1000W Grid Tie Pure Sine Wave MPPT Solar Power Inverter 110V AC Output US Stock

1000W Grid Tie Pure Sine Wave MPPT Solar Power Inverter 110V AC Output US Stock. DC10.8V30V or DC20V45V to AC110V Output. Please be noted, This grid tie inverter cannot be used as off grid/stand alone solar system. The output need to be connected to the grid power. Can not supply power directly to the AC loads. The Solar Panels which used with this Inverter, must be same specification. Otherwise the conversion rate will be very low. Grid tie inverter is a device which directly converts direct current into alternating current which. Sine wave, frequency and phase are same as power grid and then feed into utility grid. It is a key. Device of power generation systems such as PV power generation system. Smart Microinverter specially optimized design to work with modularization of DC. Power supplies which includes the mainstream solar modules, 18V (36 cells), 24V (60 cells) and. 36V (72 cells) monocrystal and/or Polycrystalline solar panels. Microinverters are stabilization, reliable and high conversion efficiency items. It is best choice for PV. Smart Microinverter can be easily placed and attached to the rack underneath of PV module. Need spaces for independent installation and low voltage DC wire connects from the PV module to. Smart Microinverter can eliminate the risk of high DC voltage. Philosophy for Smart Microinverterl insures the productiveness of the whole system and will not. Affect by a single point of failure. Each Smart Microinverter is individually connected to one PV. Module in the array. Each PV module has the individual Maximum Peak Power Point Tracker. Control and insures the maximum power is exported to the utility grid regardless of the. Performance of the other PV modules in the array. When PV modules in the array under non-ideal. Conditions in practical applications such as PV modules are affected by shading, soiling. Orientation, or mismatch, Smart Microinverter insures top performance for maximizes energy. Production from the whole PV system and gets return on investment in less time. Advantages of Smart Microinverter. Unique circuit design, choice of import industrial electronic components, higher efficiency, more. Creative MPPT technology, efficiency more than 99%, faster and more sensitive reaction, more. Parallel type design for DC input and modularization design for inverter, small volume, distributed. Installation, easy for system configuration, flexible for combination, strong expansibility of system. Adopting high-frequency isolation transformer type, high efficiency, and high security. Perfect electrical protection function. Aluminum alloy housing, not rust, heat-resisting and cold-resistant as well as anti-corrosion. Getting electronic circuit design, appearance design and other core technology patents. 230V(180-260V) or 110V(90V-140V). What’s In Box. 1 x 1000W Grid Tie Inverter. 1 x User’s Manaul. 1 x AC Cord (US/AU/EU/UK). Any question will be replied within 24 hours except the weekend and statuary holiday in Chinese Beijing Time. My goal is to make sure you are happy and having the pleasant shopping with us. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “brcu8037″ and is located in this country: US. This item can be shipped to United States.

Input Voltage: 20-45V
Model: GT1000
Current Type: AC
System Configuration: Grid-Tie
Type: Charger/Inverter
Protection Properties: Black Current Protection, Discharge Protection, Low Voltage Protection, Open Circuit Protection, Overcharge Protection, Overcurrent Protection
Power: 1000W
Brand: KRXNY
Application: Home/Garden
Charging Mode: MPPT (Maximum Power Point Tracking)
Solar panel: 18V(36cells),24/30V(60cells),36V(72cells)
Wave Form: Pure Sine Wave
Frequency: 60HZ

