May
16
Micro Grid Tie Inverter 500W MPPT Solar Panels Adjutable Battery discharger
Micro Grid Tie Inverter 500W MPPT Solar Panels Adjutable Battery discharger. PV open voltage range. PV MAX input power(W). MPPT Voltage range(V). Suitable for Battery voltage(V). Battery Low Voltage Protection(V). PV mode AC MAX output (W). Battery mode Max output power. 250W(with14V or above). 220VAC(190-260VAC) or 120VAC(90-135VAC). 50Hz(4852) or 60Hz(5862). Stable real efficiency / 120V. Stable real efficiency / 220V. Islanding; Short-circuit; Low Voltage; Over Voltage; Over temperature Protection. Monocrystalline, polycrystalline, thin-film solar panels. 22.2×16.2×5.5CM. PV grid-connected inverter operating mode. The grid-tied inverter has an automated working order, without needing to monitor. On detection the power output from solar panels, device will decide if the power was large enough to begin the conversion process. Coversion process includes 5 modes, Startup, Grid-tied begin, Standby, Stop, Fault-find. Startup – When the start button is on, solar panel and grid lines both connected in normal condition, inverter enters working condition. Grid-tied begin – Grid-tied begin mode is when inverter starts to convert the Direct Current fed through from PV solar panel to a stable Alternate Current and flow to the utility grid. To enable the maximum output of energy, the device uses MPPT control technology to track sun rays, this technology promises the maximum efficiency under diferent daylight and temperature conditions. Standby – Standby mode is when device detects insufficient power feeding through from the solar panel, or device detects abnormal status such as voltages, frequencies, and temperatures not in the permitted range, the device enters standby mode. Stop – Insufficient sunlight hence insufficient PV power feeding through to the device and device enters into the standby mode, when this condition continues and DC voltages falls below 12V for over 1 minute, the device will enter Stop mode. When error ocurs, fault find indicator starts flashing, device will enter Stop mode. Please see 3.4 error status on LED indicator. Battery discharge and grid mode(With ADJ function models). The DC input of the system can be directly connected with the battery, Turn the knob of the inverter to the right into the battery mode, then the tracking function will be turned off, the output power will be adjusted from left to right, At this point the output power can be adjusted from 60W-350W or so arbitrary output to ensure that the inverter can work for a long time in the grid status. When the inverter connected to the battery discharge, if the battery voltage is too low, the inverter will automatically stop and cut off grid output to protect the battery over discharge to extend battery life. Different specifications of the input voltage of the inverter will be used with different voltage battery, the battery voltage protection point please refer to the following. Battery Low voltage protection. Battery high voltage protection. There may be some delays due to flight, holiday, weather, local post, local natural disaster impact. It must also be in the original packaging. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “rodonite-7″ and is located in this country: CN. This item can be shipped worldwide.
- Input Voltage: PV 16-28V Bat 12V
- Output Voltage: 220-240V
- Size: 30x23x13cm
- Current Rating: Other
- Inverter Technology: Microinverter
- Model: 4696954157
- Country/Region of Manufacture: China
- Connector Type: Other
- Maximum Input Power: Other
- Custom Bundle: No
- Wattage: Other
- Current Type: AC/DC
- System Configuration: Grid-Tie
- Material: Other
- Power Source: Solar
- Type: Charger/Inverter
- Features: Durable
- Color: Blue
- MPN: 4696954181
- Recommended Environment: Indoor/Outdoor
- Item Length: Standard
- Connector Configuration: Other
- Power: 500W
- Current Output: Other
- Brand: Unbranded
- Application: Agriculture/Farming
- Charging Mode: MPPT (Maximum Power Point Tracking)
- Weight: 1.8
- Is Smart Device: No
- Is_customized: Yes
- Output Frequency: 50/60HZ
- Output Power: 201 – 400KW
- Output Type: Single
- Resistance Properties: Other
- Voltage: 12V/24V36V/48V/72V