May 16

SUN-600G Solar grid tie inverter 600W 10.8V-30V DC 110V AC

SUN-600G Solar grid tie inverter 600W 10.8V-30V DC 110V AC

SUN-600G Solar grid tie inverter 600W 10.8V-30V DC 110V AC
600W Small Grid Tie Power Inverter. This 600W micro grid tie inverter is designed specially for small power solar panel energy system. This inverter can directly connect solar panel, through inverter to home grid. Easy to installation, just need solar panel, grid tie inverter, then directly can put into home grid. Note: this inverter only has grid tie inverter function, do not have traditional inverter function, please do not connect. With the battery and the solar panel at the same time. Features MPPT (Maximum Power Point Tracking) allowing each solar panel to run at optimum output. Normal AC Output Power. Maximum AC Output Power. Total Harmonic Distortion(THD). 1, Connect the Solar Panels DC supply cables to the DC input terminal of the inverter, be sure that the polarity is correct. Recommended DC input cable size for maximum output is 8AWG or cables that can handle more than 30A. Optimal length would be less than 8m. Longer cables will experience higher voltage drop. The range of output power of Solar Panel is 40W600W. Connect the supplied AC power cord to the inverter and plug it to a home wall socket. 3, The 3 green LED indicators will start to cycle from left to right when the grid and DC supply is detected. This indicates the inverter is operating under normal condition. The rate of the cycling is according to how much power is being output from the solar panels. The more big output power is, the more fast the rate is. If there is no AC grid detected, the red LED will be on, the inverter will not put out power, this is called Island Protection. The individual system of SGPV (Small Grid Tie Photovoltaic System) is shown in the following Figure. Installing the solar panel of the SGPV at a suitable location that sunshine can irradiate on it, connecting the cables of the solar panel to the DC input terminals of the small grid tie inverter of the SGPV, inserting the plug of the inverter into the socket of the home grid. After this, when the sun shines, the SGPV will convert the solar energy to the home grid. Plug and play stack as many as you need. SGPV can be stackable, and all SGPVs are independent each other. The total power converting to the grid is the total power of all SGPVs. The installation of each SGPV is same. Connecting large quantity of SGPV. To the grid, this will construct high-power grid-tie system. Works great for solar panel 600 watts and under…. The item “SUN-600G Solar grid tie inverter 600W 10.8V-30V DC 110V AC” is in sale since Monday, August 28, 2017. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “hiparts” and is located in South San Francisco, California. This item can be shipped to United States.
  • Brand: LotFancy
  • MPN: SUN9018

SUN-600G Solar grid tie inverter 600W 10.8V-30V DC 110V AC
Category: sun-600g | Comments Off
May 16

SolarEdge SE10000A-US 10Kw 240v Grid-tie Solar Inverter Rapid Shutdown

SolarEdge SE10000A-US 10Kw 240v Grid-tie Solar Inverter Rapid Shutdown
SolarEdge SE10000A-US 10Kw 240v Grid-tie Solar Inverter Rapid Shutdown
SolarEdge SE10000A-US 10Kw 240v Grid-tie Solar Inverter Rapid Shutdown

SolarEdge SE10000A-US 10Kw 240v Grid-tie Solar Inverter Rapid Shutdown
(NEW – IN BOX) SolarEdge SE10000A-US 10Kw Single Phase Grid-tie Solar Inverter. 3 Unfused Input. Integrated Rapid Shutdown. RS485 and Ethernet. 25° C – 60° C. Dimensions (W x H x D). 30.5″ x 12.5″ x 10.5. Maximum DC Power (STC). Peak Power Tracking Voltage. 183 – 208 – 229 VAC 211 – 240 – 264 VAC. The SolarEdge DC-AC PV inverter is specifically designed to work with the SolarEdge power optimizers. Because MPPT and voltage management are handled separately for each module by the power optimizer, the inverter is only responsible for DC to AC inversion. A proprietary data monitoring receiver has been integrated into the single phase solar inverter and aggregates the power optimizer performance data from each PV module. This data can be transmitted to the web and accessed via the SolarEdge monitoring portal for performance analysis, fault detection and troubleshooting of PV systems. The SolarEdge PV inverter combines sophisticated digital control technology with efficient power conversion architecture to achieve superior solar power harvesting and best-in-class reliability. The fixed string voltage ensures operation at the highest efficiency at all times (98% weighted efficiency) independent of string length and temperature. The single phase inverter comes with a built-in DC switch, is lightweight and can be installed by a single person on a supplied bracket. Built-In Rapid Shutdown functionality for NEC 2014 690.12. Integrated arc fault protection (Type 1) for NEC 2011 690.11 compliance (part numbers ending in -U). Small, lightweight and easy to install on provided bracket. Built-in module-level monitoring receiver. Internet connection through Ethernet or Wireless via ZigBee. Outdoor and indoor installation – IP65/NEMA 3R. Fixed voltage inverter, DC/AC conversion only. Pre-assembled AC/DC Safety Switch for faster installation. Optional Built-in Revenue Grade Meter, ANSI C12.1. The item “SolarEdge SE10000A-US 10Kw 240v Grid-tie Solar Inverter Rapid Shutdown” is in sale since Saturday, May 12, 2018. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Solar Panels”. The seller is “surplus_solar_products” and is located in Smithtown, New York. This item can be shipped to United States.
  • Brand: SOLAREDGE
  • Type: Solar Inverter
  • Technology: SINGLE PHASE INVERTER-10 KW
  • MPN: SE10000A-USR00NNC2
  • Phase: Single Phase
  • Model: SE10000A-US-U
  • Wattage: 10000
  • Voltage: 240

SolarEdge SE10000A-US 10Kw 240v Grid-tie Solar Inverter Rapid Shutdown
Category: solaredge | Comments Off