SUN 1000W Solar Grid Tie Inverter with Limiter Sensor Wi-Fi DC 22-65V

This powerful SUN 1000W Grid Tie Inverter is the perfect solution for anyone looking to harness the power of the wind. Equipped with advanced features like an LCD display, smart module, Wi-Fi port, and automatic voltage detection, this inverter is both easy to use and highly efficient. Its maintenance-free design and hybrid inverter technology make it a reliable choice for anyone looking to reduce their dependence on traditional power sources. Whether you’re powering a shed, a municipal building, or your own home, this inverter is the ideal choice for all your power needs. How does an inverter with limiter work? If you use a limiter on the inverter, you get a system without overflows to the distribution network. A grid-tied inverter converts the constantly varying AC Wind power and feeds it into the grid. It synchronizes the frequency and the output voltage to its connected grid. When the wind energy increases, the inverter output increases too, injecting into the grid. The picture of the one on the wall it the 220vac version that I’m using at home. Includes: Inverter, Limiter Sensor, WiFi Module (QR code for software), Dumpload Resistor w/ mounting hardware, 110vac Power Chord.

Category: 1000w | Comments Off

April 20

1000W 3 Phase Wind Turbine Grid Tie Inverter Limiter DC 22-65V 45-90V SUN WAL

New Grid Tie Inverter for 3 Phase Wind Turbines. Built-in Dump Load Controller – three phase AC input from wind turbine – Single Phase AC to Grid (100V 110V 120V 220V 230V 240V) – Built-in Power Limit Function. About the Input Voltage. DC 22-65V or 45-90V The DC input range of the wind inverter, the test point should be at the DC side of the built-in rectifier of the inverter, but you can calculate from 3 phases of AC output voltage of the wind turbine to get the DC voltage, the formula is Vac = Vdc/1.732. For example, if the DC input voltage range of the inverter is 4590V, then the wind turbine’s output AC range of the should be 45/1.73290/1.732 = AC 26V 52V. The wind inverter must work with 3 phase AC model wind turbine, there should be 3 wires from the wind turbine. Another way, if the wind turbine is used to charge 24v battery, please select 22-65V inverter. If the wind turbine is used to charge 48v battery, and the highest voltage low than 65v, please select 22-65V inverter. If the 48v wind turbine highest voltage over 65v, and low than 90v, please select 45-90V inverter. Advantage Features of the 2G Wind Power Grid Tie Inverter. The 2nd Generation grid tie inverter, new technical, Higher efficiency. Higher MPPT efficiency, Max 99% Multiple intelligent protection to ensure safe use. Directly connect to three phase wind turbine, without regulator Easy to install and easy to operate. The Electric meter will SLOW down. The wind grid tie power inverter can obtain the wind energy from wind turbine, and can tie to the grid through its output cables with no extra equipment. The installation is very convenient and reliable. The inverter can be connected to any outlets of utility grid at house. The small grid tie inverter monitors the volume, frequency and phase of the home utility grid, then produce pure sine wave AC power that the frequency and phase are as same as the grid’s, and the volume is a bit higher than the grid’s, then according to the current controlled PWM, to control the output power to the grid. The small grid tie inverter just puts out power when the home grid is on. When the wind turbine is rotating, and the output of the voltage is in the range of the rated input voltage of the inverter, the wind turbine will produces power, and the grid tie inverter will change the power from wind turbine to the home grid. When the total power of electric apparatus that are using in the house is larger than the output power of the inverters, these power from the inverters will be consumed in the house, this will slow down the power meter, otherwise, the difference of the output power of the inverter between the total used power of the apparatus will go out from the house to the out grid. Why our grid tie inverters need limit function? — It is in response to the overwhelming clamor from our customers for a function that can control the amount of power that the grid tie inverters can generate. With this function, the inverters will just generate power that is not larger than the loads’ power even the inverters are connected with big power solar panel array, we call it “limit function”. Because in some countries, the producer pays for the excess power it gives to the distribution grid. This is because the electric power meter(the one provided by the electricity provider in the area) is not aware of the direction of power flow. In other words it only adds even if power is exported to the grid, thus, the consumer will be charged for power even if it is given to the grid, and this is the problem. Our SUN G2 series grid tie inverters are integrated this limit function, so SUN G2 series inverters can work in limit mode or normal mode(no limit), you can make the configuration on the LCD display. Power Output : 1000W Input AC/DC Voltage Range : 22v 60V or 45V 90V AC Output Voltage Range : 95-140VAC /185-265VAC Output Frequency : 46Hz65Hz Standby Power Consumption. Wind power grid tie inverter —- 1pcs, 2. Dump load resistor —1pcs, 3. AC cable –1pcs , 4. Limiter sensor/clamp / cable —- optional. Q: Can this inverter work if power off? Grid tie inverter will stop to work if the grid is off. Q :Can this inverter be connected in Parallel? A : Yes, the grid tie inverter is stackable. You may connect two or more inverters to one big wind turbine.