Category: 1000w | Comments Off

January 30

New (old stock) AURORA PVI 6000-OUTD-US-A Single/Split Phase Grid Tied Inverter

UNIT NEW, BOX IS WEATHERED. This listing is for a SUNPOWER BRANDED solar string inverter PVI-6000-OUTD-US-A grid-tied, 6,000 watt, 600Vdc, 240-208-277Vac, transformer-less, dual-channel MPPT, integrated DC safety disconnect switch, arc-fault protection. This ABB solar inverter delivers reliable, high performance PV energy harvest due to precise MPPT shade reducing algorithm along with a California CEC weighted efficiency of 96%. The ABB inverter is well suited for USA residential and commercial PV system installations. PARTS LIST – Product Features. 96.5% CEC efficiency for improved energy harvesting. Dual-channel MPPT for real time power tracking. Wide MPPT input voltage range enables high flexibility in solar array string design. Extra quiet high frequency transformer-less inverter architecture. NEMA4X enclosure and light weight design enable inverter mounting flexibility. Integrated DC disconnect safety switch and wiring box saves installation time and cost. Meets latest Arc-fault protection standards. Flexible data monitoring options to view inverter performance. Solar Inverter Model: ABB PVI-6000-OUTD-US-A, PVI-6000-OUTD-US, PVI-6000-OUTD-US. Maximum STC Rated PV power: 8,000 watts DC. Maximum Efficiency: 97.1%. Maximum Input Voltage: 600 Vdc. Minimum Input Voltage: 120 Vdc. Minimum Start Voltage: 200 Vdc. MPPT Voltage Range (Max): 530.0 Volts. MPPT Voltage Range (Min): 140.0 Volts. Maximum DC Input Current: 36 Amps. Maximum usable current per channel: 22A. Nominal AC Power Output: 6,000 watts. CEC Weighted Efficiency: 96.5%. AC Output Voltage: 208V, 240V, 277Vac. Nominal AC Output Voltage: 240.0 Volts. Nominal Output Frequency: 60.0. Enclosure Type: NEMA 4X, outdoor rated. Dimensions: 41.4 x 12.8 x 8.6 inches. Weight: 59.5 lbs. Cooling Method: natural convection. Operating Temperature Range: -40F to +140F. Country of Origin: USA. Certifications: UL1741, IEE154, IEE1547.1, CSA-C22.2N. 107.1-01, UL1998 UL 1699B, FCC Part 15 Class B. The item “New (old stock) AURORA PVI 6000-OUTD-US-A Single/Split Phase Grid Tied Inverter” is in sale since Tuesday, November 17, 2020. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “signaturesolar” and is located in Brashear, Texas. This item can be shipped to United States.

Model: PVI-6000-OUTD-US-A
Current Type: AC
System Configuration: Grid-Tie
Type: Charger/Inverter
Features: Daylight Operation
Power: 6000W
Brand: SunPower
Application: Agriculture/Farming
Resistance Properties: Child Resistant

