1000W Solar Grid Tie Inverter with Limiter Sensor Pure Sine Wave MPPT DC26-60V. 2000W MPPT Solar Grid Tie Inverter Power Limiter DC45-90V to AC220V 50/60HZ Auto. 1000VA 12V Solar Hybrid Inverter Pure Sine Wave MPPT40A Max PV 600W/150VDC Input. 1600W 12V Solar Hybrid Inverter AC230V Pure Sine Wave MPPT 80A Max PV 400VDC In. 3000W Solar Hybrid Inverter DC24V to AC230V Pure Sine Wave MPPT 80A Max PV 3000W. 2200W Solar Hybrid Inverter DC12V to AC230V MPPT 80A Charger Max PV 2000W Input. 3200VA 24V Solar Hybrid Inverter Pure Sine Wave MPPT 80A Charger DC55-450V Input. 4.2KW 24V Solar Hybrid Inverter AC220V Pure Sine Wave MPPT 120A Two Load Output. 6.2KW 48V Solar Hybrid Inverter Pure Sine Wave MPPT120A Max PV Power 6500W Input. 10.2KW 48V Solar Hybrid Inverter Off-Grid Pure Sine Wave 230VAC MPPT 160A Charge. 3600W 24V Solar Hybrid Inverter Pure Sine Wave MPPT120A Max PV Power 4200W Input. 5000W 48V Solar Hybrid Inverter AC120V Pure Sine Wave MPPT 80A Max PV DC120-500V. 10KW Hybrid Inverter 120V/240V Single-Phase/Phase-Split Pure Sine Wave MPPT 200A. 140A Solar Charge Controller 48V Battery Regulator High Voltage PV 90-500V Input. 10200W Solar Hybrid Inverter DC48V to AC240V Off Grid Pure Sine Wave MPPT 160A. 3.6KW Solar Hybird Inverter DC24V to AC110V On/Off Grid Pure Sine Wave MPPT 120A. 600W Grid Tie Inverter DC30-55V for 30V/36V Solar Panel Pure Sine Wave Inverter. 600W MPPT Grid Tie Inverter DC16-28V to AC110V for 12V Solar Panel/24V Battery. 1000W Grid Tie Inverter MPPT DC16-28V to AC110V Solar Pure Sine Wave Inverter. 1000W Grid Tie Inverter Stackable MPPT DC30-45V to AC110V Pure Sine Wave Inverte. 1300W Grid Tie Inverter DC30-46V to AC110V Solar Pure Sine Wave Micro Inverter. 60A MPPT Solar Charge Controller for 12V to 96V Battery Max. PV 230VDC Dual Fans. 100A MPPT Solar Charge Controller for 12V to 96V Battery Max. 120A MPPT Solar Charge Controller for 12V to 96V Battery Max. 60A 80A 100A MPPT Solar Charge Controller 12/24/36/48V Auto PV Battery Regulator. 60A 80A 100A MPPT Solar Charge Controller Battery Intelligent Regulator Max 100V. MPPT 40A 60A Solar Charge Controller for 12V/24V/48V Battery Max PV 150VDC Input. MPPT 60A Solar Charge Controller 12V/24V/48V Battery Max PV 2800W/160VDC Input. 60A LCD Solar Charge Controller for 12V-48V Battery Bank Max PV 100VDC Input. 30A 12V 24V MPPT Solar Charge Controller Battery Regulator LCD APP Communication. 40A 60A 100A MPPT Solar Charge Controller Battery Regulator Dual USB/Load Output. 700W Solar Microinverter MPPT Grid Tie Inverter DC18-50V for 36V PV Panel AC110V. 180W Solar Grid Tie Microinverter DC16-26V for 12V PV Panel MPPT Pure Sine Wave. 500W 700W Grid Tie Microinverter Pure Sine Wave MPPT DC38-46V for 36V PV Panel. 1000W Solar Grid Tie Inverter MPPT DC26-60V AC110V Pure Sine Wave w/Power Limiter. 2024 New feature: With working time setting, users can use the battery to cut the peak and fill the valley function. Grid Tie Inverter DC Input 22-60V(Starting Voltage 26V). Grid Tie Inverter with Limiter Sensor. Delivers only the power needed by the load. Voc (solar panel) must not exceed 60V / 90V to ensure good output efficiency. Battery discharge power mode, Can auto regulate depth of discharge of the battery bank. Micro Inverter Max Power Point Tracking and AC Stackable, Anti-island protection. Intelligent LCD display various parameters. 