New Wind Power Grid Tie Inverter With Limiter /dump Load Controller 2000w 1000w

2000w 1000w Wind Power Grid Tie Inverter With Limiter /dump Load Controller/resi. 2000W 1000W Wind Power Grid Tie Inverter with Limiter /Dump Load Controller/Resistor for 3 Phase 48v 60v wind turbine generator –Max Efficiency:>92% MPPT Efficiency:99% –3PHASE AC 45V-90V –AC 220V 230V 240V 50hz 60hz NEW 1000W 2000W Wind Power Grid Tie Inverter Max Efficiency:>92% MPPT Efficiency:99% 1. Low cost and easy installation 2. Directly connect to three phase wind turbine 3. Much better output waveform compare with similiar GTI 4. Improving the efficiency of the entire solar power system Overload protection, Anti-island protection Short-circuit protection/Reverse polarity protection 5. AC output voltage and current THD. Input AC/DC Voltage Range. AC Output Voltage Range. Dimensions (W x H x D). (1) (2) Dump load resistor connection Terminal. This terminals will connect to the dump load resistor. (3) AC socket, This socket will connect the inverter to the public grid via the AC cable. This terminals will connect to the wind turbine. Inverter Display Instruction The Inverter display can show many information, The main interface of the display and the icons explainations are show above. The inverter also integrate with internal limiter and external limiter function which can prevent excess power from going to the public grid. Select the internal limiter mode, inverter will work under limiter mode, output power of the inverter will be determined by load power. Select the external limiter mode, inverter need a external limiter module working with it. For more details about the limiter function, pls contact supplier. This function only useful with limiter type inverter. Power View: In this interface, the display shows real time power, PV input voltage, inside temperature, date and time. Clock And Date Setting: Set the clock and date in this page, save the setting before exit. Notes: Save the setting after you reconfigurate the working mode or backlight setting. Notes: Battery Discharge Current Mode And Battery Discharge Power Mode are not developed yet for this wind inverter. Grid Waveform: This interface will show the real time grid waveform. The grid voltage and frequency also will show in this interface. Energy Menu: The energy interface will show the power generation curve everyday. Today KWH and Total KWH are also show in this page. AC Output Current Waveform and PF Test Of 2000W Model Tested 2000W model at nearly full load, Output current waveform shows good pure sine wave in oscilloscope, PF value also shows in good result, 99.8% PF value. Advanced patented technology, MPPT efficiency is higher. High-quality imported components, more stable quality, lower failure rate. Significantly longer life, more than 10 years. Each inverter need to pass twice testing (20 hours) before leaving factory. Low cost and easy installation. Combination of SGPV does not interact. Improving the efficiency of the entire solar power system. The product came very well packaged. I’m very happy. Thank you for everything. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “best-shopping-with-us” and is located in this country: CN. This item can be shipped worldwide.

Color: Only Inverter
Input Voltage: 3phase Ac 22-65v
Output Voltage: 1000W 90-260VAC
Socket Type: US
Origin: Mainland China
Brand: Unbranded
Type: Charger/Inverter
Current Type: AC/DC
System Configuration: Grid-Tie
Power Source: Wind
Output Type: Single
Output Current: 0-20a
Model Number: Teg-1000g-wal, Teg-2000g2-wal
Is_customized: Yes
Output Frequency: 46hz ~ 65hz

Category: wind | Comments Off

May 14

1000w 2000w Solar Inverter With Limiter Sensor Mppt On Grid Tie Inverter Converter

