Solar Micro Inverter 1200W MPPT Grid Tie Pure Sine Wave DC to AC LCD Waterproof

Package Included 1 Micro Inverter 1 Power Cord 1 English Manual Other Accessories for Installation. Solar Micro Inverter 1200W MPPT Grid Tie Pure Sine Wave DC to AC LCD Waterproof. Please install the inverter correctly according to the instructions. If you have any questions, please contact the relevant personnel. Please don’t dismantle the machine. Only qualified maintenance personnel can repair the inverter. Please install the inverter in a place with low humidity and good ventilation to avoid overheating the inverter and remove the surrounding inflammable and explosives. When using this inverter, please take good care of your children to prevent them from touching and playing to avoid electric shock. Please note that our products are grid-connected, the AC output port has to be connected to the home grid in order to achieve grid-connected power generation. When the input load is with solar panels, it is important that the VOC voltage is between 30-48V. We recommend that the solar panel is configured for 20% more power than the power of the product. For example, if the product is 600W, the total power of the solar panels should be between 700-750W. When the input load is a battery, we recommend a battery voltage of 36V, which can be connected in series with 3 12V batteries. Please note that the positive and negative polarity should not be reversed when connecting the product. The recommended battery current is 36V/10mah for 300W, 36V/20mah for 600W, and 36V/40-45mah for 1200W. The input and output voltage of the configuration is within the normal operating voltage range of the product in order for the product to work properly and achieve grid-connected power generation. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement. Please make sure you do not mind before you order. An inverter can efficiently turn the direct current generated by solar panels into the alternating current used by household appliances. This micro inverter makes it easier. Made of fine aluminum alloy, this IP65 waterproof inverter has a wide range of functions, good safety, convenient installation, and high-cost performance. We believe this inverter will not disappoint you. The inverter is made of aluminum alloy, which is durable, corrosion-resistant, and not easy to rust. You can use it for a long time without frequent replacement, and your cost can be saved. The inverter has built-in high-precision maximum power point tracking, which can optimize the power collection from the solar panel, accurately capture and lock the maximum output power point, and greatly increase power generation to more than 25%. In addition, the efficient power reverse transmission technology can transmit the power that can not be used up to the grid in the reverse direction to other places for use, and the power transmission rate can reach 99.9%. The inverter is equipped with an LCD display screen to monitor voltage, power, frequency, current, etc. So you can see the machine clearly in operation. The inverter adopts intelligent soft switching technology, high-frequency switching power supply technology, and 32-bit DSP full digital SPWM control technology, making the product strong anti-interference ability, fast operation speed, high intelligence, and a powerful functional system, which can meet the needs of users. The output and input of the system are completely electrically isolated, the insulation performance of the entire power distribution system is good, and the fully isolated booster circuit is safer and more reliable. The inverter has six protection functions: over-temperature protection, under-voltage alarm, under-voltage protection, over-voltage protection, short circuit protection, overload protection, etc. Besides, the IP65 waterproof design can prevent rain from eroding its surface, so you can use it with confidence. After the installation of the power station, you don’t need to do maintenance work. After a long time, you only need to remove the dust on the photovoltaic panel. Ith a size of 8.2714.721.57inch, the inverter adopts high-frequency telephone, micro processing, and other technologies, so it is smaller, lighter, and won’t occupy too much space. During installation, you can stack multiple inverters at will, form a single-phase parallel stacking. System, or conveniently form a three-phase system to provide a three-phase AC. We have been working hard to provide better service and quality for our customers, which is our goal. If there is any quality problem with our inverters. The inverter is equipped with two gaskets to help you install the photovoltaic support, making th. E inverter more stable. The inverter is provided with heat dissipation holes, which can play a good role in heat dissipation and prolong the service life of the inverter. This product is applicable to 30V or 36V solar panels, 36V batteries. The inverter can be widely used in residential or commercial areas for turning the direct current generated by solar panels into alternating current. Step 1: Install the inverter on the support of the photovoltaic panel with the screws provided by the machine. Step 2: Connect the positive and negative poles of the DC connection plug on the photovoltaic panel to the DC input book antiqua of the inverter. Step 3: Open the waterproof cover of the AC output interface of the inverter and connect the AC cable to the AC waterproof plug. Step 4: Connect the AC output cable to the AC main cable. Step 5: Repeat steps 1 to 3 to install and connect all inverters. Step 6: Connect the AC main cable to the public grid and start your green energy journey. Plug Type: US Standard. Maximum Input DC Voltage: 54V. Peak Power Tracking Voltage: 22-45V. Operating Voltage Range: 17-50V. Min/Max Start-up Voltage: 22-50VDC. Maximum DC Short Circuit Current: 80A. Maximum Input Operating Current: 54.4A. Peak Power Output: 1200watt. Rated Output Power: 1150watt. Rated Output Current: 9.58A. Rated Voltage Range: 80-160VAC. Rated Frequency Range: 57-62.5Hz. Max Unit Per Branch Circut: 3pcs(Single-phase). Static MPPT Efficiency: 99.5%. Maximum Output Efficiency: 91.2%. Night Time Power Loss. Ambient Temperature Range:? 40? 60? /? 40? 140? Communication Mode: Power Line Carrier. Power Transmission Mode: Reverse Transmission, Load Priority. Gross Weight: 4.08kg/8.99lbs. Net Weight: 2.88kg/6.35lbs. Product Size: 2137.44cm/8.2714.721.57inch. Package Size: 47.53411.5cm/18.713.394.53inch. Other Accessories for Installation. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. Durable MaterialEasy installationCreative Design. 1200W Grid Tie Inverter. 2137.44cm/8.2714.721.57inch. 47.53411.5cm/18.713.394.53inch. MPPT (Maximum Power Point Tracking). Maximum Input DC Voltage. Peak Power Tracking Voltage. Maximum DC Short Circuit Current. Maximum Input Operating Current. Max Unit Per Branch Circut. Reverse Transmission, Load Priority. 10 A or Less.

