1200W Durable Inverter Solar Inverter Grid Tie Monitoring Fittings Inverte

1200W Durable Inverter Solar Inverter Grid Tie Monitoring Fittings Inverte. Plug Type: US Standard. Maximum Input DC Voltage: 54V. Peak Power Tracking Voltage: 22-45V. Operating Voltage Range: 17-50V. Min/Max Start-up Voltage: 22-50VDC. Maximum DC Short Circuit Current: 80A. Maximum Input Operating Current: 54.4A. Peak Power Output: 1200watt. Rated Output Power: 1150watt. Rated Output Current: 9.58A. Rated Voltage Range: 80-160VAC. Rated Frequency Range: 57-62.5Hz. Max Unit Per Branch Circut: 3pcs(Single-phase). Static MPPT Efficiency: 99.5%. Maximum Output Efficiency: 91.2%. Night Time Power Loss. Communication Mode: Power Line Carrier. Power Transmission Mode: Reverse Transmission, Load Priority. Gross Weight: 4.08kg/8.99lbs. Net Weight: 2.88kg/6.35lbs. Product Size: 2137.44cm/8.2714.721.57inch. Package Size: 47.53411.5cm/18.713.394.53inch. Can efficiently turn the direct current generated by solar panels into the alternating current used by household appliances. This micro inverter makes it easier. Made of fine aluminum alloy, this. Inverter has a wide range of functions, good safety, convenient installation, and high-cost performance. We believe this inverter will not disappoint you. The inverter is made of aluminum alloy, which is durable. And not easy to rust. You can use it for a long time without frequent replacement, and your cost can be saved. The inverter has built-in high-precision maximum power point tracking, which can optimize the power collection from the solar panel, accurately capture and lock the maximum output power point, and greatly increase power generation to more than 25%. In addition, the efficient power reverse transmission technology can transmit the power that can not be used up to the grid in the reverse direction to other places for use, and the power transmission rate can reach 99.9%. The inverter is equipped with an LCD display screen to monitor voltage, power, frequency, current, etc. So you can see the machine clearly in operation. The inverter adopts intelligent soft switching technology, high-frequency switching power supply technology, and 32-bit DSP full digital SPWM control technology, making the product strong. Ability, fast operation speed, high intelligence, and a powerful functional system, which can meet the needs of users. The output and input of the system are completely electrically isolated, the insulation performance of the entire power distribution system is good, and the fully isolated booster circuit is safer and more reliable. The inverter has six protection functions: over-temperature protection, under-voltage alarm, under-voltage protection, over-voltage protection, short circuit protection, overload protection, etc. Design can prevent rain from eroding its surface, so. You can use it with confidence. After the installation of the power station, you don’t need to do maintenance work. After a long time, you only need to remove the dust on the photovoltaic panel. With a size of. 8.2714.721.57inch. The inverter adopts high-frequency telephone, micro processing, and other technologies, so it is smaller, lighter, and won’t occupy too much space. During installation, you can stack multiple inverters at will, form a single-phase parallel stacking system, or conveniently form a three-phase system to provide a three-phase AC. We have been working hard to provide better service and quality for our customers, which is our goal. If there is any quality problem with our inverters. The inverter is equipped with two gaskets to help you install the photovoltaic support, making the inverter more stable. The inverter is provided with heat dissipation holes, which can play a good role in heat dissipation and prolong the service life of the inverter. This product is applicable to 30V or 36V solar panels, 36V batteries. The inverter can be widely used in residential or commercial areas for. Turning the direct current generated by solar panels into alternating current. Step 1: Install the inverter on the support of the photovoltaic panel with the screws provided by the machine. Step 2: Connect the positive and negative poles of the DC connection plug on the photovoltaic panel to the DC input terminal of the inverter. Step 3: Open the waterproof cover of the AC output interface of the inverter and connect the AC cable to the AC waterproof plug. Step 4: Connect the AC output cable to the AC main cable. Step 5: Repeat steps 1 to 3 to install and connect all inverters. Step 6: Connect the AC main cable to the public grid and start your green energy journey. Other Accessories for Installation. Please install the inverter correctly according to the instructions. If you have any questions, please contact the relevant personnel. Please don’t dismantle the machine. Only qualified maintenance personnel can repair the inverter. Please install the inverter in a place with low humidity and good ventilation to avoid overheating the inverter and remove the surrounding inflammable and explosives. When using this inverter, please take good care of your children to prevent them from touching and playing to avoid electric shock. Please note that our products are grid-connected, the AC output port has to be connected to the home grid in order to achieve grid-connected power generation. When the input load is with solar panels, it is important that the VOC voltage is between 30-48V. We recommend that the solar panel is configured for 20% more power than the power of the product. For example, if the product is 600W, the total power of the solar panels should be between 700-750W. When the input load is a battery, we recommend a battery voltage of 36V, which can be connected in series with 3 12V batteries. Please note that the positive and negative polarity should not be reversed when connecting the product. The recommended battery current is 36V/10mah for 300W, 36V/20mah for 600W, and 36V/40-45mah for 1200W. The input and output voltage of the configuration is within the normal operating voltage range of the product in order for the product to work properly and achieve grid-connected power generation. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement. Please make sure you do not mind before you order. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. MPPT (Maximum Power Point Tracking). Maximum Input DC Voltage. Peak Power Tracking Voltage. Maximum DC Short Circuit Current. Maximum Input Operating Current. Max Unit Per Branch Circut. Reverse Transmission, Load Priority. 2137.44cm/8.2714.721.57inch. 47.53411.5cm/18.713.394.53inch. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “nanhaipuruite-7″ and is located in this country: US. This item can be shipped to United States.

