1000W Grid Tie Inverter Stackable with Power Limiter Sensor DC26-60V Solar Input

1000W Grid Tie Inverter Stackable with Power Limiter Sensor DC26-60V Solar Input. Grid Tie Inverter DC Input 22-60V(Starting Voltage 26V). Grid Tie Inverter with Limiter Sensor. Delivers only the power needed by the load. Voc (solar panel) must not exceed 60V to ensure good output efficiency. Battery discharge power mode, Can auto regulate depth of discharge of the battery bank. Micro Inverter Max Power Point Tracking and AC Stackable, Anti-island protection. Intelligent LCD display various parameters. 1000W Grid Tie Inverter converts DC power produced by Solar Panels to AC, connects to the grid and feed all of the power available from the panels to the AC load. Smart Micro inverter is synchronized and in-phase with the utility grid. The electric apparatus in the house will use power from the inverter first. If the Solar Panel is producing less power and the GTI cannot deliver all the power needed by the load, then power will be supplemented by the Grid. Why we produced the GRID TIE INVERTER WITH LIMITER? It is in response to the overwhelming clamor from our customers for a product that can control the amount of power that the grid tie inverters (GTI) can generate so that the amount of excess power produced by the solar panels are reduced to insignificant levels, if not eliminated — because in some countries, the producer pays for the excess power it gives to the distribution grid. This is because the electric power meters (the one provided by the electricity provider in the area) are not aware of the direction of power flow. In other words it only adds even if power is exported to the grid, thus, the consumers will be charged for power even if it is given to the grid, and this is the problem. This is the 2nd generation grid tie inverter with limiter. But in case customer install inverter far away from the main circuit breaker, we also enable the 2nd GTIL work with stand-alone limiter, we call this-external limiter. For sure, the inverter can work under normal Grid tie-no limit mode, just set on the nice LCD and save your setting. The 22-60V model inverter will start up at 26V, after starting, the inverter can work in 22V-60V. Solar Panel Voc cannot be higher than 60V. Vmp 30v-48v Solar panels connected in Parallel suggested, for example : 4 pcs 200-260w (Vmp 31v solar panels in parallel). Rated Power (Peak/Continuous): 1000W / 900W DC Input Voltage: 22V60V Peak Power Tracking Voltage: 2654V AC Output Voltage Range:190260V Grid Tie Power Inverter starting voltage 26V AC Output Frequency Range: 46Hz65Hz Stackable: Just for AC Output Output Wareform: Pure sine wave. 1 x On Grid Inverter with Limiter(built-in) 1 x AC cable 1 x Internal type Limiter clamp with sensor & 2m cable 1 x English User Manual. Stackable connectionThe purpose is let small power inverter become high-power inverter. Installation of GTIL With Internal Limiter. How to use the Power Limit function? Connects/clamps to one hot wire after the Main Circuit Breaker. Converts the magnetic field created by the flow of current in the wire into small AC voltage and current which is proportional to the power that passes through the wire. This installation is not require an additional limiter module, Installation is much easier. Clamp the current sensor cable to one of the hot wire to measure the current, the internal limiter will auto detect the load power and control the inverter output power, excess power will be well controlled. Limiter Setting on the LCD of the inverter. The GTIL include three working mode:Work as normal GTI without power limitation. Work under Internal limiter mode and Work under External limiter mode, Pls make your setting on the LCD and save it, details setting operation, pls read the GTI manual. Bat or solar limited current mode. This function is usable while using with battery. The setted voltage will be the cut off voltage, this means while battery discharged to the setted voltage point or below setted point, inverter will auto disconnect from the battery and stop operating. This can prevent the battery from over discharged. The setted current means inverter will discharge the battery at this current level. MPPT function of the inverter will auto invalid when working under this setting. Set is 0.1V/step. Set is 0.1V/Step. Sellers are not responsible for service transit time. Transit times are provided by the carrier, exclude weekends and holidays, and may vary with package origin and destination, particularly during peak periods. (Only for Business Express). Feedback is very important to us. Please do not give us any bad feedback. If you can do as we say, we will be very grateful. Please give us the opportunity to resolve any problem. The item “1000W Grid Tie Inverter Stackable with Power Limiter Sensor DC26-60V Solar Input” is in sale since Wednesday, August 8, 2018. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “maihuiyan” and is located in shenzhen. This item can be shipped worldwide.

