circuit Connections Per String. Reverse Transmission, Load Priority. 21.35.825cm/8.392.289.84inch. Solar Grid Tie Micro Inverter. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “helloautoparts2017″ and is located in this country: US. This item can be shipped to United States.
- Application: Applicable to 30V or 36V solar panels, 36V batteries
- Current Output: /
- Current Type: /
- System Configuration: /
- Current Rating: /
- Features: LCD Display, Digital Control, Electrical Isolation, Safety Guard, Flexible Installation Mode, Small Footprint:
- Charging Mode: /
- Resistance Properties: /
- Model: WVC-700W
- Color: Silver
- Material: Aluminium Alloy
- Power: 700W
- Voltage: 110V
- Plug Type: US Standard
- Maximum Input DC Voltage: 54V
- Peak Power Tracking Voltage: 22-45V
- Operating Voltage Range: 17-50V
- Min/Max Start-up Voltage: 22-50V
- Maximum DC Short Circuit Current: 40A
- Maximum Input Operating Current: 30A
- Output Peak Power: 700watt
- Rated Output Power: 650watt
- Rated Output Current: 6.36A
- Rated Voltage Range: 80-160VAC
- Rated Frequency Range: 57-62.5Hz
- Power Factor: ＞99%
- Number of Circuit Connections Per String: 6
- Static MPPT Efficiency: 99.5%
- Maximum Output Efficiency: 91.2%
- Night Time Power Loss: <1W
- Total Flow Distortion: <5%
- Operating Temperature Range: ﹣40℃~60℃/﹣40℉~140℉
- Waterproof Rating: IP65
- Cooling Method: Self-cooling
- Communication Mode: Power Line Carrier
- Power Transmission Mode: Reverse Transmission, Load Priority
- Product Size: 21.3*5.8*25cm/8.39*2.28*9.84inch
- Brand: Unbranded
- Type: Solar Grid Tie Micro Inverter
November
27
1x Grid Tie Durable Inverter Inverter Solar Inverter IP65 Waterproof Control
1x Grid Tie Durable Inverter Inverter Solar Inverter IP65 Waterproof Control. Safe to use: The inverter can control each component independently of each other, minimising potential safety risks and preventing accidents. The inverter can be installed directly behind the module or on a bracket to simplify user maintenance. WiFi / app control: the inverter solar grid tie can be operated and monitored via WiFi or mobile app, which can significantly improve overall efficiency. High accuracy: can be operated and monitored via WiFi or mobile app, which is convenient to use and significantly improves overall work efficiency. The solar inverter has a high-precision instrument built-in, you can see the working status of each component, which is efficient and durable Single-phase output, Flexible 3-phase PV systems Integrated AC bus cable, Ready-To-Use Low cost, Easy installation Isolated Island Protection, Voltage Protection, Frequency Protection, Temperature Protection, Current Protection, etc. Matters needing attention. Use photovoltaic panel(s) ONLY connect to this equipment. This equipment is ON-GRID Microinverter, To make it work properly, it must be connected to the power grid correctly, and the power grid is working properly, When the power grid stopped working, it will also stop generating. Do NOT exceed PV panel(s) voltage over the inverter max input voltage. Do NOT exceed PV panel(s) power over the inverter max input power. DC voltage sources are pass through this equipment. Each circuit must be individually disconnected before servicing. Do NOT cover other items on this equipment. Do NOT remove the lid. Servicing must be performed by qualified service personnel. When PV array is exposed to light, it supples DC voltage to this equipment. Install away from direct sunlight and direct rain exposure. Also, the each additional item means exactly the the same color and size. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “dailyhome99″ and is located in this country: CN. This item can be shipped worldwide.