Category: stock | Comments Off

December 2

1000W Grid Tie power inverter DC22V-56V / AC110V, solar panel, mppt, USA stock

1000W on Grid Tie Power Inverter. Pure sine wave micro grid tie inverter. For 24v solar system, DC 22V-56V to AC 90V-130V. The grid tie power inverter can obtain the solar energy from solar panels, and can tie to the grid through its output cable without extra equipment. The installation is very convenient and reliable. This smart grid tie inverter can connect with mono silicon, polygon silicon, non-crystal film that can transform solar energy to home grid. The power of grid tie solar panels, it can be standardization according to the actual using. The inverter can be connected to any home AC outlet, when this line runs by the conventional electric network. This grid tie inverter monitors the volume, frequency and phase of the home grid, then produce a pure sine wave that the frequency and phase are as same as the grids, and the volume is a bit higher than the grids, then according to the current controlled PWM, to control the output power to the grid. The inverter just outputs power when the home grid is on. In the day time, solar panels will produces DC voltage, and thus inverter will change the DC voltage to AC voltage and outputs power to home grid system. During the night, inverter will be standby mode and led light will be red, and inverter will back to work in the day time when inverter detects the input voltage is up to working voltage. When the total power of electric apparatus that are using in the house is larger than the output power of the inverters, these power from the inverters will be consumed in the house, this will slow down the power meter, otherwise, the difference of the output power of the inverter between the total used power of the apparatus will go out from the house to the out grid. There are many advantages of grid tie inverter compare with the traditional grid tie system. Low cost and easy installation this inverter can make full use of all types of buildings/houses surface that face to the sun in the city as well as fast and easy installation of solar models and grid tie inverter. Its very low maintenance costs. Free combination this inverter can be used as a separate grid tie system and can be setup as a large solar array with many of them (stackable). The quantity of the inverter in the array is just according to your demands. If you are planning to install a grid tie PV system, in a general way, the solar array and inverter need to be carefully matched to ensure that the inverters on load voltage and power limits are not exceeded. When you want to increase more solar panels, and if the total power of the solar panels exceeds the allocation grid tie inverter, it is necessary to add more grid tie inverters. Combination of grid tie inverters will not interact The traditional solar grid tie system, they offer units ranging in high power output and these units are modular so you can have multiple units operating in parallel for large solar arrays. Although, the traditional grid inverter has MPPT feature (Maximum Power Point tracking), but the maximum power point is according to the entire series in terms of solar panels array, if the performance of a piece of solar panels in the system, for some reason, like dust, shadow… The performance of the entire solar power system will decrease. This inverter has no such disadvantage. If the performance of a piece of solar panels in the system degrades, this just effects this piece itself, will not affect others in the system. Improving the efficiency of the entire solar power system in traditional grid tie system, the solar panels are connected in series, so the MPPT of the inverter is according to the total panels in series, not to every panel, but there is difference between every panel, so not every panel is working at the maximum power, this will reduce the total power of these panel in series. But this inverter has no such disadvantage. Because every inverter has MPPT function, so every panel is working at the maximum power, this will increase the efficiency of the entire system. Low power consumption most of the parts in the grid tie inverter are digital ICs and low power MCU, so the power consumption of it is low, though the quantity of grid tie inverters is increased, but this will not increase the power consumption of the entire system. The individual system of the inverter is shown in Figure 1. Installing the solar panel with DC input terminals of the grid tie inverter, and inverter AC side is power cord with plug, just plug into home AC grid socket. Connect solar panels with inverters DC terminals, inverter AC side connect to home AC grid source, then turn on inverter to start work. Please connect with correct home Ac source, if inverter is AC 180v-260v, then must connect with home AC 280v-260v outlets, inverter will not work for wrong voltage. The LED indicator will start to light when the grid and DC supply is detected. This indicates the inverter is operating under normal condition. The rate of the cycling is according to how much power is being input from the solar panels. The more input power, the led light will flash fast. If there is no Ac grid detected, the red LED will be on, the inverter will not output, this is called Island protection to avoid damage of PCB boards. Note: this inverter is designed for solar panel, please do not use with wind turbine, thanks. Normal Ac output power. Maximum AC output power. DC Input Voltage range. DC 22V-56V (solar panel). AC Output Voltage range. Total harmonic distortion(THD). MPPT function / Stackable. Dimensions (L x W x H /cm). 33.519.513.5cm. International buyers Please Note. The item “1000W Grid Tie power inverter DC22V-56V / AC110V, solar panel, mppt, USA stock” is in sale since Wednesday, July 24, 2019. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “solarleader2016″ and is located in warehouse. This item can be shipped to United States.

Model: 1KW-GT-22-56-110
Country/Region of Manufacture: China
Wattage: 1000W
System Configuration: Grid-Tie
Power Source: Solar
Voltage Input: 22V-56V
MPN: do not apply
Recommended Environment: Indoor/Outdoor
Voltage Output: 110V
Brand: SOLINBA

