1000W 110V Grid Tie Inverter MPPT Pure Sine Wave Inverter & Power Cord

Description This grid tie inverter can effectively convert sunlight into clean green energy. It uses imported industrial electronic components, innovative MPPT technology and an isolated high-frequency transformer to make the efficiency higher than 99%, which is a more responsive, and higher output efficiency in photovoltaic power generation application systems. Its powerful output can effectively generate electricity for you. Key Features High-quality Material: The grid tie inverter is made of aluminum alloy, which is rust-free, heat-resistant, cold-resistant and anti-corrosion. It also uses imported industrial electronic components, which you can use for a long time. Environmental-friendly Choice: This grid tie inverter converts the direct current generated by the solar panel into alte. 1000W 110V Grid Tie Inverter MPPT Pure Sine Wave Inverter & Power Cord. 1000W MPPT Grid Tie Inverter MPPT Pure Sine Wave Inverter for 18V Solar Panel. This grid tie inverter can effectively convert sunlight into clean green energy. High-quality Material: The grid tie inverter is made of aluminum alloy, which is rust-free, heat-resistant, cold-resistant and anti-corrosion. Environmental-friendly Choice: This grid tie inverter converts the direct current generated by the solar panel into alternating current, providing an environment-friendly and pollution-free continuous energy source. High Efficiency: The product adopts a unique circuit design, imported industrial electronic components, isolated high-frequency transformer, and unique MPPT technology, with efficiency greater than 99%, so it can achieve sensitive response and more stable maximum power point locking. Pure Sine Wave: The grid tie inverter provides the same clean and pure sine wave output as the power supply. It can better protect sensitive devices, provide stronger driving ability, and lower power consumption. Safe and Secure: This product has a great electrical protection function. And the sturdy aluminum alloy shell can better prevent rainwater from eroding the surface, dropping and collision, so you can use it with confidence. Flexible Installation: The grid tie inverter adopts the modular design of parallel components, so you can conduct distributed installation according to your specific needs. Excellent Cooling Capacity: It is equipped with a high-speed intelligent cooling fan. When the temperature exceeds 45? /113°F, it will automatically start to work to prevent the inverter from overheating. Small Floor Space: The size of this grid tie inverter is only 10.66.52.1inch, which does not occupy much space and can even be installed in small stores. High Security: This grid tie inverter has passed the professional CE and RoHS certifications. In addition, it also has some core technology patents for electronic circuit design, appearance design and so on. Therefore, it is a trustworthy product. Simple Structure: Its structure is simple. Therefore, you only need to clean the dust on the grid tie inverter without disassembly and reassembly. Gaskets: The inverter is equipped with two gaskets to help you install the photovoltaic support, making the inverter more stable. Heat Dissipation Holes: The body has multiple heat dissipation holes, which help the machine to dissipate heat and enable it to run smoothly. It is very suitable for grid-connected power generation in schools, power stations and households. It is applicable to 18V solar panel and 24V battery. AC Output Power:1000W. Maximum AC Output Power:1050W. AC Output Voltage: 110V(AC 90V-140V). DC Input: DC10.8V-32V. Frequency Range: 48- 62Hz(Self-adaption). MPPT Range 15.5-22V. Scope of Application: 18V Solar Panel and 24V Battery. Package Size: 352010cm/13.87.93.9in. Product Size: 2116.55.3cm/10.66.52.1in. Gross Weight: 4kg/8.8lbs. Net Weight: 3.5kg/7.7lbs. 1 Set English Manual. All Accessories for Assembly. Please note that the input and output voltage must be within the voltage range of the product. Please note that the output port of the inverter must be connected to the household power grid socket (civil single-phase power grid) through an AC power line so that the product can work normally! Please note that the PV input power is recommended to be greater than 20% of the rated power of the product. Please note that the Vmp of the solar panel must be within the MPPT range to ensure the best MPPT maximum power output. We recommend using 18V photovoltaic panels (VOC voltage between 20-30V) or 24V batteries as input power to obtain better output power. Please note that the DC terminal must be tightened, otherwise, the product may be damaged. Please note that the grid tie inverter cannot be used as off grid/stand alone solar system. The output needs to be connected to the grid power. And it can not supply power directly to the AC loads. Please read the operating manual completely before use. And pay particular attention to the safety instructions included. Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “pinjishangwu02″ and is located in this country: US. This item can be shipped to United States.

