2000W Solar Grid Tie Inverter with Power Limiter Sensor DC45-90V to AC190-260V

2000W MPPT Grid Tie Inverter with Power Limiter Stackable DC45-90V to AC190-260V. Why we produced the GRID TIE INVERTER WITH LIMITER? It is in response to the overwhelming clamor from our customers for a product that can control the amount of power that the grid tie inverters (GTI) can generate so that the amount of excess power produced by the solar panels are reduced to insignificant levels, if not eliminated — because in some countries, the producer pays for the excess power it gives to the distribution grid. This is because the electric power meters (the one provided by the electricity provider in the area) are not aware of the direction of power flow. In other words it only adds even if power is exported to the grid, thus, the consumers will be charged for power even if it is given to the grid, and this is the problem. This is the 2nd generation grid tie inverter with limiter. But in case customer install inverter far away from the main circuit breaker, we also enable the 2nd GTIL work with stand-alone limiter, we call this-external limiter. For sure, the inverter can work under normal Grid tie-no limit mode, just set on the nice LCD and save your setting. New upgraded firmware enable battery or solar limiter current and power model. User can set the maximum output power of inverter , this can make the inverter work at cooler contition as user want and extend the lifespan of the inverter. User can set kick in/off voltage of the inverter which can flexible using with battery bank depend on users mind and can prevent battery bank from over discharged. Continuous Power Output1950W Peak Power Output2000W Input DC Voltage Range45V 90V Peak power tracking voltage50V-90V AC Output Voltage Range190VAC 260VAC Output Frequency46Hz65Hz Standby Power Consumption. How to use the Inverter? Standard Grid Tie Inverter Model. More than 1 unit inverters stackable. The Grid Tie inverter converts DC power produced by Solar Panels to AC, connects to the grid and feed all of the power available from the panels to the AC load. All excess power that is not needed by the load is then exported to the Grid. If the Grid fails, then the Grid Tie Inverter will turn off. When the Grid comes back on line. The Grid Tie Inverter will again supply power to the load and any excess power is exported to the Grid again. If the Solar Panel is producing less power and the GTI cannot deliver all the power needed by the load, then power will be supplemented by the Grid. Power Meters (Except smart meter) are not aware of the direction of Power flow. The user then pays for the power exported and delivered by the Grid. Using Grid Tie Inverter With Limiter Model. The Grid Tie Inverter with Limiter delivers only the power needed by the load and prevents delivering excess power hence avoids excess power in going back to the Grid. The heart of the Grid Tie Inverter with Limiter is the Limiter Module (LM). The LM continuously sampled the power needed by the load through the current sensor connected after the Main Circuit Breaker. The LM then will process the signal. It then sends signal to Grid Tie Inverter how much power to deliver to the load in real time. The user, after installing and connecting the GTIL correctly, need not do anything and the unit will do its work automatically. Installation of GTIL With Internal Limiter. This installation is not require an additional limiter module, Installation is much easier. Clamp the current sensor cable to the hot wire to measure the current, the internal limiter will auto detect the load power and control the inverter output power, excess power will be well controlled. External protective device including dc and ac SPD(Surge protection device), dc and ac breaker, etc is recommended to installed in the system. Limiter Setting on the LCD of the inverter. The GTIL include three working mode:Work as normal GTI without power limitation. Work under Internal limiter mode and Work under External limiter mode, Pls make your setting on the LCD and save it, details setting operation, pls read the GTI manual. 5 Battery Discharge Power Mode. 6 Limiter Module Specification. Clamp sensor- Max 100A. Clamp sensor signal- 5v AC max mA. DC signal Cable- 5v DC, max mA. 1 x Solar Grid Inverter with Limiter 1 x Internal type Limiter clamp with sensor & 2m cable 1 x English User Manual. Sellers are not responsible for service transit time. Transit times are provided by the carrier, exclude weekends and holidays, and may vary with package origin and destination, particularly during peak periods. (Only for Business Express). Feedback is very important to us. Please do not give us any bad feedback. If you can do as we say, we will be very grateful. Please give us the opportunity to resolve any problem. The item “2000W Solar Grid Tie Inverter with Power Limiter Sensor DC45-90V to AC190-260V” is in sale since Friday, August 14, 2020. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “eprec-us” and is located in shenzhen. This item can be shipped worldwide.

