Wind Power Microinverter MPPT 1000W Grid Tie 3 Phrase Inverter Pure Sine Wave AC

Wind Power Microinverter MPPT 1000W Grid Tie 3 Phrase Inverter Pure Sine Wave AC. The Advantage of Inverter. Advanced patented technology, MPPT efficiency is higher. High-quality imported components, more stable quality, lower failure rate. Significantly longer life, more than 10 years. Each inverter need to pass twice testing (20 hours) before leaving factory. Low cost and easy installation. Combination of SGPV does not interact. Improving the efficiency of the entire solar power system. Why we produced the GRID TIE INVERTER WITH LIMITER? It is in response to the overwhelming clamor from our customers for a product that can control the amount of power that the rid tie inverters (GTI) can generate so that the amount of excess power produced by the solar panels are reduced to insignificant levels, if not eliminated — because in some countries, the producer pays for the excess power it gives to the distribution grid. This is because the electric power meters (the one provided by the electricity provider in the area) are not aware of the direction of power flow. In other words it only adds even if power is exported to the grid, thus, the consumers will be charged for power even if it is given to the grid, and this is the problem. 22-65V/45-90VAC (24v Or 48V AC Wind Turbine). Max input DC voltage. Peak power tracking voltage. 47.5-51.5 for 50hz; 59.3-60.5 for 60hz. Just for AC output. 20’C — +85’C. Layout of Sunshine Grid Tie Power Inverter. Dump load resistor connection Terminal. This terminals will connect to the dump load resistor. AC socket, This socket will connect the inverter to the public grid via the AC cable. This terminals will connect to the wind turbine. Choosing a suitable dump load resistor. Because SUN series grid tie inverter for wind turbine has built in dump load controller, so the inverter can connect with dump load resistor directly. There are two terminals for dump load resistor connection on the panel of the inverter. Different model of grid tie inverter need to connect with different type of dump load resistor, We will send you the applicable resistors according to the inverter model you ordered. The connecting drawing of “SGWT”. WDL model of SUN series grid tie inverter connected with AC output type of wind turbine. BWAL model of SUN series grid tie inverter connected with AC output type of wind turbine. Power is 2KW wind turbine. Installing Sunshine Grid Tie Power System to Three Phases Utility Grid. When the Capacity of Gird Tie Power System is larger, install all the power system to one phase of the utility grid is not reasonable, maybe this will cause unbalance of the three phase of the utility grid. In this section, we will explain how to install Sunshine Power System to three phases utility grid separately in order to balance the fed power. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “myincast” and is located in this country: CN. This item can be shipped worldwide.

Color: With Wifi Modem
Input Voltage: 22V-60V
System Configuration: Grid-Tie
Current Type: AC
Power Source: Wind
Inverter Technology: Microinverter
Current Output: Standard
Size: 322x196x88mm
Custom Bundle: No
Wattage: Standard
Maximum Flow Rate: Standard
MPN: 9794893743
Item Length: Standard
Wire Gauge: Standard
Voltage: 45-90V
Connector Type: Other
Features: All Daylight Conditions, Automatic Voltage Detection
Protection Properties: Other
Maximum Input Power: Standard
Maximum Input Voltage: 60V/90V
Current Rating: 11-20 A
Material: Nylon Fiber
Brand: Unbranded
Type: Charger/Inverter
Connector Configuration: Other
Model: 9794893718
Recommended Environment: Indoor/Outdoor
Charging Mode: MPPT (Maximum Power Point Tracking)
Resistance Properties: Dustproof, Dust Resistant
Country/Region of Manufacture: China
Application: Agriculture/Farming
Power: 1000W
Product Line: Wind Power Microinverter

