Grid Tie Power Inverter 1000W MPPT Pure Sine Wave DC10.8-30V Solar Input AC 220V. Directly connected to the solar panels (do not need to connect the battery). Using precise MPPT function, APL functions, the inverter automatically adjust the solar panels of maximum output powersimply connect the solar panel to the grid inverters. Do not need to connect the battery. AC 0 angle with high precision auto-detection AC phase angle of 0 through isolation amplifier then input to the MCU for high-precision detection and analysis. The phase shift rate is less than 1%, thus achieve high-precision with phase modulation AC output together. Synchronous High-frequency Modulation In the process of the grid, usually adapt the same phase angle in parallel. Ie, When the two-phase alternating current total is equal to 0. Use switch to combination the two AC fusion and the product is rectified AC half-frequency AC to 100Hz first, then the machine use the high frequency current in the circuit and semi-100Hz frequency alternating current generated combination, to achieve high-frequency modulation. Pure Sine Wave Output Use SPWM directly to make pure sine wave output. Automatic Sensing Function Solar Luminosity Use the latest luminosity perception operation technology. The different illuminate angle and intensity of the solar panel will produce different current output. Use advanced CPU to operate the different illuminance and the data can be directly displayed on the LCD. Then you can visually see the sense of the strength of the sun unit. Power Automatically Locked (APL) In different current fluctuations, we should use the MPPT function. When the MPPT function adjusted to the maximum power point, the product automatically powers locked in maximum power point, then made the output power more stable. Maximum Power Point Tracking (MPPT) Because the current intensity and the voltage changes at any time, if there is no power point tracking, there will be a lot of problems. In the past time, usually adopt a solar controller, but this product uses high-precision MPPT operation power, automatic and immediate adjust the solar panels output power at the maximum output point, then achieve a stable output purposes. Automatically Adapt To Different Load Power Factor Adapt to any of the power load. Constant Current, Constant Power This product is constant current, constant output power, without any overload, over-current phenomenon. Automatically Shut Down When The Power Output Of a Fault When the city power system is in failure, the inverter will automatically turn off the output. Current Limit Protection:Current limit 12. Stack Multiple Machines 13. Multiple small power inverters in parallel can achieve large output power. High-Frequency High Conversion Rate:Adapt high frequency converter, the output more efficient. Recommend Solar Panels: 1150w in total. DC max input power: 1100w. Vmp: 18-21V, Voc: 20-24V. Packing Size: 3116.55.5cm. Packing weight: 2.61 kgs. Packing: 1x grid tie inverter 1000w, 1x power cords, 1x manual. How to Install the grid tie inverter? HOW to Stackable the grid tie inverter? If you have higher power use requirements, this product can be stacked, such as: 2 grid tie inverter 1000W of stack used is equal to 2000W, 4pcs to have the 40000w. And there is No Quantitative Restrictions. Please be noted, This grid tie inverter cannot be used as off grid/stand alone solar system. The output need to be connected to the grid power. Can not supply power directly to the AC loads. DO NOT use solar controller load ports to connect to the inverter. DO NOT use the battery as the input power. My goal is to make sure you are happy and having the pleasant shopping with us. Yueqing Reliable Electric Is a leading company in the development, manufacturing and marketing of advanced power inverter and systems for mobile power markets and PV industry since 2009. The company’s power inverters convert and control raw electrical power from any renewable or back up ower source into high quality pure sine wave power. Our product range from off grid high frequency pure sine wave inverter (150W to 8000W) and grid tie inverter (200W to 2000W). Most of them are hot products in the market such as. High frequency pure sine wave inverter up to 8000w with stable performance, with LED and LCD display; 2. High advanced LCD display 2000w grid tie inverter with 45-90vdc input. Build-in dump load for small grid PV system 3. The highly compact designed micro inverter for 0.82kgs with power line carrier-current communication, it can built up a megawatt solar power station. Our pure sine wave inverters meet the needs of a wide range of application such as for vehicle, marine, train or any mobile power station. The special DC volt 36V, 72V, 96V, 110VDC ect can be selected for special application. The pure sine wave inverter products are certified to EMC testing in Australia and CE FCC, RoHS, approved. Reliable Electric is identified as one of the most famous trademarks in China for pure sine wave inverter for its relaible power inverter, reasonable price and responsible service. Reliable electric is committed to improving the environment and the renewable energy industry and continues to develop more efficient and cost-effective solutions to bring more green electricity to our lives. Any questions will be replied within 24 hours except the weekend and statuary holiday in Chinese Beijing Time. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “reliablepower” and is located in this country: CN. This item can be shipped worldwide.

• Current Rating: 1-5 A
• Model: Grid Tie Power Inverter
• Country/Region of Manufacture: China
• Wattage: 900-999 W
• Current Type: AC/DC
• System Configuration: Grid-Tie
• Power Source: Solar
• Type: Charger/Inverter
• Color: Silver
• MPN: Solar Power Inverter
• Recommended Environment: Indoor
• Power: 901-1000 W
• Current Output: 10 A or Less
• Brand: Unbranded
• Application: Agriculture/Farming, Back-up Power, Electronics, Home/Garden
• Charging Mode: MPPT (Maximum Power Point Tracking)
• Voltage: 21-30 V