Output Wave Form: Pure Sine Wave
MPPT Function: Yes
Stackable: Yes
Model: Grid Tie Inverter with Power Limiter
Color: Blue
MPN: Does not apply
Recommended Environment: Indoor
Brand: Y&H
Application: Home/Garden
Inverter Technology: Microinverter
Country/Region of Manufacture: China
System Configuration: Grid-Tie
Power Source: Solar
Power: 2000W
Charging Mode: MPPT (Maximum Power Point Tracking)
Continuous Power Output: 1950W
Peak Power Output: 2000W
Input DC Voltage Range: 45V ~ 90V
AC Output Voltage Range: 190VAC ~ 260VAC
Voltage: DC45-90V
Output Frequency: 46Hz~65Hz

Category: 2000w | Comments Off

August 31

2000W Grid Tie Inverter with Limiter Sensor MPPT Stackable DC45-90V to AC190-260

2000W Grid Tie Inverter with Limiter Sensor MPPT Stackable DC45-90V to AC190-260V. The grid tie power inverter is the most efficiency and technologically advanced inverter for solar power system. Low cost and easy installation–it can make full use of all types of buildings surface that face to the sun in the city as well as fast and easy installation of solar modules and grid tie inverter. Big LCD display, all adjustable parameter. Free combination — it can be used as a separate grid tie system and can be setup as a large solar array with many of them. Improving the efficiency of the entire solar power system– Because of MPPT function. So every panel is working at the maximum. Low power consumption, over current protection, over temperature protection, reverse polarity protection, etc. Why we produced the GRID TIE INVERTER WITH LIMITER? It is in response to the overwhelming clamor from our customers for a product that can control the amount of power that the grid tie inverters (GTI) can generate so that the amount of excess power produced by the solar panels are reduced to insignificant levels, if not eliminated — because in some countries, the producer pays for the excess power it gives to the distribution grid. This is because the electric power meters (the one provided by the electricity provider in the area) are not aware of the direction of power flow. In other words it only adds even if power is exported to the grid, thus, the consumers will be charged for power even if it is given to the grid, and this is the problem. This is the 2nd generation grid tie inverter with limiter. But in case customer install inverter far away from the main circuit breaker, we also enable the 2nd GTIL work with stand-alone limiter, we call this-external limiter. For sure, the inverter can work under normal Grid tie-no limit mode, just set on the nice LCD and save your setting. New upgraded firmware enable battery or solar limiter current and power model. User can set the maximum output power of inverter , this can make the inverter work at cooler contition as user want and extend the lifespan of the inverter. User can set kick in/off voltage of the inverter which can flexible using with battery bank depend on users mind and can prevent battery bank from over discharged. Continuous Power Output1950W Peak Power Output2000W Input DC Voltage Range45V 90V Peak power tracking voltage50V-90V AC Output Voltage Range190VAC 260VAC Output Frequency46Hz65Hz Standby Power Consumption. A: DC input , for solar panels connection. B: Connector for external limiter. C: Connector for internal