March 14

Solar Micro Inverter 1200W Grid Tie MPPT Pure Sine Wave DC to AC 110V Waterproof

Solar-Micro-Inverter-1200W-Grid-Tie-MPPT-Pure-Sine-Wave-DC-to-AC-110V-Waterproof-01-hh Solar Micro Inverter 1200W Grid Tie MPPT Pure Sine Wave DC to AC 110V Waterproof
Solar Micro Inverter 1200W Grid Tie MPPT Pure Sine Wave DC to AC 110V Waterproof
Solar Micro Inverter 1200W Grid Tie MPPT Pure Sine Wave DC to AC 110V Waterproof
Solar Micro Inverter 1200W Grid Tie MPPT Pure Sine Wave DC to AC 110V Waterproof
Solar Micro Inverter 1200W Grid Tie MPPT Pure Sine Wave DC to AC 110V Waterproof
Solar Micro Inverter 1200W Grid Tie MPPT Pure Sine Wave DC to AC 110V Waterproof
Solar Micro Inverter 1200W Grid Tie MPPT Pure Sine Wave DC to AC 110V Waterproof
Solar Micro Inverter 1200W Grid Tie MPPT Pure Sine Wave DC to AC 110V Waterproof
Solar Micro Inverter 1200W Grid Tie MPPT Pure Sine Wave DC to AC 110V Waterproof
Solar Micro Inverter 1200W Grid Tie MPPT Pure Sine Wave DC to AC 110V Waterproof
Solar Micro Inverter 1200W Grid Tie MPPT Pure Sine Wave DC to AC 110V Waterproof
Solar Micro Inverter 1200W Grid Tie MPPT Pure Sine Wave DC to AC 110V Waterproof