Category: 1000w | Comments Off

November 10

1000W Grid Tie power inverter DC46V-112V / AC110V, solar panel, mppt, USA stock

1000W on Grid Tie Power Inverter. Pure sine wave micro grid tie inverter. For 48V-60V solar system, DC 46V-112V to AC 90V-130V. Important note: on grid tie inverter, it need to plug into your home grid, CAN’T power your device directly. For 48V-60V solar system, the best working voltage(MPPT) is about 80V-96V. Multi-protection function: Over Current Protection/Over Temperature Protection/Reverse Polarity Protection/Island Protection. Features: Stackable/MPPT-Maximum Power Point Tracking/Automatic Sensing Function Solar Luminosity and restart automatic every morning. Safety: DC and AC all have fuse to protect the people + power switch +we do the speical for the aluminum shell, it is insulation. Cooling method: fan-cooled w/aluminum shell, more better cooling function, smart and light, easy to carry and handle. The grid tie power inverter can obtain the solar energy from solar panels, and can tie to the grid through its output cable without extra equipment. The installation is very convenient and reliable. This smart grid tie inverter can connect with mono silicon, polygon silicon, non-crystal film that can transform solar energy to home grid. The power of grid tie solar panels, it can be standardization according to the actual using. The inverter can be connected to any home AC outlet, when this line runs by the conventional electric network. This grid tie inverter monitors the volume, frequency and phase of the home grid, then produce a pure sine wave that the frequency and phase are as same as the grids, and the volume is a bit higher than the grids, then according to the current controlled PWM, to control the output power to the grid. The inverter just outputs power when the home grid is on. In the day time, solar panels will produces DC voltage, and thus inverter will change the DC voltage to AC voltage and outputs power to home grid system. During the night, inverter will be standby mode and led light will be red, and inverter will back to work in the day time when inverter detects the input voltage is up to working voltage. When the total power of electric apparatus that are using in the house is larger than the output power of the inverters, these power from the inverters will be consumed in the house, this will slow down the power meter, otherwise, the difference of the output power of the inverter between the total used power of the apparatus will go out from the house to the out grid. There are many advantages of grid tie inverter compare with the traditional grid tie system. Low cost and easy installation this inverter can make full use of all types of buildings/houses surface that face to the sun in the city as well as fast and easy installation of solar models and grid tie inverter. Its very low maintenance costs. Free combination this inverter can be used as a separate grid tie system and can be setup as a large solar array with many of them (stackable). The quantity of the inverter in the array is just according to your demands. If you are planning to install a grid tie PV system, in a general way, the solar array and inverter need to be carefully matched to ensure that the inverters on load voltage and power limits are not exceeded. When you want to increase more solar panels, and if the total power of the solar panels exceeds the allocation grid tie inverter, it is necessary to add more grid tie inverters. Combination of grid tie inverters will not interact The traditional solar grid tie system, they offer units ranging in high power output and these units are modular so you can have multiple units operating in parallel for large solar arrays. Although, the traditional grid inverter has MPPT feature (Maximum Power Point tracking), but the maximum power point is according to the entire series in terms of solar panels array, if the performance of a piece of solar panels in the system, for some reason, like dust, shadow… The performance of the entire solar power system will decrease. This inverter has no such disadvantage. If the performance of a piece of solar panels in the system degrades, this just effects this piece itself, will not affect others in the system. Improving the efficiency of the entire solar power system in traditional grid tie system, the solar panels are connected in series, so the MPPT of the inverter is according to the total panels in series, not to every panel, but there is difference between every panel, so not every panel is working at the maximum power, this will reduce the total power of these panel in series. But this inverter has no such disadvantage. Because every inverter has MPPT function, so every panel is working at the maximum power, this will increase the efficiency of the entire system. Low power consumption most of the parts in the grid tie inverter are digital ICs and low power MCU, so the power consumption of it is low, though the quantity of grid tie inverters is increased, but this will not increase the power consumption of the entire system. The individual system of the inverter is shown in Figure 1. Installing the solar panel with DC input terminals of the grid tie inverter, and inverter AC side is power cord with plug, just plug into home AC grid socket. Connect solar panels with inverters DC terminals, inverter AC side connect to home AC grid source, then turn on inverter to start work. Please connect with correct home Ac source, if inverter is AC 180v-260v, then must connect with home AC 280v-260v outlets, inverter will not work for wrong voltage. The LED indicator will start to light when the grid and DC supply is detected. This indicates the inverter is operating under normal condition. The rate of the cycling is according to how much power is being input from the solar panels. The more input power, the led light will flash fast. If there is no Ac grid detected, the red LED will be on, the inverter will not output, this is called Island protection to avoid damage of PCB boards. Note: this inverter is designed for solar panel, please do not use with wind turbine, thanks. Normal Ac output power. Maximum AC output power. DC Input Voltage range. DC 46V-112V (solar panel). AC Output Voltage range. Total harmonic distortion(THD). MPPT function / Stackable. Dimensions (L x W x H /cm). 33.519.513.5cm. International buyers Please Note. The item “1000W Grid Tie power inverter DC46V-112V / AC110V, solar panel, mppt, USA stock” is in sale since Monday, September 2, 2019. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “solarleader2016″ and is located in dong guan. This item can be shipped to United States.

