October 13

3000W 24V Solar Hybrid Power Inverter 80A MPPT Charge Controller on/off Grid Tie

3000W-24V-Solar-Hybrid-Power-Inverter-80A-MPPT-Charge-Controller-on-off-Grid-Tie-01-ntlm 3000W 24V Solar Hybrid Power Inverter 80A MPPT Charge Controller on/off Grid Tie
3000W 24V Solar Hybrid Power Inverter 80A MPPT Charge Controller on/off Grid Tie
3000W 24V Solar Hybrid Power Inverter 80A MPPT Charge Controller on/off Grid Tie
3000W 24V Solar Hybrid Power Inverter 80A MPPT Charge Controller on/off Grid Tie
3000W 24V Solar Hybrid Power Inverter 80A MPPT Charge Controller on/off Grid Tie
3000W 24V Solar Hybrid Power Inverter 80A MPPT Charge Controller on/off Grid Tie

3000W 24V Solar Hybrid Power Inverter 80A MPPT Charge Controller on/off Grid Tie
3000W 24V Solar Hybrid Power Inverter 80A MPPT Charge Controller on/off Grid Tie PV System PH18-3024 PLUS. 3KW 24V High Frequency On/Off Grid Hybrid Solar Inverter. Pure Sine Wave Power Inverter. Parallel board optional. CE IEC approved. High Frequency on/off hybrid solar inverter. PH1800 PLUS SERIES (2KW-5KW). PH1800 Plus series hybrid solar inverter, it can realize self-consumption and feed-in to the grid from solar energy with best solution according to your setting. During the daytime solar power can run your home appliances and if there is extra solar power it will feed-in to the grid or you can choose to save them on the battery to backup when power failure or nighttime. Rated Power 2KW-5.5KW. Pure sine wave output. Self-consumption and Feed-in to the grid. Programmable supply priority for PV, Battery or Grid. User-adjustable battery charging current suits different types of batteries. Programmable multiple operation modes: Grid-tie, off-grid and grid-tie with backup. Multiple communication for USB, RS-485, Modbus. Monitoring software & Wifi Kit for real-time status display and control. Parallel operation up to 3 units. You can download this app on your cellphone and monitor the whole system, you will know know how much electricity the system generate and sell to utility. SERIES INTELLIGENT WORKING MODE. However, the PV energy system continues to operate during a grid outage. The batteries provide quiet, uninterrupted back-up power for loads such as refrigerators, lights, pumps, and computers, while your PV array continues to produce power and charge the batteries during the day. When the grid is restored, the inverter/chargers help recharge the batteries to their full state of charge while the grid powers all AC loads. Nominal Battery System Voltage. AC Voltage Regulation ï¼^ Batt. THD ï¼^ Linear loads ï¼? Inverter Efficiency ï¼^ Peak ï¼? 10ms(For PC) 20ms(For Other Home Appliance). 170280VAC(For Personal Computers), 90280VAC(For Home Appliances), 184253VAC(VDE4105). Maximum PV Array Open Circuit Voltage. PV Array MPPT Voltage Range. Maximum Solar Charge Current. Maximum AC Charge Current. Machine Dimensions (WHD)(mm). Net Weight ï¼^ Kg ï¼? Package Dimensions(WHD)(mm). Gross Weight ï¼^ Kg ï¼? 5% to 95% Relative Humidity (Non-condensing). This is 3000w 24v hybrid solar inverter (on/off grid) , If you need 5000w 48v inverter , please check this link. CE ROHS IEC Certification. Please do not choose a cheap power inverter. Low-cost power inverter use low-quality components, low efficiency, poor stability. Poor quality power inverter might damage the appliances, and even cause fires and explosions. Please select CE or other certified products. GAIA NEW ENERGY is your trusted partner for long term business. We arethe MANUFACUTER of the solar inverter. We are responsible forthe quality of the inverter. The inverter has 2 years. And service for the inverter the whole life. Brand new condition and work perfectly. All return items must be. In their original condition. With us for return address, details and any other issues. Without communication is a violation of feedback policy. Please leave us message if you have any question, we will reply in 24 hours, thank you! We reserve the right to cancel any order for any reason at any time. We are not responsible for undeliverable addresses. Orders are tracked and sent from China. Your feedback very important to us, after you get your package and you are. Satisfied with our service. If you have any problem with your order / any questions please before leave any type of feedback. Thank you for shopping at our store. The item “3000W 24V Solar Hybrid Power Inverter 80A MPPT Charge Controller on/off Grid Tie” is in sale since Wednesday, June 3, 2020. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “anita-likes” and is located in China. This item can be shipped to United States.
  • Manufacturer: manufacturer
  • Model: model
  • Brand: FIG
  • UPC: 726084482791
  • ISBN: Does not apply
  • EAN: Does not apply
  • MPN: Does not apply
  • is_customized: Yes
  • Floating Charge Voltage: 27.4VDC
  • Output Wave form: Pure Sine Wave
  • Brand Name: FIG
  • Weight: 9.5kg
  • Maximum PV Array Open Circuit Voltage: 145V
  • Maximum Solar Charge Current: 80A
  • PV Array MPPT Voltage Range: 30~130VDC
  • Model Number: PH18-3024-Plus
  • Output Type: Single
  • Output Voltage: 220VAC/230VAC/240VAC
  • Output Power: 1 – 200KW
  • Normal Voltage: 24V
  • Rated Power: 3000w
  • Overcharge Protection: 30V
  • Inverter Efficiency: 93%
  • Type: DC/AC Inverters
  • Output Current: 13A
  • Output Frequency: 50hz 60hz auto
  • Size: 272*355*100mm

3000W 24V Solar Hybrid Power Inverter 80A MPPT Charge Controller on/off Grid Tie
Category: 3000w | Comments Off
December 15

2 IN 1 ON/OFF 1200W Grid Tie Power Inverter DC 28V-48V To AC 110V (28-48V Solar)

2 IN 1 ON/OFF 1200W Grid Tie Power Inverter DC 28V-48V To AC 110V (28-48V Solar)
2 IN 1 ON/OFF 1200W Grid Tie Power Inverter DC 28V-48V To AC 110V (28-48V Solar)
2 IN 1 ON/OFF 1200W Grid Tie Power Inverter DC 28V-48V To AC 110V (28-48V Solar)
2 IN 1 ON/OFF 1200W Grid Tie Power Inverter DC 28V-48V To AC 110V (28-48V Solar)
2 IN 1 ON/OFF 1200W Grid Tie Power Inverter DC 28V-48V To AC 110V (28-48V Solar)
2 IN 1 ON/OFF 1200W Grid Tie Power Inverter DC 28V-48V To AC 110V (28-48V Solar)