Category: 1000w | Comments Off

April 28

1000W Solar Grid Tie Inverter Limiter DC 22-65V 45-90V AC 110V 120V 220V 230V @

1000W Solar Power Grid Tie Inverter with Limiter. Easy installation, Can be paralleled on AC side. Nice LCD display various parameters including input voltage, output power, temperature, power curve, output sine wave- form etc. Can be integrated with internal limit function. Battery discharge power mode enabled, Can auto regulate depth of discharge of the battery bank. RS485 extended interface serviceable. Standard Grid Tie Inverter. The Grid Tie inverter converts DC power produced by Solar Panels to AC, connects to the grid and feed all of the power available from the panels to the AC load. Power Limit Function-Stop to send excess power to the grid. When the inverter is working, all excess power that is not needed by the load is then exported to the Grid. Electric meters (except smart meter) are not aware of the direction of Power flow. The user then pays for the power exported and delivered by the Grid. The Grid Tie Inverter with Limiter delivers only the power needed by the load and prevents delivering excess power hence avoids excess power in going back to the Grid. Most of the time, more electricity is used at night. Solar panels work only during the day when there is sunlight. User can use battery instead of solar panels. The system will work the whole day. User can set the battery discharge voltage and reboot voltage. The system will work automatically. Monitor the operating status of the inverter in mobile applications. Technical Parameter Data Sheet. Input DC Voltage Range. Peak power tracking voltage. AC Output Voltage Range. User Manual Down Load. Certifications : CE, VDE-0126, EN50438. Q:Can this device charge a battery? A: No, it accepts battery input. But it can not charge a battery. Q:Can I install more than one inverters in my house? A: Yes, the grid tie inverters can be installed in Parallel. Q: How long is the limiter sensor/clamp cable? Thanks for your kindly understand. We are committed to resolve all issues in a friendly and satisfactory manner. We care about our valued buyers, if you have any questions, our Customer Service staffs will be very glad to help you. We try our best to reply to your emails as soon as possible, however, due to high volume of daily incoming emails and time zone difference, we may not be able to reply your emails immediately. Your recognition will make us more confident to develop business and serve you better. We understand the concerns and frustrations you might have, and will do our endeavor to resolve the issues. Please give us the opportunity to resolve any problem. Here is illustration shows how to leave me the feedback, please follow the step, thank you very much! And hope to see you soon. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “maxiaowei2012″ and is located in this country: CN. This item can be shipped worldwide.

Limiter Sensor:: Add Sensor
Wi-Fi Port:: with WiFi Port
Input Voltage:: DC 22-65V
Model: SUN-1000GTIL-LCD
Custom Bundle: No
Type: Charger/Inverter
Color: Blue
Brand: Unbranded
Current Rating: 21-30 A
Inverter Technology: Microinverter
Country/Region of Manufacture: China
Wattage: 900-999 W
Current Type: DC
System Configuration: Grid-Tie
Maximum Input Voltage: 81-90 V
Power Source: Solar
Features: Automatic Voltage Detection, LCD Display, Wi-Fi Port
Protection Properties: Low Voltage Protection, Overcurrent Protection, Overload Protection
Power: 901-1000 W
Current Output: 10 A or Less
Voltage:: 22-65V or 45-90V
Application:: Home/Garden
MPN:: SUN-1000GTIL-LCD
Recommended Environment:: Indoor
Charging Mode:: MPPT (Maximum Power Point Tracking)
Resistance Properties:: Heat Resistant