Model: 1KW-GT-46-112-110
Country/Region of Manufacture: China
Wattage: 1000W
System Configuration: Grid-Tie
Power Source: Solar
Voltage Input: 46V-112V
MPN: do not apply
Recommended Environment: Indoor/Outdoor
Voltage Output: 110V
Brand: SOLINBA

Category: 1000w | Comments Off

July 8

USA Stock. LV2424 Hybrid 2 x 2400W 24V 120V Solar Inverter Split Phase bundle

NOTE : This listing is for TWO INVERTERS which are required for split phase operation, as well as a parallel kit for each inverter. (One inverter per phase). USA Stock is import duty free! Now supports Wifi remote monitoring on the www. Manuals can be found here. This is a listing for ONE Hybrid LV2424 3kVA 2400W 110/120V inverter , 80A MPPT solar charger, and built in 60A Utility charger to keep your batteries charged if the Sun is inadequate, or your batteries are just running low in the middle of the night. Runs on a 24VDC Battery bank. LiFePO4 + Lithium Ion support. Supports grid tie and off grid functionality not UL Listed. Per Inverter Specs (this listing is for 2 pcs). 1 2400 W Pure Sine wave output expandable up to 9 units (21.6 kW). 2 2kW MPPT Solar Charge controller. 3 60 A Utility Battery Charger In case your battery level falls below your setpoint. 4 UPS function, wire it to the Utility power, if battery power is too low, the system automatically switches the load to Utility power. 5 Single 120V 60Hz , Split phase (120V – 0 – 120V) and 3 phase capable (requires parralel board for each unit). 5.5 Grid Tie function (Anti Islanding, – Note: This inverter is NOT UL listed in the USA, for DIY enthusiast only, it is CE listed for European markets) – Send your excess power to slow your existing meter, once batteries are fully charged. If you need two units for split phase operation, see our split phase listing. This unit excludes the parallel module, whereas the other bundled listings includes it. This unit will operate just fine on its own for single phase 110V/120V, and is upgradable / stackable for future single / split phase or three phase operation. An excellent start to grow your installation, or if you just simply need one more inverter to add to your existing array. Stackable up to 9 units in any configuration up to 2.4kW x 9 = 21.6kW. 120V USA Models Comparison Sheet. After 1 year, offer spare part modules at reasonable pricing. Output Power in Watts (Pure Sine wave). Output Power in VA. Output Surge Capacity for 5 seconds. Output Voltage AC – Single Inverter Configuration. Output Voltage AC – Multiple Inverter Configuration. Single, 2 and 3 Phase. 1, Split 120/240V, 2 & 3 Ph. 1, Split, 2 & 3 Ph. Supports 50 and 60 Hz. Parallelable Daisy chain multiple units. Yes, 6 units-14.4kW max. Yes, 9 Units21.6 kW max. Yes- 3 Units 15kW max. Split Phase support (L1-120V , N, L2-120V) 240V / L1 & L2, 180 Deg. Yes, 2 or more units. Yes In Same unit. Two Phase Output 120V and 208V 120 Deg. Yes, 1 or more units. Three Phase Output 120V and 208V 120 Deg. Yes, 3 or more units. Optional Grid Feedback excess energy (Anti Islanding). Generator Dry Contact Relay Start / Stop / Alarm / User Def. MPPT Solar Input Voltage Range. MPPT Solar Input Max Voc(open circuit volts). MPPT Max Watts Solar Input. 8kW (4000W x 2). MPPT Max battery Charging Current. 160A (80A x 2). Min Battery Voltage for Solar Charging. Utility Max Charging Current. Utility + Solar max Current. Utility Bypass Max Current (Utility switched to Load). Communication Port, USB, RS232. Software Support (MAC, Windows 7-10, Linux). Wifi Communication Module compatible. Operating Temp F / C. Operating Humidity (Non Condensing). Net Weight lb / Kg. Dimensions in / cm. 3 Step Charging Algorithm (Bulk / Absorb/ Float). Lithium & LiFePO4 support (USER Mode). USER definable battery parameters. Absolute Min Cutoff Voltage. Min Cold Start Voltage. Max Charging Amps Solar + Utility. Absolute Minimum Batt Ah capacity. Recommended Min Batt Ah capacity. Energy Saving (Utility provides power as last priority). SOL – Solar 1st + Battery Assist 2nd , Utility Assist 3rd. UPS Mode (Solar and Battery only if no Utility). Utl – Utility 1st, Solar 2nd + Battery 3rd. Hybrid Energy & UPS mode Programmable battery Level. SbU Solar 1st + Battery 2nd /Level, Utility 3rd. CSO Solar 1st, Utility 2nd. Cut Utility 1st, Solar 2nd. SNU Solar + Utility together. Approximate battery Back-up Time (minutes). Load 500-VA (400W) with 100Ah Battery. Load 1000-VA (800W) with 100Ah Battery. Load 2000-VA (1600W) with 100Ah Battery. Load 3000-VA (2400W) with 100Ah Battery. Load 500-VA (400W) with 200Ah Battery. Load 1000-VA (800W) with 200Ah Battery. Load 2000-VA (1600W) with 200Ah Battery. Load 3000-VA (2400W) with 200Ah Battery. Load 500-VA (400W) with 400Ah Battery. Load 1000-VA (800W) with 400Ah Battery. Load 2000-VA (1600W) with 400Ah Battery. Load 3000-VA (2400W) with 400Ah Battery. The item “USA Stock. LV2424 Hybrid 2 x 2400W 24V 120V Solar Inverter Split Phase bundle” is in sale since Monday, June 29, 2020. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “usa-mpp-solar” and is located in Mount Pleasant, Utah. This item can be shipped to North, South, or Latin America.

