1000W Solar Grid Tie Inverter withPower Limiter DC45-90V Pure Sine Wave Inverter

1000W Solar Grid Tie Inverter w/Power Limiter DC45-90V Pure Sine Wave Inverter. Grid Tie Inverter DC Input 45-90V(Starting Voltage49.5V). Grid Tie Inverter with Limiter Sensor. Delivers only the power needed by the load. Voc (solar panel) must not exceed 90V to ensure good output efficiency. Battery discharge power mode, Can auto regulate depth of discharge of the battery bank. Micro Inverter Max Power Point Tracking and AC Stackable, Anti-island protection. Intelligent LCD display various parameters. 1000W Grid Tie Inverter converts DC power produced by Solar Panels to AC, connects to the grid and feed all of the power available from the panels to the AC load. Smart Micro inverter is synchronized and in-phase with the utility grid. The electric apparatus in the house will use power from the inverter first. If the Solar Panel is producing less power and the GTI cannot deliver all the power needed by the load, then power will be supplemented by the Grid. Why we produced the GRID TIE INVERTER WITH LIMITER? It is in response to the overwhelming clamor from our customers for a product that can control the amount of power that the grid tie inverters (GTI) can generate so that the amount of excess power produced by the solar panels are reduced to insignificant levels, if not eliminated — because in some countries, the producer pays for the excess power it gives to the distribution grid. This is because the electric power meters (the one provided by the electricity provider in the area) are not aware of the direction of power flow. In other words it only adds even if power is exported to the grid, thus, the consumers will be charged for power even if it is given to the grid, and this is the problem. This is the 2nd generation grid tie inverter with limiter. But in case customer install inverter far away from the main circuit breaker, we also enable the 2nd GTIL work with stand-alone limiter, we call this-external limiter. For sure, the inverter can work under normal Grid tie-no limit mode, just set on the nice LCD and save your setting. The 45-90V model inverter will start up at 49.5V, after starting, the voltage will drop to 45V, then inverter can work in 45-90V. Voc 60-90V solar panels in parallel is suggested. For example:Voc=36V solar panel, we suggest 2 panels in series, then connect 2 or more groups in parallel. Rated Power (Peak/Continuous): 1000W / 900W DC Input Voltage: 45V90V AC Output Voltage Range:110V/220V Auto Peak power tracking voltage: 49.582V AC Output Frequency Range: 46Hz65Hz Peak Inverter Efficiency: 92% Stackable: Just for AC Output Output Wareform: Pure sine wave. 1 x On Grid Inverter with Limiter(built-in) 1 x AC cable 1 x Internal type Limiter clamp with sensor & 2m cable 1 x English User Manual. Stackable connectionThe purpose is let small power inverter become high-power inverter. Installation of GTIL With Internal Limiter. How to use the Power Limit function? Connects/clamps to one hot wire after the Main Circuit Breaker. Converts the magnetic field created by the flow of current in the wire into small AC voltage and current which is proportional to the power that passes through the wire. This installation is not require an additional limiter module, Installation is much easier. Clamp the current sensor cable to one of the hot wire to measure the current, the internal limiter will auto detect the load power and control the inverter output power, excess power will be well controlled. Limiter Setting on the LCD of the inverter. The GTIL include three working mode:Work as normal GTI without power limitation. Work under Internal limiter mode and Work under External limiter mode, Pls make your setting on the LCD and save it, details setting operation, pls read the GTI manual. Bat or solar limited current mode. This function is usable while using with battery. The setted voltage will be the cut off voltage, this means while battery discharged to the setted voltage point or below setted point, inverter will auto disconnect from the battery and stop operating. This can prevent the battery from over discharged. The setted current means inverter will discharge the battery at this current level. MPPT function of the inverter will auto invalid when working under this setting. Set is 0.1V/step. Set is 0.1V/Step. Sellers are not responsible for service transit time. Transit times are provided by the carrier, exclude weekends and holidays, and may vary with package origin and destination, particularly during peak periods. (Only for Business Express). Feedback is very important to us. Please do not give us any bad feedback. If you can do as we say, we will be very grateful. Please give us the opportunity to resolve any problem. The item “1000W Solar Grid Tie Inverter withPower Limiter DC45-90V Pure Sine Wave Inverter” is in sale since Friday, August 14, 2020. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “eprec-us” and is located in shenzhen. This item can be shipped worldwide.