Category: solar | Comments Off

December 19

MPPT Grid Tie Solar Inverter 1000W AC 90V-140V Output Pure Sine Wave Inverter

Cs-head{overflow:hidden;position:relative}. Title{margin:0;font-weight:400;font-size:14px;padding:5px 10px}. Dc-dock:hover{width:117px;background-position:bottom right}. Dc-cs{clear:both;max-width:100vw}. Dock-rb{right:0;bottom:0}. Title{font-weight: 700;font-size: 18px}. Title:after{content:’You may like';color: #0d0c0d}. Cs-list>li:nth-child(n+7){display:none}. Title{margin:0;font-weight: 700;font-size: 17px}. Title:after{content:’You may like';color: #000000}. Coupon{transform-origin:right top;right:0}. Cs-list{margin:0 0 0 -20px;padding:0;background:#FFF}. Cs-list:before{display:table;line-height:0;content:}. Cs-list:after{clear:both}. Cs-list>li{float:left;width:16.66%;list-style:none;box-sizing:border-box;padding:10px 0 10px 20px;position:relative;margin:0}. Cs-list-col6>li{width:16.66%}. Cs-list-col7>li{width:14.28%;padding-left:18px}. Cs-list-col8>li{width:12.5%;padding-left:16px}. Cs-list-col9>li{width:11.11%;padding-left:15px}. Cs-list-col10>li{width:10%;padding-left:14px}. Cs-list-col11>li{width:9.09%;padding-left:12px}. Cs-list-col12>li{width:8.33%;padding-left:10px}. Cs-list>liwidth:33.33%! Cover:after{display:block;content:”;padding-top:100%;background-repeat:no-repeat;background-size:cover;background-position:center}. Cs-list a{text-decoration:none}. Title{color:#333;margin:5px 0}. Title:after{display:block;display:-webkit-box;-webkit-line-clamp:2;-webkit-box-orient:vertical;font-size:14px;line-height:1.4em;height:2.8em;overflow:hidden;white-space:normal;word-break:break-word;-webkit-hyphens:auto;-ms-hyphens:auto;hyphens:auto}. Plus{height:20px;overflow:hidden}. Price:after{content:”;font-size:14px}. Origin{margin-left:3px;font-size:12px;color:#AAA}. Origin:after{display:none;content:”;text-decoration:line-through}. Coupon{display:none;width:60px;height:60px;border-radius:50%;background:rgba(224,13,12.8);color:#FFF;position:absolute;top:10px;right:10px;text-align:center;padding-top:12px;box-sizing:border-box}. Coupon:before{content:”;font-size:20px}. Coupon:after{content:’Off';font-size:12px;position:absolute;bottom:8px;right:12px}. Title{min-height:12px}p:empty+hr{display:none}hr+span. Dc_tracker_img{display:none}#ds_div>. Dc_tracker_img:last-of-type{display:block} [data-lid=”134896201393″]. Title:after{content:’Solar Micro Inverter 1200W MPPT Grid Tie Pure Sine Wave DC to AC LCD Waterproof’}[data-lid=”134896201393″]. Coupon:before{content:’9%’} [data-lid=”134883900906″]. Title:after{content:’1000W Grid Tie Inverter 110V or 18V/36V Solar panel Pure Sine Wave Inverter MPPT’}[data-lid=”134883900906″]. Coupon:before{content:’6%’} [data-lid=”145714248428″]. Title:after{content:’Solar Micro Inverter 600W Grid Tie MPPT Pure Sine Wave DC to Waterproof’}[data-lid=”145714248428″]. Coupon:before{content:’6%’} [data-lid=”146265618709″]. Title:after{content:’4String Solar PV Combiner Box 63A Circuit Breaker Solar Panel System Waterproof’}[data-lid=”146265618709″]. Coupon:before{content:’9%’} [data-lid=”135299338606″]. Title:after{content:’Solar Grid Tie Micro Inverter 600W Grid Tie Waterproof Microinverter LCD-Display’}[data-lid=”135299338606″]. Coupon:before{content:’6%’} [data-lid=”145865800789″]. Title:after{content:’LED Working Light Lamp For Milling Machine Tool CNC Equipment IP65 Waterproof US’}[data-lid=”145865800789″]. Title:after{content:’Heavy Duty Shelf Brackets Strong Floating Shelf Bracket Right Angle Fixed Suppor’}[data-lid=”155950608128″]. Title:after{content:’Modern Plastic Storage Dresser Bedroom 6 Drawer Clothes Organizer Tower Cabinet’}[data-lid=”156541753600″]. Coupon:before{content:’6%’} [data-lid=”135285246465″]. Title:after{content:’Industrial Oilless Vacuum Pump Oil-Free Piston Vacuum Pump W/ Filter BEST SELL’}[data-lid=”135285246465″]. Coupon:before{content:’10%’} [data-lid=”133930040578″]. Title:after{content:’35-43mm Bench Clamp Mini Drill Press Stand Workbench Repair Tool Drilling Alu’}[data-lid=”133930040578″]. Coupon:before{content:’10%’} [data-lid=”135113544451″]. Title:after{content:’80W Nail Art Salon Dust Collector Vacuum Fan Cleaner Suction Manicure Tool Salon’}[data-lid=”135113544451″]. Coupon:before{content:’6%’} [data-lid=”145632721923″]. Title:after{content:’15L/30L Lipstick Paste Filler Heating Mixing Filling Machine Stirring Tank 1.5kw’}[data-lid=”145632721923″]. Coupon:before{content:’6%’} [data-lid=”145958874884″]. Title:aftercontent:’24\\.