- Styles: 400W
- Brand: Unbranded
- Type: Micro inverter
- Package Contents: 1*Micro inverter 1*set screws and nuts 1*User Manual (English) 1*
- Material: aluminum alloy
- Voltage: 110-230V
November
27
SolarPower Grid-Tie Grid-tie Inverter Waterproof WiFi Mobile Monitoring
SolarPower Grid-Tie Grid-tie Inverter Waterproof WiFi Mobile Monitoring. The fifth generation WVC series communication products of us, adopt waterproof flow line design, which can provide better heat dissipation function for the equipment. The built-in maximum power point tracking engine (MPPT) can better capture changes in lighting, and it can work even in rainy weather. It can maximize the capture and collection of sunlight. The inverter is compatible with a variety of conventional solar panels with an open circuit voltage of 2260V, and the panel can exert its best performance through technical means. The power output mode of us Micro-Inverter is reverse transmission technology, which supplies power to the load first, and then uploads the excess power to the local power grid. Its conversion efficiency is as high as 95%. The product has multiple national invention and appearance patents, And has CE, +ETL, INMETRO, EMC and other regional and national product certification. The biggest feature of the photovoltaic grid-connected system is that the DC power generated by the photovoltaic array is converted into AC power that meets the requirements of the commercial power grid through the grid-connected inverter, and then directly connected to the commercial power grid. The power generated by the panel array in the grid-connected system is preferentially supplied to the AC At the load side, excess power is fed back to the grid. On rainy days or nights, when the photovoltaic array does not generate electrical energy or the generated electrical energy cannot meet the load demand, it is powered by the grid. Because the electric energy is directly input into the power grid, the configuration of the storage battery is eliminated, the process of storage and release of the storage battery is eliminated, and the power generated by the PV square array can be fully utilized to reduce the energy loss and reduce the cost of the system. However, a dedicated grid-connected inverter is required in the system to ensure that the output power meets the requirements of the grid power for voltage, frequency and other indicators. Because of the inverter efficiency, there will still be some energy loss. Such systems are usually able to use the mains and solar photovoltaic arrays in parallel as the source of local AC loads. Reduce the load power shortage rate of the entire system. And the grid-connected PV system can play a peak-shaving effect on the public power grid. In response to the characteristics of the grid-connected system, we has developed the first generation of micro-grid inverters as early as 2008, specifically for the recycling of electrical energy of various profit and loss. Provides a preliminary route for our product development and design direction, and overcomes a series of technical problems on the grid-connected system. Maximum power point tracking. Internal high precision meter. No installation, no maintenance. 5G lot platform management. Size:4337.511.5cm. 1 x Solar Inverter. 1 x AC cable. 1 x fixing screw. 1 x installation instruction. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness. Please allow slight manual measurement deviation for the data. For roof tiles, roof tiles, roof tiles. Please kindly note that. Also, the each additional item means. The the same color and size. Transit time may be a little delayed because of the. If you have any questions. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “dailyhome99″ and is located in this country: CN. This item can be shipped to United States.
- Brand: Unbranded
- Package Contents: 1 Set
- Size: 43*37.5*11.5cm
- Input voltage: 22V-60V
November
26
350W Solar-Microinverter MPPT Grid Tie Pure-Sine Wave Inverter DC18-50V
350W Solar-Microinverter MPPT Grid Tie Pure-Sine Wave Inverter DC18-50V. 100% brand new and high quality. The Grid Tie Inverter is a compact unit that converts direct current into alternating current to power equipment and/or office equipment and connect it to the mains. The AC output of the smart inverter is synchronized with the supply network and phase-equal. Individual unit is connected to a PV module. Single phase output and flexible 3-phase PV systems. Adjustable different input voltage ranges (DC, PV). Low cost and easy installation. Protection functions: Insulated island protection, voltage protection, frequency protection, temperature protection, current protection, etc. Use solar panel ONLY connect to this equipment. This equipment is ON-GRID Microinverter, To make it work properly, it must be connected to the power grid correctly, and the power grid is working properly, When the power grid stopped working, it will also stop generating. Do NOT exceed PV panel(s) voltage over the Solar Grid Tie Inverter max input voltage. Do NOT exceed PV panel(s) power over the Grid Tie solar Inverter max input power. The positive and negative poles of the solar panel cannot be reversed. If you extend the solar panel cable. You need to be careful about this problem. Install away from direct sunlight and direct rain exposure. Green light is on: inverter in generator operation. Red flashing: inverter waiting. Red light is on. Protection against too high/low AC frequency. Material:Shell aluminum alloy. MPPT voltage range: 24V-40V. Operating voltage range: 18V-50V. Maximum input voltage: 50V. Maximum input power: 350W. Maximum input current: 14A. Output power:320W (rated power) / 350 W (maximum). Rated output voltage and current:Single phase at 120 V: 2.66 A; at 230 V: 1.39 A. Peak efficiency: 92%/ MPPT 99.9%/ PF >0.99THD. Power consumption at night: -40 °C to +65 °C (environment) / -40 °C to +85 °C (storage). Dimensions (W x H x T) / Weight: 41mm x 1. 06 mm x 282mm to 0.95 kg. Cooling mode: Natural convection – no fans. 1 x Mains inverter. 1 x AC cable. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness. Please allow slight manual measurement deviation for the data. For roof tiles, roof tiles, roof tiles. Please kindly note that. Also, the each additional item means. The the same color and size. Transit time may be a little delayed because of the. If you have any questions. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “homeyoulike” and is located in this country: CN. This item can be shipped worldwide.