Brand: Unbranded
Application: Home/Garden
Resistance Properties: Waterproof
Country/Region of Manufacture: Unknown
Current Type: DC
System Configuration: Grid-Tie
Power Source: Solar
Charging Mode: MPPT (Maximum Power Point Tracking)
Type: Charger/Inverter
Model: WVC-1200W
Color: Blue
Material: Aluminium Alloy
Power: 1200W
Voltage: 110V
Plug Type: US Standard
Maximum Input DC Voltage: 54V
Peak Power Tracking Voltage: 22-45V
Operating Voltage Range: 17-50V
Min/Max Start-up Voltage: 22-50VDC
Maximum DC Short Circuit Current: 80A
Maximum Input Operating Current: 54.4A
Peak Power Output: 1200watt
Rated Output Power: 1150watt
Rated Output Current: 9.58A
Rated Voltage Range: 80-160V AC
Rated Frequency Range: 57-62.5Hz
Power Factor: ＞99％
Max Unit Per Branch Circut: 3pcs(Single-phase)
Static MPPT Efficiency: 99.5%
Maximum Output Efficiency: 91.2%
Night Time Power Loss: <1W
Total Flow Distortion: <5%
Ambient Temperature Range: ﹣40℃~60℃/﹣40℉~140℉
Waterproof Rating: IP65
Cooling Method: Self-cooling
Communication Mode: Power Line Carrier
Power Transmission Mode: Reverse Transmission, Load Priority
Gross Weight: 4.08kg/8.99lbs
Net Weight: 2.88kg/6.35lbs
Product Size: 21*37.4*4cm/8.27*14.72*1.57inch
Package Size: 47.5*34*11.5cm/18.7*13.39*4.53inch

Category: 1200w | Comments Off

December 16

Solar Grid Tie Inverter 6000W 2 Independent Durable MPPT Limiter WIFI Monitor

Solar Grid Tie Inverter 6000W 2 Independent Durable MPPT Limiter WIFI Monitor. (2 MPPT separate and independent). The inverter with CT Limiter realizes the function of zero export output to the grid, and can directly supply power to the load. Plug and play, powered by inverter, no external power needed, easy to install. External design, easier to replace faulty equipment. Water-proof design, resistant to bad weather, enhance stability. Independent from inverter to protect parts inside inverter, eliminate potential problems. End user can monitor yields at any time with SOLARMAN APP. There may be some delays due to flight, holiday, weather, local post, local natural disaster impact. It must also be in the original packaging. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “rodonite-7″ and is located in this country: CN. This item can be shipped worldwide.

Color: MG6KTL-2M
Input Voltage: 120V-550VDC
Output Voltage: 230VAC 50HZ60HZ
Socket Type: With WIFI-CT
Size: 360*460*150MM
Current Rating: Other
Inverter Technology: Microinverter
Model: 8231093027
Country/Region of Manufacture: China
Custom Bundle: No
Current Type: AC/DC
System Configuration: Grid-Tie
Material: Other
Power Source: Solar
Type: DC/AC Inverters
Features: Durable
MPN: 8231093055
Recommended Environment: Indoor/Outdoor
Item Length: Standard
Power: 6000W
Current Output: Other
Brand: Unbranded
Application: Camping/Hiking, Home/Garden
Charging Mode: MPPT (Maximum Power Point Tracking)
Is_customized: Yes
Output Frequency: 50HZ60HZ
Output Power: 1 – 200KW
Output Type: Single
Weight: 21KG
Resistance Properties: Other
Voltage: 120-550VDC to 230VAC