Category: mppt | Comments Off

December 18

Solar Micro Inverter 1000W Grid Tie MPPT Pure Sine Wave DC to AC 18V/36V Panel

Description This grid tie inverter can effectively convert sunlight into clean green energy. It uses imported industrial electronic components, innovative MPPT technology and an isolated high-frequency transformer to make the efficiency higher than 99%, which is a more responsive, and higher output efficiency in photovoltaic power generation application systems. Its powerful output can effectively generate electricity for you. Key Features High-quality Material: The grid tie inverter is made of aluminum alloy, which is rust-free, heat-resistant, cold-resistant and anti-corrosion. It also uses imported industrial electronic components, which you can use for a long time. Environmental-friendly Choice: This grid tie inverter converts the direct current generated by the solar panel into alte. Solar Micro Inverter 1000W Grid Tie MPPT Pure Sine Wave DC to AC 18V/36V Panel. This grid tie inverter can effectively convert sunlight into clean green energy. High-quality Material: The grid tie inverter is made of aluminum alloy, which is rust-free, heat-resistant, cold-resistant and anti-corrosion. Environmental-friendly Choice: This grid tie inverter converts the direct current generated by the solar panel into alternating current, providing an environment-friendly and pollution-free continuous energy source. High Efficiency: The product adopts a unique circuit design, imported industrial electronic components, isolated high-frequency transformer, and unique MPPT technology, with efficiency greater than 99%, so it can achieve sensitive response and more stable maximum power point locking. Pure Sine Wave: The grid tie inverter provides the same clean and pure sine wave output as the power supply. It can better protect sensitive devices, provide stronger driving ability, and lower power consumption. Electrical Isolation: The complete electrical isolation of machine output and input makes the entire power distribution system well-insulated, and the use of a fully isolated step-up circuit makes its use safer and more reliable. Safe and Secure: This product has a great electrical protection function. And the sturdy aluminum alloy shell can better prevent rainwater from eroding the surface, dropping and collision, so you can use it with confidence. Flexible Installation: The grid tie inverter adopts the modular design of parallel components, so you can conduct distributed installation according to your specific needs. Excellent Cooling Capacity: It is equipped with a high-speed intelligent cooling fan. When the temperature exceeds 45? /113°F, it will automatically start to work to prevent the inverter from overheating. Small Floor Space: The size of this grid tie inverter is only 10.66.52.1inch, which does not occupy much space and can even be installed in small stores. High Security: This grid tie inverter has passed the professional CE and RoHS certifications. In addition, it also has some core technology patents for electronic circuit design, appearance design and so on. Therefore, it is a trustworthy product. Simple Structure: Its structure is simple. Therefore, you only need to clean the dust on the grid tie inverter without disassembly and reassembly. Gaskets: The inverter is equipped with two gaskets to help you install the photovoltaic support, making the inverter more stable. Heat Dissipation Holes: The body has multiple heat dissipation holes, which help the machine to dissipate heat and enable it to run smoothly. It is very suitable for grid-connected power generation in schools, power stations and households. It is applicable to 18V/36V solar panel and 18V/36V battery. AC Output Power:1000W. Maximum AC Output Power:1050W. AC Output Voltage: 110V(AC 90V-140V). DC Input: DC 20V-50V. Frequency Range: 48- 62Hz(Self-adaption). Scope of Application: 18V/36V Solar Panel and 18V/36V Battery. Package Size: 352010cm/13.87.93.9in. Product Size: 2116.55.3cm/10.66.52.1in. Gross Weight: 4kg/8.8lbs. Net Weight: 3.5kg/7.7lbs. 1 Set English Manual. All Accessories for Assembly. Please note that the input and output voltage must be within the voltage range of the product. Please note that the output port of the inverter must be connected to the household power grid socket (civil single-phase power grid) through an AC power line so that the product can work normally! Please note that the PV input power is recommended to be greater than 20% of the rated power of the product. Please note that the Vmp of the solar panel must be within the MPPT range to ensure the best MPPT maximum power output. We recommend using 18V/36V photovoltaic panels (VOC voltage between 26-50V) or 18V/36V batteries as input power to obtain better output power. Please note that the DC terminal must be tightened, otherwise, the product may be damaged. Please note that the grid tie inverter cannot be used as off grid/stand alone solar system. The output needs to be connected to the grid power. And it can not supply power directly to the AC loads. Please read the operating manual completely before use. And pay particular attention to the safety instructions included. Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. Compact Design, Unique Appearance, High quality. Nice and Practical, High Quality Packaging. Convenient Use, Easy Operation, Easy installation. Creative Design, Durable Material, Beautiful Appearance. Creative Design, Durable Material, Beautiful. Compact Design, Unique Appearance, high reliability. Home/Garden, Agriculture/Farming, Commercial, Irrigation. MPPT (Maximum Power Point Tracking). Abrasion Resistant, Chemical Resistant, Corrosion Resistant. Maximum AC Output Power. 2116.55.3cm/10.66.52.1in.

