2000W Grid Tie Inverter with Power Limiter MPPT Stackable DC45-90V to AC190-260V

2000W Grid Tie Inverter with Power Limiter MPPT Stackable DC45-90V to AC190-260V. Why we produced the GRID TIE INVERTER WITH LIMITER? It is in response to the overwhelming clamor from our customers for a product that can control the amount of power that the grid tie inverters (GTI) can generate so that the amount of excess power produced by the solar panels are reduced to insignificant levels, if not eliminated — because in some countries, the producer pays for the excess power it gives to the distribution grid. This is because the electric power meters (the one provided by the electricity provider in the area) are not aware of the direction of power flow. In other words it only adds even if power is exported to the grid, thus, the consumers will be charged for power even if it is given to the grid, and this is the problem. This is the 2nd generation grid tie inverter with limiter. But in case customer install inverter far away from the main circuit breaker, we also enable the 2nd GTIL work with stand-alone limiter, we call this-external limiter. For sure, the inverter can work under normal Grid tie-no limit mode, just set on the nice LCD and save your setting. New upgraded firmware enable battery or solar limiter current and power model. User can set the maximum output power of inverter, this can make the inverter work at cooler contition as user want and extend the lifespan of the inverter. User can set kick in/off voltage of the inverter which can flexible using with battery bank depend on users mind and can prevent battery bank from over discharged. Continuous Power Output:1950W Peak Power Output:2000W Input DC Voltage Range:45V 90V Peak power tracking voltage:50V-90V AC Output Voltage Range:190VAC 260VAC Output Frequency:46Hz65Hz Standby Power Consumption. How to use the Inverter? Standard Grid Tie Inverter Model. More than 1 unit inverters stackable. The Grid Tie inverter converts DC power produced by Solar Panels to AC, connects to the grid and feed all of the power available from the panels to the AC load. All excess power that is not needed by the load is then exported to the Grid. If the Grid fails, then the Grid Tie Inverter will turn off. When the Grid comes back on line. The Grid Tie Inverter will again supply power to the load and any excess power is exported to the Grid again. If the Solar Panel is producing less power and the GTI cannot deliver all the power needed by the load, then power will be supplemented by the Grid. Power Meters (Except smart meter) are not aware of the direction of Power flow. The user then pays for the power exported and delivered by the Grid. Using Grid Tie Inverter With Limiter Model. The Grid Tie Inverter with Limiter delivers only the power needed by the load and prevents delivering excess power hence avoids excess power in going back to the Grid. The heart of the Grid Tie Inverter with Limiter is the Limiter Module (LM). The LM continuously sampled the power needed by the load through the current sensor connected after the Main Circuit Breaker. The LM then will process the signal. It then sends signal to Grid Tie Inverter how much power to deliver to the load in real time. The user, after installing and connecting the GTIL correctly, need not do anything and the unit will do its work automatically. Installation of GTIL With Internal Limiter. This installation is not require an additional limiter module, Installation is much easier. Clamp the current sensor cable to the hot wire to measure the current, the internal limiter will auto detect the load power and control the inverter output power, excess power will be well controlled. External protective device including dc and ac SPD(Surge protection device), dc and ac breaker, etc is recommended to installed in the system. Limiter Setting on the LCD of the inverter. The GTIL include three working mode:Work as normal GTI without power limitation. Work under Internal limiter mode and Work under External limiter mode, Pls make your setting on the LCD and save it, details setting operation, pls read the GTI manual. 5 Battery Discharge Power Mode. 6 Limiter Module Specification. Clamp sensor- Max 100A. Clamp sensor signal- 5v AC max mA. DC signal Cable- 5v DC, max mA. 1 x Solar Grid Inverter with Limiter 1 x Internal type Limiter clamp with sensor & 2m cable 1 x English User Manual. Sellers are not responsible for service transit time. Transit times are provided by the carrier, exclude weekends and holidays, and may vary with package origin and destination, particularly during peak periods. (Only for Business Express). Feedback is very important to us. Please do not give us any bad feedback. If you can do as we say, we will be very grateful. Please give us the opportunity to resolve any problem. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “bayoung-electronic” and is located in this country: CN. This item can be shipped worldwide.

AC Output Voltage Range: 190VAC ~ 260VAC
Brand: Bayoung
Color: Blue
Continuous Power Output: 1950W
Country/Region of Manufacture: China
Input DC Voltage Range: 45V ~ 90V
Model: 2000W Limiter Grid Tie Inverter
MPPT Function: Yes
Output Frequency: 46Hz~65Hz
Output Wave Form: Pure Sine Wave
Peak Power Output: 2000W
Peak power tracking voltage: 50V-90V
Stackable: Yes
System Configuration: Grid-Tie
Voltage: DC45-90V
Wattage: 2000W

Category: 2000w | Comments Off

September 22

2000W Wind Power On Grid Tie Inverter 220V Output Wind Turbine Input 110V Mains

2KW Wind Power Grid-tied Inverter. WWGIT20 is wind power grid-tied controller&inverter integrated machine with MPPT function. It looks concise and can be easily operated. Keep pressing the button for 5s to unload completely. And then recover by pressing it for another 5s. Switch “ON” the brake switch. Brake by over wind speed. It dumps load completely when reached the set wind speed, and recover automatically after working 10mins and wind speed is less than 15m/s. Brake by over rotational Speed. Unload completely when reached the set rotational speed, and recover automatically after 10mins. 85%110% of rated grid voltage. AC output over frequency. AC short circuit protection. Dump load, grid state, wind generator state, faults. Wind rotate speed, wind power, AC output voltage /current/power, and fault code. Dump load dimension(WHD). Dump load net weight. Note: Part of parameters can be adjusted according to customer. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “bayoung-electronic” and is located in this country: CN. This item can be shipped worldwide.

