WVC 600W 700W Solar Inverter Grid Tie MPPT Micro Inverter DC22-60V to 110V 220V

WVC 600W 700W Solar Inverter Grid Tie MPPT Micro Inverter DC22-60V to 110V 220V. 600 Grid Tie Solar Inverter suitable for 2X300W-375W 36V solar panel (Vmp30-39V; Voc36-50V) Vmp = operating voltage; Voc = open circuit voltage. Optimised for och power modules with 60 and 72 cells. Each MC4 branch must not exceed 375W. 700 Grid Tie Solar Inverter suitable for 2X350W-430W 36V solar panel (Vmp30-39V; Voc36-50V) Vmp = operating voltage; Voc = open circuit voltage. Each MC4 branch must not exceed 430 W. Please DO NOT connect the 230 V AC cable to wall sockets until all solar modules and inverters are properly connected. Micro-inverters convert the current from your solar modules into usable electricity. Single-phase microinverters are typically used in residential and small commercial environments (supports single-phase or three-phase connection). We have improved the AC cabling solution. Configure converters for faster installation. Avoid the risk of miswiring the fire, neutral and earth cables. Meanwhile, the DC input is equipped with an MC4 connector to avoid mixing up the positive and negative connections. (Some customers extend the solar module cable so that the positive and negative polarity are reversed). Grid Tie Inverter can monitor the power generated by the inverter via the AC digital meter in real time. (Voltage, current, active power, electrical energy, frequency, power factor) No fire hazard and no electric shock during installation and operation due to low DC voltage (up to 50 V) compared to at least 200 V of string inverters. Stackable connection; high precision phase detection; over and under voltage protection; over and under frequency protection; islanding protection. Almost no maintenance is required; occasionally remove the dust on the photovoltaic module. WVC series inverter With IP65 waterproof streamlined design, which effectively prevents rainwater on the surface erosion, built-in MPPT function to track the maximum power point with high power, which is better able to track changes in sun brightness and control different output power, effectively capture and collect sunlight AC electric power transmission using reverse transmission technology. The output power of the inverter can provide load priority, additional power to the grid and efficiently convert sunlight into clean and green electricity. Model:WVC-600W Rated voltage: 120V/230V(automatic detection) PV recommend: 2300W375W Recommended PV (Voc): 3450 V DC MPPT tracking voltage: 2840 V DC Maximum input current: 26A Rated output current: 2.39 A Maximum units per branch: 10 UNITS Frequency:Automatic switch 50/60Hz Ambient temperature: – 40? Dimensions: 283 mm × 200 mm × 41.6 mm Weight: 1.56 kg Cooling: Self-cooling Certificate: CE. Model: WVC-700W AC output voltage: 120 V/230 V (automatic detection) Rated output power: 700 W PV recommend: 2350W430W Operating temperature range: -40? Monitoring system: Mobile APP Waterproof: IP65 NEMA3R Cooling method: Self-cooling Rated frequency range: 48-51 Hz/58-61 Hz. Step 1: Install the inverter to the photovoltaic module bracket using the screws provided, as shown in the figure below: Step 2: Connect the positive and negative terminals of the DC connector on the photovoltaic board to the DC input terminal of the inverter as shown below: Step 3: Open the waterproof cover of the inverter’s AC output terminal and connect the AC cable to the waterproof AC connector. The connection method is as shown in the plug connection diagram: Step 4: Connect the AC output cable to the main AC cable; Step 5: Repeat steps 1 to 3, install and connect all inverters; Step 6: Connect the main AC cable to the utility grid to start your green energy journey. IP65 waterproof design (installed on the bottom of the solar panel). AC data monitoring screen. Built-in high power maximum power point tracking (MPPT) function. 4,600 Suitable for 2X300W-375W 36V solar panel (Vmp30-39V; Voc36-50V) 700 Suitable for 2X350W-430W 36V solar panel (Vmp30-39V; Voc36-50V) 5. Support single-phase or three-phase connection. High precision phase detection; Over and under voltage protection; Over and under frequency protection; Island protection. About the heating problem of the inverter. This is a normal phenomenon. All electronic devices generate heat during operation. The inverter uses aluminium alloy material. Metal can conduct heat better. The inverter also has over-temperature protection when the temperature is too high. Then the inverter automatically reduces the working power efficiency. Restart after cooling down. It is recommended to install the inverter in a ventilated, dry and cool place. After a large amount of customer data feedback, the inverter may not work because the DC or AC fuse is damaged. (The red light is on because the AC accessory is damaged, and if the light is off, the DC accessory is damaged). If this problem occurs, we can send you accessories free of charge. And give you maintenance video instructions. You can replace it easily. 1x micro inverter 1x Manual(English) 1x Bag Screw 1x 1 meter M25 male cable. Please contact me before you return it. If item is defective within 2 years, you can still send it back to us. We will send you a new one after receiving the defective item. Your fully satisfaction is our utmost priority. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “eforlady19″ and is located in this country: CN. This item can be shipped worldwide.

Product Type: 700W
Brand: Unbranded
Type: Charger/Inverter
System Configuration: Grid-Tie
Voltage: DC22-60V
Charging Mode: MPPT (Maximum Power Point Tracking)