Custom Bundle: No
Current Type: AC/DC
Features: Corrosion Resistant, All Daylight Conditions
Application: Home/Garden, Agriculture/Farming, Commercial, Irrigation
Charging Mode: MPPT (Maximum Power Point Tracking)
Power Source: Solar
Inverter Technology: Microinverter
Color: Silver
Brand: Unbranded
Recommended Environment: Indoor/Outdoor
System Configuration: Grid-Tie
Type: Charger/Inverter
Model: GTI1000W
Resistance Properties: Abrasion Resistant, Chemical Resistant, Corrosion Resistant
AC Output Power: 1000W
Material: Aluminium Alloy
Maximum AC Output Power: 1050W
AC Output Voltage: 110V(AC 90V-140V)
DC Input: DC10.8V-32V
Frequency Range: 48-62Hz(Self-adaption)
MPPT Range: 15.5-22V
Scope of Application: 18V Solar Panel and 24V Battery
Size: 21*16.5*5.3cm/10.6*6.5*2.1in

Category: 1000w | Comments Off

April 11

1000W Mirco Grid Tie Inverter110V For 24V/36V Solar Panel Pure Sine Wave With Cord

You may also like. Unique circuit design, choice of import industrial electronic components, higher efficiency, more stable performance. Creative MPPT technology, efficiency more than 99%, faster and more sensitive reaction, more reliable. Parallel type design for DC input and modularization design for inverter, small volume, distributed installation, easy for system configuration, flexible for combination, strong expansibility of system. Adopting high-frequency isolation transformer type, high efficiency, and high security. Perfect electrical protection function. Aluminum alloy housing, not rust, heat-resisting and cold-resistant as well as anti-corrosion. Getting electronic circuit design, appearance design and other core technology patents. Use For 24V/30V/36V Solar Panel 60cells/72cells. The Output can only be connected to the grid, CAN NOT connect to the ANY BATTERY, NOR CAN it connect to ANY HOUSEHOLD APPLIANCES. Check if the power grid voltage is in the usable range of the inverter, and make sure the output terminal of inverter have been connected to the home grid but not other appliances. Please confirm the working environment, the inverter is NOT WORKING when under environment like RAINY DAYS, in the EVENING or HIGH TEMPERATURE PROTECTION. Stop working/No power output. Check if the DC switch open. Check if the DC terminals have connected right. Check if the negative and positive terminals have connected right. Check if the DC input voltage is in the usable range of the inverter. Check if the power grid voltage is in the usable range of the inverter. Check if the DC fuse have blow. Check if the power grid connected right to the inverter. DC terminal connected right, but no power output. After starting working, the FAULT red LED is not bright and the ST green LED blinking in working condition. If the green LED blinking and there have no power output, there maybe be some parts broken inside. Please help send back the defective products to us for analyze the reason. After starting working, if the FAULT red LED is bright and the ST green LED have not blinking, there may be some parts broken inside. Stop working, No LED bright. Broken parts—–DC input fuse/DC mosfet. Please open the DC fuse cap and check the fuse if blow. Or you can use the multimeter: adjust the watch hand in the tap position of diode, if it accese, means the fuse is OK. If it open circuit, means the fuse is broken, need to change. Please open the inverter and take out the PCB, find the U2 stabilivolt, measure if there have 5V output. If have 5V output, maybe the CHIP broken. If have not 5V, maybe the U2 or Q6 broken, need to change. Find the RF2, RF3, RF4, RF5, RF6, RF9 6 mosfets. Adjust the multimeter watch hand in the tap position of diode, measure the D pole and S pole, the black pen connect to D pole, and the red pen connect to S pole, if the resistance is over 0.45, means the mosfet is ok. If the value of resistance is 0, means the mosfet is breakdown, need to change. LED display OK, but no power output. Broken parts—-AC mosfet/AC fuse. Please open the inverter and take out the PCB, find the RF7, RF8, RF17, RF18 4 mosfets, Adjust the multimeter watch hand in the tap position of diode, measure the D pole and S pole, the black pen connect to D pole, and the red pen connect to S pole, if the resistance is over 0.45, means the mosfet is ok. If the resistance is 0, means the mosfet is breakdown, need to change. Find the F1 fuse, adjust the multimeter watch hand in the tap position of resistance, if the value of resistance is below 10 Ohm, means it ok. If the value of resistance is infinity or no value, mean the F1 fuse breakdown, need to change. Good quality, good operation. Comes in a sealed package, ready to install. We will do everything we can to give you a satisfying solution. We do our best to resolve any issue. Leaving negative feedbacks and low ratings doesn’t get things solved. So please talk with us and we will not let you down. More chances to get what you want. For Solar Panel Pure Sine Wave W/ Cord 10.5-30V 300W Mirco Grid Tie Inverter New. New 22-50V 300W Mirco Grid Tie Inverter For Solar Panel Pure Sine Wave W/ Cord. The item “1000W Mirco Grid Tie Inverter110V For 24V/36V Solar Panel Pure Sine Wave With Cord” is in sale since Monday, January 28, 2019. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “welldone2018″ and is located in Chino, California. This item can be shipped to United States.