Type: Charger/Inverter
Brand: Bayoung
Application: Agriculture/Farming, Aquaculture, Back-up Power, Camping/Hiking, Commercial, Electronics, Home/Garden
Resistance Properties: Abrasion Resistant, Acid Resistant, Antimicrobial Resistant, Chemical Resistant, Childproof, Child Resistant, Corrosion Resistant, Dustproof
Current Rating: 11-20 A
Inverter Technology: Hybrid
Wattage: 2000-2499 W
Current Type: AC
System Configuration: Grid-Tie
Power Source: Wind
Features: All Daylight Conditions, Automatic Voltage Detection, Brushless Motor, Corrosion Resistant, Daylight Operation, Fixed Guyed, Flexible
Power: 1801-2000 W
Current Output: 10 A or Less
Charging Mode: MPPT (Maximum Power Point Tracking)
Voltage: 200-299 VAC

Category: 2000w | Comments Off

September 13

2000W Grid Tie Solar Inverter 4 MPPT Micro Inversor Solar Panel 230VAC 240V WIFI

2000W Grid Tie Solar Inverter 4 MPPT Micro Inversor Solar Panel 230VAC 240V WIFI. DC input current of 12.5A, adapt to 600W PV module. The Microinverter is used in utility-interactive grid-tied applications, comprised of two key elements: Microinverter Router. If the wireless signal in the area where the microinverter is weak, it is necessary to add a wifi signal booster at a suitable place between the router and the microinverter. This integrated system improves safety; maximizes solar energy harvest;increases system reliability, and simplifies solar system design, installation, maintenance, and management. Microinverters Maximize PV Energy Production. Each PV module has individual Maximum Peak Power Tracking (MPPT) controls, which ensures that the maximum power is exported to the utility grid regardless of the performance of the other PV modules in the array. When PV modules in the array are affected by shade, dust, orientation, or any situation in which one module underperforms compared with the other units, the Microinverter ensures top performance from the array by maximizing the performance of each module within the array. More Reliable than Centralized or String Inverters. The distributed Microinverter system ensures that no single point of system failure exists across the PV system. Microinverters are designed to operate at full power at ambient outdoor temperatures of up to 149? You can install individual PV modules in any combination of Module quantity, orientation, different type and power rate The Ground wire (PE) of the AC cable is connected to the chassis inside of the Microinverter, potentially eliminating the installation of grounding wire (check local regulation). Data collection adopts internal wifi, wireless router is needed near the microinverter. When complete the installation of microinverter, configure wireless router with internal wifi(refer to the wifi user manual). The data will be uploaded automatically. Users can monitor and manage the microinverter through corresponding website or APP. The Microinverters connect with the single-phase grid, and can also use multiple Micro inverters in the form of single-phase grid to achieve three-phase grid. Max units per branch. 267×300×42.5 mm (Without mounting bracket and cable). Compatible with 6072 cell PV modules. Power line / WIFI/Zigbee. DIN VDE 1026 UL1741. Installation Procedures Microinverter System Installation. A PV system using Microinverters is simple to install. Each Microinverter easily mounts on the PV racking, directly beneath the PV module(s). Low voltage DC wires connect from the PV module directly to the Microinverter, eliminating the risk of high DC voltage. Installation MUST comply with local regulations and technical rules. An AC GFCI device should not be used to protect the dedicated circuit to the microinverter even though it is an outside circuit. None of the small GFCI devices (530mA) are designed for back feeding and will be damaged if back feed. In a similar manner, AC AFCIs have not been evaluated for back feeding and may be damaged if back feed with the output of a PV inverter. Perform all electrical installations in accordance with local electrical codes. Be aware that only qualified professionals should install and/or replace Microinverters. Before installing or using an Microinverter, please read all instructions and warnings in the technical documents and on the Microinverter system itself as well as on the PV array. Be aware that installation of this equipment includes the risk of electric shock. Do not touch any live parts in the system, including the PV array, when the system has been connected to the electrical grid. Strongly recommend to install Surge protection Devices in the dedicated meter box. Step 1- Install the AC branch circuit junction box. Install an appropriate junction box at a suitable location on the PV racking system (typically at the end of a branch of modules). Connect the open wire end of the AC cable into the junction box using an appropriate gland or strain relief fitting. Wire the conductors of the AC(230/400Vac): L – red; N – black ;PE – yellow green. Connect the AC branch circuit junction box to the point of utility Interconnection. WARNING: Wiring colour code can be diferent according local regulation, check all the wires of the installaton before connecting to the AC cable to be sure they match. Step 2- Attach the Microinverters to the racking or the PV module frame. Mark the location of the Microinverter on the rack, with respect to the PV module junction box or any other obstructions. Mount one Microinverter at each of these locations using hardware recommended by your module racking vendor. WARNING: Do not place the inverters (including DC and AC connectors) where exposed to the sun, rain or snow, even gap between modules. Allow a minimum of 3/4 1.5cm. Between the roof and the bottom of the Microinverter to allow proper air flow. Step 3 – Connect the microinverters in parallel. Check the Microinverter technical data page 5 for the maximum allowable number of Microinverters on each AC branch circuit. WARNING: DO NOT exceed maximum number of Microinverters in an AC branch circuit, as displayed on the page 5 of this manual. Step 4- Install an AC cable protective end cap at the end of AC cable. Step 5 – Connect Microinverter to the PV Modules. When plugging in the DC cables, if AC already available, the Microinverter should immediately blink red light and will start work within the setting time (default 60 seconds). If AC is not available, the red light will blink 3 times quickly and repeat after one second until AC is connected. Microinverter System Operating Instructions To operate the microinverter PV system: 1. Turn ON the AC circuit breaker on each microinverter AC branch circuit. Turn ON the main utility-grid AC circuit breaker. Your system will start producing power after a one-minute waiting time. The units should start blinking red one minutes after turning on the AC circuit breaker. Then blue led blinking. This means they are producing power normally, the faster blinking of the blue led means more power generated. Configure the internal wifi module according to its user manual. NOTE: When AC power is applied but the microinverter not started up, about 0.1A current and 25VA(W) power for each microinverter may be measured by a power meter. This power is reactive power, not consume from utility grid. There may be some delays due to flight, holiday, weather, local post, local natural disaster impact. It must also be in the original packaging. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “rodonite-7″ and is located in this country: CN. This item can be shipped worldwide.