Category: 1000w | Comments Off

April 13

2000W Grid Tie Inverter with Power Limiter MPPT Stackable DC45-90V to AC190-260V

2000W Grid Tie Inverter with Power Limiter MPPT Stackable DC45-90V to AC190-260V. Why we produced the GRID TIE INVERTER WITH LIMITER? It is in response to the overwhelming clamor from our customers for a product that can control the amount of power that the grid tie inverters (GTI) can generate so that the amount of excess power produced by the solar panels are reduced to insignificant levels, if not eliminated — because in some countries, the producer pays for the excess power it gives to the distribution grid. This is because the electric power meters (the one provided by the electricity provider in the area) are not aware of the direction of power flow. In other words it only adds even if power is exported to the grid, thus, the consumers will be charged for power even if it is given to the grid, and this is the problem. This is the 2nd generation grid tie inverter with limiter. But in case customer install inverter far away from the main circuit breaker, we also enable the 2nd GTIL work with stand-alone limiter, we call this-external limiter. For sure, the inverter can work under normal Grid tie-no limit mode, just set on the nice LCD and save your setting. New upgraded firmware enable battery or solar limiter current and power model. User can set the maximum output power of inverter, this can make the inverter work at cooler contition as user want and extend the lifespan of the inverter. User can set kick in/off voltage of the inverter which can flexible using with battery bank depend on users mind and can prevent battery bank from over discharged. Continuous Power Output:1950W Peak Power Output:2000W Input DC Voltage Range:45V 90V Peak power tracking voltage:50V-90V AC Output Voltage Range:190VAC 260VAC Output Frequency:46Hz65Hz Standby Power Consumption. How to use the Inverter? Standard Grid Tie Inverter Model. More than 1 unit inverters stackable. The Grid Tie inverter converts DC power produced by Solar Panels to AC, connects to the grid and feed all of the power available from the panels to the AC load. All excess power that is not needed by the load is then exported to the Grid. If the Grid fails, then the Grid Tie Inverter will turn off. When the Grid comes back on line. The Grid Tie Inverter will again supply power to the load and any excess power is exported to the Grid again. If the Solar Panel is producing less power and the GTI cannot deliver all the power needed by the load, then power will be supplemented by the Grid. Power Meters (Except smart meter) are not aware of the direction of Power flow. The user then pays for the power exported and delivered by the Grid. Using Grid Tie Inverter With Limiter Model. The Grid Tie Inverter with Limiter delivers only the power needed by the load and prevents delivering excess power hence avoids excess power in going back to the Grid. The heart of the Grid Tie Inverter with Limiter is the Limiter Module (LM). The LM continuously sampled the power needed by the load through the current sensor connected after the Main Circuit Breaker. The LM then will process the signal. It then sends signal to Grid Tie Inverter how much power to deliver to the load in real time. The user, after installing and connecting the GTIL correctly, need not do anything and the unit will do its work automatically. Installation of GTIL With Internal Limiter. This installation is not require an additional limiter module, Installation is much easier. Clamp the current sensor cable to the hot wire to measure the current, the internal limiter will auto detect the load power and control the inverter output power, excess power will be well controlled. External protective device including dc and ac SPD(Surge protection device), dc and ac breaker, etc is recommended to installed in the system. Limiter Setting on the LCD of the inverter. The GTIL include three working mode:Work as normal GTI without power limitation. Work under Internal limiter mode and Work under External limiter mode, Pls make your setting on the LCD and save it, details setting operation, pls read the GTI manual. 5 Battery Discharge Power Mode. 6 Limiter Module Specification. Clamp sensor- Max 100A. Clamp sensor signal- 5v AC max mA. DC signal Cable- 5v DC, max mA. 1 x Solar Grid Inverter with Limiter 1 x Internal type Limiter clamp with sensor & 2m cable 1 x English User Manual. Sellers are not responsible for service transit time. Transit times are provided by the carrier, exclude weekends and holidays, and may vary with package origin and destination, particularly during peak periods. (Only for Business Express). Feedback is very important to us. Please do not give us any bad feedback. If you can do as we say, we will be very grateful. Please give us the opportunity to resolve any problem. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “bayoung-electronic” and is located in this country: CN. This item can be shipped worldwide.

AC Output Voltage Range: 190VAC ~ 260VAC
Brand: Bayoung
Color: Blue
Continuous Power Output: 1950W
Country/Region of Manufacture: China
Input DC Voltage Range: 45V ~ 90V
Model: 2000W Limiter Grid Tie Inverter
MPPT Function: Yes
Output Frequency: 46Hz~65Hz
Output Wave Form: Pure Sine Wave
Peak Power Output: 2000W
Peak power tracking voltage: 50V-90V
Stackable: Yes
System Configuration: Grid-Tie
Voltage: DC45-90V
Wattage: 2000W

