2000W Solar On Grid Tie Inverter AC 220V With Limiter Solar Panels Home System

You may also like. 2000W Solar On Grid Tie Inverter AC 220V With Limiter Solar Panels Home System. AC 220V 230V 240V auto. Dimensions (W x H x D). LCD Display, Wi-Fi Port. MPPT (Maximum Power Point Tracking). 2000W Solar On Grid Tie Inverter With Limiter Solar Panels Home System. Why we produced the GRID TIE INVERTER WITH LIMITER? It is in response to the overwhelming clamor from our customers for a product that can control the amount of power that the grid tie inverters (GTI) can generate so that the amount of excess power produced by the solar panels are reduced to insignificant levels, if not eliminated — because in some countries, the producer pays for the excess power it gives to the distribution grid. This is because the electric power meters (the one provided by the electricity provider in the area) are not aware of the direction of power flow. In other words it only adds even if power is exported to the grid, thus, the consumers will be charged for power even if it is given to the grid, and this is the problem. This is the 2nd generation grid tie inverter with limiter. But in case customer install inverter far away from the main circuit breaker, we also enable the 2nd GTIL work with stand-alone limiter, we call this-external limiter. For sure, the inverter can work under normal Grid tie-no limit mode, just set on the nice LCD and save your setting. New upgraded firmware enable battery or solar limiter current and power model. User can set the maximum output power of inverter , this can make the inverter work at cooler contition as user want and extend the lifespan of the inverter. User can set kick in/off voltage of the inverter which can flexible using with battery bank depend on users mind and can prevent battery bank from over discharged. Gereantion 2000w Standard Solar Power Grid Tie Inverter. With Limiter / Sensor , Battery Discharge Power Mode. AC 220V 230V 240V (auto selected). For USA 240VAC connection , please see photo below. SGPV and Grid Tie Inverter. SGPV – small solar grid tie inverter and solar panels. The inverter can obtain the solar energy from solar panel, and tie to the grid through its output cables with no extra equipment. The installation is very convenient and reliable. When the sun shines, the solar panels will produces DC voltage, and the grid tie inverter will change the DC voltage to AC voltage and puts out power to the home grid. The electric apparatus in the house will use power from the inverter first. The power meter will SLOW down. Advantage of the 2G grid tie inverter? The 2nd Generation grid tie inverter, new technical , Higher efficiency. Higher MPPT efficiency , Max 99%. Multiple intelligent protection to ensure safe use. Wide DC input voltage , suitable for all types solar panels. Easy to install and easy to operate. Power Limiter function , Battery discharge function support. Pure sine wave form output , THD. Input DC Voltage Range. Peak power tracking voltage. AC Output Voltage Range. How to use the grid tie inverter? 1 unit inverter installation / more units inverters in parallel. The inverter AC output can be connected in the AC plug of grid in the house. LCD display and operation. Bat or solar limited current mode. This function is usable while using with battery. The setted voltage will be the cut off voltage, this means while battery discharged to the setted voltage point or below setted point, inverter will auto disconnect from the battery and stop operating. This can prevent the battery from over discharged. The setted current means inverter will discharge the battery at this current level. MPPT function of the inverter will auto invalid when working under this setting. Set is 0.1V/step. Set is 0.1V/Step. Note : Limiter model must use limiter sensor/clamp , there is not limiter sensor and clamp with this model inverter. If the Solar Panel is producing less power and the GTI cannot deliver all the power needed by the load, then powe will be supplemented by the Grid. Power Meters (Except smart meter) are not aware of the direction of Power flow. The user then pays for the power exported and delivered by the Grid. Optional Function : Wi-Fi port. (Only for Business Express). We understand the concerns and frustrations you might have, and will do our endeavor to resolve the issues. Please give us the opportunity to resolve any problem. 7-10 / 2-7 work days. 12-15 / 2-7 work days. Italy, France, Germany, Russia, Brazil, Argentina. 25-30 / 2-7 work days. The item “2000W Solar On Grid Tie Inverter AC 220V With Limiter Solar Panels Home System” is in sale since Monday, November 16, 2020. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “homegarden0722″ and is located in Walnut, California. This item can be shipped to United States.

Brand: SUN
MPN: SUN-2000G2TIL-B
Country/Region of Manufacture: China
Input Voltage: 45v-90v
Output Voltage: AC 220V 230V 240V auto
Output Frequency: 45-65Hz
Standby Power Consumption: <0.5w
Total Harmonic Distortion: <5%
Peak Inverter Efficiency: 92%
MPPT Efficiency: 99%
Power Factor: 0.99
Output Wave Form: Pure Sine Wave
Limiter Sensor Cable: 3m
Weight: 5.5kg
Dimensions (W x H x D): 434x196x88 mm
Internal Limiter: Built-in
Featured Refinements: MPPT
Model: SUN-2000G2TIL-B
Color: Blue
Features: LCD Display
Power Source: Solar
Voltage Input: 45v-90v
Voltage Output: 220v
Wattage: 2000w
Type: Charger/Inverter
Charging Mode: MPPT (Maximum Power Point Tracking)