Model: 1000W Grid Tie Inverter
Modified Item: No
Country/Region of Manufacture: China
Custom Bundle: Yes
Input Voltage: DC26V-60V
Output Wave Form: Pure Sine Wave
Output Frequency: 46Hz~65Hz
Featured Refinements: MPPT
AC Input Voltage: AC110V/240V Auto Switch
Type: Grid Tie Inverter
MPN: Does Not Apply
Brand: Y&H
Non-Domestic Product: No
Voltage: DC26V-60V

Category: 1000w | Comments Off

August 26

1000w Solar Power Grid Tie Inverter with Limiter sensor Wifi Plug DC 22-65V

Pure Sine Wave Inverter. 300W Pure Sine Wave Inverter. 500W Pure Sine Wave Inverter. 1000W Pure Sine Wave Inverter. 1500W Pure Sine Wave Inverter. 2000W Pure Sine Wave Inverter. 2500W Pure Sine Wave Inverter. Grid Tie Solar Inverter. You may also like. 1000w Solar Power Grid Tie Inverter with Limiter sensor Wifi Plug DC 22-65V. Specification: –1000W MAX power. -AC 110V 120V 220V 230V 240V (auto selected). With Battery Discharge Function / Voltage Adjustable. Limiter sensor and clamp 2mters cable. When the sun shines, the solar panels will produces DC voltage, and the grid tie inverter will change the DC voltage to AC voltage and puts out power to the home grid. The electric apparatus in the house will use power from the inverter first. The power meter will SLOW down. If the Solar Panel is producing less power and the GTI cannot deliver all the power needed by the load, then power will be supplemented by the Grid. Power Meters (Except smart meter) are not aware of the direction of Power flow. The user then pays for the power exported and delivered by the Grid. We have the limiter type inverters. If you do not want to sell electric power. Input DC Voltage Range. Peak power tracking voltage. AC Output Voltage Range. Dimensions (W x H x D). The 22-65V model inverter will start up at 25V, after starting, the inverter can work in 22V-65V. Vmp 30v-60v Solar panels connected in Parallel suggested, for example : 4 pcs 200-260w (Vmp 31v solar panels in parallel). Solar Grid Inverter with Limiter(built-in). Internal type Limiter clamp with sensor & 2m cable. 1 unit inverter installation / more units inverters in parallel. The inverter AC output can be connected in the AC plug of grid in the house. Optional Function : Wi-Fi port. Higher MPPT efficiency , Max 99%. These charges are the buyers responsibility. My goal is to make sure you are happy and having the pleasant shopping with us. Yueqing Reliable Electric Is a leading company in the development, manufacturing and marketing of advanced power inverter and systems for mobile power markets and PV industry since 2009. The companys power inverters convert and control raw electrical power from any renewable or back up ower source into high quality pure sine wave power. Our product range from off grid high frequency pure sine wave inverter (150W to 8000W) and grid tie inverter (200W to 2000W). Most of them are hot products in the market such as. High frequency pure sine wave inverter up to 8000w with stable performance, with LED and LCD display; 2. High advanced LCD display 2000w grid tie inverter with 45-90vdc input. Build-in dump load for small grid PV system 3. The highly compact designed micro inverter for 0.82kgs with power line carrier-current communication, it can built up a megawatt solar power station. Our pure sine wave inverters meet the needs of a wide range of application such as for vehicle , marine, train or any mobile power station. The special DC volt 36V, 72V , 96V, 110VDC ect can be selected for special application. The pure sine wave inverter products are certified to EMC testing in Australia and CE FCC, RoHS, approved. Reliable Electric is identified as one of the most famous trademarks in China for pure sine wave inverter for its relaible power inverter, reasonable price and responsible service. Reliable electric is committed to improving the environment and the renewable energy industry and continues to develop more efficient and cost-effective solutions to bring more green electricity to our lives. Any questions will be replied within 24 hours except the weekend and statuary holiday in Chinese Beijing Time. The item “1000w Solar Power Grid Tie Inverter with Limiter sensor Wifi Plug DC 22-65V” is in sale since Saturday, May 5, 2018. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “reliablepower” and is located in Yueqing, Zhejiang. This item can be shipped worldwide.

Featured Refinements: Grid Tie Inverter
Energy Type: Solar
RMS Power: 1000W
Features: Solar
Model: Grid tie inverter
Country/Region of Manufacture: China
Interface: Wi-Fi
Type: Grid Tie Inverter
MPN: GTI1000241224WI
Brand: WZRELB
Voltage: 36 V