2 IN 1 ON/OFF 1200W Grid Tie Power Inverter DC 28V-48V To AC 110V (28-48V Solar)
2 IN 1 ON/OFF 1200W Grid Tie Power Inverter DC 28V-48V To AC 110V (28-48V Solar). With 3.5 LCD Meter & Solar Panel MPPT Function. With LCD Meter Charger For 24V(36V VMP) Solar Panel. 50A/24V, 1200W Solar Controller. Please note that this is presale item, we can only send it out on around 15th. A lof of people are using off grid system, means put solar battery to your battery bank, then take the power to using it, this is good idea, however. What happened if your battery bank is full of charge, what happened now for the new solar engery, just let become heat & waste it? You already know need using green energy to protect the earth, but why you waste the green power for not easy to get it(you need hour by hour to get it)why you just let it go? Need cost you another usd200, also 2-3years, you need upgrade your battery, is it smart way? A lof of customers asking what should i do, yes, we hear your voice, now we give you 2 in 1 on/off grid inverter, this will let your green power to battery first, until the battery is full will go to float charging, in this moment, the smart inverter will auto switch to on grid mode, that’s 27.5v, in this moment, your battery already 80% full, as some battery is hard to get more than 80%, in this moment, no need waste power to keep charge your battery, so directly switch to on grid mode. When the battery voltage done to 26.5v, will switch back to off grid mode. This is including 2PCS LCD 3.5 big display, one is showing your solar panel & battery situations. SOLAR OFF/ BTY ON. (this page will clear show you the solar connecting situations). SOLAR ON/ BTY ON. Can clear tell you the solar is correct to connect & battery is on charging. WATT : (will show you how many solar panel coming in). VOLTAGE: (will show you the voltage for your solar panel, laoding voltage). AMP : (will show you how many amp coming into the battery). VOLTAGE : (will show you battery voltage). Capacity : (this you need enter your battery size by your self). Charge tme/F : charge time for full, tell you how long your battery can be full. Total energy: xxx KWH. SET BTY: setting your battery size. SET ETC: setting electricity bill. SET DEL: delete all your total energy & cost. Your solar panel is over voltage. Your battery is low voltage. This has 50A/24V, 1200W SOLAR CONTROLLER on the inverter. INPUT VOLTAGE: 28-48V(For solar panel no load). On grid voltage auto switch: over 27.5v(for your battery). Off grid voltage auto switch: under 26.5v(for your battery). Low battery voltage shut down: 21.5v(for dc output). Auto turn on voltage : 24v(for dc output). Pls make sure you total understand this 2 in 1 function, tks. Difference Between Grid Tie Inverter And Grid Tie Inverter With LCD Meter(2015 version). The LCD meter’s watts is 10000w, it can measure your whole appliance, long time to use and hard to damage. Cooling area is larger 30% than old version, tempreture and fan protection hard to run, can save the power of solar panel, so inverter can use best efficieny. It will bring your life covenient, take you to a green world and enjoy freely! Inverter has mppt function, LED light has different display when inverter is low voltage, working voltage, high voltage. User can know the power states of solar panel through LCD meter as watts, voltage, amps and so on, it’s really a smart inverter. AC Output watt :0 Watt (Max display power 15KWcan display running power less than 1W). AC Output Volt : 0 volt (Max display volt 270V). AC Output Amp : 0 Amp (Max display amp 55A). Total Operation time :0-60000 hoursOperation time: 059 minutes to 24 hours to 2500 days. Electricity consumption: 01000000 kwh. Total operation time , electricity consumption and electricity cost can clear. Can set up power , the meter will alarm when reach reserve power. Can set up the cost. Refresh rate: one time 0.5 seconds. Advantage For Grid Tie Power Inverter. Grid tie inverter is designed for small solar panel energy market, it’s suitable for family enengy system. 14V-24V grid tie inverter suitable for 12v solar panel which rated volt Vmp is about 18V. 28V-48V grid tie inverter suitable for 24v solar panel which rated volt Vmp is about 36V. 52V-88V grid tie inverter suitable for 48v solar panel which rated volt Vmp is about 72V. 102V-158V grid tie inverter suitable for 96v solar panel which rated volt Vmp is about 144V. Do not suitable for wind turbine, pls do not connect wind turbine for the DC source. This inverter can directly use solar panel through inverter to home grid. Easy to installation, just need solar panel, grid tie inverter, then directly can put into home grid. This inverter only has grid tie inverter function, do not have tranditional inverter function, pls do not connect the battery for dc source, for further questions, pls leave message to ask, tks. The inverter are designed for solar panels energy directly , no need battery! For battery, 24v for dc 14-24v inverter ; 36v for dc 28-48v inverter ;72v for dc 52-88v inverter ; 144v for dc 102-158v inverter ;But please do NOT hook these the inverter to battery banks for a long time , it will burn the inverter up over a period of time. If you want to connect with wind turbine , need connect with a dump load controller 12v for dc 14-24v inverter ; 24v for dc 28-48v inverter ; 36v for dc 52-88v inverter ; 72v for dc 102-158v inverter. This kind micro grid tie inverter, at the beginning its output will go up, but when the inverter inside is hot and temperature is too high, the fan will work, the inverter’s output will reduce or stop work for some seconds, after the inverter become cool, it will auto work again, and its output will go up. Separate the position of Red and Black terminal, would not cause short circuit easy. There are one big ball type fan. Speed is equal to CPU’s 2 times. Life time is CPU’s 5 times. Old version is SMT parts, easy drop. 2015 version is DIP, not easy drop and with long life time. 2015 version have 2 group capacity , total 12 pcs , low impedance. Filter is more effective, heating temperature is lower 15 degree than old version. Old version adopts current and voltage control IC, instability. Microchip from USA, it is very. Reaction speed is 10 times faster, 100 times high precision. Double protect for AC when over voltage, island reaction, and voltage spike. It will protect the inverter quickly when city power instability. Old version: turn off the switch, the vestigial current and voltage in DC side may damage the ac mosfets. 2015 new version: when turn off the switch, it will turn off both Ac and Dc side, cut off IC signal, would not damage the mosfet. When input power have 600w , the efficiency can reach to 90% , fan would not work , high efficiency will lead inside not to fever, can save solar power; when input power reach 1200w , the efficiency will keep on 87.5%. 2015 new version only have 1 bi-color light. Low voltage: red light flash, inverter no work. High voltage: green light always on, inverter no work. Normal work situation: green light flash, higher watt flash faster. For this design you are very clear to know where is the problem if the inverter not work, very easy to know if from your solar panel or inverter. Sometimes, if you are using some heavy appliance like motor, enginee, cause the voltage up down very fast, in this moment, big amp will come into the grid tie inverter, easy to cause the ac mos burned, so surge protector will cut down by itself to protect the grid tie inverter. You may have experience, when meet the big lightning, the power source of the home appliance may damage, same reason, will also cause the inverter damage, in this moment, the lightining protection can release thousand voltage to protect the inverter not damage. High speed AC fuse. We now provide access to the ac fuse from the outside of the inverter. Each inverter will come our special ac fuse. This will protect the inverter in less than a millisecond to help prevent high voltage. Spikes from feeding back into the circuitry! Operating Principle For Grid Tie Power Inverter? When you use solar panel through grid tie inverter, your home power meter will reduce the speed(if you are using other electric appliances), or your home power meter will backward(if you are not use any appliances). The inverter can be connected to any outlet at home, when this line run by the conventional electric network. The inverter IC will monitors the volume, frequency and phase of the home grid, then produce a pure sine wave that the frequency and phase will be match the grid’s, and the volume will be higher than the grid’s, then according to our current controlled PWM, to control the output power to the grid. The inverter will puts out power when the home grid is on. Traditional grid tie inverter is the solar panel are connect in series, so if one solar panel did not work or bad efficiency, then the whole system will be effects, but power jack grid tie inverter, you can use every inverter in parallel, in this moment, each inverter has it’s own MPPT, can make every solar panel got the max power. Our grid tie inverter has 1 green light, when the charge fucntion is normal, then this green light will turn on, but if there are not dc sources(like in the night, no sun shine or raining day), the red led light will turn on, the inverter will stop to work, in this moment, the inverter will close the door, the home grid power will not back to inverter. When you set up the grid tie inverter. Pls put the AC plug first. After plug into the home ac source. Dont remove the plug anymore. Otherwise it may have hight voltage spikes. Then connect the DC input. When you want remove the grid tie inverter. Please take away the DC input first. Then you can remove the AC plug. Accessary: will including the AC power cord, DC cable will not including! Fast, Reliably and Directly!! Website for ref is. International Buyers Please Note. If you are satisfied with our product and service, pls kindly leave full stars good feedback for us. The item “2 IN 1 ON/OFF 1200W Grid Tie Power Inverter DC 28V-48V To AC 110V (28-48V Solar)” is in sale since Wednesday, November 01, 2017. This item is in the category “Consumer Electronics\Vehicle Electronics & GPS\Car Electronics Accessories\Power Inverters”. The seller is “dr.powerjack” and is located in CA. This item can be shipped to United States.
  • Brand: Power Jack
  • Type: Pure Sine Inverter
  • Output Voltage: 110V
  • Features: DC/AC
  • MPN: PSWGT-1200-28-110

2 IN 1 ON/OFF 1200W Grid Tie Power Inverter DC 28V-48V To AC 110V (28-48V Solar)
Category: onoff | Comments Off
November 13

2 IN 1 ON/OFF 1200W Grid Tie Power Inverter DC 28V-48V To AC 110V (28-48V Solar)

2 IN 1 ON/OFF 1200W Grid Tie Power Inverter DC 28V-48V To AC 110V (28-48V Solar)
2 IN 1 ON/OFF 1200W Grid Tie Power Inverter DC 28V-48V To AC 110V (28-48V Solar)
2 IN 1 ON/OFF 1200W Grid Tie Power Inverter DC 28V-48V To AC 110V (28-48V Solar)
2 IN 1 ON/OFF 1200W Grid Tie Power Inverter DC 28V-48V To AC 110V (28-48V Solar)
2 IN 1 ON/OFF 1200W Grid Tie Power Inverter DC 28V-48V To AC 110V (28-48V Solar)
2 IN 1 ON/OFF 1200W Grid Tie Power Inverter DC 28V-48V To AC 110V (28-48V Solar)

2 IN 1 ON/OFF 1200W Grid Tie Power Inverter DC 28V-48V To AC 110V (28-48V Solar)
2015 Version With 3.5 LCD Meter & Solar Panel MPPT Function. 1200 Watt Pure Sine Wave Grid Tie Power Inverter. 28V-48V DC Input 95V-130V AC Output 60Hz Frequency. With LCD Meter Charger For 24V(36V VMP) Solar Panel. 50A/24V, 1200W Solar Controller. A lof of people are using off grid system, means put solar battery to your battery bank, then take the power to using it, this is good idea, however what happened if your battery bank is full of charge, what happened now for the new solar engery, just let become heat & waste it? You already know need using green energy to protect the earth, but why you waste the green power for not easy to get it(you need hour by hour to get it)why you just let it go? A lof of customers asking what should i do, yes, we hear your voice, now we give you 2 in 1 on/off grid inverter, this will let your green power to battery first, until the battery is full will go to float charging, in this moment, the smart inverter will auto switch to on grid mode, that’s 27.5v, in this moment, your battery already 80% full, as some battery is hard to get more than 80%, in this moment, no need waste power to keep charge your battery, so directly switch to on grid mode. When the battery voltage done to 26.5v, will switch back to off grid mode. This is including 2PCS LCD 3.5 big display, one is showing your solar panel & battery situations. SOLAR OFF/ BTY ON. (this page will clear show you the solar connecting situations). SOLAR ON/ BTY ON. Can clear tell you the solar is correct to connect & battery is on charging. WATT : (will show you how many solar panel coming in). VOLTAGE: (will show you the voltage for your solar panel, laoding voltage). AMP : (will show you how many amp coming into the battery). VOLTAGE : (will show you battery voltage). Capacity : (this you need enter your battery size by your self). Charge tme/F : charge time for full, tell you how long your battery can be full. Total energy: xxx KWH. SET BTY: setting your battery size. SET ETC: setting electricity bill. SET DEL: delete all your total energy & cost. Your solar panel is over voltage. Your battery is low voltage. This has 50A/24V, 1200W SOLAR CONTROLLER on the inverter. INPUT VOLTAGE: 28-48V(For solar panel no load). On grid voltage auto switch: over 27.5v(for your battery). Off grid voltage auto switch: under 26.5v(for your battery). Low battery voltage shut down: 21.5v(for dc output). Auto turn on voltage : 24v(for dc output). Pls make sure you total understand this 2 in 1 function, tks. Difference Between Grid Tie Inverter And Grid Tie Inverter With LCD Meter(2015 version). The LCD meter’s watts is 10000w, it can measure your whole appliance, long time to use and hard to damage. Cooling area is larger 30% than old version, tempreture and fan protection hard to run, can save the power of solar panel, so inverter can use best efficieny. It will bring your life covenient, take you to a green world and enjoy freely! Inverter has mppt function, LED light has different display when inverter is low voltage, working voltage, high voltage. User can know the power states of solar panel through LCD meter as watts, voltage, amps and so on, it’s really a smart inverter. AC Output watt :0 Watt (Max display power 15KWcan display running power less than 1W). AC Output Volt : 0 volt (Max display volt 270V). AC Output Amp : 0 Amp (Max display amp 55A). Total Operation time :0-60000 hoursOperation time: 059 minutes to 24 hours to 2500 days. Electricity consumption: 01000000 kwh. Total operation time , electricity consumption and electricity cost can clear. Can set up power , the meter will alarm when reach reserve power. Can set up the cost. Refresh rate: one time 0.5 seconds. Advantage For Grid Tie. Grid tie inverter is designed for small solar panel energy market, it’s suitable for family enengy system. 14V-24V grid tie inverter suitable for 12v solar panel which rated volt Vmp is about 18V. 28V-48V grid tie inverter suitable for 24v solar panel which rated volt Vmp is about 36V. 52V-88V grid tie inverter suitable for 48v solar panel which rated volt Vmp is about 72V. 102V-158V grid tie inverter suitable for 96v solar panel which rated volt Vmp is about 144V. Do not suitable for wind turbine, pls do not connect wind turbine for the DC source. This inverter can directly use solar panel through inverter to home grid. Easy to installation, just need solar panel, grid tie inverter, then directly can put into home grid. This inverter only has grid tie inverter function, do not have tranditional inverter function, pls do not connect the battery for 12v dc source, for further questions, pls leave message to ask, tks. The inverter are designed for solar panels energy directly , no need battery! For battery, 24v for dc 14-24v inverter ; 36v for dc 28-48v inverter ;72v for dc 52-88v inverter ; 144v for dc 102-158v inverter ;But please do NOT hook these the inverter to battery banks for a long time , it will burn the inverter up over a period of time. If you want to connect with wind turbine , need connect with a dump load controller 12v for dc 14-24v inverter ; 24v for dc 28-48v inverter ; 36v for dc 52-88v inverter ; 72v for dc 102-158v inverter. This kind micro grid tie inverter, at the beginning its output will go up, but when the inverter inside is hot and temperature is too high, the fan will work, the inverter’s output will reduce or stop work for some seconds, after the inverter become cool, it will auto work again, and its output will go up. Separate the position of Red and Black terminal, would not cause short circuit easy. There are one big ball type fan. Speed is equal to CPU’s 2 times. Life time is CPU’s 5 times. Old version is SMT parts, easy drop. 2015 version is DIP, not easy drop and with long life time. 2015 version have 2 group capacity , total 12 pcs , low impedance. Filter is more effective, heating temperature is lower 15 degree than old version. Old version adopts current and voltage control IC, instability. Microchip from USA, it is very. Reaction speed is 10 times faster, 100 times high precision. Double protect for AC when over voltage, island reaction, and voltage spike. It will protect the inverter quickly when city power instability. Old version: turn off the switch, the vestigial current and voltage in DC side may damage the ac mosfets. 2015 new version: when turn off the switch, it will turn off both Ac and Dc side, cut off IC signal, would not damage the mosfet. When input power have 600w , the efficiency can reach to 90% , fan would not work , high efficiency will lead inside not to fever, can save solar power; when input power reach 1200w , the efficiency will keep on 87.5%. 2015 new version only have 1 bi-color light. Low voltage: red light flash, inverter no work. High voltage: green light always on, inverter no work. Normal work situation: green light flash, higher watt flash faster. For this design you are very clear to know where is the problem if the inverter not work, very easy to know if from your solar panel or inverter. Sometimes, if you are using some heavy appliance like motor, enginee, cause the voltage up down very fast, in this moment, big amp will come into the grid tie inverter, easy to cause the ac mos burned, so surge protector will cut down by itself to protect the grid tie inverter. You may have experience, when meet the big lightning, the power source of the home appliance may damage, same reason, will also cause the inverter damage, in this moment, the lightining protection can release thousand voltage to protect the inverter not damage. High speed AC fuse. We now provide access to the ac fuse from the outside of the inverter. Each inverter will come our special ac fuse. This will protect the inverter in less than a millisecond to help prevent high voltage. Spikes from feeding back into the circuitry! Grid Tie Power Inverter? When you use solar panel through grid tie inverter, your home power meter will reduce the speed(if you are using other electric appliances), or your home power meter will backward(if you are not use any appliances). The inverter can be connected to any outlet at home, when this line run by the conventional electric network. The inverter IC will monitors the volume, frequency and phase of the home grid, then produce a pure sine wave that the frequency and phase will be match the grid’s, and the volume will be higher than the grid’s, then according to our current controlled PWM, to control the output power to the grid. The inverter will puts out power when the home grid is on. Traditional grid tie inverter is the solar panel are connect in series, so if one solar panel did not work or bad efficiency, then the whole system will be effects, but power jack grid tie inverter, you can use every inverter in parallel, in this moment, each inverter has it’s own MPPT, can make every solar panel got the max power. Our grid tie inverter has 3greens light, when the charge fucntion is normal, then this 3lights will turn on, but if there are not dc sources(like in the night, no sun shine or raining day), the red led light will turn on, the inverter will stop to work, in this moment, the inverter will close the door, the home grid power will not back to inverter. When you set up the grid tie inverter. Pls put the AC plug first. After plug into the home ac source. Dont remove the plug anymore. Otherwise it may have hight voltage spikes. Then connect the DC input. When you want remove the grid tie inverter. Please take away the DC input first. Then you can remove the AC plug. Accessary: will including the AC power cord, DC cable will not including! Fast, Reliably and Directly!! International Buyers Please Note. The item “2 IN 1 ON/OFF 1200W Grid Tie Power Inverter DC 28V-48V To AC 110V (28-48V Solar)” is in sale since Wednesday, July 22, 2015. This item is in the category “Consumer Electronics\Vehicle Electronics & GPS\Car Electronics Accessories\Power Inverters”. The seller is “powerenergyworld” and is located in USA. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Russian federation, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.
  • Brand: Unbranded/Generic
  • MPN: Does Not Apply
  • UPC: Does Not Apply

