Power One Solar Grid Tied 3.6kW Solar Inverter (PVI-3.6-OUTD) withDC Safety Switch

Power One Solar Grid Tied 3.6kW Solar Inverter (PVI-3.6-OUTD) w/DC Safety Switch. Used, in good physical condition. Product was subject to physical inspection for signs of adverse exterior wear as well as internally for signs of damage from fire/water/exposure. Housing bears some signs of fading or sun damage to front panel. Product comes housed in original packaging with set of panel covers/gaskets as well as a number for through holes. 1x Power One Solar Grid Tied 3.6kW Solar Inverter (PVI-3.6-OUTD) w/DC Safety Switch. Does not include any additional cables, parts or accessories. Maximum output power wattage. Rated grid AC voltage. Number of independent MPPT channels. Maximum usable power for each channel. Absolute maximum voltage (Vmax). Full power MPPT voltage range. Operating MPPT voltage range. 0.7 x Vstart – 580V (90V). Maximum current (Idcmax) for both MPPT in parallel. Maximum usable current per channel. Maximum short circuit current limit per channel. Number of wire landing terminals per channel. Terminal block, pressure clamp, AWG20-AWG6. Adjustable voltage range (Vmin-Vmax) (V). Adjustable grid frequency range. Maximum current (Iac, max). > 0.995 (adjustable to ±0.8). Total harmonic distortion at rated power. Grid wiring termination type. Terminal block, Pressure clamp, AWG20-AWG6. Varistor, 2 for each channel. PV array ground fault detection. Pre start-up RISO and dynamic GFDI (requires floating arrays). Meets UL1741 / IEEE1547 requirements. Varistor, 2 (L1 – L2 / L1 – G). 16 characters x 2 lines LCD display. Remote monitoring 1xRS485 incl. VSN700 Data Logger opt. , VSN300 Wifi Logger Card opt. Ambient air operating temperature range. 13°F to +140°F (-25°C to 60°C) with derating above 122°F (50°C). Ambient air storage temperature range. 40°F to +176°F (-40°C to +80°C). Acoustic noise emission level. Maximum operating altitude without derating. Natural convection, AL Heatsink. Bottom: (2) pre-drilled opening for ¾ inch conduits and concentric markings for 1 inch (both sides) and 1½ inch conduit (DC side only). Sides: (2) pre-drilled opening for ¾ inch conduits with concentric markings for 1 inch (both sides) and 1½ inch conduit (DC side only). Back: (2) concentric markings for ¾ inch and 1 inch conduits. We take pride in packing items carefully to ensure safe arrival. Please check out our other items! The item “Power One Solar Grid Tied 3.6kW Solar Inverter (PVI-3.6-OUTD) withDC Safety Switch” is in sale since Sunday, December 6, 2020. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “arg-tech” and is located in Goffstown, New Hampshire. This item can be shipped to United States, Canada, United Kingdom, China, Germany, Japan, France, Australia, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, Sweden, South Korea, Indonesia, Taiwan, South africa, Belgium, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Austria, Bahamas, Israel, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Pakistan, Paraguay, Reunion, Uruguay.

Size: 33.8 x 12.8 x 8.7 inches
Current Rating: 20.0 A
Model: 3.6 kW Single Phase Model
Connector Type: 1/2W Split-/3W 1/2W
Custom Bundle: No
Wattage: 3.6 Kilowatts
Current Type: DC to AC inverter
System Configuration: Grid-Tie
Material: Aluminum, Rigid Plastic
Maximum Input Voltage: 600 VDC
Power Source: Solar
Type: Charger/Inverter
Features: Automatic Voltage Detection
Wire Gauge: AWG20-6
Color: White
MPN: PVI-3.6-OUTD-S-US
Recommended Environment: Outdoor
Item Length: 33.8 inches
Protection Properties: Anti-Island Protection
Power: 3600 W – 4000 W
Current Output: 20 A
Brand: Power One
Application: Electronics
Charging Mode: MPPT (Maximum Power Point Tracking)
Resistance Properties: Dustproof
Voltage: 90 – 600 VDC

Category: power | Comments Off

November 9

Power One Solar Grid Tied 3.6kW Solar Inverter (PVI-3.6-OUTD) withDC Safety Switch