Solar Micro Inverter 1200W Grid Tie MPPT Pure Sine Wave DC to AC 110V Waterproof
MPPT Technology: Precise maximum power point tracking. MPPT algorithm can optimize the power collection from solar panels. It accurately captures and collects sunlight, and locks in the maximum output power points, significantly increasing over 25% of the power generation. With the monitoring system, it can help you monitor the power generation efficiency of the power station and reduce workforce expenses. High Performance: Reverse power transmission. With efficient reverse power transmission technology, the power transmission rate up to 99.9%. Full digital control can be achieved by using intelligent soft switching technology and built-in MCU for charging modules; Introducing high-frequency switching power supply and SPWM control technology. It features strong anti-interference ability, fast calculation speed, a high degree of intelligence, high control precision, and excellent output waveform. Protective & Reliable: IP65 waterproof design and aluminum alloy material can effectively prevent rainwater erosion on the surface. It provides electrical isolation, more reliable to use. It offers multiple protection functions, such as over-current protection, short circuit protection, low-voltage protection, over high voltage protection. Easy Operation: Lightweight and easy to install, many inverters can be stacked arbitrarily to form a single-phase parallel stacking system. Almost no maintenance work is required, clean the dust on the photovoltaic panel occasionally. Sustainable Use: This solar power grid-tie micro-inverter can convert DC power generated by solar panels into AC power. Our solar inverter provides sustainable energy and brings excellent environmental benefits. This is a Grid-Tie inverter, which means connecting the Grid power to the “AC output” would be necessary for Grid-tie power generation. Please check the voltage is 110V or 220V as well, different options according to the Grid voltage. If taking the solar panels as the input instead of batteries, “VOC” Voltage should be set in the range of 30-48V, the solar panels’ power is set 20% bigger than the inverter’s output power would be recommended. For the 600W inverter, the total solar panels’ total output power should be 700-750W. For the 1200W inverter, the total power should be 12001400W. If taking the battery packs as input, 36V battery packs would be firstly recommended, three 12V batteries are connecting in series to 36V would be fine. When wires the inverter, please follow the indication in the inverter, Pos (+) to Pos (+), Neg(-) to Neg (-). Regarding the battery’s capacity, 36V/10mah to 300W, 36V/20mah to the 600W inverter, and 36V/40-45mah to the 1200W inverter. Please check the configuration, input and output voltage are totally in the allowance, ensure the inverter could run normally and Grid to Grid generation. The robust MPPT algorithm can automatically track the power points and increase the power generation by 25%. With a real-time monitoring system, it can help you monitor power generation efficiency and reduce workforce expenses. Stable Dual Channel Technology. This inverter adopts the Dual Channel Circuit Technology, which means two photovoltaic panel inputs can share one MPPT system that keeps the power output and transmission stability. When working, these two channels will never interfere with each other while tracking the maximum power point, which efficiently makes the power transmission rate up to 99.9%. The digital SPWM control technology is characterized by strong anti-interference ability, fast calculation speed, high intelligent degree, high control precision, and excellent output waveform. IP65 & Aluminum Material. Introducing IP65 waterproof appearance design and aluminum alloy material, it is safe and reliable. Multiple protection functions are provided to prolong service life. Lightweight and easy to install, many inverters can be stacked arbitrarily to form a single-phase parallel stacking system. It is simple, whether installation or maintenance. It is suitable for various household appliances. It can convert the DC power generated by solar panels into AC power available for household appliances. 1200W 110V Solar Grid Tie Micro Inverter. High Efficiency & IP65 Waterproof & Aluminum Alloy Material. Efficiently turns sunlight into clean and green power. Our solar grid tie micro inverter employs MPPT technology, reverse power transmission, and digital control. It is designed to provide sufficient power to drive various household appliances. Moreover, it has a prolonged service life given its IP65 waterproof design and aluminum alloy structure. The first step on the sustainable energy path is energy conservation, and this inverter aims at achieving exactly this. Recommended input power: 1200W. Recommend the use of PV modules: 4 x 300W, 30-50VOC. Maximum input DC voltage: 54V. Peak power tracking voltage: 25-40V. Operating voltage range: 17-50V. Min/Max start voltage: 22-50V. Maximum DC short current: 80A. Maximum input current: 54.4A. Peak power output: 1200W. Rated output power: 1150W. Rated output current: 9.58A. Rated voltage range: 80-160VAC. Rated frequency range: 57-62.5 Hz. Maximum units per branch circuit: 3pcs (Single-phase). Static MPPT efficiency: 99.5%. Maximum output efficiency: 91.2%. Operating temperature range(inverter inside) : -40 to 82? 1 x 1200W Solar Grid Tie Micro Inverter. 1 x Tee connector. 1 x 1.5 m Power Cable. 1 x Set of Mounting Accessories. 1 x Product Manual. Recommend the use of PV modules. 2 x 300W, 30-50VOC. 4 x 300W, 30-50VOC. Maximum input DC voltage. Peak power tracking voltage. Maximum DC short current. 2.3A/4.58A/5A/9.58A/0.92A. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. Please be aware that. Please DO NOT fill in the PO Box address. California Warehouse: City of Industry, CA. New York State Warehouse: Perth Amboy, NJ. Georgia Warehouse: Austell, GA. North Carolina Warehouse: Grove NC. Oregon Warehouse: AIRPORT WAY Portland, OR. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. CA & TX & NJ & GA & NC &OR WAREHOUSE. All emails will be responded to within 12-24 hours. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “audiyeah-1″ and is located in this country: US. This item can be shipped to United States, Canada.
  • Type: Charger/Inverter
  • Color: As Shown on the Picture
  • Brand: VEVOR
  • MPN: NBQ1.2KW-110VWXBW
  • Model: 1200W Aolar Micro Inverter
  • Voltage: 110VAC
  • Power: 1200W
  • Current Rating: 22-50V
  • Current Type: AC
  • Resistance Properties: Waterproof
  • Current Output: 110VAC
  • Maximum Input Power: 54V
  • Recommended input power: 1200W
  • Maximum input DC voltage: 54V
  • Min/Max start voltage: 22-50V
  • Output power: 110VAC
  • Waterproof rating: IP65
  • Cooling: Self-cooling
  • Recommend the use of PV modules: 4 x 300W, 30-50VOC
  • Peak power tracking voltage: 25-40V
  • Operating voltage range: 17-50V
  • Maximum DC short current: 80A
  • Maximum input current: 54.4A
  • Peak power output: 1200W
  • Rated output power: 1150W
  • Rated output current: 9.58A
  • Rated voltage range: 80-160VAC
  • Rated frequency range: 57-62.5 Hz
  • Power factor: >99%
  • Maximum units per branch circuit: 3pcs (Single-phase)
  • Static MPPT efficiency: 99.5%
  • Maximum output efficiency: 91.2%
  • THD: <5%
  • Ambient temperature: -40 to 60 ℃
  • Nighttime power consumption: <1W
  • Operating temperature range(inverter inside): -40 to 82 ℃
  • UPC: 8085442537484

Solar Micro Inverter 1200W Grid Tie MPPT Pure Sine Wave DC to AC 110V Waterproof
Category: solar | Comments Off
March 14