Output Wareform: Pure Sine Wave
Model: Grid Tie Inverter with Limiter
Color: Blue
MPN: Does Not Apply
Recommended Environment: Indoor
Brand: Y&H
Application: Home/Garden
Inverter Technology: Microinverter
Country/Region of Manufacture: China
System Configuration: Grid-Tie
Power Source: Solar
Power: 1000W
Charging Mode: MPPT (Maximum Power Point Tracking)
Rated Power (Peak/Continuous): 1000W / 900W
DC Input Voltage: 45V~90V
AC Output Voltage Range: 190V~260V
AC Output Frequency Range: 46Hz~65Hz
Voltage: DC45-90V
Stackable: Just for AC Output

Category: 1000w | Comments Off

October 15

SolarEdge Grid-Support 11.4kW Non-Isolated Solar Inverter withDC Shutdown Switch

SolarEdge Grid-Support 11.4kW Non-Isolated Solar Inverter w/DC Shutdown Switch. In good physical condition with some minor signs of exterior wear. Product was subject to physical inspection for signs of adverse exterior wear as well as internally for signs of damage from fire/water/exposure. Does not include any additional cables, parts or accessories. ARG-Tech directly only ships to the United States. We take pride in packing items carefully to ensure safe arrival. Please check out our other items! The item “SolarEdge Grid-Support 11.4kW Non-Isolated Solar Inverter withDC Shutdown Switch” is in sale since Tuesday, October 6, 2020. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “arg-tech” and is located in Goffstown, New Hampshire. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Pakistan, Paraguay, Reunion, Uruguay.

Size: 36 x 13 x 11
Current Rating: 47.5
Inverter Technology: Central
Model: SE11400A
Connector Type: N/A
Maximum Input Power: 15350 W
Custom Bundle: No
Wattage: 11400 – 12000 W
Current Type: DC
System Configuration: Grid-Tie
Product Line: SolarEdge Single Phase Inverters
Material: Rigid Plastic, and Aluminum
Maximum Input Voltage: 500 VDC
Power Source: Solar
Type: Charger/Inverter
Features: Indicator Light
Color: White
MPN: SE11400A-US
Recommended Environment: Outdoor
Protection Properties: Anti-Island Protection
Connector Configuration: Connector Not Included
Power: 11400-12000 W
Current Output: 47.5 A
Brand: Solaredge
Application: Back-Up Power
Maximum Flow Rate: N/A
Resistance Properties: Dust Resistant
Voltage: 500 VDC