Category: 2000w | Comments Off

March 3

2000W 3000W Pure Sine Wave Power Inverter DC 12V to AC 110V With Remote Control

Pure Sine Wave 2000W 3000W Power Inverter DC 12V to 110V Converter LCD Camping. 2000W/3000W Pure Sine Wave Solar Inverter 12V Battery Power. Pure Sine Wave Inverter. Pure sine wave inverter adopts an aluminum alloy shell to resist heat, cold, and corrosion. LCD screen and LED indicators are convenient for users to master the power inverter working promptly. High-quality pure copper inductances filter the waveform and lower the idle power draw, ensure the true pure sine wave AC output, safeguard your equipment. The inverter uses branded big MOSFETs, capacitors, volt transformers with advanced programmed software, and rational hardware design, making a strong driving capacity. The power inverter features a built-in intelligent temperature-controlled cooling fan. When the machine’s internal temperature reaches a certain level, the fan will rotate and effectively reduces the operating temperature. The pure sine wave power inverter applies multiple intelligent security protections to ensure the inverter is fully protected in the process of use so that the electrical appliances will operate stably and safely. This power inverter is designed for equipment that requires careful protection to provide a more stable pure sine wave output. This inverter is built with the universal standard, suitable for power tools, office supplies, household / kitchen appliances. It can be used in the solar and wind system as well. Get your battery charged by solar panel with the solar charge controller. It delivers ultra-clean pure sine wave power, which is the same as the AC grid power supplied by your utility to prevent crashes in computers. It also reduces electromagnetic interference in TV and other sensitive devices. With its compatibility, it improves AC equipment performance with low interference technology. Note: How to choose suitable power inverters for your equipment? If you need the car power inverter to run the resistive loads (like TV, electric cooker, LED light), please choose the inverter with continuous power higher than the appliance’s rated power. If you need the pure sine wave inverter to run the inductive loads(for appliances such as drill, saw, compressor, motor, water pump), please calculate the inverter’s rated power 3 to 7 times higher than the rated power of your appliance. For the pure sine wave inverter, we suggest you use a 150Ah and above battery to power the loads to ensure the best performance. Please do not leave the power inverter in the ON position while your car is off. Disconnect the positive battery terminal before doing any wiring to the inverter. Meet the electricity needs of 99.99 % of products on the market, such as game consoles, car vacuum cleaners, cameras, TVs, mobile phones, refrigerators, DVD players, flood lights or anywhere AC power is required. Our power inverter shell is made of aluminum alloy, which has strong heat dissipation performance and is durable. The aluminum alloy shell can withstand various harsh environments, protect the internal components, and make the inverter safe for long-term use. [Smart air-cooled electric fan]. The cooling fan system makes the car power inverter quite silent when operating and helps reduce heat. The fan will be running faster when the device gets warmer or output power exceeds 60W. Thereby protecting your equipment more effectively. [US sockets and LCD monitors]. Equipped with stable US safety power sockets, intelligently detect your equipment and match the current you need to use. The smart LCD display shows the power consumption anytime, anywhere. You can also control the inverter on and off by pressing and holding the switch for 3 seconds. [Wide range of applications]. The power inverter is a pure sine wave inverter with a wide range of applications. High efficiency, stable sine wave output, high frequency technology, small size, light weight, suitable for various loads. It is widely used in electric fans, electric kettles, hand drills and car travel, camping, long-distance travel, etc. [Pure sine wave inverters]. Pure sine wave inverter can be connected to any common electrical equipment without any interference (such as Weng Weng sound and TV noise). Before using the remote control, it needs to be paired with the inverter; long press the power button of the inverter for 3 seconds, then press the power button of the remote control to complete the setting. Remote control range = 10 meters. Car power Converter Certification: CE/FCC Output power: 2000W/3000W Peak power: 4000W/6000W Overvoltage protection: 12V (15.0V±0.3) Low voltage protection: 12V (10V±0.3) Recovery voltage: 12V (13.2V±0.3) Input voltage: 12V Output voltage: 110V Output frequency: 50Hz /60Hz Output waveform: pure sine wave Conversion efficiency: 90% Overload protection: =130% Overheating Protection: 80°C ± 5°C Display: Smart LCD display Cooling method: Built-in air cooling Size: 36017379mm/40024288mm Weight: 4Kg/7.5Kg Operating temperature: -20°C 40°C Storage temperature: -10°C 40°C. Car Power Inverter Working temperature is -30? Relative humidity 0%-95%, no condensation. Keep the inverter away from water and avoid spilling water on the machine or rising. Do not insert or unplug the plug with wet hands. Keep the inverter in a cool environment, the suitable temperature should be -20°C40°C, avoid direct sunlight and hot vents. Keep the inverter away from places where flammable materials or flammable gas accumulate. Turn off the switch when the machine is not in use. Please turn off the switch before cleaning. 1 x Pure Sine Wave Inverter(with box) 2 x Battery Cables 1 x User Manual 1× Remote control. Please make sure you have a valid account before purchasing. PO Box addresses are not accepted. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “datouboss01″ and is located in this country: US. This item can be shipped to United States, Mexico, Canada.