Category: solar | Comments Off

December 4

1x Grid Tie Durable Inverter Inverter Solar Inverter IP65 Waterproof Control

1x Grid Tie Durable Inverter Inverter Solar Inverter IP65 Waterproof Control. Safe to use: The inverter can control each component independently of each other, minimising potential safety risks and preventing accidents. The inverter can be installed directly behind the module or on a bracket to simplify user maintenance. WiFi / app control: the inverter solar grid tie can be operated and monitored via WiFi or mobile app, which can significantly improve overall efficiency. High accuracy: can be operated and monitored via WiFi or mobile app, which is convenient to use and significantly improves overall work efficiency. The solar inverter has a high-precision instrument built-in, you can see the working status of each component, which is efficient and durable Single-phase output, Flexible 3-phase PV systems Integrated AC bus cable, Ready-To-Use Low cost, Easy installation Isolated Island Protection, Voltage Protection, Frequency Protection, Temperature Protection, Current Protection, etc. Matters needing attention. Use photovoltaic panel(s) ONLY connect to this equipment. This equipment is ON-GRID Microinverter, To make it work properly, it must be connected to the power grid correctly, and the power grid is working properly, When the power grid stopped working, it will also stop generating. Do NOT exceed PV panel(s) voltage over the inverter max input voltage. Do NOT exceed PV panel(s) power over the inverter max input power. DC voltage sources are pass through this equipment. Each circuit must be individually disconnected before servicing. Do NOT cover other items on this equipment. Do NOT remove the lid. Servicing must be performed by qualified service personnel. When PV array is exposed to light, it supples DC voltage to this equipment. Install away from direct sunlight and direct rain exposure. Please kindly note that. Also, the each additional item means. The the same color and size. Transit time may be a little delayed because of the. If you have any questions. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “2009shoppingmall” and is located in this country: CN. This item can be shipped worldwide.

Styles: 1000W
Brand: Unbranded
Type: Micro inverter
Package Contents: 1*Micro inverter 1*set screws and nuts 1*User Manual (English) 1*
Material: aluminum alloy
Voltage: 110-230V

Category: grid | Comments Off

November 27

1x Grid Tie Durable Inverter Inverter Solar Inverter IP65 Waterproof Control

1x Grid Tie Durable Inverter Inverter Solar Inverter IP65 Waterproof Control. Safe to use: The inverter can control each component independently of each other, minimising potential safety risks and preventing accidents. The inverter can be installed directly behind the module or on a bracket to simplify user maintenance. WiFi / app control: the inverter solar grid tie can be operated and monitored via WiFi or mobile app, which can significantly improve overall efficiency. High accuracy: can be operated and monitored via WiFi or mobile app, which is convenient to use and significantly improves overall work efficiency. The solar inverter has a high-precision instrument built-in, you can see the working status of each component, which is efficient and durable Single-phase output, Flexible 3-phase PV systems Integrated AC bus cable, Ready-To-Use Low cost, Easy installation Isolated Island Protection, Voltage Protection, Frequency Protection, Temperature Protection, Current Protection, etc. Matters needing attention. Use photovoltaic panel(s) ONLY connect to this equipment. This equipment is ON-GRID Microinverter, To make it work properly, it must be connected to the power grid correctly, and the power grid is working properly, When the power grid stopped working, it will also stop generating. Do NOT exceed PV panel(s) voltage over the inverter max input voltage. Do NOT exceed PV panel(s) power over the inverter max input power. DC voltage sources are pass through this equipment. Each circuit must be individually disconnected before servicing. Do NOT cover other items on this equipment. Do NOT remove the lid. Servicing must be performed by qualified service personnel. When PV array is exposed to light, it supples DC voltage to this equipment. Install away from direct sunlight and direct rain exposure. Also, the each additional item means exactly the the same color and size. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “dailyhome99″ and is located in this country: CN. This item can be shipped worldwide.

Styles: 400W
Brand: Unbranded
Type: Micro inverter
Package Contents: 1*Micro inverter 1*set screws and nuts 1*User Manual (English) 1*
Material: aluminum alloy
Voltage: 110-230V

Category: grid | Comments Off

October 22

On Grid Tie Inverters Limiter Sensor Wifi Durable Port App Online Monitor System

ON GRID TIE INVERTERS LIMITER SENSOR WIFI DURABLE PORT APP ONLINE MONITOR SYSTEM. ON GRID TIE INVERTERS LIMITER SENSOR. APP ONLINE MONITOR SYSTEM. There may be some delays due to flight, holiday, weather, local post, local natural disaster impact. It must also be in the original packaging. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “ginmega” and is located in this country: CN. This item can be shipped worldwide.