2 IN 1 ON/OFF 1200W Grid Tie Power Inverter DC 28V-48V To AC 110V (28-48V Solar)
Category: onoff | Comments Off
October 28

2 IN 1 ON/OFF 1200W Grid Tie Inverter DC 28V-48V To AC 110V (28-48V Solar Panel)

2 IN 1 ON/OFF 1200W Grid Tie Inverter DC 28V-48V To AC 110V (28-48V Solar Panel)
2 IN 1 ON/OFF 1200W Grid Tie Inverter DC 28V-48V To AC 110V (28-48V Solar Panel)
2 IN 1 ON/OFF 1200W Grid Tie Inverter DC 28V-48V To AC 110V (28-48V Solar Panel)
2 IN 1 ON/OFF 1200W Grid Tie Inverter DC 28V-48V To AC 110V (28-48V Solar Panel)
2 IN 1 ON/OFF 1200W Grid Tie Inverter DC 28V-48V To AC 110V (28-48V Solar Panel)
2 IN 1 ON/OFF 1200W Grid Tie Inverter DC 28V-48V To AC 110V (28-48V Solar Panel)
2 IN 1 ON/OFF 1200W Grid Tie Inverter DC 28V-48V To AC 110V (28-48V Solar Panel)
2 IN 1 ON/OFF 1200W Grid Tie Inverter DC 28V-48V To AC 110V (28-48V Solar Panel)

2 IN 1 ON/OFF 1200W Grid Tie Inverter DC 28V-48V To AC 110V (28-48V Solar Panel)
2 IN 1 ON/OFF. 1200 Watt Pure Sine Wave Grid Tie Power Inverter. 28V-48V DC Input 9. 50Hz & 60Hz Frequency. With 3.5 LCD Meter & Solar Panel MPPT Function. 50A/24V, 1200W Solar Controller. Charger For 24V(36V VMP) Solar Panel. A lof of people are using off grid system, means put solar battery to your battery bank, then take the power to using it, this is good idea, however what happened if your battery bank is full of charge, what happened now for the new solar engery, just let become heat & waste it? You already know need using green energy to protect the earth, but why you waste the green power for not easy to get it(you need hour by hour to get it)why you just let it go? A lof of customers asking what should i do, yes, we hear your voice, now we give you 2 in 1 on/off grid inverter, this will let your green power to battery first, until the battery is full will go to float charging, in this moment, the smart inverter will auto switch to on grid mode, that’s 27.5v, in this moment, your battery already 80% full, as some battery is hard to get more than 80%, in this moment, no need waste power to keep charge your battery, so directly switch to on grid mode. When the battery voltage done to 26.5v, will switch back to off grid mode. This is including 2PCS LCD 3.5 big display, one is showing your solar panel & battery situations. SOLAR OFF/ BTY ON. (this page will clear show you the solar connecting situations). SOLAR ON/ BTY ON. Can clear tell you the solar is correct to connect & battery is on charging. WATT : (will show you how many solar panel coming in). VOLTAGE: (will show you the voltage for your solar panel, laoding voltage). AMP : (will show you how many amp coming into the battery). VOLTAGE : (will show you battery voltage). Capacity : (this you need enter your battery size by your self). Charge tme/F : charge time for full, tell you how long your battery can be full. Total energy: xxx KWH. SET BTY: setting your battery size. SET ETC: setting electricity bill. SET DEL: delete all your total energy & cost. Your solar panel is over voltage. Your battery is low voltage. This has 50A/24V, 1200W SOLAR CONTROLLER on the inverter. INPUT VOLTAGE: 28-48V(For solar panel no load). On grid voltage auto switch: over 27.5v(for your battery). Off grid voltage auto switch: under 26.5v(for your battery). Low battery voltage shut down: 21.5v(for dc output). Auto turn on voltage : 24v(for dc output). Pls make sure you total understand this 2 in 1 function, tks. Difference Between Grid Tie Inverter And Grid Tie Inverter With LCD Meter(2015 version). The LCD meter’s watts is 10000w, it can measure your whole appliance, long time to use and hard to damage. Cooling area is larger 30% than old version, tempreture and fan protection hard to run, can save the power of solar panel, so inverter can use best efficieny. It will bring your life covenient, take you to a green world and enjoy freely! Inverter has mppt function, LED light has different display when inverter is low voltage, working voltage, high voltage. User can know the power states of solar panel through LCD meter as watts, voltage, amps and so on, it’s really a smart inverter. AC Output watt :0 Watt (Max display power 15KWcan display running power less than 1W). AC Output Volt : 0 volt (Max display volt 270V). AC Output Amp : 0 Amp (Max display amp 55A). Total Operation time :0-60000 hoursOperation time: 059 minutes to 24 hours to 2500 days. Electricity consumption: 01000000 kwh. Total operation time , electricity consumption and electricity cost can clear. Can set up power , the meter will alarm when reach reserve power. Can set up the cost. Refresh rate: one time 0.5 seconds. Advantage For Grid Tie Power Inverter. Grid tie inverter is designed for small solar panel energy market, it’s suitable for family enengy system. 14V-24V grid tie inverter suitable for 12v solar panel which rated volt Vmp is about 18V. 28V-48V grid tie inverter suitable for 24v solar panel which rated volt Vmp is about 36V. 52V-88V grid tie inverter suitable for 48v solar panel which rated volt Vmp is about 72V. 102V-158V grid tie inverter suitable for 96v solar panel which rated volt Vmp is about 144V. Do not suitable for wind turbine, pls do not connect wind turbine for the DC source. This inverter can directly use solar panel through inverter to home grid. Easy to installation, just need solar panel, grid tie inverter, then directly can put into home grid. This inverter only has grid tie inverter function, do not have tranditional inverter function, pls do not connect the battery for dc source, for further questions, pls leave message to ask, tks. The inverter are designed for solar panels energy directly , no need battery! For battery, 24v for dc 14-24v inverter ; 36v for dc 28-48v inverter ;72v for dc 52-88v inverter ; 144v for dc 102-158v inverter ;But please do NOT hook these the inverter to battery banks for a long time , it will burn the inverter up over a period of time. If you want to connect with wind turbine , need connect with a dump load controller 12v for dc 14-24v inverter ; 24v for dc 28-48v inverter ; 36v for dc 52-88v inverter ; 72v for dc 102-158v inverter. This kind micro grid tie inverter, at the beginning its output will go up, but when the inverter inside is hot and temperature is too high, the fan will work, the inverter’s output will reduce or stop work for some seconds, after the inverter become cool, it will auto work again, and its output will go up. Separate the position of Red and Black terminal, would not cause short circuit easy. There are one big ball type fan. Speed is equal to CPU’s 2 times. Life time is CPU’s 5 times. Old version is SMT parts, easy drop. 2015 version is DIP, not easy drop and with long life time. 2015 version have 2 group capacity , total 12 pcs , low impedance. Filter is more effective, heating temperature is lower 15 degree than old version. Old version adopts current and voltage control IC, instability. Microchip from USA, it is very. Reaction speed is 10 times faster, 100 times high precision. Double protect for AC when over voltage, island reaction, and voltage spike. It will protect the inverter quickly when city power instability. Old version: turn off the switch, the vestigial current and voltage in DC side may damage the ac mosfets. 2015 new version: when turn off the switch, it will turn off both Ac and Dc side, cut off IC signal, would not damage the mosfet. When input power have 600w , the efficiency can reach to 90% , fan would not work , high efficiency will lead inside not to fever, can save solar power; when input power reach 1200w , the efficiency will keep on 87.5%. 2015 new version only have 1 bi-color light. Low voltage: red light flash, inverter no work. High voltage: green light always on, inverter no work. Normal work situation: green light flash, higher watt flash faster. For this design you are very clear to know where is the problem if the inverter not work, very easy to know if from your solar panel or inverter. Sometimes, if you are using some heavy appliance like motor, enginee, cause the voltage up down very fast, in this moment, big amp will come into the grid tie inverter, easy to cause the ac mos burned, so surge protector will cut down by itself to protect the grid tie inverter. You may have experience, when meet the big lightning, the power source of the home appliance may damage, same reason, will also cause the inverter damage, in this moment, the lightining protection can release thousand voltage to protect the inverter not damage. High speed AC fuse. We now provide access to the ac fuse from the outside of the inverter. Each inverter will come our special ac fuse. This will protect the inverter in less than a millisecond to help prevent high voltage. Spikes from feeding back into the circuitry. Operating Principle For Grid Tie Power Inverter? When you use solar panel through grid tie inverter, your home power meter will reduce the speed(if you are using other electric appliances), or your home power meter will backward(if you are not use any appliances). The inverter can be connected to any outlet at home, when this line run by the conventional electric network. The inverter IC will monitors the volume, frequency and phase of the home grid, then produce a pure sine wave that the frequency and phase will be match the grid’s, and the volume will be higher than the grid’s, then according to our current controlled PWM, to control the output power to the grid. The inverter will puts out power when the home grid is on. Traditional grid tie inverter is the solar panel are connect in series, so if one solar panel did not work or bad efficiency, then the whole system will be effects, but power jack grid tie inverter, you can use every inverter in parallel, in this moment, each inverter has it’s own MPPT, can make every solar panel got the max power. Our grid tie inverter has 1 green light, when the charge fucntion is normal, then this green light will turn on, but if there are not dc sources(like in the night, no sun shine or raining day), the red led light will turn on, the inverter will stop to work, in this moment, the inverter will close the door, the home grid power will not back to inverter. When you set up the grid tie inverter. Pls put the AC plug first. After plug into the home ac source. Dont remove the plug anymore. Otherwise it may have hight voltage spikes. Then connect the DC input. When you want remove the grid tie inverter. Please take away the DC input first. Then you can remove the AC plug. Accessary: will including the AC power cord, DC cable will not including! Specification: 1200w grid tie power inverter 28v-48v. DC to 110v with LCD meter (with mppt function). DC 28-48v (solar panel). 23-27v red light flash. 28-48v, green flash, more larger output more faster. Over 48v, green light on. Less 23v, no light on and no output. No Load current Draw. Dimensions (L x W x H /cm). Fast, Reliably and Directly!! International Buyers Please Note. If you are satisfied with our product and service, pls kindly leave full stars good feedback for us. The item “2 IN 1 ON/OFF 1200W Grid Tie Inverter DC 28V-48V To AC 110V (28-48V Solar Panel)” is in sale since Saturday, August 22, 2015. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “poweronlinesale2008″ and is located in USA. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Russian federation, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.
  • Brand: Unbranded/Generic
  • MPN: Does Not Apply
  • UPC: Does Not Apply