Brand: MPP SOLAR
Model: Hybrid LV 2424*2
Type: MPPT Charge Controller
System Configuration: Hybrid
Power: Greater Than 2000 W
Voltage: 24 V to 110V/220V split phase
Application: Recreational Vehicle (RV)
Charging Mode: MPPT (Maximum Power Point Tracking)
Current Output: 20-29 A
MPN: Hybrid LV 2424*2
Features: LCD Display
Current Rating: 21-30 A

Category: stock | Comments Off

November 14

Canadian Stock Ac120v Solar Inverter 2000va 60a Mppt Charger 48vdc Battery Bank

Solar Inverter + Charger Specifications. 95-140 VAC (For Personal Computers). 65-140 VAC (For Home Appliances). 50 Hz/60 Hz (Auto sensing). 10 ms (For Personal Computers). 20 ms (For Home Appliances). Solar Charger & AC Charger. D x W x H. 140 x 295 x 479/. 5.5 x 11.6 x 18.8. 5% to 95% Relative Humidity (Non-condensing). Pure sine wave inverter. Built-in MPPT solar charge controller & Grid Charge. Selectable input voltage range for home appliances & sensitive devices (computers). Selectable charging current based on applications. Configurable AC/Solar input priority keypad. Compatible to mains voltage or generator power. Auto restart while AC is recovering. Smart battery charger design for optimized battery performance. Generator start contact, inverter send signal to generator for startup if batteries getting low in absence of sunlight. The item “CANADIAN STOCK AC120V SOLAR INVERTER 2000VA 60A MPPT CHARGER 48VDC BATTERY BANK” is in sale since Tuesday, May 28, 2019. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “in_2198″ and is located in Winnipeg, MB. This item can be shipped to North, South, or Latin America.

Type: Grid Tie Inverter
Voltage: 48 V
Model: SEMP-2KP-48 120VAC 60Hz
MPN: SEMP-2KP-48 120VAC 60Hz
Brand: SOLAR EPC CANADA
Package Weight: 13.15kg (29lb.)
Feature: SOLAR INVERTER CHARGER AC120V