Category: solar | Comments Off

December 18

Grid Tie Solar Power Inverter AC 90V-140V Output MPPT Pure Sine Wave 110V 1000W

1000W MPPT Grid Tie Inverter Pure Sine Wave Inverter 110V For 36V Solar Panel Description This grid tie inverter can effectively convert sunlight into clean green energy. It uses imported industrial electronic components, innovative MPPT technology and an isolated high-frequency transformer to make the efficiency higher than 99%, which is a more responsive, and higher output efficiency in photovoltaic power generation application systems. Its powerful output can effectively generate electricity for you. Key Features High-quality Material: The grid tie inverter is made of aluminum alloy, which is rust-free, heat-resistant, cold-resistant and anti-corrosion. It also uses imported industrial electronic components, which you can use for a long time. Environmental-friendly Choice: This g. Grid Tie Solar Power Inverter AC 90V-140V Output MPPT Pure Sine Wave 110V 1000W. 1000W MPPT Grid Tie Inverter Pure Sine Wave Inverter 110V For 36V Solar Panel. This grid tie inverter can effectively convert sunlight into clean green energy. High-quality Material: The grid tie inverter is made of aluminum alloy, which is rust-free, heat-resistant, cold-resistant and anti-corrosion. Environmental-friendly Choice: This grid tie inverter converts the direct current generated by the solar panel into alternating current, providing an environment-friendly and pollution-free continuous energy source. High Efficiency: The product adopts a unique circuit design, imported industrial electronic components, isolated high-frequency transformer, and unique MPPT technology, with efficiency greater than 99%, so it can achieve sensitive response and more stable maximum power point locking. Pure Sine Wave: The grid tie inverter provides the same clean and pure sine wave output as the power supply. It can better protect sensitive devices, provide stronger driving ability, and lower power consumption. Electrical Isolation: The complete electrical isolation of machine output and input makes the entire power distribution system well-insulated, and the use of a fully isolated step-up circuit makes its use safer and more reliable. Safe and Secure: This product has a great electrical protection function. And the sturdy aluminum alloy shell can better prevent rainwater from eroding the surface, dropping and collision, so you can use it with confidence. Flexible Installation: The grid tie inverter adopts the modular design of parallel components, so you can conduct distributed installation according to your specific needs. Excellent Cooling Capacity: It is equipped with a high-speed intelligent cooling fan. When the temperature exceeds 45? /113°F, it will automatically start to work to prevent the inverter from overheating. Small Floor Space: The size of this grid tie inverter is only 10.66.52.1inch, which does not occupy much space and can even be installed in small stores. High Security: This grid tie inverter has passed the professional CE and RoHS certifications. In addition, it also has some core technology patents for electronic circuit design, appearance design and so on. Therefore, it is a trustworthy product. Simple Structure: Its structure is simple. Therefore, you only need to clean the dust on the grid tie inverter without disassembly and reassembly. Gaskets: The inverter is equipped with two gaskets to help you install the photovoltaic support, making the inverter more stable. Heat Dissipation Holes: The body has multiple heat dissipation holes, which help the machine to dissipate heat and enable it to run smoothly. It is very suitable for grid-connected power generation in schools, power stations and households. It is applicable to 36V solar panel and 36V battery. AC Output Power:1000W. Maximum AC Output Power:1050W. AC Output Voltage: 110V(AC90-140V, 170-260V). Frequency Range: 48- 62Hz(Self-adaption). Scope of Application: 36V Solar Panel and 36V Battery. Package Size: 352010cm/13.87.93.9in. Product Size: 2116.55.3cm/10.66.52.1in. Gross Weight: 4kg/8.8lbs. Net Weight: 3.5kg/7.7lbs. 1 Set English Manual. All Accessories for Assembly. Please note that the input and output voltage must be within the voltage range of the product. Please note that the output port of the inverter must be connected to the household power grid socket (civil single-phase power grid) through an AC power line so that the product can work normally! Please note that the PV input power is recommended to be greater than 20% of the rated power of the product. Please note that the Vmp of the solar panel must be within the MPPT range to ensure the best MPPT maximum power output. We recommend using 36V photovoltaic panels (VOC voltage between 26-50V) or 36V batteries as input power to obtain better output power. Please note that the DC Arial must be tightened, otherwise, the product may be damaged. Please note that the grid tie inverter cannot be used as off grid/stand alone solar system. The output needs to be connected to the grid power. And it can not supply power directly to the AC loads. Please read the operating manual completely before use. And pay particular attention to the safety instructions included. Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday.