Category: solaredge | Comments Off

October 15

2000W 3 Phase Wind Turbine Grid Tie Inverter Limiter AC 45-90V SUN 2000GTIL WAL

New Grid Tie Inverter for 3 Phase Wind Turbines. Built-in Dump Load Controller – three phase AC input from wind turbine – Single Phase AC to Grid (100V 110V 120V 220V 230V 240V) – Built-in Power Limit Function. About the Input Voltage. DC 22-65V or 45-90V The DC input range of the wind inverter , the test point should be at the DC side of the built-in rectifier of the inverter, but you can calculate from 3 phases of AC output voltage of the wind turbine to get the DC voltage, the formula is Vac = Vdc/1.732. For example, if the DC input voltage range of the inverter is 4590V, then the wind turbine’s output AC range of the should be 45/1.73290/1.732 = AC 26V 52V. The wind inverter must work with 3 phase AC model wind turbine , there should be 3 wires from the wind turbine. Another way , if the wind turbine is used to charge 24v battery , please select 22-65V inverter. If the wind turbine is used to charge 48v battery , and the highest voltage low than 65v , please select 22-65V inverter. If the 48v wind turbine highest voltage over 65v , and low than 90v , please select 45-90V inverter. Advantage Features of the 2G Wind Power Grid Tie Inverter. The 2nd Generation grid tie inverter, new technical , Higher efficiency. Higher MPPT efficiency , Max 99% Multiple intelligent protection to ensure safe use. Directly connect to three phase wind turbine, without regulator Easy to install and easy to operate. The Electric meter will SLOW down. The wind grid tie power inverter can obtain the wind energy from wind turbine, and can tie to the grid through its output cables with no extra equipment. The installation is very convenient and reliable. The inverter can be connected to any outlets of utility grid at house. The small grid tie inverter monitors the volume, frequency and phase of the home utility grid, then produce pure sine wave AC power that the frequency and phase are as same as the grid’s, and the volume is a bit higher than the grid’s, then according to the current controlled PWM, to control the output power to the grid. The small grid tie inverter just puts out power when the home grid is on. When the wind turbine is rotating, and the output of the voltage is in the range of the rated input voltage of the inverter, the wind turbine will produces power, and the grid tie inverter will change the power from wind turbine to the home grid. When the total power of electric apparatus that are using in the house is larger than the output power of the inverters, these power from the inverters will be consumed in the house, this will slow down the power meter, otherwise, the difference of the output power of the inverter between the total used power of the apparatus will go out from the house to the out grid. Why our grid tie inverters need limit function? — It is in response to the overwhelming clamor from our customers for a function that can control the amount of power that the grid tie inverters can generate. With this function, the inverters will just generate power that is not larger than the loads power even the inverters are connected with big power solar panel array, we call it limit function. Because in some countries, the producer pays for the excess power it gives to the distribution grid. This is because the electric power meter(the one provided by the electricity provider in the area) is not aware of the direction of power flow. In other words it only adds even if power is exported to the grid, thus, the consumer will be charged for power even if it is given to the grid, and this is the problem. Our SUN G2 series grid tie inverters are integrated this limit function, so SUN G2 series inverters can work in limit mode or normal mode(no limit), you can make the configuration on the LCD display. Input AC/DC Voltage Range. DC 45V 90V (after regulator). AC Output Voltage Range. Dimensions (W x H x D). 469 x 196 x 88 mm. (1) (2) Dump load resistor connection Terminal. This terminals will connect to the dump load resistor. (3) AC socket, This socket will connect the inverter to the public grid via the AC cable. This terminals will connect to the wind turbine. Wind power grid tie inverter —- 1pcs , 2. Dump load resistor —1pcs , 3. AC cable –1pcs , 4. Limiter sensor/clamp / cable —- optional. Q: Can this inverter work if power off? Grid tie inverter will stop to work if the grid is off. Q :Can this inverter be connected in Parallel? A : Yes, the grid tie inverter is stackable. You may connect two or more inverters to one big wind turbine. Certification : CE Rohs EN50438. GAIA NEW ENERGY is your trusted partner for long term business. We arethe MANUFACUTER of the solar inverter. We are responsible forthe quality of the inverter. The inverter has 2 years guarantee. All return items must be in their original condition. Please do contact with us for return address, details and any other issues. Learning about the duty policy. Please leave us message if you have any question, we will reply in 24 hours, thank you! The item “2000W 3 Phase Wind Turbine Grid Tie Inverter Limiter AC 45-90V SUN 2000GTIL WAL” is in sale since Sunday, September 13, 2020. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “ming721″ and is located in NingBo. This item can be shipped to North, South, or Latin America, all countries in Europe, Australia.

Current Rating: 21-30 A
Model: SUN-2000GTIL-LCD
Current Type: DC
System Configuration: Grid-Tie
Power Source: Wind
Type: Charger/Inverter
Features: Automatic Voltage Detection
MPN: SUN-2000GTIL-LCD
Power: 1801-2000 W
Current Output: 10 A or Less
Brand: SUN
Application: Home/Garden
Charging Mode: MPPT (Maximum Power Point Tracking)
Voltage: 45-90V