Power-YK: YK-3000W
Waveform: Pure Sine Wave
Current Output: 10 A or Less
System Configuration: Grid-Tie
Power Source: Solar
Custom Bundle: No
Wattage: 3000-3499 W
Maximum Flow Rate: 0.5 GPM (1.9 L/min) or Less
MPN: 01
Current Type: DC
Voltage: 11-20 V
Connector Type: Amphenol (Helios H4)
Features: LCD Display
Protection Properties: Overcharge Protection, Overcurrent Protection, Overload Protection, Overspeed Protection, Overvoltage Protection, Reverse Current Protection, Reverse Polarity Protection, Reverse Voltage Protection, Safety Circuit Protection, Short Circuit Protection
Maximum Input Power: 501-600 W
Maximum Input Voltage: 11-20 V
Inverter Technology: Battery-Based
Color: Black
Current Rating: 1-5 A
Material: Aluminum alloy
Brand: Unbranded
Type: Charger/Inverter
Model: Pure Sine Wave
Recommended Environment: Indoor/Outdoor
Charging Mode: MPPT (Maximum Power Point Tracking)
Resistance Properties: Abrasion Resistant, Acid Resistant, Antimicrobial Resistant, Chemical Resistant, Childproof
Country/Region of Manufacture: China
Application: Agriculture/Farming, Automotive, Back-up Power, Camping/Hiking, Commercial, Electronics, Home/Garden, Irrigation, Marine, Municipal, Pool, Recreational Vehicle (RV)
Power: Greater Than 2000 W

Category: 2000w | Comments Off

January 26

External Brake Controller For The 2000w Turbine Grid Tie Inverter

Category: external | Comments Off

October 4

Grid Tie Solar Panel Inverter 2000W 4 MPPT 230VAC 240V 60Hz WIFI Micro Inversor

Grid Tie Solar Panel Inverter 2000W 4 MPPT 230VAC 240V 60Hz WIFI Micro Inversor. Grid Tie Solar Panel Inverter. 2000W 4 MPPT 230VAC 240V 60Hz. There may be some delays due to flight, holiday, weather, local post, local natural disaster impact. It must also be in the original packaging. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “rodonite-7″ and is located in this country: CN. This item can be shipped worldwide.

Color: Inverter 5M AC cable
Input Voltage: 20-60V
Output Voltage: 230V(184-265V)
Size: 267 * 300 * 42.5 mm
Current Rating: Other
Inverter Technology: Microinverter
Model: 3654968830
Country/Region of Manufacture: China
Maximum Input Power: Other
Max units per branch: @230V:4PCS
Custom Bundle: No
MPPT: 25-55V
Operating temperature: – 40℃ to +65℃
Output Current: 9.2A(Maximum)
Output Frequency: 50/60Hz
Output Power: 2112W(Maximum)
Rated output current: @230VAC 9.2A
Rrequency: 50/60Hz(45~65Hz)
Start-Stop voltage: 20-60V
Static MPPT: 99%
Current Type: AC
System Configuration: Grid-Tie
Material: Other
Weight: 5.3kg
Power Source: Solar
Type: Charger/Inverter
Features: Durable
MPN: 3654968856
Recommended Environment: Indoor/Outdoor
Item Length: Standard
Power: 2000W
Current Output: Other
Brand: Unbranded
Application: Electronics, Home/Garden
Charging Mode: MPPT (Maximum Power Point Tracking)
DC short current: 16A*4
Dimensions: 267*300*42.5 mm (Without mounting bracket and c…
Is Smart Device: YES
Max Input Current: 12.5A*4
Max output: 96.5%
Max output Power: 2112W
Max solar panel: 4*600W (max)
Resistance Properties: Other
Voltage: 230VAC 240V