Colour: Wifi plug 3m sensor
Current Output: Other
System Configuration: Grid-Tie
Maximum Input Power: Other
Power Source: Solar
Inverter Technology: Microinverter
Size: Standard
Color: Black
Custom Bundle: No
Current Rating: Other
MPN: 769809654
Item Length: Standard
Brand: Unbranded
Type: Charger/Inverter
Current Type: AC/DC
Voltage: Other
Model: Other
Recommended Environment: Indoor/Outdoor
Features: Durable
Charging Mode: MPPT (Maximum Power Point Tracking)
Resistance Properties: Other
Country/Region of Manufacture: China
Application: Agriculture/Farming
Power: Other

Category: grid | Comments Off

September 14

Solar Power Inverter On-Grid 300W Pure Sine Wave 50/60HZ Tie Durable Connect

Solar Power Inverter On-Grid 300W Pure Sine Wave 50/60HZ Tie Durable Connect. If you order this type inverter, please Choose the right voltage (about input voltage, output voltage, output frequency). Input voltage:10.5~28VDC. Output frequency: 50Hz or 60Hz (optional). Generates pure Sine Wave. Low distortion output on all ranges. Allow different Power factor from loads. Compact and light weight design. Maximum Power Point Tracking (MPPT) – optimize power output. Plug and Play Design, simply plug into an outlet (GFI), no hard-wiring. Stackable (connect in parallel for higher output). Aluminum enclosure will act as heat sink to help dissipate heat. Simple and safe installation. Island protection: Inverter will shut down during black outs. Grid-Tied – sell green power directly back to the grid at a premium rate. (depends on your location). 18.7 x 12.6 x 5.1 cm. Inner box: 27×19.3 x 9.5. Outer box: 49×28.5x 41.5. Inner box: 30×20.3×11.3. Outer box: 42×31.5×36.5. Inner box: 39 x 20.3 x 11.3. Input voltage range: 10.5V to 28V. Solar Panel: recommend the use of power greater than 30W, the standard voltage 17.5V PV panels. Recommended, and even solar panels, thread will result in high input voltage inverter which exceeds the working voltage range. Wind turbine: Rated voltage 24VDC, maximum voltage 28VDC. Output 220V AC power inverter can be used in voltage: 170V – 260V, 50 Hz. Output 110V AC power inverter can be used in voltage range: 90V – 160V, 60 Hz. Low-voltage protection (input DC voltage is less than 10.5VDC). Overvoltage protection (Input DC voltage is greater than 28.5VDC). Over-temperature protection when the chassis temperature is above 75. The temperature dropped about 2-10 minutes to restart automatically after cooling. Fault Protection (when 110VAC or 220VAC power outage or shutdown). Islanding protection: electricity disconnected, the inverter automatically shut down output. Green LED flashing: are adjusting power output, MPPT is working condition. Long bright green LED: Indicates the maximum inverter output power is in the locked state of work. Non-professionals do not disassemble, Only qualified personnel may repair this product. Please inverter installed in the low humidity and well-ventilated place to avoid the inverter. Overheating, and clear around the inflammable and explosive materials. When using this product, avoid touching children, playing, to avoid electric shock. Optimal length of the DC input line 8M or less, long cable will allow solar panels to the inverter. DC voltage drop caused by wear and tear. Connected to a power outlet to provide AC. Connected solar panels, battery or wind generators DC input DC power supply cable. Proposed wind power plant with its own charge controller and load dump. There may be some delays due to flight, holiday, weather, local post, local natural disaster impact. It must also be in the original packaging. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “audosta” and is located in this country: CN. This item can be shipped worldwide.

Size: 18.7 x 12.6 x 5.1 cm
Recommend use solar panels: 420W
Current Rating: Other
Inverter Technology: Microinverter
Model: 8546946958
Country/Region of Manufacture: China
Custom Bundle: No
Current Type: AC/DC
System Configuration: Grid-Tie
Material: Other
Maximum Input Voltage: Other
Power Source: Solar
Type: DC/AC Inverters
Features: Durable
Color: Multicolor
MPN: 8546946997
Recommended Environment: Indoor/Outdoor
Item Length: Standard
Power: 300W
Current Output: 20A
Brand: Unbranded
Application: Agriculture/Farming, Camping/Hiking, Home/Garden
Charging Mode: MPPT (Maximum Power Point Tracking)
Max.input current: 20A
Resistance Properties: Other
Max.Output Power Factor: 99%
Output Frequency: 50/60HZ, 50HZ-60HZ
Output Power: 301 – 400W
Output Type: Single
Voltage: DC 10.5-28V AC110V