Category: 2000w | Comments Off

November 7

2000w Inverter 24V model, Pure Sine Wave off Grid Tie Inverter 24 VOLT

2000W 24V DC-Input 220V AC-Output Pure Sine Wave off Grid Tie Inverter. This is a compact and highly portable power inverter Which has an excellent track record in the field of high frequency inverter. From the 24V DC outlet in your vehicle or boat, or directly from a dedicated 24V DC battery, this inverter can efficiently and reliably power a wide variety of house hold AC products, such as TV, Computers, Air-conditioner etc. PWM(Pulse Width Modulation). With power ON/OFF switch and LED indicator. Overload protection/Over voltage protection/Short Circuit protection. The item “2000w Inverter 24V model, Pure Sine Wave off Grid Tie Inverter 24 VOLT” is in sale since Tuesday, August 18, 2020. This item is in the category “Home, Furniture & DIY\DIY Materials\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “ultraedge” and is located in Prescot. This item can be shipped to United Kingdom, United States, Japan, Canada, Ireland, Australia, Germany, France, Greece, Italy, Spain, Antigua and barbuda, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, Hungary, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Sweden, Bahrain, Brazil, New Zealand, China, Israel, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Bangladesh, Belize, Bermuda, Bolivia, Barbados, Brunei darussalam, Dominica, Ecuador, Egypt, Guernsey, Gibraltar, Guadeloupe, Grenada, French guiana, Iceland, Jersey, Jordan, Cambodia, Saint kitts and nevis, Saint lucia, Liechtenstein, Sri lanka, Macao, Monaco, Maldives, Montserrat, Martinique, Nicaragua, Oman, Pakistan, Peru, Paraguay, Reunion, Turks and caicos islands, Aruba, Saudi arabia, South africa, United arab emirates, Ukraine, Chile, Bahamas, Colombia, Costa rica, Guatemala, Honduras, Jamaica, Kuwait, Panama, Philippines, Qatar, Trinidad and tobago, Uruguay, Viet nam.

Inverter Technology: Battery-Based
System Configuration: Off-Grid
Power Source: Solar
Brand: PowMr

Category: 2000w | Comments Off

October 22

2000W Grid Tie Solar Inverters Power Limiter DC 45-90V AC 220V 230V SUN 2000GTIL

2000W Solar Power Grid Tie Inverter with Limiter. Easy installation, Can be paralleled on AC side. Nice LCD display various parameters including input voltage, output power, temperature, power curve, output sine wave- form etc. Can be integrated with internal limit function. Battery discharge power mode enabled, Can auto regulate depth of discharge of the battery bank. RS485 extended interface serviceable. Standard Grid Tie Inverter. The Grid Tie inverter converts DC power produced by Solar Panels to AC, connects to the grid and feed all of the power available from the panels to the AC load. Power Limit Function-Stop to send excess power to the grid. When the inverter is working , all excess power that is not needed by the load is then exported to the Grid. Electric meters (except smart meter) are not aware of the direction of Power flow. The user then pays for the power exported and delivered by the Grid. The Grid Tie Inverter with Limiter delivers only the power needed by the load and prevents delivering excess power hence avoids excess power in going back to the Grid. Most of the time, more electricity is used at night. Solar panels work only during the day when there is sunlight. User can use battery instead of solar panels. The system will work the whole day. User can set the battery discharge voltage and reboot voltage. The system will work automatically. Monitor the operating status of the inverter in mobile applications. Technical Parameter Data Sheet. Input DC Voltage Range. Peak power tracking voltage. AC Output Voltage Range. Certifications : CE , VDE-0126 , EN50438. Q:Can this device charge a battery? A: No, it accepts battery input. But it can not charge a battery. Q:Can I install more than one inverters in my house? A: Yes, the grid tie inverters can be installed in Parallel. Q: How long is the limiter sensor/clamp cable? The item “2000W Grid Tie Solar Inverters Power Limiter DC 45-90V AC 220V 230V SUN 2000GTIL” is in sale since Friday, September 4, 2020. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “ming721″ and is located in NingBo. This item can be shipped to North, South, or Latin America, all countries in Europe, Australia.

Current Rating: 21-30 A
Model: SUN-2000GTIL-LCD
Current Type: DC
System Configuration: Grid-Tie
Type: Charger/Inverter
Features: Automatic Voltage Detection
MPN: SUN-2000GTIL-LCD
Power: 1801-2000 W
Current Output: 10 A or Less
Brand: SUN
Application: Home/Garden
Charging Mode: MPPT (Maximum Power Point Tracking)
Voltage: 45-90V

Incoming search terms:

sun-2000 gtil limit sensor

Category: 2000w | Comments Off

October 15

2000W 3 Phase Wind Turbine Grid Tie Inverter Limiter AC 45-90V SUN 2000GTIL WAL

New Grid Tie Inverter for 3 Phase Wind Turbines. Built-in Dump Load Controller – three phase AC input from wind turbine – Single Phase AC to Grid (100V 110V 120V 220V 230V 240V) – Built-in Power Limit Function. About the Input Voltage. DC 22-65V or 45-90V The DC input range of the wind inverter , the test point should be at the DC side of the built-in rectifier of the inverter, but you can calculate from 3 phases of AC output voltage of the wind turbine to get the DC voltage, the formula is Vac = Vdc/1.732. For example, if the DC input voltage range of the inverter is 4590V, then the wind turbine’s output AC range of the should be 45/1.73290/1.732 = AC 26V 52V. The wind inverter must work with 3 phase AC model wind turbine , there should be 3 wires from the wind turbine. Another way , if the wind turbine is used to charge 24v battery , please select 22-65V inverter. If the wind turbine is used to charge 48v battery , and the highest voltage low than 65v , please select 22-65V inverter. If the 48v wind turbine highest voltage over 65v , and low than 90v , please select 45-90V inverter. Advantage Features of the 2G Wind Power Grid Tie Inverter. The 2nd Generation grid tie inverter, new technical , Higher efficiency. Higher MPPT efficiency , Max 99% Multiple intelligent protection to ensure safe use. Directly connect to three phase wind turbine, without regulator Easy to install and easy to operate. The Electric meter will SLOW down. The wind grid tie power inverter can obtain the wind energy from wind turbine, and can tie to the grid through its output cables with no extra equipment. The installation is very convenient and reliable. The inverter can be connected to any outlets of utility grid at house. The small grid tie inverter monitors the volume, frequency and phase of the home utility grid, then produce pure sine wave AC power that the frequency and phase are as same as the grid’s, and the volume is a bit higher than the grid’s, then according to the current controlled PWM, to control the output power to the grid. The small grid tie inverter just puts out power when the home grid is on. When the wind turbine is rotating, and the output of the voltage is in the range of the rated input voltage of the inverter, the wind turbine will produces power, and the grid tie inverter will change the power from wind turbine to the home grid. When the total power of electric apparatus that are using in the house is larger than the output power of the inverters, these power from the inverters will be consumed in the house, this will slow down the power meter, otherwise, the difference of the output power of the inverter between the total used power of the apparatus will go out from the house to the out grid. Why our grid tie inverters need limit function? — It is in response to the overwhelming clamor from our customers for a function that can control the amount of power that the grid tie inverters can generate. With this function, the inverters will just generate power that is not larger than the loads power even the inverters are connected with big power solar panel array, we call it limit function. Because in some countries, the producer pays for the excess power it gives to the distribution grid. This is because the electric power meter(the one provided by the electricity provider in the area) is not aware of the direction of power flow. In other words it only adds even if power is exported to the grid, thus, the consumer will be charged for power even if it is given to the grid, and this is the problem. Our SUN G2 series grid tie inverters are integrated this limit function, so SUN G2 series inverters can work in limit mode or normal mode(no limit), you can make the configuration on the LCD display. Input AC/DC Voltage Range. DC 45V 90V (after regulator). AC Output Voltage Range. Dimensions (W x H x D). 469 x 196 x 88 mm. (1) (2) Dump load resistor connection Terminal. This terminals will connect to the dump load resistor. (3) AC socket, This socket will connect the inverter to the public grid via the AC cable. This terminals will connect to the wind turbine. Wind power grid tie inverter —- 1pcs , 2. Dump load resistor —1pcs , 3. AC cable –1pcs , 4. Limiter sensor/clamp / cable —- optional. Q: Can this inverter work if power off? Grid tie inverter will stop to work if the grid is off. Q :Can this inverter be connected in Parallel? A : Yes, the grid tie inverter is stackable. You may connect two or more inverters to one big wind turbine. Certification : CE Rohs EN50438. GAIA NEW ENERGY is your trusted partner for long term business. We arethe MANUFACUTER of the solar inverter. We are responsible forthe quality of the inverter. The inverter has 2 years guarantee. All return items must be in their original condition. Please do contact with us for return address, details and any other issues. Learning about the duty policy. Please leave us message if you have any question, we will reply in 24 hours, thank you! The item “2000W 3 Phase Wind Turbine Grid Tie Inverter Limiter AC 45-90V SUN 2000GTIL WAL” is in sale since Sunday, September 13, 2020. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “ming721″ and is located in NingBo. This item can be shipped to North, South, or Latin America, all countries in Europe, Australia.

Current Rating: 21-30 A
Model: SUN-2000GTIL-LCD
Current Type: DC
System Configuration: Grid-Tie
Power Source: Wind
Type: Charger/Inverter
Features: Automatic Voltage Detection
MPN: SUN-2000GTIL-LCD
Power: 1801-2000 W
Current Output: 10 A or Less
Brand: SUN
Application: Home/Garden
Charging Mode: MPPT (Maximum Power Point Tracking)
Voltage: 45-90V