Category: wind | Comments Off

October 15

1000W 1200W Solar Grid Tie Inverter DC 24-72V 48-96V AC 110V 220V With Limiter

1000W solar grid-connected dual-purpose inverter (with limiter) WiFi model. 1200W solar grid-connected dual-purpose inverter (with limiter) WiFi model. 1000W solar on-grid dual-purpose inverter (with limiter) without WiFi. 1200W solar on-grid dual-purpose inverter (with limiter) without WiFi. Easy installation, can be connected in parallel on the AC side. Color LCD – can switch between Chinese and English to display various parameters. Wifi wireless communication expansion interface, the inverter power generation data can be collected through the wifi plug, and monitored on the PC webpage or mobile APP. Including: input voltage, output power, temperature, power curve, output sinusoidal waveform, etc. Internal limit function can be integrated. The battery discharge power mode is enabled, which automatically adjusts the depth of discharge of the battery pack. The Grid Tie Inverter converts the DC power produced by the solar panels to AC power, connects to the grid and feeds all available power from the solar panels to the AC load. Grid-connected mode: It must be connected to the public grid during. Installation, which is to connect the solar panel, the home electricity grid and the public grid (it is recommended to use it when the public grid is stable). Advantages: Compared with the off-grid mode, the grid-connected system is more stable and durable in connection with the public grid, and there is no need to install an additional power storage system, which can save the cost of installing a power storage system. Disadvantages: This is a power generation system that must rely on the existing grid to operate, and the electricity generated cannot be stored (a storage system can also be installed to store excess electricity generated by solar energy). Advantages: This power generation system is widely used because it is not limited by geographical areas. It can be installed and used as long as there is sunlight, so it is very suitable for remote areas without power grids, isolated islands, fishing boats, outdoor breeding bases, etc. It can also be used as a Emergency power generation equipment in areas with frequent power outages. 1000W MPPT solar grid-connected inverter, 4 kinds of DC input voltage specifications are optional. PV-voc voltage range: 26V45V or 24v battery. PV-voc voltage range: 40V-60V or 36v battery. PV-voc voltage range: 55V-90V or 48v battery. PV-voc voltage range: 85V-130V or 72v battery. 1200W MPPT solar grid-connected inverter, 3 kinds of DC input voltage. PV-voc voltage range: 55V90V or 48V battery. PV-voc voltage range: 80V-125V or 72V battery. PV-voc voltage range: 120V-180V or 96V battery. How to connect the sensor? Connect the RS485 line of the AC energy collection meter to the 485 port of the inverter. Insert the terminal of the transmission current sensor into the collector “CT-IN” port (no +-). Connect the AC power port “AC-IN” of the collector to the same AC power supply of the load. Once connected, it will light up. In the inverter LCD, enter “Battery Grid”, by SET {Bat AutoLimit Grid}. The inverter is connected to AC first, and then to the battery, and the inverter will automatically output the same power as the electricity detected by the collector. Therefore, the inverter will not have excess energy fed into the grid (ie: automatic limiter function). One collection meter can connect 10 grid-connected inverters. There are 4 modes. PV mode/PV limit mode/battery constant power mode/battery limit mode. 1000W/1200W solar grid-connected inverter (with limiter) WiFi model. (Note: This model has no display screen, any relevant parameters can be viewed through the APP, no display screen). 1000W/1200W solar grid-connected inverter (with limiter) without WiFi. (Note: This model has a display screen, any relevant parameters can be viewed through the display screen, no WiFi mode). This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “possbay2011″ and is located in this country: CN. This item can be shipped to United States, Canada, United Kingdom, Mexico, Germany, Japan, Brazil, France, Australia.

Wattages: 1000W
Output voltages: 220V
Input voltages: 48V
Brand: Unbranded
System Configuration: Grid-Tie
Type: Charger/Inverter
Charging Mode: MPPT (Maximum Power Point Tracking)
Features: Freestanding, Automatic Voltage Detection, Wi-Fi Port, With Limiter
Application: Automotive, Electronics, Commercial, Home/Garden
Voltage: 11-20 V
Power: 901-1000 W
Power Source: Solar
Inverter Technology: Microinverter
Wattage: 900-999 W
Color: Blue
Custom Bundle: No
Colour: Blue

Category: 1000w | Comments Off

October 12

1000W 1200W Solar Grid Tie Inverter With Limiter DC 24-72V 48-96V AC 110V 220V

1000W solar grid-connected dual-purpose inverter (with limiter) WiFi model. 1200W solar grid-connected dual-purpose inverter (with limiter) WiFi model. 1000W solar on-grid dual-purpose inverter (with limiter) without WiFi. 1200W solar on-grid dual-purpose inverter (with limiter) without WiFi. Easy installation, can be connected in parallel on the AC side. Color LCD – can switch between Chinese and English to display various parameters. Wifi wireless communication expansion interface, the inverter power generation data can be collected through the wifi plug, and monitored on the PC webpage or mobile APP. Including: input voltage, output power, temperature, power curve, output sinusoidal waveform, etc. Internal limit function can be integrated. The battery discharge power mode is enabled, which automatically adjusts the depth of discharge of the battery pack. The Grid Tie Inverter converts the DC power produced by the solar panels to AC power, connects to the grid and feeds all available power from the solar panels to the AC load. Grid-connected mode: It must be connected to the public grid during. Installation, which is to connect the solar panel, the home electricity grid and the public grid (it is recommended to use it when the public grid is stable). Advantages: Compared with the off-grid mode, the grid-connected system is more stable and durable in connection with the public grid, and there is no need to install an additional power storage system, which can save the cost of installing a power storage system. Disadvantages: This is a power generation system that must rely on the existing grid to operate, and the electricity generated cannot be stored (a storage system can also be installed to store excess electricity generated by solar energy). Advantages: This power generation system is widely used because it is not limited by geographical areas. It can be installed and used as long as there is sunlight, so it is very suitable for remote areas without power grids, isolated islands, fishing boats, outdoor breeding bases, etc. It can also be used as a Emergency power generation equipment in areas with frequent power outages. 1000W MPPT solar grid-connected inverter, 4 kinds of DC input voltage specifications are optional. PV-voc voltage range: 26V45V or 24v battery. PV-voc voltage range: 40V-60V or 36v battery. PV-voc voltage range: 55V-90V or 48v battery. PV-voc voltage range: 85V-130V or 72v battery. 1200W MPPT solar grid-connected inverter, 3 kinds of DC input voltage. PV-voc voltage range: 55V90V or 48V battery. PV-voc voltage range: 80V-125V or 72V battery. PV-voc voltage range: 120V-180V or 96V battery. How to connect the sensor? Connect the RS485 line of the AC energy collection meter to the 485 port of the inverter. Insert the terminal of the transmission current sensor into the collector “CT-IN” port (no +-). Connect the AC power port “AC-IN” of the collector to the same AC power supply of the load. Once connected, it will light up. In the inverter LCD, enter “Battery Grid”, by SET {Bat AutoLimit Grid}. The inverter is connected to AC first, and then to the battery, and the inverter will automatically output the same power as the electricity detected by the collector. Therefore, the inverter will not have excess energy fed into the grid (ie: automatic limiter function). One collection meter can connect 10 grid-connected inverters. There are 4 modes. PV mode/PV limit mode/battery constant power mode/battery limit mode. 1000W/1200W solar grid-connected inverter (with limiter) WiFi model. (Note: This model has no display screen, any relevant parameters can be viewed through the APP, no display screen). 1000W/1200W solar grid-connected inverter (with limiter) without WiFi. (Note: This model has a display screen, any relevant parameters can be viewed through the display screen, no WiFi mode). This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “possbay2008″ and is located in this country: CN. This item can be shipped worldwide.