Category: 600w | Comments Off

April 24

1400W Waterproof Solar Micro Inverter Grid Tie MPPT Pure Sine Wave DC to AC 110V

Specification Model: WVC-1400W Color: Silver Material: Aluminium Alloy Power: 1400W Voltage: 110V Plug Type: US Standard Maximum Input DC Voltage: 54V Peak Power Tracking Voltage: 22-45V Operating Voltage Range: 17-50V Min/Max Start-up Voltage: 22-50V Maximum DC Short Circuit Current: 80A Maximum Input Operating Current: 58A Output Peak Power: 1400watt Rated Output Power: 1350watt Rated Output Current: 12.8A Rated Voltage Range: 80-160VAC Rated Frequency Range: 57-62.5Hz Power Factor: >99% Number of Circuit Connections Per String: 3 Static MPPT Efficiency: 99.5% Maximum Output Efficiency: 91.2% Night Time Power Loss. Solar Micro Inverter 1400W Grid Tie MPPT Pure Sine Wave DC to AC 110V Waterproof. Solar Micro Inverter 1400W Grid Tie MPPT Pure Sine Wave Waterproof. Plug Type: US Standard. Maximum Input DC Voltage: 54V. Peak Power Tracking Voltage: 22-45V. Operating Voltage Range: 17-50V. Min/Max Start-up Voltage: 22-50V. Maximum DC Short Circuit Current: 80A. Maximum Input Operating Current: 58A. Output Peak Power: 1400watt. Rated Output Power: 1350watt. Rated Output Current: 12.8A. Rated Voltage Range: 80-160VAC. Rated Frequency Range: 57-62.5Hz. Number of Circuit Connections Per String: 3. Static MPPT Efficiency: 99.5%. Maximum Output Efficiency: 91.2%. Night Time Power Loss. Communication Mode: Power Line Carrier. Power Transmission Mode: Reverse Transmission, Load Priority. Gross Weight: 4.2kg/9.26lbs. Net Weight: 3kg/6.61lbs. Product Size: 2137.44cm/8.2714.721.57inch. Package Size: 483512cm/18.913.784.72inch. Can efficiently turn the direct current generated by solar panels into the alternating current used by household appliances. This microinverter makes it easier. Made of fine aluminum. Wide range of functions, good safety, convenient installation, and high-cost performance. We believe this inverter will not disappoint you. The inverter is made of aluminum alloy, which is durabl. E, corrosion-resistant, and n. Ot easy to rust. You can use it for a long time without frequent replacement, and your cost can be saved. The product adopts a unique circuit design, imported industrial electronic components, isolated high-frequency transformer, and unique MPPT technology, with efficiency greater than 99%, so it can achieve sensitive response and more stable maximum power point locking. The inverter adopts intelligent. Soft switching technology, high-frequency switching power supply technology, and 32-bit DSP full digital SPWM control technology, making the product strong anti-interference abili. Ty, fast operation speed, high intelligence, and a powerful functional system, which can meet the needs of users. The output and input of the system are completely electrically isolated, the insulation performance of the entire power distribution system is good, and the fully isolated booster circuit is safer and more reliable. Good Heat Dissipation Effect. The product adopts a self-cooling system and is designed with heat dissipation holes, which can timely reduce the temperature during operation, reduce potential safety hazards and extend the applicable life of the product. The inverter has six protection functions: over-temperature protection, under-voltage alarm, under-voltage protection, over-voltage protection, short circuit protection, overload protection, etc. N can prevent rain from eroding its surface, so. You can use it with confidence. After the installation of the power station, you don’t need to do maintenance work. After a long period of use, you only need to remove the dust from the photovoltaic panel. With a size of. 8.271.5714.72inch. The inverter adopts high-frequency telephone, micro processing, and other technologies, so it is smaller, lighter, and won’t occupy too much space. During installation, you can stack multiple inverters at will, form a single-phase parallel stacking system, or conveniently form a three-phase system to provide a three-phase AC. At the same time, we also provide a detailed manual and various accessories. You just need to follow the steps to install them. The inverter is equipped with two gaskets to help you install the photovoltaic support, making the inverter more stable. The corners of this product are very round, which can effectively reduce your skin scratches during installation or movement. The product uses an LED indicator, which mainly has two colors: red light and green light. You can master the product situation in time according to the color and flicker of the light, which is very convenient. This product is applicable to 30V or 36V solar panels, or 36V batteries. The inverter can be widely used in residential or commercial areas, power stations, and schools for turning the direct current generated by solar panels into alternating current. Step 1: Install the inverter on the support of the photovoltaic panel with the screws provided by the machine. Step 2: Connect the positive and negative poles of the DC connection plug on the photovoltaic panel to the DC input terminal of the inverter. Step 3: Open t. Er of the AC output interface of the inverter and connect the AC cable to the AC waterproof plug. Step 4: Connect the AC output cable to the AC main cable. Step 5: Repeat steps 1 to 3 to install and connect all inverters. Step 6: Connect the AC main cable to the public grid and start your green energy journey. 1 Solar Grid Tie Micro Inverter. Other Accessories for Installation. Please install the inverter correctly according to the instructions. If you have any questions, please contact the relevant personnel. Please don’t dismantle the machine. Only qualified maintenance personnel can repair the inverter. Please install the inverter in a place with low humidity and good ventilation to avoid overheating the inverter and remove the surrounding inflammable and explosives. When using this inverter, please take good care of your children to prevent them from touching and playing to avoid electric shock. Please note that connected solar panels, batteries, or wind generators DC input DC power supply cable. Please note that this inverter does not have a monitoring function. Please note that our products are grid-connected, the AC output port has to be connected to the home grid in order to achieve grid-connected power generation. When the input load is with solar panels, it is important that the VOC voltage is between 30-48V. We recommend that the solar panel is configured for 20% more power than the power of the product. For example, if the product is 600W, the total power of the solar panels should be between 700-750W. When the input load is a battery, we recommend a battery voltage of 36V, which can be connected in series with 3 12V batteries. Please note that the positive and negative polarity should not be reversed when connecting the product. The recommended battery current is 36V/10mah for 300W, 36V/20mah for 600W, and 36V/40-45mah for 1200W. The input and output voltage of the configuration is within the normal operating voltage range of the product in order for the product to work properly and achieve grid-connected power generation. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement. Please make sure you do not mind before you order. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. Maximum Input DC Voltage. Peak Power Tracking Voltage. Maximum DC Short Circuit Current. Maximum Input Operating Current. Number of Circuit Connections Per String. Reverse Transmission, Load Priority. 2137.44cm/8.2714.721.57inch. 483512cm/18.913.784.72inch. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “ycmjwangluo11″ and is located in this country: US. This item can be shipped to United States.