2 IN 1 ON/OFF 1200W Grid Tie Inverter DC 28V-48V To AC 110V (28-48V Solar Panel)
Category: onoff | Comments Off
October 24

2 IN 1 ON/OFF 1200W Grid Tie Power Inverter DC 28V-48V To AC 110V (28-48V Solar)

2 IN 1 ON/OFF 1200W Grid Tie Power Inverter DC 28V-48V To AC 110V (28-48V Solar)
2 IN 1 ON/OFF 1200W Grid Tie Power Inverter DC 28V-48V To AC 110V (28-48V Solar)
2 IN 1 ON/OFF 1200W Grid Tie Power Inverter DC 28V-48V To AC 110V (28-48V Solar)
2 IN 1 ON/OFF 1200W Grid Tie Power Inverter DC 28V-48V To AC 110V (28-48V Solar)
2 IN 1 ON/OFF 1200W Grid Tie Power Inverter DC 28V-48V To AC 110V (28-48V Solar)
2 IN 1 ON/OFF 1200W Grid Tie Power Inverter DC 28V-48V To AC 110V (28-48V Solar)
2 IN 1 ON/OFF 1200W Grid Tie Power Inverter DC 28V-48V To AC 110V (28-48V Solar)
2 IN 1 ON/OFF 1200W Grid Tie Power Inverter DC 28V-48V To AC 110V (28-48V Solar)

2 IN 1 ON/OFF 1200W Grid Tie Power Inverter DC 28V-48V To AC 110V (28-48V Solar)
2015 Version With 3.5 LCD Meter & Solar Panel MPPT Function. 1200 Watt Pure Sine Wave Grid Tie Power Inverter. 28V-48V DC Input 95V-130V AC Output 60Hz Frequency. With LCD Meter Charger For 24V(36V VMP) Solar Panel. 50A/24V, 1200W Solar Controller. A lof of people are using off grid system, means put solar battery to your battery bank, then take the power to using it, this is good idea, however. What happened if your battery bank is full of charge, what happened now for the new solar engery, just let become heat & waste it? You already know need using green energy to protect the earth, but why you waste the green power for not easy to get it(you need hour by hour to get it)why you just let it go? Need cost you another usd200, also 2-3years, you need upgrade your battery, is it smart way? A lof of customers asking what should i do, yes, we hear your voice, now we give you 2 in 1 on/off grid inverter, this will let your green power to battery first, until the battery is full will go to float charging, in this moment, the smart inverter will auto switch to on grid mode, that’s 27.5v, in this moment, your battery already 80% full, as some battery is hard to get more than 80%, in this moment, no need waste power to keep charge your battery, so directly switch to on grid mode. When the battery voltage done to 26.5v, will switch back to off grid mode. This is including 2PCS LCD 3.5 big display, one is showing your solar panel & battery situations. SOLAR OFF/ BTY ON. (this page will clear show you the solar connecting situations). SOLAR ON/ BTY ON. Can clear tell you the solar is correct to connect & battery is on charging. WATT : (will show you how many solar panel coming in). VOLTAGE: (will show you the voltage for your solar panel, laoding voltage). AMP : (will show you how many amp coming into the battery). VOLTAGE : (will show you battery voltage). Capacity : (this you need enter your battery size by your self). Charge tme/F : charge time for full, tell you how long your battery can be full. Total energy: xxx KWH. SET BTY: setting your battery size. SET ETC: setting electricity bill. SET DEL: delete all your total energy & cost. Your solar panel is over voltage. Your battery is low voltage. This has 50A/24V, 1200W SOLAR CONTROLLER on the inverter. INPUT VOLTAGE: 28-48V(For solar panel no load). On grid voltage auto switch: over 27.5v(for your battery). Off grid voltage auto switch: under 26.5v(for your battery). Low battery voltage shut down: 21.5v(for dc output). Auto turn on voltage : 24v(for dc output). Pls make sure you total understand this 2 in 1 function, tks. Difference Between Grid Tie Inverter And Grid Tie Inverter With LCD Meter(2015 version). The LCD meter’s watts is 10000w, it can measure your whole appliance, long time to use and hard to damage. Cooling area is larger 30% than old version, tempreture and fan protection hard to run, can save the power of solar panel, so inverter can use best efficieny. It will bring your life covenient, take you to a green world and enjoy freely! Inverter has mppt function, LED light has different display when inverter is low voltage, working voltage, high voltage. User can know the power states of solar panel through LCD meter as watts, voltage, amps and so on, it’s really a smart inverter. AC Output watt :0 Watt (Max display power 15KWcan display running power less than 1W). AC Output Volt : 0 volt (Max display volt 270V). AC Output Amp : 0 Amp (Max display amp 55A). Total Operation time :0-60000 hoursOperation time: 059 minutes to 24 hours to 2500 days. Electricity consumption: 01000000 kwh. Total operation time , electricity consumption and electricity cost can clear. Can set up power , the meter will alarm when reach reserve power. Can set up the cost. Refresh rate: one time 0.5 seconds. Advantage For Grid Tie Power Inverter. Grid tie inverter is designed for small solar panel energy market, it’s suitable for family enengy system. 14V-24V grid tie inverter suitable for 12v solar panel which rated volt Vmp is about 18V. 28V-48V grid tie inverter suitable for 24v solar panel which rated volt Vmp is about 36V. 52V-88V grid tie inverter suitable for 48v solar panel which rated volt Vmp is about 72V. 102V-158V grid tie inverter suitable for 96v solar panel which rated volt Vmp is about 144V. Do not suitable for wind turbine, pls do not connect wind turbine for the DC source. This inverter can directly use solar panel through inverter to home grid. Easy to installation, just need solar panel, grid tie inverter, then directly can put into home grid. This inverter only has grid tie inverter function, do not have tranditional inverter function, pls do not connect the battery for dc source, for further questions, pls leave message to ask, tks. The inverter are designed for solar panels energy directly , no need battery! For battery, 24v for dc 14-24v inverter ; 36v for dc 28-48v inverter ;72v for dc 52-88v inverter ; 144v for dc 102-158v inverter ;But please do NOT hook these the inverter to battery banks for a long time , it will burn the inverter up over a period of time. If you want to connect with wind turbine , need connect with a dump load controller 12v for dc 14-24v inverter ; 24v for dc 28-48v inverter ; 36v for dc 52-88v inverter ; 72v for dc 102-158v inverter. This kind micro grid tie inverter, at the beginning its output will go up, but when the inverter inside is hot and temperature is too high, the fan will work, the inverter’s output will reduce or stop work for some seconds, after the inverter become cool, it will auto work again, and its output will go up. Separate the position of Red and Black terminal, would not cause short circuit easy. There are one big ball type fan. Speed is equal to CPU’s 2 times. Life time is CPU’s 5 times. Old version is SMT parts, easy drop. 2015 version is DIP, not easy drop and with long life time. 2015 version have 2 group capacity , total 12 pcs , low impedance. Filter is more effective, heating temperature is lower 15 degree than old version. Old version adopts current and voltage control IC, instability. Microchip from USA, it is very. Reaction speed is 10 times faster, 100 times high precision. Double protect for AC when over voltage, island reaction, and voltage spike. It will protect the inverter quickly when city power instability. Old version: turn off the switch, the vestigial current and voltage in DC side may damage the ac mosfets. 2015 new version: when turn off the switch, it will turn off both Ac and Dc side, cut off IC signal, would not damage the mosfet. When input power have 600w , the efficiency can reach to 90% , fan would not work , high efficiency will lead inside not to fever, can save solar power; when input power reach 1200w , the efficiency will keep on 87.5%. 2015 new version only have 1 bi-color light. Low voltage: red light flash, inverter no work. High voltage: green light always on, inverter no work. Normal work situation: green light flash, higher watt flash faster. For this design you are very clear to know where is the problem if the inverter not work, very easy to know if from your solar panel or inverter. Sometimes, if you are using some heavy appliance like motor, enginee, cause the voltage up down very fast, in this moment, big amp will come into the grid tie inverter, easy to cause the ac mos burned, so surge protector will cut down by itself to protect the grid tie inverter. You may have experience, when meet the big lightning, the power source of the home appliance may damage, same reason, will also cause the inverter damage, in this moment, the lightining protection can release thousand voltage to protect the inverter not damage. High speed AC fuse. We now provide access to the ac fuse from the outside of the inverter. Each inverter will come our special ac fuse. This will protect the inverter in less than a millisecond to help prevent high voltage. Spikes from feeding back into the circuitry! Operating Principle For Grid Tie Power Inverter? When you use solar panel through grid tie inverter, your home power meter will reduce the speed(if you are using other electric appliances), or your home power meter will backward(if you are not use any appliances). The inverter can be connected to any outlet at home, when this line run by the conventional electric network. The inverter IC will monitors the volume, frequency and phase of the home grid, then produce a pure sine wave that the frequency and phase will be match the grid’s, and the volume will be higher than the grid’s, then according to our current controlled PWM, to control the output power to the grid. The inverter will puts out power when the home grid is on. Traditional grid tie inverter is the solar panel are connect in series, so if one solar panel did not work or bad efficiency, then the whole system will be effects, but power jack grid tie inverter, you can use every inverter in parallel, in this moment, each inverter has it’s own MPPT, can make every solar panel got the max power. Our grid tie inverter has 1 green light, when the charge fucntion is normal, then this green light will turn on, but if there are not dc sources(like in the night, no sun shine or raining day), the red led light will turn on, the inverter will stop to work, in this moment, the inverter will close the door, the home grid power will not back to inverter. When you set up the grid tie inverter. Pls put the AC plug first. After plug into the home ac source. Dont remove the plug anymore. Otherwise it may have hight voltage spikes. Then connect the DC input. When you want remove the grid tie inverter. Please take away the DC input first. Then you can remove the AC plug. Accessary: will including the AC power cord, DC cable will not including! Fast, Reliably and Directly!! Website for ref is. International Buyers Please Note. If you are satisfied with our product and service, pls kindly leave full stars good feedback for us. The item “2 IN 1 ON/OFF 1200W Grid Tie Power Inverter DC 28V-48V To AC 110V (28-48V Solar)” is in sale since Wednesday, July 22, 2015. This item is in the category “Consumer Electronics\Vehicle Electronics & GPS\Car Electronics Accessories\Power Inverters”. The seller is “onlinesale36″ and is located in USA. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia, South africa, New Zealand.
  • Brand: Power Jack
  • Type: Pure Sine Inverter
  • Model: 1200w
  • RMS Power: 1200W
  • Input Voltage: DC 28V-48V
  • Output Voltage: AC 110V
  • Features: High Voltage Input Protection
  • MPN: grid tie inverter
  • UPC: Does not apply