Wattages: 1200W
Output voltages: 110V
Input voltages: 48V
Brand: Unbranded
System Configuration: Grid-Tie
Type: Charger/Inverter
Charging Mode: MPPT (Maximum Power Point Tracking)
Features: Freestanding, Automatic Voltage Detection, Wi-Fi Port, With Limiter
Application: Automotive, Electronics, Commercial, Home/Garden
Voltage: 11-20 V
Power: 901-1000 W
Power Source: Solar
Inverter Technology: Microinverter
Wattage: 900-999 W
Color: Blue
Custom Bundle: No
Colour: Blue

Category: 1000w | Comments Off

October 9

Solar Micro Inverter Grid Tie MPPT 1000W Internal Limiter Sensor Mode 95-265VAC

Solar Micro Inverter Grid Tie MPPT 1000W Internal Limiter Sensor Mode 95-265VAC. 1000w Grid Tie Inverter for. Solar Panels or Battery. Working well with all kinds of Battery. With internal Limiter / Wi-Fi connection. Limiter sensor clamp Wi-Fi port (optional). Input voltage Range : DC 22V-60V or 45V-90V (optional). Output Voltage : AC 110V 120V 220V 230V 240V (automaticly). A Small Grid Tie Power System with the Sunshine Grid Tie Inverter. Multiple inverters can be connected in parallel to creat bigger system. Plug and play installation. Output Frequency: Auto 50HZ or 60Hz. Is Smart Device: YES. Model Number: sun-1000gtil2-lcd Solar Grid Tie Inverter with Internal Limiter Sensor. Rated Voltage: 24V Or 48V. DC input voltage: 22V-90V. AC output: Auto 110V 220V. Power Factor: >0.95. Output: Pure Sine Wave. Function: Micro Inversor Solar with limiter. Feature 1: 1000W Solar Inverter with limiter for 4250W Solar Panel. Recommend Solar Panel Voltage: 18V, 24V, 30V, 36V. Recommend Solar Panel Cell: 36,60,72,96 cells. Recommend battery voltage: 24V, 48V. Advantage of The Sunshine Grid Tie Power System. There are many advantages of SGPV compare with the traditional grid tie power system. Low cost and easy installation – SGPV can make full use of all types of buildings’ surface that face to the sun in the city as well as fast and easy installation of solar modules and grid tie inverter. It just needs very low maintenance costs. Free combination – SGPV can be used as a separate grid tie system and can be setup as a large solar array with many of them. The quantity of SGPV in the array is just according to your desire. If you are planning to install a grid-tie PV system, in a general way, the solar array and inverter need to be carefully matched to ensure that the inverter’s voltage and power limits are not exceeded. When you want to increase more solar panels, and if the total power of the solar panels exceeds the allocation grid inverter, it is necessary to increase the cost of a grid inverter. Combination of SGPV does not interact – The traditional solar grid tie system, they offer units ranging in high power output and these units are modular so you can have multiple units operating in parallel for large solar arrays. Although, the traditional grid inverter has MPPT feature (Maximum Power Point Tracking), but the maximum power point is according to the entire series in terms of solar panels array, if the performance of a piece of solar panels in the system, for some reason, such as leaves, bird droppings, dust, shadow, etc. And degrades, the performance of the entire solar power system will decrease. Why we produced the GRID TIE INVERTER WITH LIMITER. It is in response to the overwhelming clamor from our customers for a product that can control the amount of power that the grid tie inverters (GTI) can generate so that the amount of excess power produced by the solar panels are reduced to insignificant levels, if not eliminated — because in some countries, the producer pays for the excess power it gives to the distribution grid. This is because the electric power meters (the one provided by the electricity provider in the area) are not aware of the direction of power flow. In other words it only adds even if power is exported to the grid, thus, the consumers will be charged for power even if it is given to the grid, and this is the problem. This is the 2nd generation grid tie inverter with limiter. But in case customer install inverter far away from the main circuit breaker, we also enable the 2nd GTIL work with stand-alone limiter, we call this-external limiter. For sure, the inverter can work under normal Grid tie-no limit mode, just set on the nice LCD and save your setting. New upgraded firmware enable battery or solar limiter current and power model. User can set the maximum output