Features: Long service life
Brand: Unbranded
Power Source: Solar
Type: Charger/Inverter
Model: WVC-1400W
Application: Home/Garden
Voltage: 110V
Power: 1400W
Current Rating: 22-50V
Current Type: DC
Resistance Properties: Waterproof
Current Output: 110VAC
Material: Aluminium Alloy
Plug Type: US Standard
Maximum Input DC Voltage: 54V
Peak Power Tracking Voltage: 22-45V
Operating Voltage Range: 17-50V
Min/Max Start-up Voltage: 22-50V
Maximum DC Short Circuit Current: 80A
Maximum Input Operating Current: 58A
Output Peak Power: 1400watt
Rated Output Power: 1350watt
Rated Output Current: 12.8A
Rated Voltage Range: 80-160VAC
Rated Frequency Range: 57-62.5Hz
Power Factor: ＞99％
Number of Circuit Connections Per String: 3
Static MPPT Efficiency: 99.5%
Maximum Output Efficiency: 91.2%
Night Time Power Loss: <1W
Total Flow Distortion: <5%
Operating Temperature Range: ﹣40℃~60℃/﹣40℉~140℉
Waterproof Rating: IP65
Cooling Method: Self-cooling
Communication Mode: Power Line Carrier
Power Transmission Mode: Reverse Transmission, Load Priority
Gross Weight: 4.2kg/9.26lbs
Net Weight: 3kg/6.61lbs
Product Size: 21*37.4*4cm/8.27*14.72*1.57inch
Package Size: 48*35*12cm/18.9*13.78*4.72inch

Category: 1400w | Comments Off

April 24

Lumentree Grid Tie Inverter Sun 600 1000 2000 G2 Der Verkauf Geht Los

Category: lumentree | Comments Off

April 23

Digital Energy Microinverter 600W Solar Grid Tie Micro Inverter for Solar Panel

IP65 Waterproof Microinverter 600W Solar Grid Tie Micro Inverter for Solar Panel Description This microinverter can efficiently turn sunlight into clean and green power. The IP65 waterproof design and aluminum construction make it last longer. And it has a display that allows you to clearly see the machine in action. Its powerful output efficiently produces electricity for you to use. Application This product is applicable to 30V or 36V solar panels, 36V batteries. It can be used in residential and small commercial environments. It is suitable for various household appliances. It can convert the DC power generated by solar panels into AC power available for household appliances. Digital Energy Microinverter 600W Solar Grid Tie Micro Inverter for Solar Panel. IP65 Waterproof Microinverter 600W Solar Grid Tie Micro Inverter for Solar Panel. This microinverter can efficiently turn sunlight into clean and green power. High-quality Material: The microinverter is made of aluminum alloy, which is durable, corrosion-resistant, and not easy to rust. You can use it for a long time without frequent replacement. Reverse Power Transmission: This item adopts highly efficient reverse power transmission technology, in which the power is transmitted in the reverse direction when in grid-connected output mode, automatically detecting the load in the circuit and giving priority to its use, making the output more efficient in photovoltaic power generation application systems. Maximum Power Point Tracking: A powerful maximum power point tracking algorithm to optimize power harvesting from solar panels that precisely captures and targets the maximum output power point, resulting in a significant increase in power generation. Electrical Isolation: The complete electrical isolation of the machine’s output and input makes the entire power distribution system well insulated and the use of fully isolated boost circuits makes it safer and more reliable to use. Six-fold Protection: The product comes with over-temperature protection, under-voltage alarm, under-voltage protection, over-voltage protection, short-circuit protection, and overload protection, so you can use it with confidence. Flexible Installation: This inverter can be stacked in any number of units, forming a single-phase parallel stacking system or easily forming a three-phase system to provide three-phase AC power, which you can install according to your specific needs. Easy Maintenance: Once installed, this machine requires little maintenance and only needs to be cleaned of dust from the PV panels. HD Display: This microinverter is equipped with an LCD display screen to monitor voltage, power, frequency, current, etc. So you can see the machine clearly in operation. Good Waterproof Performance: IP65 waterproof design and aluminum alloy material can effectively prevent rain from eroding the surface, you can use it with confidence. Environmentally Friendly : This micro-inverter converts the direct current generated by the solar panels into alternating current and provides a continuous source of energy that is environmentally friendly and pollution-free. Small Footprint: With dimensions of just 21.35.825cm/8.392.289.84inch, this micro-inverter does not take up much space and can be installed in even small shops. Full Digital Control: The machine adopts full digital control technology, which makes the machine have a strong anti-interference ability, fast computing speed, and a high degree of intelligence. Its powerful functional system can meet your usage needs. It is our pleasure to answer your confusion and questions. Fixed Gasket&Washer: The gasket and washer in the package help you to mount the PV bracket with great ease. Heat Dissipation Holes: The inverter body has multiple heat dissipation holes, which help the machine to dissipate heat and enable it to run smoothly. This product is applicable to 30V or 36V solar panels, 36V batteries. Install the inverter on the bracket of the photovoltaic panel with the screws provided by the machine. Connect the positive and negative poles of the DC connection plug on the photovoltaic board to the DC input terminal of the inverter. Open the waterproof cover of the AC output connector of the inverter and connect the AC cable to the AC waterproof plug. Connect the AC output cable to the AC main cable. Repeat steps 1 to 3, install and connect all inverters. Connect the AC main cable to the utility grid to start your green energy journey. Operating Temperature Range: -40? VOC Voltage Range: 36-48V. Maximum Output DC Voltage: 54V. Peak Power Tracking Voltage: 22-45V. Operating Voltage Range: 17-50V. Min/Max Startup Voltage: 22-50V. Maximum DC Short Circuit Current: 40A. Maximum Input Operating Current: 27.2A. Peak Output Power: 600W. Rated Output Power: 550W. Rated Output Current: 4.58A. Rated Voltage Range: 80-160VAC. Rated Frequency Range: 57-62.5Hz. Static MPPT Efficiency: 99.5%. Output Efficiency: 91.2%. Recommended Battery Parameters: 36V/20mah. Gross Weight: 2.48kg/5.47lbs. Net Weight: 1.63kg/3.59lbs. Product Size: 21.35.825cm/8.392.289.84inch. Package Size: 342411.5cm/13.399.454.53inch. 1 AC Connection Cable. Other Accessories for Installation. Please read the operating manual completely before use. And pay particular attention to the safety instructions included. Please note that our products are grid-connected, the AC output port has to be connected to the home grid in order to achieve grid-connected power generation. When the input load is with solar panels, it is important that the VOC voltage is between 30-48V. We recommend that the solar panel is configured for 20% more power than the power of the product. For example, if the product is 600W, the total power of the solar panels should be between 700-750W. When the input load is a battery, we recommend a battery voltage of 36V, which can be connected in series with 3 12V batteries. Please note that the positive and negative polarity should not be reversed when connecting the product. The recommended battery current is36V/20mah for 600W. The input and output voltage of the configuration is within the normal operating voltage range of the product in order for the product to work properly and achieve grid-connected power generation. Please do not dismantle the inverter by non-specialists, only qualified service personnel should repair this product. Please install the inverter in a place with low humidity, good ventilation and cool places to avoid overheating the inverter and remove flammable and explosive materials from the surrounding area. When using this product, avoid children touching and playing with it to avoid electric shock. Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. Compact Design, Unique Appearance, high reliability. Maximum Output DC Voltage. Peak Power Tracking Voltage. Maximum DC Short Circuit Current. Maximum Input Operating Current. 21.35.825cm/8.392.289.84inch. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “topeakstore” and is located in this country: US. This item can be shipped to United States.