Category: 2000w | Comments Off

October 14

SolarEdge 11KW GRID-TIED Inverter Model SE11400A-US NEW FACTORY BOX NO RESERVE

>>>>>>>> GO SOLAR FORGET YOUR ELECTRIC BILL. Fixed-voltage inverter designed specifically for use with SolarEdge power optimizers Integrated arc fault protection (Type 1) for NEC 2011 690.11 compliance Superior efficiency Small, lightweight and easy to install Built-in module-level monitoring. The SolarEdge PV inverter combines sophisticated digital control technology with efficient power conversion architecture to achieve superior solar power harvesting and best-in-class reliability. A proprietary data monitoring receiver has been integrated into the single-phase solar inverter and aggregates the power optimizer performance data from each PV module. This data can be transmitted to the web and accessed via the SolarEdge monitoring platform for performance analysis, fault detection and troubleshooting of PV systems. Single Phase Inverter Feature highlights. Solar inverters specifically designed to work with power optimizers. Small, lightweight and easy to install. Built-in module-level monitoring receiver. Communication to internet via broadband or wireless ZigBee. IP65 / NEMA 3R? Outdoor and indoor installation. Integrated arc fault protection and rapid shutdown for NEC 2014 and 2017 690.11 and 690.12. Optional integrated revenue grade data, ANSI C12.20. Maximum Input String Voltage. Number of String Inputs. Dimensions (LxWxH): 12.5 × 30.5 × 10.5 inches. Maximum efficiency greater than 98%. Integrated arc fault Protection for NEC 2011 690.11 compliance. Communication to internet via Ethernet or Wireless. Rapid shutdown compliant for NEC 2014 690.12. SolarEdge inverters are designed to work exclusively with SolarEdge power optimizers. MPPT tracking and voltage management is handled by the power optimizers allowing for a very high efficiency, low cost inverter. These inverters operate at a fixed voltage supplied by the SolarEdge Power Optimizers, are lightweight, and have built-in Module-Level Monitoring. This connection can be hardwired, or connected with the Zigbee Gateway Device and Antenna or through cellular communication utilizing a GSM Cellular Card. They include an integrated code-compliant DC disconnect, Ethernet interface, and RS-485 serial port. All SolarEdge inverters are listed to UL 1741 and UL 1699B for the U. And Canada and are NEMA 3R rated. The inverters are rated for use from -13 °F to +140 °F temperatures. The optimizers automatically limit the DC voltage to 1 VDC per module when detecting excessive heat, or when the inverter is not connected to the grid, improving installer and firefighter safety. The item “SolarEdge 11KW GRID-TIED Inverter Model SE11400A-US NEW FACTORY BOX NO RESERVE” is in sale since Sunday, October 11, 2020. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “cabaja” and is located in Spring Valley, California. This item can be shipped to United States.

Model: SE11400A-US
Custom Bundle: No
Wattage: 10000-14999 W
System Configuration: Grid-Tie
MPN: SE11400A-US
Brand: Solaredge
Application: Home/Garden
Non-Domestic Product: No
Modified Item: No

Category: solaredge | Comments Off

October 14

Trace engineering Suntie XR ST2500 photovoltaic power grid tie inverter 2500W

Item has been in storage for some time. Does not ever appear to have been hooked up or used. Listing as new other. Item will have dust dirt and scratches from storage. Reasonable offer owns it. Check out my other auctions for more inverters. The item “Trace engineering Suntie XR ST2500 photovoltaic power grid tie inverter 2500W” is in sale since Thursday, October 8, 2020. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “total_com” and is located in Palmyra, New York. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Pakistan, Paraguay, Reunion, Uruguay.