limiter. D: AC output , use AC cable to connect to home grid. How to use the Inverter? Standard Grid Tie Inverter Model. More than 1 unit inverters stackable. The Grid Tie inverter converts DC power produced by Solar Panels to AC, connects to the grid and feed all of the power available from the panels to the AC load. All excess power that is not needed by the load is then exported to the Grid. If the Grid fails, then the Grid Tie Inverter will turn off. When the Grid comes back on line. The Grid Tie Inverter will again supply power to the load and any excess power is exported to the Grid again. If the Solar Panel is producing less power and the GTI cannot deliver all the power needed by the load, then power will be supplemented by the Grid. Power Meters (Except smart meter) are not aware of the direction of Power flow. The user then pays for the power exported and delivered by the Grid. Using Grid Tie Inverter With Limiter Model. The Grid Tie Inverter with Limiter delivers only the power needed by the load and prevents delivering excess power hence avoids excess power in going back to the Grid. The heart of the Grid Tie Inverter with Limiter is the Limiter Module (LM). The LM continuously sampled the power needed by the load through the current sensor connected after the Main Circuit Breaker. The LM then will process the signal. It then sends signal to Grid Tie Inverter how much power to deliver to the load in real time. The user, after installing and connecting the GTIL correctly, need not do anything and the unit will do its work automatically. Installation of GTIL With Internal Limiter. This installation is not require an additional limiter module, Installation is much easier. Clamp the current sensor cable to the hot wire to measure the current, the internal limiter will auto detect the load power and control the inverter output power, excess power will be well controlled. External protective device including dc and ac SPD(Surge protection device), dc and ac breaker, etc is recommended to installed in the system. Limiter Setting on the LCD of the inverter. The GTIL include three working mode:Work as normal GTI without power limitation. Work under Internal limiter mode and Work under External limiter mode, Pls make your setting on the LCD and save it, details setting operation, pls read the GTI manual. 5 Battery Discharge Power Mode. 6 Limiter Module Specification. Clamp sensor- Max 100A. Clamp sensor signal- 5v AC max mA. DC signal Cable- 5v DC, max mA. 1 x Solar Grid Inverter with Limiter 1 x AC cable 1 x Internal type Limiter clamp with sensor & 2m cable 1 x English User Manual. Sellers are not responsible for service transit time. Transit times are provided by the carrier, exclude weekends and holidays, and may vary with package origin and destination, particularly during peak periods. (Only for Business Express). Feedback is very important to us. Please do not give us any bad feedback. If you can do as we say, we will be very grateful. Please give us the opportunity to resolve any problem. The item “2000W Grid Tie Inverter with Limiter Sensor MPPT Stackable DC45-90V to AC190-260″ is in sale since Monday, July 20, 2020. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “maihuiyan” and is located in shenzhen. This item can be shipped worldwide.