Category: 1000w | Comments Off

August 20

1000W Wind Turbine on Grid Tie Inverter Limiter 3 Phase Wtih Wifi Port

You may also like. 1000W Wind Turbine on Grid Tie Inverter Limiter Home Power Sun 1000G2 WAL. NEW 1000W Wind Power Grid Tie Inverter. With dump load controller and resistor. Max Efficiency:>92% /MPPT Efficiency:99%. DC/AC 22V-60V / 45V-90V (selected). AC 100V 110V 120V 220V 230V 240V 50hz 60hz. Low cost and easy installation. Directly connect to three phase wind turbine. Much better output waveform compare with similiar GTI. Improving the efficiency of the entire solar power system. Overload protection , Anti-island protection. Short-circuit protection/Reverse polarity protection. AC output voltage and current THD<5%, PF>99%. Build in dump load function. Build in Limiter (internal type). Introduction of Sunshine Grid Tie Inverter for Wind Turbine. The Wind Grid Tie Power Inverter is the world’s most technologically advanced inverter for use in utility-interactive applications. This manual details the safe installation and operation of the The Wind Grid Tie Inverter. This integrated system maximizes energy harvest, increases system reliability, and implifies design, installation and management. The small type wind grid tie power inverter can obtain the wind energy from wind turbine, and can tie to the grid through its output cables with no extra equipment. The installation is very convenient and reliable. We call the system combining with small grid tie inverter and wind turbine as’SGWT’. The system includes wind turbine and small grid tie inverter and installation kit, and some “SGWT” also will include controller, dump load resistor. The inverter can be connected to any outlets of utility grid at house. The small grid tie inverter monitors the volume, frequency and phase of the home utility grid, then produce pure sine wave AC power that the frequency and phase are as same as the grid’s, and the volume is a bit higher than the grid’s, then according to the current controlled PWM, to control the output power to the grid. The small grid tie inverter just puts out power when the home grid is on. When the wind turbine is rotating, and the output of the voltage is in the range of the rated input voltage of the inverter, the wind turbine will produces power, and the grid tie inverter will change the power from wind turbine to the home grid. When the total power of electric apparatus that are using in the house is larger than the output power of the inverters, these. Power from the inverters will be consumed in the house, this will slow down the power meter, otherwise, the difference of the output power of the inverter between the total used power of the apparatus will go out from the house to the out grid. Input Voltage Range:22-60vdc/45-90vdc (test point is at the output of the inside rectifier) , Peak power tracking voltage:25-60v/50-90v , Max output power:1000w , Nominal Voltage Range: 95-140v/185-265v , Max Efficiency:>92% , MPPT Efficiency:99%. Input AC/DC Voltage Range. AC Output Voltage Range. Dimensions (W x H x D). 322 x 196 x 88 mm. Wind Grid Tie Inverter Installation. Considering the total capacity of the grid tie power system that you need. The total capacity of the whole grid tie power system is according to your power consumption in the site that you want to install, or how much power that you want it to feed to the utility grid. Actually, the volume is just according to your willingness, because when the total power of electric appliances that are being used in the installation site is larger than the output power of the grid tie power system, these power from the system will be consumed in the site, this will slow down the power meter, otherwise, the difference of the output power from the system between the total used power of the appliances will feed to the utility grid. For example, if you want to install a grid tie power system in your house, you could decide the total power volume according to the total power the appliances that you use in your house, maybe the consumption of total energy in per day is about 5KWH, then you should realize the averaged speed of the wind in per day at your site, check the power to the speed of the wind curve from the specifications of the wind turbine, then you can estimate the average power that the wind turbine can generate, actually the real average power the wind turbine can generate at your side is not easy to estimate, you need to check the history data of the climate, because it will vary every day according to the climate, just assume a 1KW rated wind turbine is suitable for the grid tie power system that you plan to set, with this capacity of the system, it can supply all power consumption in whole year. When grid tie power system is working, sometimes, there is extra power feed to utility grid if the power from the grid tie system is larger than the power consumed by the appliances in your house, and sometimes will not when it is not larger. If you use a 1KW wind turbine, then we call the “GTWT” system is 1KW grid tie power system, of course, you can install 500W grid tie power system or 2KW grid tie inverter, even more large capacity or more small capacity grid tie inverter, it doesn’t matter. But ifthe capacity is too big, you should consider the volume of AC system of your house can hold the feeded power. Choosing applicable wind turbine for Sunshine Grid Tie Inverter. The most kinds of specifications that the factories marked about the wind turbines. 1, Starting wind speed(m/s). 2, Cut-in wind speed(m/s). 3, Rated wind speed(m/s). 6, Safe wind speed(m/s). 7, Rated DC voltage. You need to choose a wind turbine that the rated power can meet the power consumption for your using. When you choose a wind turbine, you also need to consider ahead what model gird tie inverter of SUN series you want to use. Wind turbines have two output type, one is AC output type, and another is DC output type, if the wind turbine is DC output type, it must be integrated with a rectifier. So if the wind turbine is AC output type, you should use WAL model of SUN series grid tie inverter, if the wind turbine is DC output type, then you should use WDL model of SUN series grid tie inverter. Selecting accessory for installation of the Grid Tie Power System. The accessory for grid tie power system including. 1, Connecting cables will be connected with wind turbine and inverters. 4, Power meter(Optional). 5, Bracket for wind turbine installation(not included in this user manual). Selecting correct model of Sunshine Grid Tie Inverter. When finished step1 to step3, then you can select a correct model of SUN series inverter. If the wind turbine is DC output type, then you should choose WDL model inverters, and the input DC voltage range of the inverter should fit the DC output voltage of the wind turbine, the rated power of the inverter should also fit the max. Power of the wind turbine, and the AC output of the inverter should fit the standard of AC utility grid. If the wind turbine is AC output type, then you should choose WAL model inverters. Most factories don’t supply the AC rated voltage, just supply DC rated voltage, so our WAL also supply the DC input range, please check the DC rated voltage of wind turbine should fit the DC input range of the grid tie inverter. Installing wind turbine to suitable place. Installing the wind turbine of the “SGWT” to suitable location where the wind is strong enough to drive the wind turbine. Warning: Please read the user manual of wind turbine before you install the wind turbine, don’t install the wind turbine under high wind. Warning: Ensure using strong braket to fix the wind turbine to avoid the danger under high wind. Warning: The blades of the wind turbine should be taken down before the hurricane is coming. Installing Sunshine Grid Tie Inverter to suitable place. Place the Grid Tie Inverter on a surface protected from direct sunlight, high temperatures, and water. The inverter requires at least 150mm of clearance around itself for ventilation. The inverters are for indoor use, can’t use at outdoor. You can use screws to fix the inverter to the surface, because some models of Sunshine grid tie inverter have fans on the bottom cover, so the surface should be flat. Connecting Sunshine Grid Tie Power System with cables and connectors. Connecting the Grid Tie Power System with Cables and Connectors After finished from Step1 to Step6, you should connect the wind turbine and inverter with cables and connectors to integrate the Sunshine Grid Tie System. Connect the ground terminal of the wind turbine to the NEC approved AC grounding electrode. Connect the grid tie inverters to the grounded racking using a grounding washer approved for the racking. The ground wire of the AC cables is connnected to the housing of inverter when the AC cables is connected to the inverters, so when the AC plug is inserted to the socket of AC outlet of utility grid in the house, the ground pin of the socket must be connected to the Earth ground. Connecting the wind turbine output cables after complete from Step1 to Step8. Warning: Before connect the wind turbine output cables to grid tie inverter, you should stop the the rotating of the wind turbine just in order to avoid the sparkle when connect the cables. WAL model of grid tie invereter connected with AC output type of wind turbine. Connecting two 1000G2-WAL with a max. Power is 2KW wind turbine. How to select a wind grid tie inverter? Max output power of the wind turbine. 500w-1000w wind turbines , suggest 1000w inverter. 1000w-2000w wind turbines , suggest 2000w turbine. 24v 36v 48v wind turbines , suggest 22-65v inverter. 48v 60v 72v 90V wind turbines , suggest 45-90v inverter. Some wind turbines has been built-in a regulator , the output is DC , please choose DC input type wind inverter. How to use a grid tie inverter with battery and wind turbine? If the user want to use a wind turbine to charge battery first , and output excess power to the grid , we suggest the battery function grid tie inverter(solar power GTI , battery function). The wind inverter can not work with battery well. What is the dump load controller/resistor? The dump load controller/resistor is used to protect the wind turbine and inverter. If the wind speed is too fast , the voltage will be high , it will work to reduce the wind turbines runing speed and voltage. User manual of the wind power inverter. We will message you if it happens. We understand the concerns and frustrations you might have, and will do our endeavor to resolve the issues. Please give us the opportunity to resolve any problem. The item “1000W Wind Turbine on Grid Tie Inverter Limiter 3 Phase Wtih Wifi Port” is in sale since Sunday, January 14, 2018. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “yoosmart2009″ and is located in Shenzhen. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.