2 IN 1 ON/OFF 1200W Grid Tie Power Inverter DC 28V-48V To AC 110V (28-48V Solar)
Category: onoff | Comments Off
August 5

1200W ON/OFF SOLAR GRID TIE POWER INVERTER DC26.4V-45V to AC110V, 2 LCD display

1200W ON/OFF SOLAR GRID TIE POWER INVERTER DC26.4V-45V to AC110V, 2 LCD display
1200W ON/OFF SOLAR GRID TIE POWER INVERTER DC26.4V-45V to AC110V, 2 LCD display
1200W ON/OFF SOLAR GRID TIE POWER INVERTER DC26.4V-45V to AC110V, 2 LCD display
1200W ON/OFF SOLAR GRID TIE POWER INVERTER DC26.4V-45V to AC110V, 2 LCD display

1200W ON/OFF SOLAR GRID TIE POWER INVERTER DC26.4V-45V to AC110V, 2 LCD display
NEW DESIGN FOR 1200W Grid tie power inverter ON/OFF GRID. With 2 3.5 LCD meter. For solar panel 24V system (best solar panel working voltage 36V). A lot of people are using off grid system, means put solar battery to your battery bank, then take the power to using it, this is good idea, however what happened if your battery bank is full of charge, what happened now for the new solar energy, just let become heat & waste it? You already know need using green energy to protect the earth, but why you waste the green power for not easy to get it(you need hour by hour to get it) why you just let it go? A lof of customers asking what should i do, yes, we hear your voice, now we give you 2 in 1 on/off grid inverter, this will let your green power to battery first, until the battery is full will go to float charging, in this moment, the smart inverter will auto switch to on grid mode, that’s 27.5v, in this moment, your battery already 80% full, as some battery is hard to get more than 80%, in this moment, no need waste power to keep charge your battery, so directly switch to on grid mode. When the battery voltage done to 26.5v, will switch back to off grid mode. This is including 2 PCS of 3.5 big LCD display, one is showing your solar panel & battery situations. This has 50A/24V, 1200W SOLAR CONTROLLER on the inverter. Spec: CAHRGER CURRENT: 50A. INPUT VOLTAGE: 28-48V(For solar panel no load). On grid voltage auto switch: over 27.5v(for your battery). Off grid voltage auto switch: under 26.5v(for your battery). Low battery voltage shut down: 21.5v(for dc output). Auto turn on voltage : 24v(for dc output). Solar controller dc input display. News of this version. We separated the positions of the Red and Black dc input terminals. This provides for easier connection and makes an accidental short circuit much less likely. There are 2 ball type fans for greater air flow. The CPU lifetime is extended by 5 times the old version’s. The PCB board The old version uses SMT parts. These are easily dislodged by impacts or thermal expansion. The 2013 5.0 version has 2 groups of Capacitors, a total of 12 pcs. The low impedance filter is more efficient, running 27F / 15C degrees cooler than old version. The old version used a current and voltage control IC that had instabilities. The 2013 5.0 New version uses a new microchip from the USA. It is very stable and the reaction speed is 10 times faster, 100 times more precise, just like a Rolex J. Double protection circuit for AC when there is over voltage , an island reaction, or a voltage spike. This will protect the inverter quickly if there is an instability in line power. This prevents any damage to the mosfets. 7: When input power is 600w, the efficiency can reach 90% so the fan does not need to run as much. The high efficiency keeps the insides cool and can utilize a greater percentage of your solar power. When input power reach 1200w , the efficiency will stay at or above 87.5%. The 2013 5.0 new version has only 1 bi-colored light. Low voltage : the red light flashes and the inverter will not function. High voltage : the green light always on and the inverter will not function. Normal situation: The green light flashes and the faster the flashing, the greater the wattage the inverter is producing. PSWGT-1200-26.4V-45V/110 + LCD meter. DC26.4V-45V Volt (solar panel). No Load current Draw. 55 C ± 5. Dimensions (L x W x H /cm). 47 22 8 CM. Sometimes, if you are using some heaving appliance like motor, engine, cause the voltage up down very fast, in this moment, big amp will come into the grid inverter, easy to cause the ac mos burned, so surge protector will cut down by itself to protect the grid inverter. You may have experience, when meet the big lightning, the power source of the home appliance may damage, same reason, will also cause the inverter damage, in this moment the lightning protection can release thousand voltages to protect the inverter not damage. High speed AC fuses. Now we put ac fuse outside, each inverter will come our special ac fuse, this will be broken 1 mini/sec, to make sure high voltage spike come in! Is designed for small solar panel & wind energy market, it’s suitable for family energy system. This inverter can directly use solar panel, wind charger through inverter to home grid. Easy to installation, just need solar panel, grid tie inverter, then directly can put into home grid. The inverter can be connected to any outlet in the home providing line power. The inverter IC will monitors the voltage, frequency and phase of the home grid, then produce a pure sine wave phase locked to the grid. The voltage will be just enough higher than the grid’s to feed power into the grid, Then using our current controlled PWM we control the output power to the grid. The inverter will put out power when the home grid is on. The inverter will stop feeding power into the grid when the grid is down, for safety and as required by law. Why should you use a grid tie inverter? When you use power from solar panels to supply the inverter, your home power. Meter will run more slowly(if you are using other electric appliances), or your. Home power meter will run backward(if you are not use any appliances). Why should you use a Power Jack grid tie inverter. In traditional grid tie inverters, the solar panels are connect in series so if one solar panel did not work or had poor efficiency or had a blown bypass diode, then the whole system is affected. With Power Jack inverters, you can use all panels in parallel so if one is not working properly, you only lose the output from that one panel. You can also run several Power Jack inverters parallel instead of having one large expensive unit. If you have just one expensive inverter and it fails you produce no power. If you have several smaller units and one fails you still produce power. Each inverter has it’s own MPPT function so you can extract the maximum power from all of your solar panels. When the dc charge function is normal, the inverter supplies power. If there are no dc sources (like at night or a cloudy or rainy day), the inverter will stop attempting to supply power and shut itself off from the power grid to protect itself and lengthen its lifetime. For DC 14V-24V inverter. For DC 28V-48V inverter. For DC 50V-88V inverter. For DC 102V-158V inverter. 11.5V – 13.5V. Orange light on, fan keep working, but inverter stop working. Green flash faster and more powerful output. Manufacture defects or workmanship, use appropriately, surface of item do not scratch. Manufacture defects or workmanship excludes damage caused by inappropriately used such as improper installation, accident, misuse, abuse, improper storage, or any unauthorized disassembly, repair, or modification. The item “1200W ON/OFF SOLAR GRID TIE POWER INVERTER DC26.4V-45V to AC110V, 2 LCD display” is in sale since Wednesday, June 22, 2016. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Solar Panels”. The seller is “powerinverter-sp” and is located in USA. This item can be shipped worldwide.
  • Brand: Power Jack
  • MPN: Does Not Apply

1200W ON/OFF SOLAR GRID TIE POWER INVERTER DC26.4V-45V to AC110V, 2 LCD display
Category: 1200w | Comments Off
February 11

Grid tie Power inverter on/off grid interactive

Grid tie Power inverter on/off grid interactive
Grid tie Power inverter on/off grid interactive
Grid tie Power inverter on/off grid interactive
Grid tie Power inverter on/off grid interactive
Grid tie Power inverter on/off grid interactive
Grid tie Power inverter on/off grid interactive

Grid tie Power inverter on/off grid interactive
Made in the USA True sine wave inverter and 100 amp solar charge controller. For on and off grid. 120v AC output 5000 watt continues output. 10000 max for hard load startup.. Will sell excess power, up to 5000 watts back to the grid. The item “Grid tie Power inverter on/off grid interactive” is in sale since Saturday, February 11, 2017. This item is in the category “Consumer Electronics\Vehicle Electronics & GPS\Car Electronics Accessories\Power Inverters”. The seller is “innocente1959″ and is located in Spokane, Washington. This item can be shipped to United States.
  • Brand: advanced energy inc.