Category: 1000w | Comments Off

May 21

Solar Grid Tie Inverter MPPT DC 22-65V 45-90V AC 220v 230v 240v Limiter System

Solar Grid Tie Inverter MPPT DC 22-65V 45-90V AC 220v 230v 240v Limiter System. 1000w Grid Tie Inverter for Solar Panels or Battery. Working well with all kinds of Battery. With internal Limiter / Wi-Fi connection. Limiter sensor clamp Wi-Fi port (optional). Input voltage Range : DC 22V-60V or 45V-90V (optional). Output Voltage : AC 110V 120V 220V 230V 240V (automaticly). Why we produced the GRID TIE INVERTER WITH LIMITER? It is in response to the overwhelming clamor from our customers for a product that can control the amount of power that the grid tie inverters (GTI) can generate so that the amount of excess power produced by the solar panels are reduced to insignificant levels, if not eliminated — because in some countries, the producer pays for the excess power it gives to the distribution grid. This is because the electric power meters (the one provided by the electricity provider in the area) are not aware of the direction of power flow. In other words it only adds even if power is exported to the grid, thus, the consumers will be charged for power even if it is given to the grid, and this is the problem. This is the 2nd generation grid tie inverter with limiter. But in case customer install inverter far away from the main circuit breaker, we also enable the 2nd GTIL work with stand-alone limiter, we call this-external limiter. For sure, the inverter can work under normal Grid tie-no limit mode, just set on the nice LCD and save your setting. New upgraded firmware enable battery or solar limiter current and power model. User can set the maximum output power of inverter, this can make the inverter work at cooler contition as user want and extend the lifespan of the inverter. User can set kick in/off voltage of the inverter which can flexible using with battery bank depend on users mind and can prevent battery bank from over discharged. Wi-Fi Function for monitor the solar plant on App or Website. Product description : NOTE : this WIFI port must be ordered with 2nd Generation Grid Tie Inverters together. NOTE : It will be built-in side the inverter. Input DC Voltage Range. Peak power tracking voltage. AC Output Voltage Range. Dimensions (W x H x D). Solar Grid Inverter with Limiter(built-in)—–1unit B. AC cable————-1 pcs C. Limiter sensor clamp & 2m cable (optional) —-1pcs D. Wi-Fi port (optional /Black color one) —-1pcs. How to use the Inverter? Standard Grid Tie Inverter Model. The Grid Tie inverter converts DC power produced by Solar Panels to AC, connects to the grid and feed all of the power available from the panels to the AC load. All excess power that is not needed by the load is then exported to the Grid. If the Grid fails, then the Grid Tie Inverter will turn off. When the Grid comes back on line. The Grid Tie Inverter will again supply power to the load and any excess power is exported to the Grid again. If the Solar Panel is producing less power and the GTI cannot deliver all the power needed by the load, then power will be supplemented by the Grid. Power Meters (Except smart meter) are not aware of the direction of Power flow. The user then pays for the power exported and delivered by the Grid. Using Grid Tie Inverter With Limiter Model. 2.1 The Grid Tie Inverter with Limiter delivers only the power needed by the load and prevents delivering excess power hence avoids excess power in going back to the Grid. 2.2 The heart of the Grid Tie Inverter with Limiter is the Limiter Module (LM). The LM continuously sampled the power needed by the load through the current sensor connected after the Main Circuit Breaker. The LM then will process the signal. It then sends signal to Grid Tie Inverter how much power to deliver to the load in real time. 2.3 The user, after installing and connecting the GTIL correctly, need not do anything and the unit will do its work automatically. Installation of GTIL With Internal Limiter. 3.1 This installation is not require an additional limiter module, Installation is much easier. Clamp the current sensor cable to the hot wire to measure the current, the internal limiter will auto detect the load power and control the inverter output power, excess power will be well controlled. 3.2 External protective device including dc and ac SPD(Surge protection device), dc and ac breaker, etc is recommended to installed in the system. Limiter Setting on the LCD of the inverter: The GTIL include three working mode:Work as normal GTI without power limitation. Work under Internal limiter mode and Work under External limiter mode, Pls make your setting on the LCD and save it, details setting operation, pls read the GTI manual. 5 Battery Discharge Power Mode New upgraded firmware enable battery or solar limiter current and power model. 6 Limiter Module Specification 1. Clamp sensor- Max 100A 2. Wattmeter- Max 9999w 3. Terminal Block-Max 20A 4. Receptacle- max 2000w 5. Clamp sensor signal- 5v AC max mA 6. DC signal Cable- 5v DC, max mA 7. Max 13mm or 0.51in cable. There may be some delays due to flight, holiday, weather, local post, local natural disaster impact. It must also be in the original packaging. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “rodonite-7″ and is located in this country: CN. This item can be shipped worldwide.