Brand: SUN
MPN: SUN-1000G2-WAL
Country/Region of Manufacture: China
Input Voltage: AC 22v-60v or 45v-90v Optional
Output Voltage: 100V 110V 120V 220V 230V 240V auto
Output Frequency: 45-65Hz
Standby Power Consumption: <0.5w
Total Harmonic Distortion: <5%
Peak Inverter Efficiency: 92%
MPPT Efficiency: 99%
Power Factor: 0.99
Output Wave Form: Pure Sine Wave
Featured Refinements: MPPT
Bundle Listing: No

Category: 1000w | Comments Off

August 19

1000W Solar On Grid Tie Inverter For 10.8V45V DC Panel To 110V / 220V AC MPPT

Unique circuit design, choice of import industrial electronic components, higher efficiency, more stable performance. Efficiency more than 99%, faster and more sensitive reaction, more reliable. Parallel type design for DC input and modularization design for inverter, small volume, distributed installation easy for system configuration, flexible for combination, strong expansibility of system. Adopting high-frequency isolation transformer type, high efficiency, and high security. Perfect electrical protection function. Aluminum alloy housing, not rust, heat-resisting and cold-resistant as well as anti-corrosion. Getting electronic circuit design, apperance design and other core technology Patents. Smart Grid Tie inverter is a co:pact unit, which directly converts direct current into alternating current for powering appliances and/or office equipments and connecting to utility grid. Smart Micro inverter specially optimized design to work with modularization of DC power supplies which includes the mainstream solar modules. 18V(36cells), 24V(60 cells) and 36V (72cells). Moncrystal and/or polycrystalline solar panels and batteries. Distributed modularization design philosophy for smart micro inverter insures the productiveness of the whole system and will not affect by a single point of failure. Each Smart Micro inverter is individually connected to each PV module in the array. This unique configuation means that an individual Maximum Peak Power Point Tracker(MPPT) controls each PV modules in the array which may be affected by shading, soiling, orientation or mismatch, etc. Smart Micro inverter insures top performance for maximizing energy production from the whole PV system and gets return on investment in less time. The item “1000W Solar On Grid Tie Inverter For 10.8V45V DC Panel To 110V / 220V AC MPPT” is in sale since Thursday, April 26, 2018. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “homegarden0722″ and is located in Shenzhen. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.