- Styles: 120V
- Marke: Marknelos
- Brand: Unbranded
November
26
Solar Grid Tie Inverter Waterproof Pure Sine Wave Inverter Blue Micro Inverter
Application This Product Is Applicable to 30v or 36v Solar Panels, 36v Batteries. The Inverter Can Be Widely Used in Residential or Commercial Areas for Turning the Direct Current Generated by Solar Panels into Alternating Current. Package Included 1 Micro Inverter 1 Power Cord 1 English Manual Other Accessories for Installation. Solar Grid Tie Inverter Waterproof Pure Sine Wave Inverter Blue Micro Inverter. Plug Type: Us Standard. Maximum Input Dc Voltage: 54v. Peak Power Tracking Voltage: 22-45v. Operating Voltage Range: 17-50v. Min/Max Start-up Voltage: 22-50vdc. Maximum Dc Short Circuit Current: 80a. Maximum Input Operating Current: 54.4a. Peak Power Output: 1200watt. Rated Output Power: 1150watt. Rated Output Current: 9.58a. Rated Voltage Range: 80-160vac. Rated Frequency Range: 57-62.5hz. Max Unit per Branch Circut: 3pcs(Single-phase). Static Mppt Efficiency: 99.5%. Maximum Output Efficiency: 91.2%. Night Time Power Loss. Communication Mode: Power Line Carrier. Power Transmission Mode: Reverse Transmission, Load Priority. Gross Weight: 4.08kg/8.99lbs. Net Weight: 2.88kg/6.35lbs. Product Size: 2137.44cm/8.2714.721.57inch. Package Size: 47.53411.5cm/18.713.394.53inch. Can Efficiently Turn the Direct Current Generated by Solar Panels into the Alternating Current Used by Household Appliances. This Micro Inverter Makes It Easier. Made of Fine Aluminum Alloy, This. Inverter Has a Wide Range of Functions, Good Safety, Convenient Installation, and High-cost Performance. We Believe This Inverter Will Not Disappoint You. The Inverter Is Made of Aluminum Alloy, Which Is Durable. And Not Easy to Rust. You Can Use It for a Long Time Without Frequent Replacement, and Your Cost Can Be Saved. The Inverter Has Built-in High-precision Maximum Power Point Tracking, Which Can Optimize the Power Collection from the Solar Panel, Accurately Capture and Lock the Maximum Output Power Point, and Greatly Increase Power Generation to More than 25%. In Addition, the Efficient Power Reverse Transmission Technology Can Transmit the Power That Can Not Be Used up to the Grid in the Reverse Direction to Other Places for Use, and the Power Transmission Rate Can Reach 99.9%. The Inverter Is Equipped with an Lcd Display Screen to Monitor Voltage, Power, Frequency, Current, Etc. So You Can See the Machine Clearly in Operation. The Inverter Adopts Intelligent Soft Switching Technology, High-frequency Switching Power Supply Technology, and 32-Bit Dsp Full Digital Spwm Control Technology, Making the Product Strong. Ability, Fast Operation Speed, High Intelligence, and a Powerful Functional System, Which Can Meet the Needs of Users. The Output and Input of the System Are Completely Electrically Isolated, the Insulation Performance of the Entire Power Distribution System Is Good, and the Fully Isolated Booster Circuit Is Safer and More Reliable. The Inverter Has Six Protection Functions: Over-temperature Protection, Under-voltage Alarm, Under-voltage Protection, Over-voltage Protection, Short Circuit Protection, Overload Protection, Etc. Design Can Prevent Rain from Eroding Its Surface, so. You Can Use It with Confidence. After the Installation of the Power Station, You Don’t Need to Do Maintenance Work. After a Long Time, You Only Need to Remove the Dust on the Photovoltaic Panel. With a Size of. 8.2714.721.57inch. The Inverter Adopts High-frequency Telephone, Micro Processing, and Other Technologies, so It Is Smaller, Lighter, and Won’t Occupy Too Much