Category: canadian | Comments Off

November 9

1000W Grid Tie power inverter DC22V-56V / AC110V, solar panel, mppt, USA stock

1000W on Grid Tie Power Inverter. Pure sine wave micro grid tie inverter. For 24v solar system, DC 22V-56V to AC 90V-130V. The grid tie power inverter can obtain the solar energy from solar panels, and can tie to the grid through its output cable without extra equipment. The installation is very convenient and reliable. This smart grid tie inverter can connect with mono silicon, polygon silicon, non-crystal film that can transform solar energy to home grid. The power of grid tie solar panels, it can be standardization according to the actual using. The inverter can be connected to any home AC outlet, when this line runs by the conventional electric network. This grid tie inverter monitors the volume, frequency and phase of the home grid, then produce a pure sine wave that the frequency and phase are as same as the grids, and the volume is a bit higher than the grids, then according to the current controlled PWM, to control the output power to the grid. The inverter just outputs power when the home grid is on. In the day time, solar panels will produces DC voltage, and thus inverter will change the DC voltage to AC voltage and outputs power to home grid system. During the night, inverter will be standby mode and led light will be red, and inverter will back to work in the day time when inverter detects the input voltage is up to working voltage. When the total power of electric apparatus that are using in the house is larger than the output power of the inverters, these power from the inverters will be consumed in the house, this will slow down the power meter, otherwise, the difference of the output power of the inverter between the total used power of the apparatus will go out from the house to the out grid. There are many advantages of grid tie inverter compare with the traditional grid tie system. Low cost and easy installation this inverter can make full use of all types of buildings/houses surface that face to the sun in the city as well as fast and easy installation of solar models and grid tie inverter. Its very low maintenance costs. Free combination this inverter can be used as a separate grid tie system and can be setup as a large solar array with many of them (stackable). The quantity of the inverter in the array is just according to your demands. If you are planning to install a grid tie PV system, in a general way, the solar array and inverter need to be carefully matched to ensure that the inverters on load voltage and power limits are not exceeded. When you want to increase more solar panels, and if the total power of the solar panels exceeds the allocation grid tie inverter, it is necessary to add more grid tie inverters. Combination of grid tie inverters will not interact The traditional solar grid tie system, they offer units ranging in high power output and these units are modular so you can have multiple units operating in parallel for large solar arrays. Although, the traditional grid inverter has MPPT feature (Maximum Power Point tracking), but the maximum power point is according to the entire series in terms of solar panels array, if the performance of a piece of solar panels in the system, for some reason, like dust, shadow… The performance of the entire solar power system will decrease. This inverter has no such disadvantage. If the performance of a piece of solar panels in the system degrades, this just effects this piece itself, will not affect others in the system. Improving the efficiency of the entire solar power system in traditional grid tie system, the solar panels are connected in series, so the MPPT of the inverter is according to the total panels in series, not to every panel, but there is difference between every panel, so not every panel is working at the maximum power, this will reduce the total power of these panel in series. But this inverter has no such disadvantage. Because every inverter has MPPT function, so every panel is working at the maximum power, this will increase the efficiency of the entire system. Low power consumption most of the parts in the grid tie inverter are digital ICs and low power MCU, so the power consumption of it is low, though the quantity of grid tie inverters is increased, but this will not increase the power consumption of the entire system. The individual system of the inverter is shown in Figure 1. Installing the solar panel with DC input terminals of the grid tie inverter, and inverter AC side is power cord with plug, just plug into home AC grid socket. Connect solar panels with inverters DC terminals, inverter AC side connect to home AC grid source, then turn on inverter to start work. Please connect with correct home Ac source, if inverter is AC 180v-260v, then must connect with home AC 280v-260v outlets, inverter will not work for wrong voltage. The LED indicator will start to light when the grid and DC supply is detected. This indicates the inverter is operating under normal condition. The rate of the cycling is according to how much power is being input from the solar panels. The more input power, the led light will flash fast. If there is no Ac grid detected, the red LED will be on, the inverter will not output, this is called Island protection to avoid damage of PCB boards. Note: this inverter is designed for solar panel, please do not use with wind turbine, thanks. Normal Ac output power. Maximum AC output power. DC Input Voltage range. DC 22V-56V (solar panel). AC Output Voltage range. Total harmonic distortion(THD). MPPT function / Stackable. Dimensions (L x W x H /cm). 33.519.513.5cm. The item “1000W Grid Tie power inverter DC22V-56V / AC110V, solar panel, mppt, USA stock” is in sale since Friday, July 5, 2019. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Solar Power Supplies\Solar Panels & Kits”. The seller is “solarleader.j” and is located in Dallas, Texas. This item can be shipped to United States.