Category: solar | Comments Off

August 24

Solar Grid Tie Inverter 600W MPPT Adjustable Battery Durable Discharge Power

Solar Grid Tie Inverter 600w Mppt Adjustable Battery Durable Discharge Power. PV open voltage range. PV MAX input power(W). MPPT Voltage range(V). Suitable for Battery voltage(V). Battery Low Voltage Protection(V). PV mode AC MAX output (W). Battery mode Max output power. 220VAC(190-260VAC) or 120VAC(90-135VAC). 50Hz(4852) or 60Hz(5862). Stable real efficiency / 120V. Stable real efficiency / 220V. Islanding; Short-circuit; Low Voltage; Over Voltage; Over temperature Protection. Monocrystalline, polycrystalline, thin-film solar panels. 22.2×16.2×6.5CM. PV grid-connected inverter operating mode. The grid-tied inverter has an automated working order, without needing to monitor. On detection the power output from solar panels, device will decide if the power was large enough to begin the conversion process. Conversation process includes 5 modes, Startup, Grid-tied begin, Standby, Stop, Fault-find. Startup – When the start button is on, solar panel and grid lines both connected in normal condition, inverter enters working condition. Grid-tied begin – Grid-tied begin mode is when inverter starts to convert the Direct Current fed through from PV solar panel to a stable Alternate Current and flow to the utility grid. To enable the maximum output of energy, the device uses MPPT control technology to track sun rays, this technology promises the maximum efficiency under different daylight and temperature conditions. Standby – Standby mode is when device detects insufficient power feeding through from the solar panel, or device detects abnormal status such as voltages, frequencies, and temperatures not in the permitted range, the device enters standby mode. Stop – Insufficient sunlight hence insufficient PV power feeding through to the device and device enters into the standby mode, when this condition continues and DC voltages falls below 12V for over 1 minute, the device will enter Stop mode. When error ocurs, fault find indicator starts flashing, device will enter Stop mode. Please see 3.4 error status on LED indicator. (Battery) discharge and grid mode(With ADJ function models). The DC input of the system can be directly connected with the battery, Turn the knob of the inverter to the right into the battery mode, then the tracking function will be turned off, the output power will be adjusted from left to right, At this point the output power can be adjusted from 80W-450W or so arbitrary output to ensure that the inverter can work for a long time in the grid status. When the inverter connected to the battery discharge, if the battery voltage is too low, the inverter will automatically stop and cut off grid output to protect the battery over discharge to extend battery life. Different specifications of the input voltage of the inverter will be used with different voltage battery, the battery voltage protection point please refer to the following. Battery Low voltage protection. Battery high voltage protection. There may be some delays due to flight, holiday, weather, local post, local natural disaster impact. It must also be in the original packaging. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “audosta” and is located in this country: CN. This item can be shipped worldwide.

Input Voltage: PV 26-45V Bat 24V
Output Voltage: 220-240V
Size: 22.2×16.2×6.5CM
Current Rating: Other
Inverter Technology: Microinverter
Model: 1681797392
Country/Region of Manufacture: China
Custom Bundle: No
Current Type: AC/DC
System Configuration: Grid-Tie
Material: Other
Power Source: Solar
Type: Charger/Inverter
Features: Durable
Color: Blue
MPN: 1681797419
Recommended Environment: Indoor/Outdoor
Item Length: Standard
Power: 600W
Current Output: Other
Brand: Unbranded
Application: Agriculture/Farming
Charging Mode: MPPT (Maximum Power Point Tracking)
Weight: 2.2
Is Smart Device: No
Output Frequency: 50/60Hz
Output Power: 401 – 600KW
Output Type: Single
Resistance Properties: Other
Voltage: 24V 36V 48V 72V AC 110V / 220V

