Brand New Y&H Grid Tie Inverter 600W Stackable DCDC15-28V PV Input AC110V MPPT Pure Sine Wave Micro Inverter fit for 12V Solar Panel/24V Battery. Grid Tie Solar Inverter – Vmp(of a solar panel) must be in the MPPT range to ensure the good output efficiencyThe grid tie inverter generates heat during operation. It is recommended to install in a ventilated, dry, and cool place. If the local weather is very hot, a small fan can be used to dissipate heat from the inverter. Solar Grid Tie Inverter – Fit For 12V Solar Panel 21V(Voc) 18V (Vmp)Extension of solar panel cables. It is easy to cause the positive and negative connections to be reversed. The LED will not light up after connection. Solar Inverter – Max Power Point Tracking and Stackable, Island ProtectionThe Grid Tie inverter is equipped with banana plugs for easy connection. We have tested that the banana plugs are not firmly connected. The DC terminal will short-circuit. The instantaneous voltage will melt the DC column. AC Output Voltage: 90V-140V. Frequency Range: 48Hz 62Hz. Solar Panel Power: minimum 120W, maximum 650W. 1 x Power Cord. 1 x English User’s Manaul. Start DIY your solar system. Reduce your electricity bill. 600W Grid Tied Inverter, Pure Sine Wave Inverter. DC11V-32V to AC90-140V 50Hz/60Hz Auto. Fit For 12V Solar Panel 20V-24V (Voc);18V-21V (Vmp). Smart grid tie inverter is a compact unit, which directly converts direct current into alternating current for powering appliances and/or office equipments and connecting to utility grid. The AC output from Smart Micro inverter is synchronized and in phase with the utility grid. Please be noted, This grid tie inverter cannot be used as off grid/stand alone solar system. The output need to be connected to the grid power. Can not supply power directly to the AC loads. DO NOT use solar controller load ports to connect to the inverter. It will perfect compatible with 12V solar panels. Please note if using 12v battery as input source, output power will not be 100% if voltage less than 15V. We will suggest using 24v battery as input source to get a better output power. Use a battery to power the inverter, please use a circuit breaker. How to DIY Grid Tie Inverter Solar System? 1: Please check the power of your solar panel. The power cannot be lower than 120W. 2: Please check your solar panel voltage. Open circuit voltage 20-24V (Voc). 3: Note: Please use solar panels with the. Easy to install, DC connect your solar panel (red terminals connect “+”, black terminals connect “-“). Note 1: Do not connect the positive and negative poles. The LED will not light up. Note 2: Please tighten the DC end of the inverter. Avoid loosening and short circuits. The AC cord to the inverter 3 foot outlet, then the AC cord to home 3 pin AC outlet. The switch of the home outlet must be turned on. Note 1: The local power grid must be normal. In case of power failure, the inverter will automatically stop working (island protection). Note 2: The household outlet switch must be turned on. Otherwise, the inverter cannot be synchronized to the grid. The purpose is let small power inverter become high-power inverter. In order to achieve higher power use requirements, the use of this product can be stacked, such as: 4 grid tie inverter 600W of stack used is equal to 2400W, and the number of open stacks (No Quantitative Restrictions). Creative MPPT tech makes efficiency higher than 99%. Consider the conversion rate of solar panel is about 75-80%, and the Grid Tie Inverter is about 80-90%, for example, if you need 400W power output from the inverter, you need to connect it to a solar panel that 555W/0.8/0.9 equals about 555W (555w0.80.9=400W). Islanding; Short-circuit; converse connection; Low Voltage; Over Voltage; Over temperature Protection. Intelligence Fan-on temperature >45? For 12V Solar Panel Voc20-24V. For 24V Solar Panel Voc38-46V. AC connected to the grid. All our products are brand new and sealed. We take our reputation seriously. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “bookmarkdeals” and is located in this country: US. This item can be shipped to United States.
- MPN: GTI-600W-18V-110V-S
- Brand: Y&H
- Size: for 12V Solar Panel Voc20-24V
- Manufacturer Part Number: GTI-600W-18V-110V-S