Space. During Installation, You Can Stack Multiple Inverters at Will, Form a Single-phase Parallel Stacking System, or Conveniently Form a Three-phase System to Provide a Three-phase Ac. We Have Been Working Hard to Provide Better Service and Quality for Our Customers, Which Is Our Goal. If There Is Any Quality Problem with Our Inverters. The Inverter Is Equipped with Two Gaskets to Help You Install the Photovoltaic Support, Making the Inverter More Stable. The Inverter Is Provided with Heat Dissipation Holes, Which Can Play a Good Role in Heat Dissipation and Prolong the Service Life of the Inverter. This Product Is Applicable to 30v or 36v Solar Panels, 36v Batteries. The Inverter Can Be Widely Used in Residential or Commercial Areas for. Turning the Direct Current Generated by Solar Panels into Alternating Current. Step 1: Install the Inverter on the Support of the Photovoltaic Panel with the Screws Provided by the Machine. Step 2: Connect the Positive and Negative Poles of the Dc Connection Plug on the Photovoltaic Panel to the Dc Input Terminal of the Inverter. Step 3: Open the Waterproof Cover of the Ac Output Interface of the Inverter and Connect the Ac Cable to the Ac Waterproof Plug. Step 4: Connect the Ac Output Cable to the Ac Main Cable. Step 5: Repeat Steps 1 to 3 to Install and Connect All Inverters. Step 6: Connect the Ac Main Cable to the Public Grid and Start Your Green Energy Journey. Other Accessories for Installation. Please Install the Inverter Correctly According to the Instructions. If You Have Any Questions, Please Contact the Relevant Personnel. Please Don’t Dismantle the Machine. Only Qualified Maintenance Personnel Can Repair the Inverter. Please Install the Inverter in a Place with Low Humidity and Good Ventilation to Avoid Overheating the Inverter and Remove the Surrounding Inflammable and Explosives. When Using This Inverter, Please Take Good Care of Your Children to Prevent Them from Touching and Playing to Avoid Electric Shock. Please Note That Our Products Are Grid-connected, the Ac Output Port Has to Be Connected to the Home Grid in Order to Achieve Grid-connected Power Generation. When the Input Load Is with Solar Panels, It Is Important That the Voc Voltage Is Between 30-48v. We Recommend That the Solar Panel Is Configured for 20% More Power than the Power of the Product. For Example, If the Product Is 600w, the Total Power of the Solar Panels Should Be Between 700-750w. When the Input Load Is a Battery, We Recommend a Battery Voltage of 36v, Which Can Be Connected in Series with 3 12v Batteries. Please Note That the Positive and Negative Polarity Should Not Be Reversed When Connecting the Product. The Recommended Battery Current Is 36v/10mah for 300w, 36v/20mah for 600w, and 36v/40-45mah for 1200w. The Input and Output Voltage of the Configuration Is Within the Normal Operating Voltage Range of the Product in Order for the Product to Work Properly and Achieve Grid-connected Power Generation. Please Allow the Slight Color Difference Caused by the Shooting Light and 1-3cm Error Due to Manual Measurement. Please Make Sure You Do Not Mind Before You Order. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. MPPT (Maximum Power Point Tracking). Maximum Input DC Voltage. Peak Power Tracking Voltage. Maximum DC Short Circuit Current. Maximum Input Operating Current. Max Unit Per Branch Circut. Reverse Transmission, Load Priority. 2137.44cm/8.2714.721.57inch. 47.53411.5cm/18.713.394.53inch. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “widesupplier999″ and is located in this country: US. This item can be shipped to United States.
