400W On-grid Solar Power Inverter with Pure Sine wave. DC input 50v-88v with AC220v grid tie inverter. This grid tie inverter cannot be used as off grid/stand alone solar system. The output need to be connected to the grid power. Can not supply power directly to the AC loads. Please check the plug and minus when connecting. Grid Tie Solar inverter – Vmp(of a solar panel) must be in the MPPT range to ensure the good output efficiency. Make sure that no overvoltage is used at the DC input. It will be damaged if wrong connecting. Technical assistance in Europe for these inverters. Four input voltage range, suitable for solar panels or battery. For solar panel PV input:50v-86v or 48v battery. Red Line: Connect DC positive, black Line: Connect DC negative. AC socket: Connection to the mains. The AC cord to the inverter 3 foot outlet, then the AC cord to home 3 pin AC outlet. Switch: Properly connected; turn on the switch, the inverter to work. Our inverters with a unique battery mode function, independent access battery or photovoltaic panels, can automatically recognize; when 26 42V inverter connected to 24V battery, AC power limit output of about 330W, 24V battery when the operating voltage is below 22V , the inverter will stop output, low voltage battery protection. Stackable connection The purpose is let small power inverter become high-power inverter. In order to achieve higher power use requirements, the use of this product can be stacked, such as: 5 grid inverters 500W of stack used is equal to 2500W, and the number of open stacks (No Quantitative Restrictions). The item “SOLAR/BATTERY INVERTER GRID TIE 400W 50-88V PV 48V BATTERY 230VAC 50HZ” is in sale since Wednesday, May 16, 2018. This item is in the category “Heimwerker\Erneuerbare Energie\Solarenergie\Photovoltaik-Zubehör\Wechselrichter”. The seller is “energy2000″ and is located in HONG KONG CHINA. This item can be shipped worldwide.

• Marke: ECO-POWER
• Herstellungsland und -region: China