Brand: Unbranded/Generic
Model: 1000W 18V/36V Solar Inverter
Country/Region of Manufacture: China
Certification: CE ROHS
Type: Pure sine wave inverter
Function: With MPPT
Solar Panel: 18V30V/36V 36/60/72cells panel
Frequency: 50Hz/60Hz(Auto control)
Input: DC 10.8-28V/ 20-45V
MPN: 5483224

Category: 1000w | Comments Off

August 6

1000W Grid Tie Solar System 10100W Solar Panel & Inverter for 12V RV Home US

This is 1KW solar panel system. 10x100W 18V poly solar panel with MC4 connector. 1 x 1000W 12V 220V grid tie inverter. 1 pc 10 meters 4mm²extension solar cable with MC4 connector 5m. Red and 5m black. 9 Pair Y MC PV Solar Cable Branch Connector. 100W 18V poly solar panel, charge 12V battery. Short circuit current (Isc). Temperate coefficient of Isc. (010+/- 0.01)%/. Temperate coefficient of Voc. (0.38 +/-0.01)%/. Temperate coefficient of power Voc. Waterproof junction box, can be customized. 90% with in 10 years. 80% with in 25 years. Kind of glass and its thickness. Low Iron, high transparency tempered glass of 3.2mm. 665x1000x35mm26.2″x39.4″x1.4. 1000W 12V 220V grid tie inverter. Recommend solar panel power. Max input DC power. Max Output AC Power. AC Output Voltage Range. AC Output Frequency Range. DC Input Voltage Range. Total Harmonic Distortion(THD). Output short circuit protection. 0-99%(indoor use only). MC4 with 5 Meters extension cables TUV solar Pv cable UV and ozone resistant Red or Black 4mm². (5m red cable and 5m black cable). For movable, suspended or fixed installation in photovoltaic systems at temperatures ranging from -40 to +120 For use indoors, outdoors, in explosive areas, and in industrial, commercial, and agricultural applications. Suitable for use inside and connected to insulated equipment(protection class II). Ambient temperature up to +120 (movable and fixed). Designed according to IEC 60216:constant temperature 120=20.000h(=2.3years), constant temperature max. TUV 2 PfG 1169/08.2007. UV and ozone resistant. Protected against short circuits and ground leakages. 1 Pair Y10 MC4 branch connectors. Brand new and high quality. With excellent aging resistance and UV endurance. Compatible with MC4 solar connector. It can be used in harsh environment. It does not need extra instruments for the removal of plugs. Removal will not cause any harm to plugs. Load capability with big current and high voltage. Good ability of resistance and machine shocking. Created seal, design of water proof and dust proof. Eligible plastic material has marvelous performances of high low temperature, fireproof , anti. Ultraviolet rays and applied to the long-time operation outside. The item “1000W Grid Tie Solar System 10100W Solar Panel & Inverter for 12V RV Home US” is in sale since Thursday, April 19, 2018. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Solar Panels”. The seller is “goodenergytools” and is located in CN. This item can be shipped worldwide.

Brand: ECO
Model: 1 KW solar panel grid tie system
MPN: ECO-P100-IY1000EUM-10
Wattage: 1000W
Features: Corrosion Resistant
Application: Home/Garden
Voltage: 12 V
Type: Solar System/Kit
EAN: 0607052793753
Marke: ECO-WORTHY
Unit Quantity: 1
Unit Type: kg
Herstellernummer: ECO-P100-IY1000EUM-10
Produktart: Solarzelle/Eigenbau
Note: Can not be connected to the battery
Spannung: 12 V
Connector: 1 Pair Y10 MC PV Solar Cable Branch Connector
Panel: 10 pcs 100W poly solar modules
Inverter: 1000W 12V 220V grid tie inverter