System Configuration: Grid-Tie
Brand: Trace

Category: trace | Comments Off

October 13

3000W 24V Solar Hybrid Power Inverter 80A MPPT Charge Controller on/off Grid Tie

3000W 24V Solar Hybrid Power Inverter 80A MPPT Charge Controller on/off Grid Tie PV System PH18-3024 PLUS. 3KW 24V High Frequency On/Off Grid Hybrid Solar Inverter. Pure Sine Wave Power Inverter. Parallel board optional. CE IEC approved. High Frequency on/off hybrid solar inverter. PH1800 PLUS SERIES (2KW-5KW). PH1800 Plus series hybrid solar inverter, it can realize self-consumption and feed-in to the grid from solar energy with best solution according to your setting. During the daytime solar power can run your home appliances and if there is extra solar power it will feed-in to the grid or you can choose to save them on the battery to backup when power failure or nighttime. Rated Power 2KW-5.5KW. Pure sine wave output. Self-consumption and Feed-in to the grid. Programmable supply priority for PV, Battery or Grid. User-adjustable battery charging current suits different types of batteries. Programmable multiple operation modes: Grid-tie, off-grid and grid-tie with backup. Multiple communication for USB, RS-485, Modbus. Monitoring software & Wifi Kit for real-time status display and control. Parallel operation up to 3 units. You can download this app on your cellphone and monitor the whole system, you will know know how much electricity the system generate and sell to utility. SERIES INTELLIGENT WORKING MODE. However, the PV energy system continues to operate during a grid outage. The batteries provide quiet, uninterrupted back-up power for loads such as refrigerators, lights, pumps, and computers, while your PV array continues to produce power and charge the batteries during the day. When the grid is restored, the inverter/chargers help recharge the batteries to their full state of charge while the grid powers all AC loads. Nominal Battery System Voltage. AC Voltage Regulation ï¼^ Batt. THD ï¼^ Linear loads ï¼? Inverter Efficiency ï¼^ Peak ï¼? 10ms(For PC) 20ms(For Other Home Appliance). 170280VAC(For Personal Computers), 90280VAC(For Home Appliances), 184253VAC(VDE4105). Maximum PV Array Open Circuit Voltage. PV Array MPPT Voltage Range. Maximum Solar Charge Current. Maximum AC Charge Current. Machine Dimensions (WHD)(mm). Net Weight ï¼^ Kg ï¼? Package Dimensions(WHD)(mm). Gross Weight ï¼^ Kg ï¼? 5% to 95% Relative Humidity (Non-condensing). This is 3000w 24v hybrid solar inverter (on/off grid) , If you need 5000w 48v inverter , please check this link. CE ROHS IEC Certification. Please do not choose a cheap power inverter. Low-cost power inverter use low-quality components, low efficiency, poor stability. Poor quality power inverter might damage the appliances, and even cause fires and explosions. Please select CE or other certified products. GAIA NEW ENERGY is your trusted partner for long term business. We arethe MANUFACUTER of the solar inverter. We are responsible forthe quality of the inverter. The inverter has 2 years. And service for the inverter the whole life. Brand new condition and work perfectly. All return items must be. In their original condition. With us for return address, details and any other issues. Without communication is a violation of feedback policy. Please leave us message if you have any question, we will reply in 24 hours, thank you! We reserve the right to cancel any order for any reason at any time. We are not responsible for undeliverable addresses. Orders are tracked and sent from China. Your feedback very important to us, after you get your package and you are. Satisfied with our service. If you have any problem with your order / any questions please before leave any type of feedback. Thank you for shopping at our store. The item “3000W 24V Solar Hybrid Power Inverter 80A MPPT Charge Controller on/off Grid Tie” is in sale since Wednesday, June 3, 2020. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “anita-likes” and is located in China. This item can be shipped to United States.

Manufacturer: manufacturer
Model: model
Brand: FIG
UPC: 726084482791
ISBN: Does not apply
EAN: Does not apply
MPN: Does not apply
is_customized: Yes
Floating Charge Voltage: 27.4VDC
Output Wave form: Pure Sine Wave
Brand Name: FIG
Weight: 9.5kg
Maximum PV Array Open Circuit Voltage: 145V
Maximum Solar Charge Current: 80A
PV Array MPPT Voltage Range: 30~130VDC
Model Number: PH18-3024-Plus
Output Type: Single
Output Voltage: 220VAC/230VAC/240VAC
Output Power: 1 – 200KW
Normal Voltage: 24V
Rated Power: 3000w
Overcharge Protection: 30V
Inverter Efficiency: 93%
Type: DC/AC Inverters
Output Current: 13A
Output Frequency: 50hz 60hz auto
Size: 272*355*100mm