Highlights: Compact Design,Unique Appearance，high reliability
Brand: Unbranded
Type: Micro Inverter
Model: WVC-600W
Color: Blue
Material: Aluminium Alloy
Power: 600W
Voltage: 110V
Plug: US Standard
Operating Temperature Range: -40℃~60℃/-40℉~140℉
Waterproof Rating: IP65
Cooling Method: Self-cooling
VOC Voltage Range: 36-48V
Maximum Output DC Voltage: 54V
Peak Power Tracking Voltage: 22-45V
Operating Voltage Range: 17-50V
Min/Max Startup Voltage: 22-50V
Maximum DC Short Circuit Current: 40A
Maximum Input Operating Current: 27.2A
Peak Output Power: 600W
Rated Output Power: 550W
Rated Output Current: 4.58A
Rated Voltage Range: 80-160VAC
Rated Frequency Range: 57-62.5Hz
Static MPPT Efficiency: 99.5%
Max. Output Efficiency: 91.2%
Nighttime Power Loss: <1W
Total Flow Distortion: <5%
Recommended Battery Parameters: 36V/20mah
Product Size: 21.3*5.8*25cm/8.39*2.28*9.84inch
Wattage: 600w

Category: digital | Comments Off

April 23

HiQ Solar Grid-Tie Inverter 120VAC/2With60Hz HIQGTWY-A-11 (200)

HiQ Solar Grid-Tie Inverter 120VAC/2W/60Hz HIQGTWY-A-11 (200). If it is not shown in the pictures it doesn’t come with the item i. Power cords, attachments, tooling, etc. In order to find the contact number look for the You can also. Once clicked, this will show the number to call. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “gearheadsurplus” and is located in this country: US. This item can be shipped to United States.

Type: Business & Industrial
MPN: HIQGTWY-A-11
Brand: HiQ Solar Grid-Tie Inverter 120VAC/2W/60Hz (BRB1)

Category: solar | Comments Off

April 22

Digital 600W Solar Grid Tie Micro Inverter AC110V-Output Energy Microinverter

IP65 Waterproof Microinverter 600W Solar Grid Tie Micro Inverter for Solar Panel Description This microinverter can efficiently turn sunlight into clean and green power. The IP65 waterproof design and aluminum construction make it last longer. And it has a display that allows you to clearly see the machine in action. Its powerful output efficiently produces electricity for you to use. Application This product is applicable to 30V or 36V solar panels, 36V batteries. It can be used in residential and small commercial environments. It is suitable for various household appliances. It can convert the DC power generated by solar panels into AC power available for household appliances. Digital 600W Solar Grid Tie Micro Inverter AC110V-Output Energy Microinverter. IP65 Waterproof Microinverter 600W Solar Grid Tie Micro Inverter for Solar Panel. This microinverter can efficiently turn sunlight into clean and green power. High-quality Material: The microinverter is made of aluminum alloy, which is durable, corrosion-resistant, and not easy to rust. You can use it for a long time without frequent replacement. Reverse Power Transmission: This item adopts highly efficient reverse power transmission technology, in which the power is transmitted in the reverse direction when in grid-connected output mode, automatically detecting the load in the circuit and giving priority to its use, making the output more efficient in photovoltaic power generation application systems. Maximum Power Point Tracking: A powerful maximum power point tracking algorithm to optimize power harvesting from solar panels that precisely captures and targets the maximum output power point, resulting in a significant increase in power generation. Electrical Isolation: The complete electrical isolation of the machine’s output and input makes the entire power distribution system well insulated and the use of fully isolated boost circuits makes it safer and more reliable to use. Six-fold Protection: The product comes with over-temperature protection, under-voltage alarm, under-voltage protection, over-voltage protection, short-circuit protection, and overload protection, so you can use it with confidence. Flexible Installation: This inverter can be stacked in any number of units, forming a single-phase parallel stacking system or easily forming a three-phase system to provide three-phase AC power, which you can install according to your specific needs. Easy Maintenance: Once installed, this machine requires little maintenance and only needs to be cleaned of dust from the PV panels. HD Display: This microinverter is equipped with an LCD display screen to monitor voltage, power, frequency, current, etc. So you can see the machine clearly in operation. Good Waterproof Performance: IP65 waterproof design and aluminum alloy material can effectively prevent rain from eroding the surface, you can use it with confidence. Environmentally Friendly : This micro-inverter converts the direct current generated by the solar panels into alternating current and provides a continuous source of energy that is environmentally friendly and pollution-free. Small Footprint: With dimensions of just 21.35.825cm/8.392.289.84inch, this micro-inverter does not take up much space and can be installed in even small shops. Full Digital Control: The machine adopts full digital control technology, which makes the machine have a strong anti-interference ability, fast computing speed, and a high degree of intelligence. Its powerful functional system can meet your usage needs. It is our pleasure to answer your confusion and questions. Fixed Gasket&Washer: The gasket and washer in the package help you to mount the PV bracket with great ease. Heat Dissipation Holes: The inverter body has multiple heat dissipation holes, which help the machine to dissipate heat and enable it to run smoothly. This product is applicable to 30V or 36V solar panels, 36V batteries. Install the inverter on the bracket of the photovoltaic panel with the screws provided by the machine. Connect the positive and negative poles of the DC connection plug on the photovoltaic board to the DC input terminal of the inverter. Open the waterproof cover of the AC output connector of the inverter and connect the AC cable to the AC waterproof plug. Connect the AC output cable to the AC main cable. Repeat steps 1 to 3, install and connect all inverters. Connect the AC main cable to the utility grid to start your green energy journey. Operating Temperature Range: -40? VOC Voltage Range: 36-48V. Maximum Output DC Voltage: 54V. Peak Power Tracking Voltage: 22-45V. Operating Voltage Range: 17-50V. Min/Max Startup Voltage: 22-50V. Maximum DC Short Circuit Current: 40A. Maximum Input Operating Current: 27.2A. Peak Output Power: 600W. Rated Output Power: 550W. Rated Output Current: 4.58A. Rated Voltage Range: 80-160VAC. Rated Frequency Range: 57-62.5Hz. Static MPPT Efficiency: 99.5%. Output Efficiency: 91.2%. Recommended Battery Parameters: 36V/20mah. Gross Weight: 2.48kg/5.47lbs. Net Weight: 1.63kg/3.59lbs. Product Size: 21.35.825cm/8.392.289.84inch. Package Size: 342411.5cm/13.399.454.53inch. 1 AC Connection Cable. Other Accessories for Installation. Please read the operating manual completely before use. And pay particular attention to the safety instructions included. Please note that our products are grid-connected, the AC output port has to be connected to the home grid in order to achieve grid-connected power generation. When the input load is with solar panels, it is important that the VOC voltage is between 30-48V. We recommend that the solar panel is configured for 20% more power than the power of the product. For example, if the product is 600W, the total power of the solar panels should be between 700-750W. When the input load is a battery, we recommend a battery voltage of 36V, which can be connected in series with 3 12V batteries. Please note that the positive and negative polarity should not be reversed when connecting the product. The recommended battery current is36V/20mah for 600W. The input and output voltage of the configuration is within the normal operating voltage range of the product in order for the product to work properly and achieve grid-connected power generation. Please do not dismantle the inverter by non-specialists, only qualified service personnel should repair this product. Please install the inverter in a place with low humidity, good ventilation and cool places to avoid overheating the inverter and remove flammable and explosive materials from the surrounding area. When using this product, avoid children touching and playing with it to avoid electric shock. Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. Compact Design, Unique Appearance, high reliability. Maximum Output DC Voltage. Peak Power Tracking Voltage. Maximum DC Short Circuit Current. Maximum Input Operating Current. 21.35.825cm/8.392.289.84inch. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “acmotorstore01″ and is located in this country: US. This item can be shipped to United States.