Model: 2000W Grid Tie Inverter with Limiter Sensor
Color: Blue
MPN: Does Not Apply
Recommended Environment: Indoor
Brand: Y&H
Application: Home/Garden
Inverter Technology: Microinverter
Country/Region of Manufacture: China
System Configuration: Grid-Tie
Power Source: Solar
MPPT Function: Yes
Stackable: Yes
Input DC Voltage Range: 45V ~ 90V
Peak power tracking voltage: 50V-90V
AC Output Voltage Range: 190VAC ~ 260VAC
Output Frequency: 46Hz~65Hz
Output Wave Form: Pure Sine Wave
Power: 2000W
Voltage: DC45-90V

Category: 2000w | Comments Off

August 25

2000W Grid Tie Inverter with Power Limiter MPPT Stackable DC45-90V to AC190-260V

2000W Grid Tie Inverter with Power Limiter MPPT Stackable DC45-90V to AC190-260V. Why we produced the GRID TIE INVERTER WITH LIMITER? It is in response to the overwhelming clamor from our customers for a product that can control the amount of power that the grid tie inverters (GTI) can generate so that the amount of excess power produced by the solar panels are reduced to insignificant levels, if not eliminated — because in some countries, the producer pays for the excess power it gives to the distribution grid. This is because the electric power meters (the one provided by the electricity provider in the area) are not aware of the direction of power flow. In other words it only adds even if power is exported to the grid, thus, the consumers will be charged for power even if it is given to the grid, and this is the problem. This is the 2nd generation grid tie inverter with limiter. But in case customer install inverter far away from the main circuit breaker, we also enable the 2nd GTIL work with stand-alone limiter, we call this-external limiter. For sure, the inverter can work under normal Grid tie-no limit mode, just set on the nice LCD and save your setting. New upgraded firmware enable battery or solar limiter current and power model. User can set the maximum output power of inverter , this can make the inverter work at cooler contition as user want and extend the lifespan of the inverter. User can set kick in/off voltage of the inverter which can flexible using with battery bank depend on users mind and can prevent battery bank from over discharged. Continuous Power Output1950W Peak Power Output2000W Input DC Voltage Range45V 90V Peak power tracking voltage50V-90V AC Output Voltage Range190VAC 260VAC Output Frequency46Hz65Hz Standby Power Consumption. How to use the Inverter? Standard Grid Tie Inverter Model. More than 1 unit inverters stackable. The Grid Tie inverter converts DC power produced by Solar Panels to AC, connects to the grid and feed all of the power available from the panels to the AC load. All excess power that is not needed by the load is then exported to the Grid. If the Grid fails, then the Grid Tie Inverter will turn off. When the Grid comes back on line. The Grid Tie Inverter will again supply power to the load and any excess power is exported to the Grid again. If the Solar Panel is producing less power and the GTI cannot deliver all the power needed by the load, then power will be supplemented by the Grid. Power Meters (Except smart meter) are not aware of the direction of Power flow. The user then pays for the power exported and delivered by the Grid. Using Grid Tie Inverter With Limiter Model. The Grid Tie Inverter with Limiter delivers only the power needed by the load and prevents delivering excess power hence avoids excess power in going back to the Grid. The heart of the Grid Tie Inverter with Limiter is the Limiter Module (LM). The LM continuously sampled the power needed by the load through the current sensor connected after the Main Circuit Breaker. The LM then will process the signal. It then sends signal to Grid Tie Inverter how much power to deliver to the load in real time. The user, after installing and connecting the GTIL correctly, need not do anything and the unit will do its work automatically. Installation of GTIL With Internal Limiter. This installation is not require an additional limiter module, Installation is much easier. Clamp the current sensor cable to the hot wire to measure the current, the internal limiter will auto detect the load power and control the inverter output power, excess power will be well controlled. External protective device including dc and ac SPD(Surge protection device), dc and ac breaker, etc is recommended to installed in the system. Limiter Setting on the LCD of the inverter. The GTIL include three working mode:Work as normal GTI without power limitation. Work under Internal limiter mode and Work under External limiter mode, Pls make your setting on the LCD and save it, details setting operation, pls read the GTI manual. 5 Battery Discharge Power Mode. 6 Limiter Module Specification. Clamp sensor- Max 100A. Clamp sensor signal- 5v AC max mA. DC signal Cable- 5v DC, max mA. 1 x Solar Grid Inverter with Limiter 1 x Internal type Limiter clamp with sensor & 2m cable 1 x English User Manual. Sellers are not responsible for service transit time. Transit times are provided by the carrier, exclude weekends and holidays, and may vary with package origin and destination, particularly during peak periods. (Only for Business Express). Feedback is very important to us. Please do not give us any bad feedback. If you can do as we say, we will be very grateful. Please give us the opportunity to resolve any problem. The item “2000W Grid Tie Inverter with Power Limiter MPPT Stackable DC45-90V to AC190-260V” is in sale since Friday, July 24, 2020. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “solarlive03yh” and is located in shenzhen. This item can be shipped to United States, all countries in Europe, all countries in continental Asia, Canada, Mexico, Australia.

Model: 2000W Limiter Grid Tie Inverter
Output Frequency: 46Hz~65Hz
Output Wave Form: Pure Sine Wave
MPPT Function: Yes
Color: Blue
MPN: Does not apply
Brand: Y&H
Country/Region of Manufacture: China
Wattage: 2000W
System Configuration: Grid-Tie
Stackable: Yes
Continuous Power Output: 1950W
Peak Power Output: 2000W
Input DC Voltage Range: 45V ~ 90V
Peak power tracking voltage: 50V-90V
AC Output Voltage Range: 190VAC ~ 260VAC
Voltage: DC45-90V