Color: DC 22V 65V
Size: 322x196x88mm
Current Rating: Other
Inverter Technology: Microinverter
Model: 4206381759
Country/Region of Manufacture: China
Maximum Input Power: Other
Weight: 3.6kg
Custom Bundle: No
Input Voltage: 22-65vdc/45-90vdc
Current Type: AC/DC
Product Line: Solar Grid Tie Inverter MPPT DC 22-65V 45-90V AC 2
System Configuration: Grid-Tie
Material: Other
Maximum Input Voltage: 240V
Power Source: Solar
Type: Charger/Inverter
Features: Durable
MPN: 4206381783
Recommended Environment: Indoor/Outdoor
Item Length: Standard
Protection Properties: Other
Power: 1000W
Current Output: 10A
Brand: Unbranded
Application: Agriculture/Farming, Home/Garden
Charging Mode: MPPT (Maximum Power Point Tracking)
Is_customized: Yes
Output Current: 10A
Output Frequency: 50hz 60hz auto
Output Power: 500 – 1000W
Output Type: Single
Output Voltage: 90v-140v / 185v-265v
Stackable: Yes
Resistance Properties: Other
Voltage: DC 22-65V 45-90V AC 220v 230v 240v

Category: solar | Comments Off

January 9

1000W Solar Grid Tie Inverter Limiter DC 22-65V 45-90V AC 110V 120V 220V 230V

With Limiter: Yes
with WIFI Plug: Yes
DC input Voltage: DC 22-65V
Model: SUN1000G2
Current Type: DC
System Configuration: Grid-Tie
Type: On Grid Tie Solar Inverter
Brand: TINGEN
Application: Home/Garden
Charging Mode: MPPT (Maximum Power Point Tracking)
Voltage: DC22-65V / DC45-90V

Category: 1000w | Comments Off

December 21

Pair of used Eco-worthy 1000W Solar Power Grid Tie Inverter MPPT DC 22-65v

Pair(2 inverters)of used Eco-worthy 1000W Solar Power Grid Tie Inverter MPPT DC 22-65v. The item “Pair of used Eco-worthy 1000W Solar Power Grid Tie Inverter MPPT DC 22-65v” is in sale since Monday, December 20, 2021. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “jaimejoel” and is located in Jacksonville, Florida. This item can be shipped to United States.

Current Type: DC
Power Source: Wind
MPN: L030202010021
Brand: Eco-worthy
System Configuration: Grid-Tie
Model: L03020201002-1
Resistance Properties: Waterproof

Category: pair | Comments Off

May 7

1000W Solar Grid Tie Inverter Limiter DC 22-65V 45-90V AC 110V 120V 220V 230V

Country/Region of Manufacture: Austria
Brand: DC
Product Type: CD

Category: 1000w | Comments Off

April 25

SUN GTIL 1000W Solar Grid Tie Inverter DC 22-65V AC 110V 120V 220V 230V

Upgraded 14 AWG plug-in cable included. Optional current transformer and Wifi plug can be added for additional functions. Automatic Voltage Detection, LCD Display, Wi-Fi Port. Low Voltage Protection, Overcurrent Protection, Overload Protection. MPPT (Maximum Power Point Tracking). The item “SUN GTIL 1000W Solar Grid Tie Inverter DC 22-65V AC 110V 120V 220V 230V” is in sale since Thursday, April 22, 2021. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “1015286969” and is located in Richmond Hill, Ontario. This item can be shipped worldwide.

Current Rating: 21-30 A
Inverter Technology: Microinverter
Model: SUN-1000GTIL-LCD
Country/Region of Manufacture: China
Custom Bundle: No
Wattage: 900-999 W
Current Type: DC
System Configuration: Grid-Tie
Maximum Input Voltage: 65V
Power Source: Solar
Type: Charger/Inverter
Features: Automatic Voltage Detection
Color: Blue
Recommended Environment: Indoor
Protection Properties: Low Voltage Protection
Power: 901-1000 W
Current Output: 10 A or Less
Brand: SUN
Application: Home/Garden
Charging Mode: MPPT (Maximum Power Point Tracking)
Resistance Properties: Heat Resistant
Voltage: 22-65V