Highlights: Compact Design,Unique Appearance，high reliability
Brand: Unbranded
Type: Micro Inverter
Model: WVC-600W
Color: Blue
Material: Aluminium Alloy
Power: 600W
Voltage: 110V
Plug: US Standard
Operating Temperature Range: -40℃~60℃/-40℉~140℉
Waterproof Rating: IP65
Cooling Method: Self-cooling
VOC Voltage Range: 36-48V
Maximum Output DC Voltage: 54V
Peak Power Tracking Voltage: 22-45V
Operating Voltage Range: 17-50V
Min/Max Startup Voltage: 22-50V
Maximum DC Short Circuit Current: 40A
Maximum Input Operating Current: 27.2A
Peak Output Power: 600W
Rated Output Power: 550W
Rated Output Current: 4.58A
Rated Voltage Range: 80-160VAC
Rated Frequency Range: 57-62.5Hz
Static MPPT Efficiency: 99.5%
Max. Output Efficiency: 91.2%
Nighttime Power Loss: <1W
Total Flow Distortion: <5%
Recommended Battery Parameters: 36V/20mah
Product Size: 21.3*5.8*25cm/8.39*2.28*9.84inch
Wattage: 600w

Category: digital | Comments Off

April 22

700W Solar Micro Inverter Grid Tie MPPT Pure Sine Wave DC to AC 120V Waterproof

Specification Material: Aluminum Alloy Color: Silver Model: XJ-WVC-700W Plug: US Standard Voltage: 110V Maximum Input Power: 2 × 350W Recommended Solar Panel: Power 2 × 350W, Open Circuit Voltage 30-50V Maximum Input DC Voltage: 54V Peak Power Tracking Voltage: 22-45V Operating Voltage Range: 17-50V Minimum/Maximum Starting Voltage: 22-50V Maximum DC Short Circuit Current: 40A Maximum Input Working Current: 30A Output Voltage: 120V Output Peak Power: 700W Rated Output Power: 650Watt Rated Output Current: 6.36A Rated Voltage Range: 80-160VAC Rated Frequency Range: 57-62.5Hz Power factor: >99% Number of Connections Per Series Circuit: 6 (Single-phase) Output Efficiency: 120V Static MPPT Efficiency: 99.5% Maximum Output Efficiency: 91.2% Power Loss at Night. Waterproof Solar Micro Inverter 700W Grid Tie MPPT Pure Sine Wave DC to AC 120V. Solar Micro Inverter 700W Grid Tie MPPT Pure Sine Wave DC 22-50V to AC 120V Waterproof. Maximum Input Power: 2 × 350W. Recommended Solar Panel: Power 2 × 350W, Open Circuit Voltage 30-50V. Maximum Input DC Voltage: 54V. Peak Power Tracking Voltage: 22-45V. Operating Voltage Range: 17-50V. Minimum/Maximum Starting Voltage: 22-50V. Maximum DC Short Circuit Current: 40A. Maximum Input Working Current: 30A. Output Peak Power: 700W. Rated Output Power: 650Watt. Rated Output Current: 6.36A. Rated Voltage Range: 80-160VAC. Rated Frequency Range: 57-62.5Hz. Number of Connections Per Series Circuit: 6 (Single-phase). Static MPPT Efficiency: 99.5%. Maximum Output Efficiency: 91.2%. Power Loss at Night. Operating Temperature Range: – 40? Heat Dissipation Mode: Self Cooling. Power Grid Disturbance: EN61000-3-2 Safety Regulation EN62109. Grid Detection: DIN VDE 1026 UL1741. Gross Weight: 2.45kg/5.4lbs. Net Weight: 1.8kg/3.96lbs. Package Size: 342411.5cm/13.389.444.52in. Product Size: 21.35.825cm/8.392.289.84in. With a powerful MPPT algorithm and a 99.9% efficient transmission rate, this solar inverter can greatly improve conversion efficiency while providing stable AC power for home appliances. With high-quality materials and multiple protection features, this solar inverter can serve you for a long time. The product’s built-in MPPT Max. Power Point Tracking optimizes power collection from the solar panel and precisely captures and locks the maximum output power point to significantly increase power generation to more than 25%. The 99.9% efficient reverse power transmission technology transmits the power in the reverse direction in grid-connected output mode while automatically detecting the load in the circuit and prioritizing its use, which greatly improves transmission efficiency. Pure Positive Sine Wave. The product uses SPWM to directly generate a pure positive sine wave with good waveform, low distortion, and low noise to make the radio and other communication devices feel better. The inverter dial fast using high-frequency switching power supply technology and 32-bit DSP fully digital SPWM control technology provides the product with excellent. Capability, high-speed computing capability, and intelligence. Grid-connected and Off-grid Stacking Mode. Inverters can be stacked in parallel with any number of units for both grid-connected and off-grid use. After the main monitoring system sends the main control signal the inverter receives the main control signal for synchronous output. The whole power distribution system is well insulated and the output of the system is completely electrically isolated from the input, which makes the use safer and more reliable. Over-temperature protection, under-voltage alarm, under-voltage protection, over-voltage protection, short-circuit protection, and overload protection protect the safety of use in all aspects. Multiple inverters can be stacked arbitrarily, forming a single-phase parallel stacking system or a three-phase system to provide three-phase AC power conveniently. Flexible installation allows for a wider range of applications. The power station only needs to clean the. On the PV panel regularly after installation, which makes it