Brand: Unbranded
MPN: Does Not Apply
UPC: Does not apply

Category: 1000w | Comments Off

February 25

1000W Mirco Grid Tie Inverter110V For 24V/36V Solar Panel Pure Sine Wave With Cord

More chances to get what you want. 1000W Grid Tie Inverter 110V Use For 24V/36V Solar Panel Pure Sine Wave Inverter. You may also like. 1000W Mirco Grid Tie Inverter110V For 24V/36V Solar Panel Pure Sine Wave W/ Cord. Unique circuit design, choice of import industrial electronic components, higher efficiency, more stable performance. Creative MPPT technology, efficiency more than 99%, faster and more sensitive reaction, more reliable. Parallel type design for DC input and modularization design for inverter, small volume, distributed installation, easy for system configuration, flexible for combination, strong expansibility of system. Adopting high-frequency isolation transformer type, high efficiency, and high security. Perfect electrical protection function. Aluminum alloy housing, not rust, heat-resisting and cold-resistant as well as anti-corrosion. Getting electronic circuit design, appearance design and other core technology patents. This inverter only work with 12V Solar Panels(perfect compatible with Vmp18V), it CAN NOT be connected to ANY BATTERY as input source. The Output can only be connected to the grid, CAN NOT connect to the ANY BATTERY, NOR CAN it connect to ANY HOUSEHOLD APPLIANCES. Check if the power grid voltage is in the usable range of the inverter, and make sure the output terminal of inverter have been connected to the home grid but not other appliances. Please confirm the working environment, the inverter is NOT WORKING when under environment like RAINY DAYS, in the EVENING or HIGH TEMPERATURE PROTECTION. Stop working/No power output. Check if the DC switch open. Check if the DC terminals have connected right. Check if the negative and positive terminals have connected right. Check if the DC input voltage is in the usable range of the inverter. Check if the power grid voltage is in the usable range of the inverter. Check if the DC fuse have blow. Check if the power grid connected right to the inverter. DC terminal connected right, but no power output. After starting working, the FAULT red LED is not bright and the ST green LED blinking in working condition. If the green LED blinking and there have no power output, there maybe be some parts broken inside. Please help send back the defective products to us for analyze the reason. After starting working, if the FAULT red LED is bright and the ST green LED have not blinking, there may be some parts broken inside. Stop working, No LED bright. Broken parts—–DC input fuse/DC mosfet. Please open the DC fuse cap and check the fuse if blow. Or you can use the multimeter: adjust the watch hand in the tap position of diode, if it accese, means the fuse is OK. If it open circuit, means the fuse is broken, need to change. Please open the inverter and take out the PCB, find the U2 stabilivolt, measure if there have 5V output. If have 5V output, maybe the CHIP broken. If have not 5V, maybe the U2 or Q6 broken, need to change. Find the RF2, RF3, RF4, RF5, RF6, RF9 6 mosfets. Adjust the multimeter watch hand in the tap position of diode, measure the D pole and S pole, the black pen connect to D pole, and the red pen connect to S pole, if the resistance is over 0.45, means the mosfet is ok. If the value of resistance is 0, means the mosfet is breakdown, need to change. LED display OK, but no power output. Broken parts—-AC mosfet/AC fuse. Please open the inverter and take out the PCB, find the RF7, RF8, RF17, RF18 4 mosfets, Adjust the multimeter watch hand in the tap position of diode, measure the D pole and S pole, the black pen connect to D pole, and the red pen connect to S pole, if the resistance is over 0.45, means the mosfet is ok. If the resistance is 0, means the mosfet is breakdown, need to change. Find the F1 fuse, adjust the multimeter watch hand in the tap position of resistance, if the value of resistance is below 10 Ohm, means it ok. If the value of resistance is infinity or no value, mean the F1 fuse breakdown, need to change. Good quality, good operation. Comes in a sealed package, ready to install. We will do everything we can to give you a satisfying solution. We do our best to resolve any issue. Leaving negative feedbacks and low ratings doesn’t get things solved. So please talk with us and we will not let you down. The item “1000W Mirco Grid Tie Inverter110V For 24V/36V Solar Panel Pure Sine Wave With Cord” is in sale since Monday, January 28, 2019. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “east-small” and is located in Monroe Township, New Jersey. This item can be shipped to United States.