700W Solar Grid Tie Micro Inverter Waterproof (IP65) WVC-700W

700W-Solar-Grid-Tie-Micro-Inverter-Waterproof-IP65-WVC-700W-01-nplm 700W Solar Grid Tie Micro Inverter Waterproof (IP65) WVC-700W
700W Solar Grid Tie Micro Inverter Waterproof (IP65) WVC-700W
700W Solar Grid Tie Micro Inverter Waterproof (IP65) WVC-700W
700W Solar Grid Tie Micro Inverter Waterproof (IP65) WVC-700W
700W Solar Grid Tie Micro Inverter Waterproof (IP65) WVC-700W
700W Solar Grid Tie Micro Inverter Waterproof (IP65) WVC-700W
700W Solar Grid Tie Micro Inverter Waterproof (IP65) WVC-700W
700W Solar Grid Tie Micro Inverter Waterproof (IP65) WVC-700W
700W Solar Grid Tie Micro Inverter Waterproof (IP65) WVC-700W
700W Solar Grid Tie Micro Inverter Waterproof (IP65) WVC-700W
700W Solar Grid Tie Micro Inverter Waterproof (IP65) WVC-700W
700W Solar Grid Tie Micro Inverter Waterproof (IP65) WVC-700W
700W Solar Grid Tie Micro Inverter Waterproof (IP65) WVC-700W