Category: solar | Comments Off

August 18

Micro Grid-Tie Inverter MPPT Input Voltage Durable DC26-46V AC120V/230V Inversor

Micro Grid-Tie Inverter MPPT Input Voltage Durable DC26-46V AC120V/230V Inversor. 300W/350W Grid Tie inverter is a compact unit, which directly converts direct current into alternating current for powering appliances and/or office equipments and connecting to utility grid. The AC output from Smart Micro inverter is synchronized and in-phase with the utility grid. Grid Tie Inversor Maximum Output Power:300W/350W/500W/600W/700W. On Grid Tie Inversor. Rated Output Power:280W/320W/480W/580W/680W. AC Output Voltage: 120V/240V. Frequency Range: 50/60HZ Auto. MPPT range: 24V – 40V. Solar Panel Voltage: Vmp30-39V; Voc38-46V. Solar Panel Power: maximum 300W/350W/500W/600W/700W. Use solar panel ONLY connect to this equipment. This equipment is ON-GRID Microinverter, To make it work properly, it must be connected to the power grid correctly, and the power grid is working properly, When the power grid stopped working, it will also stop generating. Do NOT exceed PV panel(s) voltage over the Solar Grid Tie Inverter max input voltage. Do NOT exceed PV panel(s) power over the Grid Tie solar Inverter max input power. The positive and negative poles of the solar panel cannot be reversed. If you extend the solar panel cable. You need to be careful about this problem. Install away from direct sunlight and direct rain exposure. Regarding the heating problem of the inverter. This is normal phenomenon. All electronic devices generate heat during operation. The inverter uses aluminum alloy material. Metal can conduct heat better. The inverter also has over-temperature protection if the temperature is high. Then the inverter will automatically reduce the working output efficiency. After cooling down, restart. It is recommended to install the inverter in a ventilated, dry and cool place. About inverter repair:(This is a common problem of micro-inverters). After a large amount of customer data feedback, the inverter cannot work because the DC or AC fuse is damaged. (The red light is on because the AC accessories are damaged, and if the light is off, the DC accessories are damaged)When you encounter this problem, we can send you accessories for free. And give you maintenance video instruction. You can easily replace it. The 18-50V grid tie micro inverter will start up at 24V, after starting, the Solar Microinverters can work in 18V-39V (Vmp). Solar Panel Voc cannot be higher than 50V. Why not use 12V solar panels? 12V panel working voltage Vmp18-20V, open circuit voltage Voc20-24V. The 12V panel is just a starting voltage. If the sunlight is weak, the working voltage will be lower than 18V. It is easy to make the Solar micro-inverters work unstable, and the inverter will start repeatedly. It is easy to damage the Smart Microinverter. Recommended Solar Panel Voltage: Vmp30-39V; Voc38-46V. Green light steady=Microinverter in generating. Red flash=Microinverter in waiting. Over/low AC voltage protection. Over/low DC voltage protection. Over/low AC frequency protection. 1 x AC Cable 30CM. There may be some delays due to flight, holiday, weather, local post, local natural disaster impact. It must also be in the original packaging. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “gintarelis-7″ and is located in this country: CN. This item can be shipped worldwide.

Colour: GMI-350W
Input Voltage: 18V-50VDC
Output Voltage: 180V-280VAC
System Configuration: Grid-Tie
Current Type: DC
Current Output: Other
Power Source: Other
Size: Standard
Custom Bundle: No
MPN: 654786909
Item Length: Standard
Wire Gauge: Other
Voltage: 120V/2.33A;230v/
Features: Durable
Protection Properties: Other
Maximum Input Voltage: Other
Inverter Technology: Microinverter
Color: Multicolor
Brand: Unbranded
Type: Charger/Inverter
Connector Configuration: Other
Model: Other
Recommended Environment: Indoor/Outdoor
Charging Mode: MPPT (Maximum Power Point Tracking)
Resistance Properties: Other
Country/Region of Manufacture: China
Application: Agriculture/Farming, Back-up Power
Power: 300W 350W 500W 600W 700W

