Grid Tie Inverter 18V 36V Solar Panel MPPT To AC110V 220V Pure Sine Wave 1000W. 1000W Grid Tie Inverter for 18V36V Solar Panel, MPPT function, DC 10.528V to AC 110V220V Pure Sine wave Micro On Grid Tie Inverter. Input and output 1? Input voltage range: 10.5V to 28VDC for GTI-500. Input voltage range: 22V to 50VDC for WV-500. Solar Panel: Recommend using the power more than 30W, the standard voltage of. 17.5V PV panel for GTI-500. 36V PV panel for WV-500. Recommend using multiple solar panels. Solar panel in series will result in high-input voltage which will exceed the working voltage range of the inverter. Voltage range of the inverter whose output is 220V AC. Voltage range of the inverter whose output is 110V AC. Directly connected to the solar panels (do not need to connect the battery). Using precise MPPT function, APL functions, the inverter automatically adjust the solar panels of maximum output power, simply connect the solar panel to the grid inverters. Do not need to connect the battery. AC 0 angle with high precision auto-detection. AC phase angle of 0 through isolation amplifier then input to the MCU for high-precision detection and analysis. The phase shift rate is less than 1%, thus achieve high-precision with phase modulation AC output together. In the process of the grid, usually adapt the same phase angle in parallel. Ie, When the two-phase alternating current total is equal to 0. Use switch to combination the two AC fusion and the product is rectified AC half-frequency AC to 100Hz first, then the machine use the high frequency current in the circuit and semi-100Hz frequency alternating current generated combination, to achieve high-frequency modulation. Pure Sine Wave Output. Use SPWM directly to make pure sine wave output. Automatic Sensing Function Solar Luminosity. Use the latest luminosity perception operation technology. The different illuminate angle and intensity of the solar panel will produce different current output. Use advanced CPU to operate the different illuminance and the data can be directly displayed on the LCD. Then you can visually see the sense of the strength of the sun unit. Power Automatically Locked (APL). In different current fluctuations, we should use the MPPT function. When the MPPT function adjusted to the maximum power point, the product automatically powers locked in maximum power point, then made the output power more stable. Maximum Power Point Tracking (MPPT). Because the current intensity and the voltage changes at any time, if there is no power point tracking, there will be a lot of problems. In the past time, usually adopt a solar controller, but this product uses high-precision MPPT operation power, automatic and immediate adjust the solar panels output power at the maximum output point, then achieve a stable output purposes. Automatically Adapt To Different Load Power Factor. Adapt to any of the power load. Constant Current, Constant Power. This product is constant current, constant output power, without any overload, over-current phenomenon. Automatically Shut Down When The Power Output Of a Fault. When the city power system is in failure, the inverter will automatically turn off the output. Multiple small power inverters in parallel can achieve large output power. High-Frequency High Conversion Rate. Adapt high frequency converter, the output more efficient. Recommend use solar panels. DC MAX input current. AC MAX output power. DC MAX Open-circuit input-voltage. DC input voltage range. MAX output power factor. DC input Reverse voltage protection. AC output voltage range. (120V versions:90140VAC)(230V versions:180260VAC). Output short circuit protection. LED mode:power instruction;voltage instruction;AC frequency instruction;over-voltage instruction. 60KHz modulation, power line carrier-current communication. 099%(Indoor Type Design). Each inverter size (L x W x H). 39 x 21 x11.3CM. Inner carton size(L x W x H). 42×31.5×36.5CM(1PC). Red terminal: Connect DC positive, black terminal: Connect DC negative. Show in figure 1. AC socket: Connect to the mains. Put the side of the AC cord, which has holes into the inverter with 3 foot, outlet and the other side of the AC cord to home 3PIN AC outlet. Show in figure 2. Figure 2 Figures 3. In order to achieve higher power use requirements, this product can be stacked, such as: 4-grid inverter1000W stacking can achieve 4000W. And the number of the stacking is unlimited. Used as shown in Figure 4. There may be some delays due to flight, holiday, weather, local post, local natural disaster impact. It must also be in the original packaging. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “audosta” and is located in this country: CN. This item can be shipped worldwide.

• Color: 1000W
• Input Voltage: GTI 10.5-30VDC
• Output Voltage: 90-140VAC 50HZ60HZ
• Size: 394*209*117mm
• Current Rating: Standard
• Model: 2518863750
• Country/Region of Manufacture: China
• Current Type: AC
• System Configuration: Grid-Tie
• Power Source: Standard
• Type: DC/AC Inverters
• Features: Durable
• MPN: 2518863770
• Power: 1000W
• Current Output: Standard
• Brand: Unbranded
• Application: Electronics
• Charging Mode: MPPT (Maximum Power Point Tracking)
• WV-1000 Input Voltage: 22-50v DC
• GTI-1000 Input Voltage: 10.5~30v DC
• Output Frequency: 50/60hz auto. sensing
• Output Power: 500 – 1000W
• Output Type: Single
• Weight: 2.8kg
• Resistance Properties: Durable
• Voltage: 18V 36V