Category: grid | Comments Off

December 17

Grid Tie Solar Power Inverter AC 90V-140V Output MPPT Pure Sine Wave 110V 1000W

Category: grid | Comments Off

December 17

Solar Micro Inverter 1000W Grid Tie MPPT Pure Sine Wave DC to AC 18V/36V Panel

Category: solar | Comments Off

December 16

Grid Tie Solar Power Inverter AC 90V-140V Output MPPT Pure Sine Wave 110V 1000W

Description This grid tie inverter can effectively convert sunlight into clean green energy. It uses imported industrial electronic components, innovative MPPT technology and an isolated high-frequency transformer to make the efficiency higher than 99%, which is a more responsive, and higher output efficiency in photovoltaic power generation application systems. Its powerful output can effectively generate electricity for you. Key Features High-quality Material: The grid tie inverter is made of aluminum alloy, which is rust-free, heat-resistant, cold-resistant and anti-corrosion. It also uses imported industrial electronic components, which you can use for a long time. Environmental-friendly Choice: This grid tie inverter converts the direct current generated by the solar panel into alte. Grid Tie Solar Power Inverter AC 90V-140V Output MPPT Pure Sine Wave 110V 1000W. Welcome to our store. 1000W MPPT Grid Tie Inverter Pure Sine Wave Inverter 110V For 36V Solar Panel. This grid tie inverter can effectively convert sunlight into clean green energy. High-quality Material: The grid tie inverter is made of aluminum alloy, which is rust-free, heat-resistant, cold-resistant and anti-corrosion. Environmental-friendly Choice: This grid tie inverter converts the direct current generated by the solar panel into alternating current, providing an environment-friendly and pollution-free continuous energy source. High Efficiency: The product adopts a unique circuit design, imported industrial electronic components, isolated high-frequency transformer, and unique MPPT technology, with efficiency greater than 99%, so it can achieve sensitive response and more stable maximum power point locking. Pure Sine Wave: The grid tie inverter provides the same clean and pure sine wave output as the power supply. It can better protect sensitive devices, provide stronger driving ability, and lower power consumption. Electrical Isolation: The complete electrical isolation of machine output and input makes the entire power distribution system well-insulated, and the use of a fully isolated step-up circuit makes its use safer and more reliable. Safe and Secure: This product has a great electrical protection function. And the sturdy aluminum alloy shell can better prevent rainwater from eroding the surface, dropping and collision, so you can use it with confidence. Flexible Installation: The grid tie inverter adopts the modular design of parallel components, so you can conduct distributed installation according to your specific needs. Excellent Cooling Capacity: It is equipped with a high-speed intelligent cooling fan. When the temperature exceeds 45? /113°F, it will automatically start to work to prevent the inverter from overheating. Small Floor Space: The size of this grid tie inverter is only 10.66.52.1inch, which does not occupy much space and can even be installed in small stores. High Security: This grid tie inverter has passed the professional CE and RoHS certifications. In addition, it also has some core technology patents for electronic circuit design, appearance design and so on. Therefore, it is a trustworthy product. Simple Structure: Its structure is simple. Therefore, you only need to clean the dust on the grid tie inverter without disassembly and reassembly. Gaskets: The inverter is equipped with two gaskets to help you install the photovoltaic support, making the inverter more stable. Heat Dissipation Holes: The body has multiple heat dissipation holes, which help the machine to dissipate heat and enable it to run smoothly. It is very suitable for grid-connected power generation in schools, power stations and households. It is applicable to 36V solar panel and 36V battery. AC Output Power:1000W. Maximum AC Output Power:1050W. AC Output Voltage: 110V(AC90-140V, 170-260V). DC Input: DC 20V-50V. Frequency Range: 48- 62Hz(Self-adaption). Scope of Application: 36V Solar Panel and 36V Battery. Package Size: 352010cm/13.87.93.9in. Product Size: 2116.55.3cm/10.66.52.1in. Gross Weight: 4kg/8.8lbs. Net Weight: 3.5kg/7.7lbs. 1 Set English Manual. All Accessories for Assembly. Please note that the input and output voltage must be within the voltage range of the product. Please note that the output port of the inverter must be connected to the household power grid socket (civil single-phase power grid) through an AC power line so that the product can work normally! Please note that the PV input power is recommended to be greater than 20% of the rated power of the product. Please note that the Vmp of the solar panel must be within the MPPT range to ensure the best MPPT maximum power output. We recommend using 36V photovoltaic panels (VOC voltage between 26-50V) or 36V batteries as input power to obtain better output power. Please note that the DC Tahoma must be tightened, otherwise, the product may be damaged. Please note that the grid tie inverter cannot be used as off grid/stand alone solar system. The output needs to be connected to the grid power. And it can not supply power directly to the AC loads. Please read the operating manual completely before use. And pay particular attention to the safety instructions included. Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday.