1000W Grid Tie Inverter converts DC power produced by Solar Panels to AC, connects to the grid and feed all of the power available from the panels to the AC load. Smart Micro inverter is synchronized and in-phase with the utility grid. The electric apparatus in the house will use power from the inverter first. If the Solar Panel is producing less power and the GTI cannot deliver all the power needed by the load, then power will be supplemented by the Grid. Why we produced the GRID TIE INVERTER WITH LIMITER? It is in response to the overwhelming clamor from our customers for a product that can control the amount of power that the grid tie inverters (GTI) can generate so that the amount of excess power produced by the solar panels are reduced to insignificant levels, if not eliminated — because in some countries, the producer pays for the excess power it gives to the distribution grid. This is because the electric power meters (the one provided by the electricity provider in the area) are not aware of the direction of power flow. In other words it only adds even if power is exported to the grid, thus, the consumers will be charged for power even if it is given to the grid, and this is the problem. This is the 2nd generation grid tie inverter with limiter. But in case customer install inverter far away from the main circuit breaker, we also enable the 2nd GTIL work with stand-alone limiter, we call this-external limiter. For sure, the inverter can work under normal Grid tie-no limit mode, just set on the nice LCD and save your setting. The 22-60V model inverter will start up at 26V, after starting, the inverter can work in 22V-60V. Solar Panel Voc cannot be higher than 60V. Vmp 30v-48v Solar panels connected in Parallel suggested, for example : 4 pcs 200-260w (Vmp 31v solar panels in parallel). Rated Power (Peak/Continuous): 1000W / 900W DC Input Voltage: 22V60V Peak Power Tracking Voltage: 2654V AC Output Voltage Range:110/220V Auto Grid Tie Power Inverter starting voltage 26V AC Output Frequency Range: 46Hz65Hz Stackable: Just for AC Output Output Wareform: Pure sine wave. Stackable connection:The purpose is let small power inverter become high-power inverter. Installation of GTIL With Internal Limiter. How to use the Power Limit function? Connects/clamps to one hot wire after the Main Circuit Breaker. Converts the magnetic field created by the flow of current in the wire into small AC voltage and current which is proportional to the power that passes through the wire. This installation is not require an additional limiter module, Installation is much easier. Clamp the current sensor cable to one of the hot wire to measure the current, the internal limiter will auto detect the load power and control the inverter output power, excess power will be well controlled. Limiter Setting on the LCD of the inverter. The GTIL include three working mode:Work as normal GTI without power limitation. Work under Internal limiter mode and Work under External limiter mode, Pls make your setting on the LCD and save it, details setting operation, pls read the GTI manual. Bat or solar limited current mode. This function is usable while using with battery. The setted voltage will be the cut off voltage, this means while battery discharged to the setted voltage point or below setted point, inverter will auto disconnect from the battery and stop operating. This can prevent the battery from over discharged. The setted current means inverter will discharge the battery at this current level. MPPT function of the inverter will auto invalid when working under this setting. Set is 0.1V/step. Set is 0.1V/Step. 1 x On Grid Inverter with Limiter(built-in) 1 x AC cable 1 x Internal type Limiter clamp with sensor & 2m cable 1 x English User Manual. Y&H machine certification, safer and more compliant. If it exceeds one year, we still provide after-sales service, but the after-sales parts need to be paid for by ourselves. We will reply to your message within 24 hours. You have requested a return, and we will provide you with a free return.