Brand: Unbranded
MPN: Does Not Apply
UPC: Does not apply

Category: 1000w | Comments Off

August 9

300/500/600/1000W Mirco Grid Tie Inverter For Solar Panel Pure Sine Wave With Cord

Unique circuit design, choice of import industrial electronic components, higher efficiency, more stable performance. Creative MPPT technology, efficiency more than 99%, faster and more sensitive reaction, more reliable. Parallel type design for DC input and modularization design for inverter, small volume, distributed installation, easy for system configuration, flexible for combination, strong expansibility of system. Adopting high-frequency isolation transformer type, high efficiency, and high security. Perfect electrical protection function. Aluminum alloy housing, not rust, heat-resisting and cold-resistant as well as anti-corrosion. Getting electronic circuit design, appearance desi.. 300/500/600/1000W Mirco Grid Tie Inverter For Solar Panel Pure Sine Wave W/ Cord. Getting electronic circuit design, appearance design and other core technology patents. 16.4x 15.5×5.3cm. 1 x Grid Tie Inverter. 1 x Users Manaul. 1 x US AC Cord. We are not responsible for any loss in transit if a wrong address is provided. We are continually expanding our product selection to better serve your need. We look forward to providing the best sevice to you – our dear customers, so take a look around our store and find the product that you want. You can put your trust in us! We strive to provide 5 STAR Feedback. If you think we are lacking in any important feedback categories, please be sure to tell us, so we have an opportunity to improve our performance. The item “300/500/600/1000W Mirco Grid Tie Inverter For Solar Panel Pure Sine Wave With Cord” is in sale since Thursday, June 22, 2017. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “ausluna0001″ and is located in United States. This item can be shipped to United States.

Brand: Unbranded
MPN: Does Not Apply

Category: 3005006001000w | Comments Off

November 2024
M	T	W	T	F	S	S
« Oct
				1	2	3
4	5	6	7	8	9	10
11	12	13	14	15	16	17
18	19	20	21	22	23	24
25	26	27	28	29	30