power of inverter, this can make the inverter work at cooler contition as user want and extend the lifespan of the inverter. User can set kick in/off voltage of the inverter which can flexible using with battery bank depend on users mind and can prevent battery bank from over discharged. DC input voltage (Rectifier AC-DC). Auto: 115V(95V-140V); 230V(185V-265V). Auto: 50Hz(47.5-51.5Hz);60V(59.3-60.5Hz). Over Current Protection 2. Over Temperature Protection 3. Reverse Polarity Protection 4. Integrate with internal limiter and external limiter function which can prevent excess power from going to the public grid. Utility grid AC voltage, waveform, frequency 2. Every day power and power generation curve, total power 3. Shows real time power, input voltage, inside temperature, date and time 4. Set the clock and date. Blue(stock), Gold and Silver(custom-made). Plug(EU or USA standard). Installing Sunshine Grid Tie Power System involves several key steps. Considering the total capacity of the grid tie power system that you need. Choosing applicable solar panels for Sunshine Grid Tie Inverter. Selecting accessory for installation of the Grid Tie Power System. Selecting correct model of Sunshine Grid Tie Inverter. Installing solar panels to suitable place. Installing Sunshine Grid Tie Inverter to suitable place. Connecting Sunshine Grid Tie Power System with cables and connectors. Completing Sunshine installation map and Connecting the PV modules. There is 2 method of connecting inverter. Comparing the connected method 1 and 2, we can see that method 2 is the good choice, because with method 1, the DC cables is more thick, so it is more expensive, and three pairs of connectors for parallel connecting plus three pairs of MC4 connectors should be used. But with method 2, the DC cables is thin, and just a pair of connectors for parallel connecting and a pair of MC4 connector should be used. Installing larger capacity of grid tie power system. Sometimes, maybe you are willing to install larger capacity of grid tie inverter in your house, this is also very easy to operate. For example, you want to install 2KW grid tie power system, you can install two 1KW grid tie power systems as shown in Method 2, two AC output cables should be all connected to the AC outlet of the utility grid with the plugs. The diagram of the 2KW grid tie system with two 1KW sytem are shownin following picture, we call this kind system as “Stackable System”. You can install any capacity of grid tie power system by stack small grid tie power systems. For example, if you want to install 12KW grid tie power system, there are many choices, you can stack six 2KW grid tie power systems, or twelve 1KW gird tie systems, or stack twenty-four 500W grid tie power systems, or stack fourty-eight 250W grid tie power system, even you can mix different capacity grid tie power systems to gain large capacity system. Installing Sunshine Grid Tie Power System to Three Phases Utility Grid. When the Capacity of Gird Tie Power System is larger, intall all the power system to one. Phase of the utility grid is not reasonable, maybe this will cause unbanlance of the three. Phase of the utility grid. In this section, we will explain how to install Sunshine Power System to three phases utility. Grid separately in order to balance the fed power. 3M Limiter Sensor1(Stanard). EU Plug or US Plug1(Standard). 20M Limiter Sensor1 (Optional). This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “myincast” and is located in this country: CN. This item can be shipped worldwide.

Color: 20M Limiter Sensor
Input Voltage: 22V-60VDC
Output Voltage: 95V-265VAC Auto
System Configuration: Grid-Tie
Inverter Technology: Microinverter
Current Output: Standard
Power Source: Solar
Size: Standard
Custom Bundle: No
Wattage: 1000W
Maximum Flow Rate: Standard
MPN: 756327537453
Item Length: Standard
Wire Gauge: Standard
Current Type: AC/DC
Voltage: 24 48 VDC 95-265VAC
Connector Type: Other
Features: Durable
Protection Properties: Low Voltage Protection
Maximum Input Power: 1000W
Maximum Input Voltage: Standard
Current Rating: Standard
Material: Other
Brand: Unbranded
Type: Charger/Inverter
Connector Configuration: Other
Model: 008
Recommended Environment: Indoor/Outdoor
Charging Mode: MPPT (Maximum Power Point Tracking)
Resistance Properties: Dustproof
Country/Region of Manufacture: China
Application: Home/Garden
Power: Standard
Product Line: Inverter