Category: grid | Comments Off

September 29

2000W Grid Tie Solar Inverter Micro Inversor 4 MPPT Solar Panel 230VAC 240V Home

2000W Grid Tie Solar Inverter Micro Inversor 4 MPPT Solar Panel 230VAC 240V Home. This Grid Tie Micro inverter has an unique design for 4 PV panels and it has a remote monitoring system. This 2000W Grid Tie Micro inverter is used in utility-interactive grid-tied applications. This 2000W Grid Tie Micro inverter has an IP67 protection degree and there is a facility for WiFi communication. Micro inverters Maximize PV Energy Production. Each PV module has individual Maximum Peak Power Tracking (MPPT) controls, which ensures that the maximum power is exported to the utility grid regardless of the performance of the other PV modules in the array. When PV modules in the array are affected by shade, dust, orientation, or any situation in which one module under performs compared with the other units, the Micro inverter ensures top performance from the array by maximizing the performance of each module within the array. More Reliable than Centralized or String Inverters. The distributed Micro inverter system ensures that no single point of system failure exists across the PV system. Micro inverters are designed to operate at full power at ambient outdoor temperatures of up to 149? You can install individual PV modules in any combination of Module quantity, orientation, different type and power rate. The Ground wire (PE) of the AC cable is connected to the chassis inside of the Micro inverter, potentially eliminating the installation of grounding wire (check local regulation). Data collection adopts internal wifi, wireless router is needed near the micro inverter. When complete the installation of the micro inverter, configure wireless router with internal Wi-Fi (refer to the Wi-Fi user manual). The data will be uploaded automatically. Users can monitor and manage the micro inverter through corresponding website or APP. Start-Stop voltage – 20-60V. Recommend PV Voc – 33-60V. Max Input Current – 12.5A4. Rated Output Power – 2000W. Rated output current – 230VAC 9.2A. Frequency – 50/60Hz(4565Hz). Static MPPT – 99.00%. CEC Weighted Efficiency – 95%. Self consumption – 50mW. Net Weight(Kg) – 5.3kg. All items will be checked carefully and packaged in good condition before dispatch the product. The arrival time depends on your location. If you are satisfied with our products and services, we must be thankful to you, if you can give us feedback about our products and services. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “vijayas-6205″ and is located in this country: CN. This item can be shipped worldwide.

Color.: Only Inverter
System Configuration: Grid-Tie
Inverter Technology: Microinverter
Current Output: 10 A or Less
Power Source: Solar
Size: 267 * 300 * 42.5 mm
Custom Bundle: No
Wattage: 2000W
Max Input Current: 12.5A*4
Current Type: AC
Voltage: 230V(184-265VAC)
Connector Type: Standard
Features: All Daylight Conditions, Automatic Voltage Detection
Is Smart Device: Yes
Protection Properties: Anti-island Protection
Maximum Input Power: 2000W
Maximum Input Voltage: 20-60V
Color: Gray
Current Rating: 9.2A
Brand: Unbranded
Type: Charger/Inverter
Model: 2000W Grid Tie Solar Inverter
Recommended Environment: Indoor/Outdoor
Charging Mode: MPPT (Maximum Power Point Tracking)
Resistance Properties: Dustproof, Dust Resistant, Heat Resistant
Country/Region of Manufacture: Unknown
Application: Agriculture/Farming, Electronics, Home/Garden
Power: 2000W
Product Line: Grid Tie Solar Inverter

Category: 2000w | Comments Off

September 25

Solar Grid Tie Inverter WIFI MPPT 1000W 2000W Limiter Sensor Battery Discharge

Solar Grid Tie Inverter WIFI MPPT 1000W 2000W Limiter Sensor Battery Discharge. Clamp Sensor:with 3meters/10meters cable(choose). A Wifi Plug with Cable(choose). An AC Power Cable. Piece User Manual (English). The V6.1 version cancelled the EXTERNAL port. We will randomly send the V5.1 version and V6.1 version. The other functions and performances of the improved product are the same as those before the improvement. After the product is improved, it will be more convenient for users to use the product. The products modified include the SUN-2000G2, SUN-1000G2 of solar inverter and SUN-2000G2-WAL(WDL) and SUN-1000G2-WAL(WDL) of wind inverter. Feature for the Solar grid tie inverter. Easy installation, can be paralleled on AC side. Nice LCD display various parameters including input voltage, output power, temperature, form etc. Can be integrated with internal limit function. RS485 extended interface serviceable. Power curve, output sine wave collect by wifi plug and monitor. Work with solar panels/work with battery. NOTE : It will be built-in side the inverter. How to use the grid tie inverter? 1 unit inverter installation / more units inverters in parallel. The inverter AC output can be connected in the AC plug of grid in the house. Using Grid Tie Inverter With Limiter Model. 2.1 The Grid Tie Inverter with Limiter delivers only the power needed by the load and prevents delivering excess power hence avoids excess power in going back to the Grid. 2.2 The heart of the Grid Tie Inverter with Limiter is the Limiter Module (LM). The LM continuously sampled the power needed by the load through the current sensor connected after the Main Circuit Breaker. The LM then will process the signal. It then sends signal to Grid Tie Inverter how much power to deliver to the load in real time. 2.3 The user, after installing and connecting the GTIL correctly, need not do anything and the unit will do its work automatically. Installation of GTIL With Internal Limiter. 3.1 This installation is not require an additional limiter module, Installation is much easier. Clamp the current sensor cable to the hot wire to measure the current, the internal limiter will auto detect the load power and control the inverter output power, excess power will be well controlled. 3.2 External protective device including dc and ac SPD(Surge protection device), dc and ac breaker, etc is recommended to installed in the system. There may be some delays due to flight, holiday, weather, local post, local natural disaster impact. It must also be in the original packaging. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “ginmega” and is located in this country: CN. This item can be shipped worldwide.