Category: 2000w | Comments Off

July 28

2000W MPPT Grid Tie Inverter with Power Limiter Stackable DC45-90V to AC190-260V

2000W MPPT Grid Tie Inverter with Power Limiter Stackable DC45-90V to AC190-260V. Why we produced the GRID TIE INVERTER WITH LIMITER? It is in response to the overwhelming clamor from our customers for a product that can control the amount of power that the grid tie inverters (GTI) can generate so that the amount of excess power produced by the solar panels are reduced to insignificant levels, if not eliminated — because in some countries, the producer pays for the excess power it gives to the distribution grid. This is because the electric power meters (the one provided by the electricity provider in the area) are not aware of the direction of power flow. In other words it only adds even if power is exported to the grid, thus, the consumers will be charged for power even if it is given to the grid, and this is the problem. This is the 2nd generation grid tie inverter with limiter. But in case customer install inverter far away from the main circuit breaker, we also enable the 2nd GTIL work with stand-alone limiter, we call this-external limiter. For sure, the inverter can work under normal Grid tie-no limit mode, just set on the nice LCD and save your setting. New upgraded firmware enable battery or solar limiter current and power model. User can set the maximum output power of inverter , this can make the inverter work at cooler contition as user want and extend the lifespan of the inverter. User can set kick in/off voltage of the inverter which can flexible using with battery bank depend on users mind and can prevent battery bank from over discharged. Continuous Power Output1950W Peak Power Output2000W Input DC Voltage Range45V 90V Peak power tracking voltage50V-90V AC Output Voltage Range190VAC 260VAC Output Frequency46Hz65Hz Standby Power Consumption. A: DC input , for solar panels connection. B: Connector for external limiter. C: Connector for internal limiter. D: AC output , use AC cable to connect to home grid. How to use the Inverter? Standard Grid Tie Inverter Model. More than 1 unit inverters stackable. The Grid Tie inverter converts DC power produced by Solar Panels to AC, connects to the grid and feed all of the power available from the panels to the AC load. All excess power that is not needed by the load is then exported to the Grid. If the Grid fails, then the Grid Tie Inverter will turn off. When the Grid comes back on line. The Grid Tie Inverter will again supply power to the load and any excess power is exported to the Grid again. If the Solar Panel is producing less power and the GTI cannot deliver all the power needed by the load, then power will be supplemented by the Grid. Power Meters (Except smart meter) are not aware of the direction of Power flow. The user then pays for the power exported and delivered by the Grid. Using Grid Tie Inverter With Limiter Model. The Grid Tie Inverter with Limiter delivers only the power needed by the load and prevents delivering excess power hence avoids excess power in going back to the Grid. The heart of the Grid Tie Inverter with Limiter is the Limiter Module (LM). The LM continuously sampled the power needed by the load through the current sensor connected after the Main Circuit Breaker. The LM then will process the signal. It then sends signal to Grid Tie Inverter how much power to deliver to the load in real time. The user, after installing and connecting the GTIL correctly, need not do anything and the unit will do its work automatically. Installation of GTIL With Internal Limiter. This installation is not require an additional limiter module, Installation is much easier. Clamp the current sensor cable to the hot wire to measure the current, the internal limiter will auto detect the load power and control the inverter output power, excess power will be well controlled. External protective device including dc and ac SPD(Surge protection device), dc and ac breaker, etc is recommended to installed in the system. Limiter Setting on the LCD of the inverter. The GTIL include three working mode:Work as normal GTI without power limitation. Work under Internal limiter mode and Work under External limiter mode, Pls make your setting on the LCD and save it, details setting operation, pls read the GTI manual. 5 Battery Discharge Power Mode. 6 Limiter Module Specification. Clamp sensor- Max 100A. Clamp sensor signal- 5v AC max mA. DC signal Cable- 5v DC, max mA. 1 x Solar Grid Inverter with Limiter 1 x AC cable 1 x Internal type Limiter clamp with sensor & 2m cable 1 x English User Manual. Sellers are not responsible for service transit time. Transit times are provided by the carrier, exclude weekends and holidays, and may vary with package origin and destination, particularly during peak periods. (Only for Business Express). Feedback is very important to us. Please do not give us any bad feedback. If you can do as we say, we will be very grateful. Please give us the opportunity to resolve any problem. The item “2000W MPPT Grid Tie Inverter with Power Limiter Stackable DC45-90V to AC190-260V” is in sale since Wednesday, July 22, 2020. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “eprec-us” and is located in shenzhen. This item can be shipped worldwide.