Category: 3000w | Comments Off

October 13

1400W LED Solar Grid Tie Inverter 18V-50V to 120V 230V MPPT Micro Waterproof

Micro Solar Grid Inverter 120V 230V 1400W with Receiver SG1400MQ. SG1400MQ 120V 230V 1400W micro solar inverter, LED display, more clear and intuitive. IP65 protection class, good dustproof and waterproof performance. With protection function, voltage protection, frequency protection, temperature protection, current protection, etc. Natural convection cooling method, no fan. Comes with a pack of screws for easier installation and saving effort. Item Type: Micro Inverter. Product Series: SG series. Input Data (DC, PV). Number Of Input MC4 Connectors: 4 sets. MPPT Voltage Range: 24V-40V. Working Voltage Range: 18V-50V. Maximum Input Voltage: 50V. Maximum Input Power: 4 x 350W. Maximum Input Current: 4 x 14A. Single-Phase Grid Type: 120V & 230V. Rated Output Power: 1350W. Maximum Output Power: 1400W. Nominal Output Current: At 120VAC: 11.25A/ At 230VAC: 5.86A. Nominal Output Voltage: 120VAC / 230VAC. Default Output Voltage Range: At 120VAC: 80V-160V / At 230VAC: 180V-280V. Nominal Output Frequency: 50Hz / 60Hz. Default Output Frequency Range: At 50Hz: 47.5Hz-52.5Hz/ At 60Hz: 57.5Hz-62.5Hz. Power Factor: > 0.99. Total Harmonic Distortion: THD. Maximum Units Per Branch: At 120VAC: 3 Units / At 230VAC: 6 units. CEC Weighted Efficiency: At 120VAC: 92.5% / At 230VAC: 93.5%. MPPT Nominal Efficiency: 99.9%. Working Environment Temperature Range: -40 + 65. Storage Temperature Range: -40 + 85. AC Bus Cable Maximum Current: 40A. Communication Method: 2.4G. Output Connector (length unit is cm, left male M, right female F): M24 + F175. Cooling Method: Natural convection, no fan. 1 Pack of Screws. 1 x Instruction Manual. Instead of leaving negative/neutral feedback or opening a dispute. Our listing price includes the value of goods, packaging cost, and export. Please check with your country’s. We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. Post a message again because sometimes our message system may block some emails. If you are satisfied with our service, pls. Our aim is to provide Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy. We will do our up most to exceed your expectations in customer service, communication and dispatching of your orders. The item “1400W LED Solar Grid Tie Inverter 18V-50V to 120V 230V MPPT Micro Waterproof” is in sale since Friday, May 8, 2020. This item is in the category “Consumer Electronics\Vehicle Electronics & GPS\Car Electronics Accessories\Power Inverters”. The seller is “goodsbetter” and is located in Shenzhen. This item can be shipped worldwide.

Waterproof Rating: IP65
Maximum Input Voltage: 50V
Cooling Method: Natural convection, no fan
MPN: Does Not Apply
Product Series: SG series
Item Type: Micro Inverter
Brand: Unbranded
Starting Voltage: 18V
Type: Modified Sine Wave Inverter
Voltage: 50V
Model: SG1400MQ
MPPT Voltage Range: 24V-40V
Communication Method: 2.4G
Features: AC/DC
Working Voltage Range: 18V-50V

Category: 1400w | Comments Off

October 12

Aunisol Auni Sunwave 6000 6kW Grid Tie Solar Inverter 3 x MPPT USB

3 x MPPT input. User installation guide (English). The max input for each MPPT is 600v (nominal is 430v) so just add up the voltages of each panel until you are near to 430v. As there are 3 MPPT inputs you can do this 3 times up to a maximum of 6-7kW. Item has ever been fitted, just pics taken from open box and inspection of goods. The item “Aunisol Auni Sunwave 6000 6kW Grid Tie Solar Inverter 3 x MPPT USB” is in sale since Friday, October 9, 2020. This item is in the category “Home, Furniture & DIY\DIY Materials\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “sonic-fiend” and is located in worcester, Worcestershire. This item can be shipped to United Kingdom, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, United States, Bahrain, Canada, New Zealand, China, Israel, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Bangladesh, Bermuda, Bolivia, Barbados, Brunei darussalam, Egypt, Guernsey, Gibraltar, Guadeloupe, French guiana, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Sri lanka, Macao, Monaco, Maldives, Martinique, Nicaragua, Oman, Pakistan, Paraguay, Reunion, Saudi arabia, South africa, United arab emirates, Ukraine, Chile, Bahamas, Colombia, Costa rica, Guatemala, Honduras, Jamaica, Kuwait, Panama, Qatar, Trinidad and tobago, Uruguay.