Category: grid | Comments Off

December 16

Solar Micro Inverter MPPT Grid Tie Inverter Pure Sine WaveDC22-50V to AC90-140V

1000W Solar Grid Tie Inverter DC22-50V to AC90V/140V Pure Sine Wave Inverter. This grid tie inverter can effectively convert sunlight into clean green energy. It uses imported industrial electronic components, innovative MPPT technology and an isolated high-frequency transformer to make the efficiency higher than 99%, which is a more responsive, and higher output efficiency in photovoltaic power generation application systems. Its powerful output can effectively generate electricity for you. High-quality Material: The grid tie inverter is made of aluminum alloy, which is rust-free, heat-resistant, cold-resistant and anti-corrosion. It also uses imported industrial electronic components, which you can use for a long time. Environmental-friendly Choice: This grid tie inverter converts the direct current generated by the solar panel into alternating current, providing an environment-friendly and pollution-free continuous energy source. High Efficiency: The product adopts a unique circuit design, imported industrial electronic components, isolated high-frequency transformer, and unique MPPT technology, with efficiency greater than 99%, so it can achieve sensitive response and more stable maximum power point locking. Pure Sine Wave: The grid tie inverter provides the same clean and pure sine wave output as the power supply. It can better protect sensitive devices, provide stronger driving ability, and lower power consumption. Electrical Isolation: The complete electrical isolation of machine output and input makes the entire power distribution system well-insulated, and the use of a fully isolated step-up circuit makes its use safer and more reliable. Safe and Secure: This product has a great electrical protection function. And the sturdy aluminum alloy shell can better prevent rainwater from eroding the surface, dropping and collision, so you can use it with confidence. Flexible Installation: The grid tie inverter adopts the modular design of parallel components, so you can conduct distributed installation according to your specific needs. Excellent Cooling Capacity: It is equipped with a high-speed intelligent cooling fan. When the temperature exceeds 45? /113°F, it will automatically start to work to prevent the inverter from overheating. Small Floor Space: The size of this grid tie inverter is only 10.66.52.1inch, which does not occupy much space and can even be installed in small stores. High Security: This grid tie inverter has passed the professional CE and RoHS certifications. In addition, it also has some core technology patents for electronic circuit design, appearance design and so on. Therefore, it is a trustworthy product. Simple Structure: Its structure is simple. Therefore, you only need to clean the dust on the grid tie inverter without disassembly and reassembly. Gaskets: The inverter is equipped with two gaskets to help you install the photovoltaic support, making the inverter more stable. Heat Dissipation Holes: The body has multiple heat dissipation holes, which help the machine to dissipate heat and enable it to run smoothly. It is very suitable for grid-connected power generation in schools, power stations and households. It is applicable to 36V solar panel and 36V battery. AC Output Power:1000W. Maximum AC Output Power:1050W. AC Output Voltage: 110V(AC 90V-140V)170-260V. Frequency Range: 48- 62Hz(Self-adaption). Scope of Application: 36V Solar Panel and 36V Battery. Package Size: 352010cm/13.87.93.9in. Product Size: 2116.55.3cm/10.66.52.1in. Gross Weight: 4kg/8.8lbs. Net Weight: 3.5kg/7.7lbs. 1 Set English Manual. All Accessories for Assembly. Please note that the input and output voltage must be within the voltage range of the product. Please note that the output port of the inverter must be connected to the household power grid socket (civil single-phase power grid) through an AC power line so that the product can work normally! Please note that the PV input power is recommended to be greater than 20% of the rated power of the product. Please note that the Vmp of the solar panel must be within the MPPT range to ensure the best MPPT maximum power output. We recommend using 36V photovoltaic panels (VOC voltage between 26-50V) or 36V batteries as input power to obtain better output power. Please note that the DC terminal must be tightened, otherwise, the product may be damaged. Please note that the grid tie inverter cannot be used as off grid/stand alone solar system. The output needs to be connected to the grid power. And it can not supply power directly to the AC loads. Please read the operating manual completely before use. And pay particular attention to the safety instructions included. Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. Home/Garden, Agriculture/Farming, Commercial, Irrigation. MPPT (Maximum Power Point Tracking). Abrasion Resistant, Chemical Resistant, Corrosion Resistant. Maximum AC Output Power. 110V(AC 90V-140V)170-260V. 36V Solar Panel and 36V Battery. 2116.55.3cm/10.66.52.1in.

Category: solar | Comments Off

December 15

Solar Inverter Grid Tie 1000With2000W Pure Sine Wave Source Solar Panel or Battery