700W Solar Grid Tie Micro Inverter Waterproof (IP65) WVC-700W
700W NEW Solar Grid Tie Micro Inverter Waterproof (IP65) WVC-700W. An inverter can efficiently turn the direct current generated by solar panels into the alternating current used by household appliances. This micro inverter makes it easier. Made of fine aluminum alloy, this IP65 waterproof inverter has a wide range of functions, good safety, convenient installation, and high-cost performance. We believe this inverter will not disappoint you. The inverter is made of aluminum alloy, which is durable, corrosion-resistant, and not easy to rust. You can use it for a long time without frequent replacement, and your cost can be saved. The inverter has built-in high-precision maximum power point tracking, which can optimize the power collection from the solar panel, accurately capture and lock the maximum output power point, and greatly increase power generation to more than 25%. In addition, the efficient power reverse transmission technology can transmit the power that can not be used up to the grid in the reverse direction to other places for use, and the power transmission rate can reach 99.9%. The inverter is equipped with an LCD display screen to monitor voltage, power, frequency, current, etc. So you can see the machine clearly in operation. The inverter adopts intelligent soft switching technology, high-frequency switching power supply technology, and 32-bit DSP full digital SPWM control technology, making the product strong anti-interference ability, fast operation speed, high intelligence, and a powerful functional system, which can meet the needs of users. The output and input of the system are completely electrically isolated, the insulation performance of the entire power distribution system is good, and the fully isolated booster circuit is safer and more reliable. The inverter has six protection functions: over-temperature protection, under-voltage alarm, under-voltage protection, over-voltage protection, short circuit protection, overload protection, etc. Besides, the IP65 waterproof design can prevent rain from eroding its surface, so you can use it with confidence. After the installation of the power station, you don’t need to do maintenance work. After a long period of use, you only need to remove the dust from the photovoltaic panel. With a size of 8.392.289.84inch, the inverter adopts high-frequency telephone, micro processing, and other technologies, so it is smaller, lighter, and won’t occupy too much space. During installation, you can stack multiple inverters at will, form a single-phase parallel stacking system, or conveniently form a three-phase system to provide a three-phase AC. We have been working hard to provide better service and quality for our customers, which is our goal. If there is any quality problem with our inverters. The inverter is equipped with two gaskets to help you install the photovoltaic support, making the inverter more stable. The inverter is provided with heat dissipation holes, which can play a good role in heat dissipation and prolong the service life of the inverter. This product is applicable to 30V or 36V solar panels, 36V batteries. The inverter can be widely used in residential or commercial areas for turning the direct current generated by solar panels into alternating current. Step 1: Install the inverter on the support of the photovoltaic panel with the screws provided by the machine. Step 2: Connect the positive and negative poles of the DC connection plug on the photovoltaic panel to the DC input terminal of the inverter. Step 3: Open the waterproof cover of the AC output interface of the inverter and connect the AC cable to the AC waterproof plug. Step 4: Connect the AC output cable to the AC main cable. Step 5: Repeat steps 1 to 3 to install and connect all inverters. Step 6: Connect the AC main cable to the public grid and start your green energy journey. Plug Type: US Standard. Maximum Input DC Voltage: 54V. Peak Power Tracking Voltage: 22-45V. Operating Voltage Range: 17-50V. Min/Max Start-up Voltage: 22-50V. Maximum DC Short Circuit Current: 40A. Maximum Input Operating Current: 30A. Output Peak Power: 700watt. Rated Output Power: 650watt. Rated Output Current: 6.36A. Rated Voltage Range: 80-160VAC. Rated Frequency Range: 57-62.5Hz. Number of Circuit Connections Per String: 6. Static MPPT Efficiency: 99.5%. Maximum Output Efficiency: 91.2%. Night Time Power Loss. Communication Mode: Power Line Carrier. Power Transmission Mode: Reverse Transmission, Load Priority. Gross Weight: 2.48kg/5.47lbs. Net Weight: 1.63kg/3.59lbs. Product Size: 21.35.825cm/8.392.289.84inch. Package Size: 342411.5cm/13.399.454.53inch. 1 Solar Grid Tie Micro Inverter. Other Accessories for Installation. Please install the inverter correctly according to the instructions. If you have any questions, please contact the relevant personnel. Please don’t dismantle the machine. Only qualified maintenance personnel can repair the inverter. Please install the inverter in a place with low humidity and good ventilation to avoid overheating the inverter and remove the surrounding inflammable and explosives. When using this inverter, please take good care of your children to prevent them from touching and playing to avoid electric shock. Please note that our products are grid-connected, the AC output port has to be connected to the home grid in order to achieve grid-connected power generation. When the input load is with solar panels, it is important that the VOC voltage is between 30-48V. We recommend that the solar panel is configured for 20% more power than the power of the product. For example, if the product is 600W, the total power of the solar panels should be between 700-750W. When the input load is a battery, we recommend a battery voltage of 36V, which can be connected in series with 3 12V batteries. Please note that the positive and negative polarity should not be reversed when connecting the product. The recommended battery current is 36V/10mah for 300W, 36V/20mah for 600W, and 36V/40-45mah for 1200W. The input and output voltage of the configuration is within the normal operating voltage range of the product in order for the product to work properly and achieve grid-connected power generation. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement. Please make sure you do not mind before you order. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. Applicable to 30V or 36V solar panels, 36V batteries. Maximum Input DC Voltage. Peak Power Tracking Voltage. Maximum DC Short Circuit Current. Maximum Input Operating Current. Number of Circuit Connections Per String. Reverse Transmission, Load Priority. 21.35.825cm/8.392.289.84inch. Solar Grid Tie Micro Inverter. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “r-welcome-to-buy” and is located in this country: US. This item can be shipped to United States.
  • Manufacturer Warranty ( 制造商保修 ): Yes
  • Features: High quality W/ warranty!
  • Application: Applicable to 30V or 36V solar panels, 36V batteries
  • Current Output: /
  • Current Type: /
  • System Configuration: /
  • Current Rating: /
  • Charging Mode: /
  • Resistance Properties: /
  • Model: WVC-700W
  • Color: Silver
  • Material: Aluminium Alloy
  • Power: 700W
  • Voltage: 110V
  • Plug Type: US Standard
  • Maximum Input DC Voltage: 54V
  • Peak Power Tracking Voltage: 22-45V
  • Operating Voltage Range: 17-50V
  • Min/Max Start-up Voltage: 22-50V
  • Maximum DC Short Circuit Current: 40A
  • Maximum Input Operating Current: 30A
  • Output Peak Power: 700watt
  • Rated Output Power: 650watt
  • Rated Output Current: 6.36A
  • Rated Voltage Range: 80-160VAC
  • Rated Frequency Range: 57-62.5Hz
  • Power Factor: >99%
  • Number of Circuit Connections Per String: 6
  • Static MPPT Efficiency: 99.5%
  • Maximum Output Efficiency: 91.2%
  • Night Time Power Loss: <1W
  • Total Flow Distortion: <5%
  • Operating Temperature Range: ﹣40℃~60℃/﹣40℉~140℉
  • Waterproof Rating: IP65
  • Cooling Method: Self-cooling
  • Communication Mode: Power Line Carrier
  • Power Transmission Mode: Reverse Transmission, Load Priority
  • Product Size: 21.3*5.8*25cm/8.39*2.28*9.84inch
  • Brand: Unbranded
  • Type: Solar Grid Tie Micro Inverter

700W Solar Grid Tie Micro Inverter Waterproof (IP65) WVC-700W
Category: 700w | Comments Off