Type: Grid Tie Inverter with Limiter Sensor
MPN: Does not apply
Brand: Y&H
Application: Home/Garden
Inverter Technology: Microinverter
Country/Region of Manufacture: China
Wattage: 2000W
System Configuration: Grid-Tie
Power Source: Solar
MPPT Function: Yes
Stackable: Yes
Input DC Voltage Range: 45V ~ 90V
Peak power tracking voltage: 50V-90V
AC Output Voltage Range: 190VAC ~ 260VAC
Output Frequency: 46Hz~65Hz
Output Wave Form: Pure Sine Wave
Charging Mode: MPPT (Maximum Power Point Tracking)
Voltage: DC45-90V

Category: 2000w | Comments Off

January 11

1000W MPPT Solar Grid Tie Inverter with Limiter Sensor DC45-90V to AC190V-260V

1000W MPPT Solar Grid Tie Inverter with Limiter Sensor DC45-90V to AC190V-260V. Grid Tie Inverter DC Input 45-90V(Starting Voltage 49.5V). Grid Tie Inverter with Limiter Sensor. Delivers only the power needed by the load. Voc (solar panel) must not exceed 90V to ensure good output efficiency. Battery discharge power mode, Can auto regulate depth of discharge of the battery bank. Micro Inverter Max Power Point Tracking and AC Stackable, Anti-island protection. Intelligent LCD display various parameters. 1000W Grid Tie Inverter converts DC power produced by Solar Panels to AC, connects to the grid and feed all of the power available from the panels to the AC load. Smart Micro inverter is synchronized and in-phase with the utility grid. The electric apparatus in the house will use power from the inverter first. If the Solar Panel is producing less power and the GTI cannot deliver all the power needed by the load, then power will be supplemented by the Grid. Why we produced the GRID TIE INVERTER WITH LIMITER? It is in response to the overwhelming clamor from our customers for a product that can control the amount of power that the grid tie inverters (GTI) can generate so that the amount of excess power produced by the solar panels are reduced to insignificant levels, if not eliminated — because in some countries, the producer pays for the excess power it gives to the distribution grid. This is because the electric power meters (the one provided by the electricity provider in the area) are not aware of the direction of power flow. In other words it only adds even if power is exported to the grid, thus, the consumers will be charged for power even if it is given to the grid, and this is the problem. This is the 2nd generation grid tie inverter with limiter. But in case customer install inverter far away from the main circuit breaker, we also enable the 2nd GTIL work with stand-alone limiter, we call this-external limiter. For sure, the inverter can work under normal Grid tie-no limit mode, just set on the nice LCD and save your setting. The 45-90V model inverter will start up at 49.5V, after starting, the voltage will drop to 45V, then inverter can work in 45-90V. Voc 60-90V solar panels in parallel is suggested. For example:Voc=36V solar panel, we suggest 2 panels in series, then connect 2 or more groups in parallel. Rated Power (Peak/Continuous): 1000W / 900W DC Input Voltage: 45V90V AC Output Voltage Range: 190V260V Peak power tracking voltage: 49.582V AC Output Frequency Range: 46Hz65Hz Peak Inverter Efficiency: 92% Stackable: Just for AC Output Output Wareform: Pure sine wave. 1 x On Grid Inverter with Limiter(built-in) 1 x AC cable 1 x Internal type Limiter clamp with sensor & 2m cable 1 x English User Manual. Stackable connectionThe purpose is let small power inverter become high-power inverter. Installation of GTIL With Internal Limiter. How to use the Power Limit function? Connects/clamps to one hot wire after the Main Circuit Breaker. Converts the magnetic field created by the flow of current in the wire into small AC voltage and current which is proportional to the power that passes through the wire. This installation is not require an additional limiter module, Installation is much easier. Clamp the current sensor cable to one of the hot wire to measure the current, the internal limiter will auto detect the load power and control the inverter output power, excess power will be well controlled. Limiter Setting on the LCD of the inverter. The GTIL include three working mode:Work as normal GTI without power limitation. Work under Internal limiter mode and Work under External limiter mode, Pls make your setting on the LCD and save it, details setting operation, pls read the GTI manual. Bat or solar limited current mode. This function is usable while using with battery. The setted voltage will be the cut off voltage, this means while battery discharged to the setted voltage point or below setted point, inverter will auto disconnect from the battery and stop operating. This can prevent the battery from over discharged. The setted current means inverter will discharge the battery at this current level. MPPT function of the inverter will auto invalid when working under this setting. Set is 0.1V/step. Set is 0.1V/Step. Sellers are not responsible for service transit time. Transit times are provided by the carrier, exclude weekends and holidays, and may vary with package origin and destination, particularly during peak periods. (Only for Business Express). Feedback is very important to us. Please do not give us any bad feedback. If you can do as we say, we will be very grateful. Please give us the opportunity to resolve any problem. The item “1000W MPPT Solar Grid Tie Inverter with Limiter Sensor DC45-90V to AC190V-260V” is in sale since Thursday, December 6, 2018. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “maihuiyan” and is located in shenzhen. This item can be shipped worldwide.