Color: Inverter 5M AC cable
Input Voltage: 20-60V
Output Voltage: 230V(184-265V)
Size: 267 * 300 * 42.5 mm
Model: 8991503531
Country/Region of Manufacture: China
Output Power: 2112W(Maximum)
Output Type: 230V / 184-265
Rated output current: @230VAC 9.2A
Rated Output Power: 2000W
Rated voltage: @230V(184-265VAC)
Recommend PV Voc: 33-60V
Rrequency: 50/60Hz(45~65Hz)
Start-Stop voltage: 20-60V
Static MPPT: 99%
Weight: 5.3kg
System Configuration: Grid-Tie
Certification: CE, FCC, RoHS
DC short current: 16A*4
Dimensions: 267*300*42.5 mm (Without mounting bracket and c…
Is Smart Device: Yes
Is_customized: Yes
Max Input Current: 12.5A*4
Max output: 96.5%
Max output Power: 2112W
MPN: 8991503556
Brand: Unbranded
Max solar panel: 4*600W (max)
Max units per branch: @230V:4PCS
MPPT: 25-55V
Operating temperature: – 40℃ to +65℃
Origin: CN(Origin)
Output Current: 9.2A(Maximum)
Output Frequency: 50/60Hz

Category: 2000w | Comments Off

August 27

2000W Wind Turbine Grid Tie Inverter Input 45-90V AC Output 110V AC with Limiter

2000W Wind Turbine Grid Tie Inverter Input 45-90V AC Output 110V AC w/ Limiter. Max Efficiency:>92% MPPT Efficiency:99%. DC/3PHASE AC 22-65V/ 45V-90V. AC 100V 110V 120V 220V 230V 240V 50hz 60hz. NEW 1000W Wind Power Grid Tie Inverter. Low cost and easy installation. Directly connect to three phase wind turbine. Much better output waveform compare with similiar GTI. Improving the efficiency of the entire Wind power system. Overload protection, Anti-island protection. Short-circuit protection/Reverse polarity protection. AC output voltage and current THD. Input AC/DC Voltage Range. AC Output Voltage Range. 90-130V / 190VAC 260VAC. Dimensions (W x H x D). (1) (2) Dump load resistor connection Terminal. This terminals will connect to the dump load resistor. (3) AC socket, This socket will connect the inverter to the public grid via the AC cable. This terminals will connect to the wind turbine. The Inverter display can show many information, The main interface of the display and the icons explainations are show above. The inverter also integrate with internal limiter and external limiter function which can prevent excess power from going to the public grid. Select the internal limiter mode, inverter will work under limiter mode, output power of the inverter will be determined by load power. Select the external limiter mode, inverter need a external limiter module working with it. For more details about the limiter function, pls contact supplier. This function only useful with limiter type inverter. In this interface, the display shows real time power, PV input voltage, inside temperature, date and time. Clock And Date Setting. Set the clock and date in this page, save the setting before exit. Notes: Save the setting after you reconfigurate the working mode or backlight setting. Notes: Battery Discharge Current Mode And Battery Discharge Power Mode are not developed yet for this wind inverter. This interface will show the real time grid waveform. The grid voltage and frequency also will show in this interface. The energy interface will show the power generation curve everyday. Today KWH and Total KWH are also show in this page. AC Output Current Waveform and PF Test Of 2000W Model. Tested 2000W model at nearly full load, Output current waveform shows good pure sine wave in oscilloscope, PF value also shows in good result, 99.8% PF value. Advanced patented technology, MPPT efficiency is higher. High-quality imported components, more stable quality, lower failure rate. Significantly longer life, more than 10 years. Each inverter need to pass twice testing (20 hours) before leaving factory. Combination of SGPV does not interact. Improving the efficiency of the entire solar power system. No(Follow-up Tracking information will not be generated until the package arrives at the destination country). We will reply you within 24 hours. Feedback is important to us, we will leave positive to our customers. We understand the concerns and frustrations you might have, and will do our endeavor to resolve the issues. Please give us the opportunity to resolve any problem. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “bayoung-electronic” and is located in this country: CN. This item can be shipped worldwide.