Advantage of The Sunshine Grid Tie Power System. There are many advantages of SGPV compare with the traditional grid tie power system. Low cost and easy installation – SGPV can make full use of all types of buildings’ surfaces that face the sun in the city as well as fast and easy installation of solar modules and grid tie inverter. It just needs very low maintenance costs. Free combination – SGPV can be used as a separate grid tie system and set up as a large solar array with many of them. The quantity of SGPV in the array is just according to your desire. Combination of SGPV does not interact – The traditional solar grid tie system is always connected with many panels. Those solar panels are connected in series, so the input voltage is very high, although, the traditional grid inverter has an MPPT feature (Maximum Power Point Tracking), but the maximum power point is according to the entire series in terms of solar panels array, if the performance of one piece of solar panels in the system, for some reason, such as leaves, bird droppings, dust, shadow, etc. And degrades, the performance of the entire solar power system will decrease. SGPV system has no such disadvantage. If the performance of a piece of solar panels in the system degrades, this just effects one SGPV, will not affect other SGPV in the system. Improving the efficiency of the entire solar power system – In a traditional grid tie system, many solar panels are connected in series, so the MPPT of the inverter is according to the total panels in series, not to every panel. Still, there is a difference between every panel, so not every panel is working at the maximum power, this will reduce the total power of these panels in series. But SGPV has no such disadvantage. Because every inverter of SGPV has MPPT function, so every panel is working at the maximum power, this will increase the efficiency of the entire system. Low power consumption – Most of the parts in the small grid tie inverter are digital ICs and low power MCU, so the power consumption of it is low. Though the quantity of grid tie inverters is increased, this will not increase the power consumption much of the entire system. How to Choose Solar Panels? The most important specifications when selecting solar panels are Pmax, Voc, Vmp, and Isc. 1, The total Pmax of solar panels should be equal to or less than the Rated Power(Peak)of the inverter that you will connect. 2, The total Voc of solar panels should be less than the maximum point of the DC input range of the inverter. It is according to the connecting method if you connect solar panels in parallel, all panels must have the same Voc, the Pmax of each panel can be difffferent or same, so the total Voc is as same as one Voc, but if you connect solar panels in serial, the Isc of each solar panel must be same, the Pmax of each panel can be different or same, so the total Voc is the summation of all solar panels connected in serial. Connecting solar panels with the same specififications in a single system is the best choice. 3, The total Vmp of solar panels should above the minimum point of the DC input range of the inverter. The connecting method principle is as same as item 2 above. The two connecting method diagrams are shown in Fig. Comparing the connected method in Fig. 4 and Fig5, we can see that method 2 is a good choice because with method 1, the DC cables are thicker, so it is more expensive, and three pairs of connectors for parallel connecting plus three pairs of solar connectors should be used. But with method 2, the DC cables are thin, and just a pair of connectors for parallel connecting and a pair of MC4connectors should be used. How to Connect it? Why our grid tie inverters need limit function? It is in response to the overwhelming clamor fromour customers for a function that can control the amount of power that the grid tie inverters can generate. With this function, the inverters will just generate power that is not larger than the loads’ power even theinverters are connected with big power solar panel array, we call it “limit function”. Because in some countries, the producer pays for the excess power it gives to the distribution grid. This isbecause the electric power meter(the one provided by the electricity provider in the area) is not aware of thedirection of power flow. In other words it only adds even if power is exported to the grid, thus, the consumerwill be charged for power even if it is given to the grid, and this is the problem. Our SUN G2 series grid tie inverters are integrated this limit function, so SUN G2 series inverters can work in limitmode or normal mode(no limit), you can make the configuration on the LCD display. The Belowing is Limitter. DC Input Positive Terminal. This terminal will connect to the positive wire of solar cables connected with the positive pole of the solar panels. DC Input Negative Terminal. This terminal will connect to the negative wire of solar cables connected with the negative pole of the solar panels. This socket will connect the inverter to the public grid via the AC cable. The Inverter display can show many information. The main interface of the display and the icon explanations are shown above. In this interface, the LCD backlight can be set to always on or auto turn offff after 3 minutes no action. The inverter also integrates with limit function, preventing excess power from going to the public grid. Select “Internal Limiter”, the inverter will work under limit mode. The inverter’s output power will be determined by load power. For more details about the limit function. Please read the user manual of the limit function. On this screen, you can select “Bat or solar limit Current Mode, ” which allows you to limit the DC input current by adjusting the numbers. You also need to set the low protect voltageand reboot voltage. This is very useful for batterydischarge. You also can select “Bat or solar limit Power Mode, ” this function is similar to Bat or solar. Limit Current Mode, just use power to replace thecurrent. Save the setting after you reconfifigure the working mode or backlight setting. If you want to control the work time of the inverter, you need to set the work time controller page. If you haven’t selected any of these four options, then the work time controller function will be disabled. If you have selected any of these four options, the. Selected options will be available, the inverter will work from the start time(left two columns, HH-MM) to stop time(right two columns, HH-MM). The inverter will stop to produce any power at other time that has not been selected. This interface will show the real time grid waveform. The grid voltage and frequency also will show in this interface. The energy interface will show the power generation curve every day. Today KWH and Total KWH are also shown in this interface. In this interface, the display shows real time power, PV input voltage, inside temperature, date, and time. Clock And Date Setting. Set the clock and date on this page, save the setting before exit. Solar Panel VOC 60V C? Harge Current 20A. Solar Inverter Grid Tie 1000W Pure Sine Wave US. EPEVER 30A MPPT LCD MPPT Solar Charge Controller MT50 Battery regulator US. EPEVER Solar Charge Controller The Newest BLE for Tracer XTRAN TRIRON US.