Grid tie Power inverter on/off grid interactive
Category: grid | Comments Off
January 13

2 IN 1 ON/OFF 1200W Grid Tie Power Inverter DC 28V-48V To AC 110V (28-48V Solar)

2 IN 1 ON/OFF 1200W Grid Tie Power Inverter DC 28V-48V To AC 110V (28-48V Solar)
2 IN 1 ON/OFF 1200W Grid Tie Power Inverter DC 28V-48V To AC 110V (28-48V Solar)
2 IN 1 ON/OFF 1200W Grid Tie Power Inverter DC 28V-48V To AC 110V (28-48V Solar)
2 IN 1 ON/OFF 1200W Grid Tie Power Inverter DC 28V-48V To AC 110V (28-48V Solar)
2 IN 1 ON/OFF 1200W Grid Tie Power Inverter DC 28V-48V To AC 110V (28-48V Solar)
2 IN 1 ON/OFF 1200W Grid Tie Power Inverter DC 28V-48V To AC 110V (28-48V Solar)

2 IN 1 ON/OFF 1200W Grid Tie Power Inverter DC 28V-48V To AC 110V (28-48V Solar)
2 IN 1 ON/OFF. 2015 Version 6.0 & With Solar Panel MPPT Function. Pure Sine Wave Grid Tie Power Inverter. 28V-48V DC Input 95V-130V AC Output 60Hz Frequency. With LCD Meter Charger For 24V(36V VMP) Solar Panel. 50A/24V, 1200W Solar Controller. A lof of people are using off grid system, means put solar battery to your battery bank, then take the power to using it, this is good idea, however what happened if your battery bank is full of charge, what happened now for the new solar engery, just let become heat & waste it? You already know need using green energy to protect the earth, but why you waste the green power for not easy to get it(you need hour by hour to get it)why you just let it go? A lof of customers asking what should i do, yes, we hear your voice, now we give you 2 in 1 on/off grid inverter, this will let your green power to battery first, until the battery is full will go to float charging, in this moment, the smart inverter will auto switch to on grid mode, that’s 27.5v, in this moment, your battery already 80% full, as some battery is hard to get more than 80%, in this moment, no need waste power to keep charge your battery, so directly switch to on grid mode. When the battery voltage done to 26.5v, will switch back to off grid mode. This is including 2PCS LCD 3.5 big display, one is showing your solar panel & battery situations. SOLAR OFF/ BTY ON. (this page will clear show you the solar connecting situations). SOLAR ON/ BTY ON. Can clear tell you the solar is correct to connect & battery is on charging. WATT : (will show you how many solar panel coming in). VOLTAGE: (will show you the voltage for your solar panel, laoding voltage). AMP : (will show you how many amp coming into the battery). VOLTAGE : (will show you battery voltage). Capacity : (this you need enter your battery size by your self). Charge tme/F : charge time for full, tell you how long your battery can be full. Total energy: xxx KWH. SET BTY: setting your battery size. SET ETC: setting electricity bill. SET DEL: delete all your total energy & cost. Your solar panel is over voltage. Your battery is low voltage. This has 50A/24V, 1200W SOLAR CONTROLLER on the inverter. INPUT VOLTAGE: 28-48V(For solar panel no load). On grid voltage auto switch: over 27.5v(for your battery). Off grid voltage auto switch: under 26.5v(for your battery). Low battery voltage shut down: 21.5v(for dc output). Auto turn on voltage : 24v(for dc output). Pls make sure you total understand this 2 in 1 function, tks. Difference B etween Grid Tie Inverter And Grid Tie Inverter With LCD Meter(2015 version 6.0). The LCD meter’s watts is 10000w, it can measure your whole appliance, long time to use and hard to damage. Cooling area is larger 30% than old version, tempreture and fan protection hard to run, can save the power of solar panel, so inverter can use best efficieny. It will bring your life covenient, take you to a green world and enjoy freely! Inverter has mppt function, LED light has different display when inverter is low voltage, working voltage, high voltage. User can know the power states of solar panel through LCD meter as watts, voltage, amps and so on, it’s really a smart inverter. AC Output watt :0 Watt (Max display power 15KWcan display running power less than 1W). AC Output Volt : 0 volt (Max display volt 270V). AC Output Amp : 0 Amp (Max display amp 55A). Total Operation time :0-60000 hoursOperation time: 059 minutes to 24 hours to 2500 days. Electricity consumption: 01000000 kwh. Total operation time , electricity consumption and electricity cost can clear. Can set up power , the meter will alarm when reach reserve power. Can set up the cost. Refresh rate: one time 0.5 seconds. Advantage For Grid Tie. Grid tie inverter is designed for small solar panel energy market, it’s suitable for family enengy system. 14V-24V grid tie inverter suitable for 12v solar panel which rated volt Vmp is about 18V. 28V-48V grid tie inverter suitable for 24v solar panel which rated volt Vmp is about 36V. 50V-88V grid tie inverter suitable for 48v solar panel which rated volt Vmp is about 72V. Do not suitable for wind turbine, pls do not connect wind turbine for the DC source. This inverter can directly use solar panel through inverter to home grid. Easy to installation, just need solar panel, grid tie inverter, then directly can put into home grid. This inverter only has grid tie inverter function, do not have tranditional inverter function, pls do not connect the battery for 12v dc source, for further questions, pls leave message to ask, tks. The inverter are designed for solar panels energy directly , no need battery! For battery, 24v for dc 14-24v inverter ; 36v for dc 28-48v inverter ;But please do NOT hook these the inverter to battery banks for a long time , it will burn the inverter up over a period of time. If you want to connect with wind turbine , need connect with a dump load controller 12v for dc 14-24v inverter ; 24v for dc 28-48v inverter ; 36v for dc 50-88v inverter. This kind micro grid tie inverter, at the beginning its output will go up, but when the inverter inside is hot and temperature is too high, the fan will work, the inverter’s output will reduce or stop work for some seconds, after the inverter become cool, it will auto work again, and its output will go up. Separate the position of Red and Black terminal, would not cause short circuit easy. There are one big ball type fan. Speed is equal to CPU’s 2 times. Life time is CPU’s 5 times. Old version is SMT parts, easy drop. 2014 6.0 version is DIP, not easy drop and with long life time. 2014 6.0 version have 2 group capacity , total 12 pcs , low impedance. Filter is more effective, heating temperature is lower 15 degree than old version. Old version adopts current and voltage control IC, instability. 2014 6.0 New version adopt. Microchip from USA, it is very. Reaction speed is 10 times faster, 100 times high. Double protect for AC when over voltage, island reaction, and voltage spike. It will protect the inverter quickly when city power instability. Old version: turn off the switch, the vestigial current and voltage in DC side may damage the ac mosfets. 2014 6.0 new version: when turn off the switch, it will turn off both Ac and Dc side, cut off IC signal, would not damage the mosfet. 8: When input power have 600w , the efficiency can reach to 90% , fan would not work , high efficiency will lead inside not to fever, can save solar power; when input power reach 1200w , the efficiency will keep on 87.5%. 2016 6.0 new version only have 1 bi-color light. Low voltage: red light flash, inverter no work. High voltage: green light always on, inverter no work. Normal work situation: green light flash, higher watt flash faster. For this design you are very clear to know where is the problem if the inverter not work, very easy to know if from your solar panel or inverter. Sometimes, if you are using some heavy appliance like motor, enginee, cause the voltage up down very fast, in this moment, big amp will come into the grid tie inverter, easy to cause the ac mos burned, so surge protector will cut down by itself to protect the grid tie inverter. You may have experience, when meet the big lightning, the power source of the home appliance may damage, same reason, will also cause the inverter damage, in this moment, the lightining protection can release thousand voltage to protect the inverter not damage. High speed AC fuse. We now provide access to the ac fuse from the outside of the inverter. Each inverter will come our special ac fuse. This will protect the inverter in less than a millisecond to help prevent high voltage. Spikes from feeding back into the circuitry! Grid Tie Power Inverter? When you use solar panel through grid tie inverter, your home power meter will reduce the speed(if you are using other electric appliances), or your home power meter will backward(if you are not use any appliances). The inverter can be connected to any outlet at home, when this line run by the conventional electric network. The inverter IC will monitors the volume, frequency and phase of the home grid, then produce a pure sine wave that the frequency and phase will be match the grid’s, and the volume will be higher than the grid’s, then according to our current controlled PWM, to control the output power to the grid. The inverter will puts out power when the home grid is on. Traditional grid tie inverter is the solar panel are connect in series, so if one solar panel did not work or bad efficiency, then the whole system will be effects, but power jack grid tie inverter, you can use every inverter in parallel, in this moment, each inverter has it’s own MPPT, can make every solar panel got the max power. Our grid tie inverter has 3greens light, when the charge fucntion is normal, then this 3lights will turn on, but if there are not dc sources(like in the night, no sun shine or raining day), the red led light will turn on, the inverter will stop to work, in this moment, the inverter will close the door, the home grid power will not back to inverter. When you set up the grid tie inverter. Pls put the AC plug first. After plug into the home ac source. Dont remove the plug anymore. Otherwise it may have hight voltage spikes. Then connect the DC input. When you want remove the grid tie inverter. Please take away the DC input first. Then you can remove the AC plug. Accessary: will including the AC power cord, DC cable will not including! Specification: 1200w grid tie power inverter 28v-48v. DC to 110v with LCD meter (with mppt function). DC 28-48v (solar panel). 23-27v red light flash. 28-48v, green flash, more larger output more faster. Over 48v, green light on. Less 23v, no light on and no output. No Load current Draw. Dimensions (L x W x H /cm). AC Output watt :0 Watt Max display power 15KW. Can display running power less than 1W. Total Operation time :0-60000 hours. 59 minutes to 24 hours to 2500 days. Fast, Reliably and Directly!! International Buyers Please Note. If you are satisfied with our product and service, pls kindly leave full stars good feedback for us. The item “2 IN 1 ON/OFF 1200W Grid Tie Power Inverter DC 28V-48V To AC 110V (28-48V Solar)” is in sale since Wednesday, January 11, 2017. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “powerinverter-onlinesale” and is located in USA. This item can be shipped to United States, to Canada, to United Kingdom, DK, RO, SK, BG, CZ, FI, HU, LV, LT, MT, EE, to Australia, GR, PT, CY, SI, to Japan, to China, SE, KR, ID, to Taiwan, ZA, TH, to Belgium, to France, to Hong Kong, to Ireland, to Netherlands, PL, to Spain, to Italy, to Germany, to Austria, RU, IL, to Mexico, to New Zealand, PH, SG, to Switzerland, NO, SA, UA, AE, QA, KW, BH, HR, MY, BR, CL, CO, CR, PA, TT, GT, HN, JM.
  • Brand: Unbranded/Generic
  • MPN: Does Not Apply
  • UPC: Does Not Apply

