January
15
1200w grid tie power inverter DC 102v-158v / AC 220v+LCD, solar panel MPPT-W
1200W Grid Tie Power Inverter. DC 102V-158V to AC 220V. For Solar Panel MPPT. AC Output watt :0 Watt Max display power 15KW. Can display running power less than 1W. AC Output Volt : 0 volt (Max display volt 270V). AC Output Amp : 0 Amp (Max display amp 55A). Total Operation time :0-60000 hours. 59 minutes to 24 hours to 2500 days. Total operation time , electricity consumption and electricity cost can clear. Can set up power , the meter will alarm when reach reserve power. Can set up the cost. Refresh rate: one time 0.5 seconds. Sometimes, if you are using some heavy appliance like motor, engine, cause the voltage up down very fast, in this moment, big amp will come into the grid tie inverter, easy to cause the ac mos burned, so surge protector will cut down by itself to protect the grid tie inverter. You may have experience, when meet the big lightning, the power source of the home appliance may damage, same reason, will also cause the inverter damage, in this moment, the lightning protection can release thousand voltage to protect the inverter not damage. High speed AC fuse. Now we put ac fuse outside, each inverter will come our special ac fuse, this will be broken 1min/sec, to make sure high voltage spike come in! Power Jack always bring your life convenience, so let’s enjoy the green world! Idea for power jack. The inverter can be connected to any outlet at home, when this line run by the conventional electric network. The inverter IC will monitors the volume, frequency and phase of the home grid, then produce a pure sine wave that the frequency and phase will be match the grid’s, and the volume will be higher than the grid’s, then according to our current controlled PWM, to control the output power to the grid. The inverter will puts out power when the home grid is on. Why use power jack grid tie inverter? When you use solar panel through grid tie inverter, your home power meter will reduce the speed(if you are using other electric appliances), or your home power meter will backward(if you are not use any appliances). Difference of power jack grid tie inverter. Traditional grid tie inverter is the solar panel are connect in series, so if one solar panel did not work or bad efficiency, then the whole system will be effects, but power jack grid tie inverter, you can use every inverter in parallel, in this moment, each inverter has it’s own MPPT, can make every solar panel got the max power. Power jack grid tie inverter has green lights, when the charge fucntion is normal, then this green lights will turn on, but if there are not dc sources(like in the night, no sun shine or raining day), the red led light will turn on, the inverter will stop to work, in this moment, the inverter will close the door, the home grid power will not back to inverter. PSWGT-1200- 102 – 158-220. DC 102 -158 Volt(solar panel). No Load current Draw. Dimensions (L x W x H /cm). For DC 28V-48V inverter. 11.5V – 13.5V. Orange light on, fan keep working, but inverter stop working. Green flash faster and more powerful output. The inverter are designed for solar panels energy directly , no need battery and it is better not for wind turbine! Or we can send parts for repair. After 45 days -2 months. If you are dissatisfied for any reason, please donot be quick to leave negative/neutral feedback. The item “1200w grid tie power inverter DC 102v-158v / AC 220v+LCD, solar panel MPPT-W” is in sale since Wednesday, October 17, 2018. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “dr.powerjack” and is located in CA. This item can be shipped to United States.
- Brand: Power Jack
- MPN: 1.2K-GT-100V/220V+LCD-L