Category: 1000w | Comments Off

August 4

1KW 1000W 12V Grid Tie Inverter With MPPT Function for Home Solar Power System

Home & Farm Appliances. You may also like. 1KW 1000W 12V Grid Tie Inverter W/ MPPT Function for Home Solar Power System. Pure Sine Wave Output. Fed the power to city net. No battery for solar system anymore, really environment friendly. Wide range input voltage. Reverse your power meter cut your bill. Max power point tracking function. Recommend solar panel power. Max input DC power. Max Output AC Power. AC Output Voltage Range. AC Output Frequency Range. DC Input Voltage Range. Total Harmonic Distortion(THD). Output short circuit protection. 0-99%(indoor use only). Red terminal: Connect DC positive, black terminal: Connect DC negative. AC socket: Connect to the mains. Put the side of the AC cord which has holes into the. With 3 foot outlet and the other side of the AC cord to home 3PIN AC outlet. 3Switch: Connect the connections in right way, then turn on the switch. The inverter starts to work. Please pay attention of the voltage when use the product. The voltage is from 10.8-28V, if is not these voltage the product may broken. Non-professionals do not disassemble. Only qualified personnel may repair this product. Please install inverter in the low humidity and well-ventilated place to avoid the inverter over-heating, and clear around the inflammable and explosive materials. When using this product, avoid children touching, playing, to avoid electric shock. Optimal length of the DC input line 8M or less, long cable will allow solar panels to the inverter. DC voltage drop caused by wear and tear. Connected to a power outlet to provide AC. The load side of our grid tie inverter can not connect to the household appliances directly, it should be connected to your local state power grid directly. Our grid tie inverter can not be connected to the wind turbine , battery or solar charge controller directly. The corresponding inverter type for only solar panel. 110.5-28v model for open-circuit voltage 16-22v and operating voltage 15V-18v solar panel. 2 22-60v model for open-circuit voltage 33-48v and operating voltage 30V -36V solar panel. When the voltage range of the solar panel is exceed the specified voltage description, the inverter will be easily to broken. 1 piece 1000W 12V to 110V Grid Tie inverter. Goods in stock in USA, goods will be set by UPS. The most important thing is. We strive to serve our customers and resolve any issues. We appreciate your business and consideration. We are manufacturers and wholesalers of solar panels and renewable energy products. Our solar business has been established since 2002. Our engineers are experienced in solar and related accessories. OEM and ODM services are both available. We would like to be your best supplier in China. Please take our working time into account. We will reply you in time, if you are in our working time. Public holidays in China is not available for message reply. The item “1KW 1000W 12V Grid Tie Inverter With MPPT Function for Home Solar Power System” is in sale since Friday, January 29, 2016. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “centools” and is located in CN. This item can be shipped worldwide.

Brand: ECO-WORTHY
Model: 1KW Grid tie inverter
MPN: GI1000-12110-1
Country/Region of Manufacture: China
Max input DC power: 1200Wp
Max Output AC Power: 1000W
Output Current Waveform: Pure Sine
Ambient temperature: -25 ~60
UPC: 607052792145

Category: 1000w | Comments Off

August 1

1000W On Grid Tie Inverter With Limiter For Solar Panels 22-65V/45-90V DC System

You may also like. 1000W On Grid Tie Inverter With Limiter For Solar Panels 22-65V/45-90V DC System. Why we produced the GRID TIE INVERTER WITH LIMITER? It is in response to the overwhelming clamor from our customers for a product that can control the amount of power that the grid tie inverters (GTI) can generate so that the amount of excess power produced by the solar panels are reduced to insignificant levels, if not eliminated — because in some countries, the producer pays for the excess power it gives to the distribution grid. This is because the electric power meters (the one provided by the electricity provider in the area) are not aware of the direction of power flow. In other words it only adds even if power is exported to the grid, thus, the consumers will be charged for power even if it is given to the grid, and this is the problem. This is the 2nd generation grid tie inverter with limiter. But in case customer install inverter far away from the main circuit breaker, we also enable the 2nd GTIL work with stand-alone limiter, we call this-external limiter. For sure, the inverter can work under normal Grid tie-no limit mode, just set on the nice LCD and save your setting. New upgraded firmware enable battery or solar limiter current and power model. User can set the maximum output power of inverter , this can make the inverter work at cooler contition as user want and extend the lifespan of the inverter. User can set kick in/off voltage of the inverter which can flexible using with battery bank depend on users mind and can prevent battery bank from over discharged. Gereantion 1000w Standard Solar Power Grid Tie Inverter. DC 22V-65V or 45V-90V (Optional). AC 110V 120V 220V 230V 240V (auto selected). With Battery Discharge Function / Voltage Adjustable. Wi-Fi port (optional). Power Limiter function built-in. SGPV and Grid Tie Inverter. SGPV – small solar grid tie inverter and solar panels. The inverter can obtain the solar energy from solar panel, and tie to the grid through its output cables with no extra equipment. The installation is very convenient and reliable. When the sun shines, the solar panels will produces DC voltage, and the grid tie inverter will change the DC voltage to AC voltage and puts out power to the home grid. The electric apparatus in the house will use power from the inverter first. The power meter will SLOW down. Advantage of the 2G grid tie inverter? The 2nd Generation grid tie inverter, new technical , Higher efficiency. Higher MPPT efficiency , Max 99%. Multiple intelligent protection to ensure safe use. Wide DC input voltage , suitable for all types solar panels. Easy to install and easy to operate. UL1741, IEEE1547, VDE4105 standards. Power Limiter function , Battery discharge function support. Pure sine wave form output , THD < 5%. Input DC Voltage Range. Peak power tracking voltage. AC Output Voltage Range. Dimensions (W x H x D). How to choose the inverter. The 22-65V model inverter will start up at 25V, after starting, the inverter can work in 22V-65V. Vmp 30v-60v Solar panels connected in Parallel suggested, for example : 4 pcs 200-260w (Vmp 31v solar panels in parallel). The 45-90V model inverter will start up at 49.5V, after starting, the inverter can work in 45V-90V. Vmp 50v-90v Solar panels in parallel suggested ; for Vmp 25V-45v solar panels , we suggest 2 panels in series , the total voltage will be 50V-90V , then connect 2 or more groups in parallel. For example : 2 pcs 200-260w (Vmp 31v) connected in series , 2 groups in parallel. About the limiter function. The Limiter function has been built-in. But, there is not limiter sensor/clamp with this product. The function is turned off. If customer want to use limiter function , please order limiter sensor/clamp in the future , or order a limiter model inverter. How to use the grid tie inverter? 1 unit inverter installation / more units inverters in parallel. The inverter AC output can be connected in the AC plug of grid in the house. LCD display and operation. Bat or solar limited current mode. This function is usable while using with battery. The setted voltage will be the cut off voltage, this means while battery discharged to the setted voltage point or below setted point, inverter will auto disconnect from the battery and stop operating. This can prevent the battery from over discharged. The setted current means inverter will discharge the battery at this current level. MPPT function of the inverter will auto invalid when working under this setting. Set is 0.1V/step. Set is 0.1V/Step. Note : Limiter model must use limiter sensor/clamp , there is not limiter sensor and clamp with this model inverter. If the Solar Panel is producing less power and the GTI cannot deliver all the power needed by the load, then powe will be supplemented by the Grid. Power Meters (Except smart meter) are not aware of the direction of Power flow. The user then pays for the power exported and delivered by the Grid. Optional Function : Wi-Fi port. We will message you if it happens. We understand the concerns and frustrations you might have, and will do our endeavor to resolve the issues. Please give us the opportunity to resolve any problem. The item "1000W On Grid Tie Inverter With Limiter For Solar Panels 22-65V/45-90V DC System" is in sale since Friday, April 27, 2018. This item is in the category "Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters". The seller is "yoosmart2009" and is located in Los Angeles. This item can be shipped to North, South, or Latin America.