Brand: Y&H
Type: Grid Tie Inverter
Model: L2-1000W-DC45-90V-B
MPN: Does Not Apply
Country/Region of Manufacture: China
Custom Bundle: Yes
Rated Power (Peak/Continuous): 1000W / 900W
DC Input Voltage: 45V~90V
AC Output Voltage Range: 190V~260V
Peak power tracking voltage: 49.5~82V
AC Output Frequency Range: 46Hz~65Hz
Stackable: Just for AC Output
Output Wareform: Pure sine wave
Peak Inverter Efficiency: 92%
Voltage: DC45-90V

Category: 1000w | Comments Off

December 29

1000W Grid Tie inverter Solar with limiter MPPT pure sine wave DC45-90V

Only used for a little but moved to a house with solar already installed. This inverter has the option to not put any power back into the grid. The item “1000W Grid Tie inverter Solar with limiter MPPT pure sine wave DC45-90V” is in sale since Tuesday, December 25, 2018. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “motopat3398″ and is located in San Diego, California. This item can be shipped to United States.

Brand: KRXNY
Custom Bundle: No
Non-Domestic Product: No
Output Wave Form: Pure Sine Wave
Modified Item: No
Type: Grid Tie Inverter
AC Output: 110V 230V auto sense
Country/Region of Manufacture: China
Normal Voltage Range: 95-140V/185-265V
Frequency: 50HZ or 60HZ auto
Certificate: CE , ROHS
MPN: Does Not Apply

Category: 1000w | Comments Off

July 29

LCD Display 1000W Solar Grid Tie Inverter Pure Sine Wave DC45-90V AC110/230V

Blue Model with LCD Display 1000W Solar Grid Tie Inverter Pure Sine Wave. DC45-90V AC110/230V (automatic AC selection). This is the NEW GTI2 Model with enhanced display & menu features! Note – Pictures reflect screen of a 2K model but this listing is for a 1K. Newly developed grid tie inverter (second generation) with different design structure, enable better and stable operation quality. Some main improvements include a much better output pure sine waveform and better PF Value. This IS the brand that is well known for durability and function. These are US Stock and ships as soon as your order is received. With much better output pure sine waveform and better PF Value. Max input DC voltage. Peak power tracking voltage. 47.5-51.5 for 50hz, 59.3-60.5 for 60hz. Just for AC output. Meets Standards (pending certifications). The item “LCD Display 1000W Solar Grid Tie Inverter Pure Sine Wave DC45-90V AC110/230V” is in sale since Thursday, July 26, 2018. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “shore_distribution” and is located in Bayville, New Jersey. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica.

Model: SUN-1000G2-LCD
Country/Region of Manufacture: China
Brand: Masspower

Category: display | Comments Off

July 16

LCD Display 1000W Solar Grid Tie Inverter Pure Sine Wave DC45-90V AC110/230V

Blue Model with LCD Display 1000W Solar Grid Tie Inverter Pure Sine Wave. DC45-90V AC110/230V (automatic AC selection). This is the NEW GTI2 Model with enhanced display & menu features! Note – Pictures reflect screen of a 2K model but this listing is for a 1K. Newly developed grid tie inverter (second generation) with different design structure, enable better and stable operation quality. Some main improvements include a much better output pure sine waveform and better PF Value. This IS the brand that is well known for durability and function. These are US Stock and ships as soon as your order is received. With much better output pure sine waveform and better PF Value. Max input DC voltage. Peak power tracking voltage. 47.5-51.5 for 50hz, 59.3-60.5 for 60hz. Just for AC output. Meets Standards (pending certifications). The item “LCD Display 1000W Solar Grid Tie Inverter Pure Sine Wave DC45-90V AC110/230V” is in sale since Thursday, May 10, 2018. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “shore_distribution” and is located in Bayville, New Jersey. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Philippines.