Type: Solar Panel
Model: 1000w-GT-22-110
Country/Region of Manufacture: China
Wattage: 1000W
MPN: Does Not Apply
Brand: solinba

Category: 1000w | Comments Off

September 17

Canadian Stock Ac120v Solar Inverter 2000va 60a Mppt Charger 24vdc Battery Input

Solar Inverter + Charger Specifications. 95-140 VAC (For Personal Computers). 65-140 VAC (For Home Appliances). 50 Hz/60 Hz (Auto sensing). 10 ms (For Personal Computers). 20 ms (For Home Appliances). Solar Charger & AC Charger. D x W x H. 140 x 295 x 479/. 5.5 x 11.6 x 18.8. 5% to 95% Relative Humidity (Non-condensing). Pure sine wave inverter. Built-in MPPT solar charge controller & Grid Charge. Selectable input voltage range for home appliances & sensitive devices (computers). Selectable charging current based on applications. Configurable AC/Solar input priority keypad. Compatible to mains voltage or generator power. Auto restart while AC is recovering. Smart battery charger design for optimized battery performance. Generator start contact, inverter send signal to generator for startup if batteries getting low in absence of sunlight. The item “CANADIAN STOCK AC120V SOLAR INVERTER 2000VA 60A MPPT CHARGER 24VDC BATTERY INPUT” is in sale since Tuesday, May 28, 2019. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “in_2198″ and is located in Winnipeg, MB. This item can be shipped to Canada, United States.

Package Weight: 12.7kg (28lb.)
Feature: SOLAR INVERTER CHARGER 120VAC
Model: SEMP-2KP-24 120VAC 60Hz
Type: Grid Tie Inverter
MPN: SEMP-2KP-24 120VAC 60Hz
Brand: SOLAR EPC CANADA
Voltage: 24 V

Category: canadian | Comments Off

September 4

Canadian Stock Ac120v Solar Inverter 1000va 40a Mppt Charger 12vdc Battery Input

Solar Inverter + Charger Specifications. 95-140 VAC (For Personal Computers). 65-140 VAC (For Home Appliances). 50 Hz/60 Hz (Auto sensing). 10 ms (For Personal Computers). 20 ms (For Home Appliances). Solar Charger & AC Charger. D x W x H. 95 x 240 x 316/. 3.7 x 9.5 x 12.4. 5% to 95% Relative Humidity (Non-condensing). Pure sine wave inverter. Built-in MPPT solar charge controller & Grid Charge. Selectable input voltage range for home appliances & sensitive devices (computers). Selectable charging current based on applications. Configurable AC/Solar input priority keypad. Compatible to mains voltage or generator power. Auto restart while AC is recovering. Smart battery charger design for optimized battery performance. Generator start contact, inverter send signal to generator for startup if batteries getting low in absence of sunlight. The item “CANADIAN STOCK AC120V SOLAR INVERTER 1000VA 40A MPPT CHARGER 12VDC BATTERY INPUT” is in sale since Tuesday, May 28, 2019. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “in_2198″ and is located in Winnipeg, MB. This item can be shipped to Canada, United States.

Package Weight: 8kg (17.63lb.)
Feature: SOLAR INVERTER CHARGER 120VAC
Model: SEMP-1KP-12 120VAC 60Hz
Type: Grid Tie Inverter
MPN: SEMP-1KP-12 120VAC 60Hz
Brand: SOLAR EPC CANADA
Voltage: 12 V

Category: canadian | Comments Off

August 7

SMA Sunny Boy 7000-us-12 Grid Tie Inverter New open box, old stock

Ziggy’s Zoo – Where everyone is treated like family. SMA Sunny Boy 7000-us-12 Grid Tie Inverter – New open box, old stock. We are currently clearing out the inventory of a solar installer. Check our inventory for other great deals. Ziggys Zoo is a small family owned business. We focus on providing you with high quality items at reasonable prices. Check out our Zoo (our store) for a wide variety of items. _gsrx_vers_841 GS 7.0.16 (841). The item “SMA Sunny Boy 7000-us-12 Grid Tie Inverter New open box, old stock” is in sale since Sunday, August 4, 2019. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “ziggyszoo” and is located in Clinton, Connecticut. This item can be shipped to United States.

Type: Grid Tie Inverter
Model: Sunny boy 7000-US-12
Modified Item: No
Country/Region of Manufacture: Unknown
Custom Bundle: No
System Configuration: Grid-Tie
Non-Domestic Product: No
MPN: Does Not Apply
Brand: SMA

Category: sunny | Comments Off

November 2024
M	T	W	T	F	S	S
« Oct
				1	2	3
4	5	6	7	8	9	10
11	12	13	14	15	16	17
18	19	20	21	22	23	24
25	26	27	28	29	30