Category: 2000w | Comments Off

September 20

2000W Solar Grid Tie Inverter with Power Limiter Sensor DC45-90V to AC190-260V

2000W MPPT Grid Tie Inverter with Power Limiter Stackable DC45-90V to AC190-260V. Why we produced the GRID TIE INVERTER WITH LIMITER? It is in response to the overwhelming clamor from our customers for a product that can control the amount of power that the grid tie inverters (GTI) can generate so that the amount of excess power produced by the solar panels are reduced to insignificant levels, if not eliminated — because in some countries, the producer pays for the excess power it gives to the distribution grid. This is because the electric power meters (the one provided by the electricity provider in the area) are not aware of the direction of power flow. In other words it only adds even if power is exported to the grid, thus, the consumers will be charged for power even if it is given to the grid, and this is the problem. This is the 2nd generation grid tie inverter with limiter. But in case customer install inverter far away from the main circuit breaker, we also enable the 2nd GTIL work with stand-alone limiter, we call this-external limiter. For sure, the inverter can work under normal Grid tie-no limit mode, just set on the nice LCD and save your setting. New upgraded firmware enable battery or solar limiter current and power model. User can set the maximum output power of inverter , this can make the inverter work at cooler contition as user want and extend the lifespan of the inverter. User can set kick in/off voltage of the inverter which can flexible using with battery bank depend on users mind and can prevent battery bank from over discharged. Continuous Power Output1950W Peak Power Output2000W Input DC Voltage Range45V 90V Peak power tracking voltage50V-90V AC Output Voltage Range190VAC 260VAC Output Frequency46Hz65Hz Standby Power Consumption. How to use the Inverter? Standard Grid Tie Inverter Model. More than 1 unit inverters stackable. The Grid Tie inverter converts DC power produced by Solar Panels to AC, connects to the grid and feed all of the power available from the panels to the AC load. All excess power that is not needed by the load is then exported to the Grid. If the Grid fails, then the Grid Tie Inverter will turn off. When the Grid comes back on line. The Grid Tie Inverter will again supply power to the load and any excess power is exported to the Grid again. If the Solar Panel is producing less power and the GTI cannot deliver all the power needed by the load, then power will be supplemented by the Grid. Power Meters (Except smart meter) are not aware of the direction of Power flow. The user then pays for the power exported and delivered by the Grid. Using Grid Tie Inverter With Limiter Model. The Grid Tie Inverter with Limiter delivers only the power needed by the load and prevents delivering excess power hence avoids excess power in going back to the Grid. The heart of the Grid Tie Inverter with Limiter is the Limiter Module (LM). The LM continuously sampled the power needed by the load through the current sensor connected after the Main Circuit Breaker. The LM then will process the signal. It then sends signal to Grid Tie Inverter how much power to deliver to the load in real time. The user, after installing and connecting the GTIL correctly, need not do anything and the unit will do its work automatically. Installation of GTIL With Internal Limiter. This installation is not require an additional limiter module, Installation is much easier. Clamp the current sensor cable to the hot wire to measure the current, the internal limiter will auto detect the load power and control the inverter output power, excess power will be well controlled. External protective device including dc and ac SPD(Surge protection device), dc and ac breaker, etc is recommended to installed in the system. Limiter Setting on the LCD of the inverter. The GTIL include three working mode:Work as normal GTI without power limitation. Work under Internal limiter mode and Work under External limiter mode, Pls make your setting on the LCD and save it, details setting operation, pls read the GTI manual. 5 Battery Discharge Power Mode. 6 Limiter Module Specification. Clamp sensor- Max 100A. Clamp sensor signal- 5v AC max mA. DC signal Cable- 5v DC, max mA. 1 x Solar Grid Inverter with Limiter 1 x Internal type Limiter clamp with sensor & 2m cable 1 x English User Manual. Sellers are not responsible for service transit time. Transit times are provided by the carrier, exclude weekends and holidays, and may vary with package origin and destination, particularly during peak periods. (Only for Business Express). Feedback is very important to us. Please do not give us any bad feedback. If you can do as we say, we will be very grateful. Please give us the opportunity to resolve any problem. The item “2000W Solar Grid Tie Inverter with Power Limiter Sensor DC45-90V to AC190-260V” is in sale since Friday, August 14, 2020. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “eprec-us” and is located in shenzhen. This item can be shipped worldwide.

Output Wave Form: Pure Sine Wave
MPPT Function: Yes
Stackable: Yes
Model: Grid Tie Inverter with Power Limiter
Color: Blue
MPN: Does not apply
Recommended Environment: Indoor
Brand: Y&H
Application: Home/Garden
Inverter Technology: Microinverter
Country/Region of Manufacture: China
System Configuration: Grid-Tie
Power Source: Solar
Power: 2000W
Charging Mode: MPPT (Maximum Power Point Tracking)
Continuous Power Output: 1950W
Peak Power Output: 2000W
Input DC Voltage Range: 45V ~ 90V
AC Output Voltage Range: 190VAC ~ 260VAC
Voltage: DC45-90V
Output Frequency: 46Hz~65Hz