Power One Solar Grid Tied 3.6kW Solar Inverter (PVI-3.6-OUTD) w/DC Safety Switch. Used, in good physical condition. Product was subject to physical inspection for signs of adverse exterior wear as well as internally for signs of damage from fire/water/exposure. Housing bears some signs of fading or sun damage to front panel. Product comes housed in original packaging with set of panel covers/gaskets as well as a number for through holes. 1x Power One Solar Grid Tied 3.6kW Solar Inverter (PVI-3.6-OUTD) w/DC Safety Switch. Does not include any additional cables, parts or accessories. Maximum output power wattage. Rated grid AC voltage. Number of independent MPPT channels. Maximum usable power for each channel. Absolute maximum voltage (Vmax). Full power MPPT voltage range. Operating MPPT voltage range. 0.7 x Vstart – 580V (90V). Maximum current (Idcmax) for both MPPT in parallel. Maximum usable current per channel. Maximum short circuit current limit per channel. Number of wire landing terminals per channel. Terminal block, pressure clamp, AWG20-AWG6. Adjustable voltage range (Vmin-Vmax) (V). Adjustable grid frequency range. Maximum current (Iac, max). > 0.995 (adjustable to ±0.8). Total harmonic distortion at rated power. Grid wiring termination type. Terminal block, Pressure clamp, AWG20-AWG6. Varistor, 2 for each channel. PV array ground fault detection. Pre start-up RISO and dynamic GFDI (requires floating arrays). Meets UL1741 / IEEE1547 requirements. Varistor, 2 (L1 – L2 / L1 – G). 16 characters x 2 lines LCD display. Remote monitoring 1xRS485 incl. VSN700 Data Logger opt. , VSN300 Wifi Logger Card opt. Ambient air operating temperature range. 13°F to +140°F (-25°C to 60°C) with derating above 122°F (50°C). Ambient air storage temperature range. 40°F to +176°F (-40°C to +80°C). Acoustic noise emission level. Maximum operating altitude without derating. Natural convection, AL Heatsink. Bottom: (2) pre-drilled opening for ¾ inch conduits and concentric markings for 1 inch (both sides) and 1½ inch conduit (DC side only). Sides: (2) pre-drilled opening for ¾ inch conduits with concentric markings for 1 inch (both sides) and 1½ inch conduit (DC side only). Back: (2) concentric markings for ¾ inch and 1 inch conduits. We take pride in packing items carefully to ensure safe arrival. Please check out our other items! The item “Power One Solar Grid Tied 3.6kW Solar Inverter (PVI-3.6-OUTD) withDC Safety Switch” is in sale since Thursday, October 8, 2020. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “arg-tech” and is located in Goffstown, New Hampshire. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Pakistan, Paraguay, Reunion, Uruguay.

Size: 33.8 x 12.8 x 8.7 inches
Current Rating: 20.0 A
Model: 3.6 kW Single Phase Model
Connector Type: 1/2W Split-/3W 1/2W
Custom Bundle: No
Wattage: 3.6 Kilowatts
Current Type: DC to AC inverter
System Configuration: Grid-Tie
Material: Aluminum, Rigid Plastic
Maximum Input Voltage: 600 VDC
Power Source: Solar
Type: Charger/Inverter
Features: Automatic Voltage Detection
Wire Gauge: AWG20-6
Color: White
MPN: PVI-3.6-OUTD-S-US
Recommended Environment: Outdoor
Item Length: 33.8 inches
Protection Properties: Anti-Island Protection
Power: 3600 W – 4000 W
Current Output: 20 A
Brand: Power One
Application: Electronics
Charging Mode: MPPT (Maximum Power Point Tracking)
Resistance Properties: Dustproof
Voltage: 90 – 600 VDC

Category: power | Comments Off

December 9

SolarEdge SE7600A 500Vdc 8350W 264Vac Single Phase Inverter with DC Safety Switch

SolarEdge SE7600A 500Vdc 8350W 264Vac Single Phase Inverter w/ DC Safety Switch. All parts, accessories, cables, etc. Are only included if pictured or listed in description. Due to our limited resources, we are unable to properly test this item. Exterior has minor scuffs, scratches and adhesive residue. Inputs and connectors appear to be undamaged and intact. Unit Dimensions (L” x W” x H): 35 x 12.125 x 9. On a scale from 1 – 10, with 10 being in new or excellent condition, this item is rated as a. Please review images thoroughly before purchasing. Additional information may be found searching online. We do not have additional info. Only pictured items will be included. All parts, including accessories and cables are only in cluded if pictured or listed in the description. All pictures are taken in house. As a large liquidator, we do not carry additional information beyond what has been provided to us above. The sale of this item may be subject to regulation by the U. Food and Drug Administration and state and local regulatory agencies. This unit has been used. It has been cleaned in accordance with the manufacturers guidelines by the medical facility from which we received it. Our Contact: Rodney Wang SVC ASSET MANAGEMENT, INC. NOT AVAILABLE FOR INTERNATIONAL. Please check with your country’s requirements before purchasing. Please call to verify we’ve received your request. International customers must arrange for their own carrier pick-up. If you do receive the package, submit clear images of the packaging/box and damaged item from multiple angles. DO NOT discard the packaging. Save packaging for carrier claim. We cannot file a claim without the packaging and proper images. Thank you for your help and understanding. Let us save you time & aggravation by showing you the true meaning of customer service! We’ve been in business for over a decade. Your satisfaction is extremely important to us. We strive for excellence and appreciate the opportunity to work with you in resolving any issues. Since we’re a liquidation house that deals with many vendors and have thousands of products online, it stands to reason that issues will arise occasionally. We’re eager to find an amicable solution when it does. We know you have a choice and appreciate your business. Let us earn your loyalty! DOA stands for Dead On Arrival, meaning that the item did not function properly when it arrived. Please read below for exclusions. Toner, ink cartridges, bulbs, batteries, all As-Is items, missing accessories not stated in our ad as pictured, any and all compatibility issues, etc. Compatibility issues are not considered DOA. Cash is only accepted for will-calls (in-person). The item “SolarEdge SE7600A 500Vdc 8350W 264Vac Single Phase Inverter with DC Safety Switch” is in sale since Friday, November 8, 2019. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “svcstore” and is located in Milpitas, California. This item can be shipped to United States.

Brand: SolarEdge
MPN: SE7600A-US