Category: solar | Comments Off

October 8

1000W Pure Sine Wave Grid Tie Inverter MPPT 120/240V Panel 36 Cells Function

1 1 PC micro inverter 2 1 PC AC Connection Cable 3 1 Set Installation screws 4 1 PC User Manual. On grid system diagram. ADVANTAGES OF GRID-TIED SYSTEMS 1. Batteries, and other stand-alone equipment, are required for a fully functional off-grid wind system and add to costs as well as maintenance. Grid-tied wind systems are therefore generally cheaper and simpler to install. Your wind turbine generator will often generate more electricity than what you are capable of consuming. With net metering, homeowners can put this excess electricity onto the utility grid instead of storing it themselves with batteries. Net metering (or feed-in tariff schemes in some countries) play an important role in how wind power is incentivized. Without it, residential wind systems would be much less feasible from a financial point of view. THE UTILITY GRID IS A VIRTUAL BATTERY. Electricity has to be spent in real time. However, it can be temporarily stored as other forms of energy e. Chemical energy in batteries. Energy storage typically comes with significant losses. The electric power grid is in many ways also a battery, without the need for maintenance or replacements, and with much better efficiency rates. According to EIA data[1], national, annual electricity transmission and distribution losses average about 7% of the electricity that is transmitted in the United States. Lead-acid batteries, which are commonly used with solar panels, are only 80-90% efficient at storing energy, and their performance degrades with time. Additional perks of being grid-tied include access to backup power from the utility grid (in case your solar system stop generating electricity for one reason or another). At the same time you help to mitigate the utility company`s peak load. As a result, the efficiency of our electrical system as a whole goes up. Off grid system diagram. ADVANTAGES OF OFF-GRID SOLAR SYSTEMS 1. NO ACCESS TO THE UTILITY GRID Off-grid solar systems can be cheaper than extending power lines in certain remote areas. Consider off-gird if you’re more than 100 yards from the grid. BECOME ENERGY SELF-SUFFICIENT Living off the grid and being self-sufficient feels good. Energy self-sufficiency is also a form of security. Power failures on the utility grid do not affect off-grid wind systems. On the flip side, batteries can only store a certain amount of energy, and during cloudy times, being connected to the grid is actually where the security is. You should install a backup generator to be prepared for these kinds of situations. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “top.creative.shop” and is located in this country: CN. This item can be shipped worldwide.

Color: Black
Input Voltage:: 20-50V
Output Voltage:: 240V
Current Output: As Describe
System Configuration: Grid-Tie
Power Source: Solar/Wind
Custom Bundle: No
Wattage: 1000W
Item Length: As Describe
Wire Gauge: As Describe
Current Type: AC
Voltage: As Describe
Connector Type: As Describe
Features: All Daylight Conditions, Waterproof
Shipping: Free
Protection Properties: Anti-island Protection, Black Current Protection, Discharge Protection, Freeze Protection, Frost Protection, Lightning Protection, Low Voltage Protection, Open Circuit Protection, Overcharge Protection, Overcurrent Protection
Maximum Input Power: 1200W
Maximum Input Voltage: As Describe
Inverter Technology: Microinverter
Current Rating: As Describe
Brand: Unbranded
Type: Charger/Inverter
Connector Configuration: As Describe
Model: 2022
Recommended Environment: Indoor/Outdoor
Country/Region of Manufacture: Hong Kong
Charging Mode: MPPT (Maximum Power Point Tracking)
Resistance Properties: Abrasion Resistant, Antimicrobial Resistant, Chemical Resistant, Corrosion Resistant, Dustproof, Dust Resistant, Fade Resistant
Application: Back-up Power, Electronics, Home/Garden, Marine
Power: 1000W