2 IN 1 ON/OFF 1200W Grid Tie Power Inverter DC 28V-48V To AC 110V (28-48V Solar)
Category: onoff | Comments Off
December 13

2 IN 1 ON/OFF 1200W Grid Tie Power Inverter DC 28V-48V To AC 110V (28-48V Solar)

2 IN 1 ON/OFF 1200W Grid Tie Power Inverter DC 28V-48V To AC 110V (28-48V Solar)
2 IN 1 ON/OFF 1200W Grid Tie Power Inverter DC 28V-48V To AC 110V (28-48V Solar)
2 IN 1 ON/OFF 1200W Grid Tie Power Inverter DC 28V-48V To AC 110V (28-48V Solar)
2 IN 1 ON/OFF 1200W Grid Tie Power Inverter DC 28V-48V To AC 110V (28-48V Solar)
2 IN 1 ON/OFF 1200W Grid Tie Power Inverter DC 28V-48V To AC 110V (28-48V Solar)
2 IN 1 ON/OFF 1200W Grid Tie Power Inverter DC 28V-48V To AC 110V (28-48V Solar)
2 IN 1 ON/OFF 1200W Grid Tie Power Inverter DC 28V-48V To AC 110V (28-48V Solar)
2 IN 1 ON/OFF 1200W Grid Tie Power Inverter DC 28V-48V To AC 110V (28-48V Solar)

2 IN 1 ON/OFF 1200W Grid Tie Power Inverter DC 28V-48V To AC 110V (28-48V Solar)
2015 Version With 3.5 LCD Meter & Solar Panel MPPT Function. 1200 Watt Pure Sine Wave Grid Tie Power Inverter. 28V-48V DC Input 95V-130V AC Output 60Hz Frequency. With LCD Meter Charger For 24V(36V VMP) Solar Panel. 50A/24V, 1200W Solar Controller. A lof of people are using off grid system, means put solar battery to your battery bank, then take the power to using it, this is good idea, however what happened if your battery bank is full of charge, what happened now for the new solar engery, just let become heat & waste it? You already know need using green energy to protect the earth, but why you waste the green power for not easy to get it(you need hour by hour to get it)why you just let it go? A lof of customers asking what should i do, yes, we hear your voice, now we give you 2 in 1 on/off grid inverter, this will let your green power to battery first, until the battery is full will go to float charging, in this moment, the smart inverter will auto switch to on grid mode, that’s 27.5v, in this moment, your battery already 80% full, as some battery is hard to get more than 80%, in this moment, no need waste power to keep charge your battery, so directly switch to on grid mode. When the battery voltage done to 26.5v, will switch back to off grid mode. This is including 2PCS LCD 3.5 big display, one is showing your solar panel & battery situations. SOLAR OFF/ BTY ON. (this page will clear show you the solar connecting situations). SOLAR ON/ BTY ON. Can clear tell you the solar is correct to connect & battery is on charging. WATT : (will show you how many solar panel coming in). VOLTAGE: (will show you the voltage for your solar panel, laoding voltage). AMP : (will show you how many amp coming into the battery). VOLTAGE : (will show you battery voltage). Capacity : (this you need enter your battery size by your self). Charge tme/F : charge time for full, tell you how long your battery can be full. Total energy: xxx KWH. SET BTY: setting your battery size. SET ETC: setting electricity bill. SET DEL: delete all your total energy & cost. Your solar panel is over voltage. Your battery is low voltage. This has 50A/24V, 1200W SOLAR CONTROLLER on the inverter. INPUT VOLTAGE: 28-48V(For solar panel no load). On grid voltage auto switch: over 27.5v(for your battery). Off grid voltage auto switch: under 26.5v(for your battery). Low battery voltage shut down: 21.5v(for dc output). Auto turn on voltage : 24v(for dc output). Pls make sure you total understand this 2 in 1 function, tks. Difference Between Grid Tie Inverter And Grid Tie Inverter With LCD Meter(2015 version). The LCD meter’s watts is 10000w, it can measure your whole appliance, long time to use and hard to damage. Cooling area is larger 30% than old version, tempreture and fan protection hard to run, can save the power of solar panel, so inverter can use best efficieny. It will bring your life covenient, take you to a green world and enjoy freely! Inverter has mppt function, LED light has different display when inverter is low voltage, working voltage, high voltage. User can know the power states of solar panel through LCD meter as watts, voltage, amps and so on, it’s really a smart inverter. AC Output watt :0 Watt (Max display power 15KWcan display running power less than 1W). AC Output Volt : 0 volt (Max display volt 270V). AC Output Amp : 0 Amp (Max display amp 55A). Total Operation time :0-60000 hoursOperation time: 059 minutes to 24 hours to 2500 days. Electricity consumption: 01000000 kwh. Total operation time , electricity consumption and electricity cost can clear. Can set up power , the meter will alarm when reach reserve power. Can set up the cost. Refresh rate: one time 0.5 seconds. Advantage For Grid Tie. Grid tie inverter is designed for small solar panel energy market, it’s suitable for family enengy system. 14V-24V grid tie inverter suitable for 12v solar panel which rated volt Vmp is about 18V. 28V-48V grid tie inverter suitable for 24v solar panel which rated volt Vmp is about 36V. 52V-88V grid tie inverter suitable for 48v solar panel which rated volt Vmp is about 72V. 102V-158V grid tie inverter suitable for 96v solar panel which rated volt Vmp is about 144V. Do not suitable for wind turbine, pls do not connect wind turbine for the DC source. This inverter can directly use solar panel through inverter to home grid. Easy to installation, just need solar panel, grid tie inverter, then directly can put into home grid. This inverter only has grid tie inverter function, do not have tranditional inverter function, pls do not connect the battery for 12v dc source, for further questions, pls leave message to ask, tks. The inverter are designed for solar panels energy directly , no need battery! For battery, 24v for dc 14-24v inverter ; 36v for dc 28-48v inverter ;72v for dc 52-88v inverter ; 144v for dc 102-158v inverter ;But please do NOT hook these the inverter to battery banks for a long time , it will burn the inverter up over a period of time. If you want to connect with wind turbine , need connect with a dump load controller 12v for dc 14-24v inverter ; 24v for dc 28-48v inverter ; 36v for dc 52-88v inverter ; 72v for dc 102-158v inverter. This kind micro grid tie inverter, at the beginning its output will go up, but when the inverter inside is hot and temperature is too high, the fan will work, the inverter’s output will reduce or stop work for some seconds, after the inverter become cool, it will auto work again, and its output will go up. Separate the position of Red and Black terminal, would not cause short circuit easy. There are one big ball type fan. Speed is equal to CPU’s 2 times. Life time is CPU’s 5 times. Old version is SMT parts, easy drop. 2015 version is DIP, not easy drop and with long life time. 2015 version have 2 group capacity , total 12 pcs , low impedance. Filter is more effective, heating temperature is lower 15 degree than old version. Old version adopts current and voltage control IC, instability. Microchip from USA, it is very. Reaction speed is 10 times faster, 100 times high precision. Double protect for AC when over voltage, island reaction, and voltage spike. It will protect the inverter quickly when city power instability. Old version: turn off the switch, the vestigial current and voltage in DC side may damage the ac mosfets. 2015 new version: when turn off the switch, it will turn off both Ac and Dc side, cut off IC signal, would not damage the mosfet. When input power have 600w , the efficiency can reach to 90% , fan would not work , high efficiency will lead inside not to fever, can save solar power; when input power reach 1200w , the efficiency will keep on 87.5%. 2015 new version only have 1 bi-color light. Low voltage: red light flash, inverter no work. High voltage: green light always on, inverter no work. Normal work situation: green light flash, higher watt flash faster. For this design you are very clear to know where is the problem if the inverter not work, very easy to know if from your solar panel or inverter. Sometimes, if you are using some heavy appliance like motor, enginee, cause the voltage up down very fast, in this moment, big amp will come into the grid tie inverter, easy to cause the ac mos burned, so surge protector will cut down by itself to protect the grid tie inverter. You may have experience, when meet the big lightning, the power source of the home appliance may damage, same reason, will also cause the inverter damage, in this moment, the lightining protection can release thousand voltage to protect the inverter not damage. High speed AC fuse. We now provide access to the ac fuse from the outside of the inverter. Each inverter will come our special ac fuse. This will protect the inverter in less than a millisecond to help prevent high voltage. Spikes from feeding back into the circuitry! Grid Tie Power Inverter? When you use solar panel through grid tie inverter, your home power meter will reduce the speed(if you are using other electric appliances), or your home power meter will backward(if you are not use any appliances). The inverter can be connected to any outlet at home, when this line run by the conventional electric network. The inverter IC will monitors the volume, frequency and phase of the home grid, then produce a pure sine wave that the frequency and phase will be match the grid’s, and the volume will be higher than the grid’s, then according to our current controlled PWM, to control the output power to the grid. The inverter will puts out power when the home grid is on. Traditional grid tie inverter is the solar panel are connect in series, so if one solar panel did not work or bad efficiency, then the whole system will be effects, but power jack grid tie inverter, you can use every inverter in parallel, in this moment, each inverter has it’s own MPPT, can make every solar panel got the max power. Our grid tie inverter has 3greens light, when the charge fucntion is normal, then this 3lights will turn on, but if there are not dc sources(like in the night, no sun shine or raining day), the red led light will turn on, the inverter will stop to work, in this moment, the inverter will close the door, the home grid power will not back to inverter. When you set up the grid tie inverter. Pls put the AC plug first. After plug into the home ac source. Dont remove the plug anymore. Otherwise it may have hight voltage spikes. Then connect the DC input. When you want remove the grid tie inverter. Please take away the DC input first. Then you can remove the AC plug. Accessary: will including the AC power cord, DC cable will not including! Fast, Reliably and Directly!! International Buyers Please Note. The item “2 IN 1 ON/OFF 1200W Grid Tie Power Inverter DC 28V-48V To AC 110V (28-48V Solar)” is in sale since Wednesday, July 22, 2015. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “powerengineryworld2011″ and is located in USA. This item can be shipped to North, South, or Latin America, to all countries in Europe, to all countries in continental Asia, to Australia, ZA, to New Zealand.
  • Brand: Unbranded/Generic
  • MPN: Does Not Apply
  • UPC: Does Not Apply

2 IN 1 ON/OFF 1200W Grid Tie Power Inverter DC 28V-48V To AC 110V (28-48V Solar)
Category: onoff | Comments Off
December 7