Category: 2000w | Comments Off

September 8

2000W Battery Discharge Power Mode/MPPT Solar Grid Tie Inverter with Limiter Sen

2000W Battery Discharge Power Mode/MPPT Solar Grid Tie Inverter with Limiter Sensor DC 45-90V AC 220V 230V 240V PV connected. 6 years Store on Aliexpress. For new energy products , we are more professional. 2000w Solar Power Grid Tie Inverter. With Limiter / Sensor , Battery Discharge function. AC 220V 230V 240V (auto selected). For USA 240VAC connection , please see photo below. Why we produced the GRID TIE INVERTER WITH LIMITER? It is in response to the overwhelming clamor from our customers for a product that can control the amount of power that the grid tie inverters (GTI) can generate so that the amount of excess power produced by the solar panels are reduced to insignificant levels, if not eliminated — because in some countries, the producer pays for the excess power it gives to the distribution grid. This is because the electric power meters (the one provided by the electricity provider in the area) are not aware of the direction of power flow. In other words it only adds even if power is exported to the grid, thus, the consumers will be charged for power even if it is given to the grid, and this is the problem. This is the 2nd generation grid tie inverter with limiter. But in case customer install inverter far away from the main circuit breaker, we also enable the 2nd GTIL work with stand-alone limiter, we call this-external limiter. For sure, the inverter can work under normal Grid tie-no limit mode, just set on the nice LCD and save your setting. New upgraded firmware enable battery or solar limiter current and power model. User can set the maximum output power of inverter , this can make the inverter work at cooler contition as user want and extend the lifespan of the inverter. User can set kick in/off voltage of the inverter which can flexible using with battery bank depend on users mind and can prevent battery bank from over discharged. Input DC Voltage Range. Peak power tracking voltage. AC Output Voltage Range. Dimensions (W x H x D). A: DC input , for solar panels connection. B: Connector for external limiter. C: Connector for internal limiter. D: AC output , use AC cable to connect to home grid. Solar Grid Inverter with Limiter(built-in)—–1unit. Internal type Limiter clamp with sensor & 2m cable—-1pcs. The output connection needs to be custom order , connect the L/N to US 240VAC , L and L (any two L wire). How to use the Inverter? Standard Grid Tie Inverter Model. More than 1 unit inverters stackable. The Grid Tie inverter converts DC power produced by Solar Panels to AC, connects to the grid and feed all of the power available from the panels to the AC load. All excess power that is not needed by the load is then exported to the Grid. If the Grid fails, then the Grid Tie Inverter will turn off. When the Grid comes back on line. The Grid Tie Inverter will again supply power to the load and any excess power is exported to the Grid again. If the Solar Panel is producing less power and the GTI cannot deliver all the power needed by the load, then power will be supplemented by the Grid. Power Meters (Except smart meter) are not aware of the direction of Power flow. The user then pays for the power exported and delivered by the Grid. Using Grid Tie Inverter With Limiter Model. 2.1 The Grid Tie Inverter with Limiter delivers only the power needed by the load and prevents delivering excess power hence avoids excess power in going back to the Grid. 2.2 The heart of the Grid Tie Inverter with Limiter is the Limiter Module (LM). The LM continuously sampled the power needed by the load through the current sensor connected after the Main Circuit Breaker. The LM then will process the signal. It then sends signal to Grid Tie Inverter how much power to deliver to the load in real time. 2.3 The user, after installing and connecting the GTIL correctly, need not do anything and the unit will do its work automatically. Installation of GTIL With Internal Limiter. 3.1 This installation is not require an additional limiter module, Installation is much easier. Clamp the current sensor cable to the hot wire to measure the current, the internal limiter will auto detect the load power and control the inverter output power, excess power will be well controlled. 3.2 External protective device including dc and ac SPD(Surge protection device), dc and ac breaker, etc is recommended to installed in the system. Limiter Setting on the LCD of the inverter. The GTIL include three working mode:Work as normal GTI without power limitation. Work under Internal limiter mode and Work under External limiter mode, Pls make your setting on the LCD and save it, details setting operation, pls read the GTI manual. 5 Battery Discharge Power Mode. 6 Limiter Module Specification. Clamp sensor- Max 100A. Clamp sensor signal- 5v AC max mA. DC signal Cable- 5v DC, max mA. Wifi Port for MPPT 1000W/2000W NEW SUN Solar Grid Tie Inverter. NOTE : this WIFI port must be ordered with 2nd Generation Grid Tie Inverters together. NOTE : It will be built-in side the inverter. NEW CE EN50438 Certification. GAIA NEW ENERGY is your trusted partner for long term business. We arethe MANUFACUTER of the solar inverter. We are responsible forthe quality of the inverter. The inverter has 2 years. All return items must be in their original condition. Please do contact with us for return address, details and any other issues. Please leave us message if you have any question, we will reply in 24 hours, thank you! We reserve the right to cancel any order for any reason at any time. We are not responsible for undeliverable addresses. Orders are tracked and sent from China. Your feedback very important to us, after you get your package and you are. Satisfied with our service. If you have any problem with your order / any questions please before leave any type of feedback. Thank you for shopping at our store. The item “2000W Battery Discharge Power Mode/MPPT Solar Grid Tie Inverter with Limiter Sen” is in sale since Wednesday, June 3, 2020. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “anita-likes” and is located in China. This item can be shipped to United States.

Manufacturer: manufacturer
Model: model
Brand: FIG
UPC: 705353126215
ISBN: Does not apply
EAN: Does not apply
MPN: Does not apply
is_customized: Yes
Weight: 6kg
Brand Name: FIG
Model Number: GAIA-2000GTIL2-LCD-B
Input Voltage: 45-90vdc
Output Power: MAX 2000W
Output Type: Single
Output Voltage: 185v-265v
Stackable: Yes
Size: 434x196x88mm
Type: DC/AC Inverters
Output Current: 10A
Output Frequency: 50hz 60hz auto