Input Voltage: 2000W/45V-96V
Size: 434*196*88mm
Current Rating: 11-20 A
Inverter Technology: Hybrid
Model: GTINVT20
Maximum Input Power: 1801-2000 W
Wattage: 1500-1999 W
Current Type: AC/DC
System Configuration: Grid-Tie
Power Source: Wind
Type: Charger/Inverter
Features: All Daylight Conditions, Automatic Voltage Detection, Brushless Motor, Corrosion Resistant, Daylight Operation, Fixed Guyed, Flexible, Foldable, Freestanding
Color: Blue
Recommended Environment: Outdoor
Protection Properties: Anti-island Protection, Black Current Protection, Discharge Protection, Freeze Protection, Frost Protection, Lightning Protection, Low Voltage Protection, Open Circuit Protection, Overcharge Protection, Overcurrent Protection
Power: 1000 /2000 W
Current Output: 11-19 A
Brand: Bayoung
Application: Agriculture/Farming, Aquaculture, Automotive, Back-up Power, Camping/Hiking, Commercial, Electronics, Home/Garden, Irrigation, Marine
Charging Mode: MPPT (Maximum Power Point Tracking)
Resistance Properties: Abrasion Resistant, Acid Resistant, Antimicrobial Resistant, Chemical Resistant, Childproof, Child Resistant, Corrosion Resistant, Dustproof, Dust Resistant, Fade Resistant
Voltage: 41-50 V

Category: 2000w | Comments Off

August 9

2000W Battery Discharge Power Mode/MPPT Solar Grid Tie Inverter Pure Sine Wave

2000W Battery Discharge Power Mode/MPPT Solar Grid Tie Inverter 2KW with Limiter Sensor DC 45-90V AC 220V 230V 240V PV connected. 2000w Grid Tie Inverter for Solar Panels or Battery. Working well with all kinds of Battery. With internal Limiter / Wi-Fi connection. Input voltage Range : 45V-90V. Output Voltage : 220V 230V 240V. Why we produced the GRID TIE INVERTER WITH LIMITER? It is in response to the overwhelming clamor from our customers for a product that can control the amount of power that the grid tie inverters (GTI) can generate so that the amount of excess power produced by the solar panels are reduced to insignificant levels, if not eliminated — because in some countries, the producer pays for the excess power it gives to the distribution grid. This is because the electric power meters (the one provided by the electricity provider in the area) are not aware of the direction of power flow. In other words it only adds even if power is exported to the grid, thus, the consumers will be charged for power even if it is given to the grid, and this is the problem. This is the 2nd generation grid tie inverter with limiter. But in case customer install inverter far away from the main circuit breaker, we also enable the 2nd GTIL work with stand-alone limiter, we call this-external limiter. For sure, the inverter can work under normal Grid tie-no limit mode, just set on the nice LCD and save your setting. New upgraded firmware enable battery or solar limiter current and power model. User can set the maximum output power of inverter, this can make the inverter work at cooler contition as user want and extend the lifespan of the inverter. User can set kick in/off voltage of the inverter which can flexible using with battery bank depend on users mind and can prevent battery bank from over discharged. Wi-Fi Function for monitor the solar plant on App or Website. Wifi Port for MPPT 2000W NEW SUN Solar Grid Tie Inverter. Input DC Voltage Range. Peak power tracking voltage. AC Output Voltage Range. Dimensions (W x H x D). How to use the Inverter? Standard Grid Tie Inverter Model. The Grid Tie inverter converts DC power produced by Solar Panels to AC, connects to the grid and feed all of the power available from the panels to the AC load. All excess power that is not needed by the load is then exported to the Grid. If the Grid fails, then the Grid Tie Inverter will turn off. When the Grid comes back on line. The Grid Tie Inverter will again supply power to the load and any excess power is exported to the Grid again. If the Solar Panel is producing less power and the GTI cannot deliver all the power needed by the load, then power will be supplemented by the Grid. Power Meters (Except smart meter) are not aware of the direction of Power flow. The user then pays for the power exported and delivered by the Grid. Using Grid Tie Inverter With Limiter Model. 2.1 The Grid Tie Inverter with Limiter delivers only the power needed by the load and prevents delivering excess power hence avoids excess power in going back to the Grid. 2.2 The heart of the Grid Tie Inverter with Limiter is the Limiter Module (LM). The LM continuously sampled the power needed by the load through the current sensor connected after the Main Circuit Breaker. The LM then will process the signal. It then sends signal to Grid Tie Inverter how much power to deliver to the load in real time. 2.3 The user, after installing and connecting the GTIL correctly, need not do anything and the unit will do its work automatically. Installation of GTIL With Internal Limiter. 3.1 This installation is not require an additional limiter module, Installation is much easier. Clamp the current sensor cable to the hot wire to measure the current, the internal limiter will auto detect the load power and control the inverter output power, excess power will be well controlled. 3.2 External protective device including dc and ac SPD(Surge protection device), dc and ac breaker, etc is recommended to installed in the system. Limiter Setting on the LCD of the inverter. The GTIL include three working mode:Work as normal GTI without power limitation. Work under Internal limiter mode and Work under External limiter mode, Pls make your setting on the LCD and save it, details setting operation, pls read the GTI manual. 5 Battery Discharge Power Mode. 6 Limiter Module Specification. Clamp sensor- Max 100A. Clamp sensor signal- 5v AC max mA. DC signal Cable- 5v DC, max mA. Max 13mm or 0.51in cable. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “top.creative.shop” and is located in this country: CN. This item can be shipped worldwide.