Colour: SUN-2000
Input Voltage: DC45V-90V
Output Voltage: 185-265VAC
Socket Type: With 3m-Sensor Wi-Fi
System Configuration: Grid-Tie
Current Output: Other
Power Source: Solar
Inverter Technology: Microinverter
Size: Standard
Color: Multicolor
Custom Bundle: No
Wattage: Other
MPN: 870989098
Item Length: Standard
Brand: Unbranded
Type: Charger/Inverter
Current Type: AC/DC
Voltage: DC45V-90V or to AC110V AC220V
Model: Other
Recommended Environment: Indoor/Outdoor
Features: Durable
Charging Mode: MPPT (Maximum Power Point Tracking)
Resistance Properties: Other
Country/Region of Manufacture: China
Application: Agriculture/Farming, Electronics, Home/Garden
Power: 1000W 2000W
Protection Properties: Other

Category: solar | Comments Off

September 23

2000W Grid Tie Inverter with Power Limiter MPPT Stackable DC45-90V to AC190-260V

AC Output Voltage Range: 190VAC ~ 260VAC
Brand: Bayoung
Color: Blue
Continuous Power Output: 1950W
Country/Region of Manufacture: China
Input DC Voltage Range: 45V ~ 90V
Model: 2000W Limiter Grid Tie Inverter
MPPT Function: Yes
Output Frequency: 46Hz~65Hz
Output Wave Form: Pure Sine Wave
Peak Power Output: 2000W
Peak power tracking voltage: 50V-90V
Stackable: Yes
System Configuration: Grid-Tie
Voltage: DC45-90V
Wattage: 2000W

Category: 2000w | Comments Off

September 22

2000W Wind Power On Grid Tie Inverter 220V Output Wind Turbine Input 110V Mains

2KW Wind Power Grid-tied Inverter. WWGIT20 is wind power grid-tied controller&inverter integrated machine with MPPT function. It looks concise and can be easily operated. Keep pressing the button for 5s to unload completely. And then recover by pressing it for another 5s. Switch “ON” the brake switch. Brake by over wind speed. It dumps load completely when reached the set wind speed, and recover automatically after working 10mins and wind speed is less than 15m/s. Brake by over rotational Speed. Unload completely when reached the set rotational speed, and recover automatically after 10mins. 85%110% of rated grid voltage. AC output over frequency. AC short circuit protection. Dump load, grid state, wind generator state, faults. Wind rotate speed, wind power, AC output voltage /current/power, and fault code. Dump load dimension(WHD). Dump load net weight. Note: Part of parameters can be adjusted according to customer. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “bayoung-electronic” and is located in this country: CN. This item can be shipped worldwide.

Type: Charger/Inverter
Brand: Bayoung
Application: Agriculture/Farming, Aquaculture, Back-up Power, Camping/Hiking, Commercial, Electronics, Home/Garden
Resistance Properties: Abrasion Resistant, Acid Resistant, Antimicrobial Resistant, Chemical Resistant, Childproof, Child Resistant, Corrosion Resistant, Dustproof
Current Rating: 11-20 A
Inverter Technology: Hybrid
Wattage: 2000-2499 W
Current Type: AC
System Configuration: Grid-Tie
Power Source: Wind
Features: All Daylight Conditions, Automatic Voltage Detection, Brushless Motor, Corrosion Resistant, Daylight Operation, Fixed Guyed, Flexible
Power: 1801-2000 W
Current Output: 10 A or Less
Charging Mode: MPPT (Maximum Power Point Tracking)
Voltage: 200-299 VAC

Category: 2000w | Comments Off

November 2024
M	T	W	T	F	S	S
« Oct
				1	2	3
4	5	6	7	8	9	10
11	12	13	14	15	16	17
18	19	20	21	22	23	24
25	26	27	28	29	30