Category: micro | Comments Off

August 1

Solar Panel Inverter Grid Tie 1000W 18V MPPT Function Durable Pure Sine Wave

SOLAR PANEL INVERTER GRID TIE 1000W 18V MPPT FUNCTION DURABLE PURE SINE WAVE. Noted: Please connect the AC mains power first, and then connect the DC Solar panel input. Input voltage range: 10.5V to 28V/ 22V to 50V. Solar Panel: Recommend using the power more than 30W and the standard voltage of 17.5V PV panel for GTI-1000. Recommend using the power more than 60W and the standard voltage of 35V PV panel for WV-1000. Recommend using multiple solar panels. Solar panel in series will result in high-input voltage which will exceed the working voltage range of the inverter. Voltage range of the inverter whose output is 220V AC. Voltage range of the inverter whose output is 110V AC. Directly connected to the solar panels (do not need to connect the battery). Using precise MPPT function, APL functions, the inverter automatically adjust the solar panels of maximum output power, simply connect the solar panel to the grid inverters. Do not need to connect the battery. AC 0 angle with high precision auto-detection. AC phase angle of 0 through isolation amplifier then input to the MCU for high-precision detection and analysis. The phase shift rate is less than 1%, thus achieve high-precision with phase modulation AC output together. In the process of the grid, usually adapt the same phase angle in parallel. Ie, When the two-phase alternating current total is equal to 0. Use switch to combination the two AC fusion and the product is rectified AC half-frequency AC to 100Hz first, then the machine use the high frequency current in the circuit and semi-100Hz frequency alternating current generated combination, to achieve high-frequency modulation. Pure Sine Wave Output. Use SPWM directly to make pure sine wave output. Automatic Sensing Function Solar Luminosity. Use the latest luminosity perception operation technology. The different illuminate angle and intensity of the solar panel will produce different current output. Use advanced CPU to operate the different illuminance and the data can be directly displayed on the LCD. Then you can visually see the sense of the strength of the sun unit. Power Automatically Locked (APL). In different current fluctuations, we should use the MPPT function. When the MPPT function adjusted to the maximum power point, the product automatically powers locked in maximum power point, then made the output power more stable. Maximum Power Point Tracking (MPPT). Because the current intensity and the voltage changes at any time, if there is no power point tracking, there will be a lot of problems. In the past time, usually adopt a solar controller, but this product uses high-precision MPPT operation power, automatic and immediate adjust the solar panels output power at the maximum output point, then achieve a stable output purposes. Automatically Adapt To Different Load Power Factor. Adapt to any of the power load. Constant Current, Constant Power. This product is constant current, constant output power, without any overload, over-current phenomenon. Automatically Shut Down When The Power Output Of a Fault. When the city power system is in failure, the inverter will automatically turn off the output. Current Limit Protection:Current limit. Multiple small power inverters in parallel can achieve large output power. High-Frequency High Conversion Rate:Adapt high frequency converter, the output more efficient. Red terminal: Connect DC positive, black terminal: Connect DC negative. Show in figure 1. AC socket: Connect to the mains. Put the side of the AC cord, which has holes into the inverter with 3 foot, outlet and the other side of the AC cord to home 3PIN AC outlet. Show in figure 2. Figure 2 Figures 3. Low-voltage protection (input DC voltage is less than 10.5VDC). Over-voltage protection (Input DC voltage is greater than 28.5VDC). Over-temperature protection when the chassis temperature is above 75? The temperature dropped about 2-10 minutes to restart automatically after cooling. Fault Protection (when 110VAC or 220VAC power outage or shutdown). Islanding protection: When the electric supply stop, the inverter automatically shut down output. Green LED flashing: The inverter is adjusting power output. MPPT is in working condition. Green LED long in time: The inverter is in working condition with the maximum output power. In order to achieve higher power use requirements, this product can be stacked, such as: 4-grid inverter1000W stacking can achieve 4000W. And the number of the stacking is unlimited. There may be some delays due to flight, holiday, weather, local post, local natural disaster impact. It must also be in the original packaging. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “gintarelis-7″ and is located in this country: CN. This item can be shipped worldwide.

Colour: 1000
Input Voltage: 10.5-28VDC
Output Voltage: 180-260VAC 50HZ60HZ
Current Output: 65A
System Configuration: Grid-Tie
Power Source: Solar
Inverter Technology: Microinverter
Color: Multicolor
Custom Bundle: No
Maximum Flow Rate: 0.6-1 GPM (2.3-3.8 L/min)
Material: Other
MPN: 876908789
Brand: Unbranded
Type: Charger/Inverter
Current Type: AC/DC
Voltage: DC 10.5~28V to AC 220/110V
Model: Other
Recommended Environment: Indoor/Outdoor
Features: Durable
Charging Mode: MPPT (Maximum Power Point Tracking)
Resistance Properties: Other
Country/Region of Manufacture: China
Application: Agriculture/Farming
Power: 1000W