Category: gtil | Comments Off

March 13

1000w Solar Power Grid Tie Inverter with Limiter sensor Wifi Plug DC 22-65V

You may also like. 1000w Solar Power Grid Tie Inverter with Limiter sensor Wifi Plug DC 22-65V. Specifications: –1000W MAX power. AC 110V 120V 220V 230V 240V (auto selected). With Battery Discharge Function / Voltage Adjustable. Limiter sensor and clamp 2mters cable. When the sun shines, the solar panels will produces DC voltage, and the grid tie inverter will change the DC voltage to AC voltage and puts out power to the home grid. The electric apparatus in the house will use power from the inverter first. The power meter will SLOW down. If the Solar Panel is producing less power and the GTI cannot deliver all the power needed by the load, then power will be supplemented by the Grid. Power Meters (Except smart meter) are not aware of the direction of Power flow. The user then pays for the power exported and delivered by the Grid. We have the limiter type inverters. If you do not want to sell electric power. Input DC Voltage Range. Peak power tracking voltage. AC Output Voltage Range. Dimensions (W x H x D). The 22-65V model inverter will start up at 25V, after starting, the inverter can work in 22V-65V. Vmp 30v-60v Solar panels connected in Parallel suggested, for example : 4 pcs 200-260w (Vmp 31v solar panels in parallel). Solar Grid Inverter with Limiter(built-in). Internal type Limiter clamp with sensor & 2m cable. 1 unit inverter installation / more units inverters in parallel. The inverter AC output can be connected in the AC plug of grid in the house. Optional Function : Wi-Fi port. Higher MPPT efficiency , Max 99%. My goal is to make sure you are happy and having the pleasant shopping with us. Yueqing Reliable Electric Is a leading company in the development, manufacturing and marketing of advanced power inverter and systems for mobile power markets and PV industry since 2009. The company’s power inverters convert and control raw electrical power from any renewable or back up ower source into high quality pure sine wave power. Our product range from off grid high frequency pure sine wave inverter (150W to 8000W) and grid tie inverter (200W to 2000W). Most of them are hot products in the market such as. High frequency pure sine wave inverter up to 8000w with stable performance, with LED and LCD display; 2. High advanced LCD display 2000w grid tie inverter with 45-90vdc input. Build-in dump load for small grid PV system 3. The highly compact designed micro inverter for 0.82kgs with power line carrier-current communication, it can built up a megawatt solar power station. Our pure sine wave inverters meet the needs of a wide range of application such as for vehicle , marine, train or any mobile power station. The special DC volt 36V, 72V , 96V, 110VDC ect can be selected for special application. The pure sine wave inverter products are certified to EMC testing in Australia and CE FCC, RoHS, approved. Reliable Electric is identified as one of the most famous trademarks in China for pure sine wave inverter for its relaible power inverter, reasonable price and responsible service. Reliable electric is committed to improving the environment and the renewable energy industry and continues to develop more efficient and cost-effective solutions to bring more green electricity to our lives. Any questions will be replied within 24 hours except the weekend and statuary holiday in Chinese Beijing Time. The item “1000w Solar Power Grid Tie Inverter with Limiter sensor Wifi Plug DC 22-65V” is in sale since Friday, December 11, 2020. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “reliablepower” and is located in Yueqing, Zhejiang. This item can be shipped worldwide.

Model: Grid tie inverter
Country/Region of Manufacture: China
Wattage: 1000
System Configuration: Grid-Tie
Power Source: Solar
Type: Grid Tie Inverter
Features: Solar
Color: Blue
MPN: GTI1000241224WI
Recommended Environment: Indoor/Outdoor
Protection Properties: Anti-Island Protection
Power: 901-1000 W
Brand: WZRELB
Application: Agriculture/Farming
Featured Refinements: Grid Tie Inverter
Energy Type: Solar
RMS Power: 1000W
Interface: Wi-Fi
Voltage: 36 V

