NOTE : TWO INVERTERS are required for split phase operation, as well as a parallel kit for each inverter. (One inverter per phase). USA Stock is import duty free! Now supports Wifi remote monitoring on the www. Manuals can be found here. This is a listing for ONE Hybrid LV2424 3kVA 2400W 110/120V inverter , 80A MPPT solar charger, and built in 60A Utility charger to keep your batteries charged if the Sun is inadequate, or your batteries are just running low in the middle of the night. Runs on a 24VDC Battery bank. LiFePO4 + Lithium Ion support. Supports grid tie and off grid functionality not UL Listed. 1 2400 W Pure Sine wave output expandable up to 9 units (21.6 kW). 2 2kW MPPT Solar Charge controller. 3 60 A Utility Battery Charger In case your battery level falls below your setpoint. 4 UPS function, wire it to the Utility power, if battery power is too low, the system automatically switches the load to Utility power. 5 Single 120V 60Hz , Split phase (120V – 0 – 120V) and 3 phase capable (requires parralel board for each unit). 5.5 Grid Tie function (Anti Islanding, – Note: This inverter is NOT UL listed in the USA, for DIY enthusiast only, it is CE listed for European markets) – Send your excess power to slow your existing meter, once batteries are fully charged. If you need two units for split phase operation, see our split phase listing. This unit excludes the parallel module, whereas the other bundled listings includes it. This unit will operate just fine on its own for single phase 110V/120V, and is upgradable / stackable for future single / split phase or three phase operation. An excellent start to grow your installation, or if you just simply need one more inverter to add to your existing array. Stackable up to 9 units in any configuration up to 2.4kW x 9 = 21.6kW. 120V USA Models Comparison Sheet. After 1 year, offer spare part modules at reasonable pricing. Output Power in Watts (Pure Sine wave). Output Power in VA. Output Surge Capacity for 5 seconds. Output Voltage AC – Single Inverter Configuration. Output Voltage AC – Multiple Inverter Configuration. Single, 2 and 3 Phase. 1, Split 120/240V, 2 & 3 Ph. 1, Split, 2 & 3 Ph. Supports 50 and 60 Hz. Parallelable Daisy chain multiple units. Yes, 6 units-14.4kW max. Yes, 9 Units21.6 kW max. Yes- 3 Units 15kW max. Split Phase support (L1-120V , N, L2-120V) 240V / L1 & L2, 180 Deg. Yes, 2 or more units. Yes In Same unit. Two Phase Output 120V and 208V 120 Deg. Yes, 1 or more units. Three Phase Output 120V and 208V 120 Deg. Yes, 3 or more units. Optional Grid Feedback excess energy (Anti Islanding). Generator Dry Contact Relay Start / Stop / Alarm / User Def. MPPT Solar Input Voltage Range. MPPT Solar Input Max Voc(open circuit volts). MPPT Max Watts Solar Input. 8kW (4000W x 2). MPPT Max battery Charging Current. 160A (80A x 2). Min Battery Voltage for Solar Charging. Utility Max Charging Current. Utility + Solar max Current. Utility Bypass Max Current (Utility switched to Load). Communication Port, USB, RS232. Software Support (MAC, Windows 7-10, Linux). Wifi Communication Module compatible. Operating Temp F / C. Operating Humidity (Non Condensing). Net Weight lb / Kg. Dimensions in / cm. 3 Step Charging Algorithm (Bulk / Absorb/ Float). Lithium & LiFePO4 support (USER Mode). USER definable battery parameters. Absolute Min Cutoff Voltage. Min Cold Start Voltage. Max Charging Amps Solar + Utility. Absolute Minimum Batt Ah capacity. Recommended Min Batt Ah capacity. Energy Saving (Utility provides power as last priority). SOL – Solar 1st + Battery Assist 2nd , Utility Assist 3rd. UPS Mode (Solar and Battery only if no Utility). Utl – Utility 1st, Solar 2nd + Battery 3rd. Hybrid Energy & UPS mode Programmable battery Level. SbU Solar 1st + Battery 2nd /Level, Utility 3rd. CSO Solar 1st, Utility 2nd. Cut Utility 1st, Solar 2nd. SNU Solar + Utility together. Approximate battery Back-up Time (minutes). Load 500-VA (400W) with 100Ah Battery. Load 1000-VA (800W) with 100Ah Battery. Load 2000-VA (1600W) with 100Ah Battery. Load 3000-VA (2400W) with 100Ah Battery. Load 500-VA (400W) with 200Ah Battery. Load 1000-VA (800W) with 200Ah Battery. Load 2000-VA (1600W) with 200Ah Battery. Load 3000-VA (2400W) with 200Ah Battery. Load 500-VA (400W) with 400Ah Battery. Load 1000-VA (800W) with 400Ah Battery. Load 2000-VA (1600W) with 400Ah Battery. Load 3000-VA (2400W) with 400Ah Battery. The item “USA Support. Hybrid PIP LV2424 2400W 24V 120V/240V Inverter Split Phase(2 rqd)” is in sale since Monday, November 16, 2020. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “usa-mpp-solar” and is located in Mount Pleasant, Utah. This item can be shipped worldwide.
- Inverter Technology: Hybrid
- Model: Hybrid LV 2424
- Country/Region of Manufacture: Taiwan
- Wattage: 2400
- System Configuration: Grid-Tie
- Features: LCD Display
- Color: Green
- MPN: Hybrid LV 2424
- Recommended Environment: Indoor
- Protection Properties: Anti-Island Protection
- Brand: MPP SOLAR
- Voltage Output: 120V / 240Vac
- UPC: Does not apply