Features: All Daylight Conditions, Automatic Voltage Detection
Standby Power Consumption: <0.5W
Custom Bundle: No
Protection Properties: Black Current Protection, Discharge Protection, Freeze Protection, Frost Protection, Low Voltage Protection
Wire Gauge: As Show
Power Factor: 0.99
Voltage: 45V ~ 90V
Connector Configuration: As Show
Item Length: As Show
Over Current Protection: Yes
Shipping: Free
Power Source: Solar
Size: 434x196x88 mm
Country/Region of Manufacture: Hong Kong
Material: As Show
Weight ( Kg): 4.6kg
Recommended Environment: Indoor/Outdoor
Anti-Island Protection: Yes
Model: 2021
Maximum Input Voltage: As Show
Output Frequency: 46Hz~65Hz
Charging Mode: MPPT (Maximum Power Point Tracking)
Peak Inverter Efficiency: 92%
Wattage: 1920W
Application: Agriculture/Farming, Aquaculture, Automotive, Back-Up Power, Camping/Hiking, Commercial, Electronics, Home/Garden, Marine
MPPT Function: Yes
Reverse Polarity Protection: Yes
Current Rating: As Show
Current Type: AC/DC
Current Output: As Show
Power: 2000W
Stackable: Yes
Output Wave Form: Pure Sine Wave
System Configuration: Grid-Tie
Maximum Flow Rate: As Show
Resistance Properties: Corrosion Resistant, Dust Resistant, Fade Resistant
Brand: Unbranded
Inverter Technology: Battery-Based
Color: Blue
Total Harmonic Distortion: <5%
Type: Charger/Inverter
Over Temperature Protection: Yes

Category: 2000w | Comments Off

June 16

2000W Wind Turbine 3 Phase On Grid Tie Inverter DC 45-90V WithLimiter Controller

Max Efficiency:>92% MPPT Efficiency:99%. DC/3PHASE AC 22-65V/ 45V-90V. AC 100V 110V 120V 220V 230V 240V 50hz 60hz. NEW 1000W Wind Power Grid Tie Inverter. Low cost and easy installation. Directly connect to three phase wind turbine. Much better output waveform compare with similiar GTI. Improving the efficiency of the entire solar power system. Overload protection, Anti-island protection. Short-circuit protection/Reverse polarity protection. AC output voltage and current THD. Input AC/DC Voltage Range. AC Output Voltage Range. 90-130V / 190VAC 260VAC. Dimensions (W x H x D). (1) (2) Dump load resistor connection Terminal. This terminals will connect to the dump load resistor. (3) AC socket, This socket will connect the inverter to the public grid via the AC cable. This terminals will connect to the wind turbine. The Inverter display can show many information, The main interface of the display and the icons explainations are show above. The inverter also integrate with internal limiter and external limiter function which can prevent excess power from going to the public grid. Select the internal limiter mode, inverter will work under limiter mode, output power of the inverter will be determined by load power. Select the external limiter mode, inverter need a external limiter module working with it. For more details about the limiter function, pls contact supplier. This function only useful with limiter type inverter. In this interface, the display shows real time power, PV input voltage, inside temperature, date and time. Clock And Date Setting. Set the clock and date in this page, save the setting before exit. Notes: Save the setting after you reconfigurate the working mode or backlight setting. Notes: Battery Discharge Current Mode And Battery Discharge Power Mode are not developed yet for this wind inverter. This interface will show the real time grid waveform. The grid voltage and frequency also will show in this interface. The energy interface will show the power generation curve everyday. Today KWH and Total KWH are also show in this page. AC Output Current Waveform and PF Test Of 2000W Model. Tested 2000W model at nearly full load, Output current waveform shows good pure sine wave in oscilloscope, PF value also shows in good result, 99.8% PF value. Advanced patented technology, MPPT efficiency is higher. High-quality imported components, more stable quality, lower failure rate. Significantly longer life, more than 10 years. Each inverter need to pass twice testing (20 hours) before leaving factory. Combination of SGPV does not interact. Als berechtigter Importeur sind Sie für angemessene Steuern oder Einfuhrgebühren verantwortlich. Alle Artikelstandorte in Berlin, Deutschland DE Lagerbestand DE bis DE 2 Werktage! Wenn Sie Ihren Artikel nach 20 Tagen nicht erhalten, kontaktieren Sie uns bitte umgehend für weitere Hilfe. Wir haften für alle Schäden oder Verluste, die beim Versandprozess entstehen. Einfuhrzölle, Mehrwertsteuer und andere Gebühren sind NICHT im Artikelpreis oder den Versandkosten enthalten. Als berechtigter Importeur sind Sie für angemessene Steuern oder andere Einfuhrgebühren verantwortlich. Wenn Sie mit unseren Produkten und unserem Service zufrieden sind, hinterlassen Sie uns bitte ein positives Feedback und eine 5-Sterne-Bewertung, und wir werden dasselbe für Sie tun. Bitte zögern Sie nicht, uns zu kontaktieren, wenn Sie Fragen haben. Wir werden Ihnen so schnell wie möglich antworten und unser Bestes geben, um Ihre Probleme zu lösen. Glauben Sie uns, jeder Kunde wird als unser wichtiger Schatz angesehen. Und bitte kontaktieren Sie uns Bitte beachten Sie, dass durch die folgenden Anweisungen Ihre Mitarbeit sehr geschätzt wird und die Garantiezeit automatisch verlängert werden kann. Q1: Was kann ich tun, wenn ich meinen Artikel nicht rechtzeitig erhalten habe? A1: Bitte suchen Sie den Bestelldatensatz, wählen Sie “Verkäufer kontaktieren” im Dropdown-Menü auf der rechten Seite, das zu einer neuen Seite führt, und “Wählen Sie ein Thema aus”. Q2: Wie können wir verarbeiten, wenn ich mit Ihrem Produkt nicht zufrieden bin? A2: Bitte klicken Sie unten auf “Diesen Artikel zurückgeben”, suchen Sie die folgenden 3 Optionen und wählen Sie eine aus, um fortzufahren, sollte in Ordnung sein. PS: Die Gründe für die Rücksendung sind nicht wichtig, egal welche Sie auswählen, wir müssen sie weiter bestätigen die Details per Nachricht. Als führendes und aufstrebendes Unternehmen im Hersteller- und Exportgeschäft ist Bayoung seit mehr als 10 Jahren auf Geschäfts- und Industrieprodukte, Haus- und Gartenprodukte spezialisiert. Wir glauben, dass es unsere Vision und Mission ist, innovative Produkte anzubieten mit bestem Service und konkurrenzfähigem Preis, um Sie zufriedenzustellen. Unser Ziel ist es, sicherzustellen, dass Sie genau das finden, wonach Sie suchen, und Ihnen das Aufgeben Ihrer Bestellungen zu erleichtern. Willkommen in unserem Shop! Ihre Zufriedenheit ist unsere höchste Priorität. Bitte zögern Sie nicht, uns zu kontaktieren, wenn Sie Fragen zu unseren Produkten oder Dienstleistungen haben. Unsere Arbeitszeit (Montag bis Freitag): -09:00-12:00 (GMT+8) -14:00-18:00 (GMT+8) Samstag: -09:00-12:00 (GMT+8) -14:00-17:00 (GMT+8). Alle E-Mails werden während unserer Arbeitszeit sehr schnell beantwortet, E-Mails werden normalerweise während des Urlaubs innerhalb von 24 Stunden beantwortet. Willkommen, um uns zu kontaktieren, wenn Sie ein Problem haben. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “qiu7976″ and is located in this country: CN. This item can be shipped worldwide.

