110V 1000W grid tie power inverter for solar panel 10.5-30v DC US
Recommended using solar panels. Solar panel open circuit voltage range. Peak power tracking voltage. Maximum input operating current. Dimensions L× W × H. Reverse transfer, load priority. Red terminal: Connect DC positive, black terminal: Connect DC negative. 2 Input voltage range: 10.5V to 28V. Solar Panel: Recommend using the power more than 30W and the standard voltage of 17.5V PV panel. Recommend using multiple solar panels. Solar panel in series will result in high-input voltage which will exceed the working voltage range of the inverter. Wind turbine system: Rated voltage 24VDC, maximum voltage 28VDC. 2 Voltage range of the inverter whose output is 220V AC. 2 Voltage range of the inverter whose output is 110V AC. A:90140V (USA plug). B:180260V (Australian, British, European Union Plug OPTIONAL). 1Low-voltage protection (input DC voltage is less than 10.5VDC). 2Over-voltage protection (Input DC voltage is greater than 28.5VDC). 3Over-temperature protection when the chassis temperature is above 75. The temperature dropped about 2-10 minutes to restart automatically after cooling. 4Fault Protection (when 110VAC or 220VAC power outage or shutdown). 5Islanding protection: When the electric supply stop, the inverter automatically shut down output. 1Green LED flashing: The inverter is adjusting power output. MPPT is in working condition. 2Green LED long in time: The inverter is in working condition with the maximum output power. Please pay attention of the voltage when use the product. The voltage is from 10.528V, if is not these voltage the product may broken. Non-professionals do not disassemble. Only qualified personnel may repair this product. Please install inverter in the low humidity and well-ventilated place to avoid the inverter over-heating, and clear around the inflammable and explosive materials. When using this product, avoid children touching, playing, to avoid electric shock. Optimal length of the DC input line 8M or less, long cable will allow solar panels to the inverter DC voltage drop caused by wear and tear. Connected to a power outlet to provide AC. Connected solar panels, battery DC input DC power supply cable. One standard AC wire. The item “110V 1000W grid tie power inverter for solar panel 10.5-30v DC US” is in sale since Tuesday, January 9, 2018. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “kanbao377″ and is located in City of Industry. This item can be shipped to United States.
- Brand: Unbranded
- MPN: Does Not Apply
- Model: GTI-1000