2000W Microinverter MPPT On Grid tie Inverter Micro Solar Converter Regulator Inverter With Limiter Sensor 45-90VDC for Solar Panel. Why do we produce the GRID TIE INVERTER WITH LIMITER? It is in response to the overwhelming clamor from our customers for a product that can control the amount of power that the grid tie inverters (GTI) can generate so that the amount of excess power produced by the solar panels are reduced to insignificant levels, if not eliminated — because in some countries, the producer pays for the excess power it gives to the distribution grid. This is because the electric power meters (the one provided by the electricity provider in the area) are not aware of the direction of power flow. In other words it only adds even if power is exported to the grid, thus, the consumers will be charged for power even if it is given to the grid, and this is the problem. This is the 2nd generation grid tie inverter with limiter. But in case customer install inverter far away from the main circuit breaker, we also enable the 2nd GTIL work with stand-alone limiter, we call this-external limiter. For sure, the inverter can work under normal Grid tie-no limit mode, just set on the nice LCD and save your setting. New upgraded firmware enables battery or solar limiter current and power model. User can set the maximum output power of the inverter, this can make the inverter work in cooler conditions as the user wants and extend the lifespan of the inverter. User can set kick in/off voltage of the inverter which can be flexible using a battery bank depending on the user’s mind and can prevent the battery bank from over discharged. Advantage of The Sunshine Grid Tie Power System. Advanced patented technology, MPPT efficiency is higher. High-quality imported components, more stable quality, lower failure rate. Significantly longer life, more than 10 years. Each inverter need to pass twice testing (20 hours) before leaving factory. Low cost and easy installation. Combination of SGPV does not interact. Improving the efficiency of the entire solar power system. The Grid Tie inverter converts DC power produced by Solar Panels to AC, connects to the grid and feeds all of the power available from the panels to the AC load. All excess power that is not needed by the load is then exported to the Grid. If the Grid fails, then the Grid Tie Inverter will turn off. When the Grid comes back on line. The Grid Tie Inverter will again supply power to the load and any excess power is exported to the Grid again. If the Solar Panel is producing less power and the GTI cannot deliver all the power needed by the load, then power will be supplemented by the Grid. Power Meters (Except smart meters) are not aware of the direction of Power flow. The user then pays for the power exported and delivered by the Grid. Using Grid Tie Inverter With Limiter Model. 2.1 The Grid Tie Inverter with Limiter delivers only the power needed. By the load and prevents delivering excess power hence avoids excess power in going back to the Grid. 2.2 The heart of the Grid Tie Inverter with Limiter is the Limiter Module (LM). The LM continuously sampled the power needed by the load through the current sensor connected after the Main Circuit Breaker. The LM then will process the signal. It then sends a signal to Grid Tie Inverter how much power to deliver to the load in real time. 2.3 The user, after installing and connecting the GTIL correctly, need not do anything and the unit will do its work automatically. Installation of GTIL With Internal Limiter. 3.1 This installation does not require an additional limiter module, Installation is much easier. Clamp the current sensor cable to the hot wire to measure the current, the internal limiter will auto detect the load power and control the inverter output power, excess power will be well controlled. 3.2 External protective devices including dc and ac SPD(Surge protection device), dc and ac breaker, etc is recommended to be installed in the system. Limiter Setting on the LCD of the inverter. The GTIL includes three working modes:Work as normal GTI without power limitation. Work under Internal limiter mode and Work under External limiter mode, Pls make your setting on the LCD and save it, details setting operation, pls read the GTI manual. 5 Battery Discharge Power Mode. 6 Limiter Module Specification. Clamp sensor- Max 100A. Clamp sensor signal- 5v AC max mA. DC signal Cable- 5v DC, max mA. Installing Sunshine Grid Tie Power System to Three Phases Utility Grid. When the Capacity of Grid Tie Power System is larger, install all the power system to one. Phase of the utility grid is not reasonable, maybe this will cause unbalance of the three. Phase of the utility grid. In this section, we will explain how to install Sunshine Power System to three phases utility. Grid separately in order to balance the fed power. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “gaweeshhimajale0″ and is located in this country: CN. This item can be shipped worldwide.

• Solar Regulator Type: With Wifi Modem Solar Regulator
• Microinverter Output Voltage: 230V(185V-265V)
• Solar Controller Input Voltage: 45-90VDC Solar Controller
• Current Rating: 201-250 A
• Maximum Input Power: 1801-2000 W
• Custom Bundle: Yes
• Wattage: 2000-2499 W
• Current Type: AC/DC
• System Configuration: Grid-Tie
• Material: Alloy
• Maximum Input Voltage: 81-90 V
• Power Source: Solar
• Type: Charger/Inverter
• Features: All Daylight Conditions, Automatic Voltage Detection, Corrosion Resistant, Daylight Operation, Fixed Guyed, Flexible, Foldable, Freestanding
• Color: Blue
• Recommended Environment: Indoor/Outdoor
• Protection Properties: Black Current Protection, Discharge Protection, Freeze Protection, Frost Protection, Lightning Protection, Low Voltage Protection, Open Circuit Protection, Overcharge Protection, Overcurrent Protection
• Power: 1801-2000 W
• Current Output: 30-39 A
• Brand: Unbranded
• Application: Agriculture/Farming, Aquaculture, Automotive, Back-up Power, Camping/Hiking, Commercial, Electronics, Home/Garden, Irrigation, Marine
• Charging Mode: PWM (Pulse Width Modulation)
• Resistance Properties: Abrasion Resistant, Acid Resistant, Antimicrobial Resistant, Chemical Resistant, Childproof, Child Resistant, Corrosion Resistant, Dustproof, Dust Resistant, Fade Resistant
• Voltage: 50-99 VDC