very convenient and quick. The upgraded miniature design makes the product size only 8.392.289.84 inches and net weight only 3.96 pounds, which makes it easy to carry and install. The solar inverter is made of high-quality aluminum alloy, which is very strong, durable, and. To be able to serve you for a long time. High-quality material and stable structure bring the product IP65 excellent. Performance so that it can effectively group the influence of. And water, and can operate stably outdoors. We aim to provide quality products and services. We will reply and solve the problem for you as soon as possible. Rounded and smooth corners can protect hands from scratches for easy installation and portability. Clear LED Display Lamp. Clear LED display lamp allows you to easily understand the status of the product for operation. This solar inverter is mainly used for power stations, schools, and home grid connections. Step 1: Install the inverter on the bracket of the photovoltaic panel with the screws. Step 2: Connect the positive and negative poles of the DC connection plug on the photovoltaic board to the DC input terminal of the inverter. Step 3: Open the. Cover of the AC output connector of the inverter and connect the AC cable to the AC. Step 4: Connect the AC output cable to the AC main cable. Step 5: Repeat steps 1 to 3, install and connect all inverters. Step 6: Connect the AC main cable to the utility grid to start your green energy journey. 1English User Notes Manual. All Accessories Needed for Installation. Please correctly install the inverter according to the instructions. If you have any questions, please contact the relevant personnel. T allowed to disassemble the machine. Only qualified maintenance personnel can repair the product. Please install the inverter in a place with low humidity and good ventilation to avoid overheating of the inverter, and remove flammable and explosive materials around. When using this product, children should not touch or play to avoid electric shock. Connect the solar panel and the DC input of the battery DC power supply cable. Our product is grid-connected power generation. The AC output port must be connected to the home grid to achieve grid-connected power generation. When using solar photovoltaic panels, the VOC voltage must be between 30-48V. It is recommended that the power configured for the solar panel be greater than 20% of the product power. When using the battery, it is recommended that the battery voltage be 36V, and three 12V batteries can be connected in series. When connecting the product, the positive and negative polarity shall not be reversed. For 300W products, the recommended parameter of the battery is 36V/10mah. For 600W products, it is recommended that the battery parameter be 36V/20mah. 1200W product: it is recommended that the battery parameter be 36V/40-45mah. The customer’s configuration parameters, input, and output voltages are within the normal voltage range of the product so that the product can work normally and realize grid-connected power generation. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement. Please make sure you do not mind before you order. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. Reverse Power Transmission, Pure Sine Wave, High-quality Material. Power 2 × 350W. Maximum Input DC Voltage. Peak Power Tracking Voltage. Maximum DC Short Circuit Current. Maximum Input Operating Current. Number of Circuit Connections Per String. Night Time Power Loss. EN61000-3-2 Safety Regulation EN62109. DIN VDE 1026 UL1741. 21.35.825cm/8.392.289.84in. 342411.5cm/13.389.444.52in. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “pengyizitwo” and is located in this country: US. This item can be shipped to United States.

Features: Reverse Power Transmission，Pure Sine Wave，High-quality Material
Brand: Unbranded
Color: Silver
Power Source: Solar
Type: Charger/Inverter
Model: XJ-WVC-700W
Application: Home/Garden
Voltage: 110V
Power: 700W
Current Rating: 22-50V
Current Type: DC
Resistance Properties: Waterproof
Current Output: 120V
Material: Aluminium Alloy
Plug Type: US Standard
Recommended Solar Panel: Power 2 × 350W
Maximum Input DC Voltage: 54V
Peak Power Tracking Voltage: 22-45V
Min/Max Start-up Voltage: 22-50V
Maximum DC Short Circuit Current: 40A
Maximum Input Operating Current: 30A
Output Peak Power: 700W
Rated Output Power: 650Watt
Rated Output Current: 6.36A
Rated Voltage Range: 80-160VAC
Rated Frequency Range: 57-62.5Hz
Power Factor: ＞99％
Number of Circuit Connections Per String: 6 (Single-phase)
Static MPPT Efficiency: 99.5%
Maximum Output Efficiency: 91.2%
Night Time Power Loss: <1W
Total Flow Distortion: <5%
Operating Temperature Range: – 40 ℃ to+60 ℃
Waterproof Rating: IP65
Cooling Method: Self-cooling
Electromagnetic Compatibility: EN50081.Part1 EN50082.Part1
Power Grid Disturbance: EN61000-3-2 Safety Regulation EN62109
Grid Detection: DIN VDE 1026 UL1741
Net Weight: 1.8kg/3.96lbs
Gross Weight: 2.45kg/5.4lbs
Product Size: 21.3*5.8*25cm/8.39*2.28*9.84in
Package Size: 34*24*11.5cm/13.38*9.44*4.52in