Output Voltage: 1000W 90-260V AC
Input Voltage: 22V-66V
Size: 434*196*88mm
Model: GTINVT20
Maximum Input Power: 1801-2000 W
Type: Charger/Inverter
Color: Blue
Recommended Environment: Outdoor
Brand: QIU
Application: Agriculture/Farming, Aquaculture, Automotive, Back-up Power, Camping/Hiking, Commercial, Electronics, Home/Garden, Irrigation, Marine
Resistance Properties: Abrasion Resistant, Acid Resistant, Antimicrobial Resistant, Chemical Resistant, Childproof, Child Resistant, Corrosion Resistant, Dustproof, Dust Resistant, Fade Resistant
Current Rating: 11-20 A
Inverter Technology: Hybrid
Wattage: 1500-1999 W
Current Type: AC/DC
System Configuration: Grid-Tie
Power Source: Wind
Features: All Daylight Conditions, Automatic Voltage Detection, Brushless Motor, Corrosion Resistant, Daylight Operation, Fixed Guyed, Flexible, Foldable, Freestanding
Protection Properties: Anti-island Protection, Black Current Protection, Discharge Protection, Freeze Protection, Frost Protection, Lightning Protection, Low Voltage Protection, Open Circuit Protection, Overcharge Protection, Overcurrent Protection
Power: 1000 /2000 W
Current Output: 11-19 A
Charging Mode: MPPT (Maximum Power Point Tracking)
Voltage: 41-50 V

Category: 2000w | Comments Off

May 6

2000W Wind Turbine On Grid Tie Inverter Pure Sine Wave 45-90VDC 110V/ 230VAC

Model: GTINVT20
Type: Charger/Inverter
Color: Blue
Brand: Bayoung
Application: Agriculture/Farming, Aquaculture, Automotive, Back-up Power, Camping/Hiking, Commercial, Electronics, Home/Garden, Irrigation, Marine, Municipal
Resistance Properties: Abrasion Resistant, Acid Resistant, Antimicrobial Resistant, Chemical Resistant, Childproof, Child Resistant, Corrosion Resistant, Dustproof, Fade Resistant
Wattage: 1500-1999 W
Current Type: AC/DC
System Configuration: Grid-Tie
Material: Alloy
Power Source: Wind
Features: All Daylight Conditions, Automatic Voltage Detection, Bluetooth Module, Brushless Motor, Corrosion Resistant, Daylight Operation, Fixed Guyed, Flexible, Foldable, Freestanding, LCD Display
Power: 1801-2000 W
Current Output: 40-49 A
Charging Mode: MPPT (Maximum Power Point Tracking)
Ambient Temperature: -25℃- +55℃
Voltage: 45-90V