Model: SUN-1000G2-LCD
Country/Region of Manufacture: China
Brand: Masspower

Category: display | Comments Off

April 1

LCD Display 1000W Solar Grid Tie Inverter Pure Sine Wave DC45-90V AC110/230V

Blue Model with LCD Display 1000W Solar Grid Tie Inverter Pure Sine Wave. DC45-90V AC110/230V (automatic AC selection). This is the NEW GTI2 Model with enhanced display & menu features! Note – Pictures reflect screen of a 2K model but this listing is for a 1K. Newly developed grid tie inverter (second generation) with different design structure, enable better and stable operation quality. Some main improvements include a much better output pure sine waveform and better PF Value. This IS the brand that is well known for durability and function. These are US Stock and ships as soon as your order is received. With much better output pure sine waveform and better PF Value. Max input DC voltage. Peak power tracking voltage. 47.5-51.5 for 50hz, 59.3-60.5 for 60hz. Just for AC output. Meets Standards (pending certifications). The item “LCD Display 1000W Solar Grid Tie Inverter Pure Sine Wave DC45-90V AC110/230V” is in sale since Wednesday, December 20, 2017. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “shore_distribution” and is located in Bayville, New Jersey. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Russian federation, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.

Brand: Masspower
Model: SUN-1000G2-LCD
Country/Region of Manufacture: China

Category: display | Comments Off

February 24

1000W Solar Grid Tie Inverter with Limiter Wechselrichter Mppt Function DC45-90V

Home & Farm Appliances. You may also like. 1000W Solar Grid Tie Inverter w/ Limiter Wechselrichter Mppt Function DC45-90V. The grid tie power inverter is the most efficiency and technologically advanced inverter for solar power system. Low cost and easy installation–it can make full use of all types of buildings’ surface that face to the sun in the city as well as fast and easy installation of solar modules and grid tie inverter. It just needs very low maintenance costs. Free combination — it can be used as a separate grid tie system and can be setup as a large solar array with many of them. Improving the efficiency of the entire solar power system– Because of MPPT function. So every panel is working at the maximum. 1000W Grid Tie Power Inverter. AC Output Voltage Range. AC Output Frequency Range. 412815.5cm(16.14″11″6.1). Installing Sunshine Grid Tie Power System involves several key steps. Considering the total capacity of the grid tie power system that you need. Choosing applicable solar panels for Sunshine Grid Tie Inverter. Selecting accessory for installation of the Grid Tie Power System. Selecting correct model of Sunshine Grid Tie Inverter. Installing solar panels to suitable place. Installing Sunshine Grid Tie Inverter to suitable place. Connecting Sunshine Grid Tie Power System with cables and connectors. Completing Sunshine installation map and Connecting the PV modules. Buyers will be responsible for custom clearance and potential tariff. The amount of tariff is composed of two parts. Part one is approximately. In general the products will arrive our customer around 5-9 days. We do appreciate your consideration and looking forward to doing business with all the clients and companies. We are manufacturers and wholesalers of solar panels and renewable energy products. Our solar business was established in 2002. OEM and ODM services are both available. We would like to be your best supplier in China. Working Time: Moday to Friday 5 days. If you haven’t received our reply within one days, We must be. Public holidays in China is not available for message reply. The item “1000W Solar Grid Tie Inverter with Limiter Wechselrichter Mppt Function DC45-90V” is in sale since Saturday, July 08, 2017. This item is in the category “Heimwerker\Erneuerbare Energie\Solarenergie\Photovoltaik-Zubehör\Solarmodule”. The seller is “ledmotelsolar” and is located in CN. This item can be shipped worldwide.

Brand: ECO-WORTHY
Type: 1000W Grid Tie Power Inverter
Power (W): 1000W
Application: Suit for100V&220V(auto switch)
Input Voltage: 24V
Output Voltage: 110V OR 220V
MPN: ECO-L03020201002-1
Marke: ECO-WORTHY
Herstellernummer: ECO-L03020201002-1
EAN: 0607052787745

Category: 1000w | Comments Off

November 2024
M	T	W	T	F	S	S
« Oct
				1	2	3
4	5	6	7	8	9	10
11	12	13	14	15	16	17
18	19	20	21	22	23	24
25	26	27	28	29	30