Category: 1000w | Comments Off

October 7

1000W 1200W Solar Grid Tie Inverter AC 110V/220V With Limiter Sensor LCD Display

1000W solar grid-connected inverter (with limiter) screen display 1200W solar grid-connected inverter (with limiter) screen display. Easy installation, can be connected in parallel on the AC side. Color LCD – can switch between Chinese and English to display various parameters. Wifi wireless communication expansion interface, the inverter power generation data can be collected through the wifi plug, and monitored on the PC webpage or mobile APP. Including: input voltage, output power, temperature, power curve, output sinusoidal waveform, etc. Internal limit function can be integrated. The battery discharge power mode is enabled, which automatically adjusts the depth of discharge of the battery pack. The Grid Tie Inverter converts the DC power produced by the solar panels to AC power, connects to the grid and feeds all available power from the solar panels to the AC load. Grid-connected mode: It must be connected to the public grid during installation, which is to connect the solar panel, the home electricity grid and the public grid (it is recommended to use it when the public grid is stable). Advantages: Compared with the off-grid mode, the grid-connected system is more stable and durable in connection with the public grid, and there is no need to install an additional power storage system, which can save the cost of installing a power storage system. Disadvantages: This is a power generation system that must rely on the existing grid to operate, and the electricity generated cannot be stored (a storage system can also be installed to store excess electricity generated by solar energy). 1000W MPPT solar grid-connected inverter, 4 kinds of DC input voltage specifications are optional. PV-Voc voltage range: 26V45V or 24V battery. PV-Voc voltage range: 40V-60V or 36V battery. PV-Voc voltage range: 55V-90V or 48V battery. PV-Voc voltage range: 85V-130V or 72v battery. 1200W MPPT solar grid-connected inverter, 3 kinds of DC input voltage specifications are optional. Voltage range: 55V90V or 48V battery. Voltage range: 80V-125V or 72V battery. Voltage range: 120V-180V or 96V battery. How to connect the sensor? Connect the RS485 line of the AC energy collection meter to the 485 port of the inverter. Insert the terminal of the transmission current sensor into the collector “CT-IN” port (no +-). Connect the AC power port “AC-IN” of the collector to the same AC power supply of the load. Once connected, it will light up. In the inverter LCD, enter “Battery Grid”, by SET {Bat AutoLimit Grid}. The inverter is connected to AC first, and then to the battery, and the inverter will automatically output the same power as the electricity detected by the collector. Therefore, the inverter will not have excess energy fed into the grid (ie: automatic limiter function). One collection meter can connect 10 grid-connected inverters. There are 4 modes. PV mode/PV limit mode/battery constant power mode/battery limit mode. 1000W/1200W solar grid-connected inverter (with limiter) without WiFi. (Note: This model has a display screen, any relevant parameters can be viewed through the display screen, no WiFi mode). This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “possbay2011″ and is located in this country: CN. This item can be shipped to United States, Canada, United Kingdom, Mexico, Germany, Japan, Brazil, France, Australia.

Wattages: 1000W
Output voltages: 110V
Input voltages: 36V
Brand: Unbranded
System Configuration: Grid-Tie
Type: Charger/Inverter
Features: Automatic Voltage Detection, LCD Display, Freestanding
Power: 901-1000 W
Power Source: Solar
Inverter Technology: Microinverter
Wattage: 900-999 W
Recommended Environment: Indoor
Color: Blue
Custom Bundle: No

Category: 1000w | Comments Off

September 28

Solar Inverter 1000w Mppt Grid Tie 18v36v Panel Dc Ac110/220v 50/60hz Sine Wave

Solar Inverter 1000w Mppt Grid Tie 18v36v Panel Dc Ac110/220v 50/60hz Sine Wave. For the Micro grid tie Inverter, we have 110V and 220V output voltage. There may be some delays due to flight, holiday, weather, local post, local natural disaster impact. It must also be in the original packaging. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “rodonite-7″ and is located in this country: CN. This item can be shipped worldwide.

Color: WV-1000
Input Voltage: 22-50V
Output Voltage: 90-140VAC 50hz60hz
Size: 394*209*117mm
Current Rating: Other
Inverter Technology: Power Optimizer
Model: 4865811822
Country/Region of Manufacture: China
Maximum Input Power: 110/220V
Custom Bundle: No
Current Type: DC
Product Line: Solar Inverter 1000w Mppt Grid Tie 18v36v Panel
System Configuration: Grid-Tie
Maximum Input Voltage: 220v
Power Source: Solar
Type: Solar Inverter
Features: Durable
MPN: 4865811846
Recommended Environment: Indoor/Outdoor
Item Length: Standard
Power: 1000W
Current Output: Other
Brand: Unbranded
Application: Aquaculture
Maximum Flow Rate: Other
Charging Mode: MPPT (Maximum Power Point Tracking)
Is_customized: Yes
Output Frequency: 50hz60hz
Output Power: 1000W
Output Type: Single
Weight: 2.8kg
Resistance Properties: Other
Voltage: 18V36V