Category: 2000w | Comments Off

August 31

2000W Grid Tie Inverter with Limiter Sensor MPPT Stackable DC45-90V to AC190-260

2000W Grid Tie Inverter with Limiter Sensor MPPT Stackable DC45-90V to AC190-260V. The grid tie power inverter is the most efficiency and technologically advanced inverter for solar power system. Low cost and easy installation–it can make full use of all types of buildings surface that face to the sun in the city as well as fast and easy installation of solar modules and grid tie inverter. Big LCD display, all adjustable parameter. Free combination — it can be used as a separate grid tie system and can be setup as a large solar array with many of them. Improving the efficiency of the entire solar power system– Because of MPPT function. So every panel is working at the maximum. Low power consumption, over current protection, over temperature protection, reverse polarity protection, etc. Why we produced the GRID TIE INVERTER WITH LIMITER? It is in response to the overwhelming clamor from our customers for a product that can control the amount of power that the grid tie inverters (GTI) can generate so that the amount of excess power produced by the solar panels are reduced to insignificant levels, if not eliminated — because in some countries, the producer pays for the excess power it gives to the distribution grid. This is because the electric power meters (the one provided by the electricity provider in the area) are not aware of the direction of power flow. In other words it only adds even if power is exported to the grid, thus, the consumers will be charged for power even if it is given to the grid, and this is the problem. This is the 2nd generation grid tie inverter with limiter. But in case customer install inverter far away from the main circuit breaker, we also enable the 2nd GTIL work with stand-alone limiter, we call this-external limiter. For sure, the inverter can work under normal Grid tie-no limit mode, just set on the nice LCD and save your setting. New upgraded firmware enable battery or solar limiter current and power model. User can set the maximum output power of inverter , this can make the inverter work at cooler contition as user want and extend the lifespan of the inverter. User can set kick in/off voltage of the inverter which can flexible using with battery bank depend on users mind and can prevent battery bank from over discharged. Continuous Power Output1950W Peak Power Output2000W Input DC Voltage Range45V 90V Peak power tracking voltage50V-90V AC Output Voltage Range190VAC 260VAC Output Frequency46Hz65Hz Standby Power Consumption. A: DC input , for solar panels connection. B: Connector for external limiter. C: Connector for internal limiter. D: AC output , use AC cable to connect to home grid. How to use the Inverter? Standard Grid Tie Inverter Model. More than 1 unit inverters stackable. The Grid Tie inverter converts DC power produced by Solar Panels to AC, connects to the grid and feed all of the power available from the panels to the AC load. All excess power that is not needed by the load is then exported to the Grid. If the Grid fails, then the Grid Tie Inverter will turn off. When the Grid comes back on line. The Grid Tie Inverter will again supply power to the load and any excess power is exported to the Grid again. If the Solar Panel is producing less power and the GTI cannot deliver all the power needed by the load, then power will be supplemented by the Grid. Power Meters (Except smart meter) are not aware of the direction of Power flow. The user then pays for the power exported and delivered by the Grid. Using Grid Tie Inverter With Limiter Model. The Grid Tie Inverter with Limiter delivers only the power needed by the load and prevents delivering excess power hence avoids excess power in going back to the Grid. The heart of the Grid Tie Inverter with Limiter is the Limiter Module (LM). The LM continuously sampled the power needed by the load through the current sensor connected after the Main Circuit Breaker. The LM then will process the signal. It then sends signal to Grid Tie Inverter how much power to deliver to the load in real time. The user, after installing and connecting the GTIL correctly, need not do anything and the unit will do its work automatically. Installation of GTIL With Internal Limiter. This installation is not require an additional limiter module, Installation is much easier. Clamp the current sensor cable to the hot wire to measure the current, the internal limiter will auto detect the load power and control the inverter output power, excess power will be well controlled. External protective device including dc and ac SPD(Surge protection device), dc and ac breaker, etc is recommended to installed in the system. Limiter Setting on the LCD of the inverter. The GTIL include three working mode:Work as normal GTI without power limitation. Work under Internal limiter mode and Work under External limiter mode, Pls make your setting on the LCD and save it, details setting operation, pls read the GTI manual. 5 Battery Discharge Power Mode. 6 Limiter Module Specification. Clamp sensor- Max 100A. Clamp sensor signal- 5v AC max mA. DC signal Cable- 5v DC, max mA. 1 x Solar Grid Inverter with Limiter 1 x AC cable 1 x Internal type Limiter clamp with sensor & 2m cable 1 x English User Manual. Sellers are not responsible for service transit time. Transit times are provided by the carrier, exclude weekends and holidays, and may vary with package origin and destination, particularly during peak periods. (Only for Business Express). Feedback is very important to us. Please do not give us any bad feedback. If you can do as we say, we will be very grateful. Please give us the opportunity to resolve any problem. The item “2000W Grid Tie Inverter with Limiter Sensor MPPT Stackable DC45-90V to AC190-260″ is in sale since Monday, July 20, 2020. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “maihuiyan” and is located in shenzhen. This item can be shipped worldwide.

Model: 2000W Grid Tie Inverter with Limiter Sensor
Color: Blue
MPN: Does Not Apply
Recommended Environment: Indoor
Brand: Y&H
Application: Home/Garden
Inverter Technology: Microinverter
Country/Region of Manufacture: China
System Configuration: Grid-Tie
Power Source: Solar
MPPT Function: Yes
Stackable: Yes
Input DC Voltage Range: 45V ~ 90V
Peak power tracking voltage: 50V-90V
AC Output Voltage Range: 190VAC ~ 260VAC
Output Frequency: 46Hz~65Hz
Output Wave Form: Pure Sine Wave
Power: 2000W
Voltage: DC45-90V

