April
3
800W Grid Tie Micro Inverter DC30-42V AC180-260V for 30V 36V Solar PV+LCD
800W Grid Tie Micro Inverter DC30-42V AC180-260V for 30V 36V Solar PV+LCD. Microinverters turn the power from your solar panels into usable electricity. Single-phase microinverters are usually used in residential(Balcony Power Station). We have improved the AC wiring solution. Configure converters for faster installation. Avoid the risk of miswiring the fire, zero and ground wires. Meanwhile, the DC input is designed with MC4 connector to avoid reversing the positive and negative terminals. (Some customers extend the solar panel cable so that the positive and negative polarity is reversed). Grid Tie Inverter can monitor in real time the power generated by the inverter through the AC digital meter. (Voltage, current, active power, electrical energy, frequency, power factor)No fire risk and electric shock during installation and operation due to low DC voltage(up to 50V) compared with at least 200V from string inverters. Grid Tie Solar Inverter suitable for 2X400W solar panel (Vmp30-42V; Voc36-50V) Vmp = working voltage;Voc = open circuit voltage. Optimized for high powered 60-cell and 72-cell modules. Each MC4 branch cannot exceed 400W. Stackable Connection;High precision phase detection;Over and under voltage protection; Over and under frequency protection; Islanding protection. Almost no maintenance work is required, clean the dust on the photovoltaic panel occasionally. What has the microinverter improved? Improvement 1: 1 defective panel can stop the entire series system, resulting in a severe or complete loss of power supply. Improvement 2: On roofs with complex geometry, where the panels are always in shadow or in bad weather, the maximum working state output is maintained by MPPT tracking technology. Improvement 3: Small size a mounted on the back of the panel, you can use the balcony space and form a solar power station. Improvement 4: Low voltage input ensures safety performance. Improvement 5: Self-cooling heat dissipation, no noise. Improvement 6: A large system is damaged, you can still continue to rely on other independent systems to work to avoid wasting energy. Reccommend PV (Voc):3450V DC. MPPT Tracking voltage:2840V DC. Maxi Input Current:27.2A. Rated output current:3.63A. Max units per branch:10PCS. Rrequency:Auto switch 50/60Hz. Ambient temperature:- 40? Vmp(of a solar panel) must be in the MPPT Tracking range to ensure the good output efficiency. Use solar panel ONLY connect to this equipment. This equipment is ON-GRID Microinverter, To make it work properly, it must be connected to the power grid correctly, and the power grid is working properly, When the power grid stopped working, it will also stop generating. Do NOT exceed PV panel(s) voltage over the Solar Grid Tie Inverter max input voltage. Do NOT exceed PV panel(s) power over the Grid Tie solar Inverter max input power. The positive and negative poles of the solar panel cannot be reversed. If you extend the solar panel cable. You need to be careful about this problem. Install away from direct sunlight and direct rain exposure. Regarding the heating problem of the inverter. This is normal phenomenon. All electronic devices generate heat during operation. The inverter uses aluminum alloy material. Metal can conduct heat better. The inverter also has over-temperature protection if the temperature is high. Then the inverter will automatically reduce the working output efficiency. After cooling down, restart. It is recommended to install the inverter in a ventilated, dry and cool place. After a large amount of customer data feedback, the inverter cannot work because the DC or AC fuse is damaged. (The red light is on because the AC accessories are damaged, and if the light is off, the DC accessories are damaged)When you encounter this problem, we can send you accessories for free. And give you maintenance video instruction. You can easily replace it. Feedback is very important to us. Please do not give us any bad feedback. If you can do as we say, we will be very grateful. Please give us the opportunity to resolve any problem. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “eprec-us” and is located in this country: CN. This item can be shipped to United States, all countries in Europe, all countries in continental Asia, Canada, Mexico, Brazil, Australia.
- Ambient temperature: – 40°Cto +65°C
- Brand: Y&H
- Inverter-Technologie: Mikroinverter
- Maxi Input Current: 27.2A
- Maximum Input Power: 800W
- Modello: Pure Sine Wave Inverter
- MPPT Tracking voltage: 28~40V DC
- Paese di fabbricazione: Cina
- Power supply: Solar
- Rated output current: 3.63A
- Rated voltage: 110V
- Reccommend PV (Voc): 34~50V DC
- Recommend PV: 2 * 400W
- Rrequency:Auto switch: 50/ 60Hz
- Tecnologia a inverter: Microinverter
- Tipo di corrente: Charger/inverter