Category: solar | Comments Off

June 11

Micro Power Inverter DC22v-60v AC110v220v Durable Pure Sine Wave Grid Tie Input

Micro Power Inverter DC22v-60v AC110v220v Durable Pure Sine Wave Grid Tie Input. There are 3 version. WVC-1400W/WVC-16000W (WIFI 433MHZ version)inverter can be compatible with wifi-modem, Note: this price is without modem, just WVC solar grid tie inverter. WVC-1400W/WVC-1600W (with 433MHZ WIFI WVC Modem)Updated type, inverter comes with the new WVC WIFI Modem, can also remote monitoring by Mobile app, better use for Large-scale solar system. The inverter is equipped with 433MHz communication function as standard, and can communicate with our data collector (optional), and the data collector only needs to be connected to a wireless router to obtain various real-time data in the power station and upload it To the cloud server. Users only need to install our power station management application on their mobile phones to easily access various data in the power station and manage the power station. The fifth generation WVC series communication products of us, adopt waterproof flow line design, which can provide better heat dissipation function for the equipment. The built-in maximum power point tracking engine (MPPT) can better capture changes in lighting, and it can work even in rainy weather. It can maximize the capture and collection of sunlight. The inverter is compatible with a variety of conventional solar panels with an open circuit voltage of 2260V, and the panel can exert its best performance through technical means. The power output mode of us Micro-Inverter is reverse transmission technology, which supplies power to the load first, and then uploads the excess power to the local power grid. Its conversion efficiency is as high as 95%. The product has multiple national invention and appearance patents, And has CE, CEC, INMETOR and other regional and national product certification. Maximum power point tracking. Internal high precision meter. No installation, no maintenance. 11.5G lot platform management. Step 1: Fix the inverter on the bracket of the photovoltaic panel with the screws attached to the machine. Step 2: Connect the positive and negative poles of the DC connection plugs on the photovoltaic panel to the DC input terminals of the inverter. Step 3: Open the waterproof cover of the AC output connector of the inverter and connect the AC cable to the AC waterproof plug. Step 4: Connect the AC output line to the AC main cable. Step 5: Repeat steps 1 to 3 to install and connect all inverters. Step 6: Connect the AC main cable to the mains grid to start your green energy journey. Note: Before installing WVC series micro-inverter products, please read this manual first and pay attention to the installation details. This manual contains important instructions that should be followed when installing and maintaining Kadant Micro-inverters. In order to reduce. When reducing the risks of electric shock and ensuring safe installation and operation, always follow the following safety symbols present in this document to indicate dangerous situations and important safety instructions. 1 x Micro Inverter. 1 x English Manual. 2 x Accessory Kit (4 x Screw, 4 x Nut, 8 x Accessory). The biggest feature of the photovoltaic grid-connected system is that the DC power generated by the photovoltaic array is converted into AC power that meets the requirements of the commercial power grid through the grid-connected inverter, and then directly connected to the commercial power grid. The power generated by the panel array in the grid-connected system is preferentially supplied to the AC At the load side, excess power is fed back to the grid. On rainy days or nights, when the photovoltaic array does not generate electrical energy or the generated electrical energy cannot meet the load demand, it is powered by the grid. Because the electric energy is directly input into the power grid, the configuration of the storage battery is eliminated, the process of storage and release of the storage battery is eliminated, and the power generated by the PV square array can be fully utilized to reduce the energy loss and reduce the cost of the system. However, a dedicated grid-connected inverter is required in the system to ensure that the output power meets the requirements of the grid power for voltage, frequency and other indicators. Because of the inverter efficiency, there will still be some energy loss. Such systems are usually able to use the mains and solar photovoltaic arrays in parallel as the source of local AC loads. Reduce the load power shortage rate of the entire system. And the grid-connected PV system can play a peak-shaving effect on the public power grid. In response to the characteristics of the grid-connected system, we has developed the first generation of micro-grid inverters as early as 2008, specifically for the recycling of electrical energy of various profit and loss. Provides a preliminary route for our product development and design direction, and overcomes a series of technical problems on the grid-connected system. Until now the fifth generation WVC series R3 version of the inverter. Installation of micro inverter. Step 1 Installation for fixed the inverter on the PV holder with the screws attached is as following. Step 2 Connect the two DC terminal of the PV to the inverter, positive to positive, negative to negative. Step 3 Open the waterproof cap on AC output side of the micro inverter, then plug to AC power line. Step 4 Plug the AC output line to main AC cable. Step 5 Repeat the first step to the third step to complete the installation of micro inverters. Step 6 Finally, please connect the AC main cable to the utility grid to run renewable energy. There may be some delays due to flight, holiday, weather, local post, local natural disaster impact. It must also be in the original packaging. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “gintarelis-7″ and is located in this country: CN. This item can be shipped worldwide.

Colour: WVC1600 WIFI 433MHZ
Input Voltage: 22V-60VDC
Output Voltage: 85-280VAC Auto Sense
System Configuration: Grid-Tie
Current Type: DC
Current Output: Other
Power Source: Solar
Inverter Technology: Battery-Based
Size: Standard
Color: Multicolor
Custom Bundle: No
MPN: 878564356
Material: Other
Item Length: Standard
Brand: Unbranded
Type: Charger/Inverter
Voltage: Other
Model: Other
Recommended Environment: Indoor/Outdoor
Features: Durable
Charging Mode: MPPT (Maximum Power Point Tracking)
Resistance Properties: Other
Country/Region of Manufacture: China
Application: Home/Garden
Power: 2800W/2400W/2KW/1600W/1400W

Category: micro | Comments Off

November 2024
M	T	W	T	F	S	S
« Oct
				1	2	3
4	5	6	7	8	9	10
11	12	13	14	15	16	17
18	19	20	21	22	23	24
25	26	27	28	29	30