Cell Phones & Accessorie. LCD Display Touch Screen Digitizer Frame Assembly For LG Stylo 6 Stylo 5 Stylo 4. For Motorola Moto G Play 2021 LCD Display Touch Screen Digitizer Replace. Frame LCD Touch Screen Digitizer Assembly For Samsung Galaxy A10E A102 SM-A102U. For Samsung Galaxy Tab A 8.0 2019 SM-T295 T290 LCD Display Touch Screen Assembly. For Motorola Moto E5 Play XT1921-5 XT1921-2 LCD Touch Screen Display Digitizer. 1 set For Microsoft Surface Pro 4 LCD Screen Sticker Tape Adhesive Stripe Paper. 6.67 AMOLED LCD Touch Screen Display For OnePlus 7pro/7T Pro 2019 HD1925 GM1913. 2 PACK 9H HD Tempered GLASS Screen Protector Cover For iPhone 11 pro Max. Replacement Ear Speaker Earpiece For Samsung Galaxy S21 4G SM-G990 / 5G SM-G991. For Samsung Galaxy A52 5G Replacement Front Glass Screen Lens Outer with Tools. 400/600/700W Solar Grid Tie Micro Inverter DC18-50V Pure Sine Wave Inverter IP65. Precise maximum power point tracking. MPPT algorithm can optimize the power collection from solar panels. It accurately captures and collects sunlight, and locks in the maximum output power points, significantly increasing over 25% of the power generation. With the monitoring system, it can help you monitor the power generation efficiency of the power station and reduce workforce expenses. Reverse power transmission. With efficient reverse power transmission technology, the power transmission rate up to 99.9%. Full digital control can be achieved by using intelligent soft switching technology and built-in MCU for charging modules; Introducing high-frequency switching power supply and SPWM control technology. It features strong anti-interference ability, fast calculation speed, a high degree of intelligence, high control precision, and excellent output waveform. IP65 waterproof design and aluminum alloy material can effectively prevent rainwater erosion on the surface. It provides electrical isolation, more reliable to use. It offers multiple protection functions, such as over-current protection, short circuit protection, low-voltage protection, over high voltage protection. In order to satisfy higher power requirements, the solar micro inverter can be used in stacks, and the number of stacks is unlimited, which can form a single-phase parallel stack system. After the power station is installed, there is almost no need to do maintenance work. This solar power grid-tie micro-inverter is suitable for various household appliances. It can convert the DC power generated by solar panels into AC power available for household appliances. Our solar inverter provides sustainable energy and brings excellent environmental benefits. This is a Grid-Tie inverter, which means connecting the Grid power to the “AC output” would be necessary for Grid-tie power generation. Please check the voltage is 110V or 220V as well, different options according to the Grid voltage. If taking the solar panels as the input instead of batteries, “VOC” Voltage should be set in the range of 30-48V, the solar panels’ power is set 20% bigger than the inverter’s output power would be recommended. For the 600W inverter, the total solar panels’ total output power should be 700-750W. For the 1200W inverter, the total power should be 12001400W. If taking the battery packs as input, 36V battery packs would be firstly recommended, three 12V batteries are connecting in series to 36V would be fine. When wires the inverter, please follow the indication in the inverter, Pos (+) to Pos (+), Neg(-) to Neg (-). Regarding the battery’s capacity, 36V/10mah to 300W, 36V/20mah to the 600W inverter, and 36V/40-45mah to the 1200W inverter. Please check the configuration, input and output voltage are totally in the allowance, ensure the inverter could run normally and Grid to Grid generation. Please properly install the inverters and connnet the groud safety. Forbid openning the shell with non-professional person, only qualified maintenance person can repair the product. The inverter should be installed in the low humidity and well ventilated place. Please keep away from combustibles and children. Double check with the DC input and AC output when connect with PV. The Vmp and Voc of PV should be fuit for the prodcut for get output max. Specifications: Model:SG600MD Input(DC): Peak Power Tracking Volt Range: 24-40V Operating Volt Range: 18-50V Max. Input Volt: 50V DC Min/Max Start Volt: 18-50V Maximum Input Power: 2300W Maximum Dc Short Current: 212A. Operating Temperature Range:-40? Dimensions (L X W X H):185mm x 180mm x 38.5mm Net Weight:1.5KG Waterproof Level:IP65 Cooling:Self-cooling Communication Mode:2.4G Wireless Certificate:CE. Model: SG400MD Input(DC): Peak Power Tracking Volt Range: 24-40V Operating Volt Range: 18-50V Max. Input Volt: 50V DC Min/Max Start Volt: 18-50V Maximum Input Power: 2200W Maximum Dc Short Current: 28A. Model:SG700MD Input(DC): Peak Power Tracking Volt Range: 24-40V Operating Volt Range: 18-50V Max. Input Volt: 50V DC Min/Max Start Volt: 18-50V Maximum Input Power: 2350W Maximum Dc Short Current: 214A. Package: 1x Solar Grid Tie Micro Inverter. MPPT (Maximum Power Point Tracking). Before purchasing, please make sure that your address is correct. We don’t accecpt any return of physical damaged item by yourself. Your receive the wrong item. We will respond to you as soon as we can due to the time zone difference. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “8-50855″ and is located in this country: US. This item can be shipped to United States.

• Current: 400W
• Model: Grid Tie Inverter
• Working Voltage Range: 18V-50V
• Type: Charger/Inverter
• Brand: Y&H
• Country/Region of Manufacture: China
• System Configuration: Grid-Tie
• Maximum Input Voltage: 50V
• Power Source: Solar
• Charging Mode: MPPT (Maximum Power Point Tracking)
• AC Output: 110V or 230V
• Communication Method: 2.4G Wireless
• Frequency: 50Hz / 60Hz
• MPPT Voltage Range: 24V-40V
• Starting Voltage: 18V
• Waterproof Rating: IP65