Brand: SUN
MPN: SUN-1000G2-LCD
Country/Region of Manufacture: China
Input Voltage: 22v-60v or 45v-90v Optional
Output Voltage: 100V 110V 120V 220V 230V 240V auto
Output Frequency: 45-65Hz
Standby Power Consumption: <0.5w
Total Harmonic Distortion: <5%
Peak Inverter Efficiency: 92%
MPPT Efficiency: 99%
Power Factor: 0.99
Output Wave Form: Pure Sine Wave
Weight: 5.5kg
Dimensions (W x H x D): 322x196x88 mm
Featured Refinements: MPPT
Bundle Listing: No

Category: 1000w | Comments Off

July 30

1000w Solinba Grid Tie Inverter Review Solar Setup

Category: 1000w | Comments Off

July 29

1000W Solar Power Grid Tie Inverter Pure Sine Wave DC 10.5-28V to AC110V or 220V

1000W on grid tie solar power inverter pure sine wave DC10.5-28V to 220VAC or 110VAC 1000W micro grid tie inverter. Can effectively prevent rainwater on the surface erosion, Built-in high-performance Maximum Power Point Tracking(MPPT)Function, Better able to track changes in the solar luminosity and control different output power, Effectively capture and collect sunlight. AC electric power transmission using the reverse transmission technology, Is one of our patented technology, The inverter output power can provide load priority use, Extra electricity to the grid, Efficient use of the inverter to the power emitted, Electricity transmission rate of up to 99%. Pure Sine Wave Output. High performance Maximum Power Point Tracking(MPPT). Power Automatically Locked(APL). High-Frequency High Conversion Rate. Input /output is fully isolated to protect the electrical safety. The Leading Patent Technology. Simplify maintenance (user serviceable). Installation and maintenance costs low. High Efficiency & Best Cost-Effectiveness. In order to achieve higher power, we can use this inverter in stack. For example: 4 pcs of 300W grid tie inverter used in stack can achieve 1200W. And the stacking number is unlimited. Recommend use solar panels. DC Maximum Input Power. Maximum output power factor. AC maximum output power. AC standard voltage range. Output short circuit protection. 099%(Indoor Type Design). The item “1000W Solar Power Grid Tie Inverter Pure Sine Wave DC 10.5-28V to AC110V or 220V” is in sale since Saturday, December 24, 2016. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “zcsolar2016″ and is located in , . This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.