Category: 700w | Comments Off

April 21

1000W on Grid Tie Inverter MPPT Stackable Pure Sine Wave DC15-28V to AC90V-140V

1000W on Grid Tie Inverter MPPT Stackable Pure Sine Wave DC15-28V to AC90V-140V Output for 12V Solar Panel. 15.71 x 8.23 x 4.41 inches. 1KW for Voc 20-24V PV Panel. Power Inverters Range:Grid Tie Inverter MPPT Range 15.5-23V? DO NOT use solar controller load ports to connect to the inverter. This is On Grid. The AC output needs to be connected to the grid. Important Note: Vmp(of a solar panel) must be in the MPPT range to ensure the good output efficiency. Micro Grid Tie Inverter Doesn’t work with 12V battery? Each time you move the inverter, tighten the DC connection terminals. Avoid short circuit of DC terminal due to loose connection? 200W-1000W Solar Panel:Vmp: 18-21V, Voc: 20-24V? Please do not use other voltage input, for example: (10.8V-15V)and (25-30V)? The DC positive and negative connections are reversed, and the inverter Led will not light up. Powerful Cooling: Fan-cooled+aluminum shell, more better cooling function, smart and light (2.4 kg), easy to carry and handle. Multi-protection Function:Micro Inverter Max Power Point Tracking and Stackable, Island Protection. If the DC connection is loose and causes a short circuit, then smoke may be emitted. The inverter adopts aluminum alloy casing, so there is no fire. EpRec 1000W Grid Tie Inverter – System Requirements and Technical Specifications. Maximum AC Output Power. 200W or higher, Voc20-24V;Vmp18-21V. Grid Tie Inverter, Power cord US Plug, English user manual. Some buyers may have concerns about the output power not reach their expectations. Here is the reason. This unit was ideally designed for a 18V solar panel If using 12v battery as input, the inverter will not reach it’s max power point. We will suggest using 24v battery as input source to get a better output power. There’s always a loss in power in conversion from DC to AC. Also through Heat loss of energy. So if you’re expecting to get you’re 100 % out of the machine it won’t give you that. Solar panel has the loss too, so please don’t calculate the efficiency as inverter output power/solar panel specification. Because solar panel and invergter all have own efficiency. We offer the best prices around on high quality products. Our E-store includes media such as books, movies, music and games while offering electronics, toys, sporting apparel, clothing, tools, general home, garden items and more. We are always working hard to ensure your package arrives as soon as possible. We do not accept P. Please provide a physical address. We try our very best to make sure every customer is completely satisfied. If there’s a problem, message us! We’re happy to help. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “yemini4u” and is located in this country: US. This item can be shipped to United States.

Item Weight: 5.36 Pounds
Package Dimensions: 15.71 x 8.23 x 4.41 inches
Size: 1KW for Voc 20-24V PV Panel
Total Power Outlets: 1
Input Voltage: 12 Volts
Output Power: 1000 Watts
UPC: 7445041225235
EAN: 07445041225235