Category: 2000w | Comments Off

April 19

2000W Waterproof Solar Grid Tie Micro Inverter WIFI Control 120/230V WVC-2000R3

Micro Inverter Automatic Identification WIFI Control 120/230V WVC-2000R3 2000W. Maximum power point tracking, capable of reverse power transmission, I/O, and complete isolation. Multiple parallel stacks, adaptive voltage/frequency and voltage mode microgrid. Built-in high-accuracy electric meter, which is able to provide accurate readings. Can be used for 5G IoT platform management and application monitoring systems, etc. Forward full bridge topology, no installation and no maintenance, simple to operate. Item Type: Micro Inverter. AC Output Voltage: 120v/230v (automatic identification). Rated Output Power: 2000w. Operating Temperature Range: -40? Monitoring System: Mobile APP. Rated Frequency Range: 48-51Hz/58-61Hz. Maximum Output Efficiency: 95%. Install and fix the inverter on the bracket of the photovoltaic panel with the screws attached to the machine. Connect the DC connection plug on the photovoltaic panel to the DC input terminal of the inverter with positive and negative poles. Open the waterproof cover of the AC output connector of the inverter and connect the AC cable to the AC waterproof plug. Connect the AC output cable to the AC main cable. Repeat the first to third steps to install and connect all the inverters. Connect the AC main cable to the utility grid to start your green energy journey. 1 x Installation User Manual. 1 x AC Connection Line. 4 x Fixing Screw. 4 x Fixing Nut. 4 x Fixed Gasket. 4 x Fixed Washer. Instead of leaving negative/neutral feedback or opening a dispute. Our listing price includes the value of goods, packaging cost, and export. Please check with your country’s. We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. Post a message again because sometimes our message system may block some emails. If you are satisfied with our service, pls. Our aim is to provide Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy. We will do our up most to exceed your expectations in customer service, communication and dispatching of your orders. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “hfuisl486″ and is located in this country: CN. This item can be shipped worldwide.

AC Output Voltage: 120v/230v (automatic identification)
Brand: Unbranded
Cooling Method: Self-cooling
Country/Region of Manufacture: China
Maximum Output Efficiency: 95%
Model: WVC-2000R3
Monitoring System: Mobile APP
Operating Temperature Range: -40℃ to +65℃
Rated Frequency Range: 48-51Hz/58-61Hz
Rated Output Power: 2000w
Type: Micro Inverter
Waterproof Rating: IP65 NEMA3R

Category: 2000w | Comments Off

April 1

2000w Microinverter Mppt On Grid Tie Inverter Micro Solar Converter Regulator With Limiter Sensor