Category: solar | Comments Off

September 26

1000W Solar Grid Tie Inverter 110V or 220V Output MPPT Pure Sine Wave Inverter

Grid Tied inverter is a compact unit, which directly converts direct current into alternating current for powering appliances and/or office equipments and connecting to utility grid. The AC output from Smart Micro inverter is synchronized and in-phase with the utility grid. Technical Parameters: Solar panels:200W-1000W The Voltage of Matched solar panel:Vmp: 26-39V, Voc: 34-45V AC Output Voltage: 120VAC(90-140VAC) or 230VAC(190-260VAC) Frequency Range: 48Hz 62Hz Auto DC Input: 20V-45V MPPT range: 26V – 36V. Vmp(of a solar panel) must be in the MPPT range to ensure the good output efficiency. 1000W Solar Grid Tie Inverter 110V or 220V Output MPPT Pure Sine Wave Inverter. The Voltage of Matched solar panel:Vmp: 26-39V, Voc: 34-45V. AC Output Voltage: 120VAC(90-140VAC) or 230VAC(190-260VAC). Frequency Range: 48Hz 62Hz Auto. MPPT range: 26V – 36V. Please note that this inverter is specially designed for solar panels and can be applied to 24V solar panels. Vmp is 26-39V and Voc is 34-45V. If a 12v battery is used as input, the inverter will not be able to reach its maximum Power point. We recommend using 36v battery as input source to get better output power. There is always a power loss in the conversion from DC to AC. Energy is also lost through heat. Therefore, if you want to be 100% off the machine, it will not give it to you. Solar panels also have losses, so please do not calculate the efficiency based on the inverter output power/solar panel specifications. Because solar panels and inverters have their own efficiency. Collected fault feedback from multiple customers, most of which stopped working because of the wrong solar panel voltage input. Please use a 10 square cable, the cable length is not recommended to exceed 4M. Tighten the DC terminal wiring. If the cable is too thin or the connection is loose, the inverter will be damaged. 1: Use 200W-1000W Solar Panel, Vmp: 28-39V, Voc: 34-46V. 2: Red terminal: Connect DC positive, black terminal: Connect DC negarive.. Be sure to tighten! Otherwise it will be short circuited. AC The output need to be connected to the grid power. 3:AC socket: Connection to the mains. The AC cord to the inverter 3 foot outlet, then the AC cord to home 3 pin AC outlet. 4:The switch of the home outlet must be turned on. Stackable connection The purpose is let small power inverter become high-power inverter. In order to achieve higher power use requirements, the use of this product can be stacked, such as: 4 grid inverters 1000W of stack used is equal to 4000W, and the number of open stacks (No Quantitative Restrictions). My goal is to make sure you are happy and having the pleasant shopping with us. Our product range from off grid high frequency pure sine wave inverter (150W to 8000W) and grid tie inverter (200W to 2000W). Most of them are hot products in the market such as. High frequency pure sine wave inverter up to 8000w with stable performance, with LED and LCD display. High advanced LCD display 2000w grid tie inverter with 45-90vdc input. Build-in dump load for small grid PV system. The highly compact designed micro inverter for 0.82kgs with power line carrier-current communication, it can built up a megawatt solar power station. Our pure sine wave inverters meet the needs of a wide range of application such as for vehicle, marine, train or any mobile power station. The special DC volt 36V, 72V, 96V, 110VDC ect can be selected for special application. The pure sine wave inverter products are certified to EMC testing in Australia and CE FCC, RoHS, approved. Reliable Electric is identified as one of the most famous trademarks in China for pure sine wave inverter for its relaible power inverter, reasonable price and responsible service. Reliable electric is committed to improving the environment and the renewable energy industry and continues to develop more efficient and cost-effective solutions to bring more green electricity to our lives. Any questions will be replied within 24 hours except the weekend and statuary holiday in Chinese Beijing Time. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “bayoung-electronic” and is located in this country: CN. This item can be shipped worldwide.

DC Input Voltage: 10.5-30V
AC Output Voltage: 220VAC(180-260VAC)
Size: 39 x 20.3 x11.3CM
Inverter Technology: Microinverter
Model: Pure sine wave inverter
Country/Region of Manufacture: China
Wattage: 1000W
Current Type: AC/DC
System Configuration: Grid-Tie
Material: aluminum and others
Power Source: Solar
Type: MPPT Solar inverter generator
Color: Silver
Recommended Environment: Indoor/Outdoor
Protection Properties: Anti-island Protection, Black Current Protection, Discharge Protection, Lightning Protection, Low Voltage Protection, Open Circuit Protection, Overcharge Protection, Overcurrent Protection, Overload Protection, Overspeed Protection
Power: 1000W
Brand: Bayoung
Application: Home/Garden
Charging Mode: MPPT (Maximum Power Point Tracking)
Voltage Input: 18V/24V
Voltage Output: 110V/220V
Frequency range: 50Hz/60Hz(Auto control)
Solar panel: 18V(36cells),24/30V(60cells),36V(72cells)
Featured Refinements: Grid Tie Inverter
Bundle Listing: Yes
Voltage: 18V or 24V/36V