Category: 2000w | Comments Off

August 25

2000W Grid Tie Inverter with Power Limiter MPPT Stackable DC45-90V to AC190-260V

2000W Grid Tie Inverter with Power Limiter MPPT Stackable DC45-90V to AC190-260V. Why we produced the GRID TIE INVERTER WITH LIMITER? It is in response to the overwhelming clamor from our customers for a product that can control the amount of power that the grid tie inverters (GTI) can generate so that the amount of excess power produced by the solar panels are reduced to insignificant levels, if not eliminated — because in some countries, the producer pays for the excess power it gives to the distribution grid. This is because the electric power meters (the one provided by the electricity provider in the area) are not aware of the direction of power flow. In other words it only adds even if power is exported to the grid, thus, the consumers will be charged for power even if it is given to the grid, and this is the problem. This is the 2nd generation grid tie inverter with limiter. But in case customer install inverter far away from the main circuit breaker, we also enable the 2nd GTIL work with stand-alone limiter, we call this-external limiter. For sure, the inverter can work under normal Grid tie-no limit mode, just set on the nice LCD and save your setting. New upgraded firmware enable battery or solar limiter current and power model. User can set the maximum output power of inverter , this can make the inverter work at cooler contition as user want and extend the lifespan of the inverter. User can set kick in/off voltage of the inverter which can flexible using with battery bank depend on users mind and can prevent battery bank from over discharged. Continuous Power Output1950W Peak Power Output2000W Input DC Voltage Range45V 90V Peak power tracking voltage50V-90V AC Output Voltage Range190VAC 260VAC Output Frequency46Hz65Hz Standby Power Consumption. How to use the Inverter? Standard Grid Tie Inverter Model. More than 1 unit inverters stackable. The Grid Tie inverter converts DC power produced by Solar Panels to AC, connects to the grid and feed all of the power available from the panels to the AC load. All excess power that is not needed by the load is then exported to the Grid. If the Grid fails, then the Grid Tie Inverter will turn off. When the Grid comes back on line. The Grid Tie Inverter will again supply power to the load and any excess power is exported to the Grid again. If the Solar Panel is producing less power and the GTI cannot deliver all the power needed by the load, then power will be supplemented by the Grid. Power Meters (Except smart meter) are not aware of the direction of Power flow. The user then pays for the power exported and delivered by the Grid. Using Grid Tie Inverter With Limiter Model. The Grid Tie Inverter with Limiter delivers only the power needed by the load and prevents delivering excess power hence avoids excess power in going back to the Grid. The heart of the Grid Tie Inverter with Limiter is the Limiter Module (LM). The LM continuously sampled the power needed by the load through the current sensor connected after the Main Circuit Breaker. The LM then will process the signal. It then sends signal to Grid Tie Inverter how much power to deliver to the load in real time. The user, after installing and connecting the GTIL correctly, need not do anything and the unit will do its work automatically. Installation of GTIL With Internal Limiter. This installation is not require an additional limiter module, Installation is much easier. Clamp the current sensor cable to the hot wire to measure the current, the internal limiter will auto detect the load power and control the inverter output power, excess power will be well controlled. External protective device including dc and ac SPD(Surge protection device), dc and ac breaker, etc is recommended to installed in the system. Limiter Setting on the LCD of the inverter. The GTIL include three working mode:Work as normal GTI without power limitation. Work under Internal limiter mode and Work under External limiter mode, Pls make your setting on the LCD and save it, details setting operation, pls read the GTI manual. 5 Battery Discharge Power Mode. 6 Limiter Module Specification. Clamp sensor- Max 100A. Clamp sensor signal- 5v AC max mA. DC signal Cable- 5v DC, max mA. 1 x Solar Grid Inverter with Limiter 1 x Internal type Limiter clamp with sensor & 2m cable 1 x English User Manual. Sellers are not responsible for service transit time. Transit times are provided by the carrier, exclude weekends and holidays, and may vary with package origin and destination, particularly during peak periods. (Only for Business Express). Feedback is very important to us. Please do not give us any bad feedback. If you can do as we say, we will be very grateful. Please give us the opportunity to resolve any problem. The item “2000W Grid Tie Inverter with Power Limiter MPPT Stackable DC45-90V to AC190-260V” is in sale since Friday, July 24, 2020. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “solarlive03yh” and is located in shenzhen. This item can be shipped to United States, all countries in Europe, all countries in continental Asia, Canada, Mexico, Australia.

Model: 2000W Limiter Grid Tie Inverter
Output Frequency: 46Hz~65Hz
Output Wave Form: Pure Sine Wave
MPPT Function: Yes
Color: Blue
MPN: Does not apply
Brand: Y&H
Country/Region of Manufacture: China
Wattage: 2000W
System Configuration: Grid-Tie
Stackable: Yes
Continuous Power Output: 1950W
Peak Power Output: 2000W
Input DC Voltage Range: 45V ~ 90V
Peak power tracking voltage: 50V-90V
AC Output Voltage Range: 190VAC ~ 260VAC
Voltage: DC45-90V

Category: 2000w | Comments Off

August 8

2000W MPPT Solar Grid Tie InverterLimiter/Wifi Port DC 45-90V To 220V PV Kit US

Max input DC voltage. Peak power tracking voltage. 47.5-51.5 for 50hz; 59.3-60.5 for 60hz. Just for AC output. 20’C — +85’C. The item “2000W MPPT Solar Grid Tie InverterLimiter/Wifi Port DC 45-90V To 220V PV Kit US” is in sale since Thursday, July 2, 2020. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “remember_the_magic” and is located in Goldsboro, North Carolina. This item can be shipped to United States.