Category: 1000w | Comments Off

December 14

1000W 3 Phase Wind Turbine Grid Tie Inverter Limiter DC 22-65V 45-90V SUN WAL

New Grid Tie Inverter for 3 Phase Wind Turbines. Built-in Dump Load Controller – three phase AC input from wind turbine – Single Phase AC to Grid (100V 110V 120V 220V 230V 240V) – Built-in Power Limit Function. About the Input Voltage. DC 22-65V or 45-90V The DC input range of the wind inverter , the test point should be at the DC side of the built-in rectifier of the inverter, but you can calculate from 3 phases of AC output voltage of the wind turbine to get the DC voltage, the formula is Vac = Vdc/1.732. For example, if the DC input voltage range of the inverter is 4590V, then the wind turbine’s output AC range of the should be 45/1.73290/1.732 = AC 26V 52V. The wind inverter must work with 3 phase AC model wind turbine , there should be 3 wires from the wind turbine. Another way , if the wind turbine is used to charge 24v battery , please select 22-65V inverter. If the wind turbine is used to charge 48v battery , and the highest voltage low than 65v , please select 22-65V inverter. If the 48v wind turbine highest voltage over 65v , and low than 90v , please select 45-90V inverter. Advantage Features of the 2G Wind Power Grid Tie Inverter. The 2nd Generation grid tie inverter, new technical , Higher efficiency. Higher MPPT efficiency , Max 99% Multiple intelligent protection to ensure safe use. Directly connect to three phase wind turbine, without regulator Easy to install and easy to operate. The Electric meter will SLOW down. The wind grid tie power inverter can obtain the wind energy from wind turbine, and can tie to the grid through its output cables with no extra equipment. The installation is very convenient and reliable. The inverter can be connected to any outlets of utility grid at house. The small grid tie inverter monitors the volume, frequency and phase of the home utility grid, then produce pure sine wave AC power that the frequency and phase are as same as the grid’s, and the volume is a bit higher than the grid’s, then according to the current controlled PWM, to control the output power to the grid. The small grid tie inverter just puts out power when the home grid is on. When the wind turbine is rotating, and the output of the voltage is in the range of the rated input voltage of the inverter, the wind turbine will produces power, and the grid tie inverter will change the power from wind turbine to the home grid. When the total power of electric apparatus that are using in the house is larger than the output power of the inverters, these power from the inverters will be consumed in the house, this will slow down the power meter, otherwise, the difference of the output power of the inverter between the total used power of the apparatus will go out from the house to the out grid. Why our grid tie inverters need limit function? — It is in response to the overwhelming clamor from our customers for a function that can control the amount of power that the grid tie inverters can generate. With this function, the inverters will just generate power that is not larger than the loads power even the inverters are connected with big power solar panel array, we call it limit function. Because in some countries, the producer pays for the excess power it gives to the distribution grid. This is because the electric power meter(the one provided by the electricity provider in the area) is not aware of the direction of power flow. In other words it only adds even if power is exported to the grid, thus, the consumer will be charged for power even if it is given to the grid, and this is the problem. Our SUN G2 series grid tie inverters are integrated this limit function, so SUN G2 series inverters can work in limit mode or normal mode(no limit), you can make the configuration on the LCD display. Power Output : 1000W Input AC/DC Voltage Range : 22v 60V or 45V 90V AC Output Voltage Range : 95-140VAC /185-265VAC Output Frequency : 46Hz65Hz Standby Power Consumption. Wind power grid tie inverter —- 1pcs , 2. Dump load resistor —1pcs , 3. AC cable –1pcs , 4. Limiter sensor/clamp / cable —- optional. Q: Can this inverter work if power off? Grid tie inverter will stop to work if the grid is off. Q :Can this inverter be connected in Parallel? A : Yes, the grid tie inverter is stackable. You may connect two or more inverters to one big wind turbine. The item “1000W 3 Phase Wind Turbine Grid Tie Inverter Limiter DC 22-65V 45-90V SUN WAL” is in sale since Monday, September 14, 2020. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “ming721″ and is located in NingBo. This item can be shipped to North, South, or Latin America, all countries in Europe, Australia.

Current Rating: 21-30 A
Model: SUN-1000GTIL-WAL LCD
Current Type: DC
System Configuration: Grid-Tie
Power Source: Wind
Type: Charger/Inverter
Features: Automatic Voltage Detection
MPN: SUN-1000GTIL-WAL LCD
Power: 901-1000 W
Current Output: 10 A or Less
Brand: SUN
Application: Home/Garden
Charging Mode: MPPT (Maximum Power Point Tracking)
Voltage: 45-90V/22-65V

Category: 1000w | Comments Off

November 2024
M	T	W	T	F	S	S
« Oct
				1	2	3
4	5	6	7	8	9	10
11	12	13	14	15	16	17
18	19	20	21	22	23	24
25	26	27	28	29	30