Country/Region of Manufacture: France
Wattage: 6000
System Configuration: Grid-Tie
Power Source: Solar
Recommended Environment: Indoor/Outdoor
Brand: Aunisol
Voltage Input: 230v

Category: aunisol | Comments Off

October 12

1000W MPPT Solar Grid Tie Inverter with Power Limiter DC22-60V, AC110V/220V Auto

1000W MPPT Solar Grid Tie Inverter with Power Limiter DC22-60V, AC110V/220V Auto. Grid Tie Inverter DC Input 22-60V(Starting Voltage:26V). Grid Tie Inverter with Limiter Sensor. Delivers only the power needed by the load. Voc (solar panel) must not exceed 60V to ensure good output efficiency. Battery discharge power mode, Can auto regulate depth of discharge of the battery bank. Micro Inverter Max Power Point Tracking and AC Stackable, Anti-island protection. Intelligent LCD display various parameters. 1000W Grid Tie Inverter converts DC power produced by Solar Panels to AC, connects to the grid and feed all of the power available from the panels to the AC load. Smart Micro inverter is synchronized and in-phase with the utility grid. The electric apparatus in the house will use power from the inverter first. If the Solar Panel is producing less power and the GTI cannot deliver all the power needed by the load, then power will be supplemented by the Grid. Why we produced the GRID TIE INVERTER WITH LIMITER? It is in response to the overwhelming clamor from our customers for a product that can control the amount of power that the grid tie inverters (GTI) can generate so that the amount of excess power produced by the solar panels are reduced to insignificant levels, if not eliminated — because in some countries, the producer pays for the excess power it gives to the distribution grid. This is because the electric power meters (the one provided by the electricity provider in the area) are not aware of the direction of power flow. In other words it only adds even if power is exported to the grid, thus, the consumers will be charged for power even if it is given to the grid, and this is the problem. This is the 2nd generation grid tie inverter with limiter. But in case customer install inverter far away from the main circuit breaker, we also enable the 2nd GTIL work with stand-alone limiter, we call this-external limiter. For sure, the inverter can work under normal Grid tie-no limit mode, just set on the nice LCD and save your setting. The 22-60V model inverter will start up at 26V, after starting, the inverter can work in 22V-60V. Solar Panel Voc cannot be higher than 60V. Vmp 30v-48v Solar panels connected in Parallel suggested, for example : 4 pcs 200-260w (Vmp 31v solar panels in parallel). Rated Power (Peak/Continuous): 1000W / 900W. DC Input Voltage: 22V60V. Peak Power Tracking Voltage: 2654V. AC Output Voltage Range. Grid Tie Power Inverter starting voltage:26V. AC Output Frequency Range: 46Hz65Hz. Stackable: Just for AC Output. Output Wareform: Pure sine wave. 1 x On Grid Inverter with Limiter(built-in) 1 x AC cable 1 x Internal type Limiter clamp with sensor & 2m cable 1 x English User Manual. Stackable connectionThe purpose is let small power inverter become high-power inverter. Installation of GTIL With Internal Limiter. How to use the Power Limit function? Connects/clamps to one hot wire after the Main Circuit Breaker. Converts the magnetic field created by the flow of current in the wire into small AC voltage and current which is proportional to the power that passes through the wire. This installation is not require an additional limiter module, Installation is much easier. Clamp the current sensor cable to one of the hot wire to measure the current, the internal limiter will auto detect the load power and control the inverter output power, excess power will be well controlled. Limiter Setting on the LCD of the inverter. The GTIL include three working mode:Work as normal GTI without power limitation. Work under Internal limiter mode and Work under External limiter mode, Pls make your setting on the LCD and save it, details setting operation, pls read the GTI manual. Bat or solar limited current mode. This function is usable while using with battery. The setted voltage will be the cut off voltage, this means while battery discharged to the setted voltage point or below setted point, inverter will auto disconnect from the battery and stop operating. This can prevent the battery from over discharged. The setted current means inverter will discharge the battery at this current level. MPPT function of the inverter will auto invalid when working under this setting. Set is 0.1V/step. Set is 0.1V/Step. Sellers are not responsible for service transit time. Transit times are provided by the carrier, exclude weekends and holidays, and may vary with package origin and destination, particularly during peak periods. (Only for Business Express). Feedback is very important to us. Please do not give us any bad feedback. If you can do as we say, we will be very grateful. Please give us the opportunity to resolve any problem. The item “1000W MPPT Solar Grid Tie Inverter with Power Limiter DC22-60V, AC110V/220V Auto” is in sale since Friday, August 14, 2020. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “eprec-us” and is located in shenzhen. This item can be shipped worldwide.