Category: solar | Comments Off

December 15

Solar Micro Inverter Waterproof WVC-1200W Grid Tie MPPT Pure Sine Wave DC to AC

Description An inverter can efficiently turn the direct current generated by solar panels into the alternating current used by household appliances. This micro inverter makes it easier. Made of fine aluminum alloy, this IP65 waterproof inverter has a wide range of functions, good safety, convenient installation, and high-cost performance. We believe this inverter will not disappoint you. 1200W DC Micro Solar Panel Smart Inverter Pure Sine Wave MPPT Grid Tie Inversor. ? Welcome to our store?? 1200W Solar Grid Tie Micro Inverter For Solar Panel Grid Tie Inverter With LCD. Please install the inverter correctly according to the instructions. If you have any questions, please contact the relevant personnel. Please don’t dismantle the machine. Only qualified maintenance personnel can repair the inverter. Please install the inverter in a place with low humidity and good ventilation to avoid overheating the inverter and remove the surrounding inflammable and explosives. When using this inverter, please take good care of your children to prevent them from touching and playing to avoid electric shock. Please note that our products are grid-connected, the AC output port has to be connected to the home grid in order to achieve grid-connected power generation. When the input load is with solar panels, it is important that the VOC voltage is between 30-48V. We recommend that the solar panel is configured for 20% more power than the power of the product. For example, if the product is 600W, the total power of the solar panels should be between. When the input load is a battery, we recommend a battery voltage of 36V, which can be connected in series with. Please note that the positive and negative polarity should not be reversed when connecting the product. The recommended battery current is 36V/10mah for 3. 00W, 36V/20mah for 600W. The input and output voltage of the configuration is within the normal operating voltage range of the product in order for the product to work properly and achieve grid-connected power generation. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement. Please make sure you do not mind before you order. An inverter can efficiently turn the direct current generated by solar panels into the alternating current used by household appliances. Made of fine aluminum alloy, this. Inverter has a wide range of functions, good safety, convenient installation, and high-cost performance. The inverter is made of aluminum alloy, which is durable. And not easy to rust. You can use it for a long time without frequent replacement, and your cost can be saved. The inverter has built-in high-precision maximum power point tracking, which can optimize the power collection from the solar panel, accurately capture and lock the maximum output power point, and greatly increase power generation to more than 25%. In addition, the efficient power reverse transmission technology can transmit the power that can not be used up to the grid in the reverse direction to other places for use, and the power transmission rate can reach. The inverter is equipped with an. To monitor voltage, power, frequency, current, etc. So you can see the machine clearly in operation. The inverter adopts intelligent soft switching technology, high-frequency switching power supply technology, and. 32-bit DSP full digital SPWM control. Technology, making the product strong anti-interference ability, fast operation speed, high intelligence, and a powerful functional system, which can meet the needs of users. The output and input of the system are completely electrically isolated, the insulation performance of the entire power distribution system is good, and the fully isolated booster circuit is safer and more reliable. The inverter has six protection functions: over-temperature protection, under-voltage alarm, under-voltage protection, over-voltage protection, short circuit protection, overload protection, etc. Design can prevent rain from eroding its surface, so you can use it with confidence. After the installation of the power station, you don’t need to do maintenance work. After a long time, you only need to remove the dust on the photovoltaic panel. Ith a size of. 8.2714.721.57inch. The inverter adopts high-frequency telephone, micro processing, and other technologies, so it is smaller, lighter, and won’t occupy too much space. During installation, you can stack multiple inverters at will, form a single-phase parallel stacking. System, or conveniently form a three-phase system to provide a. We have been working hard to provide better service and quality for our customers, which is our goal. If there is any quality problem with our inverters. The inverter is equipped with two gaskets to help you install the photovoltaic support, making th. E inverter more stable. The inverter is provided with heat dissipation holes, which can play a good role in heat dissipation and prolong the service life of the inverter. This product is applicable to. 30V or 36V solar panels, 36V batteries. The inverter can be widely used in residential or commercial areas for turning the direct current generated by solar panels into alternating current. Step 1: Install the inverter on the support of the photovoltaic panel with the screws provided by the machine. Step 2: Connect the positive and negative poles of the. Connection plug on the photovoltaic panel to the DC input tahoma of the inverter. Step 3: Open the waterproof cover of the AC output interface of the inverter and connect the AC cable to the AC waterproof plug. Step 4: Connect the AC output cable to the AC main cable. Step 5: Repeat steps 1 to 3 to install and connect all inverters. Step 6: Connect the AC main cable to the public grid and start your green energy journey. Material: Aluminium Alloy. Plug Type: US Standard. Maximum Input DC Voltage. Peak Power Tracking Voltage: 22-45V. Operating Voltage Range: 17-50V. Min/Max Start-up Voltage: 22-50VDC. Maximum DC Short Circuit Current: 80A. Maximum Input Operating Current: 54.4A. Peak Power Output. Rated Output Power: 1150watt. Rated Output Current. Rated Voltage Range: 80-160VAC. Rated Frequency Range: 57-62.5Hz. Power Factor: >99%. Max Unit Per Branch Circut: 3pcs(Single-phase). Static MPPT Efficiency. Maximum Output Efficiency: 91.2%. Night Time Power Loss. Total Flow Distortion. Ambient Temperature Range:? 40? 60? /? 40? 140? Cooling Method: Self-cooling. Communication Mode: Power Line Carrier. Power Transmission Mode: Reverse Transmission, Load Priority. Gross Weight: 4.08kg/8.99lbs. Net Weight: 2.88kg/6.35lbs. 2137.44cm/8.2714.721.57inch. Package Size: 47.53411.5cm/18.713.394.53inch. Other Accessories for Installation. Welcome to our store for shopping. Our store has a wide range of product categories for you to choose from. And we will recommend the products you need. ? Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. 1200W Grid Tie Inverter. MPPT (Maximum Power Point Tracking). Peak Power Tracking Voltage. Maximum DC Short Circuit Current. Maximum Input Operating Current. Max Unit Per Branch Circut. Reverse Transmission, Load Priority. 47.53411.5cm/18.713.394.53inch. 10 A or Less.

Category: solar | Comments Off

December 2024
M	T	W	T	F	S	S
« Nov
						1
2	3	4	5	6	7	8
9	10	11	12	13	14	15
16	17	18	19	20	21	22
23	24	25	26	27	28	29
30	31