Category: 1000w | Comments Off

September 25

Solar Grid Tie Inverter WIFI MPPT 1000W 2000W Limiter Sensor Battery Discharge

Solar Grid Tie Inverter WIFI MPPT 1000W 2000W Limiter Sensor Battery Discharge. Clamp Sensor:with 3meters/10meters cable(choose). A Wifi Plug with Cable(choose). An AC Power Cable. Piece User Manual (English). The V6.1 version cancelled the EXTERNAL port. We will randomly send the V5.1 version and V6.1 version. The other functions and performances of the improved product are the same as those before the improvement. After the product is improved, it will be more convenient for users to use the product. The products modified include the SUN-2000G2, SUN-1000G2 of solar inverter and SUN-2000G2-WAL(WDL) and SUN-1000G2-WAL(WDL) of wind inverter. Feature for the Solar grid tie inverter. Easy installation, can be paralleled on AC side. Nice LCD display various parameters including input voltage, output power, temperature, form etc. Can be integrated with internal limit function. RS485 extended interface serviceable. Power curve, output sine wave collect by wifi plug and monitor. Work with solar panels/work with battery. NOTE : It will be built-in side the inverter. How to use the grid tie inverter? 1 unit inverter installation / more units inverters in parallel. The inverter AC output can be connected in the AC plug of grid in the house. Using Grid Tie Inverter With Limiter Model. 2.1 The Grid Tie Inverter with Limiter delivers only the power needed by the load and prevents delivering excess power hence avoids excess power in going back to the Grid. 2.2 The heart of the Grid Tie Inverter with Limiter is the Limiter Module (LM). The LM continuously sampled the power needed by the load through the current sensor connected after the Main Circuit Breaker. The LM then will process the signal. It then sends signal to Grid Tie Inverter how much power to deliver to the load in real time. 2.3 The user, after installing and connecting the GTIL correctly, need not do anything and the unit will do its work automatically. Installation of GTIL With Internal Limiter. 3.1 This installation is not require an additional limiter module, Installation is much easier. Clamp the current sensor cable to the hot wire to measure the current, the internal limiter will auto detect the load power and control the inverter output power, excess power will be well controlled. 3.2 External protective device including dc and ac SPD(Surge protection device), dc and ac breaker, etc is recommended to installed in the system. There may be some delays due to flight, holiday, weather, local post, local natural disaster impact. It must also be in the original packaging. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “ginmega” and is located in this country: CN. This item can be shipped worldwide.

Colour: SUN-2000
Input Voltage: DC45V-90V
Output Voltage: 185-265VAC
Socket Type: With 3m-Sensor Wi-Fi
System Configuration: Grid-Tie
Current Output: Other
Power Source: Solar
Inverter Technology: Microinverter
Size: Standard
Color: Multicolor
Custom Bundle: No
Wattage: Other
MPN: 870989098
Item Length: Standard
Brand: Unbranded
Type: Charger/Inverter
Current Type: AC/DC
Voltage: DC45V-90V or to AC110V AC220V
Model: Other
Recommended Environment: Indoor/Outdoor
Features: Durable
Charging Mode: MPPT (Maximum Power Point Tracking)
Resistance Properties: Other
Country/Region of Manufacture: China
Application: Agriculture/Farming, Electronics, Home/Garden
Power: 1000W 2000W
Protection Properties: Other

Category: solar | Comments Off

September 23

Solar Grid Tie Inverter 22-65V/45-90Vdc 3m Sensor 110V/220Vac WIFI LCD 1000W

Solar Grid Tie Inverter 22-65V/45-90Vdc 3m Sensor 110V/220Vac WIFI LCD 1000W. 1000W Solar Grid Tie Inverter 22-65V/45-90Vdc 3m Limiter Sensor 110V/220Vac Pure Sine Wave Inverter with WIFI LCD Display. Easy installation, can be paralleled on AC side. Nice LCD display various parameters including input voltage, output power, temperature, form etc. Can be integrated with internal limit function. RS485 extended interface serviceable. Power curve, output sine wave collect by WIFI plug and monitor. Work with solar panels/work with battery. There may be some delays due to flight, holiday, weather, local post, local natural disaster impact. It must also be in the original packaging. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “audosta” and is located in this country: CN. This item can be shipped worldwide.

Color: NO WIFI
Input Voltage: 22-65VDC
Output Voltage: 90-260VAC
Socket Type: No limiter
Size: 430*310*160mm
Current Rating: Standard
Model: 1028502347
Max. Output power: 1000W
Max.Output Power: 1000W
MPPT Effeciency: 99%
MPPT Efficiency: 99%
Current Type: AC/DC
System Configuration: Grid-Tie
Power Source: Solar
Type: DC/AC Inverters, Solar Grid Tie Inverter
Features: Zero export
MPN: 1028502371
Power: 1000W
Current Output: Standard
Brand: Unbranded
Application: Electronics
Charging Mode: Standard
Output Frequency: 50HZ60HZ
Output Power: 1 – 200KW
Output Type: Single
Output Wave: Pure Sine Wave
Phase: Single Phase
Weight: 5KG
Input voltage range: 22-65VDC/45-90VDC
Resistance Properties: Standard
Voltage: Standard

Category: solar | Comments Off

December 2024
M	T	W	T	F	S	S
« Nov
						1
2	3	4	5	6	7	8
9	10	11	12	13	14	15
16	17	18	19	20	21	22
23	24	25	26	27	28	29
30	31