AC Output Frequency Range: 46Hz~65Hz
Stackable: Just for AC Output
Output Wareform: Pure Sine Wave
Model: Grid Tie Inverter with Limiter
Color: Blue
MPN: Does Not Apply
Brand: Y&H
Application: Home/Garden
Inverter Technology: Microinverter
Country/Region of Manufacture: China
System Configuration: Grid-Tie
Power Source: Solar
Power: 1000W
Charging Mode: MPPT (Maximum Power Point Tracking)
Rated Power (Peak/Continuous): 1000W / 900W
DC Input Voltage: 22V~60V
Peak Power Tracking Voltage: 26~54V
AC Output Voltage Range: 110V/220V Auto
Voltage: DC22-60V
Grid Tie Power Inverter starting voltage: 26V

Category: 1000w | Comments Off

October 11

Fronius Primo 6.0-1 208-240 6KW Solar Inverter with Web Interface

The transformerless Fronius Primo is the ideal compact single-phase inverter for residential applications. The sleek design is equipped with the SnapINverter hinge mounting system which allows for lightweight, secure and convenient installation. The Fronius Primo has several integrated features that set it apart from competitors including dual powerpoint trackers, high system voltage, a wide input voltage range, Wi-Fi and SunSpec Modbus interface, and Fronius online and mobile monitoring platform Fronius Solar. The Fronius Primo also works seamlessly with the Fronius Rapid Shutdown Box for a reliable NEC 2014 690.12 and NEC 2017 690.12(B)(1) solution. Number of MPPT: 2.0. Recommended PV Power (kWp): 4.8 9.3 kWp. Usable input current: 18.0 / 18.0 A. Usable input current total (MPPT1 + MPPT2): 36.0 A. Array short circuit current (1.5 Imax): 27 / 27 A. Nominal input voltage: 420.0 V. Operating voltage range: 80 – 600 V. MPP Voltage Range: 240 – 480 V. Input voltage: 600 V (1000 V optional). Output power 240 V: 6000 VA. Output power 208 V: 6000 VA. Output configuration: 1 NPE 208 / 240 V. Frequency range: 45 – 66 Hz. Nominal operating frequency: 60.0 Hz. Total harmonic distortion: 5 %. Power factor range: 0.85 – 1 ind. Continuous output current 240 V. Continuous output current 208 V. OCPD/AC breaker size 240 V: 35 A. OCPD/AC breaker size 208 V: 40 A. CEC efficiency 240 V: 96.0 %. CEC efficiency 208 V: 96.0 %. Dimension (width): 1.41 ft. Dimension (height): 2.06 ft. Dimension (depth): 8.11 in. Elevation: 4000 m (13120 ft) with a max. Input voltage of 1000 V. Certificates and compliance with standards. 107.1-16, UL1699B Issue 2 -2013, CSA TIL M-07 Issue 1 2013. DC connection terminals: 4x DC+ and 4x DC- screw terminals for copper (solid/stranded/fine stranded) or aluminium (solid/stranded). AC connection terminals: Screw terminals 12 – 6 AWG. Revenue Grade Metering: Optional (ANSI C12.1 accuracy). Wi-Fi / Ethernet LAN: Wireless standard 802.1 1 b/g/n / Fronius Solar. Web, SunSpec Modbus TCP, JSON. USB (A socket) Datalogging and inverter update possible via USB. 2x RS422 (RJ45 socket). Datalogger and webserver Included. Serial RS485 SunSpec Modbus RTU. 6 inputs and 4 digital I/Os: Load management; signaling, multipurpose I/O. The item “Fronius Primo 6.0-1 208-240 6KW Solar Inverter with Web Interface” is in sale since Tuesday, October 6, 2020. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “solarflutes” and is located in Leesburg, Virginia. This item can be shipped to United States.

Brand: Fronius
Model: FRONIUS PRIMO 6.0-1
Power Source: Solar
Custom Bundle: No
System Configuration: Grid-Tie
Inverter Technology: String
MPN: PRIMO601

Category: fronius | Comments Off

October 2020
M	T	W	T	F	S	S
« Sep				Nov »
			1	2	3	4
5	6	7	8	9	10	11
12	13	14	15	16	17	18
19	20	21	22	23	24	25
26	27	28	29	30	31