Model: GTI-1000W
MPN: Does Not Apply
Brand: None

Category: 1000w | Comments Off

July 28

1000W On Grid Tie Inverter with Limiter for Solar DC 22-65V/45-90V AC110/220V

You may also like. 1000W On Grid Tie Inverter with Limiter for Solar Panels/Battery Power PV System. Why we produced the GRID TIE INVERTER WITH LIMITER? It is in response to the overwhelming clamor from our customers for a product that can control the amount of power that the grid tie inverters (GTI) can generate so that the amount of excess power produced by the solar panels are reduced to insignificant levels, if not eliminated — because in some countries, the producer pays for the excess power it gives to the distribution grid. This is because the electric power meters (the one provided by the electricity provider in the area) are not aware of the direction of power flow. In other words it only adds even if power is exported to the grid, thus, the consumers will be charged for power even if it is given to the grid, and this is the problem. This is the 2nd generation grid tie inverter with limiter. But in case customer install inverter far away from the main circuit breaker, we also enable the 2nd GTIL work with stand-alone limiter, we call this-external limiter. For sure, the inverter can work under normal Grid tie-no limit mode, just set on the nice LCD and save your setting. New upgraded firmware enable battery or solar limiter current and power model. User can set the maximum output power of inverter , this can make the inverter work at cooler contition as user want and extend the lifespan of the inverter. User can set kick in/off voltage of the inverter which can flexible using with battery bank depend on users mind and can prevent battery bank from over discharged. Gereantion 1000w Standard Solar Power Grid Tie Inverter. DC 22V-65V or 45V-90V (Optional). AC 110V 120V 220V 230V 240V (auto selected). With Battery Discharge Function / Voltage Adjustable. Wi-Fi port (optional). Power Limiter function built-in. SGPV and Grid Tie Inverter. SGPV – small solar grid tie inverter and solar panels. The inverter can obtain the solar energy from solar panel, and tie to the grid through its output cables with no extra equipment. The installation is very convenient and reliable. When the sun shines, the solar panels will produces DC voltage, and the grid tie inverter will change the DC voltage to AC voltage and puts out power to the home grid. The electric apparatus in the house will use power from the inverter first. The power meter will SLOW down. Advantage of the 2G grid tie inverter? The 2nd Generation grid tie inverter, new technical , Higher efficiency. Higher MPPT efficiency , Max 99%. Multiple intelligent protection to ensure safe use. Wide DC input voltage , suitable for all types solar panels. Easy to install and easy to operate. UL1741, IEEE1547, VDE4105 standards. Power Limiter function , Battery discharge function support. Pure sine wave form output , THD < 5%. Input DC Voltage Range. Peak power tracking voltage. AC Output Voltage Range. Dimensions (W x H x D). How to choose the inverter. The 22-65V model inverter will start up at 25V, after starting, the inverter can work in 22V-65V. Vmp 30v-60v Solar panels connected in Parallel suggested, for example : 4 pcs 200-260w (Vmp 31v solar panels in parallel). The 45-90V model inverter will start up at 49.5V, after starting, the inverter can work in 45V-90V. Vmp 50v-90v Solar panels in parallel suggested ; for Vmp 25V-45v solar panels , we suggest 2 panels in series , the total voltage will be 50V-90V , then connect 2 or more groups in parallel. For example : 2 pcs 200-260w (Vmp 31v) connected in series , 2 groups in parallel. About the limiter function. The Limiter function has been built-in. But, there is not limiter sensor/clamp with this product. The function is turned off. If customer want to use limiter function , please order limiter sensor/clamp in the future , or order a limiter model inverter. How to use the grid tie inverter? 1 unit inverter installation / more units inverters in parallel. The inverter AC output can be connected in the AC plug of grid in the house. LCD display and operation. Bat or solar limited current mode. This function is usable while using with battery. The setted voltage will be the cut off voltage, this means while battery discharged to the setted voltage point or below setted point, inverter will auto disconnect from the battery and stop operating. This can prevent the battery from over discharged. The setted current means inverter will discharge the battery at this current level. MPPT function of the inverter will auto invalid when working under this setting. Set is 0.1V/step. Set is 0.1V/Step. Note : Limiter model must use limiter sensor/clamp , there is not limiter sensor and clamp with this model inverter. If the Solar Panel is producing less power and the GTI cannot deliver all the power needed by the load, then powe will be supplemented by the Grid. Power Meters (Except smart meter) are not aware of the direction of Power flow. The user then pays for the power exported and delivered by the Grid. Optional Function : Wi-Fi port. We will message you if it happens. We understand the concerns and frustrations you might have, and will do our endeavor to resolve the issues. Please give us the opportunity to resolve any problem. The item "1000W On Grid Tie Inverter with Limiter for Solar DC 22-65V/45-90V AC110/220V" is in sale since Sunday, January 14, 2018. This item is in the category "Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters". The seller is "homegarden0722" and is located in Shenzhen. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.

Brand: SUN
MPN: SUN-1000G2-LCD
Country/Region of Manufacture: China
Input Voltage: 22v-60v or 45v-90v Optional
Output Voltage: 100V 110V 120V 220V 230V 240V auto
Output Frequency: 45-65Hz
Standby Power Consumption: <0.5w
Total Harmonic Distortion: <5%
Peak Inverter Efficiency: 92%
MPPT Efficiency: 99%
Power Factor: 0.99
Output Wave Form: Pure Sine Wave
Weight: 3.6kg
Dimensions (W x H x D): 322x196x88 mm
Featured Refinements: MPPT
Bundle Listing: No

Category: 1000w | Comments Off

January 2025
M	T	W	T	F	S	S
« Dec
		1	2	3	4	5
6	7	8	9	10	11	12
13	14	15	16	17	18	19
20	21	22	23	24	25	26
27	28	29	30	31