Inverter Technology: Microinverter
Wattage: 2000W
System Configuration: Grid-Tie
Power Source: Solar
Type: Charger/Inverter
Features: Limiter Sensor/Clamp
Color: Blue
MPN: SUN-2000GTIL2-WIFI Plug-LCD
Recommended Environment: Indoor
Voltage Input: DC 45-90V
Voltage Output: AC 220V(190V~260V)
Protection Properties: Anti-Island Protection
Brand: iMeshbean
Voltage: 45-90v

Category: 2000w | Comments Off

July 28

2000W MPPT Grid Tie Inverter with Power Limiter Stackable DC45-90V to AC190-260V

2000W MPPT Grid Tie Inverter with Power Limiter Stackable DC45-90V to AC190-260V. Why we produced the GRID TIE INVERTER WITH LIMITER? It is in response to the overwhelming clamor from our customers for a product that can control the amount of power that the grid tie inverters (GTI) can generate so that the amount of excess power produced by the solar panels are reduced to insignificant levels, if not eliminated — because in some countries, the producer pays for the excess power it gives to the distribution grid. This is because the electric power meters (the one provided by the electricity provider in the area) are not aware of the direction of power flow. In other words it only adds even if power is exported to the grid, thus, the consumers will be charged for power even if it is given to the grid, and this is the problem. This is the 2nd generation grid tie inverter with limiter. But in case customer install inverter far away from the main circuit breaker, we also enable the 2nd GTIL work with stand-alone limiter, we call this-external limiter. For sure, the inverter can work under normal Grid tie-no limit mode, just set on the nice LCD and save your setting. New upgraded firmware enable battery or solar limiter current and power model. User can set the maximum output power of inverter , this can make the inverter work at cooler contition as user want and extend the lifespan of the inverter. User can set kick in/off voltage of the inverter which can flexible using with battery bank depend on users mind and can prevent battery bank from over discharged. Continuous Power Output1950W Peak Power Output2000W Input DC Voltage Range45V 90V Peak power tracking voltage50V-90V AC Output Voltage Range190VAC 260VAC Output Frequency46Hz65Hz Standby Power Consumption. A: DC input , for solar panels connection. B: Connector for external limiter. C: Connector for internal limiter. D: AC output , use AC cable to connect to home grid. How to use the Inverter? Standard Grid Tie Inverter Model. More than 1 unit inverters stackable. The Grid Tie inverter converts DC power produced by Solar Panels to AC, connects to the grid and feed all of the power available from the panels to the AC load. All excess power that is not needed by the load is then exported to the Grid. If the Grid fails, then the Grid Tie Inverter will turn off. When the Grid comes back on line. The Grid Tie Inverter will again supply power to the load and any excess power is exported to the Grid again. If the Solar Panel is producing less power and the GTI cannot deliver all the power needed by the load, then power will be supplemented by the Grid. Power Meters (Except smart meter) are not aware of the direction of Power flow. The user then pays for the power exported and delivered by the Grid. Using Grid Tie Inverter With Limiter Model. The Grid Tie Inverter with Limiter delivers only the power needed by the load and prevents delivering excess power hence avoids excess power in going back to the Grid. The heart of the Grid Tie Inverter with Limiter is the Limiter Module (LM). The LM continuously sampled the power needed by the load through the current sensor connected after the Main Circuit Breaker. The LM then will process the signal. It then sends signal to Grid Tie Inverter how much power to deliver to the load in real time. The user, after installing and connecting the GTIL correctly, need not do anything and the unit will do its work automatically. Installation of GTIL With Internal Limiter. This installation is not require an additional limiter module, Installation is much easier. Clamp the current sensor cable to the hot wire to measure the current, the internal limiter will auto detect the load power and control the inverter output power, excess power will be well controlled. External protective device including dc and ac SPD(Surge protection device), dc and ac breaker, etc is recommended to installed in the system. Limiter Setting on the LCD of the inverter. The GTIL include three working mode:Work as normal GTI without power limitation. Work under Internal limiter mode and Work under External limiter mode, Pls make your setting on the LCD and save it, details setting operation, pls read the GTI manual. 5 Battery Discharge Power Mode. 6 Limiter Module Specification. Clamp sensor- Max 100A. Clamp sensor signal- 5v AC max mA. DC signal Cable- 5v DC, max mA. 1 x Solar Grid Inverter with Limiter 1 x AC cable 1 x Internal type Limiter clamp with sensor & 2m cable 1 x English User Manual. Sellers are not responsible for service transit time. Transit times are provided by the carrier, exclude weekends and holidays, and may vary with package origin and destination, particularly during peak periods. (Only for Business Express). Feedback is very important to us. Please do not give us any bad feedback. If you can do as we say, we will be very grateful. Please give us the opportunity to resolve any problem. The item “2000W MPPT Grid Tie Inverter with Power Limiter Stackable DC45-90V to AC190-260V” is in sale since Wednesday, July 22, 2020. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “eprec-us” and is located in shenzhen. This item can be shipped worldwide.

Type: Grid Tie Inverter with Limiter Sensor
MPN: Does not apply
Brand: Y&H
Application: Home/Garden
Inverter Technology: Microinverter
Country/Region of Manufacture: China
Wattage: 2000W
System Configuration: Grid-Tie
Power Source: Solar
MPPT Function: Yes
Stackable: Yes
Input DC Voltage Range: 45V ~ 90V
Peak power tracking voltage: 50V-90V
AC Output Voltage Range: 190VAC ~ 260VAC
Output Frequency: 46Hz~65Hz
Output Wave Form: Pure Sine Wave
Charging Mode: MPPT (Maximum Power Point Tracking)
Voltage: DC45-90V

Category: 2000w | Comments Off

May 2025
M	T	W	T	F	S	S
« Apr
			1	2	3	4
5	6	7	8	9	10	11
12	13	14	15	16	17	18
19	20	21	22	23	24	25
26	27	28	29	30	31