2 IN 1 ON/OFF 1200W Grid Tie Power Inverter DC 28V-48V To AC 110V (28-48V Solar)

2 IN 1 ON/OFF 1200W Grid Tie Power Inverter DC 28V-48V To AC 110V (28-48V Solar)
2 IN 1 ON/OFF 1200W Grid Tie Power Inverter DC 28V-48V To AC 110V (28-48V Solar)
2 IN 1 ON/OFF 1200W Grid Tie Power Inverter DC 28V-48V To AC 110V (28-48V Solar)
2 IN 1 ON/OFF 1200W Grid Tie Power Inverter DC 28V-48V To AC 110V (28-48V Solar)
2 IN 1 ON/OFF 1200W Grid Tie Power Inverter DC 28V-48V To AC 110V (28-48V Solar)
2 IN 1 ON/OFF 1200W Grid Tie Power Inverter DC 28V-48V To AC 110V (28-48V Solar)

2 IN 1 ON/OFF 1200W Grid Tie Power Inverter DC 28V-48V To AC 110V (28-48V Solar)
2 IN 1 ON/OFF. 2015 Version 6.0 & With Solar Panel MPPT Function. Pure Sine Wave Grid Tie Power Inverter. 28V-48V DC Input 95V-130V AC Output 60Hz Frequency. With LCD Meter Charger For 24V(36V VMP) Solar Panel. 50A/24V, 1200W Solar Controller. A lof of people are using off grid system, means put solar battery to your battery bank, then take the power to using it, this is good idea, however what happened if your battery bank is full of charge, what happened now for the new solar engery, just let become heat & waste it? You already know need using green energy to protect the earth, but why you waste the green power for not easy to get it(you need hour by hour to get it)why you just let it go? A lof of customers asking what should i do, yes, we hear your voice, now we give you 2 in 1 on/off grid inverter, this will let your green power to battery first, until the battery is full will go to float charging, in this moment, the smart inverter will auto switch to on grid mode, that’s 27.5v, in this moment, your battery already 80% full, as some battery is hard to get more than 80%, in this moment, no need waste power to keep charge your battery, so directly switch to on grid mode. When the battery voltage done to 26.5v, will switch back to off grid mode. This is including 2PCS LCD 3.5 big display, one is showing your solar panel & battery situations. SOLAR OFF/ BTY ON. (this page will clear show you the solar connecting situations). SOLAR ON/ BTY ON. Can clear tell you the solar is correct to connect & battery is on charging. WATT : (will show you how many solar panel coming in). VOLTAGE: (will show you the voltage for your solar panel, laoding voltage). AMP : (will show you how many amp coming into the battery). VOLTAGE : (will show you battery voltage). Capacity : (this you need enter your battery size by your self). Charge tme/F : charge time for full, tell you how long your battery can be full. Total energy: xxx KWH. SET BTY: setting your battery size. SET ETC: setting electricity bill. SET DEL: delete all your total energy & cost. Your solar panel is over voltage. Your battery is low voltage. This has 50A/24V, 1200W SOLAR CONTROLLER on the inverter. INPUT VOLTAGE: 28-48V(For solar panel no load). On grid voltage auto switch: over 27.5v(for your battery). Off grid voltage auto switch: under 26.5v(for your battery). Low battery voltage shut down: 21.5v(for dc output). Auto turn on voltage : 24v(for dc output). Pls make sure you total understand this 2 in 1 function, tks. Difference B etween Grid Tie Inverter And Grid Tie Inverter With LCD Meter(2015 version 6.0). The LCD meter’s watts is 10000w, it can measure your whole appliance, long time to use and hard to damage. Cooling area is larger 30% than old version, tempreture and fan protection hard to run, can save the power of solar panel, so inverter can use best efficieny. It will bring your life covenient, take you to a green world and enjoy freely! Inverter has mppt function, LED light has different display when inverter is low voltage, working voltage, high voltage. User can know the power states of solar panel through LCD meter as watts, voltage, amps and so on, it’s really a smart inverter. AC Output watt :0 Watt (Max display power 15KWcan display running power less than 1W). AC Output Volt : 0 volt (Max display volt 270V). AC Output Amp : 0 Amp (Max display amp 55A). Total Operation time :0-60000 hoursOperation time: 059 minutes to 24 hours to 2500 days. Electricity consumption: 01000000 kwh. Total operation time , electricity consumption and electricity cost can clear. Can set up power , the meter will alarm when reach reserve power. Can set up the cost. Refresh rate: one time 0.5 seconds. Advantage For Grid Tie. Grid tie inverter is designed for small solar panel energy market, it’s suitable for family enengy system. 14V-24V grid tie inverter suitable for 12v solar panel which rated volt Vmp is about 18V. 28V-48V grid tie inverter suitable for 24v solar panel which rated volt Vmp is about 36V. 50V-88V grid tie inverter suitable for 48v solar panel which rated volt Vmp is about 72V. Do not suitable for wind turbine, pls do not connect wind turbine for the DC source. This inverter can directly use solar panel through inverter to home grid. Easy to installation, just need solar panel, grid tie inverter, then directly can put into home grid. This inverter only has grid tie inverter function, do not have tranditional inverter function, pls do not connect the battery for 12v dc source, for further questions, pls leave message to ask, tks. The inverter are designed for solar panels energy directly , no need battery! For battery, 24v for dc 14-24v inverter ; 36v for dc 28-48v inverter ;But please do NOT hook these the inverter to battery banks for a long time , it will burn the inverter up over a period of time. If you want to connect with wind turbine , need connect with a dump load controller 12v for dc 14-24v inverter ; 24v for dc 28-48v inverter ; 36v for dc 50-88v inverter. This kind micro grid tie inverter, at the beginning its output will go up, but when the inverter inside is hot and temperature is too high, the fan will work, the inverter’s output will reduce or stop work for some seconds, after the inverter become cool, it will auto work again, and its output will go up. Separate the position of Red and Black terminal, would not cause short circuit easy. There are one big ball type fan. Speed is equal to CPU’s 2 times. Life time is CPU’s 5 times. Old version is SMT parts, easy drop. 2014 6.0 version is DIP, not easy drop and with long life time. 2014 6.0 version have 2 group capacity , total 12 pcs , low impedance. Filter is more effective, heating temperature is lower 15 degree than old version. Old version adopts current and voltage control IC, instability. 2014 6.0 New version adopt. Microchip from USA, it is very. Reaction speed is 10 times faster, 100 times high. Double protect for AC when over voltage, island reaction, and voltage spike. It will protect the inverter quickly when city power instability. Old version: turn off the switch, the vestigial current and voltage in DC side may damage the ac mosfets. 2014 6.0 new version: when turn off the switch, it will turn off both Ac and Dc side, cut off IC signal, would not damage the mosfet. 8: When input power have 600w , the efficiency can reach to 90% , fan would not work , high efficiency will lead inside not to fever, can save solar power; when input power reach 1200w , the efficiency will keep on 87.5%. 2016 6.0 new version only have 1 bi-color light. Low voltage: red light flash, inverter no work. High voltage: green light always on, inverter no work. Normal work situation: green light flash, higher watt flash faster. For this design you are very clear to know where is the problem if the inverter not work, very easy to know if from your solar panel or inverter. Sometimes, if you are using some heavy appliance like motor, enginee, cause the voltage up down very fast, in this moment, big amp will come into the grid tie inverter, easy to cause the ac mos burned, so surge protector will cut down by itself to protect the grid tie inverter. You may have experience, when meet the big lightning, the power source of the home appliance may damage, same reason, will also cause the inverter damage, in this moment, the lightining protection can release thousand voltage to protect the inverter not damage. High speed AC fuse. We now provide access to the ac fuse from the outside of the inverter. Each inverter will come our special ac fuse. This will protect the inverter in less than a millisecond to help prevent high voltage. Spikes from feeding back into the circuitry! Grid Tie Power Inverter? When you use solar panel through grid tie inverter, your home power meter will reduce the speed(if you are using other electric appliances), or your home power meter will backward(if you are not use any appliances). The inverter can be connected to any outlet at home, when this line run by the conventional electric network. The inverter IC will monitors the volume, frequency and phase of the home grid, then produce a pure sine wave that the frequency and phase will be match the grid’s, and the volume will be higher than the grid’s, then according to our current controlled PWM, to control the output power to the grid. The inverter will puts out power when the home grid is on. Traditional grid tie inverter is the solar panel are connect in series, so if one solar panel did not work or bad efficiency, then the whole system will be effects, but power jack grid tie inverter, you can use every inverter in parallel, in this moment, each inverter has it’s own MPPT, can make every solar panel got the max power. Our grid tie inverter has 3greens light, when the charge fucntion is normal, then this 3lights will turn on, but if there are not dc sources(like in the night, no sun shine or raining day), the red led light will turn on, the inverter will stop to work, in this moment, the inverter will close the door, the home grid power will not back to inverter. When you set up the grid tie inverter. Pls put the AC plug first. After plug into the home ac source. Dont remove the plug anymore. Otherwise it may have hight voltage spikes. Then connect the DC input. When you want remove the grid tie inverter. Please take away the DC input first. Then you can remove the AC plug. Accessary: will including the AC power cord, DC cable will not including! Specification: 1200w grid tie power inverter 28v-48v. DC to 110v with LCD meter (with mppt function). DC 28-48v (solar panel). 23-27v red light flash. 28-48v, green flash, more larger output more faster. Over 48v, green light on. Less 23v, no light on and no output. No Load current Draw. Dimensions (L x W x H /cm). AC Output watt :0 Watt Max display power 15KW. Can display running power less than 1W. Total Operation time :0-60000 hours. 59 minutes to 24 hours to 2500 days. Fast, Reliably and Directly!! International Buyers Please Note. If you are satisfied with our product and service, pls kindly leave full stars good feedback for us. The item “2 IN 1 ON/OFF 1200W Grid Tie Power Inverter DC 28V-48V To AC 110V (28-48V Solar)” is in sale since Tuesday, December 06, 2016. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “powerinverter-onlinesale” and is located in USA. This item can be shipped to United States, to Canada, to United Kingdom, DK, RO, SK, BG, CZ, FI, HU, LV, LT, MT, EE, to Australia, GR, PT, CY, SI, to Japan, to China, SE, KR, ID, to Taiwan, ZA, TH, to Belgium, to France, to Hong Kong, to Ireland, to Netherlands, PL, to Spain, to Italy, to Germany, to Austria, RU, IL, to Mexico, to New Zealand, PH, SG, to Switzerland, NO, SA, UA, AE, QA, KW, BH, HR, MY, BR, CL, CO, CR, PA, TT, GT, HN, JM.
  • Brand: Unbranded/Generic
  • MPN: Does Not Apply
  • UPC: Does Not Apply

2 IN 1 ON/OFF 1200W Grid Tie Power Inverter DC 28V-48V To AC 110V (28-48V Solar)
Category: onoff | Comments Off