Category: 1000w | Comments Off

April 21

Micro Inverter MPPT Solar Grid Tie Inverter IP65 Waterproof For Solar Panel New

Micro Inverter MPPT Solar Grid Tie Inverter IP65 Waterproof For Solar Panel New. Solar Micro Inverter 600w Grid Tie Mppt Pure Sine Wave Dc to Waterproof. By Converting the Direct Current Generated by the Solar Panels into Alternating Current for Domestic Appliances, the Inverter Provides an Environmentally Friendly and Economical Source of Continuous Energy. The High-quality Aluminum Housing Provides a High Level of Protection, Ensuring Stable Operation and Long Service Life. Its Powerful Performance and High Safety Level Make It the Ideal Choice for Most Homes. 6-Stage Power Search: the Inverter Automatically Switches on the 6-Stage Power Search Function When the Output Current of the Solar Cells Is Extremely Low on Cloudy Days, Enabling a Constant, Stable and Efficient Power Output at Low Power Levels, Which Greatly Increases the Power Generation Capacity of the System. Direct Use: It Uses Solar Power Directly, so You Can Simply Connect the Solar Panels Directly to the Grid-connected Inverter to Get Ac Power Without Having to Connect the Batteries, Which Is Convenient and Energy Efficient. High Performance: It Has a Powerful Mppt (Maximum Power Point Tracking) Algorithm and Apl Function to Optimize the Power Collection from the Solar Panels While Making the Output Power More Stable. It Accurately Captures and Locks in the Maximum Output Power Point Even Under Fluctuations in Current Intensity, Resulting in a Significant Increase in Power Generation to Greater than 25%. Multiple Protection Functions: It Provides Six Protection Functions, over Temperature Protection, Under Voltage Alarm, Under Voltage Protection, over Voltage Protection, Short Circuit Protection and Overload Protection Functions, so You Can Use It with Confidence. Reliable Circuit System: the Product Has a Constant Current and Output Power, and Features Galvanic Isolation Technology to Provide a Fully Isolated Boost Circuit, Making the Circuit Safe and Reliable. In Addition, the Output Is Automatically Switched off When There Is an Obstruction in the Main Network. Stackable Installation : to Achieve Higher Power Requirements, It Allows Multiple Inverters to Be Stacked at Will to Form a Single-phase Parallel Stacking System, or It Can Be Easily Formed into a Three-phase System to Provide Three-phase Ac Power. Digital Control: It Adopts 32-Bit Dsp Fully Digital Spwm Control Technology, Featuring Strong Anti-interference Capability, Fast Computing Speed and High Intelligence to Improve Control Accuracy and Output Waveform Quality. Simple Maintenance&Installation : It Can Be Directly Installed on the Back of the Module or the Bracket. After Installation, It Is Easy to Maintain. You Only Need to Remove the Dust After a Long Time. Robust and Durable: the Housing Is Made of High-quality Aluminum Alloy, Which Is Robust, Wear-resistant, Rust-proof and Impact-resistant, Effectively Protecting the Internal Components and Extending Their Service Life. Reverse Power Transmission: the Power Is Transmitted in the Reverse Direction When in Grid-connected Output Mode, Automatically Detecting the Load in the Circuit and Giving Priority to Its Use, Making the Output More Efficient in Photovoltaic Power Generation Application Systems. Customer Service: We Aim to Provide Quality Products and Services. We Will Reply and Solve the Problem for You As Soon As Possible. Waterproof Cover: the Ac and Dc Interface Are Equipped with a Waterproof Cover to Prevent Dust and Water from Entering When Not in Use for a Longer Service Life. The Cover and the Interface Are Connected Together to Prevent Loss. Led Indicator : the Led Indicator on the Body Allows You to Control Its Operating Status Through Different Flashing Conditions. This Product Is Applicable to 30v or 36v Solar Panels, 36v Batteries. It Can Be Used in Residential and Small Commercial Environments. It Is Suitable for Various Household Appliances. Step 1: Install the Inverter on the Support of the Photovoltaic Panel with the Screws Provided by the Machine. Step 2: Connect the Positive and Negative Poles of the Dc Connection Plug on the Photovoltaic Panel to the Dc Input Terminal of the Inverter. Step 3: Open the Waterproof Cover of the Ac Output Interface of the Inverter and Connect the Ac Cable to the Ac Waterproof Plug. Step 4: Connect the Ac Output Cable to the Ac Main Cable. Step 5: Repeat Steps 1 to 3 to Install and Connect All Inverters. Step 6: Connect the Ac Main Cable to the Public Grid and Start Your Green Energy Journey. Power Source: Solar Powered. Maximum Input Power: 600watt. Recommend the Use of Pv Modules: 2x300w & Vmp>30v & Voc. Maximum Input Dc Voltage: 54v. Peak Power Tracking Voltage: 22-45v. Operating Voltage Range: 17- 50v. Min/Max Starting Voltage: 22- 50v. Maximum Dc Short-circuit: 40a. Maximum Input Operating Current: 27.2a. Peak Power Output: 600watt. Rated Output Power: 550watt. Rated Output Current: 4.58a. Rated Voltage Range: 80-160vac. Rated Frequency Range: 57-62.5hz. Max Unit per Branch Circuit: 6pcs (Single-phase). Static Mppt Efficiency: 99.5%. Maximum Output Efficiency: 91.2%. Night Time Power Consumption. Ambient Temperature Range: -40°C to + 60°C. Packing Size: 32229.5cm/12.598.663.74in. Product Size: 21.35.825cm/8.392.289.84in. Gross Weight: 2.45kg/5.4lbs. Net Weight: 1.6kg/3.52lbs. 1 Ac Connection Cable. 1 English User Notice Manual. 1 Chinese English Integrated Instruction. Other Accessories for Installation. Please Read the Operating Manual Completely Before Use. And Pay Particular Attention to the Safety Instructions Included. If Using Solar Pv Panels, It Is Important That the Voc Voltage Is Between 30-48v and It Is Recommended That the Solar Panel Configuration Is >20% of the Product’s Power. For Example, If the Product Is 600w, Then the Total Power of the Solar Panel Should Be Between 700-750w. If the Input Load Is a Battery, It Is Recommended That the Battery Voltage Is 36v, or 3 12v Batteries Can Be Connected in Series. Please Note That When Connecting the Product, the Positive and Negative Polarity Should Not Be Reversed. The Input and Output Voltage of the Configuration Is Within the Normal Operating Voltage Range of the Product in Order for the Product to Work Properly and Achieve Grid-connected Power Generation. Please Do Not Dismantle the Inverter by Non-specialists, Only Qualified Service Personnel Should Repair This Product. Please Install the Inverter in a Place with Low Humidity, Good Ventilation and Cool Places to Avoid Overheating the Inverter and Remove Flammable and Explosive Materials from the Surrounding Area. When Using This Product, Avoid Children Touching and Playing with It to Avoid Electric Shock. Please Allow the Slight Color Difference Caused by the Shooting Light and 1-3cm Error Due to Manual Measurement, and Make Sure You Do Not Mind Before You Order. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “best-all-the-time555″ and is located in this country: US. This item can be shipped to United States, Canada.

Brand: Unbranded
Material: Aluminum Alloy
Color: Silver
Power Source: Solar Powered
Maximum Input Power: 600Watt
Recommend the Use of PV Modules: 2x300W & Vmp>30V & Voc<50V
Maximum Input DC Voltage: 54V
Peak Power Tracking Voltage: 22-45V
Operating Voltage Range: 17- 50V
Min/Max Starting Voltage: 22- 50V
Maximum DC Short-circuit: 40A
Maximum Input Operating Current: 27.2A
Peak Power Output: 600Watt
Rated Output Power: 550Watt
Rated Output Current: 4.58A
Rated Voltage Range: 80-160VAC
Rated Frequency Range: 57-62.5Hz
Power Factor: >99%
Max Unit Per Branch Circuit: 6pcs (Single-phase)
Output Efficiency: @120V
Static MPPT Efficiency: 99.5%
Maximum Output Efficiency: 91.2%
Night Time Power Consumption: < 1W
THD: < 5%
Ambient Temperature Range: -40°C to + 60°C
Waterproof Rating: IP65
Cooling: Self-cooling
Packing Size: 32*22*9.5cm/12.59*8.66*3.74in
Product Size: 21.3*5.8*25cm/8.39*2.28*9.84in
Gross Weight: 2.45kg/5.4lbs
Net Weight: 1.6kg/3.52lbs
Type: Charger/Inverter
Current Type: AC

Category: micro | Comments Off

April 20

Solar Grid Tie Inverter 1000W DC24V 48V 72V AC110V AC220V Discharge Auto-Limit

Solar Grid Tie Inverter 1000W DC24V 48V 72V AC110V AC220V Discharge Auto-Limit. The product came very well packaged. I’m very happy. Thank you for everything. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “yossi-store” and is located in this country: CN. This item can be shipped worldwide.

Color: With Limiter
Input Voltage: PV 26-45V(24V BAT)
Output Voltage: 90-140Vac 50hz60hz
Brand: Unbranded
System Configuration: Grid-Tie
Current Type: DC

Category: solar | Comments Off

April 2023
M	T	W	T	F	S	S
« Mar				May »
					1	2
3	4	5	6	7	8	9
10	11	12	13	14	15	16
17	18	19	20	21	22	23
24	25	26	27	28	29	30