Category: 2000w | Comments Off

March 14

2000W Wind Turbine On Grid Tie Inverter DC 45-90V 3 Phase Pure Sine Wave MPPT

Max Efficiency:>92% MPPT Efficiency:99%. DC/3PHASE AC 22-65V/ 45V-90V. AC 100V 110V 120V 220V 230V 240V 50hz 60hz. NEW 1000W Wind Power Grid Tie Inverter. Low cost and easy installation. Directly connect to three phase wind turbine. Much better output waveform compare with similiar GTI. Improving the efficiency of the entire solar power system. Overload protection, Anti-island protection. Short-circuit protection/Reverse polarity protection. AC output voltage and current THD. Input AC/DC Voltage Range. AC Output Voltage Range. 90-130V / 190VAC 260VAC. Dimensions (W x H x D). (1) (2) Dump load resistor connection Terminal. This terminals will connect to the dump load resistor. (3) AC socket, This socket will connect the inverter to the public grid via the AC cable. This terminals will connect to the wind turbine. The Inverter display can show many information, The main interface of the display and the icons explainations are show above. The inverter also integrate with internal limiter and external limiter function which can prevent excess power from going to the public grid. Select the internal limiter mode, inverter will work under limiter mode, output power of the inverter will be determined by load power. Select the external limiter mode, inverter need a external limiter module working with it. For more details about the limiter function, pls contact supplier. This function only useful with limiter type inverter. In this interface, the display shows real time power, PV input voltage, inside temperature, date and time. Clock And Date Setting. Set the clock and date in this page, save the setting before exit. Notes: Save the setting after you reconfigurate the working mode or backlight setting. Notes: Battery Discharge Current Mode And Battery Discharge Power Mode are not developed yet for this wind inverter. This interface will show the real time grid waveform. The grid voltage and frequency also will show in this interface. The energy interface will show the power generation curve everyday. Today KWH and Total KWH are also show in this page. AC Output Current Waveform and PF Test Of 2000W Model. Tested 2000W model at nearly full load, Output current waveform shows good pure sine wave in oscilloscope, PF value also shows in good result, 99.8% PF value. Advanced patented technology, MPPT efficiency is higher. High-quality imported components, more stable quality, lower failure rate. Significantly longer life, more than 10 years. Each inverter need to pass twice testing (20 hours) before leaving factory. Combination of SGPV does not interact. Als berechtigter Importeur sind Sie für angemessene Steuern oder Einfuhrgebühren verantwortlich. Alle Artikelstandorte in Berlin, Deutschland DE Lagerbestand DE bis DE 2 Werktage! Wenn Sie Ihren Artikel nach 20 Tagen nicht erhalten, kontaktieren Sie uns bitte umgehend für weitere Hilfe. Wir haften für alle Schäden oder Verluste, die beim Versandprozess entstehen. Einfuhrzölle, Mehrwertsteuer und andere Gebühren sind NICHT im Artikelpreis oder den Versandkosten enthalten. Als berechtigter Importeur sind Sie für angemessene Steuern oder andere Einfuhrgebühren verantwortlich. Wenn Sie mit unseren Produkten und unserem Service zufrieden sind, hinterlassen Sie uns bitte ein positives Feedback und eine 5-Sterne-Bewertung, und wir werden dasselbe für Sie tun. Bitte zögern Sie nicht, uns zu kontaktieren, wenn Sie Fragen haben. Wir werden Ihnen so schnell wie möglich antworten und unser Bestes geben, um Ihre Probleme zu lösen. Glauben Sie uns, jeder Kunde wird als unser wichtiger Schatz angesehen. Und bitte kontaktieren Sie uns Bitte beachten Sie, dass durch die folgenden Anweisungen Ihre Mitarbeit sehr geschätzt wird und die Garantiezeit automatisch verlängert werden kann. Q1: Was kann ich tun, wenn ich meinen Artikel nicht rechtzeitig erhalten habe? A1: Bitte suchen Sie den Bestelldatensatz, wählen Sie “Verkäufer kontaktieren” im Dropdown-Menü auf der rechten Seite, das zu einer neuen Seite führt, und “Wählen Sie ein Thema aus”. Q2: Wie können wir verarbeiten, wenn ich mit Ihrem Produkt nicht zufrieden bin? A2: Bitte klicken Sie unten auf “Diesen Artikel zurückgeben”, suchen Sie die folgenden 3 Optionen und wählen Sie eine aus, um fortzufahren, sollte in Ordnung sein. PS: Die Gründe für die Rücksendung sind nicht wichtig, egal welche Sie auswählen, wir müssen sie weiter bestätigen die Details per Nachricht. Als führendes und aufstrebendes Unternehmen im Hersteller- und Exportgeschäft ist Bayoung seit mehr als 10 Jahren auf Geschäfts- und Industrieprodukte, Haus- und Gartenprodukte spezialisiert. Wir glauben, dass es unsere Vision und Mission ist, innovative Produkte anzubieten mit bestem Service und konkurrenzfähigem Preis, um Sie zufriedenzustellen. Unser Ziel ist es, sicherzustellen, dass Sie genau das finden, wonach Sie suchen, und Ihnen das Aufgeben Ihrer Bestellungen zu erleichtern. Willkommen in unserem Shop! Ihre Zufriedenheit ist unsere höchste Priorität. Bitte zögern Sie nicht, uns zu kontaktieren, wenn Sie Fragen zu unseren Produkten oder Dienstleistungen haben. Unsere Arbeitszeit (Montag bis Freitag): -09:00-12:00 (GMT+8) -14:00-18:00 (GMT+8) Samstag: -09:00-12:00 (GMT+8) -14:00-17:00 (GMT+8). Alle E-Mails werden während unserer Arbeitszeit sehr schnell beantwortet, E-Mails werden normalerweise während des Urlaubs innerhalb von 24 Stunden beantwortet. Willkommen, um uns zu kontaktieren, wenn Sie ein Problem haben. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “bayoung-electronic” and is located in this country: CN. This item can be shipped worldwide.

Output Voltage: 2000W 180-260V AC
Input Voltage: 45V-96V
Size: 434*196*88mm
Model: GTINVT20
Maximum Input Power: 1801-2000 W
Type: Charger/Inverter
Color: Blue
Recommended Environment: Outdoor
Brand: Bayoung
Application: Agriculture/Farming, Aquaculture, Automotive, Back-up Power, Camping/Hiking, Commercial, Electronics, Home/Garden, Irrigation, Marine
Resistance Properties: Abrasion Resistant, Acid Resistant, Antimicrobial Resistant, Chemical Resistant, Childproof, Child Resistant, Corrosion Resistant, Dustproof, Dust Resistant, Fade Resistant
Current Rating: 11-20 A
Inverter Technology: Hybrid
Wattage: 1500-1999 W
Current Type: AC/DC
System Configuration: Grid-Tie
Power Source: Wind
Features: All Daylight Conditions, Automatic Voltage Detection, Brushless Motor, Corrosion Resistant, Daylight Operation, Fixed Guyed, Flexible, Foldable, Freestanding
Protection Properties: Anti-island Protection, Black Current Protection, Discharge Protection, Freeze Protection, Frost Protection, Lightning Protection, Low Voltage Protection, Open Circuit Protection, Overcharge Protection, Overcurrent Protection
Power: 1000 /2000 W
Current Output: 11-19 A
Charging Mode: MPPT (Maximum Power Point Tracking)
Voltage: 41-50 V

Category: 2000w | Comments Off

November 2024
M	T	W	T	F	S	S
« Oct
				1	2	3
4	5	6	7	8	9	10
11	12	13	14	15	16	17
18	19	20	21	22	23	24
25	26	27	28	29	30