- Brand: Unbranded
- Application: Home/Garden
- Resistance Properties: Waterproof
- Country/Region of Manufacture: Unknown
- Current Type: DC
- System Configuration: Grid-Tie
- Power Source: Solar
- Charging Mode: MPPT (Maximum Power Point Tracking)
- Type: Charger/Inverter
- Model: WVC-1200W
- Color: Blue
- Material: Aluminium Alloy
- Power: 1200W
- Voltage: 110V
- Plug Type: US Standard
- Maximum Input DC Voltage: 54V
- Peak Power Tracking Voltage: 22-45V
- Operating Voltage Range: 17-50V
- Min/Max Start-up Voltage: 22-50VDC
- Maximum DC Short Circuit Current: 80A
- Maximum Input Operating Current: 54.4A
- Peak Power Output: 1200watt
- Rated Output Power: 1150watt
- Rated Output Current: 9.58A
- Rated Voltage Range: 80-160VAC
- Rated Frequency Range: 57-62.5Hz
- Power Factor: ＞99％
- Max Unit Per Branch Circut: 3pcs(Single-phase)
- Static MPPT Efficiency: 99.5%
- Maximum Output Efficiency: 91.2%
- Night Time Power Loss: <1W
- Total Flow Distortion: <5%
- Ambient Temperature Range: ﹣40℃~60℃/﹣40℉~140℉
- Waterproof Rating: IP65
- Cooling Method: Self-cooling
- Communication Mode: Power Line Carrier
- Power Transmission Mode: Reverse Transmission, Load Priority
- Gross Weight: 4.08kg/8.99lbs
- Net Weight: 2.88kg/6.35lbs
- Product Size: 21*37.4*4cm/8.27*14.72*1.57inch
- Package Size: 47.5*34*11.5cm/18.7*13.39*4.53inch
November
25
Grid-tied Inverter Electrical Supplies 350W Communication Data For 2X250W
Grid-tied Inverter Electrical Supplies 350W Communication Data For 2X250W. Made of high quality materials, durable Model: 200W, 250W, 300W, 350W (optional) IP65 waterproof design (installed at the bottom of the solar panel) Communication data monitoring screen. Built-in high performance Maximum Power Point Tracking (MPPT) function Suitable for 2X250W-300W 36V solar panels (Vmp30-39V; Voc36-50V) aluminum alloy. Supports single-phase or three-phase connection. High precision phase detection; overvoltage and undervoltage protection; overfrequency and underfrequency protection; island protection. Product parameters: SG200MS: Inverter model: SG-200W MPPT voltage range: 24V-40V Working voltage range: 18V-50V Maximum input voltage: 50V Starting voltage: 18V Maximum input power: 200W Recommended solar panel: 200W, Voc: 36-50V AC rated voltage range: 220V Rated output power: 195W Maximum output power: 200W Default output voltage range: 230VAC (180V-280V) Rated output frequency: 50Hz/60Hz automatic Maximum number of units per branch: 120VAC: 4 units / 230VAC: 8 units Waterproof grade: IP65 Communication: 2.4G wireless (without communication box) SG300MS: Inverter model: SG-300W MPPT voltage range: 24V-40V Working voltage range: 18V-50V Maximum input voltage: 50V Starting voltage: 18V Maximum input power: 300W Recommended solar panel: 300W, Voc: 36-50V AC rated voltage range: 220V Rated output power: 295W Maximum output power: 300W Default output voltage range: 230VAC (180V-280V) Rated output frequency: 50Hz/60Hz automatic Maximum number of units per branch: 120VAC: 4 units / 230VAC: 8 units Waterproof grade: IP65 Communication: 2.4G wireless (without communication box) User notice: Vmp (of the solar panel) must be within the MPPT tracking range to ensure good output efficiency Use only the solar panel connected to this device. The device is an ON-GRID microinverter. In order for it to work, it must be properly connected to the power supply and the power supply must be working properly. When the grid stops working, it also stops generating electricity. Do not exceed the voltage of the PV modules to exceed the maximum input voltage of the solar grid-tied inverter. Also, the each additional item means exactly the the same color and size. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “cycloneboy99″ and is located in this country: CN. This item can be shipped worldwide.
- Styles: 350W
- Brand: Unbranded
- Type: Grid-tied inverter
- Package Contents: 1 * Grid-tied inverter (optional)